Advertisement
Guest User

Untitled

a guest
Aug 10th, 2016
136
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 3.33 KB | None | 0 0
  1.  
  2. /dev/sdd:
  3.  
  4. ATA device, with non-removable media
  5. Model Number: WDC WD40EFRX-68WT0N0
  6. Serial Number: NO NO SORRY!
  7. Firmware Revision: 82.00A82
  8. Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  9. Standards:
  10. Supported: 9 8 7 6 5
  11. Likely used: 9
  12. Configuration:
  13. Logical max current
  14. cylinders 16383 16383
  15. heads 16 16
  16. sectors/track 63 63
  17. --
  18. CHS current addressable sectors: 16514064
  19. LBA user addressable sectors: 268435455
  20. LBA48 user addressable sectors: 7814037168
  21. Logical Sector size: 512 bytes
  22. Physical Sector size: 4096 bytes
  23. Logical Sector-0 offset: 0 bytes
  24. device size with M = 1024*1024: 3815447 MBytes
  25. device size with M = 1000*1000: 4000787 MBytes (4000 GB)
  26. cache/buffer size = unknown
  27. Nominal Media Rotation Rate: 5400
  28. Capabilities:
  29. LBA, IORDY(can be disabled)
  30. Queue depth: 32
  31. Standby timer values: spec'd by Standard, with device specific minimum
  32. R/W multiple sector transfer: Max = 16 Current = 0
  33. DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  34. Cycle time: min=120ns recommended=120ns
  35. PIO: pio0 pio1 pio2 pio3 pio4
  36. Cycle time: no flow control=120ns IORDY flow control=120ns
  37. Commands/features:
  38. Enabled Supported:
  39. * SMART feature set
  40. Security Mode feature set
  41. * Power Management feature set
  42. * Write cache
  43. * Look-ahead
  44. * Host Protected Area feature set
  45. * WRITE_BUFFER command
  46. * READ_BUFFER command
  47. * NOP cmd
  48. * DOWNLOAD_MICROCODE
  49. Power-Up In Standby feature set
  50. * SET_FEATURES required to spinup after power up
  51. SET_MAX security extension
  52. * 48-bit Address feature set
  53. * Device Configuration Overlay feature set
  54. * Mandatory FLUSH_CACHE
  55. * FLUSH_CACHE_EXT
  56. * SMART error logging
  57. * SMART self-test
  58. Media Card Pass-Through
  59. * General Purpose Logging feature set
  60. * 64-bit World wide name
  61. * URG for READ_STREAM[_DMA]_EXT
  62. * URG for WRITE_STREAM[_DMA]_EXT
  63. * IDLE_IMMEDIATE with UNLOAD
  64. * WRITE_UNCORRECTABLE_EXT command
  65. * {READ,WRITE}_DMA_EXT_GPL commands
  66. * Segmented DOWNLOAD_MICROCODE
  67. * Gen1 signaling speed (1.5Gb/s)
  68. * Gen2 signaling speed (3.0Gb/s)
  69. * Gen3 signaling speed (6.0Gb/s)
  70. * Native Command Queueing (NCQ)
  71. * Host-initiated interface power management
  72. * Phy event counters
  73. * Idle-Unload when NCQ is active
  74. * NCQ priority information
  75. * unknown 76[15]
  76. * DMA Setup Auto-Activate optimization
  77. Device-initiated interface power management
  78. * Software settings preservation
  79. * SMART Command Transport (SCT) feature set
  80. * SCT Write Same (AC2)
  81. * SCT Error Recovery Control (AC3)
  82. * SCT Features Control (AC4)
  83. * SCT Data Tables (AC5)
  84. unknown 206[12] (vendor specific)
  85. unknown 206[13] (vendor specific)
  86. unknown 206[14] (vendor specific)
  87. Security:
  88. Master password revision code = 65534
  89. supported
  90. not enabled
  91. not locked
  92. not frozen
  93. not expired: security count
  94. supported: enhanced erase
  95. more than 508min for SECURITY ERASE UNIT. more than 508min for ENHANCED SECURITY ERASE UNIT.
  96. Logical Unit WWN Device Identifier: 50014ee25f86a0d8
  97. NAA : 5
  98. IEEE OUI : 0014ee
  99. Unique ID : 25f86a0d8
  100. Checksum: correct
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement