Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ROM VER: 1.0.3
- CFG 01
- Readà
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- =======================================================================
- Wireless ADSL IAD DANUBE Loader v1.01.06 build Oct 14 2009 11:46:45
- Arcadyan Technology Corporation
- =======================================================================
- MXIC MX29LV640EB bottom boot 16-bit mode found
- Copying boot params.....DONE
- Press Space Bar 3 times to enter command mode ...
- Get Primary to 1.....
- Flash Checking Passed.
- Unzipping firmware at 0x80002000 ... with AREA[3][ZIP 3]
- [ZIP Extra] [ZIP 1] done
- Ready to run firmware
- In c_entry() function ...
- install_exception
- Co config = 80008483
- [INIT] Interrupt ...
- ##### _ftext = 0x80002000
- ##### _fdata = 0x80854C70
- ##### __bss_start = 0x808E2AB0
- ##### end = 0x8390E5E4
- allocate_memory_after_end: alloc from 839165F0 to 839A4440, length=581184
- ##### Backup Data from 0x80854C70 to 0x839165E4~0x839A4424 len 581184
- ##### Backup Data completed
- ##### Backup Data verified
- [GPIO FLOW] SetGpio() Begin ..
- [GPIO FLOW] SetGpio() End.
- [INIT] System Log Pool startup ...
- [INIT] MTinitialize ..
- [INIT] usrclk
- CPU Clock 333333334 Hz
- mips_counter_frequency:166666667
- r4k_offset: 00028b0a(166666)
- init_US_counter : time1 = 43 , time2 = 40000066, diff 40000023
- US_counter = 68
- cnt1 40669512 cnt2 40671262, diff 1750
- cnt1 41262662 cnt2 41264479, diff 1817
- Runtime code version: 1.06.000
- System startup...
- [INIT] Memory COLOR 0, 5097152 bytes ..
- [INIT] Memory COLOR 1, 6291456 bytes ..
- [INIT] Memory COLOR 2, 8809456 bytes ..
- InitCommSys: RESOURCE_BASE = 108, NUMRES = 640
- InitCommSys: EVENT_BASE = 238, NUMEVT = 818
- InitCommSys: MAILBOX_BASE = 6, NUMMBX = 64
- rzMemory start: 0x81D71784, end 0x82155894, size 4079888
- Build Day = Mar 10 2010
- >>>>set_MP_pass_Magic to 3
- MXIC MX29LV640EB bottom boot 16-bit mode found
- Set flash memory layout to Boot Parameters found !!!
- Use Flash Data as COSIC Parameters
- >>>>>>>>>>>>>>>>>> HWOption set BMC Param : ucOscTrimValLOW f1
- >>>>>>>>>>>>>>>>>> HWOption set BMC Param : g_ucOscTrimValHigh 0
- Bootcode version: v1.01.06
- Serial number: J038079190
- Hardware version: 01
- pBootParams->password 38 32 39 (20)
- Entered default password checking 8 8
- fread_config_b> sizeof(struct III_Config_t) is 551916
- MXIC MX29LV640EB bottom boot 16-bit mode found
- fread_config_b> 44997 bytes read from flash
- Decompression ratio = g
- fread_config_b> 642856 bytes decompressed successfully.
- my CFGVersionMagic = 33343536
- my CFGsize = 551936, my CFGDescSize = 39328
- my Version = 1.06.000
- My CfgHexSize:12809
- My CFGDescSize:39328
- old CFGVersionMagic on flash = 33343536
- CFGsize on flash = 551936, CFGDescSize on flash = 39328
- Version on flash = 1.06.000
- ===
- Old CfgHexSize = 12809, Old CFGDescSize = 39328
- Unzipping from 818EBA94 to 818E20E4 ... [ZIP 1] allocate_memory_after_end: alloc from 839A4440 to 839B82C0, length=81516
- [ZIP 1 49492c30] done
- Uncompressed size = 39326
- Tail1 : END_III_Config_t
- Size of Old CFG_DESC is :39326!!!
- 1.useCfgDesc:1
- Unzipping from 818DEEC0 to 818D5510 ... [ZIP 1] [ZIP 1 49492c30] done
- Uncompressed size = 39326
- 2.useCfgDesc:1
- Tail : END_III_Config_t
- useCfgDesc:3
- Restore Config file from ver: 1.06.000 !!!
- to copy from gConfig to gSetting in restore_config
- DS_Tail:[t_ARV8539PW]
- RELEASE_BUF_AND_RETURN_OK - restore_config() #13942, in danube/config.c
- - restore_config() #13943, in danube/config.c
- restore config OK. nCfgDescLen=564753.
- -----------------------> Checking SysLog in Flash OK. nLen=78103
- -----------------------> Restore SysLog from Flash 78082 bytes from 89e17
- -----------------------> Restore Call Log from Flash 15 bytes from 9cf20
- !!! Invalid wireless channel range 0 ~ 255
- !!! Use default value 1 ~ 13
- ====xxx==============================-->425@-230;600(.4/.4/1,.4/3/1)
- -->425@-230;60(.2/.2/1,.2/5/1)
- -->600(.9/4.8)
- -->600(.3/.5,.3/3)
- -->600(.9/3.9)
- check_WAN_switch returns 0
- default route: 0.0.0.0
- BufferInit:
- BUF_HDR_SZ=160 BUF_ALIGN_SZ=0 BUFFER_OFFSET=384
- BUF_BUFSZ0=544 BUF_BUFSZ1=3424
- NUM_OF_B0=0 NUM_OF_B1=3000
- BUF_POOL0_SZ=0 BUF_POOL1_SZ=10752000
- sizeof(BUFFER0)=704,sizeof(BUFFER1)=3584
- *BUF0=0x82bfc558 *BUF1=0x821bb538
- Altgn *BUF0=0x82bfc560 *BUF1=0x821bb540
- End at BUF0:0x82bfc560, BUF1:0x82bfc540
- BUF0[0]=0x82bfc560 BUF1[0]=0x821bb540
- buffer0 pointer init OK!
- buffer1 pointer init OK!
- NetJobTableInit>
- atheros_tmr_init> base_timer.expire=2147483647
- RUNTASK id=1 rapi_tmr_task ...
- [qm_lnk_init] CLOCKHZ=1000 ...
- [qm_lnk_init] add if 3 into QM link 0
- [qm_cbq_enable] no QM attached
- [qm_cbq_detach] no QM is attached at link 0
- f=18446744072906732521/100000, ns_per_byte=1090005888/100000
- New cls: id=0, bw=8080 ns/byte, maxd=0 ms,
- maxb=32, minb=2, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=0, borrow=0
- pri=0, maxidle=1, minidle=0,
- maxq=96, clsfg=17
- f=2002645667/100000, ns_per_byte=1083109375/100000
- New cls: id=1, bw=808080 ns/byte, maxd=0 ms,
- maxb=16, minb=1, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390d28c, borrow=8390d28c
- pri=5, maxidle=1, minidle=0,
- maxq=48, clsfg=21
- qm_cbq_attach(): cbqp->cbq_res=99
- f=90439747/100000, ns_per_byte=1089990048/100000
- New cls: id=2, bw=8162 ns/byte, maxd=0 ms,
- maxb=32, minb=4, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390d28c, borrow=8390d28c
- pri=5, maxidle=1, minidle=0,
- maxq=48, clsfg=21
- f=18446744073260761087/100000, ns_per_byte=1072693248/100000
- New cls: id=3, bw=799999999 ns/byte, maxd=0 ms,
- maxb=16, minb=4, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390bc8c, borrow=8390bc8c
- pri=0, maxidle=0, minidle=0,
- maxq=96, clsfg=21
- f=18446744073260761087/100000, ns_per_byte=1072693248/100000
- New cls: id=4, bw=799999999 ns/byte, maxd=0 ms,
- maxb=16, minb=4, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390bc8c, borrow=8390bc8c
- pri=1, maxidle=0, minidle=0,
- maxq=48, clsfg=23
- f=18446744073260761087/100000, ns_per_byte=1072693248/100000
- New cls: id=5, bw=799999999 ns/byte, maxd=0 ms,
- maxb=16, minb=4, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390bc8c, borrow=8390bc8c
- pri=2, maxidle=0, minidle=0,
- maxq=48, clsfg=23
- f=18446744073260761087/100000, ns_per_byte=1072693248/100000
- New cls: id=6, bw=799999999 ns/byte, maxd=0 ms,
- maxb=16, minb=4, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390bc8c, borrow=8390bc8c
- pri=3, maxidle=0, minidle=0,
- maxq=48, clsfg=23
- f=18446744073260761087/100000, ns_per_byte=1072693248/100000
- New cls: id=7, bw=799999999 ns/byte, maxd=0 ms,
- maxb=16, minb=4, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390bc8c, borrow=8390bc8c
- pri=4, maxidle=0, minidle=0,
- maxq=48, clsfg=23
- f=90439747/100000, ns_per_byte=1089990048/100000
- New cls: id=8, bw=8162 ns/byte, maxd=0 ms,
- maxb=16, minb=4, avgpktsz=0, maxpktsz=0,
- offtime=1, parent=8390bc8c, borrow=8390bc8c
- pri=6, maxidle=1, minidle=0,
- maxq=48, clsfg=20
- [qm_cbq_reset_dstcp_ctrl] dstcp_ctrl_fg=0x0, dstcp_pkt_delay=0 ms, dstcp_max_burst=6056 bytes
- CLOCKHZ=1000
- gConfig.Interface[0].IP_Addr = 127.0.0.1
- gConfig.Interface[0].Subnet_Mask = 255.255.255.255
- ***** [iput_IpLinkUp] ifno=0, link_type:12
- time = 08/01/2003, 00:00:00
- TRAP(linkUp) : send ok!
- Interface 0 ip = 127.0.0.1
- gConfig.Interface[1].IP_Addr = 192.168.2.1
- gConfig.Interface[1].Subnet_Mask = 255.255.255.0
- ether_register_vlan(1): binding not found
- ether_init(1): no tagged VLAN
- ifno=1, vlan=0, vid=1, port_mask=0xf
- DMA g_desc_list=0x818E86E0
- reset GPIO#13.
- danube_sw_chip_init: in MII mode
- init QoS for switch
- init QoS for switch
- enter athr_VLANInit
- [VLAN] port: 0x000f, ifCount=1
- ------->add port 2 to vlan 1
- ------->add port 3 to vlan 1
- ------->add port 4 to vlan 1
- ------->add port 5 to vlan 1
- mac_0_init: interface 1 registered to VLAN 1, port_mask=f
- MAC Address: 88:25:2c:80:b1:52
- ***** [iput_IpLinkUp] ifno=1, link_type:12
- time = 08/01/2003, 00:00:00
- TRAP(linkUp) : send ok!
- Interface 1 ip = 192.168.2.1
- gConfig.Interface[2].IP_Addr = 0.0.0.0
- gConfig.Interface[2].Subnet_Mask = 0.0.0.0
- ether_register_vlan(2): binding not found
- ether_init(2): no tagged VLAN
- danube pci startup...
- PCI clock 33.3MHz
- DANUBE_GPIO_P1_ALTSEL0=447
- DANUBE_GPIO_P1_ALTSEL1=0
- DANUBE_GPIO_P1_DIR=91f6
- [HWLAN] ifno=2 irno=7 port=0x00000000
- [PCI] devtag=00000070 probe=80113be0
- ##### We detect Merlin (PCI) without EEPROM #####
- [HWLAN] devtag = 00000070
- [HWLAN] Vendor ID 0x168c
- [HWLAN] Device ID 0x29
- [HWLAN] Base Addr 0xb8000000
- [HWLAN] SVendor ID 0x168c
- [HWLAN] SDevice ID 0xee1c
- [HWLAN] Revision ID 0x1
- [HWLAN] interrupt vector 0x1
- ath_pci_probe : pdev=0x818e8348
- PCI_CACHE_LINE_SIZE : 8
- after PCI_LATENCYTIMER
- pci_read_config_dword( dev_id, 0x40 ) return 32896
- ath_pci_probe : dev->name wifi0
- T_WIFI_INT=12
- dev=0x8219a7fc
- dev->priv=0x830395e8
- call ath_attach 1 : dev 8219a7fc name 8219b4a8 wifi0
- ATH_INIT_TQUEUE() : 8012276c ???
- ATH_INIT_TQUEUE() : 8012d64c ???
- ATH_INIT_TQUEUE() : 80134ae4 ???
- ATH_INIT_TQUEUE() : 8011d73c ???
- ATH_INIT_TQUEUE() : 80120dec ???
- ATH_INIT_TQUEUE() : 8012276c ???
- ATH_INIT_TQUEUE() : 8011d68c ???
- ATH_INIT_TQUEUE() : 8011da0c ???
- EEPROM : EEP_MAP_DEFAULT !!!!!
- Powertable magic: a55a
- ar5416CheckEepromDef: Read Magic = 0xA55A
- need_swap = True.
- EEPROM Endianness is not native.. Changing
- regDmn[0] 0
- regDmn[1] 1f
- change it to 1f1f
- [HWLAN] Set HWLAN MAC as LAN MAC ..
- ath_getchannels> nchan=50
- ath_getchannels> nchan=50
- ath_getchannels> nchan=50 match:9
- Chan Freq RegPwr HT CTL CTL_U CTL_L DFS
- 1 2412n 20 HT20 1 0 1 N
- 2 2417n 20 HT20 1 0 1 N
- 3 2422n 20 HT40 1 0 1 N
- 4 2427n 20 HT40 1 0 1 N
- 5 2432n 20 HT40 1 1 1 N
- 6 2437n 20 HT40 1 1 1 N
- 7 2442n 20 HT40 1 1 1 N
- 8 2447n 20 HT40 1 1 1 N
- 9 2452n 20 HT40 1 1 1 N
- 10 2457n 20 HT40 1 1 0 N
- 11 2462n 20 HT40 1 1 0 N
- 12 2467n 20 HT20 1 1 0 N
- 13 2472n 20 HT20 1 1 0 N
- 36 5180n 30 HT20 1 0 1 N
- 38 5190n 20 HT40 1 0 0 N
- 40 5200n 30 HT20 1 1 0 N
- 44 5220n 30 HT20 1 0 1 N
- 46 5230n 20 HT40 1 0 0 N
- 48 5240n 30 HT20 1 1 0 N
- 52 5260n 20 HT20 1 0 1 Y
- 54 5270n 20 HT40 1 0 0 Y
- 56 5280n 20 HT20 1 1 0 Y
- 60 5300n 20 HT20 1 0 1 Y
- 62 5310n 20 HT40 1 0 0 Y
- 64 5320n 20 HT20 1 1 0 Y
- 100 5500n 27 HT20 1 0 1 Y
- 102 5510n 27 HT40 1 0 0 Y
- 104 5520n 27 HT20 1 1 0 Y
- 108 5540n 27 HT20 1 0 1 Y
- 110 5550n 27 HT40 1 0 0 Y
- 112 5560n 27 HT20 1 1 0 Y
- 116 5580n 27 HT20 1 0 1 Y
- 118 5590n 27 HT40 1 0 0 Y
- 120 5600n 27 HT20 1 1 0 Y
- 124 5620n 27 HT20 1 0 1 Y
- 126 5630n 27 HT40 1 0 0 Y
- 128 5640n 27 HT20 1 1 0 Y
- 132 5660n 27 HT20 1 0 1 Y
- 134 5670n 27 HT40 1 0 0 Y
- 136 5680n 27 HT20 1 1 0 Y
- 140 5700n 27 HT20 1 0 0 Y
- ath_countrycode : 276
- ATH_INIT_TQUEUE() : 8011cd84 ???
- ATH_INIT_TQUEUE() : 8011cd84 ???
- ATH_INIT_TQUEUE() : 8011cd84 ???
- dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0
- DFS min filter rssiThresh = 21
- DFS max pulse dur = 131 ticks
- sc->sc_hasclrkey : 1
- ieee80211_set11gbasicrates
- wifi0: 11na rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- wifi0: 11na MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
- wifi0: mac 128.2 phy 13.0 radio 12.0
- wifi0: Use hw queue 1 for WME_AC_BE traffic
- wifi0: Use hw queue 0 for WME_AC_BK traffic
- wifi0: Use hw queue 2 for WME_AC_VI traffic
- wifi0: Use hw queue 3 for WME_AC_VO traffic
- wifi0: Use hw queue 8 for CAB traffic
- wifi0: Use hw queue 9 for beacons
- wifi0: Use hw queue 7 for UAPSD
- call ath_attach 2 : dev 8219a7fc name 8219b4a8 wifi0
- [wifi0] : Atheros 9280 : mem=0xffffffffb8000000, irq=0 hw_base=0x80000000
- [HWLAN] hwlan_init() end.
- ***** [iput_IpLinkUp] ifno=2, link_type:12
- time = 08/01/2003, 00:00:00
- TRAP(linkUp) : send ok!
- [HWLAN] hwlan_ioctl() ..
- Interface 2 ip = 192.168.2.1
- [HWLAN] hwlan_ioctl() ..
- gConfig.Interface[3].IP_Addr = 0.0.0.0
- gConfig.Interface[3].Subnet_Mask = 0.0.0.0
- ether_register_vlan(3): phy_idx=0
- ether_register_vlan(3): record vlan-id 7 in entry 0
- ether_init(3): registered to vlan 0, trunk 0
- ether_init(3): vlan_tagged=1
- ether_init(3): map to physical ifno 3
- ppe: ATM init succeeded (firmware version 1.1.0.2.1.13)
- ATM_UBR
- Init SAR ifno:3 g_atm_vcc[0] CONN:1 VPI/VCI:1/32
- MAC Address: 88:25:2c:80:b1:53
- Interface 3 ip = 0.0.0.0
- gConfig.Interface[5].IP_Addr = 0.0.0.0
- gConfig.Interface[5].Subnet_Mask = 0.0.0.0
- IFLNK_PPPOE init : (Linkp)ifno = 5 idx = 2
- IFLNK_PPPOE init : (Driverp)ifno = 5 idx = 3
- pppInit> set (PPPShutdownRequest[ifno] = 0)
- Perferred method at Start = 1
- Interface 5 ip = 0.0.0.0
- gConfig.Interface[8].IP_Addr = 0.0.0.0
- gConfig.Interface[8].Subnet_Mask = 0.0.0.0
- ether_register_vlan(8): binding not found
- ether_init(8): no tagged VLAN
- [HWLAN] ifno=8 irno=7 port=0x00000000
- ***** [iput_IpLinkUp] ifno=8, link_type:12
- time = 08/01/2003, 00:00:00
- TRAP(linkUp) : send ok!
- [HWLAN] hwlan_ioctl() ..
- Interface 8 ip = 192.168.2.1
- [HWLAN] hwlan_ioctl() ..
- gConfig.Interface[9].IP_Addr = 0.0.0.0
- gConfig.Interface[9].Subnet_Mask = 0.0.0.0
- ether_register_vlan(9): binding not found
- ether_init(9): no tagged VLAN
- [HWLAN] ifno=9 irno=7 port=0x00000000
- ***** [iput_IpLinkUp] ifno=9, link_type:12
- time = 08/01/2003, 00:00:00
- TRAP(linkUp) : send ok!
- [HWLAN] hwlan_ioctl() ..
- Interface 9 ip = 192.168.2.1
- [HWLAN] hwlan_ioctl() ..
- gConfig.Interface[10].IP_Addr = 0.0.0.0
- gConfig.Interface[10].Subnet_Mask = 0.0.0.0
- ether_register_vlan(10): binding not found
- ether_init(10): no tagged VLAN
- [HWLAN] ifno=10 irno=7 port=0x00000000
- ***** [iput_IpLinkUp] ifno=10, link_type:12
- time = 08/01/2003, 00:00:00
- TRAP(linkUp) : send ok!
- [HWLAN] hwlan_ioctl() ..
- Interface 10 ip = 192.168.2.1
- [HWLAN] hwlan_ioctl() ..
- gConfig.Interface[11].IP_Addr = 0.0.0.0
- gConfig.Interface[11].Subnet_Mask = 0.0.0.0
- ether_register_vlan(11): binding not found
- ether_init(11): no tagged VLAN
- [HWLAN] ifno=11 irno=7 port=0x00000000
- ***** [iput_IpLinkUp] ifno=11, link_type:12
- time = 08/01/2003, 00:00:00
- TRAP(linkUp) : send ok!
- [HWLAN] hwlan_ioctl() ..
- Interface 11 ip = 192.168.2.1
- [HWLAN] hwlan_ioctl() ..
- gConfig.Interface[14].IP_Addr = 0.0.0.0
- gConfig.Interface[14].Subnet_Mask = 0.0.0.0
- ether_register_vlan(14): phy_idx=0
- ether_register_vlan(14): record vlan-id 8 in entry 1
- ether_init(14): registered to vlan 1, trunk 0
- ether_init(14): vlan_tagged=1
- ether_init(14): phy already initialized
- Interface 14 ip = 0.0.0.0
- gConfig.Interface[16].IP_Addr = 0.0.0.0
- gConfig.Interface[16].Subnet_Mask = 0.0.0.0
- pppInit> set (PPPShutdownRequest[ifno] = 0)
- if_umts_init() WAN interface 16, UMTS-COM1: baudrate=115200
- RUNTASK id=3 umtsReceQueueTsk...
- RUNTASK id=4 umtsReceTsk...
- RUNTASK id=5 umtsWritTsk...
- Interface 16 ip = 0.0.0.0
- ruleCheck()> Group: 0, Error: Useless rule index will be truncated, from idx:1
- ruleCheck()> Group: 1, Error: Useless rule index will be truncated, from idx:22
- ruleCheck()> Group: 2, Error: Useless rule index will be truncated, from idx:0
- CBAC rule format check succeed !!
- reqCBACBuf()> init match pool, Have: 1000
- Memory Address: 0xffffffff838a7e14 ~ 0xffffffff838aeb90
- reqCBACBuf()> init timeGap pool, Have: 10000
- Memory Address: 0xffffffff838aeb90 ~ 0xffffffff838df8e4
- reqCBACBuf()> init sameHost pool, Have: 2000
- Memory Address: 0xffffffff838df8e4 ~ 0xffffffff838ef304
- CBAC rule pool initialized !!
- [init_if] local_if_mask=0xf07
- [init_if] local_wiredif_mask=0x2
- [init_if] local_wirelessif_mask=0xf04
- [init_if] localorVPN_if_mask=0xf07
- 1 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 2 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 3 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 5 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 8 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 9 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 10 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 11 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 14 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- 16 set_timer: ti=0 type=1 ina[00000000] gid[00000000]
- Init NAT data structure
- Low priority IF task : 0
- RUNTASK id=6 if_task if0...
- Low priority IF task : 1
- RUNTASK id=7 if_task if1...
- Low priority IF task : 2
- RUNTASK id=8 if_task if2...
- Low priority IF task : 3
- RUNTASK id=9 if_task if3...
- Low priority IF task : 8
- RUNTASK id=10 if_task if8...
- Low priority IF task : 9
- RUNTASK id=11 if_task if9...
- Low priority IF task : 10
- RUNTASK id=12 if_task if10...
- Low priority IF task : 11
- RUNTASK id=13 if_task if11...
- High priority IF task : 14
- RUNTASK id=14 if_task if14...
- High priority IF task : 16
- RUNTASK id=15 if_task if16...
- RUNTASK id=16 timer_task...
- RUNTASK id=17 conn_mgr...
- RUNTASK id=18 main_8021x...
- Build Day = Mar 10 2010
- [VFS_init] Start...
- [VFS_init] vfsState:1
- vfs_codepage_init() TimeZone:23, vfs_cp_idx:23, vfs_cp_ID:5
- fat_codePageInit() TimeZone:23, codePage:CP850, cPID:5, cpSize:256, toUpSize:30
- ntfs_codepage timezone:23, lan= 0
- ntfs_codePageInit() TimeZone:23, codePage:5
- ==[vfs_register_filesystem]============================
- list size:1, Method:0x80857eac
- 1) Type:0xfc, Name:BRN-VFS
- =================================================================
- [VFS_init] VFS ROOT FS init OK
- ==[vfs_register_filesystem]============================
- list size:7, Method:0x808580e0
- 1) Type:0x01, Name:FAT12
- 2) Type:0x04, Name:FAT16
- 3) Type:0x06, Name:FAT16
- 4) Type:0x0b, Name:FAT32
- 5) Type:0x0c, Name:FAT32
- 6) Type:0x0e, Name:FAT16
- 7) Type:0x81, Name:Minix
- =================================================================
- [VFS_init] FAT init OK
- ==[vfs_register_filesystem]============================
- list size:1, Method:0x80858318
- 1) Type:0x07, Name:NTFS/HPFS
- =================================================================
- [VFS_init] NTFS init OK
- [VFS_init]-[vfs_mount_root] Start...
- [VFS_init]-[vfs_mount_root] Init <root> OK...
- [VFS_init]-[vfs_mount_root] Init <dev> OK...
- [VFS_init]-[vfs_mount_root] Init <mnt> OK...
- [0-START]=========================================
- Node 000-[\], DIR, MountFlag:0x00
- [0-END]===========================================
- [1-START]=========================================
- Node 001-[dev], DIR, MountFlag:0x00
- [1-END]===========================================
- [1-START]=========================================
- Node 002-[mnt], DIR, MountFlag:0x00
- [1-END]===========================================
- dump_inode() freeCnt:77, usedCnt:3
- setUsbPciInfo() cpu_to_usb_addr_shift[3]:0x00000000, usb_to_cpu_addr_shift[3]:0x00000000
- usb_pci_probe() Found Synopsis OTG, baseAddr:0xbe101000
- usb_power_set() isOn:1
- usb_power_set() Previous power off:0, current time:0
- usb_power_set(2) min time delay:6000, current delay:0
- usb_hcd_init() func(0):0
- usb_hcd_init() func(1):0
- usb_hcd_init() func(2):0
- usb_hcd_init() func(3):1
- localhc_init() install otg driver(self->driver = 0x808C0994, otg_driver=0x808C0994).
- usb_hcd_init(): succ.
- RUNTASK id=21 period_task...
- RUNTASK id=22 check_mail_task...
- RUNTASK id=23 check_rss_task...
- ========== ADSL Modem initialization OK ! ======
- RUNTASK id=24 dhcp_daemon...
- RUNTASK id=25 dhcp_clt...on interface 14
- main()> usb:1, ftp:0
- Primary image: 1, flash area 3
- found signature: 78h 56h 34h 12h
- ulImgLens=2014188, LENGTH[3]-12=3932148
- length checking OK
- [0] find End at 0xFFFFFFFFB061B800 len=2014188
- found signature: 78h 56h 34h 12h
- ulImgLens=319468, LENGTH[3]-12=3932148
- length checking OK
- [1] find End at 0xFFFFFFFFB0669800 len=319468
- ---[ ZIP1 head start in 0xFFFFFFFFB0669C00 ]---
- found signature: 78h 56h 34h 12h
- ulImgLens=163864, LENGTH[3]-12=3932148
- length checking OK
- [2] find End at 0xFFFFFFFFB0691C00 len=163864
- ---[ ZIP1 head start in 0xFFFFFFFFB0692000 ]---
- found signature: 78h 56h 34h 12h
- ulImgLens=417772, LENGTH[3]-12=3932148
- length checking OK
- [3] find End at 0xFFFFFFFFB06F7C00 len=417772
- ---[ ZIP1 head start in 0xFFFFFFFFB06F8000 ]---
- found signature: 78h 56h 34h 12h
- ulImgLens=241885, LENGTH[3]-12=3932148
- length checking OK
- [4] find End at 0xFFFFFFFFB0733000 len=241885
- Image[1] at 0xB0430000, len = 2014188
- Image[2] at 0xB061BC00, len = 319468
- Image[3] at 0xB0669C00, len = 163864
- Image[4] at 0xB0692000, len = 417772
- Image[5] at 0xB06F8000, len = 241885
- unzip for U/I from 0xb061bc00 size 319468
- Unzipping from B061BC00 to 83C00000 ... [ZIP 3] [ZIP 0]
- [ZIP Extra] [ZIP 1] [ZIP 1 2f534650] done
- Uncompressed size = 2461312
- drive start addr[0]=ffffffff83c00000, [1]=ffffffff83e58e80
- httpd: listen at 192.168.2.1:80
- httpd: listen at 192.168.2.1:443
- RUNTASK httpd...
- RUNTASK id=29 SSLClient ...
- g_Client_Cert_Array=0x81a42d80
- RUNTASK id=30 dnsproxy...
- startNBIOSTask()...
- RUNTASK id=31 nbios_main...
- RUNTASK id=32 padmin_task_entry...
- RUNTASK id=33 dhcpd_mgmt_task...
- UPnP is enabled
- UPNP Device initialize success! slot=34
- TR64 init is taken care by UPnP.
- Register StorageService Successful
- [0] Allocate mailbox 6
- [0] Allocate mailbox 7
- FirstUseDate:2011-02-03T11:06:41Z
- RUNTASK id=37 wscmain...
- RUNTASK id=38 wsc_Send_eap_packet...
- RUNTASK id=39 wsc_Send_UPNP_packet...
- RUNTASK id=40 WSC_WaitUserAction_Task...
- Starting Multitask...
- run_project_task
- RUNTASK id=41 CMV_task...
- RUNTASK id=42 ds_tcp_policing...
- [0] Allocate resource 108, FreeResource = 1
- dma_device_register: no system buffer.
- call ifx_ssc_init() = 0
- call ifx_ssc_open() = 25
- SPI_Init!
- ifx_sscAllocConnection: device ISDN register sucessfully!
- ISDN ResetInit: SPI INIT first now iISDNID -2119947120 iISDNCS 0
- ifx_sscAllocConnection: device Proslic register sucessfully!
- ProDAAInitialize: SPI INIT first now ProSlicID -2119947208 ProSlicCS 2
- gptu: totally 6 16-bit timers/counters
- cgu_get_fpi_bus_clock(2) = 83250000, clock_divider = 1
- request_timer(4, 0x0000010D, 5203124)
- Init timer (4) - OK
- T_WLAN_INT=2
- gSetting.CountryCode=0x8114
- gSetting.Interface[T_WLAN_INT].Link_Type=1
- RUNTASK id=44 apAppInit...
- RUNTASK id=47 ScanMIH_task...
- --> [is_power_on_reboot] reset_status = 0x20260008
- [qm_cbq_resetclst] n_totalcls=9
- init psock cnt=8000
- xSpeedtsk priority is 80
- [HWLAN] [1] rapi_tmr_task running
- ifno2dot1x_if[2]=0
- ifno2dot1x_if[12]=81
- ifno2dot1x_if[8]=82
- ifno2dot1x_if[9]=83
- ifno2dot1x_if[10]=84
- ifno2dot1x_if[11]=85
- dot1x_wireless_if_mask=0x1f04
- [main_8021x] dot1x_build_if_mapping() completed.
- apAppInit called ????
- init rand with sys_time=29
- ath_create_vap: ifr.ifr_name = wifi0 (before ioctl)
- alloc_etherdev: name = wlan0
- GetWdsIfno: name = wlan0
- GetWdsIfno : return 2 , T_WDS_INT 8
- alloc_etherdev> dev->priv = 0x81380584 **********
- should asigned hard_start_xmit and open in dev structure ???
- ReleaseWDS_ni : cnt 0
- ath_create_vap: ifr.ifr_name = wlan0 (after ioctl)
- apAppInit: ath_create_ap, T_WLAN_INT done
- apAppInit> if_table[T_WIFI_INT]=0x0
- wlan_confree_do> start ...
- [HWLAN] gSetting.Wireless_mode=0
- Wireless Mode 0, Mixed 802.11g and 802.11b
- wlan_confree_do> start ...
- in wlan_confree_do_setmode,
- ------------------->change mode to 11NG ,OK
- wlan_confree_do> start ...
- ------------------->change nohtie to 1 ,OK
- ------------------->change pureb to 0 ,OK
- wlan_confree_do> start ...
- ath_getchannels> nchan=50
- ath_getchannels> nchan=50
- ath_getchannels> nchan=50 match:9
- ------------------->change pureb to 0 ,OK
- wlan_confree_do> start ...
- ------------------->change pureg to 0 ,OK
- wlan_confree_do> start ...
- ------------------->change puren to 0 ,OK
- wlan_confree_do> start ...
- ------------------->set mcast rate to 22 ,OK
- wlan_confree_do> start ...
- ------------------->change cwmmode to 2 ,OK
- wlan_confree_do> start ...
- ------------------->change extoffset to -1 ,OK
- wlan_confree_do> start ...
- wlan_confree_do> start ...
- set amdulimit to 50000,OK!
- wlan_confree_do> start ...
- Set essid to WLAN-80B170 , OK!
- wlan_confree_do> start ...
- Set mode to Master , OK!
- wlan_confree_do> start ...
- now in ieee80211_ioctl_siwfreq
- Set channel to 9 , OK!
- wlan_confree_do> start ...
- Set country ie to 1 , OK!
- wlan_confree_do> start ...
- Set country ie to 0 , OK!
- wlan_confree_do> start ...
- Set tx_chainmask to 3 , OK!
- wlan_confree_do> start ...
- Set rx_chainmask to 3 , OK!
- wlan_confree_do> start ...
- set hide ssid = 0, OK
- init_lx_acl>
- init_lx_acl> acl=NULL
- wlan_confree_do> start ...
- open wds function , OK
- apAppInit : ifno:2 dev->flags 00000000
- [HWLAN]: dev->open = 80195ca8, dev->name = wlan0
- [HWLAN]: dev->open = 8011db7c, dev->name = wifi0
- ar5416CheckChan: channel 2412/0x90080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 1, ext offset -1
- ANI: capability: 9
- >>>>>>>>>>>>>>>> DECT Driver: dect_drv_open() Reset COSIC DECT again...
- >>>>>>>>>>>>>>>>>>>>>>>>>>>SPI_access_wait set to on
- Wait VOIP_Init() finished...apAppInit : dev->flags 00001001
- Init_SSLServer> input listen_protocol=6, nListenPort=443
- [28] ssld_conf_init> ssl server info:
- [28] PrivateKey=
- [28] MyCertificate=
- [28] CaCertificate=
- [28] SSL_method=31
- [28] verify_mode=0
- [28] cipher_suites=ALL:@STRENGTH:!kEDH
- [28] tftp_server_ip=140.92.61.131
- [28] fn_myCerttificate=ServCert.pem
- [28] fn_privateKey=PrivKey.pem
- [28] fn_caCertificate=CaCert.pem
- [28] ssld_conf_init> ssl server info end:
- PKCS12_PBE_add>
- PKCS12_PBE_add> support RC4
- PKCS12_PBE_add> support DES
- PKCS12_PBE_add> support RC2
- [28] pCtx=0x81a40460 in ssld_conf_init
- ssld_ctx_reset_cert> this is pkcs12 type certificate
- [28] ssld_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
- [28] ssld_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!![28] ssld_conf_init> ssld_conf_init() ok
- [dhcp_clt] enable dhcp client in interface THS[14]
- [29] SSLClient> SSLClient() run
- [29] sslc_conf_init> ssl client info:
- [29] PrivateKey=
- [29] MyCertificate=
- [29] CaCertificate=
- [29] SSL_method=31
- [29] verify_mode=1
- [29] cipher_suites=ALL:@STRENGTH:!kEDH
- [29] tftp_server_ip=140.92.61.131
- [29] fn_myCerttificate=ServCert.pem
- [29] fn_privateKey=PrivKey.pem
- [29] fn_caCertificate=CaCert.pem
- [29] sslc_conf_init> ssl client info end:
- [29] sslc_conf_init> pCtx=0x81a2e9b4 in ssld_conf_init
- [29] sslc_ctx_reset_cert> re-LoadCACertificate( 3rdCA ) ok!!
- [29] sslc_ctx_reset_cert> re-LoadCACertificate( 2ndCA ) ok!!
- [29] sslc_ctx_reset_cert> re-LoadCACertificate( 1stCA ) ok!!sslc_ctx_reset_cert> this is pkcs12 type certificate
- [29] sslc_ctx_reset_cert : re-LoadServerCertAndKey() ok!!
- [29] sslc_conf_init> sslc_conf_init() ok
- [29] SSLClient> want to bind socket for client application!
- [USBLPT] Printer Initialize Fail : Plug Out !!
- padmin_task_entry() task running
- ********** upnp_main() Unsupportted UPnP root device[0]: UPnP
- upnp_main(1-0) Run-up UPnP device IGD...
- *********************************************
- Wi-Fi Simple Config Application - Intel Corp.
- Version: Build 2.01.1.DTM1.1, Mar 10 2010 11:38:05
- *********************************************
- Initializing stack...
- ---------in wsc init----------
- ----------sizeof(uint32)=4
- ----------sizeof(uint-long)=4
- ----------sizeof(uint32)=2
- WSC_WaitUserAction:wait user action:0
- ScanMIH_task> DHCP ip give: 192.168.2.100 ~ 199, range: 100
- ptp Daemon task running
- USB: wrong number of companions (1 != 0)
- [USB] dwc3884_start() DWC3884 core version:0x4F54220A, 2.20a
- [USB] dwc3884_reset() DANUBE_RCU_UBSCFG:0xBF203018, var:0x00000400
- [USB] dwc3884_reset() rstctl:0xBE101010
- [USB] dwc3884_start() intsts:0xBE101014, var:0x04008829
- lpd Daemon task running
- [USB ROOTHUB_LOOP] RUNTASK id=39 lpd_main ...
- [USB] lpd_init() End.
- printer schedule task running
- upnp_Init(0) upnpGlobalInit[1]:0
- SSDP Initialization completed...
- GenaInit : event_hook is NULL!!
- COSIC Not Ready..507
- >> Parse Service 'urn:schemas-microsoft-com:service:OSInfo:1' : TRUE
- >> Parse Service 'urn:schemas-upnp-org:service:Layer3Forwarding:1' : TRUE
- >>>>>> usbd_new_device: adding unit bus:1, addr=1, rev=0200, class=9, subclass=0, protocol=1, maxpacket=64, len=18, speed=3
- usbd_new_device() addr:1, vid:0x058b, pid:0xf001, devFlag:0x0000
- usbd_probe_and_attach(Hub)> Reopen STATIC default pipe OK
- >> Parse Service 'urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1' : TRUE
- >> Parse Service 'urn:schemas-upnp-org:service:WANEthernetLinkConfig:1' : TRUE
- >> Parse Service 'urn:schemas-upnp-org:service:WANPPPConnection:1' : TRUE
- >> Parse Service 'urn:schemas-upnp-org:service:WANIPConnection:1' : TRUE
- >> Parse Device 'urn:schemas-upnp-org:device:WANConnectionDevice:1' : TRUE
- >> Parse Device 'urn:schemas-upnp-org:device:WANDevice:1' : TRUE
- >> Parse Device 'urn:schemas-upnp-org:device:InternetGatewayDevice:1' : TRUE
- ********** upnp_main1() Record pDevRoot[1]:81a1479c
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
- >>>> UPNP init IGD device successfully ...
- upnp_main(2-0) Run-up UPnP device TR64...
- TR64DBUG::UsrTR64Cfg_Init> mapping "speedport.ip" to 192.168.2.1
- upnp_Init(0) upnpGlobalInit[2]:0
- >> Parse Service 'urn:dslforum-org:service:DeviceInfo:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:DeviceConfig:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:Layer3Forwarding:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:LANConfigSecurity:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:ManagementServer:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:Time:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:UserInterface:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:X_VoIP:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:LANHostConfigManagement:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:LANEthernetInterfaceConfig:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WLANConfiguration:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:Hosts:1' : TRUE
- >> Parse Device 'urn:dslforum-org:device:LANDevice:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WANCommonInterfaceConfig:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WANDSLInterfaceConfig:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WANEthernetInterfaceConfig:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WANDSLConnectionManagement:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WANDSLLinkConfig:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WANEthernetLinkConfig:1' : TRUE
- >> Parse Service 'urn:dslforum-org:service:WANPPPConnection:1' : TRUE
- >> Parse Device 'urn:dslforum-org:device:WANConnectionDevice:1' : TRUE
- >> Parse Device 'urn:dslforum-org:device:WANDevice:1' : TRUE
- >> Parse Device 'urn:dslforum-org:device:InternetGatewayDevice:1' : TRUE
- ********** upnp_main1() Record pDevRoot[2]:819e5960
- TR64DBUG::TR64_UPnPInit> Start:
- TR64DBUG::TR64_InitReqList> Start:
- TR64DBUG::TR64_InitReqList> End.
- TR64::TR64_UPnPInit> RUNTASK id=54 TR64_ProcessRequest...
- TR64DBUG::TR64_UPnPInit> End.
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [1]
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
- >>>> UPNP init TR64 device successfully ...
- ********** upnp_main() Unsupportted UPnP root device[3]: WPS-WCN
- upnp_main(4-0) Run-up UPnP device AV Media Server...
- usbd_probe_and_attach,probe 1!
- startExplore() usb explore task run-up, slot:0, tsk_id:56, reason:0
- usb_hc_install_interrupt() Install OTG interrupt 54
- USB Module: Version 2.0.0 build Mar 10 2010 11:33:30
- usb_explore_task() Begin ...
- COSIC Not Ready..1000
- DECT Driver started,UPLANE defined
- .[signal_1x_reset] ...
- ifx_sscAllocConnection: device dect_drv register sucessfully!
- start_kthread TASK success: PID 55 Name waitTAPI thread
- ReleaseWDS_ni : cnt 0
- wlan_confree_do> start ...
- now in ieee80211_ioctl_siwfreq
- Set channel to 0 , OK!
- ap_deauth_sta called ???
- wlan_confree_do> start ...
- wlan_confree_do> start ...
- wlan_confree_do> start ...
- wlan_confree_do> start ...
- wlan_confree_do> start ...
- wlan_confree_do> start ...
- wlan_confree_do> start ...
- [HWLAN]: dev->open = 80195ca8, dev->name = wlan0
- [HWLAN]: dev->open = 8011db7c, dev->name = wifi0
- ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 1, ext offset -1
- ANI: capability: 9
- start_kthread TASK success: PID 19 Name CosicDriver
- Initializing DECT Agent.....
- TEL_PORT_SetPhoneChannelId phoneIdx 1 channelId 255
- TEL_PORT_SetPhoneChannelId phoneIdx 2 channelId 255
- TEL_PORT_SetPhoneChannelId phoneIdx 3 channelId 255
- TEL_PORT_SetPhoneChannelId phoneIdx 4 channelId 255
- TEL_PORT_SetPhoneChannelId phoneIdx 5 channelId 255
- TEL_PORT_SetPhoneChannelId phoneIdx 6 channelId 255
- TEL_PORT_SetPhoneChannelId phoneIdx 7 channelId 255
- TEL_PORT_SetPhoneChannelId phoneIdx 8 channelId 255
- Initializing DECT Endpoint 0
- !! This Endpoint Is Not Registered !! 0
- Initializing DECT Endpoint 1
- !! This Endpoint Is Not Registered !! 1
- Initializing DECT Endpoint 2
- !! This Endpoint Is Not Registered !! 2
- Initializing DECT Endpoint 3
- !! This Endpoint Is Not Registered !! 3
- Initializing DECT Endpoint 4
- !! This Endpoint Is Not Registered !! 4
- Initializing DECT Endpoint 5
- !! This Endpoint Is Not Registered !! 5
- <DECT_TK IFX_DECT_MU_RegisterCallBks >Callbacks of MU module registerd
- ar5416CheckChan: channel 2412/0x90080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- <DECT_TK IFX_DECT_CSU_RegisterCallBks >Enter Register CallBacks.
- <DECT_TK IFX_DECT_DPSU_RegisterDataApp ><API RegisterCallBks>Entry.
- <DECT_TK IFX_DECT_DPSU_GetFreeSessionIndex ><API GetFreeSessionIndex>Successful.
- <DECT_TK IFX_DECT_DPSU_ValidateProtoID > <API ValidateProtoID>Entry.
- <DECT_TK IFX_DECT_DPSU_ValidateProtoID > <API ValidateProtoID>Successful.
- <DECT_TK IFX_DECT_USU_RegisterCallBks ><RegisterCallBks>Entry.
- <DECT_TK IFX_DECT_USU_RegisterCallBks ><RegisterCallBks>Successful.CallBacks Registered.
- [45] Allocate mailbox 8
- IFX_DECT_LAS_Init: Create task 44 for sending packets
- [45] Allocate mailbox 9
- Initializing DECT STACK.....
- Task IFX_DECT_MsgRouterFdTask id 57
- Get Dect PIN fm gSetting (0000)
- RFPI value 01 7c b5 90 c0
- >>>>>>>>>>>>>>PINCODE : (0000) g_ucOscTrimValHigh 0 g_ucOscTrimValLOW f1
- >>>>>>>>>>>>>>BMC : xInitCfg.xBMCPrams.ucRSSIFreeLevel 7
- xInitCfg.xBMCPrams.ucRSSIBusyLevel e
- xInitCfg.xBMCPrams.ucBearerChgLim f
- xInitCfg.xBMCPrams.ucDelayReg 0
- xInitCfg.xBMCPrams.ucDefaultAntenna 81
- xInitCfg.xBMCPrams.ucDRONCtrlReg 1
- xInitCfg.xBMCPrams.ucDSPFrameReset 0
- xInitCfg.xBMCPrams.ucModeCtrlReg2 0
- xInitCfg.xBMCPrams.ucClkRecovery 0
- xInitCfg.xBMCPrams.ucWOPNSF 20
- xInitCfg.xBMCPrams.ucWWSF 8
- xInitCfg.xBMCPrams.ucCRRStart 13
- xInitCfg.xBMCPrams.ucCRREnd ff
- xInitCfg.xBMCPrams.ucPLLSettleTime 8f
- xInitCfg.xBMCPrams.ucGaussianEnable 0
- xInitCfg.xBMCPrams.ucRXDSGDeact 0
- xInitCfg.xBMCPrams.ucGenModeCtrl2 4
- xInitCfg.xBMCPrams.ucHandOverEvalper a4
- xInitCfg.xBMCPrams.ucGENMUTCTRL0 0
- xInitCfg.xBMCPrams.ucGENMUTCTRL1 0
- xInitCfg.xBMCPrams.ucEXTMUTCTRL0 89
- xInitCfg.xOscTrimVal.ucOscTrimValHI 0
- xInitCfg.xOscTrimVal.ucOscTrimValLOW f1
- xInitCfg.xOscTrimVal.aucCheckSum[0] 0
- xInitCfg.xOscTrimVal.aucCheckSum[1] 0
- xInitCfg.unGaussianVal af
- Before call DECT IFX_DECT_Async_Init .tick.1384
- Calling in Async mode
- the Size of Global info is 30408 bytes
- The size of stackCfg is 332 bytes
- The size of CSUInfo is 3744 bytes
- The size of MUInfo is 336 bytes
- The size of SMSInfo is 7320 bytes
- The size of ESUInfo is 72 bytes
- The size of DPSUInfo is 24688 bytes
- The size of LAU is 72 bytes
- The PIN CODE is 0000
- U:IFX_DECT_StackEntry:
- rfpi_ptr[1 124 181 144 192]
- U:IFX_DECT_StackEntry:
- GFSK_Value=175
- U:IFX_DECT_StackEntry:
- Osc_Trim_L.=0 Osc_Trim_L=241
- U:IFX_DECT_StackEntry:
- ucRSSIFreeLevel=7 ucRSSIBusyLevel=14 ucBearerChgLim=15
- ucDelayReg=0 ucDefaultAntenna=129 ucDRONCtrlReg=1
- ucDSPFrameReset=0 ucModeCtrlReg2=0 ucClkRecovery=0
- ucWOPNSF=32 ucWWSF=8 ucCRRStart=19
- ucCRREnd=255 ucPLLSettleTime=143 ucGaussianEnable=0
- ucRXDSGDeact=0 ucGenModeCtrl2=4 ucHandOverEvalper=164
- ucGENMUTCTRL0=0 ucGENMUTCTRL1=0 ucEXTMUTCTRL0=137
- [45] Allocate mailbox 10
- <DECT-STACK>The number of Subscribers are 0
- The BMC Location is 808115bc and size is 12288
- The USR SW Location is 808067d4 and size is 44517
- <DECT_TK IFX_DECT_USU_ModemFirmwareDownload ><IFX_DECT_USU_ModemFirmwareDownload> Entry
- The BMC Location is 808115bc and size is 12288
- The UsrSoftware Location is 808067d4 and size is 44517
- DOWNLOADING COSIC FIRMWARE
- ar5416CheckChan: channel 2417/0x90080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- DECT Stack Initialized.......1492
- DECT Agent Initialized
- VOICE_DRV_Init
- Reset Duslic High begin
- COSIC Not Ready..1502
- Reset Duslic end
- IFX TAPI, version 3.7.1.5, (c) 2001-2008 Infineon Technologies AG
- [59] Allocate mailbox 11
- TAPI_init_task_queue: enter loop..11
- [45] Allocate mailbox 12
- [45] Allocate mailbox 13
- [45] Allocate mailbox 14
- [45] Allocate mailbox 15
- [45] Allocate mailbox 16
- [45] Allocate mailbox 17
- [45] Allocate mailbox 18
- [45] Allocate mailbox 19
- [45] Allocate mailbox 20
- [45] Allocate mailbox 21
- [45] Allocate mailbox 22
- [45] Allocate mailbox 23
- [45] Allocate mailbox 24
- [45] Allocate mailbox 25
- [45] Allocate mailbox 26
- [45] Allocate mailbox 27
- [45] Allocate resource 109, FreeResource = 2
- start_kthread TASK success: PID 60 Name kpi_in
- [45] Allocate resource 110, FreeResource = 3
- IFX VMMC device driver, version 1.3.0.5, (c) 2006-2008 Infineon Technologies AG
- IFX MIPS24KEc MPS driver, version 2.0.0.0, (c) 2006-2008 Infineon Technologies AG
- request_timer(3, 0x000001BE, 1)
- ifx_mps_init_structures request_irq 1 146
- ifx_mps_init_structures request_irq 2 147
- ifx_mps_init_structures request_irq 3 0 142
- ifx_mps_init_structures request_irq 3 1 143
- ifx_mps_init_structures request_irq 3 2 144
- ifx_mps_init_structures request_irq 3 3 145
- VMMC_Open : Major 122 Minor 10
- IFX_TAPI_Create_Device: ndev = 0, TapiDev 819C8EB4
- [45] Allocate resource 111, FreeResource = 4
- IFX_DECT_MsgRouterFdTask enter while Loop
- [45] Allocate resource 112, FreeResource = 5
- [45] Allocate resource 113, FreeResource = 6
- [45] Allocate resource 114, FreeResource = 7
- [45] Allocate resource 115, FreeResource = 8
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 1
- ifx_tapi_Prepare_Ch: nChannel 0
- [45] Allocate resource 116, FreeResource = 9
- [45] Allocate resource 117, FreeResource = 10
- [45] Allocate resource 118, FreeResource = 11
- [45] Allocate resource 119, FreeResource = 12
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 2
- ifx_tapi_Prepare_Ch: nChannel 1
- [45] Allocate resource 120, FreeResource = 13
- [45] Allocate resource 121, FreeResource = 14
- [45] Allocate resource 122, FreeResource = 15
- [45] Allocate resource 123, FreeResource = 16
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 3
- ifx_tapi_Prepare_Ch: nChannel 2
- [45] Allocate resource 124, FreeResource = 17
- [45] Allocate resource 125, FreeResource = 18
- [45] Allocate resource 126, FreeResource = 19
- [45] Allocate resource 127, FreeResource = 20
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 4
- ifx_tapi_Prepare_Ch: nChannel 3
- [45] Allocate resource 128, FreeResource = 21
- [45] Allocate resource 129, FreeResource = 22
- [45] Allocate resource 130, FreeResource = 23
- [45] Allocate resource 131, FreeResource = 24
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 5
- ifx_tapi_Prepare_Ch: nChannel 4
- [45] Allocate resource 132, FreeResource = 25
- [45] Allocate resource 133, FreeResource = 26
- [45] Allocate resource 134, FreeResource = 27
- [45] Allocate resource 135, FreeResource = 28
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 6
- ifx_tapi_Prepare_Ch: nChannel 5
- [45] Allocate resource 136, FreeResource = 29
- [45] Allocate resource 137, FreeResource = 30
- [45] Allocate resource 138, FreeResource = 31
- [45] Allocate resource 139, FreeResource = 32
- ar5416CheckChan: channel 2422/0xb0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 7
- ifx_tapi_Prepare_Ch: nChannel 6
- [45] Allocate resource 140, FreeResource = 33
- [45] Allocate resource 141, FreeResource = 34
- [45] Allocate resource 142, FreeResource = 35
- [45] Allocate resource 143, FreeResource = 36
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 8
- ifx_tapi_Prepare_Ch: nChannel 7
- [45] Allocate resource 144, FreeResource = 37
- [45] Allocate resource 145, FreeResource = 38
- [45] Allocate resource 146, FreeResource = 39
- [45] Allocate resource 147, FreeResource = 40
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 9
- VMMC_LL_Open, nDev 0, inode 0 mpsCh 1
- ifx_mps_open, inode 1
- VMMC_Open --> 819c8eb4
- VMMC_handle[0] : 819c8eb4
- VMMC_Open : Major 122 Minor 11
- VMMC_LL_Open, nDev 0, inode 1 mpsCh 2
- ifx_mps_open, inode 2
- VMMC_Open --> 819c6ac4
- VMMC_handle[1] : 819c6ac4
- VMMC_Open : Major 122 Minor 12
- VMMC_LL_Open, nDev 0, inode 2 mpsCh 3
- ifx_mps_open, inode 3
- VMMC_Open --> 819c6f40
- VMMC_handle[2] : 819c6f40
- VMMC_Open : Major 122 Minor 13
- VMMC_LL_Open, nDev 0, inode 3 mpsCh 4
- ifx_mps_open, inode 4
- VMMC_Open --> 819c73bc
- VMMC_handle[3] : 819c73bc
- VMMC_Open : Major 122 Minor 14
- VMMC_LL_Open, nDev 0, inode 4 mpsCh 5
- ifx_mps_open, inode 5
- VMMC_Open --> 819c7838
- VMMC_handle[4] : 819c7838
- VMMC_Open : Major 122 Minor 15
- VMMC_LL_Open, nDev 0, inode 5 mpsCh 6
- ifx_mps_open, inode 6
- VMMC_Open --> 819c7cb4
- VMMC_handle[5] : 819c7cb4
- VMMC_Open : Major 122 Minor 16
- VMMC_LL_Open, nDev 0, inode 6 mpsCh 7
- ifx_mps_open, inode 7
- VMMC_Open --> 819c8130
- VMMC_handle[6] : 819c8130
- VMMC_Open : Major 122 Minor 17
- VMMC_LL_Open, nDev 0, inode 7 mpsCh 8
- VMMC_Open --> 819c85ac
- VMMC_handle[7] : 819c85ac
- VMMC_Open : Major 122 Minor 18
- VMMC_LL_Open, nDev 0, inode 8 mpsCh 9
- VMMC_Open --> 819c8a28
- VMMC_handle[8] : 819c8a28
- ===>
- Set PCM I/F 0 VMMC_handle:819c8eb4
- ifx_mps_ioctl: FIO_MPS_DOWNLOAD...1
- Unzipping from B0692000 to 830661E4 ... [ZIP 1] [ZIP 1 a75cb796] COSIC Not Ready..2012
- ar5416CheckChan: channel 2427/0xb0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- done
- Uncompressed size = 642816
- IFX_MPS: Download firmware (size 642816 bytes)... .ActualUIThreadProc: wait q
- upnp_Init(0) upnpGlobalInit[4]:0
- >> Parse Service 'urn:schemas-upnp-org:service:ConnectionManager:1' : TRUE
- >> Parse Service 'urn:schemas-upnp-org:service:ContentDirectory:1' : TRUE
- >> Parse Service 'urn:microsoft.com:service:X_MS_MediaReceiverRegistrar:1' : TRUE
- >> Parse Device 'urn:schemas-upnp-org:device:MediaServer:1' : TRUE
- ********** upnp_main1() Record pDevRoot[4]:819a989c
- >>>>>>>>>>FRegisterDevice pDev->rootDevHeadType = [0]
- QueryCurrentConnectionIDs....
- >>>> UPNP init AV Media Server device successfully ...
- ********** upnp_main() Unsupportted UPnP root device[5]: AV Media Renderer
- ********** upnp_main() Unsupportted UPnP root device[6]: Printer
- ok!
- Version 11.0.0.1.0 up and running...
- ar5416CheckChan: channel 2432/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- COSIC Not Ready..2500
- ar5416CheckChan: channel 2437/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- ar5416CheckChan: channel 2442/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- COSIC Not Ready..3000
- .ar5416CheckChan: channel 2447/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- !!!!Timed Out Sending Frame Again no response from Modem!!!!!
- !!!!Timed Out Sending Frame Again no response from Modem!!!!!
- COSIC Not Ready..3502
- ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- ar5416CheckChan: channel 2457/0x70080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- COSIC Not Ready..4000
- .******************uuid_p:00000000-0000-0003000088252c80b156*****
- mp_deviceInfo->uuid[i]:
- 0-0-0-0-0-0-0-3-0-0-88-25-2c-80-b1-56-
- mp_deviceInfo->macAddr:88:25:2C:80:B1:56
- gSetting.dot1x.if_entry[0].enableWEP:0
- authTypeFlags is 20 ,encrTypeFlags is 8 ,m_nwKey is 7904953540194866, key len is 10
- ssid is WLAN-80B170
- ar5416CheckChan: channel 2462/0x70080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- ar5416CheckChan: channel 2467/0x50080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- COSIC Not Ready..4500
- ar5416CheckChan: channel 2472/0x50080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- COSIC Not Ready..5000
- ar5416CheckChan: channel 2452/0xf0080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 0, ext offset 0
- ANI: capability: 9
- ar5416CheckChan: channel 2412/0x90080; HT configuration meet regulatory
- ar5416CheckChan: phy mode 1, ext offset 1
- ANI: capability: 9
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 10
- >>>>>>>>>>>>>>>>>>>>>>>>> OS_GetEventNumber event number 11
- ===>
- VMMC_Ioctl: Phone 1 IFX_TAPI_LINE_TYPE ok!
- VMMC_Ioctl: Phone 1 IFXPHONE_SET_LINEFEED ok!
- Set PCM I/F 1 VMMC_handle:819c6ac4
- ===>
- VMMC_Ioctl: Phone 2 IFX_TAPI_LINE_TYPE ok!
- VMMC_Ioctl: Phone 2 IFXPHONE_SET_LINEFEED ok!
- Set PCM I/F 2 VMMC_handle:819c6f40
- ===>
- Set PCM I/F 3 VMMC_handle:819c73bc
- ===>
- Set PCM I/F 4 VMMC_handle:819c7838
- ===>
- Set PCM I/F 5 VMMC_handle:819c7cb4
- ===>
- Set PCM I/F 6 VMMC_handle:819c8130
- ===>
- Set PCM I/F 7 VMMC_handle:819c85ac
- ===>
- Set PCM I/F 8 VMMC_handle:819c8a28
- CheckWidebandCodec: 255 3
- CheckWidebandCodec: 255 3
- CheckWidebandCodec: 255 3
- .CheckWidebandCodec: 255 3
- CheckWidebandCodec: 255 3
- Setting HOOK Related Parameters 0
- Setting HOOKFLASH_TIME min 70 ms max 320 ms
- Setting HOOKON_TIME min 320 max 320
- Setting HOOK Related Parameters 1
- Setting HOOKFLASH_TIME min 70 ms max 320 ms
- Setting HOOKON_TIME min 320 max 320
- Setting HOOK Related Parameters 2
- Setting HOOK Related Parameters 3
- RUNTASK id=32 VINETIC_DRV_Task...
- [65] Allocate mailbox 28
- RUNTASK id=65 VINETIC_T38_Task...
- RUNTASK id=67 FXO_flash_task...
- RUNTASK id=66 VOICE_API_task...
- COSIC Not Ready..5500
- !!!!Timed Out Sending Frame Again no response from Modem!!!!!
- COSIC Not Ready..6000
- .Reset Duslic High begin
- Reset Duslic end
- ProDAAInitialize: begin now
- ProDAAInitialize: Line-Side Device Status ff
- Port 2 sytem-side revision ff, line-side revision 3
- init_DTMF_data: time 6316
- force_daa_offhook ch 2 onoff 1 time 6316
- ProDaaOffhook 5 2 onoff 1
- CID_Detect CH 2 onoff 0
- FXO_PolState_DTMFCID --> Disable DTMF CID
- wlan_confree_do> start ...
- mp_deviceInfo->authTypeFlags:32
- mp_deviceInfo->encrTypeFlags:8
- *******build M1 start**********
- *******build M1 end**********
- ---test--sizeof(WSC_NOTIFY_DATA) = 36
- exit StartMonitor TRANSPORT_TYPE_UPNP_DEV
- exit switch_mode
- exit wscmain
- ******* MODE: AP with built-in Registrar and UPnP Proxy *******
- *******p_header->eType:5
- LCB_MENU_AP_PROXY_REGISTRAR
- **************b_tryAgain:1
- Options:
- 0. Quit
- 1. Configure Client
- 2. Configure Client via push-button
- Enter selection: force_daa_offhook ch 2 onoff 0 time 6386
- ProDaaOffhook 5 2 onoff 0
- CID_Detect CH 2 onoff 1
- FXO_PolState_DTMFCID --> Detect Polarity Changed Enable DTMF CID
- COSIC Not Ready..6500
- COSIC Not Ready..7000
- COSIC Not Ready..7500
- COSIC Not Ready..8000
- COSIC Not Ready..8500
- COSIC Not Ready..9000
- COSIC Not Ready..9520
- COSIC Not Ready..10000
- COSIC Not Ready..10500
- COSIC Not Ready..11000
- COSIC Not Ready..11500
- COSIC Not Ready..12000
- COSIC Not Ready..12500
- COSIC Not Ready..13000
- COSIC Not Ready..13500
- COSIC Not Ready..14000
- COSIC Not Ready..14500
- COSIC Not Ready..15000
- COSIC Not Ready..15500
- COSIC Not Ready..16000
- COSIC Not Ready..16500
- COSIC Not Ready..17000
- COSIC Not Ready..17500
- COSIC Not Ready..18000
- COSIC Not Ready..18500
- cCOSIC Not Ready..19000
- COSIC Not Ready..19500
- Turn off COSIC function now...25500
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement