jun_upgrade

U-Boot 1.1.6-JNPR-2.3 (Build time: Apr 23 2012 - 04:00:06)

SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM:  1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash:  4 MB
USB:   scanning bus for devices...
Root Hub 0: 4 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net:   octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (246924 bytes)
Loading .rodata @ 0x8f03c504 (13944 bytes)
Loading .rodata.str1.4 @ 0x8f03fb7c (16776 bytes)
Loading set_Xcommand_set @ 0x8f043d04 (100 bytes)
Loading .rodata.cst4 @ 0x8f043d68 (20 bytes)
Loading .data @ 0x8f044000 (5608 bytes)
Loading .data.rel.ro @ 0x8f0455e8 (120 bytes)
Loading .data.rel @ 0x8f045660 (136 bytes)
Clearing .bss @ 0x8f0456e8 (11656 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 2.3

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.3
(builder@evenath.juniper.net, Mon Apr 23 04:24:39 UTC 2012)
Memory: 1024MB
[4]Booting from nand-flash slice 2
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
Loading /boot/defaults/loader.conf
/kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722]


Hit [Enter] to boot immediately, or space bar for command prompt.


Type '?' for a list of commands, 'help' for more detailed help.
loader> install file:///jun.tgz
/kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722]
Kernel entry at 0x801000e0 ...
init regular console
Primary ICache: Sets 64 Size 128 Asso 4
Primary DCache: Sets 1 Size 128 Asso 64
Secondary DCache: Sets 512 Size 128 Asso 8
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno                                                      s/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno                                                      s/bsd/kernels/JSRXNLE/kernel
real memory  = 1073741824 (1024MB)
avail memory = 492883968 (470MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1
cpu0 on motherboard
: CAVIUM's 'OCTEON 52XX CPU Rev. 0.8 with no FPU implemented
        L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
        L2 Cache: Size 512kb, 8 way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 3 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682  High Speed Mode, rev 2.00/2.10, addr 3
umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4
dwc1: <Synopsis DWC OTG Controller Driver> on obio0
usb1: <USB Bus for DWC OTG Controller> on dwc1
usb1: USB revision 2.0
uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
cpld0 on obio0
pcib1: <Cavium on-chip PCIe HOST bridge> on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 2 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 1 lanes
pcib1: Initialized controller
pci0: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 0 at device 0.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <serial bus, USB> at device 2.0 (no driver attached)
pci1: <network> at device 7.0 (no driver attached)
pcib0: <Cavium on-chip PCIe HOST bridge> on obio0
pci2: <PCI bus> on pcib0
pci2: <processor> at device 0.0 (no driver attached)
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 4MB> on obio0
Timecounter "mips" frequency 600000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
md0: Preloaded image </isofs-install-srxsme> 10012672 bytes at 0x80e9223c
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Kingston DT Mini 10 1.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from cd9660:/dev/md0
WARNING: preposterous time in file system
WARNING: clock 9695 days greater than file system time
tty: not found
Starting JUNOS installation:
    Source Package: disk1:/jun.tgz
    Target Media  : internal
    Product       : srx240h
Computing slice and partition sizes for /dev/da0 ...
Media check on da0
Attempting to save existing configuration...
** /dev/da0s3e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
13 files, 18 used, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
Found configuration in /dev/da0s3e
Formatting target media /dev/da0 ...
Preparing to create slices on /dev/da0
/dev/da0: 2048000 sectors [C:1000 H:64 S:32 SS:512]
Shrinking slice 1 by 256 blocks for alignment
1+0 records in
1+0 records out
512 bytes transferred in 0.000383 secs (1337163 bytes/sec)
Creating slices:
g c1000 h64 s32
p 1    0xA5 256 610048
p 2    0xA5 610304 610304
p 3    0xA5 1220608 763904
p 4    0xA5 1984512 63488
a 1
******* Working on device /dev/da0 *******
Computing layout of partitions in /dev/da0s1...
Shrinking partition a by 1792 blocks for alignment
Labeling /dev/da0s1:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s1:
8 partitions:
#        size   offset    fstype   [fsize bsize bps/cpg]
  a:   608000      256    unused        0     0
  c:   610048        0    unused        0     0         # "raw" part, don't' edit
/dev/da0s1a: 296.9MB (607996 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 74.22MB, 4750 blks, 9600 inodes.
super-block backups (for fsck -b #) at:
 32, 152032, 304032, 456032
Computing layout of partitions in /dev/da0s2...
Labeling /dev/da0s2:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s2:
8 partitions:
#        size   offset    fstype   [fsize bsize bps/cpg]
  a:   610048      256    unused        0     0
  c:   610304        0    unused        0     0         # "raw" part, don't edit
/dev/da0s2a: 297.9MB (610044 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 74.47MB, 4766 blks, 9600 inodes.
super-block backups (for fsck -b #) at:
 32, 152544, 305056, 457568
Computing layout of partitions in /dev/da0s3...
Shrinking partition e by 256 blocks for alignment
Labeling /dev/da0s3:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s3:
8 partitions:
#        size   offset    fstype   [fsize bsize bps/cpg]
  c:   763904        0    unused        0     0         # "raw" part, don't edit
  e:    50944      256    unused        0     0
  f:   712704    51200    unused        0     0
/dev/da0s3e: 24.9MB (50940 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 6.22MB, 398 blks, 896 inodes.
super-block backups (for fsck -b #) at:
 32, 12768, 25504, 38240
/dev/da0s3f: 348.0MB (712700 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 87.00MB, 5568 blks, 11136 inodes.
super-block backups (for fsck -b #) at:
 32, 178208, 356384, 534560
Computing layout of partitions in /dev/da0s4...
Shrinking partition e by 256 blocks for alignment
Labeling /dev/da0s4:
bsdlabel: write to disk label supressed - label was as follows:
# /dev/da0s4:
8 partitions:
#        size   offset    fstype   [fsize bsize bps/cpg]
  a:    57344     6144    unused        0     0
  c:    63488        0    unused        0     0         # "raw" part, don't edit
  e:     5888      256    unused        0     0
/dev/da0s4a: 28.0MB (57340 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 7.00MB, 448 blks, 896 inodes.
super-block backups (for fsck -b #) at:
 32, 14368, 28704, 43040
/dev/da0s4e: 2.9MB (5884 sectors) block size 16384, fragment size 2048
        using 3 cylinder groups of 1.00MB, 64 blks, 128 inodes.
super-block backups (for fsck -b #) at:
 32, 2080, 4128
Creating root filesystem layout ...
Extracting contents of package ...
Verified SHA1 checksum of /a/cf/install/junos-boot-srxsme-12.1X45-D15.5.tgz
Verified SHA1 checksum of /a/cf/install/junos-srxsme-12.1X45-D15.5-domestic
Time and ticks drifted too much,                        resetting synchronization...
/sbin/init: cannot create /var/sw/pkg/.firstrebootfile: Read-only file system
Creating var filesystem layout ...
Restoring saved configuration.
Creating bsdlabel recovery information ...
Initializing inactive slice ...
machdep.bootsuccess: 0 -> 1
machdep.nextbootdev: nand-flash -> nand-flash
Installation completed successfully, rebooting ...
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done

syncing disks... All buffers synced.
Uptime: 3m51s
Rebooting...
cpu_reset: Stopping other CPUs


U-Boot 1.1.6-JNPR-2.3 (Build time: Apr 23 2012 - 04:00:06)

SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM:  1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash:  4 MB
USB:   scanning bus for devices...
Root Hub 0: 4 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net:   octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (246924 bytes)
Loading .rodata @ 0x8f03c504 (13944 bytes)
Loading .rodata.str1.4 @ 0x8f03fb7c (16776 bytes)
Loading set_Xcommand_set @ 0x8f043d04 (100 bytes)
Loading .rodata.cst4 @ 0x8f043d68 (20 bytes)
Loading .data @ 0x8f044000 (5608 bytes)
Loading .data.rel.ro @ 0x8f0455e8 (120 bytes)
Loading .data.rel @ 0x8f045660 (136 bytes)
Clearing .bss @ 0x8f0456e8 (11656 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 2.3

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.3
(builder@evenath.juniper.net, Mon Apr 23 04:24:39 UTC 2012)
Memory: 1024MB
[0]Booting from nand-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
Loading /boot/defaults/loader.conf
/kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000e0 ...
init regular console
Primary ICache: Sets 64 Size 128 Asso 4
Primary DCache: Sets 1 Size 128 Asso 64
Secondary DCache: Sets 512 Size 128 Asso 8
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno                                                      s/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/juno                                                      s/bsd/kernels/JSRXNLE/kernel
real memory  = 1073741824 (1024MB)
avail memory = 509661184 (486MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1
cpu0 on motherboard
: CAVIUM's' OCTEON 52XX CPU Rev. 0.8 with no FPU implemented
        L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
        L2 Cache: Size 512kb, 8 way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 3 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682  High Speed Mode, rev 2.00/2.10, addr 3
umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4
dwc1: <Synopsis DWC OTG Controller Driver> on obio0
usb1: <USB Bus for DWC OTG Controller> on dwc1
usb1: USB revision 2.0
uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
cpld0 on obio0
pcib1: <Cavium on-chip PCIe HOST bridge> on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 2 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 1 lanes
pcib1: Initialized controller
pci0: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 0 at device 0.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <serial bus, USB> at device 2.0 (no driver attached)
pci1: <network> at device 7.0 (no driver attached)
pcib0: <Cavium on-chip PCIe HOST bridge> on obio0
pci2: <PCI bus> on pcib0
pci2: <processor> at device 0.0 (no driver attached)
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 4MB> on obio0
Timecounter "mips" frequency 600000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Kingston DT Mini 10 1.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C)
Trying to mount root from ufs:/dev/da0s1a
MFSINIT: Initialising MFSROOT
Process-1 beginning MFSROOT initialization...
Creating MFSROOT...
/dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes.
super-block backups (for fsck -b #) at:
 32, 10272, 20512, 30752
Populating MFSROOT...
Creating symlinks...
Setting up mounts...
Continuing boot from MFSROOT...
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md1...
J
Media check on da0
Automatic reboot in progress...
** /dev/da0s1a (NO WRITE)
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? no

SUMMARY INFORMATION BAD
SALVAGE? no

BLK(S) MISSING IN BIT MAPS
SALVAGE? no

150 files, 76647 used, 72879 free (47 frags, 9104 blocks, 0.0% fragmentation)
mount reload of '/' failed: Operation not supported

Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
veriexec: cannot update veriexec for /sbin/preinit-main: No such file or directory
veriexec: cannot update veriexec for /sbin/init-mfs-root: No such file or directory
veriexec: cannot update veriexec for /sbin/chroot: No such file or directory
veriexec: cannot update veriexec for /sbin/settty: No such file or directory
Verified junos-12.1X45-D15.5-domestic signed by PackageProduction_12_1_0
Checking integrity of BSD labels:
  s1: Passed
  s2: Passed
  s3: Passed
  s4: Passed
** /dev/bo0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation)
** /dev/bo0s3f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 175297 free (25 frags, 21909 blocks, 0.0% fragmentation)
Checking integrity of licenses:
Checking integrity of configuration:
  rescue.conf.gz: No recovery data
Loading configuration ...
Time and ticks drifted too much,                        resetting synchronization...
veriexec: fingerprint for dev 83951363, file 9 5055bac8936e03f3d0217786eee2f793d4555806 != 30b80ca176c3                                                      5d86f14a8860c73721f1ca08d25c
Generating RSA key /etc/ssh/ssh_host_key
Generating public/private rsa1 key pair.
Your identification has been saved in /etc/ssh/ssh_host_key.
Your public key has been saved in /etc/ssh/ssh_host_key.pub.
The key fingerprint is:
bf:f4:12:7d:6b:70:7d:ac:8c:38:10:1a:5a:b0:80:b3 root@godnet
The key's' randomart image is:
+--[RSA1 2048]----+
| .               |
|o . .            |
| o . o           |
|E   . o .        |
|     o oS. .   o |
|    . . ... o o +|
|         .oo * o.|
|         .+o. =  |
|          .o..   |
+-----------------+
Generating DSA key /etc/ssh/ssh_host_dsa_key
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
The key fingerprint is:
4b:98:54:20:5f:b9:4e:52:de:01:69:2a:3d:08:67:2b root@godnet
The key's' randomart image is:
+--[ DSA 1024]----+
|    . ..++       |
|  . oo o= .      |
|   + +o= o .     |
|  E +.=o+ .      |
|   . .o=S        |
|       ...       |
|        .        |
|                 |
|                 |
+-----------------+
Generating RSA2 key /etc/ssh/ssh_host_rsa_key
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
The key fingerprint is:
56:ec:33:df:66:ac:75:58:70:93:33:1f:26:a0:fe:b0 root@godnet
The key's' randomart image is:
+--[ RSA 2048]----+
|           .     |
|         .. .   .|
|         .o  ..B.|
|        .o    oo*|
|        So+     o|
|       .  ++ o o |
|         E .. B .|
|             = . |
|            .    |
+-----------------+
Generating ECDSA key /etc/ssh/ssh_host_ecdsa_key
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key.
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub.
The key fingerprint is:
7b:7c:63:0b:6c:60:bc:92:2d:29:87:23:c9:a7:36:be root@godnet
The key's' randomart image is:
+--[ECDSA  256]---+
|                 |
|                 |
|                 |
|       .         |
|        S        |
| . . . = *       |
|  + = * + * +    |
|  o+ + o o + o   |
root@godnet% show |
show: Command not found.
root@godnet% clearte
Setting initial options: .
Starting optional daemons:  usbd.
Doing initial network setup:.
Initial interface configuration:
additional daemons: eventd.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpf                                                      e_drv;/modules;
kld netpfe drv: ifpfed_dialer.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.mips initialization:.
Local package initialization:.
starting local daemons:set cores for group access
.
kern.securelevel: -1 -> 1
Creating JAIL MFS partition...
JAIL MFS partition created
boot.upgrade.uboot="0xBFC00000"
boot.upgrade.loader="0xBFE00000"
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 73391 free (47 frags, 9168 blocks, 0.0% fragmentation)
Thu Jan 16 16:34:02 GMT+4 2014

godnet (ttyu0)

login: root
Password:

--- JUNOS 12.1X45-D15.5 built 2013-09-19 07:42:15 UTC
root@godnet% mount
/dev/da0s1a on / (ufs, local, noatime, read-only)
devfs on /dev (devfs, local, multilabel)
/dev/md0 on /junos (ufs, local, noatime)
/cf/packages on /junos/cf/packages (nullfs, local, noatime)
devfs on /junos/cf/dev (devfs, local, noatime, multilabel)
/dev/md1 on /junos (cd9660, local, noatime, read-only, verified)
/cf on /junos/cf (nullfs, local, noatime)
devfs on /junos/dev/ (devfs, local, noatime, noexec, read-only, multilabel)
/cf/packages on /junos/cf/packages1 (nullfs, local, noatime)
procfs on /proc (procfs, local, noatime)
/dev/bo0s3e on /config (ufs, local, noatime)
/dev/bo0s3f on /cf/var (ufs, local, noatime)
/dev/md2 on /mfs (ufs, asynchronous, local, noatime)
/cf/var/jail on /jail/var (nullfs, local, noatime)
/cf/var/log on /jail/var/log (nullfs, local, noatime)
devfs on /jail/dev (devfs, local, noatime, noexec, read-only, multilabel)
/dev/md3 on /mfs/var/run/utm (ufs, asynchronous, local, noatime)
/dev/md4 on /jail/mfs (ufs, asynchronous, local, noatime)
root@godnet%
root@godnet%
root@godnet% reboot
JWaiting (max 60 seconds) for system process 'vnlru' to stop...done
Waiting (max 60 seconds) for system process 'vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process 'bufdaemon' to stop...done
Waiting (max 60 seconds) for system process 'syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 done

syncing disks... All buffers synced.
Uptime: 1h15m36s
Rebooting...
cpu_reset: Stopping other CPUs


U-Boot 1.1.6-JNPR-2.3 (Build time: Apr 23 2012 - 04:00:06)

SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM:  1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash:  4 MB
USB:   scanning bus for devices...
Root Hub 0: 4 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net:   octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (246924 bytes)
Loading .rodata @ 0x8f03c504 (13944 bytes)
Loading .rodata.str1.4 @ 0x8f03fb7c (16776 bytes)
Loading set_Xcommand_set @ 0x8f043d04 (100 bytes)
Loading .rodata.cst4 @ 0x8f043d68 (20 bytes)
Loading .data @ 0x8f044000 (5608 bytes)
Loading .data.rel.ro @ 0x8f0455e8 (120 bytes)
Loading .data.rel @ 0x8f045660 (136 bytes)
Clearing .bss @ 0x8f0456e8 (11656 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 2.3

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.3
(builder@evenath.juniper.net, Mon Apr 23 04:24:39 UTC 2012)
Memory: 1024MB
[0]Booting from nand-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
Loading /boot/defaults/loader.conf
/kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000e0 ...
init regular console
Primary ICache: Sets 64 Size 128 Asso 4
Primary DCache: Sets 1 Size 128 Asso 64
Secondary DCache: Sets 512 Size 128 Asso 8
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory  = 1073741824 (1024MB)
avail memory = 509661184 (486MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1
cpu0 on motherboard
: CAVIUM's' OCTEON 52XX CPU Rev. 0.8 with no FPU implemented
        L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
        L2 Cache: Size 512kb, 8 way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 3 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682  High Speed Mode, rev 2.00/2.10, addr 3
umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4
dwc1: <Synopsis DWC OTG Controller Driver> on obio0
usb1: <USB Bus for DWC OTG Controller> on dwc1
usb1: USB revision 2.0
uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
cpld0 on obio0
pcib1: <Cavium on-chip PCIe HOST bridge> on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 2 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 1 lanes
pcib1: Initialized controller
pci0: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 0 at device 0.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <serial bus, USB> at device 2.0 (no driver attached)
pci1: <network> at device 7.0 (no driver attached)
pcib0: <Cavium on-chip PCIe HOST bridge> on obio0
pci2: <PCI bus> on pcib0
pci2: <processor> at device 0.0 (no driver attached)
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 4MB> on obio0
Timecounter "mips" frequency 600000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Kingston DT Mini 10 1.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C)
Trying to mount root from ufs:/dev/da0s1a
MFSINIT: Initialising MFSROOT
Process-1 beginning MFSROOT initialization...
Creating MFSROOT...
/dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes.
super-block backups (for fsck -b #) at:
 32, 10272, 20512, 30752
Populating MFSROOT...
Creating symlinks...
Setting up mounts...
Continuing boot from MFSROOT...
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md1...
J
Media check on da0
Automatic reboot in progress...
** /dev/da0s1a (NO WRITE)
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
150 files, 76647 used, 72879 free (47 frags, 9104 blocks, 0.0% fragmentation)
mount reload of '/' failed: Operation not supported

Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
veriexec: cannot update veriexec for /sbin/preinit-main: No such file or directory
veriexec: cannot update veriexec for /sbin/init-mfs-root: No such file or directory
veriexec: cannot update veriexec for /sbin/chroot: No such file or directory
veriexec: cannot update veriexec for /sbin/settty: No such file or directory
Verified junos-12.1X45-D15.5-domestic signed by PackageProduction_12_1_0
Checking integrity of BSD labels:
  s1: Passed
  s2: Passed
  s3: Passed
  s4: Passed
** /dev/bo0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation)
** /dev/bo0s3f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 172329 free (41 frags, 21536 blocks, 0.0% fragmentation)
Checking integrity of licenses:
Checking integrity of configuration:
  rescue.conf.gz: No recovery data
Loading configuration ...
root@godnet% clearfted too much,                        resetting synchronization...
veriexec: fingerprint for dev 83951363, file 9 5055bac8936e03f3d0217786eee2f793d4555806 != 30b80ca176c35d86f14a8860c73721f1ca08d25c
mgd: commit complete
Setting initial options: .
Starting optional daemons:  usbd.
Doing initial network setup:.
Initial interface configuration:
additional daemons: eventd.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpfe_drv;/modules;
kld netpfe drv: ifpfed_dialer.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.mips initialization:.
Local package initialization:.
starting local daemons:set cores for group access
.
kern.securelevel: -1 -> 1
Creating JAIL MFS partition...
JAIL MFS partition created
boot.upgrade.uboot="0xBFC00000"
boot.upgrade.loader="0xBFE00000"
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 73391 free (47 frags, 9168 blocks, 0.0% fragmentation)
Thu Jan 16 17:49:24 GMT+4 2014

godnet (ttyu0)

login: root
Password:

--- JUNOS 12.1X45-D15.5 built 2013-09-19 07:42:15 UTC
root@godnet% start shell
start: Command not found.
root@godnet% bootupgrade -u /boot/uboot -l /boot/loader
Upgrading Loader...
#####################################
Verifying the loader image... OK
Upgrading U-Boot...
###############################################################################
Verifying the new U-Boot image... OK
WARNING: The new boot firmware will take effect when the system is rebooted.
root@godnet% reboot
JWaiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 done

syncing disks... All buffers synced.
Uptime: 10m37s
Rebooting...
cpu_reset: Stopping other CPUs


U-Boot 1.1.6-JNPR-2.5 (Build time: Apr  2 2013 - 12:59:56)

Initializing memory this may take some time...
Measured DDR clock 333.28 MHz
SRX_240_HIGHMEM board revision major:2, minor:52, serial #: AAEV9178
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM:  1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash:  4 MB
USB:   scanning bus for devices...
Root Hub 0: 4 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
PCIe: Initializing port 0
PCIe: Initializing port 1
Boot Media: nand-flash usb
Net:   octeth0
BOARD NOT SUPPORTED
BOARD NOT SUPPORTED
Error: Broadcom Mini-Driver Kit Initialization failed
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f0000a0 (246560 bytes)
Loading .rodata @ 0x8f03c3c0 (14144 bytes)
Loading .reginfo @ 0x8f03fb00 (24 bytes)
Loading .rodata.str1.4 @ 0x8f03fb18 (16516 bytes)
Loading set_Xcommand_set @ 0x8f043b9c (96 bytes)
Loading .rodata.cst4 @ 0x8f043bfc (20 bytes)
Loading .data @ 0x8f044000 (5744 bytes)
Loading .data.rel.ro @ 0x8f045670 (120 bytes)
Loading .data.rel @ 0x8f0456e8 (136 bytes)
Clearing .bss @ 0x8f045770 (11600 bytes)
## Starting application at 0x8f0000a0 ...
Consoles: U-Boot console
Found compatible API, ver. 2.5

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.5
(slt-builder@slt-junos15.juniper.net, Tue Apr  2 12:36:46 PDT 2013)
Memory: 1024MB
[0]Booting from nand-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
Loading /boot/defaults/loader.conf
/kernel data=0xb096a4+0x1345dc syms=[0x4+0x8ae90+0x4+0xc9722]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000e0 ...
init regular console
Primary ICache: Sets 64 Size 128 Asso 4
Primary DCache: Sets 1 Size 128 Asso 64
Secondary DCache: Sets 512 Size 128 Asso 8
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X45-D15.5 #0: 2013-09-19 07:42:15 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/12.1/service/12.1X45-D15.5/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory  = 1073741824 (1024MB)
avail memory = 509661184 (486MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1
cpu0 on motherboard
: CAVIUM's' OCTEON 52XX CPU Rev. 0.8 with no FPU implemented
        L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
        L2 Cache: Size 512kb, 8 way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 3 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682  High Speed Mode, rev 2.00/2.10, addr 3
umass1: Kingston DT Mini 10, rev 2.00/1.00, addr 4
dwc1: <Synopsis DWC OTG Controller Driver> on obio0
usb1: <USB Bus for DWC OTG Controller> on dwc1
usb1: USB revision 2.0
uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
cpld0 on obio0
pcib1: <Cavium on-chip PCIe HOST bridge> on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 2 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 1 lanes
pcib1: Initialized controller
pci0: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 0 at device 0.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <serial bus, USB> at device 2.0 (no driver attached)
pci1: <network> at device 7.0 (no driver attached)
pcib0: <Cavium on-chip PCIe HOST bridge> on obio0
pci2: <PCI bus> on pcib0
pci2: <processor> at device 0.0 (no driver attached)
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 4MB> on obio0
Timecounter "mips" frequency 600000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Kingston DT Mini 10 1.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: 7634MB (15636304 512 byte sectors: 255H 63S/T 973C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s1a
MFSINIT: Initialising MFSROOT
Process-1 beginning MFSROOT initialization...
Creating MFSROOT...
/dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes.
super-block backups (for fsck -b #) at:
 32, 10272, 20512, 30752
Populating MFSROOT...
Creating symlinks...
Setting up mounts...
Continuing boot from MFSROOT...
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md1...
J
Media check on da0
Automatic reboot in progress...
** /dev/da0s1a (NO WRITE)
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
150 files, 76647 used, 72879 free (47 frags, 9104 blocks, 0.0% fragmentation)
mount reload of '/' failed: Operation not supported

Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
veriexec: cannot update veriexec for /sbin/preinit-main: No such file or directory
veriexec: cannot update veriexec for /sbin/init-mfs-root: No such file or directory
veriexec: cannot update veriexec for /sbin/chroot: No such file or directory
veriexec: cannot update veriexec for /sbin/settty: No such file or directory
Verified junos-12.1X45-D15.5-domestic signed by PackageProduction_12_1_0
Checking integrity of BSD labels:
  s1: Passed
  s2: Passed
  s3: Passed
  s4: Passed
** /dev/bo0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 12420 free (20 frags, 1550 blocks, 0.2% fragmentation)
** /dev/bo0s3f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 172278 free (70 frags, 21526 blocks, 0.0% fragmentation)
Checking integrity of licenses:
Checking integrity of configuration:
  rescue.conf.gz: No recovery data
Loading configuration ...
Time and ticks drifted too much,                        resetting synchronization...
veriexec: fingerprint for dev 83951363, file 9 5055bac8936e03f3d0217786eee2f793d4555806 != 30b80ca176c35d86f14a8860c73721f1ca08d25c
mgd: commit complete
Setting initial options: .
Starting optional daemons:  usbd.
Doing initial network setup:.
Initial interface configuration:
additional daemons: eventd.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpfe_drv;/modules;
kld netpfe drv: ifpfed_dialer.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.mips initialization:.
Local package initialization:.
starting local daemons:set cores for group access
.
kern.securelevel: -1 -> 1
Creating JAIL MFS partition...
JAIL MFS partition created
boot.upgrade.uboot="0xBFC00000"
boot.upgrade.loader="0xBFE00000"
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 73391 free (47 frags, 9168 blocks, 0.0% fragmentation)
Thu Jan 16 18:01:08 GMT+4 2014

godnet (ttyu0)

login: umass1: at uhub1 port 2 (addr 4) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached