en.xml

<?xml version="1.0" encoding="UTF-8"?>
<resources>
<translation revision="0.9" language="English" languageInEnglish="English" author="XYZ">
<t id="W_XYZWARE">XYZware Open Mod</t>
<t id="B_IMPORT">Import</t>
<t id="B_EXPORT">Export</t>
<t id="B_SAVE">Save</t>
<t id="B_PRINT">Print</t>
<t id="B_SETTING">Setting</t>
<t id="B_VIEW">View</t>
<t id="B_TOP">Top</t>
<t id="B_LEFT">Left</t>
<t id="B_RIGHT">Right</t>
<t id="B_FRONT">Front</t>
<t id="B_BACK">Back</t>
<t id="B_BOTTOM">Bottom</t>
<t id="B_RESET">Reset</t>
<t id="B_MOVE">Move</t>
<t id="B_ROTATE">Rotate</t>
<t id="L_MIN">Min</t>
<t id="L_MAX">Max</t>
<t id="B_SCALE">Scale</t>
<t id="B_INFO">Info</t>
<t id="B_REMOVE">Remove</t>
<t id="L_SLICING">Object Slicing…</t>
<t id="L_TRANSMITTING">Object Transmitting…</t>
<t id="L_DONE">Done</t>
<t id="W_PRINT">Print</t>
<t id="L_PRINTER">Printer</t>
<t id="L_MATERIAL">Material</t>
<t id="L_QUALITY">Quality</t>
<t id="QUALITY_STANDARD">Good</t>
<t id="QUALITY_LOW">Normal</t>
<t id="QUALITY_HIGH">Excellent</t>
<t id="L_RAFT">Raft</t>
<t id="L_SUPPORTS">Supports</t>
<t id="L_ADVANCED_SETTING">Advanced Settings</t>
<t id="L_PROFILES">Profiles</t>
<t id="PROFILES_CREATE">Create</t>
<t id="PROFILES_DELETE">Delete</t>
<t id="L_FILL_DENSITY">3D Density</t>
<t id="FILL_DENSITY_HOLLOW">Hollow (0%)</t>
<t id="FILL_DENSITY_SMALL">Low (10%)</t>
<t id="FILL_DENSITY_MEDIUM">Medium (30%)</t>
<t id="FILL_DENSITY_LARGE">High (50%)</t>
<t id="FILL_DENSITY_SOLID">Solid (90%)</t>
<t id="L_LAYER_HEIGHT">Layer Height</t>
<t id="L_SHELLS">Shells</t>
<t id="SHELLS_THIN">Thin</t>
<t id="SHELLS_NORMAL">Normal</t>
<t id="SHELLS_THICK">Thick</t>
<t id="L_SPEED">Speed</t>
<t id="SPEED_SLOW">Slow</t>
<t id="SPEED_NORMAL">Standard</t>
<t id="SPEED_FAST">Fast</t>
<t id="B_MORE">Advanced</t>
<t id="B_LESS">Basic</t>
<t id="B_CANCEL">Cancel</t>
<t id="W_EXPORT">Export </t>
<t id="L_EXPORT">To File Save</t>
<t id="L_FOR_PRINTER">To Print</t>
<t id="W_OBJECT_INFOMATION">Object Information</t>
<t id="L_FILENAME">Filename</t>
<t id="L_VOLUME">Volume</t>
<t id="L_COLLISION">Object Collision</t>
<t id="L_DIMENSION">Dimension</t>
<t id="L_POSITION">Position</t>
<t id="L_SIZE">Size</t>
<t id="B_CLOSE">Close</t>
<t id="W_HELP">About</t>
<t id="G_VERSION">Version</t>
<t id="L_SOFTWARE">Software</t>
<t id="L_FIRMWARE">Firmware</t>
<t id="L_COPYRIGHTS">Copyrights</t>
<t id="L_COPYRIGHTS_TEXT">Copyright © XYZprinting, Inc. All Rights Reserved</t>
<t id="B_ONLINE_GUIDE">Online Help</t>
<t id="W_SETTING">Settings</t>
<t id="G_LANGUAGE">Language</t>
<t id="G_FIRMWARE">Firmware</t>
<t id="L_VERSION">Version</t>
<t id="W_FW_UPGRADE">Firmware Upgrade</t>
<t id="B_FW_UPGRADE">Firmware Upgrade</t>
<t id="L_FW_UPGRADING">Fw Upgrading</t>
<t id="L_FW_PLEASE_WAIT">Waiting…</t>
<t id="L_FW_UPGRAD_FAILED">Fw Upgrade Failed!</t>
<t id="L_FW_UPGRAD_SUCCESS">Your printer is now updated!
&#x000A;
Press OK and start using it.</t>
<t id="W_PRINTING_STATUS">Printing Status</t>
<t id="L_PRINTING">Printing…</t>
<t id="L_PTINT_TASK_PAUSED">Task Pause</t>
<t id="L_PRINT_TIME">Print Time</t>
<t id="B_HIDE">Hide</t>
<t id="W_PRINTING_TASK_CANCELING">Printing Cancel</t>
<t id="L_PRINTING_TASK_CANCELING">Printing Abort, are you sure? </t>
<t id="B_YES">Yes</t>
<t id="B_NO">No</t>
<t id="W_PRINT_TASK_FINISH">Printing Finish</t>
<t id="L_PRINT_TASK_FINISH">Object printing completed.</t>
<t id="W_IMPORT_FILE">Import File</t>
<t id="W_SAVE_FILE_STL">Save As (*stl)</t>
<t id="W_SAVE_FILE_3W">Save As (*3w)</t>
<t id="M_NO_OBJECT_LOADED">Object not found</t>
<t id="M_ERROR_DEVICE">Error Device</t>
<t id="M_MACHINE_ERROR">Printer Error</t>
<t id="M_MACHINEMODEL_ERROR">Printer mismatch - Please change your printer settings and make sure you have selected the correct printer model.

For troubleshooting, please refer to our user guide.</t>
<t id="M_MACHINE_BUSY">Printer is busy. Please try again later.</t>
<t id="M_NONE_DEVICE">Device not found</t>
<t id="W_GCODE_NOT_FOUND">Generate error</t>
<t id="L_GCODE_NOT_FOUND_INFO_1">Generate *3w files fail!</t>
<t id="L_GCODE_NOT_FOUND_INFO_2">Reasons:</t>
<t id="L_GCODE_NOT_FOUND_INFO_3">a. Object slicer error or slicing uncomplete.</t>
<t id="L_GCODE_NOT_FOUND_INFO_4">b. Unknown object slicer file type.</t>
<t id="W_PRINTER_BED_FULL">Message</t>
<t id="M_PRINTER_BED_FULL_TEXT">Printing area full. New loading objects will not be printed.</t>
<t id="W_CONFIRM_SAVE">Confirm</t>
<t id="M_CONFIRM_SAVE">Save Now?</t>
<t id="W_OBJECTS_OUTSIDE_SLICE_QUEST">Message</t>
<t id="M_OBJECTS_OUTSIDE_SLICE_QUEST">Objects are out of the print area or collision, continue?</t>
<t id="W_OBJECT_IS_NON_MANIFOLD">Manifold Error</t>
<t id="M_OBJECT_IS_NON_MANIFOLD">This *stl file non-manifold and slicing might have failed, continue? </t>
<t id="W_LOAD_STL_FILE_ERROR">Format Error</t>
<t id="M_LOAD_STL_FILE_ERROR">Please load *stl type of files</t>
<t id="L_ABS">ABS</t>
<t id="L_PLA">PLA</t>
<t id="B_LAND">Land</t>
<t id="W_CREATE_PROFILE">Create Profiles</t>
<t id="M_CREATE_PROFILE_NAME">Profiles Name</t>
<t id="B_HELP">Help</t>
<t id="L_MODELING">Loading model…</t>
<t id="M_DISCONNECT_DEVICE">Printer disconnected.</t>
<t id="W_OBJ_TOO_SMALL">Object is too small</t>
<t id="M_OBJ_TOO_SMALL">Do you want to auto resize object?</t>
<t id="L_ELAPSED_TIME">Elapsed Time</t>
<t id="L_PRODUCT_REGISTRATION">Register Printer</t>
<t id="G_SERIAL_NUMBER">Serial Number</t>
<t id="G_REGISTATION_STATUS">Registration Status</t>
<t id="L_REGISTATION_STATUS_TEXT">Printer not registered. Take a minute to finish the registration, and enjoy the benefit with us!</t>
<t id="B_YES_DO_IT">Register Now</t>
<t id="B_NO_NOT_YET">Later</t>
<t id="L_PRINTER_MONITOR">Printer Monitor</t>
<t id="L_ESTIMATED_TIME">Estimated Time</t>
<t id="L_PRINT_BED">Heated Bed</t>
<t id="L_EXTRUDER">Extruder</t>
<t id="L_DOWNLOADING">Downloading update file…</t>
<t id="M_ALREADY_LAST_VERSION">Already up to the latest version</t>
<t id="M_ONLINE_SERVICE_UNAVAILABLE">Oops! Online service is not avilable. Please try again later!</t>
<t id="M_HAVE_NEW_VERSION">New version available. Update now ?</t>
<t id="W_HAVE_NEW_VERSION">New version found</t>
<t id="B_SW_UPGRADE">Software Update</t>
<t id="G_EXTRUDER_COLOR">Preview Color </t>
<t id="G_PRINTER_TYPE">Printer Type</t>
<t id="G_AUTO_FEEDBACK">Auto Feedback</t>
<t id="L_AUTO_FEEDBACK_TEXT">I would like to participate in the user experience improvement program, system parameters will be sent to XYZprinting automatically.</t>
<t id="M_THERMAL_HEATER_OUT_TIMER">Heating Error.
Please turn off the printer and contact service center for support.
ERROR CODE: 0011</t>
<t id="M_THERMAL_HEATER_OUT_TIMER1">Heating Error.
Please turn off the printer and contact service center for support.
ERROR CODE: 0012</t>
<t id="M_THERMAL_BED_OUT_TIMER">Heating Error.
Please turn off the printer and contact service center for support.
ERROR CODE: 0003</t>
<t id="M_THERMAL_HEATER_OUT_CONTROL">Heating Error.
Please turn off the printer and contact service center for support.
ERROR CODE: 0014</t>
<t id="M_THERMAL_HEATER_OUT_CONTROL1">Heating Error.
Please turn off the printer and contact service center for support.
ERROR CODE: 0015</t>
<t id="M_THERMAL_BED_OUT_CONTROL">Heating Error.
Please turn off the printer and contact service center for support.
ERROR CODE: 0013</t>
<t id="M_SD_ERROR">Storage Error.
Please turn off the printer and contact service center for support.
ERROR CODE: 0040</t>
<t id="M_EEPROM_WRITE_ERROR">Cartridge 1 Error
Please remove cartridge and install again.
If errors exist, please contact service center for support.
ERROR CODE: 0007</t>
<t id="M_EEPROM_WRITE_ERROR1">Cartridge 2 Error
Please remove cartridge and install again.
If errors exist, please contact service center for support.
ERROR CODE: 0007</t>
<t id="M_EEPROM_READ_ERROR">Cartridge 1 Error
Please remove cartridge and install again.
If errors exist, please contact service center for support.
ERROR CODE: 0008</t>
<t id="M_EEPROM_READ_ERROR1">Cartridge 2 Error
Please remove cartridge and install again.
If errors exist, please contact service center for support.
ERROR CODE: 0008</t>
<t id="M_MACHINE_ERROR_X_AXIS">Printer motor Error(X-Axis)
If errors exist, please contact service center for support.
ERROR CODE: 0030</t>
<t id="M_MACHINE_ERROR_Y_AXIS">Printer motor Error(Y-Axis)
If errors exist, please contact service center for support.
ERROR CODE: 0031</t>
<t id="M_MACHINE_ERROR_Z_AXIS">Printer motor Error(Z-Axis)
If errors exist, please contact service center for support.
ERROR CODE: 0032</t>
<t id="M_FW_UPDATE_ERROR">Update firmware Error.
Please try again later.</t>
<t id="M_FILAMENT_JAM">Filament Jammed ! Please check out Extruder 1 and clean up the noozle.</t>
<t id="M_FILAMENT_JAM1">Filament Jammed ! Please check out Extruder 2 and clean up the noozle.</t>
<t id="M_FILAMENT_OUT">Cartridge 1 not installed properly.
Please reinstall Cartridge 1 ("Unload Filament" then "Load Filament") on your printer.
If error persists, please contact service center for further support.
ERROR CODE: 0016</t>
<t id="M_FILAMENT_OUT1">Cartridge 2 not installed properly.
Please reinstall Cartridge 2 ("Unload Filament" then "Load Filament") on your printer.
If error persists, please contact service center for further support.
ERROR CODE: 0016</t>
<t id="M_FILAMENT_WRONG">Cartridge 1 is invalid or damaged. Please replace Cartridge 1.</t>
<t id="M_FILAMENT_WRONG1">Cartridge 1 is invalid or damaged. Please replace Cartridge 2.</t>
<t id="M_FLASHMEMORY_ERROR">Memory Error Please contact service center for support. ERROR CODE:0050</t>
<t id="M_TOP_DOOR_OPEN">Printer top door open. Please colse the top door.</t>
<t id="M_FRONT_DOOR_OPEN">Printer front door open. Please close the front door.</t>
<t id="M_FILAMENT_LOW">Cartridge 1 is low on filament.</t>
<t id="M_FILAMENT_LOW1">Cartridge 2 is low on filament.</t>
<t id="M_FILAMENT_LOW_TO_EMPTY">Cartridge 1 is running out, please replace a new cartridge if available.</t>
<t id="M_FILAMENT_LOW_TO_EMPTY1">Cartridge 2 is running out, please replace a new cartridge if available</t>
<t id="M_FILAMENT_END">There is no filament left in Cartridge 1. Please replace Cartridge 1 immediately.</t>
<t id="M_FILAMENT_END1">There is no filament left in Cartridge 2. Please replace Cartridge 2 immediately.</t>
<t id="L_EXTRUDER_WARNING_TEXT">Only for screen preview</t>
<t id="M_NO_CASSETTE">Cartridge 1 can not be found. Please install one.  ERROR CODE:0028</t>
<t id="M_NO_CASSETTE1">Cartridge 2 can not be found. Please install one.  ERROR CODE:0028</t>
<t id="M_CASSETTE_EMPTY">There is no filament left in Cartridge 1. Please replace Cartridge 1 before printing.  ERROR CODE:0029</t>
<t id="M_CASSETTE_EMPTY1">There is no filament left in Cartridge 2. Please replace Cartridge 2 before printing.  ERROR CODE:0029</t>
<t id="M_PC_COMMUNICATION_ERROR">Printer Error.  ERROR CODE:0201</t>
<t id="G_AUTO_POSITION">Auto Position</t>
<t id="L_AUTO_POSITION">Import object (s) with auto position</t>
<t id="M_FILMENT_TOO_LOW">Insufficient filament in cartridge for printing this object!
Please replace Cartridge</t>
<t id="L_PRINT_CONTINUE_PRINTERING">... continue printing?</t>
<t id="L_USE_MATERIALS">Estimated Usage</t>
<t id="L_REMAINING_MATERIALS">Current Capacity</t>
<t id="M_OPGNGL_ERROR">has been detected in your system.
However, OpenGL Version 2.1 or higher is required for XYZware.

Please update your Display Driver and restart XYZware.</t>
<t id="M_OPGNGL_VERSION">OpenGL Version</t>
<t id="L_FILE_FORMAT">File Format</t>
<t id="M_FILAMENT1">Cartridge 1</t>
<t id="M_FILAMENT2">Cartridge 2</t>
<t id="L_FW_UPGRAD_HEAD">Firmware Update</t>
<t id="L_FW_UPGRAD_STATE">Updating Firmware for printer.
 Do NOT power off your printer now</t>
<t id="B_REFRESH">Refresh</t>
<t id="L_MY_PRINTER">My Printer</t>
<t id="B_CONNECT">Connect</t>
<t id="B_CONNECTED">Connected</t>
<t id="L_CHANGE_PRINTER_LANGUAGE">Do you want to change your printer language to Japanese now?
&#x000A;
&#x000A;
Your printer is currently using different language ( English ) than your operating system ( Japanese )</t>
<t id="B_CANCEL">Cancel</t>
<t id="C_DONT_ASK_ME_AGAIN">Don't ask me again</t>
<t id="B_OK">OK</t>
<t id="L_EXTRUDER_X">Extruder</t>
<t id="L_OUTPUT_PERCENT">Output Percent</t>
<t id="L_OFF">OFF</t>
<t id="L_IDLE">IDLE</t>
<t id="L_DISCONNECTED">Disconnected</t>
<t id="L_ANA_CORRECTED_NORMAL_ORIENTATIONS">Corrected Normal Orientations:</t>
<t id="L_STARTING_ANALYSER">Starting Analyiser</t>
<t id="L_ANA_VERTICES">Vertices:</t>
<t id="L_ANA_FACES">Faces:</t>
<t id="L_OBJECT_IS_MANIFOLD">Object is manifold</t>
<t id="L_ANALYSER_FINISHED">Analyiser Completed</t>
<t id="L_HEATING_EXTRUDER">Heating Extruder...</t>
<t id="L_X_COMMANDS_WAITING">Waiting On Commands</t>
<t id="L_HEATERS_ON_QUEST">Turn off heaters before disconnecting?</t>
<t id="L_EDITOR_R">R</t>
<t id="L_EDITOR_C">C</t>
<t id="L_LAYER_X">Layer</t>
<t id="L_PRINTING_TIME:">Print Time:</t>
<t id="L_FILAMENT_POS">Fil:</t>
<t id="L_TIME_H:">:</t>
<t id="L_TIME_M:">:</t>
<t id="L_TIME_S">:</t>
<t id="W_COPY_MARKED_OBJECTS">Copy Selected</t>
<t id="L_NUMBER_OF_COPIES:">Copies :</t>
<t id="L_AUTO_POSITION_AFTER_COPY">Autoposition after copying?</t>
<t id="B_COPY">Copy</t>
<t id="L_SLICING_EXT">Using External Slic3r...</t>
</translation>
</resources>