Sitecom wireless DMESG

xbian@xbian ~ $ dmesg
Booting Linux on physical CPU 0x0
Linux version 3.9.8+ (root@media) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 PREEMPT Tue Jul 2 17:38:12 CEST 2013
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: BCM2708
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 98304
free_area_init_node: node 0, pgdat c0412690, node_mem_map c0450000
  Normal zone: 768 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 98304 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708.boardrev=0x100000e bcm2708.serial=0x298dfab smsc95xx.macaddr=B8:27:EB:98:DF:AB sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=xbian-root-btrfs rootfsopts=subvol=root/@,noatime,compress=lzo,thread_pool=1,space_cache,autodefrag rootfstype=btrfs rootwait=10 smsc95xx.turbo_mode=N elevator=noop nohdparm splash logo.nologo quiet loglevel=0 noswap mod_scsi.scan=async
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
__ex_table already sorted, skipping sort
Memory: 384MB = 384MB total
Memory: 382316k/382316k available, 10900k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
    lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc03c9494   (3846 kB)
      .init : 0xc03ca000 - 0xc03e7364   ( 117 kB)
      .data : 0xc03e8000 - 0xc0412d20   ( 172 kB)
       .bss : 0xc0412d20 - 0xc044f23c   ( 242 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:330
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
Switching to timer-based delay loop
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc02e2160 - 0xc02e2198
devtmpfs: initialized
NET: Registered protocol family 16
DMA: preallocated 4096 KiB pool for atomic coherent allocations
bcm2708.uart_clock = 0
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
mailbox: Broadcom VideoCore Mailbox driver
bcm2708_vcio: mailbox at f200b880
bcm_power: Broadcom power driver
bcm_power_open() -> 0
bcm_power_request(0, 8)
bcm_mailbox_read -> 00000080, 0
bcm_power_request -> 0
Serial: AMBA PL011 UART driver
dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource stc
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 2956K
bcm2708_dma: DMA manager at f2007000
bcm2708_gpio: bcm2708_gpio_probe c03f4890
vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
audit: initializing netlink socket (disabled)
type=2000 audit(2.630:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 752
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered (default)
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 2472000 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 225944 bytes in 911000 nsec
BCM2708FB: allocated DMA memory 579d0000
BCM2708FB: allocated DMA channel 0 @ f2007000
Console: switching to colour frame buffer device 228x61
vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver cdc_ncm
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Core Release: 2.80a
Setting default values for core params
Finished setting default values for core params
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
Dedicated Tx FIFOs mode
dwc_otg: Microframe scheduler enabled
dwc_otg bcm2708_usb: DWC OTG Controller
dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
Init: Port Power? op_state=1
Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 3.9.8+ dwc_otg_hcd
usb usb1: SerialNumber: bcm2708_usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split fix enabled
Module dwc_common_port init
bcm2835-cpufreq: min=700000 max=840000 cur=700000
bcm2835-cpufreq: switching to governor performance
bcm2835-cpufreq: switching to governor performance
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: Enable low-latency mode
mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
registered taskstats version 1
Freeing init memory: 116K
mmc0: new high speed SDHC card at address 1234
mmcblk0: mmc0:1234 SA04G 3.63 GiB
 mmcblk0: p1 p2
Indeed it is in host mode hprt0 = 00021501
udevd[57]: starting version 175
usb 1-1: new high-speed USB device number 2 using dwc_otg
Indeed it is in host mode hprt0 = 00001101
usb 1-1: New USB device found, idVendor=0424, idProduct=9512
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 3 ports detected
usb 1-1.1: new high-speed USB device number 3 using dwc_otg
raid6: int32x1     29 MB/s
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
smsc95xx v1.0.4
raid6: int32x2     45 MB/s
smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:98:df:ab
raid6: int32x4     56 MB/s
raid6: int32x8     62 MB/s
raid6: using algorithm int32x8 (62 MB/s)
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
usb 1-1.3: new high-speed USB device number 4 using dwc_otg
   arm4regs  :  1171.600 MB/sec
usb 1-1.3: New USB device found, idVendor=0df6, idProduct=006c
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: RTL8191S WLAN Adapter
usb 1-1.3: Manufacturer: Manufacturer Realtek
usb 1-1.3: SerialNumber: 00e04c000001
   8regs     :   564.000 MB/sec
   32regs    :   529.600 MB/sec
xor: using function: arm4regs (1171.600 MB/sec)
Btrfs loaded
device label xbian-root-btrfs devid 1 transid 267 /dev/mmcblk0p2
device label xbian-root-btrfs devid 1 transid 267 /dev/mmcblk0p2
btrfs: use lzo compression
btrfs: enabling auto defrag
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
init: frandom pre-start process (235) terminated with status 1
init: mounted-proc main process (242) terminated with status 1
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device label xbian-root-btrfs devid 1 transid 267 /dev/mmcblk0p2
udevd[312]: starting version 175
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 2 device(s) ...
Adding 127996k swap on /dev/zram0.  Priority:20 extents:1 across:127996k SS
loop: module loaded
Adding 122876k swap on /dev/loop0.  Priority:0 extents:1 across:122876k
device label xbian-root-btrfs devid 1 transid 267 /dev/mmcblk0p2
smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
init: failsafe main process (517) killed by TERM signal
init: xbmc-norun main process (526) killed by TERM signal
smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
init: Unable to connect to the system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory