# generated by Slic3r 0.9.9-dev on Mon Jan 13 21:02:29 2014
avoid_crossing_perimeters = 0
bed_size = 300,300
bed_temperature = 105
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = .9
bridge_speed = 40
brim_width = 4
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\nM140 S0 ; Bed off
external_perimeter_speed = 100%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 2.88
fill_angle = 45
fill_density = .25
fill_pattern = honeycomb
first_layer_bed_temperature = 110
first_layer_extrusion_width = 0
first_layer_height = 115%
first_layer_speed = 15%
first_layer_temperature = 239
g0 = 0
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 100
layer_gcode =
layer_height = .2
max_fan_speed = 0
min_fan_speed = 0
min_print_speed = 15
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 0
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 70
perimeters = 2
post_process =
print_center = 150,170
raft_layers = 0
randomize_start =
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1.1
retract_length_toolchange = 11
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 25
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 70
solid_fill_pattern = concentric
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 100
start_gcode = G28 ; home all axes\nG1 X10 ; move x to clear corner
support_material =
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 65
support_material_threshold = 45
temperature = 233
threads = 4
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 65
top_solid_layers = 3
travel_speed = 120
use_relative_e_distances = 0
vibration_limit = 0
z_offset = -0.19