API tools faq
paste
Advertisement
Guest User

A64 ML Test

a guest
Jul 31st, 2016
175
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.53 KB | None | 0 0
raw download clone embed print report
  1. HELLO! BOOT0 is starting!
  2. boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
  3.  
  4. boot0 version : 4.0.0
  5. set pll start
  6. set pll end
  7. rtc[0] value = 0x00000000
  8. rtc[1] value = 0x00000000
  9. rtc[2] value = 0x00000000
  10. rtc[3] value = 0x00000000
  11. rtc[4] value = 0x00000000
  12. rtc[5] value = 0x00000000
  13. DRAM driver version: V1.1
  14. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  15. PMU: AXP81X
  16. ddr voltage = 1500 mv
  17. DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  18. DRAM clk = 672 MHz
  19. DRAM zq value: 003b3bbb
  20. DRAM single rank full DQ OK
  21. DRAM size = 2048 MB
  22. DRAM init ok
  23. dram size =2048
  24. card boot number = 0, boot0 copy = 0
  25. card no is 0
  26. sdcard 0 line count 4
  27. [mmc]: mmc driver ver 2015-05-08 20:06
  28. [mmc]: sdc0 spd mode error, 2
  29. [mmc]: Wrong media type 0x00000000
  30. [mmc]: ***Try SD card 0***
  31. [mmc]: HSSDR52/SDR25 4 bit
  32. [mmc]: 50000000 Hz
  33. [mmc]: 15343 MB
  34. [mmc]: ***SD/MMC 0 init OK!!!***
  35. sdcard 0 init ok
  36. The size of uboot is 00064000.
  37. sum=0540847d
  38. src_sum=0540847d
  39. Succeed in loading uboot from sdmmc flash.
  40. boot0: start load other image
  41. boot0: Loading BL3-1
  42. Loading file 0 at address 0x40000000,size 0x00000200 success
  43. boot0: Loading scp
  44. Loading file 2 at address 0x00040000,size 0x0000b200 success
  45. set arisc reset to de-assert state
  46. Ready to disable icache.
  47. Jump to secend Boot.
  48. NOTICE: BL3-1: Running in SRAM A2 (@0x44000)
  49. NOTICE: Configuring SPC Controller
  50. NOTICE: BL3-1: v1.0(debug):467f187
  51. NOTICE: BL3-1: Built : 01:23:55, Jun 1 2016
  52. NOTICE: Configuring AXP PMIC
  53. NOTICE: PMIC: already configured for RSB
  54. NOTICE: PMIC: setup successful
  55.  
  56.  
  57. U-Boot 2016.05-00558-ga090bfa (Jun 01 2016 - 01:16:54 +0100) Allwinner Technology
  58.  
  59. CPU: Allwinner A64 (SUN50I)
  60. Model: Pine64+
  61. DRAM: 2 GiB
  62. MMC: SUNXI SD/MMC: 0
  63. *** Warning - bad CRC, using default environment
  64.  
  65. In: serial
  66. Out: serial
  67. Err: serial
  68. Net: No ethernet found.
  69. starting USB...
  70. No controllers found
  71. Hit any key to stop autoboot: 0
  72. switch to partitions #0, OK
  73. mmc0 is current device
  74. Scanning mmc 0:1...
  75. Found U-Boot script /boot.scr.uimg
  76. reading /boot.scr.uimg
  77. 282 bytes read in 17 ms (15.6 KiB/s)
  78. ## Executing script at 4fc00000
  79. reading Image
  80. 14593024 bytes read in 962 ms (14.5 MiB/s)
  81. reading sun50i-a64-pine64-plus.dtb
  82. 6871 bytes read in 29 ms (230.5 KiB/s)
  83. ## Flattened Device Tree blob at 4fa00000
  84. Booting using the fdt blob at 0x4fa00000
  85. Loading Device Tree to 0000000049ffb000, end 0000000049fffad6 ... OK
  86.  
  87. Starting kernel ...
  88.  
  89. [ 0.000000] Booting Linux on physical CPU 0x0
  90. [ 0.000000] Linux version 4.7.0-next-20160729-aosc+ (icenowy@icenowy-tpe531) (gcc version 4.9.3 (GCC) ) #26 SMP PREEMPT Sun Jul 31 6
  91. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  92. [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '')
  93. [ 0.000000] bootconsole [uart0] enabled
  94. [ 0.000000] efi: Getting EFI parameters from FDT:
  95. [ 0.000000] efi: UEFI not found.
  96. [ 0.000000] cma: Reserved 16 MiB at 0x00000000bf000000
  97. [ 0.000000] psci: probing for conduit method from DT.
  98. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  99. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  100. [ 0.000000] psci: Trusted OS migration not required
  101. [ 0.000000] percpu: Embedded 21 pages/cpu @ffff80007ef88000 s48000 r8192 d29824 u86016
  102. [ 0.000000] Detected VIPT I-cache on CPU0
  103. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  104. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516096
  105. [ 0.000000] Kernel command line: console=ttyS0,115200n8 ro root=/dev/mmcblk0p2 rootwait earlycon=uart,mmio32,0x01c28000
  106. [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  107. [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  108. [ 0.000000] log_buf_len min size: 16384 bytes
  109. [ 0.000000] log_buf_len: 32768 bytes
  110. [ 0.000000] early log buf free: 14680(89%)
  111. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  112. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  113. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  114. [ 0.000000] Memory: 2029792K/2097152K available (8444K kernel code, 747K rwdata, 4076K rodata, 960K init, 316K bss, 50976K reserved)
  115. [ 0.000000] Virtual kernel memory layout:
  116. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  117. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  118. [ 0.000000] .text : 0xffff000008080000 - 0xffff0000088c0000 ( 8448 KB)
  119. [ 0.000000] .rodata : 0xffff0000088c0000 - 0xffff000008cc0000 ( 4096 KB)
  120. [ 0.000000] .init : 0xffff000008cc0000 - 0xffff000008db0000 ( 960 KB)
  121. [ 0.000000] .data : 0xffff000008db0000 - 0xffff000008e6ac00 ( 747 KB)
  122. [ 0.000000] .bss : 0xffff000008e6ac00 - 0xffff000008eb9f58 ( 317 KB)
  123. [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
  124. [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  125. [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  126. [ 0.000000] 0xffff7e0000000000 - 0xffff7e0002000000 ( 32 MB actual)
  127. [ 0.000000] memory : 0xffff800000000000 - 0xffff800080000000 ( 2048 MB)
  128. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  129. [ 0.000000] Preemptible hierarchical RCU implementation.
  130. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  131. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  132. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  133. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  134. [ 0.000000] GIC: Using split EOI/Deactivate mode
  135. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  136. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  137. [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  138. [ 0.009035] Console: colour dummy device 80x25
  139. [ 0.013870] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  140. [ 0.024946] pid_max: default: 32768 minimum: 301
  141. [ 0.030057] Security Framework initialized
  142. [ 0.034564] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  143. [ 0.041800] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  144. [ 0.050976] ASID allocator initialised with 65536 entries
  145. [ 0.081502] EFI services will not be available.
  146. [ 0.111757] Detected VIPT I-cache on CPU1
  147. [ 0.111841] CPU1: Booted secondary processor [410fd034]
  148. [ 0.127184] Detected VIPT I-cache on CPU2
  149. [ 0.127238] CPU2: Booted secondary processor [410fd034]
  150. [ 0.143220] Detected VIPT I-cache on CPU3
  151. [ 0.143273] CPU3: Booted secondary processor [410fd034]
  152. [ 0.143384] Brought up 4 CPUs
  153. [ 0.176482] SMP: Total of 4 processors activated.
  154. [ 0.181563] CPU features: detected feature: 32-bit EL0 Support
  155. [ 0.187871] CPU: All CPU(s) started at EL2
  156. [ 0.192319] alternatives: patching kernel code
  157. [ 0.198857] devtmpfs: initialized
  158. [ 0.206592] DMI not present or invalid.
  159. [ 0.211083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  160. [ 0.222641] xor: measuring software checksum speed
  161. [ 0.267924] 8regs : 808.000 MB/sec
  162. [ 0.312535] 8regs_prefetch: 738.000 MB/sec
  163. [ 0.357518] 32regs : 895.000 MB/sec
  164. [ 0.402127] 32regs_prefetch: 836.000 MB/sec
  165. [ 0.407111] xor: using function: 32regs (895.000 MB/sec)
  166. [ 0.412865] pinctrl core: initialized pinctrl subsystem
  167. [ 0.420319] NET: Registered protocol family 16
  168. [ 0.445241] cpuidle: using governor menu
  169. [ 0.449864] vdso: 2 pages (1 code @ ffff0000088c6000, 1 data @ ffff000008db4000)
  170. [ 0.457878] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  171. [ 0.466620] DMA: preallocated 256 KiB pool for atomic allocations
  172. [ 0.473643] Serial: AMBA PL011 UART driver
  173. [ 0.519016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  174. [ 0.594576] raid6: int64x1 gen() 148 MB/s
  175. [ 0.666744] raid6: int64x1 xor() 151 MB/s
  176. [ 0.738780] raid6: int64x2 gen() 223 MB/s
  177. [ 0.810972] raid6: int64x2 xor() 203 MB/s
  178. [ 0.883094] raid6: int64x4 gen() 333 MB/s
  179. [ 0.955268] raid6: int64x4 xor() 249 MB/s
  180. [ 1.027395] raid6: int64x8 gen() 351 MB/s
  181. [ 1.099580] raid6: int64x8 xor() 245 MB/s
  182. [ 1.171883] raid6: neonx1 gen() 223 MB/s
  183. [ 1.243773] raid6: neonx1 xor() 219 MB/s
  184. [ 1.315943] raid6: neonx2 gen() 361 MB/s
  185. [ 1.388074] raid6: neonx2 xor() 323 MB/s
  186. [ 1.460181] raid6: neonx4 gen() 481 MB/s
  187. [ 1.532369] raid6: neonx4 xor() 372 MB/s
  188. [ 1.604570] raid6: neonx8 gen() 490 MB/s
  189. [ 1.676668] raid6: neonx8 xor() 375 MB/s
  190. [ 1.681286] raid6: using algorithm neonx8 gen() 490 MB/s
  191. [ 1.687020] raid6: .... xor() 375 MB/s, rmw enabled
  192. [ 1.692275] raid6: using intx1 recovery algorithm
  193. [ 1.697725] ACPI: Interpreter disabled.
  194. [ 1.703239] vgaarb: loaded
  195. [ 1.706683] SCSI subsystem initialized
  196. [ 1.711645] usbcore: registered new interface driver usbfs
  197. [ 1.717704] usbcore: registered new interface driver hub
  198. [ 1.723587] usbcore: registered new device driver usb
  199. [ 1.729759] pps_core: LinuxPPS API ver. 1 registered
  200. [ 1.735116] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  201. [ 1.745028] PTP clock support registered
  202. [ 1.749573] dmi: Firmware registration failed.
  203. [ 1.754903] Advanced Linux Sound Architecture Driver Initialized.
  204. [ 1.762945] clocksource: Switched to clocksource arch_sys_counter
  205. [ 1.769723] VFS: Disk quotas dquot_6.6.0
  206. [ 1.774055] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  207. [ 1.782049] pnp: PnP ACPI: disabled
  208. [ 1.801182] NET: Registered protocol family 2
  209. [ 1.806856] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  210. [ 1.815089] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  211. [ 1.823126] TCP: Hash tables configured (established 16384 bind 16384)
  212. [ 1.830339] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  213. [ 1.837038] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  214. [ 1.844365] NET: Registered protocol family 1
  215. [ 1.849723] RPC: Registered named UNIX socket transport module.
  216. [ 1.856150] RPC: Registered udp transport module.
  217. [ 1.861252] RPC: Registered tcp transport module.
  218. [ 1.866335] RPC: Registered tcp NFSv4.1 backchannel transport module.
  219. [ 1.874349] kvm [1]: IDMAP page: 408b6000
  220. [ 1.878701] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  221. [ 1.886055] kvm [1]: 8-bit VMID
  222. [ 1.889459] kvm [1]: Hyp mode initialized successfully
  223. [ 1.895104] kvm [1]: vgic-v2@1c84000
  224. [ 1.899156] kvm [1]: vgic interrupt IRQ1
  225. [ 1.903548] kvm [1]: virtual timer IRQ4
  226. [ 1.912473] futex hash table entries: 1024 (order: 5, 131072 bytes)
  227. [ 1.919425] audit: initializing netlink subsys (disabled)
  228. [ 1.925349] audit: type=2000 audit(1.844:1): initialized
  229. [ 1.931825] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  230. [ 1.960729] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  231. [ 1.968754] NFS: Registering the id_resolver key type
  232. [ 1.974747] Key type id_resolver registered
  233. [ 1.979759] Key type id_legacy registered
  234. [ 1.984528] fuse init (API version 7.25)
  235. [ 1.989765] 9p: Installing v9fs 9p2000 file system support
  236. [ 2.000471] io scheduler noop registered
  237. [ 2.005102] io scheduler cfq registered (default)
  238. [ 2.012451] libphy: mdio_driver_register: phy-bcm-ns2-pci
  239. [ 2.021667] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  240. [ 2.033384] xenfs: not registering filesystem on non-xen platform
  241. [ 2.046762] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  242. [ 2.056428] console [ttyS0] disabled
  243. [ 2.080701] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 12, base_baud = 1500000) is a U6_16550A
  244. [ 2.091100] console [ttyS0] enabled
  245. [ 2.091100] console [ttyS0] enabled
  246. [ 2.098362] bootconsole [uart0] disabled
  247. [ 2.098362] bootconsole [uart0] disabled
  248. [ 2.107643] SuperH (H)SCI(F) driver initialized
  249. [ 2.112847] msm_serial: driver initialized
  250. [ 2.117645] Unable to detect cache hierarchy from DT for CPU 0
  251. [ 2.133115] loop: module loaded
  252. [ 2.139539] libphy: Fixed MDIO Bus: probed
  253. [ 2.144698] tun: Universal TUN/TAP device driver, 1.6
  254. [ 2.149782] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  255. [ 2.156694] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  256. [ 2.162554] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  257. [ 2.168616] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  258. [ 2.175592] igb: Copyright (c) 2007-2014 Intel Corporation.
  259. [ 2.181299] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
  260. [ 2.189143] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  261. [ 2.195193] sky2: driver version 1.30
  262. [ 2.199683] VFIO - User Level meta-driver version: 0.3
  263. [ 2.206464] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  264. [ 2.213022] ehci-pci: EHCI PCI platform driver
  265. [ 2.217582] ehci-platform: EHCI generic platform driver
  266. [ 2.223202] ehci-platform 1c1b000.usb: EHCI Host Controller
  267. [ 2.228829] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
  268. [ 2.237168] ehci-platform 1c1b000.usb: irq 8, io mem 0x01c1b000
  269. [ 2.258990] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
  270. [ 2.266289] hub 1-0:1.0: USB hub found
  271. [ 2.270109] hub 1-0:1.0: 1 port detected
  272. [ 2.274678] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  273. [ 2.280410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  274. [ 2.286640] ohci-pci: OHCI PCI platform driver
  275. [ 2.291218] ohci-platform: OHCI generic platform driver
  276. [ 2.296734] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
  277. [ 2.303396] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 2
  278. [ 2.311415] ohci-platform 1c1b400.usb: irq 7, io mem 0x01c1b400
  279. [ 2.380246] hub 2-0:1.0: USB hub found
  280. [ 2.384066] hub 2-0:1.0: 1 port detected
  281. [ 2.388889] usbcore: registered new interface driver usb-storage
  282. [ 2.395034] usbcore: registered new interface driver ums-realtek
  283. [ 2.402572] mousedev: PS/2 mouse device common for all mice
  284. [ 2.409964] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  285. [ 2.416805] sun6i-rtc 1f00000.rtc: RTC enabled
  286. [ 2.421468] i2c /dev entries driver
  287. [ 2.427964] sdhci: Secure Digital Host Controller Interface driver
  288. [ 2.434174] sdhci: Copyright(c) Pierre Ossman
  289. [ 2.438611] Synopsys Designware Multimedia Card Interface Driver
  290. [ 2.446313] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  291. [ 2.491005] sunxi-mmc 1c0f000.mmc: base:0xffff000008066000 irq:6
  292. [ 2.497244] sdhci-pltfm: SDHCI platform and OF driver helper
  293. [ 2.507082] ledtrig-cpu: registered to indicate activity on CPUs
  294. [ 2.514683] usbcore: registered new interface driver usbhid
  295. [ 2.520319] usbhid: USB HID core driver
  296. [ 2.527844] NET: Registered protocol family 17
  297. [ 2.532525] 9pnet: Installing 9P2000 support
  298. [ 2.538029] Key type dns_resolver registered
  299. [ 2.545739] registered taskstats version 1
  300. [ 2.553024] Btrfs loaded, crc32c=crc32c-arm64-hw
  301. [ 2.559092] Key type encrypted registered
  302. [ 2.563611] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:05 UTC (5)
  303. [ 2.578597] ALSA device list:
  304. [ 2.580595] mmc0: host does not support reading read-only switch, assuming write-enable
  305. [ 2.584221] mmc0: new high speed SDHC card at address 59b4
  306. [ 2.585052] mmcblk0: mmc0:59b4 USD00 15.0 GiB
  307. [ 2.586520] mmcblk0: p1 p2
  308. [ 2.602431] No soundcards found.
  309. [ 2.607534] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  310. [ 2.624103] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  311. [ 2.632274] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  312. [ 2.642640] devtmpfs: mounted
  313. [ 2.646654] Freeing unused kernel memory: 960K (ffff800000cc0000 - ffff800000db0000)
  314. [ 3.370776] systemd[1]: System time before build time, advancing clock.
  315. [ 3.486336] random: systemd: uninitialized urandom read (16 bytes read)
  316. [ 3.520713] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSE)
  317. [ 3.539463] systemd[1]: Detected architecture arm64.
  318.  
  319. Welcome to AOSC OS (3.6.2, stable)!
  320.  
  321. [ 3.583140] systemd[1]: No hostname configured.
  322. [ 3.587744] systemd[1]: Set hostname to <localhost>.
  323. [ 3.642756] random: systemd: uninitialized urandom read (16 bytes read)
  324. [ 3.652746] random: systemd: uninitialized urandom read (16 bytes read)
  325. [ 3.666242] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
  326. [ 3.675063] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  327. [ 3.682754] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  328. [ 3.690234] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  329. [ 3.698142] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
  330. [ 3.852848] random: systemd: uninitialized urandom read (16 bytes read)
  331. [ 3.863178] random: systemd: uninitialized urandom read (16 bytes read)
  332. [ 4.122153] systemd[1]: Created slice System Slice.
  333. [ OK ] Created slice System Slice.
  334. [ 4.149079] systemd[1]: Listening on Process Core Dump Socket.
  335. [ OK ] Listening on Process Core Dump Socket.
  336. [ 4.167703] systemd[1]: Created slice system-serial\x2dgetty.slice.
  337. [ OK ] Created slice system-serial\x2dgetty.slice.
  338. [ 4.187642] systemd[1]: Listening on Journal Audit Socket.
  339. [ OK ] Listening on Journal Audit Socket.
  340. [ 4.203422] systemd[1]: Listening on Journal Socket.
  341. [ OK ] Listening on Journal Socket.
  342. [ 4.235569] systemd[1]: Starting File System Check on Root Device...
  343. Starting File System Check on Root Device...
  344. Mounting Temporary Directory...
  345. Mounting POSIX Message Queue File System...
  346. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  347. [ OK ] Listening on LVM2 metadata daemon socket.
  348. [ OK ] Reached target Encrypted Volumes.
  349. [ OK ] Listening on Network Service Netlink Socket.
  350. [ OK ] Listening on udev Kernel Socket.
  351. Starting Setup Virtual Console...
  352. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  353. [ OK ] Listening on Device-mapper event daemon FIFOs.
  354. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  355. [ OK ] Reached target Paths.
  356. [ OK ] Listening on udev Control Socket.
  357. Starting Load Kernel Modules...
  358. [ OK ] Listening on Journal Socket (/dev/log).
  359. Starting Journal Service...
  360. [ OK ] Reached target Swap.
  361. Starting Create list of required st... nodes for the current kernel...
  362. [ OK ] Reached target Remote File Systems.
  363. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  364. Mounting Huge Pages File System...
  365. Mounting Debug File System...
  366. [ OK ] Created slice system-getty.slice.
  367. [ OK ] Created slice User and Session Slice.
  368. [ OK ] Reached target Slices.
  369. [ OK ] Mounted POSIX Message Queue File System.
  370. [ OK ] Mounted Temporary Directory.
  371. [ OK ] Started Setup Virtual Console.
  372. [ OK ] Mounted Debug File System.
  373. [ OK ] Mounted Huge Pages File System.
  374. [[ 4.489628] random: fast init done
  375. FAILED] Failed to start Load Kernel Modules.
  376. See 'systemctl status systemd-modules-load.service' for details.
  377. Mounting Configuration File System...
  378. Mounting FUSE Control File System...
  379. Starting Apply Kernel Variables...
  380. [ OK ] Mounted Configuration File System.
  381. [ OK ] Mounted FUSE Control File System.
  382. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  383. [ OK ] Started Apply Kernel Variables.
  384. [ OK ] Started Journal Service.e...
  385. [ OK ] Started File System Check on Root Device.
  386. Starting Remount Root and Kernel File Systems...
  387. [ 11.024235] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  388. [ OK ] Started Remount Root and Kernel File Systems.
  389. Starting Load/Save Random Seed...
  390. Starting Flush Journal to Persistent Storage...
  391. Starting udev Coldplug all Devices...
  392. Starting Create Static Device Nodes in /dev...
  393. [ OK ] Started Load/Save Random Seed.
  394. [ 11.189919] systemd-journald[1067]: Received request to flush runtime journal from PID 1
  395. [ OK ] Started Create Static Device Nodes in /dev.
  396. Starting udev Kernel Device Manager...
  397. [ OK ] Reached target Local File Systems (Pre).
  398. [ OK ] Reached target Local File Systems.
  399. [ OK ] Started udev Coldplug all Devices.
  400. [ OK ] Started udev Kernel Device Manager.
  401. [ 12.401451] random: crng init done
  402. [ OK ] Found device /dev/ttyS0.
  403. [ OK ] Started Flush Journal to Persistent Storage.
  404. Starting Create Volatile Files and Directories...
  405. [ OK ] Started Create Volatile Files and Directories.
  406. Starting Network Time Synchronization...
  407. Starting Update UTMP about System Boot/Shutdown...
  408. [ OK ] Started Update UTMP about System Boot/Shutdown.
  409. [ OK ] Started Network Time Synchronization.
  410. [ OK ] Reached target System Time Synchronized.
  411. [ OK ] Reached target System Initialization.
  412. [ OK ] Started Daily verification of password and group files.
  413. [ OK ] Listening on D-Bus System Message Bus Socket.
  414. [ OK ] Reached target Sockets.
  415. [ OK ] Started Daily Cleanup of Temporary Directories.
  416. [ OK ] Reached target Timers.
  417. [ OK ] Reached target Basic System.
  418. Starting Permit User Sessions...
  419. Starting SSH Key Generation...
  420. [ OK ] Started D-Bus System Message Bus.
  421. Starting Network Service...
  422. Starting Network Manager...
  423. Starting Login Service...
  424. [ OK ] Started Permit User Sessions.
  425. [ OK ] Started SSH Key Generation.
  426. [ OK ] Started Serial Getty on ttyS0.
  427. [ OK ] Started Getty on tty1.
  428. [ OK ] Reached target Login Prompts.
  429. [ OK ] Started Login Service.
  430. [ OK ] Started Network Service.
  431. [ OK ] Started Network Manager.
  432. Starting Network Manager Script Dispatcher Service...
  433. [ OK ] Reached target Network.
  434. [ OK ] Started OpenSSH Daemon.
  435. Starting Network Name Resolution...
  436. [ OK ] Started Network Name Resolution.
  437. [ OK ] Reached target Multi-User System.
  438. [ OK ] Reached target Graphical Interface.
  439. [ OK ] Started Network Manager Script Dispatcher Service.
  440.  
  441. localhost - AOSC OS 3.6.2 / Kernel 4.7.0-next-20160729-aosc+ (ttyS0)
  442. localhost login: root
  443. Password:
  444. [ 25.912559] audit: type=1006 audit(1469102813.712:2): pid=1724 uid=0 old-auid=4294967295 auid=0 tty=ttyS0 old-ses=4294967295 ses=1 1
  445. [ 26.032966] audit: type=1006 audit(1469102813.832:3): pid=1759 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=21
  446. root [ ~ ] # dd if=/dev/mmcblk0 of=/dev/null bs=1M count=32
  447. 32+0 records in
  448. 32+0 records out
  449. 33554432 bytes (34 MB, 32 MiB) copied, 2.82981 s, 11.9 MB/s
  450. root [ ~ ] # [ 54.210999] usb 1-1: new high-speed USB device number 2 using ehci-platform
  451. [ 54.379941] usb-storage 1-1:1.0: USB Mass Storage device detected
  452. [ 54.387273] scsi host0: usb-storage 1-1:1.0
  453. [ 54.391802] scsi host0: runtime PM trying to activate child device host0 but parent (1-1:1.0) is not active
  454. [ 55.405739] scsi 0:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 4
  455. [ 55.421997] sd 0:0:0:0: [sda] Attached SCSI removable disk
  456. [ 58.923754] usb 1-1: USB disconnect, device number 2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!