qualcomm Dragonboard 410c bootup at uart console

~# reboot
[  OK  ] Stopped target Bluetooth.
         PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
Stopping Authenticate and Authorize Users to Run Privileged Tasks...
[  OK  ] Stopped target Timers.         Stopping User Manager for UID 114...
[  OK  ] Stopped target Graphical Interface.
         Stopping Console Manager...
         Stopping RealtimeKit Scheduling Policy Service...
[  OK  ] Stopped target Multi-User System.
         Stopping Network Name Resolution...
         Stopping LSB: Tool to automatically...ubmit kernel crash signatures...
[  OK  ] Stopped target Login Prompts.
         Stopping Getty on tty1...
         Stopping Avahi mDNS/DNS-SD Stack...
         Stopping Login Service...
         Stopping Modem Manager...
         Stopping System Logging Service...
         Stopping Regular background program processing daemon...
[  OK  ] Stopped target Containers.
         Stopping LSB: set CPUFreq kernel parameters...
         Stopping Accounts Service...
         Stopping LSB: Set the CPU Frequency Scaling governor to "ondemand"...
         Stopping Light Display Manager...
         Stopping Serial Getty on ttyMSM0...
[  OK  ] Removed slice system-ifup.slice.
[  OK  ] Stopped target Sound Card.
         Stopping LSB: automatic crash report generation...
         Stopping Bluetooth service...
[   45.882385] Bluetooth: hci0 sending frame failed (-16)
[  OK  ] Stopped wcnss bluetooth.
         Stopping wcnss bluetooth...
         Starting Store Sound Card State...
[  OK  ] Stopped Setup Virtual Console.
         Stopping Setup Virtual Console...
         Stopping User Manager for UID 0...
[  OK  ] Stopped RealtimeKit Scheduling Policy Service.
[  OK  ] Stopped Modem Manager.
[  OK  ] Stopped Regular background program processing daemon.
[  OK  ] Stopped Accounts Service.
[  OK  ] Stopped Login Service.
[  OK  ] Stopped System Logging Service.
[  OK  ] Stopped Console Manager.
[  OK  ] Stopped Avahi mDNS/DNS-SD Stack.
[  OK  ] Stopped Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Stopped Light Display Manager.
[  OK  ] Stopped Network Name Resolution.
[  OK  ] Stopped Serial Getty on ttyMSM0.
[  OK  ] Stopped Getty on tty1.
[  OK  ] Stopped User Manager for UID 0.
[  OK  ] Stopped User Manager for UID 114.
[  OK  ] Stopped Bluetooth service.
[  OK  ] Stopped LSB: Tool to automatically ... submit kernel crash signatures.
[  OK  ] Stopped LSB: set CPUFreq kernel parameters.
[  OK  ] Stopped LSB: Set the CPU Frequency Scaling governor to "ondemand".
[  OK  ] Stopped LSB: automatic crash report generation.
[  OK  ] Started Store Sound Card State.
         Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
[  OK  ] Stopped target Network is Online.
[  OK  ] Stopped target System Time Synchronized.
[  OK  ] Removed slice user-114.slice.
[  OK  ] Removed slice user-0.slice.
[  OK  ] Removed slice system-getty.slice.
[  OK  ] Stopped /etc/rc.local Compatibility.
         Stopping /etc/rc.local Compatibility...
[  OK  ] Stopped target Network.
         Stopping Network Manager...
         Stopping WPA supplicant...
[  OK  ] Removed slice system-serial\x2dgetty.slice.
[   47.200205] wcn36xx: ERROR hal_remove_bsskey response failed err=16
         Stopping Network Service...
         Stopping Permit User Sessions...
[  OK  ] Stopped Network Service.
[  OK  ] Stopped WPA supplicant.
[  OK  ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Stopped Permit User Sessions.
[  OK  ] Stopped Network Manager.
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped target Remote File Systems (Pre).
         Stopping D-Bus System Message Bus...
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed Syslog Socket.
[  OK  ] Closed OpenBSD Secure Shell server socket.
[  OK  ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped target System Initialization.
         Starting Console System Reboot Logging...
         Stopping LSB: Raise network interfaces....
         Stopping Load/Save RF Kill Switch Status of rfkill1...
[  OK  ] Stopped Apply Kernel Variables.
         Stopping Apply Kernel Variables...
         Stopping Update UTMP about System Boot/Shutdown...
[  OK  ] Stopped Load Kernel Modules.
         Stopping Load Kernel Modules...
[  OK  ] Stopped target Encrypted Volumes.
[  OK  ] Stopped target Swap.
         Stopping Load/Save RF Kill Switch Status of rfkill0...
         Stopping Network Time Synchronization...
[  OK  ] Started Console System Reboot Logging.
[  OK  ] Stopped Network Time Synchronization.
[  OK  ] Stopped LSB: Raise network interfaces..
[  OK  ] Stopped Load/Save RF Kill Switch Status of rfkill1.
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Stopped Load/Save RF Kill Switch Status of rfkill0.
[  OK  ] Removed slice system-systemd\x2drfkill.slice.
         Stopping Load/Save Random Seed...
[  OK  ] Stopped Create Volatile Files and Directories.
         Stopping Create Volatile Files and Directories...
[  OK  ] Stopped target Local File Systems.
         Unmounting Temporary Directory...
         Unmounting /run/user/114/gvfs...
         Unmounting /run/user/0...
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Unmounted Temporary Directory.
[  OK  ] Unmounted /run/user/114/gvfs.
[  OK  ] Unmounted /run/user/0.
         Unmounting /run/user/114...
[  OK  ] Unmounted /run/user/114.
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped target Local File Systems (Pre).
[  OK  ] Stopped Create Static Device Nodes in /dev.
         Stopping Create Static Device Nodes in /dev...
[  OK  ] Stopped Remount Root and Kernel File Systems.
         Stopping Remount Root and Kernel File Systems...
[  OK  ] Reached target Shutdown.
[   50.150451] mmc0: Reset 0x1 never completed.
[   50.161530] reboot: Restarting system

Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
S - IMAGE_VARIANT_STRING=HAAAANAAA
S - OEM_IMAGE_VERSION_STRING=C-BPATTH
S - Boot Config, 0x000002e1
S - Core 0 Frequency, 0 MHz
B -      1546 - PBL, Start
B -      3491 - bootable_media_detect_entry, Start
B -     79815 - bootable_media_detect_success, Start
B -     79820 - elf_loader_entry, Start
B -     82355 - auth_hash_seg_entry, Start
B -     82565 - auth_hash_seg_exit, Start
B -     97204 - elf_segs_hash_verify_entry, Start
B -    156082 - PBL, End
B -    162382 - SBL1, Start
B -    225181 - pm_device_init, Start
D -     14731 - pm_device_init, Delta
B -    240492 - boot_flash_init, Start
D -        30 - boot_flash_init, Delta
B -    244488 - boot_config_data_table_init, Start
D -     18574 - boot_config_data_table_init, Delta - (0 Bytes)
B -    267637 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B -    273829 - sbl1_ddr_set_params, Start
B -    277519 - cpr_init, Start
D -         0 - cpr_init, Delta
B -    283131 - Pre_DDR_clock_init, Start
D -       183 - Pre_DDR_clock_init, Delta
D -         0 - sbl1_ddr_set_params, Delta
B -    295667 - pm_driver_init, Start
D -      6832 - pm_driver_init, Delta
B -    311130 - clock_init, Start
D -        30 - clock_init, Delta
B -    321287 - Image Load, Start
D -     23973 - QSEE Image Loaded, Delta - (460664 Bytes)
B -    345290 - Image Load, Start
D -       427 - SEC Image Loaded, Delta - (2048 Bytes)
B -    352519 - sbl1_efs_handle_cookies, Start
D -        61 - sbl1_efs_handle_cookies, Delta
B -    360296 - Image Load, Start
D -     13481 - QHEE Image Loaded, Delta - (51952 Bytes)
B -    373808 - Image Load, Start
D -     13267 - RPM Image Loaded, Delta - (149492 Bytes)
B -    387106 - Image Load, Start
D -     12444 - APPSBL Image Loaded, Delta - (487604 Bytes)
B -    399580 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -    405253 - SBL1, End
D -    245250 - SBL1, Delta
S - Flash Throughput, 112000 KB/s  (1151760 Bytes,  10217 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[40] SDHC Running in HS200 mode
[60] Done initialization of the card
[70] pm8x41_get_is_cold_boot: cold boot
[70] No 'frp' partition found
[70] Not able to search the panel:
[80] Display not enabled for 24 HW type
[80] Target panel init not found!
[80] pm8x41_get_is_cold_boot: cold boot
[90] partition misc doesn't exist
[90] error in emmc_recovery_init
[90] Unable to locate /bootselect partition
[100] No 'misc' partition found
[100] Error reading MISC partition
[100] failed to get ffbm cookie[110] use_signed_kernel=0, is_unlocked=0, is_ta.
[110] Loading boot image (16699392): start
[220] Loading boot image (16699392): done
[350] DTB Total entry: 15, DTB version: 2
[350] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00
[360] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
[360] target_display_panel_node:510: hw_id=24 panel_name=""
[370] cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=tty0 con:
[390] Updating device tree: start
[450] Updating device tree: done
[460] booting linux @ 0x80080000, ramdisk @ 0x82000000 (2855825), tags/device 0
[460] Jumping to kernel via monitor
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-linaro-lt-qcom (buildslave@x86-64-07) (gcc 5
[    0.000000] CPU: AArch64 Processor [410fd030] revision 0
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: enabling workaround for ARM errata 826319, 8273199
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
[    0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc03bf5a000 s26880 r8192 d36
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total p6
[    0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw root:
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 32768 bytes
[    0.000000] early log buf free: 14660(89%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 byte)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] software IO TLB [mem 0xb6c00000-0xbac00000] (64MB) mapped at [f]
[    0.000000] Memory: 846308K/1026048K available (8627K kernel code, 775K rwd)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8)
[    0.000000]               0xffffffbdc2000000 - 0xffffffbdc3000000   (    16)
[    0.000000]     fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108)
[    0.000000]     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024)
[    0.000000]       .init : 0xffffffc000c5c000 - 0xffffffc000cd5000   (   484)
[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000c5bfd4   ( 12144)
[    0.000000]       .data : 0xffffffc000cdc000 - 0xffffffc000d9de00   (   776)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Running RCU self tests
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU lockdep checking is enabled.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/vi.
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles
[    0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 439s
[    0.000349] Console: colour dummy device 80x25
[    0.003708] console [tty0] enabled
[    0.003740] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Inr
[    0.003786] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.003813] ... MAX_LOCK_DEPTH:          48
[    0.003840] ... MAX_LOCKDEP_KEYS:        8191
[    0.003868] ... CLASSHASH_SIZE:          4096
[    0.003895] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.003922] ... MAX_LOCKDEP_CHAINS:      65536
[    0.003950] ... CHAINHASH_SIZE:          32768
[    0.003978]  memory used by lock dependency info: 8159 kB
[    0.004009]  per task-struct memory footprint: 1920 bytes
[    0.004053] Calibrating delay loop (skipped), value calculated using timer )
[    0.004114] pid_max: default: 32768 minimum: 301
[    0.004382] Security Framework initialized
[    0.004503] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.004544] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 byte)
[    0.006087] Initializing cgroup subsys blkio
[    0.006155] Initializing cgroup subsys memory
[    0.006245] Initializing cgroup subsys devices
[    0.006308] Initializing cgroup subsys hugetlb
[    0.007113] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counte
[    0.007215] EFI services will not be available.
[    0.040850] CPU1: Booted secondary processor
[    0.040865] Detected VIPT I-cache on CPU1
[    0.050641] CPU2: Booted secondary processor
[    0.050653] Detected VIPT I-cache on CPU2
[    0.060686] CPU3: Booted secondary processor
[    0.060700] Detected VIPT I-cache on CPU3
[    0.060934] Brought up 4 CPUs
[    0.061115] SMP: Total of 4 processors activated.
[    0.061145] CPU: All CPU(s) started at EL1
[    0.061335] alternatives: patching kernel code
[    0.063354] devtmpfs: initialized
[    0.103399] DMI not present or invalid.
[    0.104600] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, s
[    0.107576] pinctrl core: initialized pinctrl subsystem
[    0.111717] NET: Registered protocol family 16
[    0.140244] cpuidle: using governor ladder
[    0.180265] cpuidle: using governor menu
[    0.180613] vdso: 2 pages (1 code @ ffffffc000ce1000, 1 data @ ffffffc000ce)
[    0.180755] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.183625] DMA: preallocated 256 KiB pool for atomic allocations
[    0.184329] Serial: AMBA PL011 UART driver
[    0.194307] qcom-smd soc:smd: new channel 'rpm_requests' info-size: 88 fifo4
[    0.224450] irq: no irq domain found for /soc/wcnss-smp2p/slave-kernel !
[    0.228919] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
[    0.285079] msm_iommu 1f00000.qcom,iommu: invalid resource
[    0.285291] msm_iommu 1f00000.qcom,iommu: iface: 0, core: 0
[    0.285397] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) maps
[    0.285712] genirq: Setting trigger mode 1 for irq 155 failed (gic_set_type)
[    0.286044] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 155 failed2
[    0.287917] msm_iommu 1e00000.qcom,iommu: iface: 0, core: 0
[    0.288019] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mas
[    0.288345] genirq: Setting trigger mode 1 for irq 155 failed (gic_set_type)
[    0.288499] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 155 failed2
[    0.300993] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using 1
[    0.301499] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using 2
[    0.302012] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using b2
[    0.302444] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    0.302862] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    0.303267] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
[    0.303668] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[    0.304068] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    0.304473] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    0.304878] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    0.305294] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 8
[    0.305699] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel 9
[    0.306111] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bi0
[    0.306522] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_no1
[    0.306953] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using ba2
[    0.307359] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using 3
[    0.307764] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using b4
[    0.308167] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using5
[    0.308575] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using6
[    0.308983] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using7
[    0.309394] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio usin8
[    0.309806] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 us9
[    0.310496] qcom_iommu: iommu sec: psize[0]: 94208, psize[1]: 0
[    0.312010] vgaarb: loaded
[    0.312626] SCSI subsystem initialized
[    0.313797] usbcore: registered new interface driver usbfs
[    0.313977] usbcore: registered new interface driver hub
[    0.314173] usbcore: registered new device driver usb
[    0.314501] Linux video capture interface: v2.00
[    0.314963] dmi: Firmware registration failed.
[    0.315825] Advanced Linux Sound Architecture Driver Initialized.
[    0.317853] Bluetooth: Core ver 2.20
[    0.317975] NET: Registered protocol family 31
[    0.318008] Bluetooth: HCI device and connection manager initialized
[    0.318100] Bluetooth: HCI socket layer initialized
[    0.318146] Bluetooth: L2CAP socket layer initialized
[    0.318299] Bluetooth: SCO socket layer initialized
[    0.320542] clocksource: Switched to clocksource arch_sys_counter
[    0.346741] NET: Registered protocol family 2
[    0.348252] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.348404] TCP bind hash table entries: 8192 (order: 7, 524288 bytes)
[    0.351144] TCP: Hash tables configured (established 8192 bind 8192)
[    0.351352] UDP hash table entries: 512 (order: 4, 81920 bytes)
[    0.351746] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes)
[    0.352837] NET: Registered protocol family 1
[    0.353706] RPC: Registered named UNIX socket transport module.
[    0.353748] RPC: Registered udp transport module.
[    0.353780] RPC: Registered tcp transport module.
[    0.353813] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.354535] Unpacking initramfs...
[    0.554888] Freeing initrd memory: 2788K (ffffffc002000000 - ffffffc0022b90)
[    0.555845] kvm [1]: HYP mode not available
[    0.560437] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.561070] audit: initializing netlink subsys (disabled)
[    0.561316] audit: type=2000 audit(0.549:1): initialized
[    0.562976] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.598391] VFS: Disk quotas dquot_6.6.0
[    0.599038] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.612022] NFS: Registering the id_resolver key type
[    0.612310] Key type id_resolver registered
[    0.612346] Key type id_legacy registered
[    0.612979] fuse init (API version 7.23)
[    0.614341] 9p: Installing v9fs 9p2000 file system support
[    0.621355] io scheduler noop registered
[    0.622555] io scheduler cfq registered (default)
[    0.645922] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.651593] msm_serial 78af000.serial: msm_serial: detected port #1
[    0.651833] msm_serial 78af000.serial: uartclk = 3686400
[    0.651996] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 132, base_baudM
[    0.653614] msm_serial 78b0000.serial: msm_serial: detected port #0
[    0.653792] msm_serial 78b0000.serial: uartclk = 3686400
[    0.653906] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 133, base_baudM
[    0.653993] msm_serial: console setup on port #0
[    1.717415] console [ttyMSM0] enabled
[    1.723000] msm_serial: driver initialized
[    1.728189] [drm] Initialized drm 1.1.0 20060810
[    1.730149] msm_dsi_phy 1a98300.qcom,mdss_dsi_phy: Failed to get supply 'vd7
[    1.734227] msm_dsi_phy 1a98300.qcom,mdss_dsi_phy: dsi_phy_regulator_init: 7
[    1.741954] msm_dsi_phy 1a98300.qcom,mdss_dsi_phy: dsi_phy_driver_probe: far
[    1.759730] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regular
[    1.761365] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regular
[    1.767966] msm_dsi 1a98000.qcom,mdss_dsi: Failed to get supply 'vdd': -517
[    1.775173] dsi_regulator_init: failed to init regulator, ret=-517
[    1.781856] msm_dsi_host_init: regulator init failed
[    1.788146] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi7
[    1.797246] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[    1.822308] loop: module loaded
[    1.841075] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[    1.865288] tun: Universal TUN/TAP device driver, 1.6
[    1.865345] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.870603] sky2: driver version 1.30
[    1.876487] usbcore: registered new interface driver asix
[    1.879279] usbcore: registered new interface driver ax88179_178a
[    1.884678] usbcore: registered new interface driver cdc_ether
[    1.890742] usbcore: registered new interface driver dm9601
[    1.896459] usbcore: registered new interface driver net1080
[    1.901945] usbcore: registered new interface driver plusb
[    1.907818] usbcore: registered new interface driver cdc_subset
[    1.913134] usbcore: registered new interface driver zaurus
[    1.918997] usbcore: registered new interface driver cdc_ncm
[    1.928168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.930323] ehci-pci: EHCI PCI platform driver
[    1.936773] ehci-platform: EHCI generic platform driver
[    1.941560] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    1.946635] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[    1.952141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.958011] ohci-pci: OHCI PCI platform driver
[    1.964371] ohci-platform: OHCI generic platform driver
[    1.969210] usbcore: registered new interface driver cdc_acm
[    1.973785] cdc_acm: USB Abstract Control Model driver for USB modems and Is
[    1.979859] usbcore: registered new interface driver usblp
[    1.987534] usbcore: registered new interface driver cdc_wdm
[    1.993137] usbcore: registered new interface driver uas
[    1.998935] usbcore: registered new interface driver usb-storage
[    2.004349] usbcore: registered new interface driver usbserial
[    2.010144] usbcore: registered new interface driver usbserial_generic
[    2.016096] usbserial: USB Serial support registered for generic
[    2.033079] usb3503 usb2513: switched to HUB mode
[    2.033129] usb3503 usb2513: usb3503_probe: probed in hub mode
[    2.039520] usbip_core: USB/IP Core v1.0.0
[    2.042665] usbcore: registered new device driver usbip-host
[    2.046613] usbip_host: USB/IP Host Driver v1.0.0
[    2.053677] mousedev: PS/2 mouse device common for all mice
[    2.059587] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi0
[    2.064428] i2c /dev entries driver
[    2.075126] i2c_qup 78b6000.i2c:
[    2.075126]  tx channel not available
[    2.080000] i2c_qup 78b8000.i2c:
[    2.080000]  tx channel not available
[    2.085842] i2c_qup 78ba000.i2c:
[    2.085842]  tx channel not available
[    2.094823] l3: supplied by s3
[    2.101999] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[    2.102722] Bluetooth: HCI UART driver ver 2.3
[    2.107874] Bluetooth: HCI UART protocol H4 registered
[    2.112325] Bluetooth: HCI UART protocol BCSP registered
[    2.117421] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    2.123087] usbcore: registered new interface driver btusb
[    2.129492] sdhci: Secure Digital Host Controller Interface driver
[    2.134468] sdhci: Copyright(c) Pierre Ossman
[    2.140727] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.153554] l5: supplied by s4
[    2.153874] sdhci_msm 7824900.sdhci: Failed getting OCR mask: 0
[    2.200594] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using At
[    2.206119] sdhci_msm 7864900.sdhci: Got CD GPIO
[    2.216980] sdhci_msm 7864900.sdhci: Failed getting OCR mask: 0
[    2.268012] mmc0: MAN_BKOPS_EN bit is not set
[    2.270879] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using At
[    2.273489] mmc0: new high speed MMC card at address 0001
[    2.275973] ledtrig-cpu: registered to indicate activity on CPUs
[    2.277335] usbcore: registered new interface driver usbhid
[    2.277338] usbhid: USB HID core driver
[    2.284864] l7: supplied by s4
[    2.291854] qcom-tz-pil soc:pronto_rproc: Found relocation area 6291456@0x00
[    2.291981]  remoteproc0: soc:pronto_rproc is available
[    2.291986]  remoteproc0: Note: remoteproc is still under development and c.
[    2.291990]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backw.
[    2.292277] qcom-tz-pil soc:vidc_tzpil@0: no crash reason id
[    2.292540] soc:vidc_tzpil@0 supply qcom,pll not found, using dummy regulatr
[    2.292685] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uV, skippg
[    2.292692] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uA, skippg
[    2.292701] qcom-tz-pil soc:vidc_tzpil@0: no wdog IRQ defined
[    2.292709] qcom-tz-pil soc:vidc_tzpil@0: no fatal IRQ defined
[    2.292717] qcom-tz-pil soc:vidc_tzpil@0: no ready IRQ defined
[    2.292724] qcom-tz-pil soc:vidc_tzpil@0: no handover IRQ defined
[    2.292731] qcom-tz-pil soc:vidc_tzpil@0: no stop-ack IRQ defined
[    2.292794] qcom-tz-pil soc:vidc_tzpil@0: Found relocation area 8388608@0x00
[    2.292918]  remoteproc1: soc:vidc_tzpil@0 is available
[    2.292922]  remoteproc1: Note: remoteproc is still under development and c.
[    2.292926]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backw.
[    2.294791]  remoteproc0: Direct firmware load for wcnss.mdt failed with er2
[    2.294802]  remoteproc0: failed to load soc:pronto_rproc
[    2.295078]  remoteproc1: Direct firmware load for venus.mdt failed with er2
[    2.295088]  remoteproc1: failed to load soc:vidc_tzpil@0
[    2.298554] usbcore: registered new interface driver snd-usb-audio
[    2.300915] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platfo2
[    2.301002] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platfo2
[    2.301100] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platfo2
[    2.301210] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platfo2
[    2.303612] qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[    2.303620] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[    2.307638] NET: Registered protocol family 10
[    2.311254] sit: IPv6 over IPv4 tunneling driver
[    2.313353] NET: Registered protocol family 17
[    2.313558] Bluetooth: RFCOMM TTY layer initialized
[    2.313577] Bluetooth: RFCOMM socket layer initialized
[    2.313614] Bluetooth: RFCOMM ver 1.11
[    2.313651] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.313738] Bluetooth: HIDP socket layer initialized
[    2.314075] 9pnet: Installing 9P2000 support
[    2.314426] Key type dns_resolver registered
[    2.316953] registered taskstats version 1
[    2.318748] l6: supplied by s4
[    2.325713] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regular
[    2.326530] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regular
[    2.327003] l2: supplied by s3
[    2.357445] msm 1a00000.qcom,mdss_mdp: bound 1a98000.qcom,mdss_dsi (ops dsi)
[    2.357489] msm 1a00000.qcom,mdss_mdp: bound 1c00000.qcom,adreno-3xx (ops a)
[    2.357583] 1a00000.qcom,mdss_mdp supply vdd not found, using dummy regulatr
[    2.376635] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.376639] [drm] No driver support for vblank timestamp query.
[    2.378707] msm 1a00000.qcom,mdss_mdp: No connectors reported connected wits
[    2.378722] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.629267] mmcblk0: mmc0:0001 DS2008 7.28 GiB
[    2.629517] mmcblk0boot0: mmc0:0001 DS2008 partition 1 4.00 MiB
[    2.629756] mmcblk0boot1: mmc0:0001 DS2008 partition 2 4.00 MiB
[    2.630001] mmcblk0rpmb: mmc0:0001 DS2008 partition 3 4.00 MiB
[    2.636091] Alternate GPT is invalid, using primary GPT.
[    2.636130]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[    2.643711] Console: switching to colour frame buffer device 128x48
[    2.689837] msm 1a00000.qcom,mdss_mdp: fb0: msm frame buffer device
[    2.695784] msm 1a00000.qcom,mdss_mdp: registered panic notifier
[    2.740667] [drm] Initialized msm 1.0.0 20130625 on minor 0
[    2.742129] msm_otg 78d9000.phy: OTG regs = ffffff800050a000
[    2.745702] msm_otg 78d9000.phy: no vddcx
[    2.861650] msm_hsusb_host 78d9000.ehci: EHCI Host Controller
[    2.863886] msm_hsusb_host 78d9000.ehci: new USB bus registered, assigned b1
[    2.867702] msm_hsusb_host 78d9000.ehci: irq 144, io mem 0x078d9000
[    2.887131] CPR closed loop is enabled
[    2.888037] CPR is enabled!
[    2.890611] msm_hsusb_host 78d9000.ehci: USB 2.0 started, EHCI 1.00
[    2.894347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.898856] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumbe1
[    2.905835] usb usb1: Product: EHCI Host Controller
[    2.906005] qcom-apq8016-sbc 7702000.sound: adv7511 <-> Quatenary MI2S mappk
[    2.917700] usb usb1: Manufacturer: Linux 4.2.0-linaro-lt-qcom ehci_hcd
[    2.926312] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[    2.935642] usb usb1: SerialNumber: 78d9000.ehci
[    2.943735] hctosys: unable to open rtc device (rtc0)
[    2.945486] hub 1-0:1.0: USB hub found
[    2.945666] hub 1-0:1.0: 1 port detected
[    2.982422] ALSA device list:
[    2.986427]   #0: DB410c
[    2.992276] Freeing unused kernel memory: 484K (ffffffc000c5c000 - ffffffc0)
[    2.996413] Freeing alternatives memory: 16K (ffffffc000cd5000 - ffffffc000)
Loading, please wait...
starting version 219
[    3.104485] random: systemd-udevd urandom read with 3 bits of entropy availe
[    3.260610] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... don.
[    3.411373] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
[    3.415951] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber0
[    3.443888] hub 1-1:1.0: USB hub found
[    3.448640] hub 1-1:1.0: 3 ports detected
Begin: Running /scripts/local-premount ... done.
[    3.621459] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode)
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.

Welcome to Ubuntu 15.04!

Cannot add dependency job for unit org.freedesktop.resolve1.busname, ignoring:.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Set up automount Arbitrary Executab...ats File System Automount Point.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Swap.
[  OK  ] Created slice Root Slice.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Created slice System Slice.
         Starting Create list of required st... nodes for the current kernel...
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Mounting POSIX Message Queue File System...
         Starting Nameserver information manager...
[  OK  ] Started Boot Process Profiler.
         Starting Boot Process Profiler...
         Starting Remount Root and Kernel File Systems...
         Starting Increase datagram queue length...
         Mounting Debug File System...
         Mounting Huge Pages File System...
[  OK  ] Created slice system-getty.slice.
         Mounting Temporary Directory...
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Delayed Shutdown Socket.
         Starting Setup Virtual Console...
[  OK  ] Started Read required files in advance.
         Starting Read required files in advance...
[  OK  ] Listening on networkd rtnetlink socket.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
         Starting Load Kernel Modules...
         Starting udev Coldplug all Devices...
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Increase datagram queue length.
[  OK  ] Started Setup Virtual Console.
[  OK  ] Started Nameserver information manager.
ureadahead.service failed.
[  OK  ] Started Load Kernel Modules.
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Wait for all "auto" /etc/n... up for network-online.target...
[  OK  ] Reached target Remote File Systems.
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Set console keymap...
         Starting LSB: Raise network interfaces....
[  OK  ] Started Wait for all "auto" /etc/ne...be up for network-online.target.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Journal Service.
[FAILED] Failed to start Set console keymap.
See "systemctl status console-setup.service" for details.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started udev Kernel Device Manager.
         Starting Copy rules generated while the root was ro...
[  OK  ] Reached target Paths.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Copy rules generated while the root was ro.
         Starting Create Volatile Files and Directories...
[  OK  ] Started LSB: Raise network interfaces..
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Reached target System Initialization.
         Starting Restore Sound Card State...
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
         Starting Console System Startup Logging...
[  OK  ] Reached target Timers.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on OpenBSD Secure Shell server socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Run anacron jobs.
         Starting Run anacron jobs...
         Starting Modem Manager...
         Starting Restore /etc/resolv.conf i...e the ppp link was shut down....
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting RealtimeKit Scheduling Policy Service...
         Starting System Logging Service...
         Starting Network Manager...
         Starting D-Bus System Message Bus...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting WPA supplicant...
[  OK  ] Reached target Containers.
         Starting LSB: automatic crash report generation...
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
         Starting Accounts Service...
         Starting Login Service...
         Starting Provide limited super user privileges to specific users...
[  OK  ] Started Regular background program processing daemon.
         Starting Regular background program processing daemon...
         Starting Console Manager...
         Starting Permit User Sessions...
[  OK  ] Started System Logging Service.
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started Console System Startup Logging.
[    6.917983] qcom-smd soc:smd: new channel 'IPCRTR' info-size: 40 fifo-size:2
[  OK  ] Started Restore /etc/resolv.conf if...ore the ppp link was shut down[4
..
[    6.969276] qcom-smd soc:smd: new channel 'APPS_RIVA_CTRL' info-size: 40 fi2
[    6.974303] qcom-smd soc:smd: new channel 'APPS_RIVA_DATA' info-size: 40 fi2
[  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Started D-Bus System Message Bus.
[    7.173788] qcom-smd soc:smd: new channel 'WCNSS_CTRL' info-size: 40 fifo-s2
[    7.187226] qcom-smd soc:smd: new channel 'WLAN_CTRL' info-size: 40 fifo-si2
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started WPA supplicant.
[  OK  ] Started RealtimeKit Scheduling Policy Service.
[  OK  ] Started LSB: automatic crash report generation.
[  OK  ] Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
[  OK  ] Started Provide limited super user privileges to specific users.
[  OK  ] Started Permit User Sessions.
[  OK  ] Found device /dev/ttyMSM0.
[  OK  ] Started Login Service.
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
         Starting wifi mac address generator...
[  OK  ] Created slice system-ifup.slice.
[  OK  ] Started ifup for sit0.
         Starting ifup for sit0...
[  OK  ] Reached target Sound Card.
         Starting Light Display Manager...
         Starting Network Service...
         Starting LSB: set CPUFreq kernel parameters...
[  OK  ] Started wifi mac address generator.
[  OK  ] Started Network Service.
[  OK  ] Started LSB: set CPUFreq kernel parameters.
[  OK  ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Started Accounts Service.
[  OK  ] Started Console Manager.
[  OK  ] Started Modem Manager.
[  OK  ] Started Network Manager.
[  OK  ] Started Light Display Manager.
         Starting Network Manager Wait Online...
[  OK  ] Reached target Network.
         Starting /etc/rc.local Compatibility...
         Starting Network Name Resolution...
[  OK  ] Started Network Manager Wait Online.
[    8.563095] qcom-smd soc:smd: new channel 'APPS_RIVA_BT_CMD' info-size: 40 2
[    8.577517] qcom-smd soc:smd: new channel 'APPS_RIVA_BT_ACL' info-size: 40 2
[    8.583509] qcom-smd soc:smd: new channel 'APPS_RIVA_ANT_CMD' info-size: 404
[    8.590445] qcom-smd soc:smd: new channel 'APPS_RIVA_ANT_DATA' info-size: 48
[    8.598764] qcom-smd soc:smd: new channel 'APPS_FM' info-size: 40 fifo-size2
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started Network Name Resolution.
         Starting Wait for Plymouth Boot Screen to Quit...
[  OK  ] Reached target Network is Online.
         Starting LSB: Tool to automatically...ubmit kernel crash signatures...
[  OK  ] Started Wait for Plymouth Boot Screen to Quit.
[  OK  ] Started Getty on tty1.
         Starting Getty on tty1...
[  OK  ] Started Serial Getty on ttyMSM0.
         Starting Serial Getty on ttyMSM0...
[  OK  ] Reached target Login Prompts.
[  OK  ] Started LSB: Tool to automatically ... submit kernel crash signatures.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Ubuntu 15.04 linaro-alip ttyMSM0

linaro-alip login: root (automatic login)

Last login: Sat Feb 20 06:09:05 UTC 2016 on ttyMSM0
root@linaro-alip:~# [   10.266873] tty driver smd lacks a write_room method.
[   10.269509] tty driver smd lacks a write_room method.
[   10.274415] tty driver smd lacks a write_room method.