Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELLO! BOOT0 is starting!
- boot0 version : 4.0.0
- boot0 commit : 368945ad3c87c1814bfe3eea5aab3ffc0e9d2d5c
- fel_flag = 0x00000000
- rtc[0] value = 0x00000000
- rtc[1] value = 0x00000000
- rtc[2] value = 0x00000000
- rtc[3] value = 0x00000000
- rtc[4] value = 0x00000000
- rtc[5] value = 0x00000000
- rtc[6] value = 0x00000000
- rtc[7] value = 0x00000000
- DRAM DRIVE INFO: V1.3
- the chip id is 0x00000081
- the chip id is 0x00000081
- the chip id is 0x00000081
- the chip id is 0x00000081
- the chip id is 0x00000081
- READ DQS LCDL = 001b1c1c
- DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM CLK = 672 MHz
- DRAM zq value: 003b3bfb
- DRAM dram para1: 10f40400
- DRAM dram para2: 00000000
- DRAM workmode1: 000009f4
- DRAM SIZE =1024 M
- odt delay
- dram size =1024
- card boot number = 0
- card no is 0
- sdcard 0 line count 4
- [mmc]: mmc driver ver 2015-04-13 16:07:39
- [mmc]: ***Try SD card 0***
- [mmc]: SD/MMC Card: 4bit, capacity: 61056MB
- [mmc]: vendor: Man 001b534d Snr a2b80638
- [mmc]: product: 00000
- [mmc]: revision: 1.0
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- The size of uboot is 000e4000.
- sum=a49ee667
- src_sum=a49ee667
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- SUNXI_NORMAL_MODE
- [ 0.376]e mode
- U-Boot 2011.09-rc1-00000-g4dfa732-dirty (May 04 2016 - 03:38:08) Allwinner Technology
- [ 0.385]version: 1.1.0
- [ 0.388]uboot commit : 4dfa7327b40df5f1632ddc50a116e0ea0a809484
- normal mode
- [ 0.399]pmbus: ready
- not set main pmu id
- axp_probe error
- [board_vendor] vid_used not used
- [ 0.417]PMU: pll1 1008 Mhz,PLL6=600 Mhz
- AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
- sid read already
- fel key new mode
- run key detect
- no key found
- no key input
- dram_para_set start
- dram_para_set end
- normal mode
- [ 0.448]DRAM: 1 GiB
- relocation Offset is: 35af0000
- [box standby] read rtc = 0x0
- [box_start_os] mag be start_type no use
- user_gpio config
- user_gpio ok
- gic: normal or no secure os mode
- workmode = 0
- MMC: 0
- [ 0.526][mmc]: mmc driver ver 2015-04-13 14:50:00
- [ 0.531][mmc]: get sdc_phy_wipe fail.
- [ 0.535][mmc]: get sdc0 sdc_erase fail.
- [ 0.539][mmc]: get sdc_f_max fail,use default 50000000Hz
- [ 0.544][mmc]: get sdc_ex_dly_used fail,use default dly
- [ 0.550][mmc]: SUNXI SD/MMC: 0
- [ 0.563][mmc]: *Try SD card 0*
- [ 0.596][mmc]: CID 0x1b534d30 0x30303030 0x10a2b806 0x3800f96b
- [ 0.601][mmc]: mmc clk 50000000
- [ 0.605][mmc]: SD/MMC Card: 4bit, capacity: 61056MB
- [ 0.610][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
- [ 0.615][mmc]: ***SD/MMC 0 init OK!!!***
- [ 0.619][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
- [ 0.625][mmc]: secure_feature 0x0
- [ 0.628][mmc]: secure_removal_type 0x0
- [ 0.632]sunxi flash init ok
- script config pll_de to 864 Mhz
- Not Found clk pll_video1 in script
- script config pll_video to 297 Mhz
- script config pll_periph0 to 600 Mhz
- [boot]disp_init_tv
- [DISP_TV] disp_init_tv enter g_tv_used
- screen 0 do not support TV TYPE!
- [BOOOT_DISP_TV] disp tv device_registered
- unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
- enable power vcc-hdmi-18, ret=-1
- DRV_DISP_Init end
- [disk_read_fs] no the partition
- error: open tv_vdid.fex, maybe it is not exist
- [disk_read_fs] no the partition
- error: open disp_rsl.fex, maybe it is not exist
- [disk_read_fs] no the partition
- error: open disp_rsl.fex, maybe it is not exist
- boot_disp.auto_hpd=1
- auto hpd check has 0 times!
- not support mode[4], use inline mode[4]
- attched ok, mgr0<-->device0, type=4, mode=4----
- ready to set mode
- [ 1.256]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:6-
- -name- -start- -size-
- boot-res : 1000000 2000000
- env : 3000000 1000000
- boot : 4000000 1000000
- rootfs : 5000000 20000000
- klog : 25000000 1000000
- UDISK : 26000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- key 0
- cant find rcvy value
- cant find fstbt value
- no misc partition is found
- to be run cmd=run setargs_mmc boot_normal
- [ 1.325][mmc]: MMC Device 2 not found
- [ 1.329][mmc]: Can not find mmc dev
- [ 1.332][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
- sunxi_secstorage_read fail
- get secure storage map err
- check user data form private
- the private part isn't exist
- WORK_MODE_BOOT
- adver not need show
- sunxi_bmp_logo_display
- f_read btr over hd12896
- read byte = 2764854
- [ 1.499]screen_id =0, screen_width =1280, screen_height =720
- [ 1.504]frame buffer address 46400036
- [ 1.508]Hit any key to stop autoboot: 0
- [ 4.764][mmc]: MMC Device 2 not found
- ** Invalid boot device **
- [ 4.774][mmc]: blkcnt should not be 0
- Loaded environment from uEnv.txt
- Running uenvcmd ...
- Banaan Pi bpi-m2p chip: h3 Service: linux
- ** Unable to read "bananapi/berryboot.img" from mmc 0:1 **
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.4.39+
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 7045824 Bytes = 6.7 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- [ 5.228][mmc]: MMC Device 2 not found
- [ 5.232][mmc]: mmc not find,so not exit
- [ 5.236]
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 1024MB
- ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
- ion_reserve_common: ion reserve: [0x70000000, 0x80000000]!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.39+ (ssvb@i7) (gcc version 4.7.4 (Gentoo 4.7.4 p1.4, pie-0.5.5) ) #1 SMP PREEMPT Wed Dec 9 07:24:09 EET 2015
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: CMA: reserved 256 MiB at 70000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 262144
- [ 0.000000] free_area_init_node: node 0, pgdat c0d2e280, node_mem_map c0e09000
- [ 0.000000] Normal zone: 1404 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 900 pages used for memmap
- [ 0.000000] HighMem zone: 101500 pages, LIFO batch:31
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1720000 s11840 r8192 d12736 u32768
- [ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
- [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M loglevel=8 bootm2
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1024MB = 1024MB total
- [ 0.000000] Memory: 761572k/761572k available, 287004k reserved, 147456K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc09010b0 (9189 kB)
- [ 0.000000] .init : 0xc0902000 - 0xc0cb6e40 (3796 kB)
- [ 0.000000] .data : 0xc0cb8000 - 0xc0d33220 ( 493 kB)
- [ 0.000000] .bss : 0xc0d33244 - 0xc0e084c8 ( 853 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001311] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.001380] pid_max: default: 32768 minimum: 301
- [ 0.001730] Mount-cache hash table entries: 512
- [ 0.002745] Initializing cgroup subsys cpuacct
- [ 0.002783] Initializing cgroup subsys freezer
- [ 0.002839] CPU: Testing write buffer coherency: ok
- [ 0.002914] ftrace: allocating 24652 entries in 73 pages
- [ 0.040280] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.040324] [sunxi_smp_prepare_cpus] enter
- [ 0.040375] Setting up static identity map for 0x406593c0 - 0x40659418
- [ 0.041318] CPU1: Booted secondary processor
- [ 0.041318] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.041452] CPU2: Booted secondary processor
- [ 0.041452] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.041452] CPU3: Booted secondary processor
- [ 0.041452] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.050188] Brought up 4 CPUs
- [ 0.050300] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.050979] devtmpfs: initialized
- [ 0.054066] wakeup src cnt is : 1.
- [ 0.054092] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
- [ 0.054125] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
- [ 0.054158] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
- [ 0.054192] sunxi pm init
- [ 0.054332] pinctrl core: initialized pinctrl subsystem
- [ 0.066986] NET: Registered protocol family 16
- [ 0.067866] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.067866] script_sysfs_init success
- [ 0.067866] sunxi_dump_init success
- [ 0.067866] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.067866] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.067866] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.067866] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.067866] script config pll_video to 297 Mhz
- [ 0.067866] script config pll_de to 864 Mhz
- [ 0.067866] script config pll_ve to 402 Mhz
- [ 0.067866] sunxi_default_clk_init
- [ 0.067866] try to set pll6ahb1 to 200000000
- [ 0.067866] try to set ahb clk source to pll6ahb1
- [ 0.067866] set ahb clk source to pll6ahb1
- [ 0.067866] try to set ahb1 to 200000000
- [ 0.067866] try to set apb1 to 100000000
- [ 0.067866] ===fe3o4==== sunxi_root_procfs_attach ret:0
- [ 0.080252] bio: create slab <bio-0> at 0
- [ 0.080428] [ARISC] :sunxi-arisc driver v1.04
- [ 0.090313] [ARISC] :arisc version: [v0.1.34]
- [ 0.169918] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
- [ 0.171549] SCSI subsystem initialized
- [ 0.171549] usbcore: registered new interface driver usbfs
- [ 0.171549] usbcore: registered new interface driver hub
- [ 0.180046] usbcore: registered new device driver usb
- [ 0.180177] twi_chan_cfg()335 - [twi0] has no twi_regulator.
- [ 0.180206] twi_chan_cfg()335 - [twi1] has no twi_regulator.
- [ 0.180233] twi_chan_cfg()335 - [twi2] has no twi_regulator.
- [ 0.180857] Linux video capture interface: v2.00
- [ 0.181087] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.181639] Bluetooth: Core ver 2.16
- [ 0.181691] NET: Registered protocol family 31
- [ 0.181714] Bluetooth: HCI device and connection manager initialized
- [ 0.181743] Bluetooth: HCI socket layer initialized
- [ 0.181766] Bluetooth: L2CAP socket layer initialized
- [ 0.181813] Bluetooth: SCO socket layer initialized
- [ 0.182062] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.182151] Switching to clocksource arch_sys_counter
- [ 0.194579] FS-Cache: Loaded
- [ 0.194896] CacheFiles: Loaded
- [ 0.205762] NET: Registered protocol family 2
- [ 0.206069] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.206680] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.208468] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.209476] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.209505] TCP: reno registered
- [ 0.209528] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.209583] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.209913] NET: Registered protocol family 1
- [ 0.210340] RPC: Registered named UNIX socket transport module.
- [ 0.210372] RPC: Registered udp transport module.
- [ 0.210394] RPC: Registered tcp transport module.
- [ 0.210416] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 2.614035] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 2.614199] sunxi_reg_init enter
- [ 2.615032] audit: initializing netlink socket (disabled)
- [ 2.615099] type=2000 audit(2.610:1): initialized
- [ 2.616216] highmem bounce pool size: 64 pages
- [ 2.617892] NTFS driver 2.1.30 [Flags: R/W].
- [ 2.618034] fuse init (API version 7.18)
- [ 2.618500] msgmni has been set to 1199
- [ 2.619696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 2.619738] io scheduler noop registered
- [ 2.619760] io scheduler deadline registered
- [ 2.619844] io scheduler cfq registered (default)
- [ 2.620296] gpio_pin_1(12) gpio_request
- [ 2.620428] gpio_pin_2(11) gpio_request
- [ 2.620537] gpio_pin_3(6) gpio_request
- [ 2.620649] gpio_pin_4(13) gpio_request
- [ 2.620745] gpio_pin_5(14) gpio_request
- [ 2.620849] gpio_pin_6(1) gpio_request
- [ 2.620946] gpio_pin_7(16) gpio_request
- [ 2.621044] gpio_pin_8(0) gpio_request
- [ 2.621143] gpio_pin_9(3) gpio_request
- [ 2.621244] gpio_pin_10(15) gpio_request
- [ 2.621341] gpio_pin_11(68) gpio_request
- [ 2.621440] gpio_pin_12(64) gpio_request
- [ 2.621535] gpio_pin_13(65) gpio_request
- [ 2.621645] gpio_pin_14(2) gpio_request
- [ 2.621740] gpio_pin_15(66) gpio_request
- [ 2.621837] gpio_pin_16(67) gpio_request
- [ 2.621934] gpio_pin_17(71) gpio_request
- [ 2.622037] gpio_pin_18(19) gpio_request
- [ 2.622133] gpio_pin_19(18) gpio_request
- [ 2.622230] gpio_pin_20(7) gpio_request
- [ 2.622327] gpio_pin_21(8) gpio_request
- [ 2.622433] gpio_pin_22(354) gpio_request
- [ 2.622542] gpio_pin_23(9) gpio_request
- [ 2.622645] gpio_pin_24(10) gpio_request
- [ 2.622745] gpio_pin_25(356) gpio_request
- [ 2.622852] gpio_pin_26(17) gpio_request
- [ 2.622951] gpio_pin_27(21) gpio_request
- [ 2.623051] gpio_pin_28(20) gpio_request
- [ 2.623151] gpio_pin_29(362) gpio_request
- [ 2.623261] gpio_pin_30(355) gpio_request
- [ 2.623402] gpio name is PA12, ret = 0
- [ 2.623546] gpio name is PA11, ret = 0
- [ 2.623679] gpio name is PA6, ret = 0
- [ 2.623813] gpio name is PA13, ret = 0
- [ 2.623946] gpio name is PA14, ret = 0
- [ 2.624079] gpio name is PA1, ret = 0
- [ 2.624210] gpio name is PA16, ret = 0
- [ 2.624350] gpio name is PA0, ret = 0
- [ 2.624478] gpio name is PA3, ret = 0
- [ 2.624608] gpio name is PA15, ret = 0
- [ 2.624749] gpio name is PC4, ret = 0
- [ 2.624885] gpio name is PC0, ret = 0
- [ 2.625025] gpio name is PC1, ret = 0
- [ 2.625160] gpio name is PA2, ret = 0
- [ 2.625294] gpio name is PC2, ret = 0
- [ 2.625438] gpio name is PC3, ret = 0
- [ 2.625593] gpio name is PC7, ret = 0
- [ 2.625730] gpio name is PA19, ret = 0
- [ 2.625878] gpio name is PA18, ret = 0
- [ 2.626015] gpio name is PA7, ret = 0
- [ 2.626154] gpio name is PA8, ret = 0
- [ 2.626301] gpio name is PL2, ret = 0
- [ 2.626451] gpio name is PA9, ret = 0
- [ 2.626597] gpio name is PA10, ret = 0
- [ 2.626738] gpio name is PL4, ret = 0
- [ 2.626884] gpio name is PA17, ret = 0
- [ 2.627031] gpio name is PA21, ret = 0
- [ 2.627172] gpio name is PA20, ret = 0
- [ 2.627292] gpio name is PL10, ret = 0
- [ 2.627426] gpio name is PL3, ret = 0
- [ 2.627560] gpio_init finish with uesd 1!
- [ 2.627678] [DISP]disp_module_init
- [ 2.628050] cmdline,disp=
- [ 2.637676] [DISP] Fb_map_kernel_logo,line:930:Fb_map_kernel_logo failed!
- [ 2.654327] Console: switching to colour frame buffer device 160x45
- [ 2.672086] [DISP]disp_module_init finish
- [ 2.672426] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
- [ 2.672621] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
- [ 2.672810] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
- [ 2.673000] sw_uart_get_devinfo()1503 - uart3 has no uart_regulator.
- [ 2.673761] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 2.673947] sw_uart_pm()890 - uart0 clk is already enable
- [ 2.674115] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 2.770580] console [ttyS0] enabled
- [ 4.315192] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 4.452167] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
- [ 4.597571] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
- [ 4.607426] sunxi_cmatest_init enter
- [ 4.614082] sunxi_cmatest_init success
- [ 4.621067] UMP<2>: Inserting UMP device driver. Compiled: Dec 9 2015, time: 07:22:06
- [ 4.632995] UMP<2>: Using OS memory backend, allocation limit: 134217728
- [ 4.643452] UMP: UMP device driver loaded
- [ 4.651520] mali clk: 252 MHz
- [ 4.658003] mali clk: 252 MHz
- [ 4.665669] Mali: Mali device driver loaded
- [ 4.677618] loop: module loaded
- [ 4.684501] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
- [ 4.694939] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
- [ 4.705948] spi spi0: master is unqueued, this is deprecated
- [ 4.715873] tun: Universal TUN/TAP device driver, 1.6
- [ 4.725043] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 4.736897] PPP generic driver version 2.4.2
- [ 4.745584] PPP BSD Compression module registered
- [ 4.754636] PPP Deflate Compression module registered
- [ 4.766212] PPP MPPE Compression module registered
- [ 4.775541] NET: Registered protocol family 24
- [ 4.784539] PPTP driver version 0.8.5
- [ 4.793032] usbcore: registered new interface driver asix
- [ 4.803289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.834961] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.848398] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 4.862072] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 4.890047] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 4.902005] hub 1-0:1.0: USB hub found
- [ 4.910951] hub 1-0:1.0: 1 port detected
- [ 4.940456] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.954319] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
- [ 4.968222] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
- [ 4.990039] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
- [ 5.002016] hub 2-0:1.0: USB hub found
- [ 5.010973] hub 2-0:1.0: 1 port detected
- [ 5.040506] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 5.054392] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
- [ 5.068392] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000
- [ 5.100039] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
- [ 5.112230] hub 3-0:1.0: USB hub found
- [ 5.121446] hub 3-0:1.0: 1 port detected
- [ 5.131128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 5.162947] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 5.176449] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
- [ 5.189938] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 5.264534] hub 4-0:1.0: USB hub found
- [ 5.273755] hub 4-0:1.0: 1 port detected
- [ 5.303520] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 5.317202] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5
- [ 5.330746] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
- [ 5.404529] hub 5-0:1.0: USB hub found
- [ 5.413738] hub 5-0:1.0: 1 port detected
- [ 5.443503] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 5.457286] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 6
- [ 5.471009] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400
- [ 5.544554] hub 6-0:1.0: USB hub found
- [ 5.554011] hub 6-0:1.0: 1 port detected
- [ 5.563937] Initializing USB Mass Storage driver...
- [ 5.574734] usbcore: registered new interface driver usb-storage
- [ 5.586642] USB Mass Storage support registered.
- [ 5.597013] usbcore: registered new interface driver ums-alauda
- [ 5.608903] usbcore: registered new interface driver ums-cypress
- [ 5.620826] usbcore: registered new interface driver ums-datafab
- [ 5.632675] usbcore: registered new interface driver ums_eneub6250
- [ 5.644662] usbcore: registered new interface driver ums-freecom
- [ 5.656403] usbcore: registered new interface driver ums-isd200
- [ 5.668032] usbcore: registered new interface driver ums-jumpshot
- [ 5.679690] usbcore: registered new interface driver ums-karma
- [ 5.690901] usbcore: registered new interface driver ums-onetouch
- [ 5.702337] usbcore: registered new interface driver ums-realtek
- [ 5.713587] usbcore: registered new interface driver ums-sddr09
- [ 5.724697] usbcore: registered new interface driver ums-sddr55
- [ 5.735698] usbcore: registered new interface driver ums-usbat
- [ 5.746655] usbcore: registered new interface driver usbserial
- [ 5.757353] usbserial: USB Serial Driver core
- [ 5.766413] usbcore: registered new interface driver option
- [ 5.776831] USB Serial support registered for GSM modem (1-port)
- [ 5.788311] file system registered
- [ 5.798026] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 5.810081] android_usb gadget: Number of LUNs=3
- [ 5.819446] lun0: LUN: removable file: (no medium)
- [ 5.829097] lun1: LUN: removable file: (no medium)
- [ 5.838661] lun2: LUN: removable file: (no medium)
- [ 5.848555] android_usb gadget: android_usb ready
- [ 5.858024] uinput result 0 , vmouse_init
- [ 5.867416] mousedev: PS/2 mouse device common for all mice
- [ 5.877985] sunxikbd_init failed.
- [ 5.885785] ls_fetch_sysconfig_para: type err device_used = 0.
- [ 5.896535] =========script_get_err============
- [ 5.905617] ltr_init: ls_fetch_sysconfig_para err.
- [ 5.915502] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
- [ 5.927174] IR RC5(x) protocol handler initialized
- [ 5.936696] sunxi tsc version 0.1
- [ 5.944616] tscdev_init: tsc driver is disabled
- [ 5.953811] sunxi cedar version 0.1
- [ 5.961825] [cedar]: install start!!!
- [ 5.970104] [cedar]: install end!!!
- [ 5.977874] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
- [ 5.989026] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
- [ 6.000467] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
- [ 6.015968] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
- [ 6.026376] timeout_to_interv, line 167
- [ 6.034822] interv_to_timeout, line 189
- [ 6.043203] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
- [ 6.056971] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 6.070751] Bluetooth: HCI UART driver ver 2.2
- [ 6.080412] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
- [ 6.097035] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Dec 9 2015 at 07:22:42
- [ 6.112578] [mmc]: get mmc0's sdc_power is null!
- [ 6.121862] [mmc]: get mmc1's sdc_power is null!
- [ 6.131115] [mmc]: get mmc1's 2xmode ok, val = 1
- [ 6.140417] [mmc]: get mmc1's ddrmode ok, val = 1
- [ 6.149809] [mmc]: get mmc2's sdc_power is null!
- [ 6.159118] [mmc]: get mmc2's 2xmode ok, val = 1
- [ 6.168442] [mmc]: get mmc2's ddrmode ok, val = 1
- [ 6.177896] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
- [ 6.190372] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.205782] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.220322] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.221607] [mmc]: sdc0 power_supply is null
- [ 6.240037] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.260416] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.260849] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
- [ 6.261690] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
- [ 6.261720] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.264211] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.265630] *******************Try sdio*******************
- [ 6.266446] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 6.267279] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 6.268108] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 6.268939] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 6.268962] *******************Try sd *******************
- [ 6.269604] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.269713] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.272198] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.291512] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.292413] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 6.292488] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 6.292598] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 6.292675] mmc0: new high speed SDXC card at address 0001
- [ 6.293045] mmcblk0: mmc0:0001 00000 59.6 GiB
- [ 6.294136] mmcblk0: p1 p2
- [ 6.294797] *******************sd init ok*******************
- [ 6.294817] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.296351] [mmc]: sdc2 power_supply is null
- [ 6.310035] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.330840] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
- [ 6.331681] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
- [ 6.331711] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.334199] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.336109] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
- [ 6.336134] *******************Try sdio*******************
- [ 6.336949] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
- [ 6.337779] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
- [ 6.338609] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
- [ 6.339439] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
- [ 6.339463] *******************Try sd *******************
- [ 6.340279] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
- [ 6.341112] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
- [ 6.341944] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
- [ 6.342777] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
- [ 6.342800] *******************Try mmc*******************
- [ 6.342811] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.343236] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.343340] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.343443] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.345924] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.361212] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.373505] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 6.373632] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
- [ 6.373704] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
- [ 6.373822] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
- [ 6.373979] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
- [ 6.374053] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
- [ 6.374161] mmc1: new high speed DDR MMC card at address 0001
- [ 6.374560] mmcblk1: mmc1:0001 8WMB3R 7.28 GiB
- [ 6.374740] mmcblk1boot0: mmc1:0001 8WMB3R partition 1 4.00 MiB
- [ 6.374921] mmcblk1boot1: mmc1:0001 8WMB3R partition 2 4.00 MiB
- [ 6.375734] mmcblk1: p1
- [ 6.377167] mmcblk1boot1: unknown partition table
- [ 6.378319] mmcblk1boot0: unknown partition table
- [ 6.378526] *******************mmc init ok *******************
- [ 6.452862] sunxi_leds_fetch_sysconfig_para script_parser_fetch "leds_para" leds_used = -1070087648
- [ 6.452871] =========script_get_err============
- [ 6.454302] usbcore: registered new interface driver usbhid
- [ 6.454310] usbhid: USB HID core driver
- [ 6.455406] request gpio failed!
- [ 6.576525] asoc: sndcodec <-> sunxi-codec mapping ok
- [ 6.727865] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
- [ 6.868771] oprofile: using arm/armv7-ca7
- [ 7.006175] u32 classifier
- [ 7.099962] Actions configured
- [ 7.107053] Netfilter messages via NETLINK v0.30.
- [ 7.115606] nf_conntrack version 0.5.0 (15995 buckets, 63980 max)
- [ 7.126183] ctnetlink v0.93: registering with nfnetlink.
- [ 7.135475] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 7.146580] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 7.156658] xt_time: kernel timezone is -0000
- [ 7.165053] IPv4 over IPv4 tunneling driver
- [ 7.173578] gre: GRE over IPv4 demultiplexor driver
- [ 7.182549] ip_gre: GRE over IPv4 tunneling driver
- [ 7.192003] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.201578] arp_tables: (C) 2002 David S. Miller
- [ 7.210327] TCP: cubic registered
- [ 7.217574] Initializing XFRM netlink socket
- [ 7.226159] NET: Registered protocol family 10
- [ 7.235773] Mobile IPv6
- [ 7.242033] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.251841] IPv6 over IPv4 tunneling driver
- [ 7.261241] NET: Registered protocol family 17
- [ 7.269953] NET: Registered protocol family 15
- [ 7.278830] Bluetooth: RFCOMM TTY layer initialized
- [ 7.288110] Bluetooth: RFCOMM socket layer initialized
- [ 7.297588] Bluetooth: RFCOMM ver 1.11
- [ 7.305520] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 7.315281] Bluetooth: BNEP filters: protocol multicast
- [ 7.325001] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 7.335642] L2TP core driver, V2.0
- [ 7.343445] PPPoL2TP kernel driver, V2.0
- [ 7.351716] L2TP IP encapsulation support (L2TPv3)
- [ 7.361017] L2TP netlink interface
- [ 7.368684] L2TP ethernet pseudowire support (L2TPv3)
- [ 7.378548] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 7.391166] ThumbEE CPU extension supported.
- [ 7.399975] Registering SWP/SWPB emulation handler
- [ 7.410356] cmdline,disp=
- [ 7.417380] [HDMI] power vcc-hdmi-18
- [ 7.456112] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:33:28 UTC (2008)
- [ 7.469102] ths_fetch_sysconfig_para: type err device_used = 1.
- [ 7.481238] CPU Budget:Register notifier
- [ 7.489644] CPU Budget:register Success
- [ 7.497929] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 7.514783] [rf_pm]: failed to fetch wifi configuration!
- [ 7.524954] [rf_pm]: regulator on.
- [ 7.533144] [wifi_pm]: wifi gpio init is OK !!
- [ 7.542311] ALSA device list:
- [ 7.549755] #0: audiocodec
- [ 7.557068] #1: sndhdmi
- [ 7.567367] Freeing init memory: 3792K
- This is a simple textured cube demo from the lima driver and
- a memtester. Both combined in a single program. The mali400
- hardware is only used to stress RAM in the background. But
- this happens to significantly increase chances of exposing
- memory stability related problems.
- Kernel driver is version 14
- Detected 1 Mali-400 GP Cores.
- Detected 2 Mali-400 PP Cores.
- FB: 1280x720@32bpp at 0x70200000 (0x00708000)
- Using dual buffered direct rendering to FB.
- memtester version 4.3.0 (32-bit)
- Copyright (C) 2001-2012 Charles Cazabon.
- Licensed under the GNU General Public License version 2 (only).
- pagesize is 4096
- pagesizemask is 0xfffff000
- want 50MB (52428800 bytes)
- got 50MB (52428800 bytes), trying mlock ...[ 8.060157] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=4
- locked.
- Loop 1/2:
- Stuck Address : testing 1[ 8.480128] CPU Budget: Temperature: 60 Limit state:1 item[912000,4,-1,0 0]
- [ 8.480194] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- ok
- Random Value : ok
- Compare XOR : ok
- Compare SUB : ok
- Compare MUL : ok
- Compare DIV : ok
- Compare OR : ok
- Compare AND : ok
- Sequential Increment: ok
- Bit Flip : testing 228[ 76.980412] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- [ 76.994074] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- testing 230[ 77.480142] CPU Budget: Temperature: 75 Limit state:1 item[912000,4,-1,0 0]
- [ 77.495388] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- setting 238[ 79.480276] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- [ 79.494265] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- testing 243[ 80.980416] CPU Budget: Temperature: 75 Limit state:1 item[912000,4,-1,0 0]
- [ 80.995879] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- testing 249[ 82.480231] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- [ 82.494456] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- ok
- Block Sequential : testing 0[ 84.480163] CPU Budget: Temperature: 75 Limit state:1 item[912000,4,-1,0 0]
- setting 1[ 84.496062] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- testing 6[ 85.980172] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- [ 85.994409] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- setting 10[ 86.980668] CPU Budget: Temperature: 75 Limit state:1 item[912000,4,-1,0 0]
- [ 86.996875] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- setting 14[ 87.980239] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- [ 87.994818] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- testing 19[ 89.480183] CPU Budget: Temperature: 75 Limit state:1 item[912000,4,-1,0 0]
- [ 89.480244] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- setting 23[ 90.480223] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- [ 90.480297] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- setting 36[ 93.980190] CPU Budget: Temperature: 75 Limit state:1 item[912000,4,-1,0 0]
- [ 93.996521] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- setting 38[ 94.480215] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- [ 94.494991] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- setting 40[ 94.980599] CPU Budget: Temperature: 75 Limit state:1 item[912000,4,-1,0 0]
- [ 94.997079] CPU Budget:update CPU 0 cpufreq max to 912000 min to 648000
- testing 41[ 95.480190] CPU Budget: Temperature: 75 Limit state:2 item[720000,4,-1,0 0]
- setting 42[ 95.494711] CPU Budget:update CPU 0 cpufreq max to 720000 min to 648000
- ok
- Checkerboard : ok
- Bit Spread : ok
- Solid Bits : ok
- Walking Ones : ok
- Walking Zeroes : setting 26
- ok
- Loop 2/2:
- Stuck Address : testing 1[ 242.610196] INFO: task vsync proc 0:52 blocked for more than 120 seconds.
- [ 242.626267] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 242.626292] vsync proc 0 D c0657a34 0 52 2 0x00000000
- [ 242.626352] [<c0657a34>] (__schedule+0x5f0/0x74c) from [<c0657d30>] (schedule+0x90/0x94)
- setting 2[ 242.626385] [<c0657d30>] (schedule+0x90/0x94) from [<c0048a70>] (kthread+0x84/0xac)
- [ 242.626421] [<c0048a70>] (kthread+0x84/0xac) from [<c000f66c>] (kernel_thread_exit+0x0/0x8)
- [ 242.626444] INFO: task vsync proc 1:53 blocked for more than 120 seconds.
- [ 242.626457] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- [ 242.626471] vsync proc 1 D c0657a34 0 53 2 0x00000000
- [ 242.626504] [<c0657a34>] (__schedule+0x5f0/0x74c) from [<c0657d30>] (schedule+0x90/0x94)
- [ 242.626533] [<c0657d30>] (schedule+0x90/0x94) from [<c0048a70>] (kthread+0x84/0xac)
- [ 242.626562] [<c0048a70>] (kthread+0x84/0xac) from [<c000f66c>] (kernel_thread_exit+0x0/0x8)
- ok
- Random Value : ok
- Compare XOR : ok
- Compare SUB : ok
- Compare MUL : ok
- Compare DIV : ok
- Compare OR : ok
- Compare AND : ok
- Sequential Increment: ok
- Bit Flip : testing 136
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement