Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- @@@@@@@@@@@@@@@@@@@@@@@@@ 1ere commande
- login as: root
- root@192.168.1.45's password:
- # dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.1.19-v7 (root@32aef1eef649) (gcc version 4.9.3 (Buildroot 2016.02-git-g2db76d4-dirty) ) #1 SMP Mon Oct 31 20:09:55 UTC 2016
- [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
- [ 0.000000] cma: Reserved 8 MiB at 0x1e400000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 126976
- [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map 9dfa4000
- [ 0.000000] Normal zone: 1116 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
- [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
- [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @9efb1000 s20416 r8192 d20544 u49152
- [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125860
- [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2709.boardrev=0xa02082 bcm2709.serial=0x5b679481 smsc95xx.macaddr=B8:27:EB:67:94:81 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap ro
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 485052K/507904K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 14660K reserved, 8192K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB)
- [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB)
- [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
- [ 0.000000] .text : 0x80008000 - 0x807945dc (7730 kB)
- [ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
- [ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
- [ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:608
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000026] Switching to timer-based delay loop, resolution 52ns
- [ 0.000250] Console: colour dummy device 80x30
- [ 0.000450] console [tty3] enabled
- [ 0.000482] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000502] pid_max: default: 32768 minimum: 301
- [ 0.000799] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000813] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.001766] Initializing cgroup subsys blkio
- [ 0.001791] Initializing cgroup subsys memory
- [ 0.001816] Initializing cgroup subsys devices
- [ 0.001835] Initializing cgroup subsys freezer
- [ 0.001861] Initializing cgroup subsys net_cls
- [ 0.001910] CPU: Testing write buffer coherency: ok
- [ 0.001971] ftrace: allocating 20313 entries in 60 pages
- [ 0.048371] CPU0: update cpu_capacity 1024
- [ 0.048400] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.048413] [bcm2709_smp_prepare_cpus] enter
- [ 0.048543] Setting up static identity map for 0x8240 - 0x8274
- [ 0.050298] [bcm2709_boot_secondary] cpu:1 started (0) 18
- [ 0.050495] [bcm2709_secondary_init] enter cpu:1
- [ 0.050540] CPU1: update cpu_capacity 1024
- [ 0.050546] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.050932] [bcm2709_boot_secondary] cpu:2 started (0) 16
- [ 0.051098] [bcm2709_secondary_init] enter cpu:2
- [ 0.051119] CPU2: update cpu_capacity 1024
- [ 0.051126] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.051487] [bcm2709_boot_secondary] cpu:3 started (0) 18
- [ 0.051617] [bcm2709_secondary_init] enter cpu:3
- [ 0.051638] CPU3: update cpu_capacity 1024
- [ 0.051644] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.051707] Brought up 4 CPUs
- [ 0.051730] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.051738] CPU: All CPU(s) started in HYP mode.
- [ 0.051745] CPU: Virtualization extensions available.
- [ 0.052425] devtmpfs: initialized
- [ 0.071306] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
- [ 0.071537] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.072339] pinctrl core: initialized pinctrl subsystem
- [ 0.072870] NET: Registered protocol family 16
- [ 0.078127] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.079237] bcm2709.uart_clock = 48000000
- [ 0.083145] bcm2709: Mini UART enabled
- [ 0.083638] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.083649] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.083805] Serial: AMBA PL011 UART driver
- [ 0.083850] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
- [ 0.084009] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.149122] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
- [ 0.149155] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
- [ 0.149709] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
- [ 0.149722] bcm2708-dmaengine 3f007000.dma: dma_debug:0
- [ 0.150290] SCSI subsystem initialized
- [ 0.150473] usbcore: registered new interface driver usbfs
- [ 0.150558] usbcore: registered new interface driver hub
- [ 0.150656] usbcore: registered new device driver usb
- [ 0.151197] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-09 18:11
- [ 0.178413] Switched to clocksource arch_sys_counter
- [ 0.219561] FS-Cache: Loaded
- [ 0.219818] CacheFiles: Loaded
- [ 0.229151] NET: Registered protocol family 2
- [ 0.230095] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.230163] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.230263] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.230328] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.230358] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.230640] NET: Registered protocol family 1
- [ 0.230949] RPC: Registered named UNIX socket transport module.
- [ 0.230959] RPC: Registered udp transport module.
- [ 0.230967] RPC: Registered tcp transport module.
- [ 0.230976] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.232049] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
- [ 0.233101] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.246480] VFS: Disk quotas dquot_6.6.0
- [ 0.246795] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.248863] FS-Cache: Netfs 'nfs' registered for caching
- [ 0.249776] NFS: Registering the id_resolver key type
- [ 0.249823] Key type id_resolver registered
- [ 0.249832] Key type id_legacy registered
- [ 0.251867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.252005] io scheduler noop registered
- [ 0.252024] io scheduler deadline registered (default)
- [ 0.252294] io scheduler cfq registered
- [ 0.254539] BCM2708FB: allocated DMA memory de800000
- [ 0.254564] BCM2708FB: allocated DMA channel 0 @ f3007000
- [ 0.268716] Console: switching to colour frame buffer device 160x45
- [ 0.277192] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.278761] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 29, base_baud = 50000000) is a 16550
- [ 0.279675] vc-cma: Videocore CMA driver
- [ 0.279685] vc-cma: vc_cma_base = 0x00000000
- [ 0.279695] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 0.279703] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 0.279876] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
- [ 0.291365] brd: module loaded
- [ 0.298330] loop: module loaded
- [ 0.299211] vchiq: vchiq_init_state: slot_zero = 0x9e880000, is_master = 0
- [ 0.300719] Loading iSCSI transport class v2.0-870.
- [ 0.301365] usbcore: registered new interface driver smsc95xx
- [ 0.301412] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 0.501686] Core Release: 2.80a
- [ 0.501699] Setting default values for core params
- [ 0.501732] Finished setting default values for core params
- [ 0.702074] Using Buffer DMA mode
- [ 0.702085] Periodic Transfer Interrupt Enhancement - disabled
- [ 0.702093] Multiprocessor Interrupt Enhancement - disabled
- [ 0.702102] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 0.702116] Dedicated Tx FIFOs mode
- [ 0.702396] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9e814000 dma = 0xde814000 len=9024
- [ 0.702425] FIQ FSM acceleration enabled for :
- [ 0.702425] Non-periodic Split Transactions
- [ 0.702425] Periodic Split Transactions
- [ 0.702425] High-Speed Isochronous Endpoints
- [ 0.702444] dwc_otg: Microframe scheduler enabled
- [ 0.702489] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417640
- [ 0.702502] WARN::hcd_init_fiq:413: FIQ ASM at 0x804179b0 length 36
- [ 0.702516] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f89c000
- [ 0.702549] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 0.702585] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 0.702617] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
- [ 0.702668] Init: Port Power? op_state=1
- [ 0.702676] Init: Power Port (0)
- [ 0.702868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.702883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.702896] usb usb1: Product: DWC OTG Controller
- [ 0.702908] usb usb1: Manufacturer: Linux 4.1.19-v7 dwc_otg_hcd
- [ 0.702920] usb usb1: SerialNumber: 3f980000.usb
- [ 0.703576] hub 1-0:1.0: USB hub found
- [ 0.703620] hub 1-0:1.0: 1 port detected
- [ 0.703999] dwc_otg: FIQ enabled
- [ 0.704008] dwc_otg: NAK holdoff enabled
- [ 0.704016] dwc_otg: FIQ split-transaction FSM enabled
- [ 0.704047] Module dwc_common_port init
- [ 0.704305] usbcore: registered new interface driver usb-storage
- [ 0.704483] mousedev: PS/2 mouse device common for all mice
- [ 0.705155] bcm2835-cpufreq: min=600000 max=1200000
- [ 0.707196] sdhci: Secure Digital Host Controller Interface driver
- [ 0.707200] sdhci: Copyright(c) Pierre Ossman
- [ 0.707349] sdhost: log_buf @ 9e813000 (de813000)
- [ 0.778422] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 0.800546] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
- [ 0.800554] mmc-bcm2835 3f300000.mmc: DMA channel allocated
- [ 0.835368] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 0.837227] mmc0: new high speed SDXC card at address 0007
- [ 0.837446] mmcblk0: mmc0:0007 SD64G 58.2 GiB
- [ 0.838478] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 0.838672] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.838739] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.838847] usbcore: registered new interface driver usbhid
- [ 0.838852] usbhid: USB HID core driver
- [ 0.839068] Initializing XFRM netlink socket
- [ 0.839085] NET: Registered protocol family 17
- [ 0.839158] Key type dns_resolver registered
- [ 0.839458] Registering SWP/SWPB emulation handler
- [ 0.839830] registered taskstats version 1
- [ 0.839934] vc-sm: Videocore shared memory driver
- [ 0.839942] [vc_sm_connected_init]: start
- [ 0.840207] [vc_sm_connected_init]: end - returning 0
- [ 0.842632] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
- [ 0.844565] mmcblk0: p1 p2 < p5 p6 p7 p8 >
- [ 0.847860] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incompatibilities
- [ 0.850231] EXT4-fs (mmcblk0p7): couldn't mount as ext2 due to feature incompatibilities
- [ 0.859829] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
- [ 0.859852] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
- [ 0.865051] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 0.866549] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 0.867319] devtmpfs: mounted
- [ 0.867691] Freeing unused kernel memory: 444K (80795000 - 80804000)
- [ 0.868053] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 0.870744] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 0.898480] Indeed it is in host mode hprt0 = 00021501
- [ 0.968822] mmc1: new high speed SDIO card at address 0001
- [ 1.078477] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 1.078563] Indeed it is in host mode hprt0 = 00001101
- [ 1.278644] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 1.278659] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.279073] hub 1-1:1.0: USB hub found
- [ 1.279124] hub 1-1:1.0: 5 ports detected
- [ 1.296329] udevd[99]: starting version 3.1.5
- [ 1.322635] random: udevd urandom read with 48 bits of entropy available
- [ 1.558457] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 1.644528] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.658779] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 1.658803] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.661459] smsc95xx v1.0.4
- [ 1.708002] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
- [ 1.708653] usbcore: registered new interface driver brcmfmac
- [ 1.721099] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:67:94:81
- [ 1.793751] random: nonblocking pool is initialized
- [ 1.798645] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
- [ 1.863346] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
- [ 1.879757] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
- [ 1.907858] usb 1-1.4: New USB device found, idVendor=20bc, idProduct=5500
- [ 1.907897] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.907906] usb 1-1.4: Product: PC/PS3/Android
- [ 1.907913] usb 1-1.4: Manufacturer: ShanWan
- [ 2.365077] bcm2835-rng 3f104000.rng: hwrng registered
- [ 2.365331] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- [ 2.714601] EXT4-fs (mmcblk0p8): couldn't mount as ext3 due to feature incompatibilities
- [ 2.715090] EXT4-fs (mmcblk0p8): couldn't mount as ext2 due to feature incompatibilities
- [ 4.798437] cfg80211: Calling CRDA to update world regulatory domain
- [ 7.958437] cfg80211: Calling CRDA to update world regulatory domain
- [ 8.075127] EXT4-fs (mmcblk0p8): recovery complete
- [ 8.082998] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
- [ 9.853710] Bluetooth: Core ver 2.20
- [ 9.853765] NET: Registered protocol family 31
- [ 9.853770] Bluetooth: HCI device and connection manager initialized
- [ 9.853786] Bluetooth: HCI socket layer initialized
- [ 9.853795] Bluetooth: L2CAP socket layer initialized
- [ 9.853815] Bluetooth: SCO socket layer initialized
- [ 9.939953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 9.939965] Bluetooth: BNEP filters: protocol multicast
- [ 9.939979] Bluetooth: BNEP socket layer initialized
- [ 11.118434] cfg80211: Calling CRDA to update world regulatory domain
- [ 12.733970] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 12.733994] Bluetooth: HIDP socket layer initialized
- [ 14.278435] cfg80211: Calling CRDA to update world regulatory domain
- [ 15.199898] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 17.438490] cfg80211: Calling CRDA to update world regulatory domain
- [ 20.598472] cfg80211: Calling CRDA to update world regulatory domain
- [ 23.758445] cfg80211: Calling CRDA to update world regulatory domain
- [ 26.449088] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
- [ 26.449103] brcmfmac: brcmf_add_if: ignore IF event
- [ 26.455529] brcmfmac: power management disabled
- [ 26.918461] cfg80211: Calling CRDA to update world regulatory domain
- [ 28.793208] NET: Registered protocol family 10
- [ 28.795549] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 30.078521] cfg80211: Calling CRDA to update world regulatory domain
- [ 33.238456] cfg80211: Calling CRDA to update world regulatory domain
- [ 36.398445] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
- [ 3553.931550] usb 1-1.2: new low-speed USB device number 5 using dwc_otg
- [ 3554.037374] usb 1-1.2: New USB device found, idVendor=0079, idProduct=0006
- [ 3554.037385] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3554.037392] usb 1-1.2: Product: Generic USB Joystick
- [ 3554.037398] usb 1-1.2: Manufacturer: DragonRise Inc.
- [ 3554.047728] input: DragonRise Inc. Generic USB Joystick as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0079:0006.0003/input/input0
- [ 3554.047915] dragonrise 0003:0079:0006.0003: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-3f980000.usb-1.2/input0
- # login as: root
- root@192.168.1.45's password:
- Password:
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 4.1.19-v7 (root@32aef1eef649) (gcc version 4.9.3 (Buildroot 2016.02-git-g2db76d4-dirty) ) #1 SMP Mon Oct 31 20:09:55 UTC 2016
- [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
- [ 0.000000] cma: Reserved 8 MiB at 0x1e400000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 126976
- [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map 9dfa4000
- [ 0.000000] Normal zone: 1116 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
- [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
- [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @9efb1000 s20416 r8192 d20544 u49152
- [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125860
- [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2709.boardrev=0xa02082 bcm2709.serial=0x5b679481 smsc95xx.macaddr=B8:27:EB:67:94:81 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap ro
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 485052K/507904K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 14660K reserved, 8192K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB)
- [ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB)
- [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
- [ 0.000000] .text : 0x80008000 - 0x807945dc (7730 kB)
- [ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
- [ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
- [ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:608
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000026] Switching to timer-based delay loop, resolution 52ns
- [ 0.000250] Console: colour dummy device 80x30
- [ 0.000450] console [tty3] enabled
- [ 0.000482] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000502] pid_max: default: 32768 minimum: 301
- [ 0.000799] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000813] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.001766] Initializing cgroup subsys blkio
- [ 0.001791] Initializing cgroup subsys memory
- [ 0.001816] Initializing cgroup subsys devices
- [ 0.001835] Initializing cgroup subsys freezer
- [ 0.001861] Initializing cgrouLogin incorrect
- NicoBOX login: [ 0.279876] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
- # [ 0.291365] brd: module loaded
- -sh: [: missing `]'
- # [ 0.298330] loop: module loaded
- -sh: [: missing `]'
- # [ 0.299211] vchiq: vchiq_init_state: slot_zero = 0x9e880000, is_master = 0
- -sh: [: missing `]'
- # [ 0.300719] Loading iSCSI transport class v2.0-870.
- -sh: [: missing `]'
- # [ 0.301365] usbcore: registered new interface driver smsc95xx
- -sh: [: missing `]'
- # [ 0.301412] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- -sh: syntax error near unexpected token `('
- # [ 0.501686] Core Release: 2.80a
- -sh: [: missing `]'
- # [ 0.501699] Setting default values for core params
- -sh: [: missing `]'
- # [ 0.501732] Finished setting default values for core params
- -sh: [: missing `]'
- # [ 0.702074] Using Buffer DMA mode
- [ 0.702085] Periodic Transfer Interrupt Enhancement - disabled
- -sh: [: missing `]'
- # [ 0.702085] Periodic Transfer Interrupt Enhancement - disabled
- -sh: [: missing `]'
- # [ 0.702093] Multiprocessor Interrupt Enhancement - disabled
- -sh: [: missing `]'
- # [ 0.702102] OTG VER PARAM: 0, OTG VER FLAG: 0
- -sh: [: missing `]'
- # [ 0.702116] Dedicated Tx FIFOs mode
- -sh: [: missing `]'
- # [ 0.702396] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9e814000 dma = 0xde814000 len=9024
- [ 0.702868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- -sh: [: missing `]'
- [ 0.702883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- # [ 0.702425] FIQ FSM acceleration enabled for :
- [ 0.704305] usbcore: registered new interface driver usb-storage
- -sh: [: missing `]'
- # [ 0.702425] Non-periodic Split Transactions
- -sh: [: missing `]'
- # [ 0.702425] Periodic Split Transactions
- -sh: [: missing `]'
- # [ 0.702425] High-Speed Isochronous Endpoints
- -sh: [: missing `]'
- # [ 0.702444] dwc_otg: Microframe scheduler enabled
- -sh: [: missing `]'
- # [ 0.702489] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417640
- -sh: [: missing `]'
- # [ 0.702502] WARN::hcd_init_fiq:413: FIQ ASM at 0x804179b0 length 36
- -sh: [: missing `]'
- # [ 0.702516] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f89c000
- -sh: [: missing `]'
- # [ 0.702549] dwc_otg 3f980000.usb: DWC OTG Controller
- -sh: [: missing `]'
- [ 0.705155] bcm2835-cpufreq: min=600000 max=1200000
- # [ 0.702585] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- -sh: [: missing `]'
- [ 0.835368] mmc0: host does not support reading read-only switch, assuming write-enable
- # [ 0.702617] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
- [ 0.839085] NET: Registered protocol family 17
- -sh: [: missing `]'
- # [ 0.702668] Init: Port Power? op_state=1
- -sh: [: missing `]'
- # [ 0.702676] Init: Power Port (0)
- -sh: syntax error near unexpected token `('
- # [ 0.702868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- -sh: [: missing `]'
- # [ 0.702883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- -sh: [: missing `]'
- # [ 0.702896] usb usb1: Product: DWC OTG Controller
- -sh: [: missing `]'
- # [ 0.702908] usb usb1: Manufacturer: Linux 4.1.19-v7 dwc_otg_hcd
- [ 0.847860] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incompatibilities
- -sh: [: missing `]'
- # [ 0.702920] usb usb1: SerialNumber: 3f980000.usb
- -sh: [: missing `]'
- # [ 0.703576] hub 1-0:1.0: USB hub found
- -sh: [: missing `]'
- # [ 0.703620] hub 1-0:1.0: 1 port detected
- -sh: [: missing `]'
- # [ 0.703999] dwc_otg: FIQ enabled
- -sh: [: missing `]'
- # [ 0.704008] dwc_otg: NAK holdoff enabled
- -sh: [: missing `]'
- # [ 0.704016] dwc_otg: FIQ split-transaction FSM enabled
- -sh: [: missing `]'
- # [ 0.704047] Module dwc_common_port init
- -sh: [: missing `]'
- # [ 0.704305] usbcore: registered new interface driver usb-storage
- -sh: [: missing `]'
- # [ 0.704483] mousedev: PS/2 mouse device common for all mice
- -sh: [: missing `]'
- # [ 0.705155] bcm2835-cpufreq: min=600000 max=1200000
- -sh: [: missing `]'
- # [ 0.707196] sdhci: Secure Digital Host Controller Interface driver
- -sh: [: missing `]'
- # [ 0.707200] sdhci: Copyright(c) Pierre Ossman
- -sh: syntax error near unexpected token `('
- # [ 0.707349] sdhost: log_buf @ 9e813000 (de813000)
- -sh: syntax error near unexpected token `('
- # [ 0.778422] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- -sh: syntax error near unexpected token `('
- # [ 0.800546] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
- -sh: [: missing `]'
- # [ 0.800554] mmc-bcm2835 3f300000.mmc: DMA channel allocated
- -sh: [: missing `]'
- # [ 0.835368] mmc0: host does not support reading read-only switch, assuming write-enable
- -sh: [: missing `]'
- # [ 0.837227] mmc0: new high speed SDXC card at address 0007
- -sh: [: missing `]'
- # [ 0.837446] mmcblk0: mmc0:0007 SD64G 58.2 GiB
- -sh: [: missing `]'
- # [ 0.838478] sdhci-pltfm: SDHCI platform and OF driver helper
- -sh: [: missing `]'
- # [ 0.838672] ledtrig-cpu: registered to indicate activity on CPUs
- -sh: [: missing `]'
- [ 1.322635] random: udevd urandom read with 48 bits of entropy available
- # [ 0.838739] hidraw: raw HID events driver (C) Jiri Kosina
- -sh: syntax error near unexpected token `('
- # [ 0.838847] usbcore: registered new interface driver usbhid
- [ 1.907913] usb 1-1.4: Manufacturer: ShanWan
- [ 2.365077] bcm2835-rng 3f104000.rng: hwrng registered
- -sh: [: missing `]'
- # [ 0.838852] usbhid: USB HID core driver
- -sh: [: missing `]'
- # [ 0.839068] Initializing XFRM netlink socket
- -sh: [: missing `]'
- # [ 0.839085] NET: Registered protocol family 17
- -sh: [: missing `]'
- # [ 0.839158] Key type dns_resolver registered
- -sh: [: missing `]'
- # [ 0.839458] Registering SWP/SWPB emulation handler
- -sh: [: missing `]'
- # [ 0.839830] registered taskstats version 1
- -sh: [: missing `]'
- # [ 0.839934] vc-sm: Videocore shared memory driver
- -sh: [: missing `]'
- # [ 0.839942] [vc_sm_connected_init]: start
- [ 9.853710] Bluetooth: Core ver 2.20
- [ 9.853765] NET: Registered protocol family 31
- -sh: [: missing `]'
- # [ 0.840207] [vc_sm_connected_init]: end - returning 0
- -sh: [: missing `]'
- # [ 0.842632] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
- -sh: syntax error near unexpected token `('
- # [ 0.844565] mmcblk0: p1 p2 < p5 p6 p7 p8 >
- -sh: syntax error near unexpected token `newline'
- # [ 0.847860] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incompatibilities
- -sh: syntax error near unexpected token `('
- # [ 0.850231] EXT4-fs (mmcblk0p7): couldn't mount as ext2 due to feature incompatibilities
- -sh: syntax error near unexpected token `('
- # [ 0.859829] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
- -sh: syntax error near unexpected token `('
- # [ 0.859852] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
- -sh: syntax error near unexpected token `('
- # [ 0.865051] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- -sh: syntax error near unexpected token `('
- # [ 0.866549] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- -sh: syntax error near unexpected token `('
- # [ 0.867319] devtmpfs: mounted
- -sh: [: missing `]'
- # [ 0.867691] Freeing unused kernel memory: 444K (80795000 - 80804000)
- -sh: syntax error near unexpected token `('
- # [ 0.868053] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- -sh: syntax error near unexpected token `('
- # [ 0.870744] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- -sh: syntax error near unexpected token `('
- [ 28.795549] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- # [ 0.898480] Indeed it is in host mode hprt0 = 00021501
- -sh: [: missing `]'
- # [ 0.968822] mmc1: new high speed SDIO card at address 0001
- -sh: [: missing `]'
- [ 30.078521] cfg80211: Calling CRDA to update world regulatory domain
- # [ 1.078477] usb 1-1: new high-speed USB device number 2 using dwc_otg
- -sh: [: missing `]'
- # [ 1.078563] Indeed it is in host mode hprt0 = 00001101
- -sh: [: missing `]'
- # [ 1.278644] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- -sh: [: missing `]'
- # [ 1.278659] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- -sh: [: missing `]'
- # [ 1.279073] hub 1-1:1.0: USB hub found
- -sh: [: missing `]'
- # [ 1.279124] hub 1-1:1.0: 5 ports detected
- -sh: [: missing `]'
- # [ 1.296329] udevd[99]: starting version 3.1.5
- -sh: [: missing `]'
- # [ 1.322635] random: udevd urandom read with 48 bits of entropy available
- -sh: [: missing `]'
- # [ 1.558457] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- -sh: [: missing `]'
- # [ 1.644528] cfg80211: Calling CRDA to update world regulatory domain
- -sh: [: missing `]'
- # [ 1.658779] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- -sh: [: missing `]'
- # [ 1.658803] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- -sh: [: missing `]'
- # [ 1.661459] smsc95xx v1.0.4
- -sh: [: missing `]'
- # [ 1.708002] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
- -sh: [: missing `]'
- # [ 1.708653] usbcore: registered new interface driver brcmfmac
- -sh: [: missing `]'
- # [ 1.721099] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:67:94:81
- -sh: [: missing `]'
- # [ 1.793751] random: nonblocking pool is initialized
- -sh: [: missing `]'
- # [ 1.798645] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
- -sh: [: missing `]'
- # [ 1.863346] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
- -sh: syntax error near unexpected token `('
- # [ 1.879757] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
- -sh: [: missing `]'
- # [ 1.907858] usb 1-1.4: New USB device found, idVendor=20bc, idProduct=5500
- -sh: [: missing `]'
- # [ 1.907897] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- -sh: [: missing `]'
- # [ 1.907906] usb 1-1.4: Product: PC/PS3/Android
- -sh: [: missing `]'
- # [ 1.907913] usb 1-1.4: Manufacturer: ShanWan
- -sh: [: missing `]'
- # [ 2.365077] bcm2835-rng 3f104000.rng: hwrng registered
- -sh: [: missing `]'
- # [ 2.365331] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- -sh: [: missing `]'
- # [ 2.714601] EXT4-fs (mmcblk0p8): couldn't mount as ext3 due to feature incompatibilities
- -sh: syntax error near unexpected token `('
- # [ 2.715090] EXT4-fs (mmcblk0p8): couldn't mount as ext2 due to feature incompatibilities
- -sh: syntax error near unexpected token `('
- # [ 4.798437] cfg80211: Calling CRDA to update world regulatory domain
- -sh: [: missing `]'
- # [ 7.958437] cfg80211: Calling CRDA to update world regulatory domain
- -sh: [: missing `]'
- # [ 8.075127] EXT4-fs (mmcblk0p8): recovery complete
- -sh: syntax error near unexpected token `('
- # [ 8.082998] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
- -sh: syntax error near unexpected token `('
- # [ 9.853710] Bluetooth: Core ver 2.20
- -sh: [: missing `]'
- # [ 9.853765] NET: Registered protocol family 31
- -sh: [: missing `]'
- # [ 9.853770] Bluetooth: HCI device and connection manager initialized
- -sh: [: missing `]'
- # [ 9.853786] Bluetooth: HCI socket layer initialized
- -sh: [: missing `]'
- # [ 9.853795] Bluetooth: L2CAP socket layer initialized
- -sh: [: missing `]'
- # [ 9.853815] Bluetooth: SCO socket layer initialized
- -sh: [: missing `]'
- # [ 9.939953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- -sh: syntax error near unexpected token `('
- # [ 9.939965] Bluetooth: BNEP filters: protocol multicast
- -sh: [: missing `]'
- # [ 9.939979] Bluetooth: BNEP socket layer initialized
- -sh: [: missing `]'
- # [ 11.118434] cfg80211: Calling CRDA to update world regulatory domain
- -sh: [: missing `]'
- # [ 12.733970] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- -sh: syntax error near unexpected token `('
- # [ 12.733994] Bluetooth: HIDP socket layer initialized
- -sh: [: missing `]'
- # [ 14.278435] cfg80211: Calling CRDA to update world regulatory domain
- -sh: [: missing `]'
- # [ 15.199898] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- > [ 17.438490] cfg80211: Calling CRDA to update world regulatory domain
- > [ 20.598472] cfg80211: Calling CRDA to update world regulatory domain
- > [ 23.758445] cfg80211: Calling CRDA to update world regulatory domain
- > [ 26.449088] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
- > [ 26.449103] brcmfmac: brcmf_add_if: ignore IF event
- > [ 26.455529] brcmfmac: power management disabled
- > [ 26.918461] cfg80211: Calling CRDA to update world regulatory domain
- > [ 28.793208] NET: Registered protocol family 10
- > [ 28.795549] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- > [ 30.078521] cfg80211: Calling CRDA to update world regulatory domain
- > [ 33.238456] cfg80211: Calling CRDA to update world regulatory domain
- > [ 36.398445] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
- > [ 3553.931550] usb 1-1.2: new low-speed USB device number 5 using dwc_otg
- > [ 3554.037374] usb 1-1.2: New USB device found, idVendor=0079, idProduct=0006
- > [ 3554.037385] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- > [ 3554.037392] usb 1-1.2: Product: Generic USB Joystick
- > [ 3554.037398] usb 1-1.2: Manufacturer: DragonRise Inc.
- > [ 3554.047728] input: DragonRise Inc. Generic USB Joystick as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0079:0006.0003/input/input0
- > [ 3554.047915] dragonrise 0003:0079:0006.0003: input,hidraw0: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-3f980000.usb-1.2/input0
- > #
- >
- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 2eme commande
- # ls /dev/input/
- by-id by-path event0 js0 mice
- #
- @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 3eme commande et 4eme pas concluant? me demande des parametres de commande en plus ^^
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement