API tools faq
paste
Advertisement
Guest User

OpenWRT kern.log

a guest
Jan 11th, 2015
221
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.34 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.10.34 (dani@tool) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40396) ) #10 SMP Tue Apr 29 21:47:03 CEST 2014
  2. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  3. [ 0.000000] CPU frequency is 400 MHz
  4. [ 0.000000] 64MB of RAM installed
  5. [ 0.000000] registering 38 GPIOs
  6. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  7. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-102.6
  8. [ 0.000000] bootconsole [early0] enabled
  9. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  10. [ 0.000000] board_bcm963xx: board name: HW65x
  11. [ 0.000000] Determined physical RAM map:
  12. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  13. [ 0.000000] Initrd not found or empty - disabling initrd
  14. [ 0.000000] Zone ranges:
  15. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  16. [ 0.000000] Movable zone start for each node
  17. [ 0.000000] Early memory node ranges
  18. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  19. [ 0.000000] On node 0 totalpages: 16384
  20. [ 0.000000] free_area_init_node: node 0, pgdat 802ffa00, node_mem_map 81000000
  21. [ 0.000000] Normal zone: 128 pages used for memmap
  22. [ 0.000000] Normal zone: 0 pages reserved
  23. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  24. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  25. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  26. [ 0.000000] PERCPU: Embedded 7 pages/cpu @81083000 s6592 r8192 d13888 u32768
  27. [ 0.000000] pcpu-alloc: s6592 r8192 d13888 u32768 alloc=8*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  29. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  30. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  31. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  32. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  33. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  34. [ 0.000000] Memory: 61268k/65536k available (2455k kernel code, 4268k reserved, 620k data, 248k init, 0k highmem)
  35. [ 0.000000] Hierarchical RCU implementation.
  36. [ 0.000000] NR_IRQS:256
  37. [ 0.028000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  38. [ 0.032000] pid_max: default: 32768 minimum: 301
  39. [ 0.036000] Mount-cache hash table entries: 512
  40. [ 0.044000] SMP: Booting CPU1...
  41. [ 0.048000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  42. [ 0.048000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  43. [ 0.048000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  44. [ 0.080000] Synchronize counters for CPU 1: done.
  45. [ 0.080000] SMP: CPU1 is running
  46. [ 0.084000] Brought up 2 CPUs
  47. [ 0.108000] NET: Registered protocol family 16
  48. [ 0.116000] registering PCI controller with io_map_base unset
  49. [ 0.132000] bio: create slab <bio-0> at 0
  50. [ 0.136000] PCI host bridge to bus 0000:00
  51. [ 0.140000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  52. [ 0.144000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  53. [ 0.148000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  54. [ 0.152000] pci 0000:00:01.0: [1814:3592] type 00 class 0x028000
  55. [ 0.152000] pci 0000:00:01.0: reg 10: [mem 0x30000000-0x3000ffff]
  56. [ 0.164000] pci 0000:00:01.0: PME# supported from D0
  57. [ 0.164000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  58. [ 0.164000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
  59. [ 0.168000] Switching to clocksource MIPS
  60. [ 0.176000] NET: Registered protocol family 2
  61. [ 0.184000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  62. [ 0.188000] TCP bind hash table entries: 512 (order: 0, 4096 bytes)
  63. [ 0.196000] TCP: Hash tables configured (established 512 bind 512)
  64. [ 0.204000] TCP: reno registered
  65. [ 0.204000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  66. [ 0.212000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  67. [ 0.220000] NET: Registered protocol family 1
  68. [ 0.224000] PCI: CLS 0 bytes, default 16
  69. [ 0.228000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  70. [ 0.232000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  71. [ 0.244000] msgmni has been set to 119
  72. [ 0.248000] io scheduler noop registered
  73. [ 0.252000] io scheduler deadline registered (default)
  74. [ 0.260000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
  75. [ 0.268000] console [ttyS0] enabled, bootconsole disabled
  76. [ 0.280000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  77. [ 0.288000] physmap platform flash device: 08000000 at 18000000
  78. [ 0.296000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
  79. [ 0.304000] physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0
  80. [ 0.304000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
  81. [ 0.304000] physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0
  82. [ 0.304000] Amd/Fujitsu Extended Query Table at 0x0040
  83. [ 0.312000] Amd/Fujitsu Extended Query version 1.3.
  84. [ 0.316000] number of CFI chips: 1
  85. [ 0.320000] bcm63xxpart: CFE boot tag found with version 7 and board type HW65x
  86. [ 0.328000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  87. [ 0.336000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 10ff00
  88. [ 0.340000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length 690000
  89. [ 0.348000] bcm63xxpart: Partition 3 is cal_data offset 7c0000 and length 10000
  90. [ 0.356000] bcm63xxpart: Partition 4 is nvram offset 7f0000 and length 10000
  91. [ 0.364000] bcm63xxpart: Partition 5 is linux offset 20000 and length 7a0000
  92. [ 0.372000] bcm63xxpart: Spare partition is offset 470004 and length 34fffc
  93. [ 0.380000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
  94. [ 0.384000] Creating 6 MTD partitions on "physmap-flash.0":
  95. [ 0.392000] 0x000000000000-0x000000020000 : "CFE"
  96. [ 0.400000] 0x000000020100-0x000000130000 : "kernel"
  97. [ 0.404000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  98. [ 0.420000] 0x000000130000-0x0000007c0000 : "rootfs"
  99. [ 0.428000] mtd: device 2 (rootfs) set to be root filesystem
  100. [ 0.432000] mtd: partition "rootfs_data" created automatically, ofs=0x470000, len=0x350000
  101. [ 0.440000] 0x000000470000-0x0000007c0000 : "rootfs_data"
  102. [ 0.448000] 0x0000007c0000-0x0000007d0000 : "cal_data"
  103. [ 0.456000] 0x0000007f0000-0x000000800000 : "nvram"
  104. [ 0.464000] 0x000000020000-0x0000007c0000 : "linux"
  105. [ 0.472000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  106. [ 0.520000] b53_common: found switch: BCM63xx, rev 0
  107. [ 0.524000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  108. [ 0.536000] TCP: cubic registered
  109. [ 0.540000] NET: Registered protocol family 17
  110. [ 0.544000] 8021q: 802.1Q VLAN Support v1.8
  111. [ 0.560000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  112. [ 0.572000] Freeing unused kernel memory: 248K (80312000 - 80350000)
  113. [ 2.964000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
  114. [ 2.972000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
  115. [ 2.980000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port4, 100Mbps, full-duplex
  116. [ 4.252000] usbcore: registered new interface driver usbfs
  117. [ 4.260000] usbcore: registered new interface driver hub
  118. [ 4.264000] usbcore: registered new device driver usb
  119. [ 4.276000] Button Hotplug driver version 0.4.1
  120. [ 4.356000] SCSI subsystem initialized
  121. [ 4.368000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  122. [ 4.380000] ehci-platform: EHCI generic platform driver
  123. [ 4.488000] ehci-platform ehci-platform: EHCI Host Controller
  124. [ 4.492000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  125. [ 4.500000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  126. [ 4.520000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  127. [ 4.528000] hub 1-0:1.0: USB hub found
  128. [ 4.532000] hub 1-0:1.0: 2 ports detected
  129. [ 4.540000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  130. [ 4.548000] ohci-platform ohci-platform: Generic Platform OHCI Controller
  131. [ 4.556000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
  132. [ 4.564000] ohci-platform ohci-platform: irq 13, io mem 0xb0001600
  133. [ 4.628000] hub 2-0:1.0: USB hub found
  134. [ 4.632000] hub 2-0:1.0: 2 ports detected
  135. [ 4.648000] usbcore: registered new interface driver usb-storage
  136. [ 6.352000] jffs2: notice: (262) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 29 of xref (0 dead, 19 orphan) found.
  137. [ 9.580000] NET: Registered protocol family 10
  138. [ 9.608000] NTFS driver 2.1.30 [Flags: R/O MODULE].
  139. [ 9.636000] nf_conntrack version 0.5.0 (961 buckets, 3844 max)
  140. [ 9.656000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  141. [ 9.680000] Loading modules backported from Linux version master-2014-03-31-1-0-g5c109d2
  142. [ 9.688000] Backport generated by backports.git backports-20140221-0-g8e94650
  143. [ 9.704000] ip_tables: (C) 2000-2006 Netfilter Core Team
  144. [ 9.772000] usbcore: registered new interface driver ums-alauda
  145. [ 9.780000] usbcore: registered new interface driver ums-cypress
  146. [ 9.788000] usbcore: registered new interface driver ums-datafab
  147. [ 9.800000] usbcore: registered new interface driver ums-freecom
  148. [ 9.808000] usbcore: registered new interface driver ums-isd200
  149. [ 9.816000] usbcore: registered new interface driver ums-jumpshot
  150. [ 9.828000] usbcore: registered new interface driver ums-karma
  151. [ 9.836000] usbcore: registered new interface driver ums-sddr09
  152. [ 9.848000] usbcore: registered new interface driver ums-sddr55
  153. [ 9.856000] usbcore: registered new interface driver ums-usbat
  154. [ 9.888000] xt_time: kernel timezone is -0000
  155. [ 9.928000] cfg80211: Calling CRDA to update world regulatory domain
  156. [ 9.936000] cfg80211: World regulatory domain updated:
  157. [ 9.944000] cfg80211: DFS Master region: unset
  158. [ 9.948000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  159. [ 9.956000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  160. [ 9.964000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  161. [ 9.972000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  162. [ 9.980000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  163. [ 9.992000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  164. [ 10.000000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  165. [ 10.068000] PPP generic driver version 2.4.2
  166. [ 10.076000] NET: Registered protocol family 24
  167. [ 10.116000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  168. [ 10.124000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'rt2x00.eeprom'.
  169. [ 10.136000] ieee80211 phy0: rt2800_probe_rt: Error - Invalid RT chipset 0xffff, rev ffff detected
  170. [ 10.144000] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
  171. [ 13.852000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
  172. [ 13.860000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
  173. [ 13.868000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port4, 100Mbps, full-duplex
  174. [ 17.856000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port2, 100Mbps, full-duplex
  175. [ 17.864000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port3, 100Mbps, full-duplex
  176. [ 17.872000] bcm63xx_enetsw bcm63xx_enetsw.0: link UP on port4, 100Mbps, full-duplex
  177. [ 17.884000] device eth0.1 entered promiscuous mode
  178. [ 17.888000] device eth0 entered promiscuous mode
  179. [ 17.900000] br-lan: port 1(eth0.1) entered forwarding state
  180. [ 17.904000] br-lan: port 1(eth0.1) entered forwarding state
  181. [ 18.848000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  182. [ 19.908000] br-lan: port 1(eth0.1) entered forwarding state
  183. [ 6816.008000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!