CupHeadFlickerBug

#include "FastLED.h"

// How many leds are in the strip?
#define numLeds 144

#define pin1 10
#define pin2 11
#define pin3 9

#define strip1 65
#define strip2 62
#define strip3 17

// This is an array of leds.  One item for each led in your strip.
CRGB leds[numLeds];

#define numRows 9
byte stripLens[numRows] = {3, 9, 14, 18, 21, 23, 22, 19, 15};
byte stripStart[numRows] = {0, 3, 12, 26, 44, 65, 88, 110, 129};


// This function sets up the ledsand tells the controller about them
void setup() {
// sanity check delay - allows reprogramming if accidently blowing power w/leds
    delay(2000);

      FastLED.addLeds<WS2812B, pin1, GRB>(leds, strip1);
      FastLED.addLeds<WS2812B, pin2, GRB>(leds, strip1, strip2);
      FastLED.addLeds<WS2812B, pin3, GRB>(leds, strip1 + strip2, strip3);
      set_max_power_in_volts_and_milliamps( 5, 3000);
      FastLED.setDither( 0 );
      FastLED.setBrightness(255);
}

void setAllColor(CRGB color)
{
  byte curLed = numLeds;
  while(curLed--)
  {
    leds[curLed] = color;
  }
}

void debugBlink (CRGB color)
{
  setAllColor(color);
  FastLED.show();
  delay(50);
}

// This function runs over and over, and is where you do the magic to light
// your leds.
void loop() {
  static uint8_t hue = 0;

  debugBlink(CRGB::Red);  // flash a color so I can tell which is which
  // this is rock solid
  setAllColor(CRGB::White);
  FastLED.show();
  FastLED.delay(3000);

  debugBlink(CRGB::Blue);   // flash a color so I can tell which is which
  // this is rock solid
  setAllColor(CRGB::White);
  FastLED.show();
  delay(3000);

  debugBlink(CRGB::Green);    // flash a color so I can tell which is which
  // lots of flickering
  setAllColor(CRGB::White);
  show_at_max_brightness_for_power();
  delay_at_max_brightness_for_power(3000);

  debugBlink(CRGB::Purple);    // flash a color so I can tell which is which
  // this is flickering purple
  FastLED.showColor(CRGB::White);
  FastLED.delay(3000);
}