Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # dmesg
- [ 0.000000] Linux version 2.6.36-android (nikk@probook) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #27 PREEMPT Wed May 9 06:15:16 MSK 2012
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: sun4i
- [ 0.000000] Lichee System fixup
- [ 0.000000] Total Detected Memory: 512MB with 1 banks
- [ 0.000000] fbmem: start=0x5a000000, size=0x02000000
- [ 0.000000] Memory Reserved:
- [ 0.000000] VE: 0x43000000, 0x04a00000
- [ 0.000000] FB: 0x5a000000, 0x02000000
- [ 0.000000] G2D: 0x58000000, 0x01000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 114688
- [ 0.000000] free_area_init_node: node 0, pgdat c06ad2f0, node_mem_map c0769000
- [ 0.000000] DMA zone: 896 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 113792 pages, LIFO batch:31
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandb rw init=/init fbmem=32M@0x5a000000 loglevel=8
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 448MB = 448MB total
- [ 0.000000] Memory: 322244k/322244k available, 136508k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xfee00000 - 0xffe00000 ( 16 MB)
- [ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc002e000 ( 152 kB)
- [ 0.000000] .text : 0xc002e000 - 0xc0678000 (6440 kB)
- [ 0.000000] .data : 0xc0678000 - 0xc06adee0 ( 216 kB)
- [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:96
- [ 0.000000] timer_set_mode: periodic
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Calibrating delay loop... 1005.97 BogoMIPS (lpj=5029888)
- [ 0.240000] pid_max: default: 32768 minimum: 301
- [ 0.250000] Mount-cache hash table entries: 512
- [ 0.250000] CPU: Testing write buffer coherency: ok
- [ 0.250000] devtmpfs: initialized
- [ 0.250000] DRAM Size: 512
- [ 0.250000] regulator: core version 0.5
- [ 0.250000] NET: Registered protocol family 16
- [ 0.250000] No ATAGs?
- [ 0.250000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.250000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
- [ 0.250000] bio: create slab <bio-0> at 0
- [ 0.250000] SCSI subsystem initialized
- [ 0.250000] libata version 3.00 loaded.
- [ 0.250000] usbcore: registered new interface driver usbfs
- [ 0.250000] usbcore: registered new interface driver hub
- [ 0.250000] usbcore: registered new device driver usb
- [ 0.250000] Advanced Linux Sound Architecture Driver Version 1.0.23.
- [ 0.250000] Bluetooth: Core ver 2.15
- [ 0.260000] NET: Registered protocol family 31
- [ 0.260000] Bluetooth: HCI device and connection manager initialized
- [ 0.260000] Bluetooth: HCI socket layer initialized
- [ 0.260000] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.260000] Init eGon pin module V2.0
- [ 0.260000] Switching to clocksource aw 64bits couter
- [ 0.260000] NET: Registered protocol family 2
- [ 0.260000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.260000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.260000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.260000] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.260000] TCP reno registered
- [ 0.260000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.260000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.260000] NET: Registered protocol family 1
- [ 0.260000] RPC: Registered udp transport module.
- [ 0.260000] RPC: Registered tcp transport module.
- [ 0.260000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.260000] sw_sys: init
- [ 0.270000] [pm]aw_pm_init!
- [ 0.270000] ashmem: initialized
- [ 0.280000] NTFS driver 2.1.29 [Flags: R/W].
- [ 0.280000] fuse init (API version 7.15)
- [ 0.280000] msgmni has been set to 629
- [ 0.280000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.280000] io scheduler noop registered
- [ 0.280000] io scheduler deadline registered
- [ 0.280000] io scheduler cfq registered (default)
- [ 0.290000] G2D: drv_g2d_init
- [ 0.290000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
- [ 0.290000] G2D: head:d8000000,tail:d9000000
- [ 0.290000] G2D: Module initialized.major:251
- [ 0.290000] sw-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a sw-uart0
- [ 0.300000] console [ttyS0] enabled
- [ 0.310000] brd: module loaded
- [ 0.310000] loop: module loaded
- [ 0.320000] [NAND]nand driver, init.
- [ 0.320000] [NAND] nand gpio_request
- [ 0.320000] [NAND] nand driver version: 0x2 0x6
- [ 0.330000] nand interrupte register ok
- [ 0.330000] ret of NFC_ChangMode is 0
- [ 0.340000] dma_hdle is 0
- [ 0.340000] dma_hdle is 10000008
- [ 0.370000] The 0 disk name = BOOTFS, class name = DISK, disk size = 32768
- [ 0.380000] The 1 disk name = LROOTFS, class name = DISK, disk size = 65536
- [ 0.390000] The 2 disk name = LSYSTEMFS, class name = DISK, disk size = 524288
- [ 0.390000] The 3 disk name = LDATAFS, class name = DISK, disk size = 2097152
- [ 0.400000] The 4 disk name = MISC, class name = DISK, disk size = 2048
- [ 0.410000] The 5 disk name = LRECOVERYFS, class name = DISK, disk size = 65536
- [ 0.420000] The 6 disk name = LCACHEFS, class name = DISK, disk size = 524288
- [ 0.430000] The 7 disk name = UDISK, class name = DISK, disk size = 12251136
- [ 0.430000] The 7 disk size = 12251136
- [ 0.440000] part total count = 8
- [ 0.440000] nanda:
- [ 0.550000] nandb: unknown partition table
- [ 0.560000] nandc: unknown partition table
- [ 0.670000] nandd: unknown partition table
- [ 0.680000] nande: unknown partition table
- [ 0.680000] nandf: unknown partition table
- [ 0.690000] nandg: unknown partition table
- [ 0.690000] nandh:
- [ 0.700000] [NAND]nand driver, ok.
- [ 0.700000] PPP generic driver version 2.4.2
- [ 0.710000] PPP Deflate Compression module registered
- [ 0.710000] PPP BSD Compression module registered
- [ 0.720000] PPP MPPE Compression module registered
- [ 0.720000] NET: Registered protocol family 24
- [ 0.730000] emac driver is disabled
- [ 0.730000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.740000] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
- [ 0.750000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.750000] ohci_hcd: block sizes: ed 64 td 64
- [ 0.760000] WRN:L1077(drivers/usb/host/sw_hci_sun4i.c):ERR: usb1 sw-ehci1 is disable
- [ 0.770000] WRN:L1085(drivers/usb/host/sw_hci_sun4i.c):ERR: usb1 sw-ohci1 is disable
- [ 0.770000] WRN:L1093(drivers/usb/host/sw_hci_sun4i.c):ERR: usb2 sw-ehci2 is disable
- [ 0.780000] WRN:L1101(drivers/usb/host/sw_hci_sun4i.c):ERR: usb2 sw-ohci2 is disable
- [ 0.790000] Initializing USB Mass Storage driver...
- [ 0.800000] usbcore: registered new interface driver usb-storage
- [ 0.800000] USB Mass Storage support registered.
- [ 0.830000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- [ 0.840000] drivers/usb/core/inode.c: creating file 'devices'
- [ 0.840000] drivers/usb/core/inode.c: creating file '001'
- [ 0.850000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- [ 0.860000] usb usb1: default language 0x0409
- [ 0.860000] usb usb1: udev 1, busnum 1, minor = 0
- [ 0.870000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.870000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.880000] usb usb1: Product: sw_hcd host driver
- [ 0.890000] usb usb1: Manufacturer: Linux 2.6.36-android sw_hcd-hcd
- [ 0.890000] usb usb1: SerialNumber: sw_hcd_host0
- [ 0.900000] usb usb1: usb_probe_device
- [ 0.900000] usb usb1: configuration #1 chosen from 1 choice
- [ 0.910000] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 0.920000] hub 1-0:1.0: usb_probe_interface
- [ 0.920000] hub 1-0:1.0: usb_probe_interface - got id
- [ 0.930000] hub 1-0:1.0: USB hub found
- [ 0.930000] hub 1-0:1.0: 1 port detected
- [ 0.940000] hub 1-0:1.0: standalone hub
- [ 0.940000] hub 1-0:1.0: individual port power switching
- [ 0.950000] hub 1-0:1.0: no over-current protection
- [ 0.950000] hub 1-0:1.0: power on to power good time: 10ms
- [ 0.960000] hub 1-0:1.0: local power source is good
- [ 0.960000] hub 1-0:1.0: enabling power on all ports
- [ 0.970000] drivers/usb/core/inode.c: creating file '001'
- [ 0.980000] android init
- [ 0.980000] android-platform_device_register
- [ 0.980000] ------print_msc_config-----
- [ 0.990000] vendor_id = 0x18d1
- [ 0.990000] mass_storage_id = 0x1
- [ 1.000000] adb_id = 0x2
- [ 1.000000] usb_manufacturer_name = USB Developer
- [ 1.010000] usb_product_name = Android
- [ 1.010000] usb_serial_number = 20080411
- [ 1.020000] msc_vendor_name = Novo7
- [ 1.020000] msc_product_name = Advanced
- [ 1.020000] msc_release = 100
- [ 1.030000] luns = 2
- [ 1.030000] ---------------------------
- [ 1.040000] android_probe pdata: c069573c
- [ 1.040000] WRN:L2671(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.050000] android_bind
- [ 1.050000] android_bind_config
- [ 1.060000] Gadget Android: controller 'sw_usb_udc' not recognized
- [ 1.060000] WRN:L2671(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.070000] android_usb gadget: android_usb ready
- [ 1.080000] f_adb init
- [ 1.080000] android_register_function adb
- [ 1.090000] f_mass_storage init
- [ 1.090000] fsg_probe pdev: c0695898, pdata: c0695760
- [ 1.090000] android_register_function usb_mass_storage
- [ 1.100000] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.110000] android_usb gadget: Number of LUNs=2
- [ 1.110000] lun0: LUN: removable file: (no medium)
- [ 1.120000] lun1: LUN: removable file: (no medium)
- [ 1.120000] adb_bind_config
- [ 1.130000] [ps2]: sw_ps2_init
- [ 1.130000] ps2: cannot find any unsing configuration for 2 ps/2 controller, return directly!
- [ 1.140000] mice: PS/2 mouse device common for all mice
- [ 1.150000] sun4i RTC version 0.1
- [ 1.150000] sun4i-rtc sun4i-rtc: f23_rtc_probe tmp_data = 380239881
- [ 1.160000] using rtc device, rtc, for alarms
- [ 1.160000] sun4i-rtc sun4i-rtc: rtc core: registered rtc as rtc0
- [ 1.170000] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- [ 1.180000] i2c /dev entries driver
- [ 1.180000] ================power===================, status = 0
- [ 1.190000] gsensor: registered bma250 @ addr 0x18
- [ 1.190000] ctp_used == 1.
- [ 1.200000] i2c_info_ctp[0].type is: Goodix-TS, name is Goodix-TS.
- [ 1.200000] i2c: Goodix-TS_ctp_twi_addr is 85, 0x55.
- [ 1.210000] i2c: Goodix-TS_ctp_twi_id is 2.
- [ 1.210000] ================Goodix-TS==============, twi_id = 2, status = 0
- [ 1.220000] i2c: hv_keyboard_twi_addr is 98, 0x62.
- [ 1.230000] i2c: hv_keyboard_twi_id is 2.
- [ 1.230000] ================hv_keyboard==============, twi_id = 2, status = 0
- [ 1.240000] bus num = 0, twi used = 1
- [ 1.240000] bus num = 1, twi used = 1
- [ 1.250000] bus num = 2, twi used = 1
- [ 1.250000] config i2c gpio with gpio_config api
- [ 1.260000] twi0, apb clock = 24000000
- [ 1.260000] _twi_set_clk: clk_n = 0, clk_m = 5
- [ 1.270000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
- [ 1.270000] I2C: i2c-0: AW16XX I2C adapter
- [ 1.280000] **********start************
- [ 1.280000] 0x40
- [ 1.290000] 0xf8
- [ 1.290000] 0x28
- [ 1.290000] 0x0
- [ 1.290000] 0x0
- [ 1.290000] **********end************
- [ 1.300000] twi1, apb clock = 24000000
- [ 1.300000] _twi_set_clk: clk_n = 0, clk_m = 11
- [ 1.310000] I2C: i2c-1: AW16XX I2C adapter
- [ 1.310000] **********start************
- [ 1.320000] 0x40
- [ 1.320000] 0xf8
- [ 1.320000] 0x58
- [ 1.320000] 0x0
- [ 1.320000] 0x0
- [ 1.330000] **********end************
- [ 1.330000] twi2, apb clock = 24000000
- [ 1.330000] _twi_set_clk: clk_n = 0, clk_m = 11
- [ 1.340000] I2C: i2c-2: AW16XX I2C adapter
- [ 1.340000] **********start************
- [ 1.350000] 0x40
- [ 1.350000] 0xf8
- [ 1.350000] 0x58
- [ 1.360000] 0x0
- [ 1.360000] 0x0
- [ 1.360000] **********end************
- [ 1.360000] lirc_dev: IR Remote Control driver registered, major 250
- [ 1.370000] IR NEC protocol handler initialized
- [ 1.380000] IR RC5(x) protocol handler initialized
- [ 1.380000] IR RC6 protocol handler initialized
- [ 1.390000] IR JVC protocol handler initialized
- [ 1.390000] IR Sony protocol handler initialized
- [ 1.400000] IR LIRC bridge handler initialized
- [ 1.400000] Linux video capture interface: v2.00
- [ 1.410000] [cedar dev]: install start!!!
- [ 1.410000] [cedar dev]: install end!!!
- [ 1.420000] [ace_drv] init end!!!
- [ 1.420000] [pa_drv] start!!!
- [ 1.420000] [pa_drv] init end!!!
- [ 1.430000] regulator: axp20_ldo1: 1300 mV
- [ 1.430000] regulator: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
- [ 1.440000] regulator: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
- [ 1.450000] regulator: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
- [ 1.460000] regulator: axp20_buck2: 700 <--> 2275 mV at 1400 mV
- [ 1.460000] regulator: axp20_buck3: 700 <--> 3500 mV at 1250 mV
- [ 1.470000] regulator: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
- [ 1.480000] input: axp20-supplyer as /devices/platform/aw16xx-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
- [ 1.500000] device-mapper: uevent: version 1.0.3
- [ 1.510000] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
- [ 1.520000] device-mapper: multipath: version 1.1.1 loaded
- [ 1.520000] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.530000] Bluetooth: HCI UART driver ver 2.2
- [ 1.540000] Bluetooth: HCI H4 protocol initialized
- [ 1.540000] Bluetooth: HCI BCSP protocol initialized
- [ 1.550000] Bluetooth: HCILL protocol initialized
- [ 1.550000] Bluetooth: HCIATH3K protocol initialized
- [ 1.560000] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
- [ 1.560000] usbcore: registered new interface driver bcm203x
- [ 1.570000] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
- [ 1.580000] usbcore: registered new interface driver bpa10x
- [ 1.580000] Bluetooth: BlueFRITZ! USB driver ver 1.2
- [ 1.590000] usbcore: registered new interface driver bfusb
- [ 1.590000] [wifi]: Select sdio wifi: swl-n20 !!
- [ 1.600000] [mmc_pm]: SDIO card gpio init is OK !!
- [ 1.610000] [mmc]: awsmc_init
- [ 1.610000] [mmc]: awsmc controller unsing config sdc0 1, sdc1 0, sdc2 0, sdc3 1
- [ 1.620000] [mmc]: awsmc.0: pdev->name: awsmc, pdev->id: 00000000
- [ 1.620000] [mmc]: smc 0, source = sdram_pll_p, src_clk = 360000000, mclk 40000000,
- [ 1.630000] [mmc]: MMC Driver init host 0
- [ 1.640000] [mmc]: sdc 0 idma des address d9a84000
- [ 1.640000] [mmc]: mmc 0 suspend pins
- [ 1.650000] [mmc]: awsmc.0: Initialisation Done. ret 0
- [ 1.650000] [mmc]: awsmc.3: pdev->name: awsmc, pdev->id: 00000003
- [ 1.660000] [mmc]: smc 3, source = sdram_pll_p, src_clk = 360000000, mclk 90000000,
- [ 1.670000] [mmc]: MMC Driver init host 3
- [ 1.670000] [mmc]: sdc 3 idma des address d9a8c000
- [ 1.680000] [mmc]: mmc 3 suspend pins
- [ 1.680000] [mmc]: awsmc.3: Initialisation Done. ret 0
- [ 1.690000] usbcore: registered new interface driver usbhid
- [ 1.690000] usbhid: USB HID core driver
- [ 1.700000] logger: created 64K log 'log_main'
- [ 1.700000] logger: created 256K log 'log_events'
- [ 1.710000] logger: created 64K log 'log_radio'
- [ 1.720000] logger: created 64K log 'log_system'
- [ 1.720000] enter sun4i Audio codec!!!
- [ 1.730000] sun4i audio support initialized
- [ 1.730000] baseaddr = dc842c00
- [ 1.730000] audiocodec_adap_awxx_init: script_parser_fetch err.
- [ 1.740000] sun4i Audio codec successfully loaded..
- [ 1.750000] No device for DAI sun4i-hdmiaudio
- [ 1.750000] No device for DAI snd-HDMI
- [ 1.760000] asoc: snd-HDMI <-> sun4i-hdmiaudio mapping ok
- [ 1.760000] [SPDIF]sun4i-spdif cannot find any using configuration for controllers, return directly!
- [ 1.770000] [SPDIF]sndspdif cannot find any using configuration for controllers, return directly!
- [ 1.780000] [SPDIF]sun4i_sndspdif cannot find any using configuration for controllers, return directly!
- [ 1.790000] ALSA device list:
- [ 1.800000] #0: sun4i-CODEC Audio Codec
- [ 1.800000] #1: sun4i-HDMI (snd-HDMI)
- [ 1.810000] nf_conntrack version 0.5.0 (5035 buckets, 20140 max)
- [ 1.810000] IPv4 over IPv4 tunneling driver
- [ 1.820000] GRE over IPv4 tunneling driver
- [ 1.820000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.840000] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
- [ 1.840000] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
- [ 1.850000] TCP cubic registered
- [ 1.850000] NET: Registered protocol family 10
- [ 1.870000] IPv6 over IPv4 tunneling driver
- [ 1.870000] NET: Registered protocol family 17
- [ 1.880000] NET: Registered protocol family 15
- [ 1.890000] Bluetooth: L2CAP ver 2.15
- [ 1.890000] Bluetooth: L2CAP socket layer initialized
- [ 1.900000] Bluetooth: SCO (Voice Link) ver 0.6
- [ 1.900000] Bluetooth: SCO socket layer initialized
- [ 1.910000] Bluetooth: RFCOMM TTY layer initialized
- [ 1.910000] Bluetooth: RFCOMM socket layer initialized
- [ 1.920000] Bluetooth: RFCOMM ver 1.11
- [ 1.920000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.930000] Bluetooth: BNEP filters: protocol multicast
- [ 1.930000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.940000] L2TP core driver, V2.0
- [ 1.940000] PPPoL2TP kernel driver, V2.0
- [ 1.950000] lib80211: common routines for IEEE802.11 drivers
- [ 1.960000] lib80211_crypt: registered algorithm 'NULL'
- [ 1.970000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 1.980000] regulator_init_complete: incomplete constraints, leaving axp20_buck3 on
- [ 1.980000] regulator_init_complete: incomplete constraints, leaving axp20_buck2 on
- [ 2.000000] regulator_init_complete: incomplete constraints, leaving axp20_ldo4 on
- [ 2.000000] regulator_init_complete: incomplete constraints, leaving axp20_ldo3 on
- [ 2.020000] regulator_init_complete: incomplete constraints, leaving axp20_ldo2 on
- [ 2.020000] regulator_init_complete: incomplete constraints, leaving axp20_ldo1 on
- [ 2.030000] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
- [ 2.050000] sun4i-rtc sun4i-rtc: f23_rtc_gettime
- [ 2.050000] sun4i-rtc sun4i-rtc: read time 2012-5-9 4:25:39
- [ 2.060000] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
- [ 2.060000] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 2.080000] sun4i-rtc sun4i-rtc: setting system clock to 2012-05-09 04:25:39 UTC (1336537539)
- [ 2.170000] EXT3-fs (nandb): error: couldn't mount because of unsupported optional features (40)
- [ 2.180000] EXT2-fs (nandb): error: couldn't mount because of unsupported optional features (44)
- [ 2.240000] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 2.240000] EXT4-fs (nandb): recovery complete
- [ 2.250000] EXT4-fs (nandb): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.260000] VFS: Mounted root (ext4 filesystem) on device 93:8.
- [ 2.360000] usb 1-1: new high speed USB device using sw_hcd_host0 and address 2
- [ 2.380000] devtmpfs: mounted
- [ 2.380000] Freeing init memory: 152K
- [ 2.500000] usb 1-1: udev 2, busnum 1, minor = 1
- [ 2.500000] usb 1-1: New USB device found, idVendor=2001, idProduct=f103
- [ 2.510000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.520000] usb 1-1: usb_probe_device
- [ 2.520000] usb 1-1: configuration #1 chosen from 1 choice
- [ 2.530000] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 2.530000] hub 1-1:1.0: usb_probe_interface
- [ 2.540000] hub 1-1:1.0: usb_probe_interface - got id
- [ 2.540000] hub 1-1:1.0: USB hub found
- [ 2.550000] hub 1-1:1.0: 7 ports detected
- [ 2.550000] hub 1-1:1.0: standalone hub
- [ 2.560000] hub 1-1:1.0: individual port power switching
- [ 2.560000] hub 1-1:1.0: individual port over-current protection
- [ 2.570000] hub 1-1:1.0: Single TT
- [ 2.570000] hub 1-1:1.0: TT requires at most 16 FS bit times (1332 ns)
- [ 2.580000] hub 1-1:1.0: power on to power good time: 100ms
- [ 2.590000] hub 1-1:1.0: local power source is good
- [ 2.600000] hub 1-1:1.0: enabling power on all ports
- [ 2.600000] drivers/usb/core/inode.c: creating file '002'
- [ 2.610000] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
- [ 2.610000] hub 1-0:1.0: port 1 enable change, status 00000503
- [ 2.700000] hub 1-1:1.0: port 1: status 0101 change 0001
- [ 2.700000] hub 1-1:1.0: port 4: status 0101 change 0001
- [ 2.720000] hub 1-1:1.0: port 5: status 0101 change 0001
- [ 2.720000] hub 1-1:1.0: port 6: status 0101 change 0001
- [ 2.740000] hub 1-1:1.0: port 7: status 0101 change 0001
- [ 2.840000] hub 1-1:1.0: state 7 ports 7 chg 00f2 evt 0000
- [ 2.840000] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
- [ 2.910000] [LCD] lcd_module_init
- [ 2.930000] usb 1-1.1: new high speed USB device using sw_hcd_host0 and address 3
- [ 3.030000] usb 1-1.1: default language 0x0409
- [ 3.030000] usb 1-1.1: udev 3, busnum 1, minor = 2
- [ 3.040000] usb 1-1.1: New USB device found, idVendor=1b24, idProduct=4001
- [ 3.040000] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.050000] usb 1-1.1: Product: Bootloader USB
- [ 3.060000] usb 1-1.1: Manufacturer: Telegent Systems
- [ 3.060000] usb 1-1.1: usb_probe_device
- [ 3.070000] usb 1-1.1: configuration #1 chosen from 1 choice
- [ 3.070000] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
- [ 3.080000] drivers/usb/core/inode.c: creating file '003'
- [ 3.090000] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
- [ 3.170000] usb 1-1.4: new full speed USB device using sw_hcd_host0 and address 4
- [ 3.270000] usb 1-1.4: udev 4, busnum 1, minor = 3
- [ 3.270000] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3000
- [ 3.280000] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.290000] usb 1-1.4: usb_probe_device
- [ 3.290000] usb 1-1.4: configuration #1 chosen from 1 choice
- [ 3.300000] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
- [ 3.300000] drivers/usb/core/inode.c: creating file '004'
- [ 3.310000] hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
- [ 3.400000] usb 1-1.5: new full speed USB device using sw_hcd_host0 and address 5
- [ 3.500000] usb 1-1.5: ep0 maxpacket = 8
- [ 3.500000] usb 1-1.5: skipped 4 descriptors after interface
- [ 3.510000] usb 1-1.5: skipped 2 descriptors after interface
- [ 3.510000] usb 1-1.5: skipped 1 descriptor after endpoint
- [ 3.520000] usb 1-1.5: skipped 2 descriptors after interface
- [ 3.530000] usb 1-1.5: skipped 1 descriptor after endpoint
- [ 3.530000] usb 1-1.5: skipped 1 descriptor after interface
- [ 3.540000] usb 1-1.5: default language 0x0409
- [ 3.540000] usb 1-1.5: udev 5, busnum 1, minor = 4
- [ 3.550000] usb 1-1.5: New USB device found, idVendor=08bb, idProduct=2704
- [ 3.560000] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.570000] usb 1-1.5: Product: USB Audio DAC
- [ 3.570000] usb 1-1.5: Manufacturer: Burr-Brown from TI
- [ 3.580000] usb 1-1.5: usb_probe_device
- [ 3.590000] usb 1-1.5: configuration #1 chosen from 1 choice
- [ 3.590000] usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0)
- [ 3.600000] usb 1-1.5: adding 1-1.5:1.1 (config #1, interface 1)
- [ 3.610000] usb 1-1.5: adding 1-1.5:1.2 (config #1, interface 2)
- [ 3.610000] usbhid 1-1.5:1.2: usb_probe_interface
- [ 3.620000] usbhid 1-1.5:1.2: usb_probe_interface - got id
- [ 3.630000] input: Burr-Brown from TI USB Audio DAC as /devices/platform/sw_hcd_host0/usb1/1-1/1-1.5/1-1.5:1.2/input/input1
- [ 3.640000] generic-usb 0003:08BB:2704.0001: input: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-sw_hcd_host0-1.5/input2
- [ 3.650000] drivers/usb/core/inode.c: creating file '005'
- [ 3.650000] hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
- [ 3.690000] init: width = 800
- [ 3.690000] init: height = 480
- [ 3.690000] init: s.st_size = 1536000
- [ 3.740000] usb 1-1.6: new full speed USB device using sw_hcd_host0 and address 6
- [ 3.810000] init: do_mount
- [ 3.820000] init: do_mount
- [ 3.820000] init: do_mount
- [ 3.820000] init: do_mount
- [ 3.830000] init: do_mount
- [ 3.830000] init: do_mount
- [ 3.840000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 3.840000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 3.850000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 3.850000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 3.860000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 3.860000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 3.870000] usb 1-1.6: default language 0x0409
- [ 3.880000] usb 1-1.6: udev 6, busnum 1, minor = 5
- [ 3.880000] usb 1-1.6: New USB device found, idVendor=0e8d, idProduct=3329
- [ 3.890000] usb 1-1.6: New USB device strings: Mfr=3, Product=4, SerialNumber=0
- [ 3.900000] usb 1-1.6: Product: GPS Receiver
- [ 3.900000] usb 1-1.6: Manufacturer: MTK
- [ 3.910000] usb 1-1.6: usb_probe_device
- [ 3.910000] usb 1-1.6: configuration #1 chosen from 1 choice
- [ 3.920000] usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
- [ 3.920000] usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1)
- [ 3.930000] drivers/usb/core/inode.c: creating file '006'
- [ 3.940000] hub 1-1:1.0: port 7, status 0101, change 0000, 12 Mb/s
- [ 3.950000] EXT4-fs (nandc): barriers disabled
- [ 3.950000] EXT4-fs (nandc): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 3.960000] init: do_mount
- [ 3.980000] EXT4-fs (nandd): barriers disabled
- [ 4.030000] usb 1-1.7: new full speed USB device using sw_hcd_host0 and address 7
- [ 4.130000] usb 1-1.7: default language 0x0409
- [ 4.130000] usb 1-1.7: udev 7, busnum 1, minor = 6
- [ 4.140000] usb 1-1.7: New USB device found, idVendor=067b, idProduct=2303
- [ 4.140000] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.150000] usb 1-1.7: Product: USB-Serial Controller
- [ 4.160000] usb 1-1.7: Manufacturer: Prolific Technology Inc.
- [ 4.160000] usb 1-1.7: usb_probe_device
- [ 4.170000] usb 1-1.7: configuration #1 chosen from 1 choice
- [ 4.180000] usb 1-1.7: adding 1-1.7:1.0 (config #1, interface 0)
- [ 4.180000] drivers/usb/core/inode.c: creating file '007'
- [ 4.190000] hub 1-1:1.0: state 7 ports 7 chg 0000 evt 0080
- [ 8.680000] hub 1-1:1.0: state 7 ports 7 chg 0000 evt 0080
- [ 8.690000] hub 1-1:1.0: port 7, status 0100, change 0001, 12 Mb/s
- [ 8.700000] usb 1-1.7: USB disconnect, address 7
- [ 8.700000] usb 1-1.7: unregistering device
- [ 8.710000] usb 1-1.7: usb_disable_device nuking all URBs
- [ 8.710000] usb 1-1.7: unregistering interface 1-1.7:1.0
- [ 8.880000] hub 1-1:1.0: debounce: port 7: total 100ms stable 100ms status 0x100
- [ 13.450000] JBD2: Disabling barriers on nandb-8, not supported by device
- [ 14.110000] EXT4-fs (nandd): recovery complete
- [ 14.120000] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 14.130000] init: do_umount: /data
- [ 14.290000] EXT4-fs (nandd): barriers disabled
- [ 14.300000] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,barrier=0
- [ 14.310000] init: do_mount
- [ 14.320000] EXT4-fs (nandg): barriers disabled
- [ 14.990000] EXT4-fs (nandg): recovery complete
- [ 15.000000] EXT4-fs (nandg): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 15.000000] init: do_mount
- [ 15.010000] init: dont need format /dev/block/nandh
- [ 15.090000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 15.100000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- [ 15.820000] goodix_ts_init
- [ 15.830000] goodix_ts: revert_x_flag = 0.
- [ 15.830000] goodix_ts: revert_y_flag = 0.
- [ 15.830000] ============== GT801 Probe =============
- [ 16.160000] Begin goodix i2c test
- [ 16.170000] ========== goodix i2c test ok ==========
- [ 16.170000] input: gt80x as /devices/virtual/input/input2
- [ 16.230000] ======== register_early_suspend ========
- [ 16.230000] Read Goodix version
- [ 16.290000] Goodix-TS 2-0055: GT80X Version: GT801_1R07_2011081501_Goodix_Tech
- [ 16.310000] =============== Probe OK ===============
- [ 16.330000] input: sun4i-keyboard as /devices/virtual/input/input3
- [ 16.340000] ==register_early_suspend =
- [ 16.360000] =============== HV Init ================
- [ 16.370000] ========= hv_keypad_probe Begin ========
- [ 16.370000] input: hv_keypad as /devices/virtual/input/input4
- [ 16.380000] hv_i2c_txdata i2c write error: -70
- [ 16.380000] ========= probe ========= over =========
- [ 16.430000] UMP: UMP device driver loaded
- [ 16.580000] mali: use config clk_div 3
- [ 16.580000] mali: clk_div 3
- [ 16.600000] Mali: mali clock set completed, clock is 320000000 Mhz
- [ 16.610000] mali: use config clk_div 3
- [ 16.610000] mali: clk_div 3
- [ 16.630000] Mali: mali clock set completed, clock is 320000000 Mhz
- [ 16.630000] Mali: Mali device driver loaded
- [ 16.660000] hello, sun4i_vibrator init
- [ 16.700000] Bosch Sensortec Device detected!
- [ 16.700000] BMA250 registered I2C driver!
- [ 16.750000] input: bma250 as /devices/virtual/input/input5
- [ 16.890000] [CSI]Welcome to CSI driver
- [ 16.900000] [CSI_ERR]fetch csi1 csi_flash_pol from sys_config failed
- [ 16.910000] [CSI]registered sub device,input_num = 0
- [ 16.910000] [CSI]power on and power off camera!
- [ 17.040000] [CSI]V4L2 device registered as video1
- [ 17.080000] [CSI]Welcome to CSI driver
- [ 17.080000] [CSI_ERR]fetch csi0 csi_flash_pol from sys_config failed
- [ 17.090000] [CSI]registered sub device,input_num = 0
- [ 17.100000] [CSI]power on and power off camera!
- [ 17.220000] [CSI]V4L2 device registered as video0
- [ 17.300000] usbcore: registered new interface driver asix
- [ 17.330000] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
- [ 17.340000] usbcore: registered new interface driver rtl8150
- [ 17.380000] usbcore: registered new interface driver qf9700
- [ 17.410000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 17.430000] Bluetooth: Atheros AR30xx firmware driver ver 1.0
- [ 17.440000] ath3k 1-1.4:1.0: usb_probe_interface
- [ 17.450000] ath3k 1-1.4:1.0: usb_probe_interface - got id
- [ 17.750000] usbcore: registered new interface driver ath3k
- [ 17.800000] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 17.800000] usbcore: registered new interface driver btusb
- [ 17.810000] init: do_mount
- [ 17.900000] hub 1-1:1.0: state 7 ports 7 chg 0000 evt 0010
- [ 17.900000] hub 1-1:1.0: port 4, status 0100, change 0001, 12 Mb/s
- [ 17.910000] usb 1-1.4: USB disconnect, address 4
- [ 17.920000] usb 1-1.4: unregistering device
- [ 17.920000] usb 1-1.4: usb_disable_device nuking all URBs
- [ 17.930000] usb 1-1.4: unregistering interface 1-1.4:1.0
- [ 18.090000] hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
- [ 18.920000] hub 1-1:1.0: state 7 ports 7 chg 0000 evt 0010
- [ 18.930000] hub 1-1:1.0: port 4, status 0101, change 0001, 12 Mb/s
- [ 19.100000] hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
- [ 19.180000] usb 1-1.4: new full speed USB device using sw_hcd_host0 and address 8
- [ 19.280000] usb 1-1.4: udev 8, busnum 1, minor = 7
- [ 19.280000] usb 1-1.4: New USB device found, idVendor=0cf3, idProduct=3005
- [ 19.290000] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 19.300000] usb 1-1.4: usb_probe_device
- [ 19.300000] usb 1-1.4: configuration #1 chosen from 1 choice
- [ 19.310000] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
- [ 19.320000] btusb 1-1.4:1.0: usb_probe_interface
- [ 19.320000] btusb 1-1.4:1.0: usb_probe_interface - got id
- [ 19.330000] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1)
- [ 19.340000] drivers/usb/core/inode.c: creating file '008'
- [ 19.940000] EXT4-fs (nandc): re-mounted. Opts: (null)
- [ 19.940000] init: do_mount
- [ 22.000000] EXT4-fs (nandb): re-mounted. Opts: (null)
- [ 22.060000] input: sun4i-ir as /devices/virtual/input/input6
- [ 22.070000] IR Initial OK
- [ 22.290000] snd-usb-audio 1-1.5:1.0: usb_probe_interface
- [ 22.310000] snd-usb-audio 1-1.5:1.0: usb_probe_interface - got id
- [ 22.310000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.310000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.320000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.320000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.330000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.330000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.340000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.340000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.350000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.350000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.360000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.360000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.370000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.370000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.380000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.380000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.390000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.390000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.400000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.400000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.410000] usbcore: registered new interface driver snd-usb-audio
- [ 22.430000] pl2303: Unknown symbol usb_serial_handle_sysrq_char (err 0)
- [ 22.440000] pl2303: Unknown symbol usb_serial_disconnect (err 0)
- [ 22.440000] pl2303: Unknown symbol usb_serial_generic_close (err 0)
- [ 22.450000] pl2303: Unknown symbol usb_serial_suspend (err 0)
- [ 22.460000] pl2303: Unknown symbol usb_serial_handle_break (err 0)
- [ 22.470000] pl2303: Unknown symbol usb_serial_generic_submit_read_urb (err 0)
- [ 22.480000] pl2303: Unknown symbol usb_serial_probe (err 0)
- [ 22.490000] pl2303: Unknown symbol usb_serial_register (err 0)
- [ 22.490000] pl2303: Unknown symbol usb_serial_deregister (err 0)
- [ 22.500000] pl2303: Unknown symbol usb_serial_resume (err 0)
- [ 22.530000] cdc_acm 1-1.6:1.0: usb_probe_interface
- [ 22.540000] cdc_acm 1-1.6:1.0: usb_probe_interface - got id
- [ 22.550000] cdc_acm 1-1.6:1.1: usb_probe_interface
- [ 22.550000] cdc_acm 1-1.6:1.1: usb_probe_interface - got id
- [ 22.560000] cdc_acm 1-1.6:1.1: ttyACM0: USB ACM device
- [ 22.560000] usbcore: registered new interface driver cdc_acm
- [ 22.570000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 22.820000] poseidon 1-1.1:1.0: usb_probe_interface
- [ 22.840000] poseidon 1-1.1:1.0: usb_probe_interface - got id
- [ 22.840000] WRN:L1719(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, STALLING ENDPOINT
- [ 22.840000] WRN:L1738(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_h_ep0_irq, ep aborting
- [ 22.870000] [ firmware_download : 237 ] download size : 512
- [ 22.890000] usbcore: registered new interface driver poseidon
- [ 22.920000] enabling adb
- [ 22.930000] adb_open
- [ 23.400000] hub 1-1:1.0: state 7 ports 7 chg 0000 evt 0002
- [ 23.420000] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s
- [ 23.420000] usb 1-1.1: USB disconnect, address 3
- [ 23.440000] usb 1-1.1: unregistering device
- [ 23.440000] usb 1-1.1: usb_disable_device nuking all URBs
- [ 23.460000] usb 1-1.1: unregistering interface 1-1.1:1.0
- [ 23.620000] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
- [ 23.700000] usb 1-1.1: new high speed USB device using sw_hcd_host0 and address 9
- [ 23.800000] usb 1-1.1: default language 0x0409
- [ 23.800000] usb 1-1.1: udev 9, busnum 1, minor = 8
- [ 23.820000] usb 1-1.1: New USB device found, idVendor=1b24, idProduct=4001
- [ 23.820000] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 23.840000] usb 1-1.1: Product: TLG2300 USB
- [ 23.840000] usb 1-1.1: Manufacturer: Telegent Systems
- [ 23.850000] usb 1-1.1: usb_probe_device
- [ 23.850000] usb 1-1.1: configuration #1 chosen from 1 choice
- [ 23.860000] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
- [ 23.870000] poseidon 1-1.1:1.0: usb_probe_interface
- [ 23.870000] poseidon 1-1.1:1.0: usb_probe_interface - got id
- [ 23.880000] [ pd_video_init : 1662 ] register VIDEO/VBI devices
- [ 23.890000] DVB: registering new adapter (Poseidon dvbt adapter)
- [ 23.900000] DVB: registering adapter 0 frontend 0 (Poseidon DVB-T)...
- [ 23.910000] drivers/usb/core/inode.c: creating file '009'
- [ 23.910000] hub 1-1:1.0: state 7 ports 7 chg 0000 evt 0002
- [ 26.330000] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- [ 63.500000] request_suspend_state: wakeup (3->0) at 64195204109 (2012-05-09 04:26:41.089176335 UTC)
- [ 63.550000] init: no such service 'hciattach'
- [ 63.810000] [nano]: Wifi Power UP !!
- [ 63.810000] [mmc]: mmc 3 resume pins
- [ 63.850000] [mmc]: sdxc_request_done(L973): smc 3 err, cmd 52, RTO !!
- [ 63.860000] [mmc]: sdxc_request_done(L973): smc 3 err, cmd 52, RTO !!
- [ 63.870000] [mmc]: sdxc_request_done(L973): smc 3 err, cmd 8, RTO !!
- [ 63.920000] mmc1: new SDIO card at address 0001
- [ 63.990000] mmc1:0001:1: sdio_nrx_probe (class 0, vendor 03bb, device 200b), target is NRX600
- [ 64.070000] mmc1:0001:1: Initial clock 25MHz, timing mode 0, bus_width 2
- [ 64.310000] mmc1:0001:1: Clock switched to 45MHz
- [ 64.420000] [nano] read mib file: /drv/mib.bin failed
- [ 64.460000] Find file /data/misc/mac.random
- [ 64.460000] [nano] mac: 84:5d:d7:bd:96:ea
- [ 64.800000] mmc1:0001:1: Clock switched to 45MHz
- [ 65.500000] mmc1:0001:1, Registered interface wlan0
- [ 65.500000] [nano] NULL BSSID sent
- [ 66.910000] WRN:L2701(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_schedule, best_end
- [ 66.910000] WRN:L2947(drivers/usb/sun4i_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_schedule failed
- [ 67.030000] tty_port_close_start: tty->count = 1 port count = 0.
- [ 67.810000] [nano] BSSID sent - 0x00:0x1a:0x92:0xbb:0x71:0xd7
- [ 69.360000] EXT4-fs (nandc): re-mounted. Opts: (null)
- [ 69.610000] EXT4-fs (nandc): re-mounted. Opts: (null)
- [ 76.450000] wlan0: no IPv6 routers present
- [ 86.120000] sun4i-rtc sun4i-rtc: set time 2012-5-9 4:27:3
- [ 105.220000] init: untracked pid 551 exited
- [ 117.820000] sun4i-rtc sun4i-rtc: set time 2012-5-9 4:27:35
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement