2017-09-01 21:44:45  ★ Timothy Pickett drags the tool chest nearby, as he leans inside and grabs for a 17 mm spanner.
2017-09-01 21:45:04  ★ Timothy Pickett leans behind the rails of the car, proceeding to clip the spanner over the bolt, making a-
2017-09-01 21:45:20  ★ -counter clockwise motion to release the bolt, also undoing the other 3 bolts that hold the      ((Timothy Pickett))
2017-09-01 21:45:25  ★ -seat set on the rail.      ((Timothy Pickett))
2017-09-01 21:45:40  ★ Timothy Pickett grasps onto the seat and clicks it out of the rail, carefully maneuvring it out of the -
2017-09-01 21:45:46  ★ -vehicle, as he sets it down alongside the wall.      ((Timothy Pickett))
2017-09-01 21:45:56  ✪ Timothy Pickett writes a note on a piece of paper.
2017-09-01 21:46:01  You dropped a Note.
2017-09-01 21:46:01  * Timothy Pickett dropped a Note. *
2017-09-01 21:46:17  ★ Timothy Pickett leans inside the vehicle and takes the spanner again, sitting on the rear seats, as he leans
2017-09-01 21:46:35  ★ -over to access the bolts holding the passenger seat, twisting them counter-clockwise as-      ((Timothy Pickett))
2017-09-01 21:46:39  ★ -well in order to release them.      ((Timothy Pickett))
2017-09-01 21:47:18  ★ Timothy Pickett grabs onto the seat, again carefully maneuvring the seat out of the door opening to -
2017-09-01 21:47:30  ★ -plant it down next to the driver's seat, after clicking it out of the rail.      ((Timothy Pickett))
2017-09-01 21:47:42  ✪ Timothy Pickett writes a note on a piece of paper.
2017-09-01 22:15:47  ★ Timothy Pickett climbs back inside the car, folding the rear seats forwards, as he peeks inside and -
2017-09-01 22:16:08  ★ -gauges the bolt size, climbing back out to take a spanner with 16 mm bit.      ((Timothy Pickett))
2017-09-01 22:16:18  ★ Timothy Pickett climbs back inside the car and leans over the reclined back seat, placing the spanner on -
2017-09-01 22:16:44  ★ -the bolt, as he proceeds to make a counter-clockwise motion, releasing the first bolt, -      ((Timothy Pickett))
2017-09-01 22:17:00  ★ -shortly followed by the other 7 bolts.      ((Timothy Pickett))
2017-09-01 22:17:12  ★ Timothy Pickett extends his hands towards the bolts, collecting them as he tosses them out of the vehicle.
2017-09-01 22:17:32  ★ Timothy Pickett reaches down towards the sitting part of the back seat, carefully extracting it from the -
2017-09-01 22:17:41  ★ -vehicle, as he plants it against the wall.      ((Timothy Pickett))
2017-09-01 22:19:07  ★ Timothy Pickett picks the spanner back up, sliding back inside the vehicle, as he grins and looks at Emilio,
2017-09-01 22:19:10  ★ -stepping out of the vehicle.      ((Timothy Pickett))
2017-09-01 22:19:27  ★ Timothy Pickett reaches for the toolbench, after pacing over towards it, taking an extended power cord, -
2017-09-01 22:19:41  ★ -plugging it into the wall socket, as he leads it towards the vehicle.      ((Timothy Pickett))
2017-09-01 22:19:57  ★ Timothy Pickett reaches for the toolbench, tugging on the handle of the angle grinder, taking it to the -
2017-09-01 22:20:11  ★ -vehicle, as he plugs it in to the extension cord, stepping back into the vehicle.t      ((Timothy Pickett))
2017-09-01 22:20:32  ★ Timothy Pickett puts some ear plugs in his ears, as he turns the angle grinder on, leaning against the seat
2017-09-01 22:20:49  ★ -as he plants the rotating disc against the bracket, slowly cutting through the metal -      ((Timothy Pickett))
2017-09-01 22:21:12  ★ completely, as he then turns around and adjusts the cord to not get it in the way-      ((Timothy Pickett))
2017-09-01 22:21:33  ★ -and cuts through the other bracket, thus releasing the backrest of the rear seating -      ((Timothy Pickett))
2017-09-01 22:21:51  ★ -arrangements. He turns off the angle grinder and waits for the disc to stop rotating, -      ((Timothy Pickett))
2017-09-01 22:22:37  ★ -before setting it back down, grasping onto the backrest, and carries it out of the vehicle,      ((Timothy Pickett))
2017-09-01 22:22:43  ★ -throwing it on the stack of discarded car parts.      ((Timothy Pickett))
2017-09-01 22:22:56  ★ Timothy Pickett reaches for the spanner and releases the remainder of the brackets by undoing the two bolts-
2017-09-01 22:23:01  ★ -and throws them out of the vehicle as well.      ((Timothy Pickett))
2017-09-01 22:24:11  ★ Timothy Pickett takes a long, flat screwdriver, as he reaches  behind the module for the electric window-
2017-09-01 22:24:26  ★ -switches, popping it out of the door cover, as he pulls out the plug, and then drops the -      ((Timothy Pickett))
2017-09-01 22:24:29  ★ -module.      ((Timothy Pickett))
2017-09-01 22:24:44  ★ Timothy Pickett reaches for the cover of the handle on the door handle, popping it off as well, leaning -
2017-09-01 22:25:07  ★ -out to access the tool chest. He picks up a small rattle spanner, taking two extension part      ((Timothy Pickett))
2017-09-01 22:25:24  ★ -as he clicks them on, along with a 10MM bit, reaching inside the handle part to flick it -      ((Timothy Pickett))
2017-09-01 22:25:32  ★ -counter-clockwise to release the two bolts inside.      ((Timothy Pickett))
2017-09-01 22:26:05  ★ Timothy Pickett reaches for a hex screwdriver, feeling along the underside to fidn the screws, using his -
2017-09-01 22:26:20  ★ -finger to guide the screwdriver into the screw and loosens the screws.      ((Timothy Pickett))
2017-09-01 22:26:33  ★ Timothy Pickett uses a long flat screwdriver again, as he reaches it between the metal of the door and -
2017-09-01 22:26:46  ★ -the door cover, as he uses it as a lever to pop the door cover out of place.      ((Timothy Pickett))
2017-09-01 22:27:07  ★ Timothy Pickett slips his fingers between the created room, as he puts his foot against the metal of the-
2017-09-01 22:27:18  ★ -door and uses the muscle power in his arms to tear the door panel off.      ((Timothy Pickett))
2017-09-01 22:29:04  ★ Timothy Pickett reaches for the door panel, pulling it off completely, as he throws it towards the rest of -
2017-09-01 22:29:06  ★ -the interior parts.      ((Timothy Pickett))
2017-09-01 22:30:19  ★ Timothy Pickett reaches inside and looks around, using the long flat screwdriver to jam it behind the -
2017-09-01 22:30:36  ★ -panelling of the rear left cover of the interior, creating enough space for his fingers to      ((Timothy Pickett))
2017-09-01 22:30:53  ★ -fit inbetween, putting his foot against the footwell, as he pulls hard, tearing the plastic      ((Timothy Pickett))
2017-09-01 22:30:57  ★ -off of the interior.      ((Timothy Pickett))
2017-09-01 22:32:46  ★ Timothy Pickett reaches for his knife pouch on his belt, extracting the knife.
2017-09-01 22:32:51  * Timothy Pickett shows everyone a Tactical Warrior Tanto Neck Knife. *
2017-09-01 22:33:12  ★ Timothy Pickett uses both hands to flip the knife open, as he cuts through the carpetting on the floor, -
2017-09-01 22:33:36  ★ -starting to pull on it forcefully, stripping it bit by bit, until the entire floor-      ((Timothy Pickett))
2017-09-01 22:34:00  ★ -is done, leaving nothing but bare metal visible on the flooring of the 240SX.      ((Timothy Pickett))
2017-09-01 22:34:27  ★ Timothy Pickett reaches for knife, picking it back up, as he cuts through the fabric of the heaven of the-
2017-09-01 22:34:41  ★ -vehicle, creating a bare gap, as he tucks the knife back in his pouch, and fiddles his -      ((Timothy Pickett))
2017-09-01 22:34:52  ★ -fingers through the hole, pulling on the fabric to tear it off the ceiling again.      ((Timothy Pickett))
2017-09-01 22:35:16  ★ Timothy Pickett proceeds to cover every bit, also breaking the brackets of the sun visors off in the process
2017-09-01 22:35:32  ★ -as he uses a screwdriver to then untwist both screws, removing the remainder of the sun -      ((Timothy Pickett))
2017-09-01 22:35:35  ★ -visor brackets.      ((Timothy Pickett))
2017-09-01 22:35:56  ★ Timothy Pickett tosses the carpetting out of the vehicle, along with the fabric from the ceiling, using his
2017-09-01 22:36:05  ★ -knife to cut away the last few parts.      ((Timothy Pickett))
2017-09-01 22:36:25  ★ Timothy Pickett steps out of the vehicle, rolling his shoulders for a moment, as he then stretches both arms
2017-09-01 22:36:37  ★ -and rotates his torso to relax his muscles, walking around the vehicle in the meantime.      ((Timothy Pickett))
2017-09-01 22:36:52  ★ Timothy Pickett tugs on the door handle of the right door, pulling it open, he reaches inside the vehicle -
2017-09-01 22:37:09  ★ -and picks up the hex screwdriver used before, again using it to release the screws on the -      ((Timothy Pickett))
2017-09-01 22:37:24  ★ -bottom of the door panel. He uses his fingers to find the hole in the screw, before t-      ((Timothy Pickett))
2017-09-01 22:37:32  ★ -twisting counter-clockwise to set it free.      ((Timothy Pickett))
2017-09-01 22:37:54  ★ Timothy Pickett reaches for the flat screwdriver, popping out the module for the window swithces, he uses -
2017-09-01 22:38:05  ★ -his finger to remove the plug from the clamp, tossing the module aside.      ((Timothy Pickett))
2017-09-01 22:38:34  ★ Timothy Pickett reaches for the flat screwdriver again. He uses it to pop the plastic cover of the
2017-09-01 22:38:51  ★ handle to close the door, before taking the prepared ratchet from before to undo the two 10      ((Timothy Pickett))
2017-09-01 22:38:56  ★ -mm bolts.      ((Timothy Pickett))
2017-09-01 22:39:11  ★ Timothy Pickett reaches for the screwdriver again, sliding it between the metal of the door and the door-
2017-09-01 22:39:26  ★ -cover, using it as a lever to slide his fingers inbetween, subsequently pulling on the -      ((Timothy Pickett))
2017-09-01 22:40:16  ★ -panel to tear it off of the door frame.      ((Timothy Pickett))
2017-09-01 22:40:32  ★ Timothy Pickett sets his foot against the metal, and pulls on the cover, pulling it off of the door-
2017-09-01 22:40:40  ★ -completely, before throwing it out of the vehicle.      ((Timothy Pickett))
2017-09-01 22:40:54  ★ Timothy Pickett picks up the flathead and proceeds to slide it between the rear-right interior panel,-
2017-09-01 22:41:18  ★ -using it as a lever again, creating enough space for four of his fingers, as he tears it -      ((Timothy Pickett))
2017-09-01 22:41:39  ★ -out of place, leaving the walls, floor and roof of the vehicle stripped down to bare metal      ((Timothy Pickett))
2017-09-01 22:41:44  ★ -as he glances around.      ((Timothy Pickett))
2017-09-01 22:42:00  ★ The rear seats, front seats, all interior covers, sun visors and ceiling fabric, along with      ((Timothy Pickett))
2017-09-01 22:42:07  ★ -the carpetting on the floor of the vehicle is now removed.      ((Timothy Pickett))
2017-09-01 22:52:57  ★ Timothy Pickett reaches inside the vehicle, and looks around, as he spots the small covers on the sides of -
2017-09-01 22:53:02  ★ -the door leading to the roof.      ((Timothy Pickett))
2017-09-01 22:53:20  ★ Timothy Pickett reaches over towards one of them, hooking his fingers behind the plastic, as he stands up an
2017-09-01 22:53:39  ★ -and position his Nikes to have grip, pulling with his arms to pop the covers off.      ((Timothy Pickett))
2017-09-01 22:53:41   [English] Timothy Pickett says: Emi.
2017-09-01 22:53:43   [English] Timothy Pickett says: Old seatbelts go?
2017-09-01 22:54:35  ★ Timothy Pickett reaches for the adjacent cover, repeating said process; get grippy stance, hook fingers -
2017-09-01 22:54:41  ★ -behind the plastic part, and pull with his arms.      ((Timothy Pickett))
2017-09-01 22:55:03  ★ Timothy Pickett sighs and reaches down, inspecting the seatbelt mount, as he grabs onto a ratchet with 21MM-
2017-09-01 22:55:22  ★ -bit, continuing to twist anti-clockwise, and releasing the bolt keeping the seatbelt in -      ((Timothy Pickett))
2017-09-01 22:55:47  ★ -it's mounts.      ((Timothy Pickett))
2017-09-01 23:05:27  ★ Timothy Pickett reaches around to the passenger side seatbelt mount, using aforementioned ratchet to release
2017-09-01 23:05:35  ★ -the bolt that holds the mount in place.      ((Timothy Pickett))
2017-09-01 23:08:14  ★ Timothy Pickett reaches for the seatbelt, reeling it back completely, before throwing it out of the vehicle.
2017-09-01 23:08:54  ★ Timothy Pickett reaches for where the rear seats used to be, proceeding to use the same ratchet, removing -
2017-09-01 23:09:04  ★ -the two seatbelts as well.      ((Timothy Pickett))
2017-09-01 23:09:24  ★ Timothy Pickett extends his hand towards the dashboard, dropping the glove compartment into an open position
2017-09-01 23:09:48  ★ -as he stands up, bent over, raising his right leg, landing his shoe on the glove box, -      ((Timothy Pickett))
2017-09-01 23:10:08  ★ -forcefully removing the shelf from the dashboard, as it lands on the bare metal flooring of      ((Timothy Pickett))
2017-09-01 23:10:10  ★ -the vehicle.      ((Timothy Pickett))
2017-09-01 23:10:28  ★ Timothy Pickett reaches inside and takes a flashlight, shining inside, as he peeks up towards the airbag.
2017-09-01 23:42:16  ★ Timothy Pickett reaches inside and shines his flashlight up, looking for the airbag mounts.
2017-09-01 23:42:33  ★ Timothy Pickett scratches his facial hair, as he proceeds to tap his fingers on his thigh whilst thinking.
2017-09-01 23:43:12  ★ Timothy Pickett reaches for a knuckle but and the ratchet with the extend parts he used for the door-
2017-09-01 23:43:37  ★ -as he breaks it down to put the knee part inbetween. He then sticks it into the dashboard-      ((Timothy Pickett))
2017-09-01 23:43:51  ★ -and turns anti-clockwise, proceeding to unhook the airbag.      ((Timothy Pickett))
2017-09-01 23:44:04  ★ Timothy Pickett reaches out of the vehicle, taking a 10MM spanner, as he walks to the front, taking the -
2017-09-01 23:44:17  ★ -spanner to the nut on the negative of the battery, as he turns anti-clockwise.      ((Timothy Pickett))
2017-09-01 23:44:29  ★ Timothy Pickett takes the negative off the battery, as he takes a rag and folds it around the -
2017-09-01 23:44:43  ★ -negative side, isolating it from making contact to the vehicle.      ((Timothy Pickett))
2017-09-01 23:44:49  ★ The power in the vehicle would now be off.      ((Timothy Pickett))
2017-09-01 23:45:50  ★ Timothy Pickett reaches back inside the vehicle, as he reaches within the dashboard, p
2017-09-01 23:46:04  ★ -and wraps his index finger and thumb around the plug of the airbag connector.      ((Timothy Pickett))
2017-09-01 23:46:17  ★ Timothy Pickett pinches the two pins locking it in place, pulling out to disconnect the airbag from the -
2017-09-01 23:46:20  ★ -power circuit.      ((Timothy Pickett))
2017-09-01 23:46:34  ★ Timothy Pickett reaches inside and pulls the airbag to the side, using the ratchet to -
2017-09-01 23:46:51  ★ -release the other screw with the 10MM bit, before extracting the airbag from the dashboard.      ((Timothy Pickett))
2017-09-01 23:47:08  ★ Timothy Pickett grabs onto the glove box compartment left on the ground, throwing it out of the vehicle.
2017-09-01 23:48:10  ★ Timothy Pickett reaches around and looks inside, as he scratches his neck, and proceeds to exit the vehicle-
2017-09-01 23:48:21  ★ -walking to the trunk, as he flips the trunk lid open, peeking inside.      ((Timothy Pickett))
2017-09-01 23:49:40  ★ Timothy Pickett peeks inside and reaches for the cover over the spare wheel, as he tugs on it and flips it -
2017-09-01 23:49:51 ★ -open. He reaches for his belt and opens the pouch, as he pulls on the handle of the knife-      ((Timothy Pickett))
2017-09-01 23:49:59  ★ -and proceeds to flip the knife open with both hands.      ((Timothy Pickett))
2017-09-01 23:50:14  ★ Timothy Pickett reaches for the fabric holding the cover in place, cutting through it with the knife, thus -
2017-09-01 23:50:29  ★ -allowing the spare wheel cover to become free. He lifts it out of the vehicle.      ((Timothy Pickett))
2017-09-01 23:50:38  ★ Timothy Pickett sets the cover alongside the walll, and proceeds to walk back to the car.
2017-09-01 23:52:11  ★ Timothy Pickett reaches back inside and twists the knob of the spare wheel lock anti-clockwise, spinning it
2017-09-01 23:52:22  ★ - walking towards the parts, gripping onto the fuel pump.      ((Emilio Moretti))
2017-09-01 23:52:27 ★ -with his fingers, to release the spare wheel, and lifts it out of the vehicle, dropping it-      ((Timothy Pickett))
2017-09-01 23:52:33  ★ -horizontally on the vehicle.      ((Timothy Pickett))
2017-09-01 23:52:53  ★ Timothy Pickett reaches for the jack and the bag of tools inhabited within the area, as he proceeds to -
2017-09-01 23:53:04  ★ -pull it out and sets it aside.      ((Timothy Pickett))
2017-09-01 23:53:14  ★ Timothy Pickett grabs onto the handle of his knife, and cuts through the fabric.
2017-09-01 23:53:32  ★ Timothy Pickett reaches for the fabric with his hands, pulling on it, using his arms to tear the carpetting
2017-09-01 23:53:48  ★ -of the truck area off the walls and ground, discarding of it outside of the vehicle.      ((Timothy Pickett))
2017-09-01 23:54:48  ★ Timothy Pickett reaches for a Philips screwdriver and proceeds to loosen the screws holding the speakers in
2017-09-01 23:55:26 ★ -place, he then reaches for a pair of pinch pliers, cutting through the wiring of the speake      ((Timothy Pickett))
2017-09-01 23:55:50 ★ -speakers, afterwards taking hold of a roll of black tape, taping each of the wires exposed-      ((Timothy Pickett))
2017-09-01 23:56:06  ★ -copper to isolate them from making contact, before taping both wires together.      ((Timothy Pickett))
2017-09-01 23:56:18  ★ Timothy Pickett reaches for the other side, picking the screwdriver back up, and twists anti-clockwise.
2017-09-01 23:56:35  ★ Timothy Pickett reaches for the speaker and lifts it out of it's mount. He'd cut the wires with a pair of-
2017-09-01 23:57:10 ★ -pinch pliers, and extends his hands for the roll of tape, proceeding to tape the wires to -      ((Timothy Pickett))
2017-09-01 23:57:16  ★ -isolate and tuck them away.      ((Timothy Pickett))
2017-09-01 23:58:00 ★ The vehicle's carpetting would be completely stripped everywhere. It's now bald as the steel      ((Timothy Pickett))
2017-09-01 23:58:21  ★ -floor of the vehicle's body is now visible.      ((Timothy Pickett))
2017-09-01 23:59:50  ★ Timothy Pickett reaches for the toolchest, as he grabs onto an electric screwdriver.
2017-09-02 00:00:02  ★ Timothy Pickett reaches inside the vehicle and turns on the steering wheel, turning the wheel to the full-
2017-09-02 00:00:17 ★ -right and proceeds to lean inside the wheel well. He uses the screwdriver to loosen the -      ((Timothy Pickett))
2017-09-02 00:00:28  ★ -screws inside the wheel well that support the bumper.      ((Timothy Pickett))
2017-09-02 00:00:38  ★ Timothy Pickett reaches for the steering wheel, turning full left, as he walks around the hood of the car.
2017-09-02 00:00:48  ★ Timothy Pickett kneels down and uses the screwdriver, aligning it with the head of the screws to loosen-
2017-09-02 00:00:56  ★ -as he also removes the bumper's support on the right side.      ((Timothy Pickett))
2017-09-02 00:01:10  ★ Timothy Pickett gets back up, taking a jack from nearby the wall, taking a rubber block, as he puts it on -t
2017-09-02 00:01:13  ★ -the metal pad.      ((Timothy Pickett))
2017-09-02 00:01:28  ★ Timothy Pickett aligns the jack's pad underneath the oil pan, as he carefully jacks it up, creating enough -
2017-09-02 00:01:41  ★ -space for his hands and arms to fit underneath the vehicle.      ((Timothy Pickett))
2017-09-02 00:01:50  ★ Timothy Pickett reaches inside the bumper, releasing the fog lights.
2017-09-02 00:03:02  ★ Timothy Pickett comes from underneath the vehicle and sets the vehicle back on it's wheels-
2017-09-02 00:03:16  ★ -proceeding to reach for the corners of the bumper, pulling on them rather firmly-      ((Timothy Pickett))
2017-09-02 00:03:21  ★ -to release it from the clips that hold it in place.      ((Timothy Pickett))
2017-09-02 00:03:38  ★ Timothy Pickett reaches around for the other side, and pulls here too, allowing the bumper's sides to hang-
2017-09-02 00:03:41  ★ -loose.      ((Timothy Pickett))
2017-09-02 00:04:01 ★ Timothy Pickett grabs onto  a ratchet and a 10MM bit, as he pushes himself up and loosens the bolts holding
2017-09-02 00:04:12  ★ -the bumper in place on the mounting point above the radiator.      ((Timothy Pickett))
2017-09-02 00:04:33  ★ Timothy Pickett reaches for the bumper, carefully lifting it off the vehicle, as he places it down over a -
2017-09-02 00:04:39  ★ -barrier to not scratch it's paint.      ((Timothy Pickett))
2017-09-02 00:09:56  ★ Timothy Pickett reaches for the impact wrench from the toolchest, clipping the 10 bar air line onto the-
2017-09-02 00:10:03  ★ -pneumatic device.      ((Timothy Pickett))
2017-09-02 00:10:25  ★ Timothy Pickett reaches for a 19 MM torque bit, as he clicks it onto the impact wrench, spinning it a couple
2017-09-02 00:10:54 ★ -times, before sliding the socket over one of four bolts holding the aluminium bumper that -      ((Timothy Pickett))
2017-09-02 00:11:05  ★ -was originally hidden behind the plastic one in place.      ((Timothy Pickett))
2017-09-02 00:11:22  ★ Timothy Pickett jerks on the trigger, having the device set to reverse makes the nuts loosen and come off -
2017-09-02 00:11:27  ★ -one by one in a matter of no-time.      ((Timothy Pickett))
2017-09-02 00:11:42  ★ Timothy Pickett reaches for the metal part, as he takes it off the vehicle and throws it on the -
2017-09-02 00:11:48  ★ -discard pile.      ((Timothy Pickett))
2017-09-02 00:12:01  ★ Timothy Pickett reaches for the bash bar packaging, taking the manual as he inspects it briefly.
2017-09-02 00:12:18  ★ Timothy Pickett throws it over his shoulder as men don't need fucking manuals to install car parts-
2017-09-02 00:12:28  ★ -and then reaches down for the part and the baggy containing the new nuts.      ((Timothy Pickett))
2017-09-02 00:12:55  ★ Timothy Pickett cuts the baggy open, making sure the nuts fit, as he lifts the part in place, and twists the
2017-09-02 00:13:06  ★ -nuts on by hand to ensure they fit onto the wire.      ((Timothy Pickett))
2017-09-02 00:13:21  ★ Timothy Pickett shoves the bash bar in place, and holds it with one hand, using his other hand to -
2017-09-02 00:13:35 ★ -grab onto the impact wrench, subsequently bolting down the bash bar onto the vehicle.      ((Timothy Pickett))
2017-09-02 00:13:51  ★ Timothy Pickett uses the socket and the impact wrench to go past all four bolts.
2017-09-02 00:14:31  ★ Timothy Pickett slides the impact wrench to the ground, as he takes a torque wrench, setting it to 11-
2017-09-02 00:14:43  ★ -110 lbs ft, as he then proceeds to slide the socket off the impact wrench and onto-      ((Timothy Pickett))
2017-09-02 00:14:47  ★ -the torque wrench.      ((Timothy Pickett))
2017-09-02 00:14:59  ★ Timothy Pickett slides the socket around the first of four bolts and presses down.
2017-09-02 00:15:00  ★ CLICK.      ((Timothy Pickett))
2017-09-02 00:15:19  ★ Timothy Pickett proceeds to slide a nut down, repeating said process; pushing down on the lever until it -
2017-09-02 00:15:22  ★ -clicks.      ((Timothy Pickett))
2017-09-02 00:15:24  ★ CLICK.      ((Timothy Pickett))
2017-09-02 00:15:29  ★ Timothy Pickett moves over to the left, the bottom one.
2017-09-02 00:15:31  ★ CLICK.      ((Timothy Pickett))
2017-09-02 00:15:44  ★ Timothy Pickett aligns the socket around the last of four bolts and pushes down on the handle.
2017-09-02 00:15:46  ★ CLICK.      ((Timothy Pickett))
2017-09-02 00:15:50   [English] Timothy Pickett says: Okay, that's the bash bar done.
2017-09-02 00:16:05  ★ Timothy Pickett reaches for hte bumper, fitting it over the bashbar, as he then reaches for the -
2017-09-02 00:16:25 ★ -right side and aligns it to the clips behind the bumper, punching his fist down onto the -      ((Timothy Pickett))
2017-09-02 00:16:32  ★ -plastic and proceeds to click the bumper into place.      ((Timothy Pickett))
2017-09-02 00:16:45  ★ Timothy Pickett walks around the vehicle and grabs the left side, aligning it, and punching it tight into -
2017-09-02 00:16:50  ★ -place with his fist.      ((Timothy Pickett))
2017-09-02 00:17:03  ★ Timothy Pickett picks up the ten millimeter ratchet, and proceeds to tighten the screws that hold the -
2017-09-02 00:17:08  ★ -bumper on the mount above the radiator.      ((Timothy Pickett))
2017-09-02 00:17:22 ★ Timothy Pickett reaches down and under the vehicle, plugging the fog lights back into the bumper, as he then
2017-09-02 00:17:31  ★ -picks up the electric screwdriver.      ((Timothy Pickett))
2017-09-02 00:17:45  ★ Timothy Pickett paces over to the wheel well, sitting down against the wheel to then screw the-
2017-09-02 00:17:54  ★ -bumper's support back using screws.      ((Timothy Pickett))
2017-09-02 00:18:13  ★ Timothy Pickett reaches for the steering wheel and twists it the other way, creating room for his screwdriver.
2017-09-02 00:18:36  ★ Timothy Pickett slides into the wheel well, aligning the screwdriver's bit to the head of the first screw, -
2017-09-02 00:18:48  ★ -clicking the trigger of the device to screw it into place, shortly followed by-      ((Timothy Pickett))
2017-09-02 00:18:53  ★ - the rest of the screws.      ((Timothy Pickett))
2017-09-02 00:23:42  ★ Timothy Pickett reaches for the steel piping of the pre-fabricated roll cage.
2017-09-02 00:24:10  ★ Timothy Pickett divides them by size and length, looking at the planner, as he then takes the drill with 8MM
2017-09-02 00:24:22  ★ -drill bit, taking the drawing along, as he marks the locations to drill holes.      ((Timothy Pickett))
2017-09-02 00:24:35  ★ Timothy Pickett takes the drill and presses it against the metal, squeezing the trigger in order to drill -
2017-09-02 00:24:45  ★ -the holes to fit the roll cage.      ((Timothy Pickett))
2017-09-02 00:24:54  ★ Timothy Pickett proceeds to go around the entire interior, preparing the holes by drilling them.
2017-09-02 00:25:04  ★ Timothy Pickett gets out of the vehicle and looks at the drawing, using his index finger to -
2017-09-02 00:25:21  ★ -guide himself within the drawing, taking the first tube, as he then carries it into the -      ((Timothy Pickett))
2017-09-02 00:25:41  ★ -and pre-fits it, nodding as he then goes outside of the vehicle to collect the impact -      ((Timothy Pickett))
2017-09-02 00:25:46  ★ -wrench and 12 mm socket bit.      ((Timothy Pickett))
2017-09-02 00:26:12  ★ Timothy Pickett reaches for the baggy of oddly shaped bolts, taking them along, as he feeds one to the socke
2017-09-02 00:26:25 ★ -socket and holds the tube in place before bolting it down onto the body of the vehicle -      ((Timothy Pickett))
2017-09-02 00:26:33  ★ -by squeezing the trigger of the impact wrench.      ((Timothy Pickett))
2017-09-02 00:26:51  ★ Timothy Pickett grabs onto the next tube and connects it to the first, taking another bolt as he spins it -
2017-09-02 00:27:02  ★ -clockwise into the body, fitting it on the vehicle.      ((Timothy Pickett))
2017-09-02 00:27:53  ★ Timothy Pickett gets out and drops on his knees, double-checking the drawing for the third tube, and carries
2017-09-02 00:28:02  ★ -it inside the vehicle, repeating the previous process:      ((Timothy Pickett))
2017-09-02 00:28:22  ★ Timothy Pickett repeats said process by joining it with the second, and then proceeds to bolt it down after
2017-09-02 00:28:29  ★ -perfecting the angle to fit it on the body.      ((Timothy Pickett))
2017-09-02 00:30:59  ★ Timothy Pickett drops down and looks at the drawing, deciding before taking the fourth tube, test-fitting it
2017-09-02 00:31:08  ★ -before finding out it's the wrong size.      ((Timothy Pickett))
2017-09-02 00:31:22  ★ Timothy Pickett gets back out of the vehicle and takes another look at the descriptive drawing.
2017-09-02 00:32:52  ★ Timothy Pickett scratches his head and takes a tape measure, as he measures the different lengths of the -
2017-09-02 00:33:03  ★ -tubes before selecting the correct fourth tube.      ((Timothy Pickett))
2017-09-02 00:33:25  ★ Timothy Pickett carries it along and fits it in place, taking a bolt as he twists it into the pre-drilled -
2017-09-02 00:33:44  ★ -hole and then proceeds to use the impact wrench to tighten it in place.      ((Timothy Pickett))
2017-09-02 00:34:03  ★ Timothy Pickett gets back out as he gets a hang of it, selecting the fifth and sixth tube, as he takes them
2017-09-02 00:34:19  ★ -along, and proceeds to fit them both in place as previously described.      ((Timothy Pickett))
2017-09-02 00:34:29  ★ Timothy Pickett twists the bolts clockwise by hand, before then sliding them in place -
2017-09-02 00:34:39  ★ -permanently using the impact wrench on full speed.      ((Timothy Pickett))
2017-09-02 00:37:15  ★ Timothy Pickett gets out of the vehicle, taking the longest tubes, as he puts them on either side past the -
2017-09-02 00:37:30  ★ -door openings, as he bolts them in place on either side of the tube.      ((Timothy Pickett))
2017-09-02 00:37:45  ★ The vehicle now has a rollcage mounted with bolts to the body.      ((Timothy Pickett))
2017-09-02 00:39:21  ★ Timothy Pickett walks to the back of the vehicle, taking the big box from around it.
2017-09-02 00:39:30  ★ Timothy Pickett walks it to the front of the vehicle, taking a pair of box cutters from the toolbox.
2017-09-02 00:39:45  ★ Timothy Pickett reaches for the tape, cutting through it with the blade of the boxcutters and folds the-
2017-09-02 00:39:50  ★ -box open in it's entirety.      ((Timothy Pickett))
2017-09-02 00:40:24  ★ Timothy Pickett reaches for the bucket seat inside of the box, setting it up-straight.
2017-09-02 00:40:38  ★ Timothy Pickett reaches for the other box behind the vehicle and brings it adjacent to the one from-
2017-09-02 00:40:46  ★ -just now, also opening that one with the box cutters.      ((Timothy Pickett))
2017-09-02 00:40:57  ★ Timothy Pickett sets the second seat up-straight, as he walsk to the back and takes the final box.
2017-09-02 00:41:12  ★ Timothy Pickett cuts through the tape with his boxcutters and folds the box open, to reach inside and with-
2017-09-02 00:41:24  ★ -draw one out of two seatbelt harnesses.      ((Timothy Pickett))
2017-09-02 00:41:34  ★ Timothy Pickett reaches for the packaging and throws the manual far, far away, as he takes the -
2017-09-02 00:41:49 ★ -both ends and brings them through the openings in the seat, before clipping it onto the -      ((Timothy Pickett))
2017-09-02 00:42:04  ★ -preperated attachment points.      ((Timothy Pickett))
2017-09-02 00:42:17  ★ Timothy Pickett reaches for the second harness and takes it out of the plastic bag, feeding it through the -
2017-09-02 00:42:24  ★ -seat and proceeds to clip it onto the seat in the same way.      ((Timothy Pickett))
2017-09-02 00:42:41  ★ Timothy Pickett reaches for the first seat and walks to the right side of the vehicle, tilting it forwards-
2017-09-02 00:42:53  ★ -to fit through the opening and clicks the front part into the rail.      ((Timothy Pickett))
2017-09-02 00:43:04  ★ Timothy Pickett reaches for the rear and pushes it into the rail with his hands.
2017-09-02 00:43:22  ★ Timothy Pickett takes a ratchet with 17 mm bit, subsequently leaning down to bolt the seat down into the -
2017-09-02 00:43:26  ★ -footwell with four bolts.      ((Timothy Pickett))
2017-09-02 00:43:41  ★ Timothy Pickett reaches for the seatbelt mounts, pulling them down to the floor, adjusting the straps of the
2017-09-02 00:43:54 ★ -harnesses and placing it flat on the ground, taking the bolt from the bag, as he switches -      ((Timothy Pickett))
2017-09-02 00:44:11  ★ -the 17 mm socket for a 13 one on his ratchet, providing a clockwise motion to the -      ((Timothy Pickett))
2017-09-02 00:44:24  ★ -ratchet to tighten the harness down onto the body, just like the seat.      ((Timothy Pickett))
2017-09-02 00:44:27   [English] Timothy Pickett says: Okidoki.
2017-09-02 00:44:41  ★ Timothy Pickett tugs on the harness to test it's strength somewhat, before stepping out of the vehicle.
2017-09-02 00:44:53  ★ Timothy Pickett reacehs for the second seat and walks around the vehicle from the other side-.
2017-09-02 00:45:10  ★ -and tilts it forwards, clippig it into the rail.      ((Timothy Pickett))
2017-09-02 00:45:26  ★ Timothy Pickett moves it forwards to squeeze himself behind it, and clicks it down into the rail on the rear
2017-09-02 00:45:34  ★ -as he looks around for his ratchet.      ((Timothy Pickett))
2017-09-02 00:45:45  ★ Timothy Pickett reaches for the ratchet and pulls the 13 mm bit off, and takes the 17 mm one.
2017-09-02 00:46:04  ★ Timothy Pickett takes the socket to the first of four bolts keeping the seat down on the footwell.
2017-09-02 00:46:21  ★ Timothy Pickett makes a clockwise motion, bolting the seat into place with four bolts.
2017-09-02 00:46:35  ★ Timothy Pickett reaches for the straps of the harnesses, leading them down to the ground, after adjusting-
2017-09-02 00:46:39  ★ -the straps twice first.      ((Timothy Pickett))
2017-09-02 00:47:57  ★ Timothy Pickett reaches for the harness straps and leads them down to the ground-
2017-09-02 00:48:18  ★ -as he swaps the socket for the 13MM one again.      ((Timothy Pickett))
2017-09-02 00:48:35  ★ Timothy Pickett twists clockwise to bolt the harnesses into place, doing so for both of the bolts.