API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 16th, 2013
137
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 48.19 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.0.31-CM (shaaan@shaaan-work) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 16 18:53:07 IST 2013
  2. [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d
  3. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  4. [ 0.000000] Machine: SAMSUNG JANICE
  5. [ 0.000000] Only cachepolicy=writeback supported on ARMv6 and later
  6. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  7. [ 0.000000] DB8500 v2.2 [0x008500b2]
  8. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1d34000 s7936 r8192 d12544 u32768
  9. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 164610
  10. [ 0.000000] Kernel command line: cachepolicy=writealloc mpcore_wdt.mpcore_margin=359 root=/dev/ram0 rw rootwait crash_reboot=yes crash_dump=no init=init console='null' mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M mem_modem=16M@112M mem=128M@128M hwmem=84M@256M mem=43M@340M mem_issw=1M@383M mem_ram_console=1M@384M mem=382M@385M vmalloc=264M jig_smd=0 lpm_boot=0 checksum_pass=1 checksum_done=1 sec_debug.enable=0 sec_debug.enable_user=0 androidboot.serialno=479031110d682f74 board_id=13 startup_graphics=1 logo. lcdtype=7 sbl_copy=1
  11. [ 0.000000] JANICE Board Rev 0.6
  12. [ 0.000000] Startup graphics support
  13. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  14. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  15. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. [ 0.000000] Memory: 96MB 128MB 43MB 382MB = 649MB total
  17. [ 0.000000] Memory: 635096k/635096k available, 29480k reserved, 146432K highmem
  18. [ 0.000000] Virtual kernel memory layout:
  19. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  20. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  21. [ 0.000000] DMA : 0xfee00000 - 0xffe00000 ( 16 MB)
  22. [ 0.000000] vmalloc : 0xe7800000 - 0xf7800000 ( 256 MB)
  23. [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  24. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  25. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  26. [ 0.000000] .init : 0xc0008000 - 0xc045b000 (4428 kB)
  27. [ 0.000000] .text : 0xc045b000 - 0xc0ce243c (8734 kB)
  28. [ 0.000000] .data : 0xc0ce4000 - 0xc0d6e2bc ( 553 kB)
  29. [ 0.000000] .bss : 0xc0d6e2e0 - 0xc172b760 (9974 kB)
  30. [ 0.000000] Preemptible hierarchical RCU implementation.
  31. [ 0.000000] NR_IRQS:840
  32. [ 0.000000] PRCMU firmware: U8500 MBL(11), version 3.6.8
  33. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  34. [ 0.000000] Console: colour dummy device 80x30
  35. [ 0.149993] Calibrating delay using timer specific routine.. 4.80 BogoMIPS (lpj=24019)
  36. [ 0.150024] pid_max: default: 32768 minimum: 301
  37. [ 0.150329] Mount-cache hash table entries: 512
  38. [ 0.151092] Initializing cgroup subsys cpuacct
  39. [ 0.151214] [LOG] start_kernel() log_buf_base = 0xe7a00000, size=149946368
  40. [ 0.151245] CPU: Testing write buffer coherency: ok
  41. [ 0.151275] ftrace: allocating 21741 entries in 64 pages
  42. [ 0.170898] CPU0: thread -1, cpu 0, socket 3, mpidr 80000300
  43. [ 0.170989] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  44. [ 0.171081] L310 cache controller enabled
  45. [ 0.171081] l2x0: 8 ways, CACHE_ID 0x410000c5, AUX_CTRL 0x7ec60800, Cache size: 524288 B
  46. [ 0.291381] CPU1: Booted secondary processor
  47. [ 0.291381] CPU1: thread -1, cpu 1, socket 3, mpidr 80000301
  48. [ 0.310974] Brought up 2 CPUs
  49. [ 0.311004] SMP: Total of 2 processors activated (9.60 BogoMIPS).
  50. [ 0.316650] print_constraints: dummy:
  51. [ 0.316925] NET: Registered protocol family 16
  52. [ 0.319244] ram_console: got buffer at 18000000, size 100000
  53. [ 0.319305] ram_console: found existing buffer, size 63212, start 63212
  54. [ 0.319824] console [ram-1] enabled
  55. [ 0.321289] gpio gpio.0: Bits 0-31 at address f812e000
  56. [ 0.321716] gpio gpio.1: Bits 32-63 at address f812e080
  57. [ 0.322296] gpio gpio.2: Bits 64-95 at address f800e000
  58. [ 0.322662] gpio gpio.3: Bits 96-127 at address f800e080
  59. [ 0.323211] gpio gpio.4: Bits 128-159 at address f800e100
  60. [ 0.323669] gpio gpio.5: Bits 160-191 at address f800e180
  61. [ 0.324218] gpio gpio.6: Bits 192-223 at address f811e000
  62. [ 0.324615] gpio gpio.7: Bits 224-255 at address f811e080
  63. [ 0.325103] gpio gpio.8: Bits 256-287 at address fa3fe000
  64. [ 0.329132] janice_i2c_init
  65. [ 0.332092] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  66. [ 0.332122] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  67. [ 0.332153] hw-breakpoint: maximum watchpoint size is 4 bytes.
  68. [ 0.332244] dbx500_dump: driver initialized
  69. [ 0.334320] print_constraints: db8500-vape:
  70. [ 0.334564] print_constraints: db8500-varm:
  71. [ 0.334777] print_constraints: db8500-vmodem:
  72. [ 0.334991] print_constraints: db8500-vpll:
  73. [ 0.335205] print_constraints: db8500-vsmps1:
  74. [ 0.335418] print_constraints: db8500-vsmps2:
  75. [ 0.335632] print_constraints: db8500-vsmps3:
  76. [ 0.335815] print_constraints: db8500-vrf1:
  77. [ 0.336029] print_constraints: db8500-sva-mmdsp:
  78. [ 0.336242] print_constraints: db8500-sva-mmdsp-ret:
  79. [ 0.336456] print_constraints: db8500-sva-pipe:
  80. [ 0.336669] print_constraints: db8500-sia-mmdsp:
  81. [ 0.336883] print_constraints: db8500-sia-mmdsp-ret:
  82. [ 0.337066] print_constraints: db8500-sia-pipe:
  83. [ 0.337310] print_constraints: db8500-sga:
  84. [ 0.337310] set_supply: db8500-sga: supplied by db8500-vape
  85. [ 0.337524] print_constraints: db8500-b2r2-mcde:
  86. [ 0.337554] set_supply: db8500-b2r2-mcde: supplied by db8500-vape
  87. [ 0.337768] print_constraints: db8500-esram12:
  88. [ 0.337982] print_constraints: db8500-esram12-ret:
  89. [ 0.338195] print_constraints: db8500-esram34:
  90. [ 0.338409] print_constraints: db8500-esram34-ret:
  91. [ 0.339050] DB8500 PRCMU initialized
  92. [ 0.339630] ab8500-i2c ab8500-i2c.0: detected chip, AB8500 rev. 3.3
  93. [ 0.339691] ab8500-i2c ab8500-i2c.0: switch off reason(s) (0x8): "Watchdog expired"
  94. [ 0.345550] hwmem: hwmem_cona map to LOMEM, start: 0xd0000000, end: 0xd5400000
  95. [ 0.371246] bio: create slab <bio-0> at 0
  96. [ 0.371887] dma40 dma40.0: managed by runtime pm: regulator
  97. [ 0.371948] dma40 dma40.0: hardware revision: 3 @ 0x801c0000
  98. [ 0.372039] dma40 dma40.0: 6 of 8 physical DMA channels available
  99. [ 0.372039] dma40 dma40.0: [d40_phy_res_init] INFO: channel 4 is misconfigured (0)
  100. [ 0.372070] dma40 dma40.0: [d40_phy_res_init] INFO: channel 5 is misconfigured (0)
  101. [ 0.372070] dma40 dma40.0: [d40_phy_res_init] INFO: channel 6 is misconfigured (0)
  102. [ 0.383270] dma40 dma40.0: initialized
  103. [ 0.386749] print_constraints: ab8500-ext-supply1: 1800 mV
  104. [ 0.387023] print_constraints: ab8500-ext-supply2: 1360 mV
  105. [ 0.387298] print_constraints: ab8500-ext-supply3: 3400 mV
  106. [ 0.387573] print_constraints: V-SENSORS-VDD: at 3000 mV normal idle
  107. [ 0.387847] print_constraints: V-SENSORS-VIO: at 1800 mV normal idle
  108. [ 0.388122] print_constraints: V-MMC-SD: 1200 <--> 2910 mV at 2910 mV normal idle
  109. [ 0.388397] print_constraints: V-INTCORE: 1250 <--> 1350 mV at 1250 mV normal idle
  110. [ 0.388671] print_constraints: V-TVOUT: 2000 mV
  111. [ 0.388916] print_constraints: V-AUD: 2000 mV
  112. [ 0.389129] print_constraints: V-AMIC1: 2050 mV
  113. [ 0.389343] print_constraints: V-AMIC2: 2050 mV
  114. [ 0.389587] print_constraints: V-DMIC: 1800 mV
  115. [ 0.389801] print_constraints: V-CSI_DSI: 1200 mV
  116. [ 0.390014] print_constraints: V-SYSCLKREQ-2: 0 mV
  117. [ 0.390228] print_constraints: V-SYSCLKREQ-4: 0 mV
  118. [ 0.390441] Serial: AMBA PL011 UART driver
  119. [ 0.390502] uart-pl011 uart0: managed by runtime pm: pins
  120. [ 0.390686] uart0: ttyAMA0 at MMIO 0x80120000 (irq = 43) is a PL011 rev3
  121. [ 0.411163] uart1: ttyAMA1 at MMIO 0x80121000 (irq = 51) is a PL011 rev3
  122. [ 0.441101] uart2: ttyAMA2 at MMIO 0x80007000 (irq = 58) is a PL011 rev3
  123. [ 0.471435] ab8500-pwm ab8500-pwm.1: no pwm platform data supplied
  124. [ 0.471466] ab8500-pwm: probe of ab8500-pwm.1 failed with error -22
  125. [ 0.471862] hwmem hwmem.0: Probed OK
  126. [ 0.472229] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq1RfClkBuf: -22
  127. [ 0.472229] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq2RfClkBuf: -22
  128. [ 0.472259] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq3RfClkBuf: -22
  129. [ 0.472259] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq4RfClkBuf: -22
  130. [ 0.472290] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq5RfClkBuf: -22
  131. [ 0.472290] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq6RfClkBuf: -22
  132. [ 0.472320] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq7RfClkBuf: -22
  133. [ 0.472320] ab8500-sysctrl ab8500-sysctrl.0: unable to set sysClkReq8RfClkBuf: -22
  134. [ 0.473419] SCSI subsystem initialized
  135. [ 0.474090] usbcore: registered new interface driver usbfs
  136. [ 0.474365] usbcore: registered new interface driver hub
  137. [ 0.474548] usbcore: registered new device driver usb
  138. [ 0.474609] musb-ux500 musb-ux500.0: managed by runtime pm: pins
  139. [ 0.476104] ab8500-usb ab8500-usb.0: revision 0x33 driver initialized
  140. [ 0.477905] i2c-gpio i2c-gpio.4: using pins 144 (SDA) and 143 (SCL)
  141. [ 0.478271] i2c-gpio i2c-gpio.5: using pins 197 (SDA) and 196 (SCL)
  142. [ 0.478607] i2c-gpio i2c-gpio.6: using pins 202 (SDA) and 201 (SCL)
  143. [ 0.478790] i2c-gpio i2c-gpio.7: using pins 152 (SDA) and 151 (SCL)
  144. [ 0.479156] i2c-gpio i2c-gpio.8: using pins 10 (SDA) and 11 (SCL)
  145. [ 0.479370] nmk-i2c nmk-i2c.0: managed by runtime pm: pins
  146. [ 0.479492] nmk-i2c nmk-i2c.0: initialize Nomadik I2C0 at 80004000 on virtual base e7852000
  147. [ 0.479858] nmk-i2c nmk-i2c.1: managed by runtime pm: pins
  148. [ 0.479919] nmk-i2c nmk-i2c.1: initialize Nomadik I2C1 at 80122000 on virtual base e7854000
  149. [ 0.480285] nmk-i2c nmk-i2c.2: managed by runtime pm: pins
  150. [ 0.480346] nmk-i2c nmk-i2c.2: initialize Nomadik I2C2 at 80128000 on virtual base e7856000
  151. [ 0.480560] nmk-i2c nmk-i2c.3: managed by runtime pm: pins
  152. [ 0.480621] nmk-i2c nmk-i2c.3: initialize Nomadik I2C3 at 80110000 on virtual base e7858000
  153. [ 0.481872] [SENSORS CORE] sensors_class_init
  154. [ 0.482421] exitering ab8500_get_startup_reason found name POWER_ON_KEY_1
  155. [ 0.482452]
  156. [ 0.482910] Advanced Linux Sound Architecture Driver Version 1.0.24.
  157. [ 0.483825] Bluetooth: Core ver 2.16
  158. [ 0.484008] NET: Registered protocol family 31
  159. [ 0.484008] Bluetooth: HCI device and connection manager initialized
  160. [ 0.484039] Bluetooth: HCI socket layer initialized
  161. [ 0.484039] Bluetooth: L2CAP socket layer initialized
  162. [ 0.484069] Bluetooth: SCO socket layer initialized
  163. [ 0.484558] cfg80211: Calling CRDA to update world regulatory domain
  164. [ 0.505340] ab8500-btemp ab8500-btemp.0: Battery detected on BATTEMP low 0 < res 1818 < high: 10200 index: 1
  165. [ 0.507965] ab8500_btemp_measure_temp: vntc(159), rntc(22285), temp(42)
  166. [ 0.510284] ab8500-btemp ab8500-btemp.0: Battery detected on BATTEMP low 0 < res 1678 < high: 10200 index: 1
  167. [ 0.511810] brcm_init_wlan_mem: WIFI MEM Allocated
  168. [ 0.512207] ab8500_btemp_measure_temp: vntc(160), rntc(22439), temp(42)
  169. [ 0.512237] Switching to clocksource dbx500-prcmu-timer
  170. [ 0.521026] Switched to NOHz mode on CPU #0
  171. [ 0.521453] Switched to NOHz mode on CPU #1
  172. [ 0.522064] MCDE subsystem init begin
  173. [ 0.522216] mcde mcde: MCDE iomap: 0xA0350000->0xE785A000
  174. [ 0.522399] mcde mcde: Probe HW
  175. [ 0.522430] mcde mcde: MCDE HW revision 0x03000800
  176. [ 0.522430] mcde mcde: db8500 V2 HW
  177. [ 0.523010] mcde mcde: MCDE_CLK is 159744000 Hz
  178. [ 0.524169] MCDE subsystem init done
  179. [ 0.537322] musb-hdrc: version 6.0, ux500-dma, otg (peripheral+host)
  180. [ 0.537719] dma dma0chan0: allocated logical channel (phy 4)
  181. [ 0.537750] dma dma0chan1: allocated logical channel (phy 4)
  182. [ 0.537750] dma dma0chan2: allocated logical channel (phy 4)
  183. [ 0.537780] dma dma0chan3: allocated logical channel (phy 3)
  184. [ 0.537780] dma dma0chan4: allocated logical channel (phy 3)
  185. [ 0.537811] dma dma0chan5: allocated logical channel (phy 3)
  186. [ 0.537811] dma dma0chan6: allocated logical channel (phy 3)
  187. [ 0.537841] dma dma0chan7: allocated logical channel (phy 4)
  188. [ 0.537872] dma dma0chan8: allocated logical channel (phy 5)
  189. [ 0.537872] dma dma0chan9: allocated logical channel (phy 5)
  190. [ 0.537902] dma dma0chan10: allocated logical channel (phy 5)
  191. [ 0.537902] dma dma0chan11: allocated logical channel (phy 3)
  192. [ 0.537933] dma dma0chan12: allocated logical channel (phy 3)
  193. [ 0.537933] dma dma0chan13: allocated logical channel (phy 3)
  194. [ 0.537963] dma dma0chan14: allocated logical channel (phy 3)
  195. [ 0.537963] dma dma0chan15: allocated logical channel (phy 5)
  196. [ 0.538208] musb-hdrc musb-hdrc: USB OTG mode controller at e7860000 using DMA, IRQ 55
  197. [ 0.538665] NET: Registered protocol family 2
  198. [ 0.538940] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  199. [ 0.539703] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  200. [ 0.540496] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  201. [ 0.541381] TCP: Hash tables configured (established 65536 bind 65536)
  202. [ 0.541381] TCP reno registered
  203. [ 0.541412] UDP hash table entries: 256 (order: 1, 8192 bytes)
  204. [ 0.541412] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  205. [ 0.541870] NET: Registered protocol family 1
  206. [ 0.558898] PMU: registered new PMU device of type 0
  207. [ 0.561157] ux500-product: u8500C detected
  208. [ 0.561187] ux500-product: JTAG is enabled
  209. [ 0.561340] hw observer intialized
  210. [ 0.562072] [BT] Bluetooth Power On.
  211. [ 0.642547] [BT] Bluetooth Power Off.
  212. [ 0.653747] highmem bounce pool size: 64 pages
  213. [ 0.654144] ashmem: initialized
  214. [ 0.655426] fuse init (API version 7.16)
  215. [ 0.655700] Installing v9fs 9p2000 file system support
  216. [ 0.655761] msgmni has been set to 954
  217. [ 0.657073] io scheduler noop registered
  218. [ 0.657073] io scheduler deadline registered
  219. [ 0.657135] io scheduler cfq registered (default)
  220. [ 0.657958] ------------[ cut here ]------------
  221. [ 0.657989] WARNING: at /home/shaaan/android/system/kernel/samsung/u8500/fs/sysfs/dir.c:457 sysfs_add_one+0x94/0xb4()
  222. [ 0.657989] sysfs: cannot create duplicate filename '/devices/pri_lcd_s6e63m0.0/lcd/panel/lcd_power'
  223. [ 0.658020] Modules linked in:
  224. [ 0.658050] [<c0469e40>] (unwind_backtrace+0x0/0x144) from [<c0a47980>] (dump_stack+0x20/0x24)
  225. [ 0.658081] [<c0a47980>] (dump_stack+0x20/0x24) from [<c049c1c0>] (warn_slowpath_common+0x5c/0x74)
  226. [ 0.658111] [<c049c1c0>] (warn_slowpath_common+0x5c/0x74) from [<c049c294>] (warn_slowpath_fmt+0x40/0x48)
  227. [ 0.658142] [<c049c294>] (warn_slowpath_fmt+0x40/0x48) from [<c05b5e8c>] (sysfs_add_one+0x94/0xb4)
  228. [ 0.658142] [<c05b5e8c>] (sysfs_add_one+0x94/0xb4) from [<c05b4e40>] (sysfs_add_file_mode+0x5c/0xac)
  229. [ 0.658172] [<c05b4e40>] (sysfs_add_file_mode+0x5c/0xac) from [<c05b4eac>] (sysfs_add_file+0x1c/0x20)
  230. [ 0.658203] [<c05b4eac>] (sysfs_add_file+0x1c/0x20) from [<c05b4fac>] (sysfs_create_file+0x34/0x48)
  231. [ 0.658233] [<c05b4fac>] (sysfs_create_file+0x34/0x48) from [<c0714e2c>] (device_create_file+0x24/0x28)
  232. [ 0.658264] [<c0714e2c>] (device_create_file+0x24/0x28) from [<c0a388d4>] (s6e63m0_mcde_panel_probe+0x1f4/0x3f0)
  233. [ 0.658294] [<c0a388d4>] (s6e63m0_mcde_panel_probe+0x1f4/0x3f0) from [<c06a1804>] (mcde_drv_probe+0x20/0x24)
  234. [ 0.658294] [<c06a1804>] (mcde_drv_probe+0x20/0x24) from [<c071814c>] (driver_probe_device+0xc0/0x2a0)
  235. [ 0.658325] [<c071814c>] (driver_probe_device+0xc0/0x2a0) from [<c07183c8>] (__driver_attach+0x9c/0xa0)
  236. [ 0.658355] [<c07183c8>] (__driver_attach+0x9c/0xa0) from [<c0717028>] (bus_for_each_dev+0x6c/0x98)
  237. [ 0.658386] [<c0717028>] (bus_for_each_dev+0x6c/0x98) from [<c0717d24>] (driver_attach+0x2c/0x30)
  238. [ 0.658386] [<c0717d24>] (driver_attach+0x2c/0x30) from [<c0717968>] (bus_add_driver+0x198/0x278)
  239. [ 0.658416] [<c0717968>] (bus_add_driver+0x198/0x278) from [<c0718940>] (driver_register+0x88/0x14c)
  240. [ 0.658447] [<c0718940>] (driver_register+0x88/0x14c) from [<c06a1b84>] (mcde_display_driver_register+0x68/0x84)
  241. [ 0.658477] [<c06a1b84>] (mcde_display_driver_register+0x68/0x84) from [<c0022278>] (s6e63m0_init+0x14/0x48)
  242. [ 0.658508] [<c0022278>] (s6e63m0_init+0x14/0x48) from [<c045b84c>] (do_one_initcall+0x128/0x190)
  243. [ 0.658508] [<c045b84c>] (do_one_initcall+0x128/0x190) from [<c0008bbc>] (kernel_init+0x98/0x144)
  244. [ 0.658538] [<c0008bbc>] (kernel_init+0x98/0x144) from [<c0463288>] (kernel_thread_exit+0x0/0x8)
  245. [ 0.658569] Board Information: UX500: 0E, cpu U8500 ES178
  246. [ 0.658599] ---[ end trace 65f8ea860415c04f ]---
  247. [ 0.658599] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: failed to add lcd_power sysfs entries
  248. [ 0.663513] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: Framebuffer created (pri_lcd_s6e63m0)
  249. [ 0.663879] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: compdev created for (pri_lcd_s6e63m0)
  250. [ 0.664031] b2r2_blt_init
  251. [ 0.664123] b2r2_blt b2r2_blt_init: b2r2_blt_probe start.
  252. [ 0.664306] b2r2_blt b2r2_blt_init: b2r2_blt_probe done.
  253. [ 0.664520] b2r2_init
  254. [ 0.664581] b2r2 b2r2_core: init started.
  255. [ 0.667022] b2r2 b2r2_core: b2r2_mem_init: Creating heap for size 16384 bytes
  256. [ 0.667175] b2r2 b2r2_core: b2r2_probe done.
  257. [ 0.668121] uart-pl011 uart0: no DMA platform data
  258. [ 0.668151] uart-pl011 uart1: no DMA platform data
  259. [ 0.668151] uart-pl011 uart2: no DMA platform data
  260. [ 0.668243] Mali<2>:
  261. [ 0.668273] Mali<2>: Inserting Mali v17 device driver.
  262. [ 0.668273] Mali<2>: Compiled: Apr 16 2013, time: 18:43:41.
  263. [ 0.668304] Mali<2>: Driver revision: r3p1-01rel0
  264. [ 0.668884] Mali<2>: Memory system initializing
  265. [ 0.668884] Mali<2>: Mali OS memory allocator created with max allocation size of 0x7FF00000 bytes, cpu_usage_adjust 0x00000000
  266. [ 0.668914] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base=0x00000000, size=0x7FF00000
  267. [ 0.668945] Mali<2>: Mali PP: Creating Mali PP core: Mali-400 PP
  268. [ 0.668945] Mali<2>: Mali PP: Base address of PP core: 0xa0308000
  269. [ 0.669067] Mali<2>: Found Mali GPU Mali-400 MP r1p0
  270. [ 0.669677] Mali<2>: Mali L2 cache: Creating Mali L2 cache: Mali-400 L2 cache
  271. [ 0.669738] Mali<2>: Mali MMU: Creating Mali MMU: Mali-400 MMU for GP
  272. [ 0.669769] Mali<2>: Mali GP: Creating Mali GP core: Mali-400 GP
  273. [ 0.669799] Mali<2>: Mali MMU: Creating Mali MMU: Mali-400 MMU for PP
  274. [ 0.669830] Mali<2>: Mali PP: Creating Mali PP core: Mali-400 PP
  275. [ 0.669860] Mali<2>: Mali PP: Base address of PP core: 0xa0308000
  276. [ 0.670440] Mali: Mali device driver loaded
  277. [ 0.678741] brd: module loaded
  278. [ 0.682586] loop: module loaded
  279. [ 0.684051] dbx500_mloader_fw dbx500_mloader_fw: mloader device register
  280. [ 0.684234] compdev_init
  281. [ 0.684234] clonedev_init
  282. [ 0.684265] immvibe_init
  283. [ 0.684356] immvibe_setup(), Vibrator gpio's are configured.
  284. [ 0.684600] input: Vibrator as /devices/virtual/input/input0
  285. [ 0.684997] immvibe 6-0049: tspdrv tspdrv(6-0049) initialized
  286. [ 0.685150] i2c-core: driver [immvibe] using legacy suspend method
  287. [ 0.685150] i2c-core: driver [immvibe] using legacy resume method
  288. [ 0.686157] microUSB switch IC's Control register : 0xff, bootmode : 0
  289. [ 0.687103] MUIC Initial Event = 0x00000002
  290. [ 0.687957] ab8500-charger ab8500-charger.0: ab8500_charger_detect_chargers REG : 0x2, vbus_detect_charging : 0, usb_line_state : 0x1
  291. [ 0.687988] ab8500-charger ab8500-charger.0: USB is inserted
  292. [ 0.688018] ab8500-charger ab8500-charger.0: SW Fallback : 1
  293. [ 0.691772] ab8500-charger ab8500-charger.0: register_charging_i2c_dev 763
  294. [ 0.692016] battery_get_property: Fail to get psy (ab8500_chargalg)
  295. [ 0.692047] battery_get_property: Fail to get psy (ab8500_chargalg)
  296. [ 0.692077] ab8500-charger ab8500-charger.0: ab8500_charger_detect_chargers REG : 0x2, vbus_detect_charging : 0, usb_line_state : 0x1
  297. [ 0.692108] ab8500-charger ab8500-charger.0: USB is inserted
  298. [ 0.692108] ab8500-charger ab8500-charger.0: SW Fallback : 1
  299. [ 0.700469] s6e63mo_mtp_from_boot main_mtp_data[0] : 00
  300. [ 0.700531] s6e63mo_mtp_from_boot main_mtp_data[1] : 32
  301. [ 0.700561] s6e63mo_mtp_from_boot main_mtp_data[2] : 11
  302. [ 0.700592] s6e63mo_mtp_from_boot main_mtp_data[3] : 0c
  303. [ 0.700622] s6e63mo_mtp_from_boot main_mtp_data[4] : 06
  304. [ 0.700653] s6e63mo_mtp_from_boot main_mtp_data[5] : 00
  305. [ 0.700683] s6e63mo_mtp_from_boot main_mtp_data[6] : 08
  306. [ 0.700714] s6e63mo_mtp_from_boot main_mtp_data[7] : 00
  307. [ 0.700744] s6e63mo_mtp_from_boot main_mtp_data[8] : 2b
  308. [ 0.700775] s6e63mo_mtp_from_boot main_mtp_data[9] : 10
  309. [ 0.700775] s6e63mo_mtp_from_boot main_mtp_data[10] : 09
  310. [ 0.700805] s6e63mo_mtp_from_boot main_mtp_data[11] : 0a
  311. [ 0.700805] s6e63mo_mtp_from_boot main_mtp_data[12] : 00
  312. [ 0.700836] s6e63mo_mtp_from_boot main_mtp_data[13] : 06
  313. [ 0.700836] s6e63mo_mtp_from_boot main_mtp_data[14] : 00
  314. [ 0.700836] s6e63mo_mtp_from_boot main_mtp_data[15] : 37
  315. [ 0.700866] s6e63mo_mtp_from_boot main_mtp_data[16] : 14
  316. [ 0.700866] s6e63mo_mtp_from_boot main_mtp_data[17] : 0b
  317. [ 0.700897] s6e63mo_mtp_from_boot main_mtp_data[18] : 0c
  318. [ 0.700897] s6e63mo_mtp_from_boot main_mtp_data[19] : 01
  319. [ 0.700897] battery_get_property: Fail to get psy (ab8500_chargalg)
  320. [ 0.700927] battery_get_property: Fail to get psy (ab8500_chargalg)
  321. [ 0.700927] s6e63mo_mtp_from_boot main_mtp_data[20] : f3
  322. [ 0.701141] Generate_gray_scale end
  323. [ 0.703918] PPP generic driver version 2.4.2
  324. [ 0.703979] battery_get_property: Fail to get psy (ab8500_chargalg)
  325. [ 0.704040] battery_get_property: Fail to get psy (ab8500_chargalg)
  326. [ 0.704040] battery_get_property: Fail to get psy (ab8500_chargalg)
  327. [ 0.705352] PPP MPPE Compression module registered
  328. [ 0.705383] NET: Registered protocol family 24
  329. [ 0.705413] tun: Universal TUN/TAP device driver, 1.6
  330. [ 0.705413] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  331. [ 0.706512] usbcore: registered new interface driver cdc_acm
  332. [ 0.706512] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  333. [ 0.706542] Initializing USB Mass Storage driver...
  334. [ 0.706695] usbcore: registered new interface driver usb-storage
  335. [ 0.706726] USB Mass Storage support registered.
  336. [ 0.706878] usbcore: registered new interface driver libusual
  337. [ 0.710815] android_usb gadget: Mass Storage Function, version: 2009/09/11
  338. [ 0.710845] android_usb gadget: Number of LUNs=2
  339. [ 0.710845] lun0: LUN: removable file: (no medium)
  340. [ 0.710876] lun1: LUN: removable file: (no medium)
  341. [ 0.711608] android_usb gadget: android_usb ready
  342. [ 0.711639] musb-hdrc musb-hdrc: MUSB HDRC host driver
  343. [ 0.711944] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
  344. [ 0.712677] hub 1-0:1.0: USB hub found
  345. [ 0.712707] hub 1-0:1.0: 1 port detected
  346. [ 0.714172] input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
  347. [ 0.714996] input: sec_touchscreen as /devices/virtual/input/input2
  348. [ 0.783966] mxt224_power_con is finished.(on)
  349. [ 0.784606] mxt224_ts 3-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
  350. [ 0.784606] family = 0x81, variant = 0x1, version = 0x10, build = 170
  351. [ 0.794097] [TSP] TSP chip is MXT224-E
  352. [ 0.903961] [TSP] calibration success!!!
  353. [ 0.904663] mxt224_ts 3-004a: vbus_state = 1
  354. [ 0.907623] [TSP]TA_probe MXT224E T48 Byte7 is 114
  355. [ 0.907653] [TSP] threshold : 25
  356. [ 0.909057] input: AB8500 POn(PowerOn) Key as /devices/platform/ab8500-i2c.0/ab8500-poweron-key.0/input/input3
  357. [ 0.909576] [TSP] Calibration End!!!!!!
  358. [ 0.913574] ab8500-rtc ab8500-rtc.0: rtc core: registered ab8500-rtc as rtc0
  359. [ 0.914672] using rtc device, pl031, for alarms
  360. [ 0.914672] rtc-pl031 rtc-pl031: rtc core: registered pl031 as rtc1
  361. [ 0.914855] i2c /dev entries driver
  362. [ 0.916717] Linux video capture interface: v2.00
  363. [ 0.918914] dbx500_temp dbx500_temp.0: plat dat incorrect
  364. [ 0.919525] ux500_wdt ux500_wdt: wdog_init: kernel kicker enabled
  365. [ 0.919616] ux500_wdt ux500_wdt: initialized
  366. [ 0.920043] device-mapper: uevent: version 1.0.3
  367. [ 0.920532] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  368. [ 0.920623] Bluetooth: HCI UART driver ver 2.2
  369. [ 0.920623] Bluetooth: HCI H4 protocol initialized
  370. [ 0.920654] Bluetooth: HCILL protocol initialized
  371. [ 0.920867] dbx500-cpufreq : Available frequencies:
  372. [ 0.920867] 200 Mhz
  373. [ 0.920898] 400 Mhz
  374. [ 0.920898] 800 Mhz
  375. [ 0.920898] 1000 Mhz
  376. [ 0.921020] DVFS Governor Policy set to - ondemand
  377. [ 0.921600] cpuidle: using governor ladder
  378. [ 0.921630] cpuidle: using governor menu
  379. [ 0.921691] ab8500-chargalg ab8500-chargalg.0: State changed: YES (From state: [0] HANDHELD_INIT =to=> [6] NORMAL_INIT )
  380. [ 0.921691] Charging is started by USB Type charger
  381. [ 0.921813] ab8500-charger ab8500-charger.0: ab8500_charger_detect_chargers REG : 0x2, vbus_detect_charging : 0, usb_line_state : 0x1
  382. [ 0.921844] ab8500-charger ab8500-charger.0: USB is inserted
  383. [ 0.921875] ab8500-charger ab8500-charger.0: SW Fallback : 1
  384. [ 0.922180] mmci-pl18x sdi2: mmc0: PL180 manf 80 rev4 at 0x80005000 irq 73,-1 (pio)
  385. [ 0.922241] dma dma0chan16: allocated logical channel (phy 3)
  386. [ 0.922241] dma dma0chan17: allocated logical channel (phy 3)
  387. [ 0.922271] mmci-pl18x sdi2: DMA channels RX dma0chan16, TX dma0chan17
  388. [ 0.923095] ab8500-charger ab8500-charger.0: initialize vdrop state array
  389. [ 0.923156] ab8500-charger ab8500-charger.0: Enable USB: 4200mV 500mA
  390. [ 0.923248] ab8500-charger ab8500-charger.0: ab8500_charger_set_main_in_curr Setting input current limit to 0x00 current=0
  391. [ 0.923400] ab8500-chargalg ab8500-chargalg.0: State changed: YES (From state: [6] NORMAL_INIT =to=> [7] NORMAL )
  392. [ 0.924652] [TSP] Calibration!!!!!!
  393. [ 0.941528] ab8500-charger ab8500-charger.0: ab8500_charger_set_main_in_curr Setting input current limit to 0x04 current=500
  394. [ 0.943878] ab8500-charger ab8500-charger.0: USB Type - 0x01 MaxCurr: 0
  395. [ 0.951416] [TSP] Calibration End!!!!!!
  396. [ 0.963439] mmci-pl18x sdi0: Provided ocr_mask/setpower will not be used (using regulator instead)
  397. [ 0.964080] mmci-pl18x sdi0: mmc1: PL180 manf 80 rev4 at 0x80126000 irq 92,-1 (pio)
  398. [ 0.964141] dma dma0chan18: allocated logical channel (phy 0, fixed)
  399. [ 0.964202] dma dma0chan19: allocated logical channel (phy 0, fixed)
  400. [ 0.964233] mmci-pl18x sdi0: DMA channels RX dma0chan18, TX dma0chan19
  401. [ 0.964263] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  402. [ 0.964843] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  403. [ 0.974914] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 8
  404. [ 0.975311] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  405. [ 0.975769] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  406. [ 0.976104] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  407. [ 0.976440] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  408. [ 0.976776] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  409. [ 0.977142] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  410. [ 0.977478] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  411. [ 0.977844] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  412. [ 1.007049] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  413. [ 1.007110] ab8500-fg ab8500-fg.0: Calibration ongoing...
  414. [ 1.007629] [FG_DATA] 1320mAh/1500mAh 88% (Prev 1320mAh 88%) 4047mV 740 740 233mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 0 0 0 0 0
  415. [ 1.008422] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  416. [ 1.008514] ab8500-fg ab8500-fg.0: Calibration WFI
  417. [ 1.011230] [FG_DATA] 1320mAh/1500mAh 88% (Prev 1320mAh 88%) 4112mV 740 740 233mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 0 0 0 0 0
  418. [ 1.013305] WLAN is not setting MMC_CAP_NEEDS_POLL
  419. [ 1.013458] mmci-pl18x sdi1: mmc2: PL180 manf 80 rev4 at 0x80118000 irq 82,-1 (pio)
  420. [ 1.013580] dma dma0chan20: allocated logical channel (phy 4)
  421. [ 1.013671] dma dma0chan21: allocated logical channel (phy 5)
  422. [ 1.013763] mmci-pl18x sdi1: DMA channels RX dma0chan20, TX dma0chan21
  423. [ 1.019805] mmc0: new high speed MMC card at address 0001
  424. [ 1.022949] mmcblk0: mmc0:0001 SEM16G 14.6 GiB
  425. [ 1.023345] mmcblk0boot0: mmc0:0001 SEM16G partition 1 2.00 MiB
  426. [ 1.023742] mmcblk0boot1: mmc0:0001 SEM16G partition 2 2.00 MiB
  427. [ 1.034912] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
  428. [ 1.053161] mmcblk0boot1: unknown partition table
  429. [ 1.053497] gp2a_i2c_probe: probe start!
  430. [ 1.053833] [00]: 0xfe
  431. [ 1.055480] input: proximity_sensor as /devices/virtual/input/input4
  432. [ 1.057464] input: light_sensor as /devices/virtual/input/input5
  433. [ 1.063323] gp2a_i2c_probe: probe success!
  434. [ 1.067779] input: orientation as /devices/virtual/input/input6
  435. [ 1.068389] mmcblk0boot0: unknown partition table
  436. [ 1.069885] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  437. [ 1.070129] [mpu3050] mpu3050_probe,1519
  438. [ 1.070739] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  439. [ 1.072174] mpu3050_probe CONFIG_LIGHT_PROX_GP2A regulator_set
  440. [ 1.075958] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  441. [ 1.076354] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  442. [ 1.076721] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  443. [ 1.077117] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  444. [ 1.203765] mmc1: host does not support reading read-only switch. assuming write-enable.
  445. [ 1.206451] mmc1: new high speed SDHC card at address aaaa
  446. [ 1.206939] mmcblk1: mmc1:aaaa SU16G 14.8 GiB
  447. [ 1.210662] mmcblk1: p1
  448. [ 1.219696] i2c i2c-8: mpu-dev: +bma222
  449. [ 1.219726] i2c i2c-8: WARNING: Accel irq not assigned
  450. [ 1.219726] i2c i2c-8: mpu-dev: No Compass Present
  451. [ 1.219726] i2c i2c-8: mpu-dev: No Pressure Present
  452. [ 1.220214] mldl_cfg:Reset MPU3050
  453. [ 1.236389] i2c i2c-8: Installing irq using 482
  454. [ 1.236389] i2c i2c-8: Module Param interface = mpuirq
  455. [ 1.236999] input: mpu-accel as /devices/virtual/input/input7
  456. [ 1.237335] i2c-core: driver [mpu-dev] using legacy suspend method
  457. [ 1.237365] i2c-core: driver [mpu-dev] using legacy resume method
  458. [ 1.237640] geomagnetic_init
  459. [ 1.237670] geomagnetic_probe
  460. [ 1.237945] input: geomagnetic as /devices/platform/i2c-gpio.4/i2c-4/4-002e/input/input8
  461. [ 1.238403] input: geomagnetic_raw as /devices/platform/i2c-gpio.4/i2c-4/4-002e/input/input9
  462. [ 1.238739] i2c-core: driver [geomagnetic] using legacy suspend method
  463. [ 1.238769] i2c-core: driver [geomagnetic] using legacy resume method
  464. [ 1.238922] hash1 hash1: managed by runtime pm: regulator
  465. [ 1.243041] hash1 hash1: [ux500_hash_probe] successfully probed
  466. [ 1.248229] usbcore: registered new interface driver usbhid
  467. [ 1.248260] usbhid: USB HID core driver
  468. [ 1.253387] logger: created 2048K log 'log_main'
  469. [ 1.253570] logger: created 256K log 'log_events'
  470. [ 1.253753] logger: created 1024K log 'log_radio'
  471. [ 1.253936] logger: created 256K log 'log_system'
  472. [ 1.254119] logger: created 256K log 'log_sf'
  473. [ 1.254486] mmio_probe
  474. [ 1.254821] mmio_camera mmio_camera: MMIO driver initialized with minor=39
  475. [ 1.254852] mmio_camera mmio_camera: NCP6914 Camera Sub-PMIC
  476. [ 1.254882] -> NCP6914_subPMIC_module_init
  477. [ 1.254943] -> NCP6914_i2c_probe(client=ncp6914, id=ncp6914)
  478. [ 1.254943] <- NCP6914_i2c_probe(client=ncp6914) = 0
  479. [ 1.255096] <- NCP6914_subPMIC_module_init
  480. [ 1.255126] -> NCP6914_subPMIC_PowerOn
  481. [ 1.259521] <- NCP6914_subPMIC_PowerOn
  482. [ 1.259979] VT_CAM_ID = 0
  483. [ 1.274047] Initialize NMF 2.10.123 Component Manager......
  484. [ 1.274078] [ CM Linux Driver 2.10.122 ]
  485. [ 1.276550] u8500_shrm shrm_bus: IPC_ISA BOOT_INIT
  486. [ 1.277679] u8500_shrm shrm_bus: BOOT_INFO_SYNC
  487. [ 1.277832] [svnet_init]
  488. [ 1.278015] u8500_shrm shrm_bus: IPC_ISA BOOT_DONE
  489. [ 1.279052] [create_rmnet] channel: 1
  490. [ 1.279998] [create_rmnet] channel: 2
  491. [ 1.280914] [create_rmnet] channel: 3
  492. [ 1.281890] [createPDP] Done
  493. [ 1.282287] ------------[ cut here ]------------
  494. [ 1.282318] WARNING: at /home/shaaan/android/system/kernel/samsung/u8500/fs/sysfs/dir.c:457 sysfs_add_one+0x94/0xb4()
  495. [ 1.282318] sysfs: cannot create duplicate filename '/devices/virtual/switch/usb_audio'
  496. [ 1.282348] Modules linked in:
  497. [ 1.282379] [<c0469e40>] (unwind_backtrace+0x0/0x144) from [<c0a47980>] (dump_stack+0x20/0x24)
  498. [ 1.282409] [<c0a47980>] (dump_stack+0x20/0x24) from [<c049c1c0>] (warn_slowpath_common+0x5c/0x74)
  499. [ 1.282440] [<c049c1c0>] (warn_slowpath_common+0x5c/0x74) from [<c049c294>] (warn_slowpath_fmt+0x40/0x48)
  500. [ 1.282470] [<c049c294>] (warn_slowpath_fmt+0x40/0x48) from [<c05b5e8c>] (sysfs_add_one+0x94/0xb4)
  501. [ 1.282501] [<c05b5e8c>] (sysfs_add_one+0x94/0xb4) from [<c05b5f1c>] (create_dir+0x70/0xcc)
  502. [ 1.282501] [<c05b5f1c>] (create_dir+0x70/0xcc) from [<c05b6048>] (sysfs_create_dir+0x94/0x100)
  503. [ 1.282531] [<c05b6048>] (sysfs_create_dir+0x94/0x100) from [<c0672c1c>] (kobject_add_internal+0xb8/0x260)
  504. [ 1.282562] [<c0672c1c>] (kobject_add_internal+0xb8/0x260) from [<c06730fc>] (kobject_add+0x54/0x94)
  505. [ 1.282592] [<c06730fc>] (kobject_add+0x54/0x94) from [<c0715358>] (device_add+0xa4/0x5c0)
  506. [ 1.282806] [<c0715358>] (device_add+0xa4/0x5c0) from [<c0715898>] (device_register+0x24/0x28)
  507. [ 1.282836] [<c0715898>] (device_register+0x24/0x28) from [<c0715938>] (device_create_vargs+0x9c/0xcc)
  508. [ 1.282867] [<c0715938>] (device_create_vargs+0x9c/0xcc) from [<c0715998>] (device_create+0x30/0x38)
  509. [ 1.282867] [<c0715998>] (device_create+0x30/0x38) from [<c082701c>] (switch_dev_register+0x6c/0x128)
  510. [ 1.282897] [<c082701c>] (switch_dev_register+0x6c/0x128) from [<c002ddd4>] (snd_usb_audio_init+0x44/0x6c)
  511. [ 1.282928] [<c002ddd4>] (snd_usb_audio_init+0x44/0x6c) from [<c045b84c>] (do_one_initcall+0x128/0x190)
  512. [ 1.282958] [<c045b84c>] (do_one_initcall+0x128/0x190) from [<c0008bbc>] (kernel_init+0x98/0x144)
  513. [ 1.282989] [<c0008bbc>] (kernel_init+0x98/0x144) from [<c0463288>] (kernel_thread_exit+0x0/0x8)
  514. [ 1.282989] Board Information: UX500: 0E, cpu U8500 ES178
  515. [ 1.283020] ---[ end trace 65f8ea860415c050 ]---
  516. [ 1.283020] kobject_add_internal failed for usb_audio with -EEXIST, don't try to register things with the same name in the same directory.
  517. [ 1.283050] [<c0469e40>] (unwind_backtrace+0x0/0x144) from [<c0a47980>] (dump_stack+0x20/0x24)
  518. [ 1.283081] [<c0a47980>] (dump_stack+0x20/0x24) from [<c0672d9c>] (kobject_add_internal+0x238/0x260)
  519. [ 1.283111] [<c0672d9c>] (kobject_add_internal+0x238/0x260) from [<c06730fc>] (kobject_add+0x54/0x94)
  520. [ 1.283142] [<c06730fc>] (kobject_add+0x54/0x94) from [<c0715358>] (device_add+0xa4/0x5c0)
  521. [ 1.283142] [<c0715358>] (device_add+0xa4/0x5c0) from [<c0715898>] (device_register+0x24/0x28)
  522. [ 1.283172] [<c0715898>] (device_register+0x24/0x28) from [<c0715938>] (device_create_vargs+0x9c/0xcc)
  523. [ 1.283203] [<c0715938>] (device_create_vargs+0x9c/0xcc) from [<c0715998>] (device_create+0x30/0x38)
  524. [ 1.283203] [<c0715998>] (device_create+0x30/0x38) from [<c082701c>] (switch_dev_register+0x6c/0x128)
  525. [ 1.283233] [<c082701c>] (switch_dev_register+0x6c/0x128) from [<c002ddd4>] (snd_usb_audio_init+0x44/0x6c)
  526. [ 1.283264] [<c002ddd4>] (snd_usb_audio_init+0x44/0x6c) from [<c045b84c>] (do_one_initcall+0x128/0x190)
  527. [ 1.283264] [<c045b84c>] (do_one_initcall+0x128/0x190) from [<c0008bbc>] (kernel_init+0x98/0x144)
  528. [ 1.283294] [<c0008bbc>] (kernel_init+0x98/0x144) from [<c0463288>] (kernel_thread_exit+0x0/0x8)
  529. [ 1.283813] usbcore: registered new interface driver snd-usb-audio
  530. [ 1.284729] ab850x_codec_platform_driver_init: Enter.
  531. [ 1.284820] detect_chipid: AB8500 chipset detected! (cid 51)
  532. [ 1.284820] ab850x_codec_driver_probe: Register codec.
  533. [ 1.285186] ux500_msp_init: Register ux500-msp-dai platform driver.
  534. [ 1.285247] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s).
  535. [ 1.285308] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI.
  536. [ 1.285369] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s).
  537. [ 1.285400] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI.
  538. [ 1.285430] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s).
  539. [ 1.285461] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI.
  540. [ 1.285491] ux500_msp_drv_probe: Enter (pdev->name = ux500-msp-i2s).
  541. [ 1.285522] ux500_msp_drv_probe: Registering ux500-msp-dai SoC CPU-DAI.
  542. [ 1.285980] ux500_pcm_drv_probe: Register ux500-pcm SoC platform driver.
  543. [ 1.294158] asoc: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok
  544. [ 1.294799] asoc: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok
  545. [ 1.295501] asoc: snd-soc-dummy-dai <-> ux500-msp-i2s.0 mapping ok
  546. [ 1.296844] input: U8500-card AB8500 Hs Status as /devices/platform/soc-audio/sound/card0/input10
  547. [ 1.297302] ALSA device list:
  548. [ 1.297302] #0: U8500-card
  549. [ 1.297454] GACT probability NOT on
  550. [ 1.297485] Mirror/redirect action on
  551. [ 1.297515] u32 classifier
  552. [ 1.297515] Actions configured
  553. [ 1.297546] Netfilter messages via NETLINK v0.30.
  554. [ 1.297637] nf_conntrack version 0.5.0 (9923 buckets, 39692 max)
  555. [ 1.298431] ctnetlink v0.93: registering with nfnetlink.
  556. [ 1.298553] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  557. [ 1.298553] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  558. [ 1.299194] xt_time: kernel timezone is -0000
  559. [ 1.301055] ip_tables: (C) 2000-2006 Netfilter Core Team
  560. [ 1.301269] arp_tables: (C) 2002 David S. Miller
  561. [ 1.301330] TCP cubic registered
  562. [ 1.301483] NET: Registered protocol family 10
  563. [ 1.308593] Mobile IPv6
  564. [ 1.308654] ip6_tables: (C) 2000-2006 Netfilter Core Team
  565. [ 1.308959] IPv6 over IPv4 tunneling driver
  566. [ 1.315063] NET: Registered protocol family 17
  567. [ 1.315124] NET: Registered protocol family 15
  568. [ 1.315277] Bluetooth: RFCOMM TTY layer initialized
  569. [ 1.315307] Bluetooth: RFCOMM socket layer initialized
  570. [ 1.315307] Bluetooth: RFCOMM ver 1.11
  571. [ 1.315338] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  572. [ 1.315338] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  573. [ 1.315673] NET: Registered protocol family 35
  574. [ 1.315887] Installing 9P2000 support
  575. [ 1.316009] NET: Registered protocol family 37
  576. [ 1.316101] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
  577. [ 1.316162] Registering SWP/SWPB emulation handler
  578. [ 1.316955] DVFS Governor Policy set to - ondemand
  579. [ 1.316986] DVFS Governor Policy set to - ondemand
  580. [ 1.317230] Use-case governor initialized
  581. [ 1.317993] l2x0-prefetch: initialized.
  582. [ 1.425323] regulator_init_complete: ab8500-ext-supply3: disabling
  583. [ 1.425476] regulator_init_complete: db8500-esram12: disabling
  584. [ 1.425842] sec_jack_probe : Registering jack driver
  585. [ 1.426513] input: sec_jack as /devices/virtual/input/input11
  586. [ 1.427734] sec_jack_get_det_level: ret=1
  587. [ 1.529510] input: sec_touchkey as /devices/platform/i2c-gpio.5/i2c-5/5-0020/input/input12
  588. [ 1.530639] cypress_touchkey 5-0020: cypress_touchkey_con_hw : called with flag 1.
  589. [ 1.666351] cypress_touchkey 5-0020: cypress_touchkey_probe: called.
  590. [ 1.667968] ab8500-rtc ab8500-rtc.0: setting system clock to 2013-04-16 14:04:29 UTC (1366121069)
  591. [ 1.672485] dbx500-cpuidle dbx500-cpuidle: initiated for CPU0.
  592. [ 1.676879] dbx500-cpuidle dbx500-cpuidle: initiated for CPU1.
  593. [ 1.678161] Warning: unable to open an initial console.
  594. [ 1.681091] Freeing init memory: 4428K
  595. [ 1.831481] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  596. [ 2.600830] init: could not open /dev/keychord
  597. [ 2.601379] init: cannot open '/initlogo.rle'
  598. [ 2.661560] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  599. [ 2.680572] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  600. [ 2.697357] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
  601. [ 2.714965] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  602. [ 2.731689] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
  603. [ 2.749755] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
  604. [ 2.799072] EXT4-fs (mmcblk0p2): recovery complete
  605. [ 2.801513] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  606. [ 2.943908] ab8500-charger ab8500-charger.0: ab8500_charger_detect_chargers REG : 0x2, vbus_detect_charging : 0, usb_line_state : 0x1
  607. [ 2.944000] ab8500-charger ab8500-charger.0: USB is inserted
  608. [ 2.944030] ab8500-charger ab8500-charger.0: SW Fallback : 1
  609. [ 2.944885] ab8500-charger ab8500-charger.0: USB Type - 0x01 MaxCurr: 500
  610. [ 2.957824] j4fs: module license 'unspecified' taints kernel.
  611. [ 2.957885] Disabling lock debugging due to kernel taint
  612. [ 2.963867] j4fs: FlashDevMount : filp_open() OK....!
  613. [ 2.973510] param_init
  614. [ 2.973632] lfs_param_op: filp_open failed. (-2)
  615. [ 2.973663] param_init(358): Loading parameters failed. Parameters have been initialized as default.
  616. [ 2.988616] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  617. [ 2.988708] ab8500-fg ab8500-fg.0: Calibration WFI
  618. [ 2.989593] [FG_DATA] 1320mAh/1500mAh 88% (Prev 1320mAh 88%) 4110mV 739 739 233mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 0 0 0 0 0
  619. [ 2.991668] ######## bthid_init: ########
  620. [ 2.995880] ######## bthid_init: done ########
  621. [ 3.079559] init: cannot find '/system/xbin/watchdog-kicker', disabling 'watchdog-kicker'
  622. [ 3.080902] init: cannot find '/system/bin/modem-supervisor', disabling 'modem-supervisor'
  623. [ 3.081176] init: cannot find '/system/bin/copsdaemon', disabling 'copsd'
  624. [ 3.098144] init: cannot find '/system/bin/immvibed', disabling 'immvibed'
  625. [ 3.109191] init: cannot find '/system/bin/npsmobex', disabling 'mobex-daemon'
  626. [ 3.109283] init: cannot find '/system/bin/macloader', disabling 'macloader'
  627. [ 3.110473] init: cannot find '/system/xbin/battery_params', disabling 'battery_params'
  628. [ 3.126739] init: cannot find '/system/bin/modem_log_relay', disabling 'modem_log_relay'
  629. [ 3.126800] init: cannot find '/system/bin/at_core', disabling 'atd'
  630. [ 3.126861] init: cannot find '/system/bin/geomagneticd6x', disabling 'geomagneticd'
  631. [ 3.126892] init: cannot find '/system/bin/orientationd6x', disabling 'orientationd'
  632. [ 3.126922] init: cannot find '/system/bin/ta_loader', disabling 'ta_load'
  633. [ 3.126953] init: cannot find '/system/bin/at_distributor', disabling 'at_distributor'
  634. [ 3.132537] init: service 'console' requires console
  635. [ 3.139648] ab8500-usb ab8500-usb.0: ab8500_usb_link_status_update 1
  636. [ 3.141815] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  637. [ 3.142944] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  638. [ 3.143615] adb_bind_config
  639. [ 3.147521] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  640. [ 3.149047] warning: `adbd' uses 32-bit capabilities (legacy support in use)
  641. [ 3.149719] adb_open
  642. [ 3.192474] ADDRCONF(NETDEV_UP): upnlink0: link is not ready
  643. [ 3.256378] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  644. [ 3.260467] ab8500-fg ab8500-fg.0: Calibration done...
  645. [ 3.260864] [FG_DATA] 1320mAh/1500mAh 88% (Prev 1320mAh 88%) 4117mV 742 742 233mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 0 0 0 0 0
  646. [ 3.262542] [FG_DATA] 1320mAh/1500mAh 88% (Prev 1320mAh 88%) 4117mV 742 742 233mA 0mA 0 7 1 1 2 0 0 120 0 0 0 0 0 0 1678 0 0 0 40 0
  647. [ 3.313507] DVFS Governor Policy set to - ondemand
  648. [ 3.313537] new min and max freqs are 1000000 - 1000000 kHz
  649. [ 3.314331] DVFS Governor Policy set to - ondemand
  650. [ 3.438873] android_work: sent uevent USB_STATE=CONNECTED
  651. [ 3.442047] android_work: sent uevent USB_STATE=DISCONNECTED
  652. [ 3.569061] android_work: sent uevent USB_STATE=CONNECTED
  653. [ 3.569915] android_usb gadget: high speed config #1: android
  654. [ 3.570190] android_work: sent uevent USB_STATE=CONFIGURED
  655. [ 4.314331] DVFS Governor Policy set to - ondemand
  656. [ 4.314361] new min and max freqs are 200000 - 1000000 kHz
  657. [ 4.314361] DVFS Governor Policy set to - ondemand
  658. [ 4.648223] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: Power from mode 1 to 2
  659. [ 4.648284] Requested APE QOS = -1
  660. [ 4.850524] logger_release: took 0 msec
  661. [ 4.871002] logger_release: took 0 msec
  662. [ 4.898498] logger_release: took 0 msec
  663. [ 4.900665] logger_release: took 0 msec
  664. [ 4.905029] init: untracked pid 1676 exited
  665. [ 5.313842] DVFS Governor Policy set to - ondemand
  666. [ 5.313873] new min and max freqs are 1000000 - 1000000 kHz
  667. [ 5.313903] DVFS Governor Policy set to - ondemand
  668. [ 6.313842] DVFS Governor Policy set to - ondemand
  669. [ 6.313873] new min and max freqs are 200000 - 1000000 kHz
  670. [ 6.313903] DVFS Governor Policy set to - ondemand
  671. [ 7.994354] ab8500-fg ab8500-fg.0: [FG_DATA] SwitchOffStatus : 0x8
  672. [ 7.994415] ab8500-fg ab8500-fg.0: [FG_DATA] OFF STATUS, 0x0
  673. [ 7.994445] [FG_DATA] *** Maybe this is a first boot ***
  674. [ 7.994506] inside set_param_value1 idx = 13, value = -1
  675. [ 8.015686] save_lfs_param_value: param.blk write successfully. (size: 5284)
  676. [ 8.025756] ab8500-fg ab8500-fg.0: NEW capacity : 88, PARAM capacity : 0, VBAT : 4057
  677. [ 8.025817] ab8500-fg ab8500-fg.0: New capacity will be used as an initial capacity, new 88% ( param 0% )
  678. [ 9.906280] logger_release: took 0 msec
  679. [ 9.907348] logger_release: took 0 msec
  680. [ 9.922088] logger_release: took 0 msec
  681. [ 9.923370] logger_release: took 0 msec
  682. [ 9.927490] init: untracked pid 1878 exited
  683. [ 10.541137] init: untracked pid 1999 exited
  684. [ 13.495819] logger_release: took 0 msec
  685. [ 13.497283] logger_release: took 0 msec
  686. [ 13.511535] logger_release: took 0 msec
  687. [ 13.513153] logger_release: took 0 msec
  688. [ 13.517517] init: untracked pid 2021 exited
  689. [ 13.921051] ux500_wdt : reloaded by kernel kicker
  690. [ 14.404541] DVFS Governor Policy set to - ondemand
  691. [ 14.404602] new min and max freqs are 1000000 - 1000000 kHz
  692. [ 14.405181] DVFS Governor Policy set to - ondemand
  693. [ 16.763916] DVFS Governor Policy set to - ondemand
  694. [ 16.763946] new min and max freqs are 200000 - 1000000 kHz
  695. [ 16.763946] DVFS Governor Policy set to - ondemand
  696. [ 16.976379] init: untracked pid 2023 exited
  697. [ 19.207794] logger_release: took 0 msec
  698. [ 19.209747] logger_release: took 0 msec
  699. [ 19.225189] logger_release: took 0 msec
  700. [ 19.227264] logger_release: took 0 msec
  701. [ 19.231384] init: untracked pid 2053 exited
  702. [ 19.393371] init: untracked pid 2057 exited
  703. [ 20.567077] ab8500_btemp_measure_temp: vntc(161), rntc(22593), temp(42)
  704. [ 23.512725] [FG_DATA] 1321mAh/1500mAh 88% (Prev 1320mAh 88%) 4048mV 732 732 212mA 215mA 1197 7 1 1 2 0 0 120 0 88 0 0 0 0 1632 0 0 0 40 0
  705. [ 23.613647] logger_release: took 0 msec
  706. [ 23.616119] logger_release: took 0 msec
  707. [ 23.672088] logger_release: took 0 msec
  708. [ 23.675781] logger_release: took 0 msec
  709. [ 23.693939] DVFS Governor Policy set to - ondemand
  710. [ 23.693969] new min and max freqs are 1000000 - 1000000 kHz
  711. [ 23.693969] DVFS Governor Policy set to - ondemand
  712. [ 23.724639] init: untracked pid 2080 exited
  713. [ 26.920867] ux500_wdt : reloaded by kernel kicker
  714. [ 28.654510] DVFS Governor Policy set to - ondemand
  715. [ 28.654510] new min and max freqs are 200000 - 1000000 kHz
  716. [ 28.654541] DVFS Governor Policy set to - ondemand
  717. [ 28.951110] logger_release: took 0 msec
  718. [ 28.953887] logger_release: took 0 msec
  719. [ 28.968719] logger_release: took 0 msec
  720. [ 28.971618] logger_release: took 0 msec
  721. [ 28.982879] init: untracked pid 2120 exited
  722. [ 29.034484] init: untracked pid 2108 exited
  723. [ 33.234832] logger_release: took 0 msec
  724. [ 33.238037] logger_release: took 0 msec
  725. [ 33.252990] logger_release: took 0 msec
  726. [ 33.256439] logger_release: took 0 msec
  727. [ 33.273498] init: untracked pid 2165 exited
  728. [ 33.304931] init: untracked pid 2161 exited
  729. [ 34.251770] ab8500-poweron-key ab8500-poweron-key.0: Power KEY pressed 116
  730. [ 38.532287] logger_release: took 0 msec
  731. [ 38.536041] logger_release: took 0 msec
  732. [ 38.551025] logger_release: took 0 msec
  733. [ 38.554931] logger_release: took 0 msec
  734. [ 38.565429] init: untracked pid 2210 exited
  735. [ 38.585174] init: untracked pid 2206 exited
  736. [ 39.921478] ux500_wdt : reloaded by kernel kicker
  737. [ 40.754730] ab8500_btemp_measure_temp: vntc(163), rntc(22901), temp(41)
  738. [ 41.016601] [FG_DATA] 1321mAh/1500mAh 88% (Prev 1320mAh 88%) 4045mV 744 744 298mA 215mA 1197 7 1 1 2 0 0 120 0 88 0 0 0 0 1818 0 0 0 40 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!