dmesg -a

[root@freenas] /media# dmesg -a
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-STABLE #0 r+1a51513: Wed Jul 31 21:54:30 PDT 2013
    root@build.ixsystems.com:/home/alfred/fn/9.1-RELEASE/os-base/amd64/tank/home/alfred/fn/9.1-RELEASE/FreeBSD/src/sys/FREENAS.amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU           E5502  @ 1.87GHz (1866.77-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x106a5  Family = 0x6  Model = 0x1a  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4095606784 (3905 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID: 16
 cpu1 (AP): APIC ID: 20
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110527/tbfadt-638)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110527/tbfadt-638)
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
aesni0: No AESNI support.
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci12: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci13: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 Network Connection version - 2.3.9> port 0x4000-0x401f mem 0xfb9e0000-0xfb9fffff,0xfb9c0000-0xfb9dffff,0xfb9b0000-0xfb9b3fff irq 24 at device 0.0 on pci2
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:25:b3:26:f2:58
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb1: <Intel(R) PRO/1000 Network Connection version - 2.3.9> port 0x4020-0x403f mem 0xfb980000-0xfb99ffff,0xfb960000-0xfb97ffff,0xfb950000-0xfb953fff irq 34 at device 0.1 on pci2
igb1: Using MSIX interrupts with 3 vectors
igb1: Ethernet address: 00:25:b3:26:f2:59
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib4
oce0: <Emulex CNA NIC function:///4.6.95.0///> mem 0xfbcf0000-0xfbcf3fff,0xfbcc0000-0xfbcdffff,0xfbca0000-0xfbcbffff irq 30 at device 0.0 on pci3
oce0: Ethernet address: 00:00:c9:93:6d:66
oce1: <Emulex CNA NIC function:///4.6.95.0///> mem 0xfbc90000-0xfbc93fff,0xfbc60000-0xfbc7ffff,0xfbc40000-0xfbc5ffff irq 37 at device 0.1 on pci3
oce1: Ethernet address: 00:00:c9:93:6d:6a
pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci14: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci6: <ACPI PCI bus> on pcib6
ciss0: <HP Smart Array> port 0x5000-0x50ff mem 0xfbe00000-0xfbffffff,0xfbdf0000-0xfbdf0fff irq 32 at device 0.0 on pci6
ciss0: PERFORMANT Transport
pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci15: <ACPI PCI bus> on pcib7
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib8
uhci0: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfb6f0000-0xfb6f03ff irq 20 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib9
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xfb8f0000-0xfb8fffff irq 23 at device 3.0 on pci1
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1
usbus5 on uhci4
pci1: <serial bus> at device 4.6 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
qpi0: <QPI system bus> on motherboard
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr e
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr e
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
DUMMYNET 0xfffffe00027cf6c0 with IPv6 initialized (100409)
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <0x103c> at usbus5
uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ugen5.2: <HP> at usbus5
ukbd0: <Virtual Keyboard> on usbus5
kbd2 at ukbd0
ums0: <Virtual Mouse> on usbus5
ums0: 3 buttons and [XY] coordinates ID=0
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <SanDisk> at usbus4
umass0: <SanDisk Ultra, class 0/0, rev 2.00/1.26, addr 2> on usbus4
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <SanDisk Ultra 1.26> Removable Direct Access SCSI-5 device
da0: 40.000MB/s transfers
da0: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C)
da0: quirks=0x2<NO_6_BYTE>
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1866772256 Hz quality 1000
Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]...
Setting hostuuid: 37373035-3838-5532-5839-353230335a4c.
Setting hostid: 0x96a270b3.
Loading early kernel modules:
GEOM_RAID5: Module loaded, version 1.1.20110927.40 (rev 00ce00e5abb4)
/dev/ufs/FreeNASs4: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs4: clean, 39333 free (37 frags, 4912 blocks, 0.1% fragmentation)
** /dev/ufs/FreeNASs4
** Last Mounted on /data
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
10 files, 1194 used, 39333 free (37 frags, 4912 blocks, 0.1% fragmentation)

***** FILE SYSTEM IS CLEAN *****
savecore: /dev/dumpdev: No such file or directory
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/ufs/FreeNASs1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs1a: clean, 735516 free (1380 frags, 91767 blocks, 0.1% fragmentation)
/dev/ufs/FreeNASs3: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs3: clean, 2829 free (21 frags, 351 blocks, 0.7% fragmentation)
/dev/ufs/FreeNASs4: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/FreeNASs4: clean, 39333 free (37 frags, 4912 blocks, 0.1% fragmentation)
Mounting local file systems:.
Loading kernel modules:
Setting hostname: freenas.local.
Starting dhclient.
igb0: no link ... got link
DHCPDISCOVER on igb0 to 255.255.255.255 port 67 interval 8
DHCPOFFER from 10.62.0.2
DHCPREQUEST on igb0 to 255.255.255.255 port 67
DHCPACK from 10.62.0.2
bound to 10.62.0.42 -- renewal in 43200 seconds.
Starting dhclient.
igb1: no link .............. giving up
/etc/rc.d/dhclient: WARNING: failed to start dhclient
oce0: Interface Up
Starting dhclient.
oce0: Interface Up
DHCPDISCOVER on oce0 to 255.255.255.255 port 67 interval 7
DHCPOFFER from 10.62.0.2
DHCPOFFER from 10.62.0.3
DHCPREQUEST on oce0 to 255.255.255.255 port 67
DHCPACK from 10.62.0.2
bound to 10.62.0.43 -- renewal in 43200 seconds.
oce1: Interface Up
Starting dhclient.
oce1: no link .............. giving up
/etc/rc.d/dhclient: WARNING: failed to start dhclient
Starting Network: lo0 igb0 igb1 oce0 oce1 ipfw0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0xc
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
	ether 00:25:b3:26:f2:58
	inet 10.62.0.42 netmask 0xffffff00 broadcast 10.62.0.255
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=401bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
	ether 00:25:b3:26:f2:59
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect
	status: no carrier
oce0: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 1500
	options=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
	ether 00:00:c9:93:6d:66
	inet 10.62.0.43 netmask 0xffffff00 broadcast 10.62.0.255
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (10Gbase-SR <full-duplex>)
	status: active
oce1: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 1500
	options=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
	ether 00:00:c9:93:6d:6a
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect
	status: no carrier
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
dhclient already running? (pid=1158).
Starting ums0 moused.
dhclient already running? (pid=897).
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Generating host.conf.
ELF ldconfig path: /lib /usr/lib /usr/local/lib
32-bit compatibility ldconfig path:
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Creating and/or trimming log files.
Starting syslogd.
debug.ddb.textdump.pending: 0 -> 1
debug.debugger_on_panic: 1 -> 1
realpath: /dev/dumpdev: No such file or directory
/etc/rc: WARNING: Dump device does not exist.  Savecore not run.
eval: cannot open /usr/local/etc/ldpbiconfig: No such file or directory
/etc/rc: WARNING: failed precmd routine for vmware_guestd
Updating motd:.
Starting ntpd.
16+0 records in
16+0 records out
16 bytes transferred in 0.000038 secs (422068 bytes/sec)
Generating a 2048 bit RSA private key
.+++
.......................................+++
writing new private key to '/etc/ssl/freenas/CA/private/cakey.key'
-----
writing RSA key
Starting smartd.
Aug 12 12:15:18 freenas smartd[2372]: Configuration file /usr/local/etc/smartd.conf parsed but has no entries (like /dev/hda)
/etc/rc: WARNING: failed to start smartd
Performing sanity check on nginx configuration:
nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
Starting nginx.
Starting collectd.
Starting bsdstats.
Posting monthly OS statistics disabled
    set monthly_statistics_enable="YES" in /etc/periodic.conf
Configuring syscons: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting rpcbind.
Starting mountd.

Mon Aug 12 12:15:34 PDT 2013
ciss0: *** Expander Link Down, Port=51 Box=1 Exp=1 Phy=10 Port on module=11
ciss0: *** Hot-plug drive removed, Port=51 Box=1 Bay=11 SN=3PD23MRZ00009912VV5D
ciss0: *** Physical drive failure, Port=51 Box=1 Bay=11