Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build)
- Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: INTEL SSDSA2CW120G3
- Serial Number: CVPR117202AM120LGN
- Firmware Version: 4PC10302
- User Capacity: 120 034 123 776 bytes
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Thu Jun 23 00:57:58 2011 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 249) Self-test routine in progress...
- 90% of test remaining.
- Total time to complete Offline
- data collection: ( 1) seconds.
- Offline data collection
- capabilities: (0x71) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 1) minutes.
- Conveyance self-test routine
- recommended polling time: ( 1) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 5
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0
- 4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0
- 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 61
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16
- 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
- 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 11
- 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 7246
- 226 Load-in_Time 0x0032 100 100 000 Old_age Always - 51
- 227 Torq-amp_Count 0x0032 100 100 000 Old_age Always - 0
- 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 2147489358
- 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
- 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
- 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 7246
- 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 6621
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Vendor (0x78) Completed without error 150% 61 -
- # 2 Vendor (0xf8) Completed without error 00% 61 -
- # 3 Vendor (0x44) Completed without error 10% 60 -
- Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement