Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
- [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
- [ 0.000000] [0: swapper: 0] Linux version 3.0.72-cyanogenmod-ga23deb7-dirty (gpf@gpf-Satellite-A305D) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 25 22:15:12 MST 2013
- [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- [ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA
- [ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized
- [ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized
- [ 0.000000] [0: swapper: 0] memory pool 2 (start 40400000 size 2a00000) initialized
- [ 0.000000] [0: swapper: 0] memory pool 4 (start 79400000 size c00000) initialized
- [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536
- [ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
- [ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
- [ 0.000000] [0: swapper: 0] On node 0 totalpages: 201472
- [ 0.000000] [0: swapper: 0] free_area_init_node: node 0, pgdat c0cf9820, node_mem_map c1855000
- [ 0.000000] [0: swapper: 0] Normal zone: 832 pages used for memmap
- [ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved
- [ 0.000000] [0: swapper: 0] Normal zone: 105664 pages, LIFO batch:31
- [ 0.000000] [0: swapper: 0] HighMem zone: 768 pages used for memmap
- [ 0.000000] [0: swapper: 0] HighMem zone: 94208 pages, LIFO batch:31
- [ 0.000000] [0: swapper: 0] allocating 20586496 bytes at c1e99000 (49e99000 physical) for fb
- [ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c323e000 s9472 r8192 d15104 u32768
- [ 0.000000] [0: swapper: 0] pcpu-alloc: s9472 r8192 d15104 u32768 alloc=8*4096
- [ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 199872
- [ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true zcache sec_log=0x80000@0x40270008 sec_dbg=0x100000@0x402f000c sec_debug.reset_reason=0x1a2b3c00 pmem_sf_addr=0x7a000000 pmem_sf_size=0x6000000 console=null sec_debug.enable=0 sec_debug.enable_user=0 appsbark=0 msm_watchdog.enable=1 msm_watchdog.bark_time=30 msm_watchdog.bite_time=31 vmalloc=512m hw_rev=12 lpj=67702 androidboot.emmc=true androidboot.serialno=32c245ca androidboot.baseband=csfb console=tty1 datapart=/dev/mmcblk0p25
- [ 0.000000] [0: swapper: 0] (sec_dbg_setup)
- [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x402f000c
- [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
- [ 0.000000] hw_rev_setup : HW rev value is intialized first
- [ 0.000000] HW rev value : 0xC
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 760MB 27MB = 787MB total
- [ 0.000000] Memory: 756688k/756688k available, 62512k reserved, 379904K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- [ 0.000000] vmalloc : 0xda800000 - 0xfa000000 ( 504 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xda000000 ( 416 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc0056000 ( 312 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0b744f8 (10706 kB)
- [ 0.000000] .data : 0xc0c00000 - 0xc0cfbde0 (1008 kB)
- [ 0.000000] .bss : 0xc0cfbe04 - 0xc1356c6c (6508 kB)
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:855
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001159] Calibrating delay loop (skipped) preset value.. 13.54 BogoMIPS (lpj=67702)
- [ 0.001220] pid_max: default: 32768 minimum: 301
- [ 0.001770] Mount-cache hash table entries: 512
- [ 0.003082] Initializing cgroup subsys cpuacct
- [ 0.003204] Initializing cgroup subsys freezer
- [ 0.003265] CPU: Testing write buffer coherency: ok
- [ 0.003631] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
- [ 0.036041] CPU1: Booted secondary processor
- [ 0.045928] Brought up 2 CPUs
- [ 0.045989] SMP: Total of 2 processors activated (27.08 BogoMIPS).
- [ 0.046783] devtmpfs: initialized
- [ 0.058685] print_constraints: dummy:
- [ 0.058776] rdev_init_debugfs: Error-Bad Function Input
- [ 0.059143] NET: Registered protocol family 16
- [ 0.059326] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.060882] (sec_get_lpm_mode) 1a2b3c00
- [ 0.060913] (sec_get_lpm_mode) 0
- [ 0.060943] (sec_debug_init)
- [ 0.060943] (sec_debug_init) reset_reason : 0x1a2b3c00
- [ 0.061004] msm_rpm_init: RPM firmware 2.0.67419
- [ 0.061614] saw_probe: id=0, name=8901_s0
- [ 0.061950] saw_probe: id=1, name=8901_s1
- [ 0.063201] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
- [ 0.063293] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
- [ 0.063323] rcg_clk_handoff: sdc1_clk rate=48000000
- [ 0.063385] rcg_clk_handoff: dsi_byte_clk rate=1
- [ 0.063446] rcg_clk_handoff: mdp_clk rate=200000000
- [ 0.063568] rcg_clk_handoff: pixel_mdp_clk rate=53990000
- [ 0.065093] ACPU PVS: Slow
- [ 0.065155] Max ACPU freq: 1512000 KHz
- [ 0.070770] CPU0: 23 scaling frequencies supported.
- [ 0.070800] CPU1: 23 scaling frequencies supported.
- [ 0.071258] LTE_switch_init!
- [ 0.071319] LTE_switch_init end!
- [ 0.072448] pm8058_probe: PMIC revision: E3
- [ 0.073486] pm_gpio_probe: OK: base=173, ngpio=40
- [ 0.073669] pm8xxx_mpp_probe: OK: base=213, ngpio=12
- [ 0.074737] pm8901_probe: PMIC REVISION = F4
- [ 0.075073] pm8xxx_mpp_probe: OK: base=225, ngpio=4
- [ 0.086395] ram_console: got buffer at 77800000, size 100000
- [ 0.086517] ram_console: found existing buffer, size 50173, start 50173
- [ 0.241668] console [ram-1] enabled
- [ 0.242950] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
- [ 0.243652] msm_snddev_init
- [ 0.254791] [TSP] tsp_mxt540e_power_init: success
- [ 0.254943] [E-PEN] wacom_settle_down_befor_poweron
- [ 0.255035] [E-PEN] wacom_gpio_init
- [ 0.255676] [E-PEN] : initialized.
- [ 0.256134] [TKEY] tkey_device_init: 8901_lvs2 On
- [ 0.256805] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
- [ 0.256927] brcm_wlan_init: start
- [ 0.257049] brcm_init_wlan_mem: WIFI MEM Allocated
- [ 0.272674] bio: create slab <bio-0> at 0
- [ 0.274108] ION heap vmalloc created
- [ 0.274230] ION heap mm created at 38800000 with size 3600000
- [ 0.274383] ION heap mm_fw created at 38600000 with size 200000
- [ 0.274505] ION heap mfc created at 3be00000 with size 2000
- [ 0.274627] ION heap sf created at 7a000000 with size 5000000
- [ 0.274749] ION heap wb created at 40400000 with size 1800000
- [ 0.274902] ION heap camera_preview created at 41c00000 with size 1200000
- [ 0.274993] ION heap qsecom created at 79400000 with size 600000
- [ 0.275146] ION heap audio created at 79a00000 with size 28b000
- [ 0.275390] pmic8058_pwm_probe: OK
- [ 0.276092] SCSI subsystem initialized
- [ 0.276336] usbcore: registered new interface driver usbfs
- [ 0.276519] usbcore: registered new interface driver hub
- [ 0.276763] usbcore: registered new device driver usb
- [ 0.277191] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
- [ 0.277496] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
- [ 0.277709] i2c i2c-13: Failed to register i2c client sec_touchkey at 0x20 (-16)
- [ 0.277832] i2c i2c-13: Can't create device at 0x20
- [ 0.277984] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
- [ 0.278198] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
- [ 0.278564] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
- [ 0.278778] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
- [ 0.279052] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
- [ 0.279418] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.279968] Bluetooth: Core ver 2.16
- [ 0.280090] NET: Registered protocol family 31
- [ 0.280212] Bluetooth: HCI device and connection manager initialized
- [ 0.280303] Bluetooth: HCI socket layer initialized
- [ 0.280456] Bluetooth: L2CAP socket layer initialized
- [ 0.280670] Bluetooth: SCO socket layer initialized
- [ 0.281249] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.281585] Switching to clocksource gp_timer
- [ 0.296020] NET: Registered protocol family 2
- [ 0.296295] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.296661] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.297393] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.298126] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.298217] TCP reno registered
- [ 0.298309] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.298461] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.298980] NET: Registered protocol family 1
- [ 0.299377] RPC: Registered named UNIX socket transport module.
- [ 0.299438] RPC: Registered udp transport module.
- [ 0.299591] RPC: Registered tcp transport module.
- [ 0.299682] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.299957] Trying to unpack rootfs image as initramfs...
- [ 0.393341] Freeing initrd memory: 2384K
- [ 0.393798] PMU: registered new PMU device of type 0
- [ 0.394104] PMU: registered new PMU device of type 1
- [ 0.394653] ETM/ETB intialized.
- [ 0.394866] pil_qdsp6v3 pil_qdsp6v3: using secure boot
- [ 0.395355] pil_modem pil_modem: using secure boot
- [ 0.395660] sdio_al:SDIO-AL SW version 1.30
- [ 0.398376] smd_channel_probe_worker: allocation table not initialized
- [ 0.404754] msm_dsps driver version 3.03.
- [ 0.410522] lpa_if_init: lpa_if_ptr 0xd9ace300 buf_vir 0xffdf0000 buf_phy 0x61010000 buf_zise 65536
- [ 0.412994] sec_switch_probe enter sec_switch_probe
- [ 0.413818] charm_modem_probe: Registering charm modem
- [ 0.416168] msm_rpm_log_probe: OK
- [ 0.416412] [BT] bcm4330_bluetooth_init
- [ 0.416870] [BT] bcm4330_bluetooth_probe
- [ 0.417388] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40270008
- [ 0.417480] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40270000
- [ 0.443786] sec_log_save_old: saved old log at 135479@d9080000
- [ 0.448333] sec_getlog_supply_kloginfo: 0xc1132504
- [ 0.526641] highmem bounce pool size: 64 pages
- [ 0.526977] ashmem: initialized
- [ 0.533172] fuse init (API version 7.16)
- [ 0.533508] msgmni has been set to 740
- [ 0.534942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 0.535125] io scheduler noop registered
- [ 0.535217] io scheduler deadline registered (default)
- [ 0.535369] io scheduler row registered
- [ 0.535522] io scheduler cfq registered
- [ 0.538055] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 0.538177] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 0.542053] mipi_dsi base phy_addr = 0x4700000 virt = 0xdb100000
- [ 0.542175] mmss_sfpb base phy_addr = 0x5700000,virt = 0xda83a000
- [ 0.542480] [Mipi_LCD] lcd_init
- [ 0.542846] [Mipi_LCD_ESD] sec_esd_probe : Registering esd driver
- [ 0.543365] Mipi_Lcd : mipi_video_s6e8aa0_wxga_q1_pt_init
- [ 0.543823] [Mipi_LCD] lcd_probe+
- [ 0.543914] [Mipi_LCD] msm_fb_add_device +
- [ 0.544067] setting pdata->panel_info.fb_num to 3. type: 8
- [ 0.552490] pm_runtime: fail to wake up
- [ 0.552520] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
- [ 0.552551] [Mipi_LCD] Use LDO19, volt=3100000
- [ 0.572448] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
- [ 0.633392] [Mipi_LCD] lcd_on
- [ 0.633422] [Mipi_LCD] lcd_on_seq +
- [ 0.692474] [Mipi_LCD] read_reg : D3[24] : 00 ce ef f6 .f8 ff 01 fe .00 d1 fd f4 .f8 fb 01 fa .00 ca f3 f2 .f9 01 01 fd .00 00 00 00 .
- [ 0.692565] [Mipi_LCD] mtp : 00 ce ef f6 f8 ff 01 fe 00 d1 fd f4 f8 fb 01 fa 00 ca f3 f2 f9 01 01 fd
- [ 0.692840] [Mipi_LCD] read_reg : D1[8] : a2 83 1f 01 .0b 00 00 40 .00 00 00 00 .
- [ 0.692901] [Mipi_LCD] Update LCD ID: A2-Line(0xA2) SM2C15PR(0x83) Ielvss(1f)
- [ 0.692932] It goes to ID unknown++++++++++++++++++++++++++++++ MTP VALUE ++++++++++++++++++++++++++++++
- [ 0.692993] V Level : 0 - R : 0x00000000(0000) G : 0x00000000(0000) B : 0x00000000(0000)
- [ 0.693054] V Level : 1 - R : 0xffffffce(-050) G : 0xffffffd1(-047) B : 0xffffffca(-054)
- [ 0.693084] V Level : 2 - R : 0xffffffef(-017) G : 0xfffffffd(-003) B : 0xfffffff3(-013)
- [ 0.693145] V Level : 3 - R : 0xfffffff6(-010) G : 0xfffffff4(-012) B : 0xfffffff2(-014)
- [ 0.693176] V Level : 4 - R : 0xfffffff8(-008) G : 0xfffffff8(-008) B : 0xfffffff9(-007)
- [ 0.693237] V Level : 5 - R : 0xffffffff(-001) G : 0xfffffffb(-005) B : 0x00000001(0001)
- [ 0.693298] V Level : 6 - R : 0xfffffffe(-002) G : 0xfffffffa(-006) B : 0xfffffffd(-003)
- [ 0.693328]
- [ 0.693359]
- [ 0.693359] ++++++++++++++++++++++++++++++ ADJUST VALUE ++++++++++++++++++++++++++++++
- [ 0.693389] V Level : 0 - R : 0x00000069(0105) G : 0x0000005a(0090) B : 0x0000006c(0108)
- [ 0.693450] V Level : 1 - R : 0x0000006f(0111) G : 0x00000088(0136) B : 0x00000067(0103)
- [ 0.693481] V Level : 2 - R : 0x0000009a(0154) G : 0x000000b3(0179) B : 0x000000a2(0162)
- [ 0.693542] V Level : 3 - R : 0x000000ae(0174) G : 0x000000b5(0181) B : 0x000000ab(0171)
- [ 0.693572] V Level : 4 - R : 0x00000086(0134) G : 0x0000008e(0142) B : 0x00000084(0132)
- [ 0.693634] V Level : 5 - R : 0x000000a5(0165) G : 0x000000a7(0167) B : 0x000000a5(0165)
- [ 0.693695] V Level : 6 - R : 0x000000d0(0208) G : 0x000000cd(0205) B : 0x000000ee(0238)
- [ 0.693725]
- [ 0.693725]
- [ 0.693756] ++++++++++++++++++++++++++++++ ADJUST VOLTAGE ++++++++++++++++++++++++++++++
- [ 0.693786] V Level : 0 - R : 4600V G : 4600V B : 4600V
- [ 0.693817] V Level : 1 - R : 3757V G : 3872V B : 3734V
- [ 0.693847] V Level : 2 - R : 3614V G : 3655V B : 3580V
- [ 0.693878] V Level : 3 - R : 3408V G : 3428V B : 3334V
- [ 0.693908] V Level : 4 - R : 3248V G : 3291V B : 3171V
- [ 0.693939] V Level : 5 - R : 3077V G : 3117V B : 2971V
- [ 0.694000] V Level : 6 - R : 2665V G : 2705V B : 2494V
- [ 0.694030] V Level : 7 - R : 2239V G : 2262V B : 2009V
- [ 0.694061] [Mipi_LCD] update_LCD_SEQ_by_id : G22SM2M15 c2 b0 i
- [ 0.694091]
- [ 0.694274] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
- [ 0.822326] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
- [ 0.823760] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 0.823791] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 0.827056] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
- [ 0.852722] Console: switching to colour frame buffer device 100x80
- [ 0.852905] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
- [ 0.883300] FrameBuffer[0] 800x1280 size=12288000 bytes is registered successfully!
- [ 0.887908] is_lpcharging_state: is_lpm_boot:0
- [ 0.892639] load_565rle_image: Can not open /initlogo.rle
- [ 0.897521] Registered led device: lcd-backlight
- [ 0.902313] mipi_dsi_probe: H.Period=1070, width=2, BPorch=134, xrex=800,FPorch=134
- [ 0.906951] mipi_dsi_probe: V.Period=1308, width=2, BPorch=1, xrex=1280,FPorch=25
- [ 0.911529] mipi_dsi_probe: mipi->frame_rate = 58
- [ 0.916046] mipi_dsi_probe: Lanes = 4
- [ 0.920562] mipi_dsi_probe: pll_divider_config.clk_rate = 487046880
- [ 0.925109] mipi_dsi_probe: dsi_pclk_rate = 81166666
- [ 0.929656] mipi_dsi_probe: mipi->dsi_pclk_rate = 81166666
- [ 0.934204] sec_getlog_supply_fbinfo: 0x49e99000 800 1280 32 2
- [ 0.938812] [Mipi_LCD] msm_fb_add_device -
- [ 0.943542] mdnie cmap->len 256
- [ 0.948181] [Mipi_LCD] lcd_probe-
- [ 0.953094] hdmi_msm hdmi_msm.0: probe
- [ 0.958099] hdmi_msm hdmi_msm.1: probe
- [ 0.962615] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
- [ 0.967346] setting pdata->panel_info.fb_num to 1. type: 7
- [ 0.972808] mdp4_dtv_vsync_init: ndx=0
- [ 0.982147] FrameBuffer[1] 1920x1080 size=8294400 bytes is registered successfully!
- [ 0.986938] mdp4_dtv_vsync_init: ndx=0
- [ 0.991638] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group d922a408
- [ 0.996337] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
- [ 1.001007] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- [ 1.005859] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
- [ 1.011688]
- [ 1.011718] msm_vidc_enc: Inside vid_enc_init()
- [ 1.016784]
- [ 1.016784] msm_vidc_enc: Inside vid_enc_vcd_init()
- [ 1.026000] is_lpcharging_state: is_lpm_boot:0
- [ 1.035278] mhl_v2, Board : get_mhl_int_irq, rev:12
- [ 1.040191] create mhl sysfile
- [ 1.045196] input: sii9234_rcp as /devices/virtual/input/input0
- [ 1.139770] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- [ 1.145446] msm_serial_hs module loaded
- [ 1.150146] msm_serial_hsl: detected port #1
- [ 1.154846] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
- [ 1.160095] msm_serial_hsl: detected port #0
- [ 1.164703] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
- [ 1.170135] msm_serial_hsl: driver initialized
- [ 1.176025] msm_rotator_probe: rotator_hw_revision=1
- [ 1.187164] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 1.193420] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 1.199157] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 1.209259] brd: module loaded
- [ 1.216033] loop: module loaded
- [ 1.220520] pmem: Initializing pmem_audio (user-space) as non-cached
- [ 1.225402] allocating 2666496 bytes at (null) (79c8b000 physical) for pmem_audio
- [ 1.230163] is_lpcharging_state: is_lpm_boot:0
- [ 1.234680] ak8975 probe start!
- [ 1.240112] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=1
- [ 1.245819] ak8975 probe success!
- [ 1.250305] is_lpcharging_state: is_lpm_boot:0
- [ 1.254913] k3dh probe start!!
- [ 1.259368] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=2
- [ 1.264587] k3dh probe success!!
- [ 1.269500] sec_jack:sec_jack_probe : Registering jack driver
- [ 1.274353] input: sec_jack as /devices/virtual/input/input1
- [ 1.280212] pm8xxx_upl_probe: OK
- [ 1.286346] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
- [ 1.291595] is_lpcharging_state: is_lpm_boot:0
- [ 1.296356] a2220_init
- [ 1.301452] i2c-core: driver [audience_a2220] using legacy suspend method
- [ 1.306335] i2c-core: driver [audience_a2220] using legacy resume method
- [ 1.311614] level device init
- [ 1.321380] audience_a2220B:a2220_ctrl : lsj:: a2220_firmware_buf = 68268
- [ 1.326293] audience_a2220B:a2220_ctrl: creating thread..
- [ 1.331390] init_a2220 -
- [ 1.331420] audience_a2220B:a2220_init_thread
- [ 1.341186] adie_codec_register_codec_operations: codec type 1
- [ 1.346923] Loading pn544 driver
- [ 1.351867] pn544_probe : IRQ num 628
- [ 1.357238] pn544_probe : requesting IRQ 628
- [ 1.363281] SCSI Media Changer driver v0.25
- [ 1.368591] PPP generic driver version 2.4.2
- [ 1.373962] PPP Deflate Compression module registered
- [ 1.378753] PPP BSD Compression module registered
- [ 1.390594] PPP MPPE Compression module registered
- [ 1.395416] NET: Registered protocol family 24
- [ 1.400085] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 1.409484] CSLIP: code copyright 1989 Regents of the University of California.
- [ 1.414855] tun: Universal TUN/TAP device driver, 1.6
- [ 1.419616] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.425781] smsc911x: Driver version 2008-10-21
- [ 1.430938] usbcore: registered new interface driver asix
- [ 1.431579] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init AAAAAAAAAAAAAAAAAAAAAA +
- [ 1.440917] usbcore: registered new interface driver cdc_ether
- [ 1.446044] usbcore: registered new interface driver net1080
- [ 1.451141] usbcore: registered new interface driver cdc_subset
- [ 1.456207] usbcore: registered new interface driver zaurus
- [ 1.461151] cdc_ncm: 04-Aug-2011
- [ 1.466094] usbcore: registered new interface driver cdc_ncm
- [ 1.470977] rmnet_init: SMD devices[8]
- [ 1.479827] rmnet_init: SDIO devices[8]
- [ 1.487274] msm_hsusb_smb328a_vbus_power attached 0
- [ 1.492248] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 1
- [ 1.494476] msm_otg msm_otg: success to host_notify_dev_register
- [ 1.494720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.495117] host driver registered w/ tranceiver
- [ 1.495361] usbcore: registered new interface driver cdc_acm
- [ 1.495391] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 1.495483] usbcore: registered new interface driver usblp
- [ 1.495513] Initializing USB Mass Storage driver...
- [ 1.495574] usbcore: registered new interface driver usb-storage
- [ 1.495635] USB Mass Storage support registered.
- [ 1.495697] usbcore: registered new interface driver ums-alauda
- [ 1.495758] usbcore: registered new interface driver ums-cypress
- [ 1.495819] usbcore: registered new interface driver ums-datafab
- [ 1.495910] usbcore: registered new interface driver ums-freecom
- [ 1.495971] usbcore: registered new interface driver ums-isd200
- [ 1.496032] usbcore: registered new interface driver ums-jumpshot
- [ 1.496093] usbcore: registered new interface driver ums-karma
- [ 1.496185] usbcore: registered new interface driver ums-onetouch
- [ 1.496246] usbcore: registered new interface driver ums-sddr09
- [ 1.496307] usbcore: registered new interface driver ums-sddr55
- [ 1.496368] usbcore: registered new interface driver ums-usbat
- [ 1.496459] usbcore: registered new interface driver usb_ehset_test
- [ 1.496887] peripheral driver registered w/ tranceiver
- [ 1.496978] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
- [ 1.606109] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 2
- [ 1.611511] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.616241] android_usb gadget: Number of LUNs=2
- [ 1.616302] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 3
- [ 1.616363] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 4
- [ 1.616394] a2220_bootup_init: starting to load image (2134 passes)...
- [ 1.634735] lun0: LUN: removable file: (no medium)
- [ 1.639373] lun1: LUN: removable file: (no medium)
- [ 1.644500] android_usb gadget: android_usb ready
- [ 1.650970] DIAG registered SDIO device
- [ 1.651580] diagchar initialized now
- [ 1.656707] mousedev: PS/2 mouse device common for all mice
- [ 1.667541] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
- [ 1.677490] is_lpcharging_state: is_lpm_boot:0
- [ 1.682098] [TSP] mxt540e_probe START
- [ 1.686889] input: sec_touchscreen as /devices/virtual/input/input3
- [ 1.691955] [TSP] mxt540e_power_on: enter
- [ 1.696960] [TSP POWER ON L4 2.8 enable
- [ 1.701873] [TSP POWER ON L1 3.3 enable
- [ 1.706420] mxt540e_power_on: exit
- [ 1.722259] msm_otg_sm_work 1801 id=0 OTG_STATE_UNDEFINED
- [ 1.726684] msm_hsusb_smb328a_vbus_power attached 1
- [ 1.730987] msm_hsusb_smb328a_vbus_power : psy is null!
- [ 1.835388] [OTG] msm_otg_start_host, on = 1
- [ 1.839843] host_notify: ndev name=usb_otg: from state=0 -> to state=1
- [ 1.844299] mxt540E_power_on is finished
- [ 1.848846] msm_hsusb_host msm_hsusb_host.0: Qualcomm On-Chip EHCI Host Controller
- [ 1.853424] msm_hsusb_host msm_hsusb_host.0: new USB bus registered, assigned bus number 1
- [ 1.858123] msm_hsusb_host msm_hsusb_host.0: irq 132, io base 0x12500000
- [ 1.862854] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.867340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.871978] usb usb1: Product: Qualcomm On-Chip EHCI Host Controller
- [ 1.876617] usb usb1: Manufacturer: Linux 3.0.72-cyanogenmod-ga23deb7-dirty ehci_hcd
- [ 1.881256] usb usb1: SerialNumber: msm_hsusb_host.0
- [ 1.886688] hub 1-0:1.0: USB hub found
- [ 1.891326] hub 1-0:1.0: 1 port detected
- [ 1.982452] qup_i2c qup_i2c.0: QUP: I2C status flags :0x111e3c8, irq:183
- [ 1.987121] qup_i2c qup_i2c.0: I2C slave addr:0x26 not connected
- [ 1.991607] Atmel MXT540E 0-004c: mxt540e_check_bootloader: i2c recv failed
- [ 1.996795] Atmel MXT540E 0-004c: family = 0xa1, variant = 0x3, version = 0x13, build = 170
- [ 2.001464] family = 0xa1, variant = 0x3, version = 0x13, build = 170
- [ 2.014678] [TSP] TSP chip is MXT540E
- [ 2.020996] [TSP] exist instance1 object (9)
- [ 2.027069] [TSP] exist instance1 object (15)
- [ 2.035369] [TSP] exist instance1 object (40)
- [ 2.040496] [TSP] exist instance1 object (42)
- [ 2.046203] [TSP] exist instance1 object (47)
- [ 2.053375] [TSP] exist instance1 object (52)
- [ 2.058319] [TSP] exist instance1 object (55)
- [ 2.063140] [TSP] exist instance1 object (57)
- [ 2.372314] [TSP] ta_status is 0
- [ 2.376403] [TSP] mxt540e_ta_probe ta_status = 0
- [ 2.383392] [TSP] calibration success!!!
- [ 2.388305] [TSP] calibration is on going
- [ 2.388580] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
- [ 2.390319] bmp180_probe : enter
- [ 2.394531] input: barometer_sensor as /devices/virtual/input/input5
- [ 2.395202] Registered sensors device: barometer_sensor
- [ 2.397674] using rtc device, pm8xxx_rtc, for alarms
- [ 2.397735] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- [ 2.398345] i2c /dev entries driver
- [ 2.406341] is_lpcharging_state: is_lpm_boot:0
- [ 2.406372] yda165:yda165_init
- [ 2.406463] yda165:yda165_probe
- [ 2.406494] yda165:yda165_probe
- [ 2.406524] yda165_probe: OK
- [ 2.406921] yda165:load_ampgain completed
- [ 2.407165] is_lpcharging_state: is_lpm_boot:0
- [ 2.407470] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=3
- [ 2.407684] input: proximity_sensor as /devices/virtual/input/input6
- [ 2.408355] opt_i2c_probe(839):
- [ 2.408386] opt_i2c_probe, 840 : start!!!
- [ 2.408416] GP2A opt i2c attach success!!!
- [ 2.408416] GP2A opt i2c attach success!!!
- [ 2.408447] opt_i2c_probe, 859 : end!!!
- [ 2.408538] opt_i2c_client : (0xd9a3f400)
- [ 2.409515] opt_i2c_write(497): : 0x4, 0x2
- [ 2.409545] gp2a_opt_probe is OK!!
- [ 2.410339] is_lpcharging_state: is_lpm_boot:0
- [ 2.411621] input: light_sensor as /devices/virtual/input/input7
- [ 2.412628] input: fsa9480 as /devices/i2c-5/5-0025/input/input8
- [ 2.415771] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
- [ 2.415985] i2c-core: driver [fsa9480] using legacy resume method
- [ 2.416137] is_lpcharging_state: is_lpm_boot:0
- [ 2.416229] [GYRO] k3g_probe start!
- [ 2.416320] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=4
- [ 2.416809] input: gyro_sensor as /devices/virtual/input/input9
- [ 2.419250] input: orientation_sensor as /devices/virtual/input/input10
- [ 2.419982] lirc_dev: IR Remote Control driver registered, major 239
- [ 2.420013] IR NEC protocol handler initialized
- [ 2.420043] IR RC5(x) protocol handler initialized
- [ 2.420074] IR RC6 protocol handler initialized
- [ 2.420104] IR JVC protocol handler initialized
- [ 2.420135] IR Sony protocol handler initialized
- [ 2.420166] IR RC5 (streamzap) protocol handler initialized
- [ 2.420196] IR LIRC bridge handler initialized
- [ 2.420227] Linux video capture interface: v2.00
- [ 2.420379] usbcore: registered new interface driver uvcvideo
- [ 2.420410] USB Video Class driver (v1.1.0)
- [ 2.422149] is_lpcharging_state: is_lpm_boot:0
- [ 2.422393] ############# M5MO probe ##############
- [ 2.422637] [M5MO] m5mo_sensor_probe : E
- [ 2.422668] [M5MO] m5mo_i2c_init : E
- [ 2.422760] [M5MO] m5mo_i2c_probe : E
- [ 2.422790] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
- [ 2.422821]
- [ 2.425354] is_lpcharging_state: is_lpm_boot:0
- [ 2.425628] ############# S5K5BAFX probe ##############
- [ 2.426177] [5BAFX] s5k5bafx_sensor_probe : E
- [ 2.426208] [5BAFX] s5k5bafx_i2c_init : E
- [ 2.426300] [5BAFX] s5k5bafx_i2c_probe : E
- [ 2.426361] [5BAFX] s5k5bafx_i2c_probe : X
- [ 2.426483] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
- [ 2.428924] [Torch] ledflash_init
- [ 2.429565] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
- [ 2.430236] max17040_probe: MAX17043 driver Loading!
- [ 2.430267] max17040_get_version :
- [ 2.430816] max17040 15-0036: MAX17040 Fuel-Gauge Ver 017
- [ 2.431304] max17040_get_rcomp : current rcomp = 0xd01f(208)
- [ 2.432250] max17040_get_rcomp : current rcomp = 0xd01f(208)
- [ 2.435119] i2c-core: driver [max17040] using legacy suspend method
- [ 2.435180] i2c-core: driver [max17040] using legacy resume method
- [ 2.435333] smb328a_probe: SMB328A driver Loading!
- [ 2.435394] is_lpcharging_state: is_lpm_boot:0
- [ 2.436737] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- [ 2.438385] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- [ 2.439300] i2c-core: driver [smb328a] using legacy suspend method
- [ 2.439361] i2c-core: driver [smb328a] using legacy resume method
- [ 2.440460] msm_adc successfully registered
- [ 2.441467] tsens_tm_probe: OK
- [ 2.441925] pm8xxx_init_adc: adc_channel_open() failed.
- [ 2.441955] pm8xxx_tm_probe: Unable to initialize adc
- [ 2.442016] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
- [ 2.442687] pm8xxx_tm_probe: OK
- [ 2.443420] device-mapper: uevent: version 1.0.3
- [ 2.444274] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 2.444519] Bluetooth: HCI UART driver ver 2.2
- [ 2.444549] Bluetooth: HCI H4 protocol initialized
- [ 2.444580] Bluetooth: HCI_IBS protocol initialized
- [ 2.444610] Bluetooth: BlueSleep Mode Driver Ver 1.1
- [ 2.445617] cpuidle: using governor ladder
- [ 2.445648] cpuidle: using governor menu
- [ 2.446319] mmc0: mci-version: 0
- [ 2.446441] mmc0: No card detect facilities available
- [ 2.446777] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
- [ 2.446838] mmc0: 8 bit data mode enabled
- [ 2.446868] mmc0: 4 bit data mode disabled
- [ 2.446868] mmc0: polling status mode disabled
- [ 2.446899] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 2.447052] mmc0: Slot eject status = 0
- [ 2.447082] mmc0: Power save feature enable = 1
- [ 2.447113] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x604a0000
- [ 2.447143] mmc0: DM cmd busaddr 0x604a0000, cmdptr busaddr 0x604b7f40
- [ 2.447998] mmc1: mci-version: 0
- [ 2.449310] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
- [ 2.449340] mmc1: 8 bit data mode enabled
- [ 2.449371] mmc1: 4 bit data mode disabled
- [ 2.449401] mmc1: polling status mode disabled
- [ 2.449432] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 2.449462] mmc1: Slot eject status = 0
- [ 2.449493] mmc1: Power save feature enable = 1
- [ 2.449523] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x604c0000
- [ 2.449554] mmc1: DM cmd busaddr 0x604c0000, cmdptr busaddr 0x604d7f40
- [ 2.450073] mmc2: mci-version: 0
- [ 2.450836] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
- [ 2.450897] mmc2: 8 bit data mode disabled
- [ 2.450927] mmc2: 4 bit data mode enabled
- [ 2.450958] mmc2: polling status mode disabled
- [ 2.450988] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 2.451019] mmc2: Slot eject status = 0
- [ 2.451049] mmc2: Power save feature enable = 1
- [ 2.451080] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x604e0000
- [ 2.451110] mmc2: DM cmd busaddr 0x604e0000, cmdptr busaddr 0x604f7f40
- [ 2.451507] mmc3: mci-version: 0
- [ 2.451721] mmc3: No card detect facilities available
- [ 2.452026] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
- [ 2.452056] mmc3: 8 bit data mode disabled
- [ 2.452087] mmc3: 4 bit data mode enabled
- [ 2.452117] mmc3: polling status mode disabled
- [ 2.452148] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 2.452178] mmc3: Slot eject status = 0
- [ 2.452209] mmc3: Power save feature enable = 1
- [ 2.452239] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x60500000
- [ 2.452331] mmc3: DM cmd busaddr 0x60500000, cmdptr busaddr 0x60517f40
- [ 2.452819] mmc4: mci-version: 0
- [ 2.453308] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
- [ 2.453369] mmc4: 8 bit data mode disabled
- [ 2.453399] mmc4: 4 bit data mode enabled
- [ 2.453399] mmc4: polling status mode disabled
- [ 2.453552] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 2.453582] mmc4: Slot eject status = 0
- [ 2.453613] mmc4: Power save feature enable = 1
- [ 2.453643] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x60520000
- [ 2.453674] mmc4: DM cmd busaddr 0x60520000, cmdptr busaddr 0x60537f40
- [ 2.454681] Registered led device: camera:flash0
- [ 2.454772] Registered led device: camera:flash1
- [ 2.456939] usbcore: registered new interface driver usbhid
- [ 2.456970] usbhid: USB HID core driver
- [ 2.458282] logger: created 512K log 'log_main'
- [ 2.458709] logger: created 256K log 'log_events'
- [ 2.459228] logger: created 512K log 'log_radio'
- [ 2.459655] logger: created 256K log 'log_system'
- [ 2.459686] sec_getlog_supply_loggerinfo: 0xc11c8cf0 0xc1248cf0 0xc12c8cf0 0xc1308cf0
- [ 2.460540] zcache: using lzo compressor
- [ 2.461029] zcache: cleancache enabled using kernel transcendent memory and compression buddies
- [ 2.461853] usbcore: registered new interface driver snd-usb-audio
- [ 2.463409] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
- [ 2.463989] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
- [ 2.464385] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
- [ 2.566040] mmc0: new high speed MMC card at address 0001
- [ 2.566589] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
- [ 2.566772] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
- [ 2.567108] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
- [ 2.572052] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
- [ 3.042175] param_sec_operation: filp_open failed. (-2)
- [ 3.046844] sec_open_param PARAM OPEN FAIL
- [ 3.047119] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
- [ 3.049194] ALSA device list:
- [ 3.049224] #0: msm-audio
- [ 3.049987] oprofile: using arm/armv7-scorpionmp
- [ 3.050140] GACT probability NOT on
- [ 3.050170] Mirror/redirect action on
- [ 3.050201] u32 classifier
- [ 3.050201] Actions configured
- [ 3.050231] Netfilter messages via NETLINK v0.30.
- [ 3.050323] nf_conntrack version 0.5.0 (11860 buckets, 47440 max)
- [ 3.050872] ctnetlink v0.93: registering with nfnetlink.
- [ 3.050964] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 3.050994] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 3.051818] xt_time: kernel timezone is -0000
- [ 3.052032] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.052246] arp_tables: (C) 2002 David S. Miller
- [ 3.052551] TCP cubic registered
- [ 3.052551] Initializing XFRM netlink socket
- [ 3.053009] mmcblk0boot1: unknown partition table
- [ 3.136779] sec_switch_init_work error value = 3
- [ 3.137084] NET: Registered protocol family 10
- [ 3.139160] Mobile IPv6
- [ 3.139221] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.139404] IPv6 over IPv4 tunneling driver
- [ 3.140472] NET: Registered protocol family 17
- [ 3.140563] NET: Registered protocol family 15
- [ 3.143127] mmcblk0boot0: unknown partition table
- [ 3.172607] [TSP] reset is ongoing
- [ 3.172668] Bluetooth: RFCOMM TTY layer initialized
- [ 3.172698] Bluetooth: RFCOMM socket layer initialized
- [ 3.172760] Bluetooth: RFCOMM ver 1.11
- [ 3.172790] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 3.172821] Bluetooth: BNEP filters: protocol multicast
- [ 3.172851] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.173065] NET: Registered protocol family 35
- [ 3.173217] Registering the dns_resolver key type
- [ 3.173309] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
- [ 3.216979] Registering SWP/SWPB emulation handler
- [ 3.221466] [TSP] normal mode
- [ 3.229980] clock_late_init() disabled 178 unused clocks
- [ 3.272369] sec_jack:sec_jack_det_irq_handler : ready = 1.
- [ 3.276916] sec_jack: ear micbias off
- [ 3.286468] set_dload_mode <0> ( C0016F04 )
- [ 3.286499] MSM Watchdog Initialized
- [ 3.296417] [TKEY] touchkey_init START
- [ 3.300872] is_lpcharging_state: is_lpm_boot:0
- [ 3.306427] [TKEY] touchkey_init F/W version: 0x4, Module version:0x2, HW_REV: 0xc
- [ 3.311004] [TKEY] sec i2c_touchkey_probe
- [ 3.315612] input: sec_touchkey as /devices/virtual/input/input11
- [ 3.321563] [TouchKey] touchkey_autocalibration :data[0]=8 data[1]=4 data[2]=2 data[3]=0
- [ 3.433349] [Touchkey] autocal Enabled
- [ 3.468902] [TKEY] after touchkey_auto_calibration result = 1
- [ 3.473571] [TKEY] touchkey_init END
- [ 3.478088] is_lpcharging_state: is_lpm_boot:0
- [ 3.482604] [E-PEN]: wacom_i2c_init: Sleep type-PEN_SLP pin
- [ 3.487213] [E-PEN]:wacom_i2c_probe:
- [ 3.491729] [E-PEN] wacom_init_hw : Power On
- [ 3.496215] [E-PEN] wacom_gpio_init
- [ 3.588806] gpio_request: gpio-251 (SD_WP_Switch) status -22
- [ 3.593475] msm_sdc3_get_wpswitch:Failed to request GPIO 251
- [ 3.597961] mmc2: host does not support reading read-only switch. assuming write-enable.
- [ 3.604736] mmc2: new high speed SDHC card at address b368
- [ 3.609924] mmcblk1: mmc2:b368 7.45 GiB
- [ 3.617675] mmcblk1: p1 p2
- [ 3.702331] [E-PEN] (wacom_init_hw) GPIO_PEN_RESET= [1]
- [ 3.707031] [E-PEN] (wacom_init_hw) GPIO_PEN_SLP = [0]
- [ 3.711517] [E-PEN] (wacom_init_hw) GPIO_PEN_PDCT = [1]
- [ 3.716094] [E-PEN] (wacom_init_hw) GPIO_PEN_IRQ = [0]
- [ 3.720489] [E-PEN] (wacom_init_hw) Power Logig init end
- [ 3.724945] [E-PEN] wacom_register_callbacks
- [ 3.729248] [E-PEN] Wacom driver is working for 4.4mm pitch pad.
- [ 3.733612] [E-PEN] Use 4.4mm pitch Offset tables
- [ 3.741577] mmc4: host doesn't support card's voltages
- [ 3.746032] mmc4: error -22 whilst initialising SDIO card
- [ 3.751983] mmc4: host doesn't support card's voltages
- [ 3.756469] mmc4: error -22 whilst initialising MMC card
- [ 3.892883] [E-PEN]: wacom_i2c_query: 0th ret of wacom query=2
- [ 3.897216] [E-PEN]: 0, 0, 0, 0, 0, 0, 0, FF, FF fw=0xffff
- [ 3.902038] [E-PEN]: wacom_i2c_query: 2th ret of wacom query=2
- [ 3.906402] [E-PEN]: x_max=0x2C80
- [ 3.910675] [E-PEN]: y_max=0x1BD0
- [ 3.915069] [E-PEN]: pressure_max=0xFF
- [ 3.919281] [E-PEN]: fw_version=0x404 (d7:0x4,d8:0x4)
- [ 3.923919] [E-PEN]: F, 31, D8, 20, A8, 0, FF, 4, 4
- [ 3.928436] input: sec_e-pen as /devices/i2c-18/18-0056/input/input12
- [ 3.934020] [E-PEN] wacom fw ver : 0x404, new fw ver : 0x404
- [ 3.938232] [E-PEN]: Verify CHECKSUM.
- [ 4.043334] msm_otg_suspend: usb in low power mode
- [ 4.152862] [E-PEN] received checksum 1f, b5, 41, b7, 7f
- [ 4.157104] [E-PEN] epen_checksum_read_atBoot, result 1
- [ 4.183074] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-02 00:38:39 UTC (88719)
- [ 4.187652] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- [ 4.192504] sec_bat_get_lpcharging_state: LP charging:0
- [ 4.198089] ------------[ cut here ]------------
- [ 4.202484] WARNING: at /home/gpf/UbuntuTouch/quincyatt/kernel/samsung/msm8660-common/fs/proc/generic.c:586 proc_register+0x2a8/0x358()
- [ 4.211151] proc_dir_entry '/proc/last_kmsg' already registered
- [ 4.215667] Modules linked in:
- [ 4.216369] ------------[ cut here ]------------
- [ 4.216430] WARNING: at /home/gpf/UbuntuTouch/quincyatt/kernel/samsung/msm8660-common/kernel/irq/manage.c:421 enable_irq+0x50/0x6c()
- [ 4.216491] Unbalanced enable for IRQ 505
- [ 4.216522] Modules linked in:
- [ 4.216552] [<c010ac7c>] (unwind_backtrace+0x0/0xe0) from [<c019b4b0>] (warn_slowpath_common+0x4c/0x64)
- [ 4.216613] [<c019b4b0>] (warn_slowpath_common+0x4c/0x64) from [<c019b548>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 4.216674] [<c019b548>] (warn_slowpath_fmt+0x2c/0x3c) from [<c01eb4a8>] (enable_irq+0x50/0x6c)
- [ 4.216735] [<c01eb4a8>] (enable_irq+0x50/0x6c) from [<c04a9f1c>] (pm8058_xoadc_configure+0x3f8/0x444)
- [ 4.216796] [<c04a9f1c>] (pm8058_xoadc_configure+0x3f8/0x444) from [<c04aa3bc>] (pm8058_xoadc_calib_device+0xe0/0x1f4)
- [ 4.216888] [<c04aa3bc>] (pm8058_xoadc_calib_device+0xe0/0x1f4) from [<c05ec980>] (adc_channel_request_conv+0x3c/0x110)
- [ 4.216949] [<c05ec980>] (adc_channel_request_conv+0x3c/0x110) from [<c05e8c84>] (sec_bat_read_adc+0x78/0x194)
- [ 4.217010] [<c05e8c84>] (sec_bat_read_adc+0x78/0x194) from [<c05e8ddc>] (sec_bat_adc_work+0x3c/0x170)
- [ 4.217071] [<c05e8ddc>] (sec_bat_adc_work+0x3c/0x170) from [<c01b9ad4>] (process_one_work+0x2d0/0x51c)
- [ 4.217132] [<c01b9ad4>] (process_one_work+0x2d0/0x51c) from [<c01b9fac>] (worker_thread+0x28c/0x454)
- [ 4.217193] [<c01b9fac>] (worker_thread+0x28c/0x454) from [<c01be804>] (kthread+0x80/0x88)
- [ 4.217254] [<c01be804>] (kthread+0x80/0x88) from [<c0105b98>] (kernel_thread_exit+0x0/0x8)
- [ 4.217315] ---[ end trace c4e2b4d17a04903c ]---
- [ 4.355651] [<c010ac7c>] (unwind_backtrace+0x0/0xe0) from [<c019b4b0>] (warn_slowpath_common+0x4c/0x64)
- [ 4.355743] [<c019b4b0>] (warn_slowpath_common+0x4c/0x64) from [<c019b548>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 4.355804] [<c019b548>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02aa04c>] (proc_register+0x2a8/0x358)
- [ 4.355865] [<c02aa04c>] (proc_register+0x2a8/0x358) from [<c02aa428>] (create_proc_entry+0x68/0x84)
- [ 4.355926] [<c02aa428>] (create_proc_entry+0x68/0x84) from [<c0030074>] (ram_console_late_init+0x24/0x74)
- [ 4.355987] [<c0030074>] (ram_console_late_init+0x24/0x74) from [<c010049c>] (do_one_initcall+0x90/0x160)
- [ 4.356048] [<c010049c>] (do_one_initcall+0x90/0x160) from [<c0008980>] (kernel_init+0x98/0x140)
- [ 4.356109] [<c0008980>] (kernel_init+0x98/0x140) from [<c0105b98>] (kernel_thread_exit+0x0/0x8)
- [ 4.356170] ---[ end trace c4e2b4d17a04903d ]---
- [ 4.356231] sec_bat_polling_work: adc work already on a queue
- [ 4.356323] param_sec_operation: filp_open failed. (-2)
- [ 4.356353] sec_open_param PARAM OPEN FAIL
- [ 4.356384] sec_switch_init_work error value = 3
- [ 4.356597] pmic8058_xoadc:The offset for AMUX calibrationwas -547
- [ 4.368316] [fg] p:8335, s1:88, s2:100, v:3890000, t:0
- [ 4.487091] Freeing init memory: 312K
- [ 4.555877] systemd-udevd[144]: starting version 204
- [ 4.784851] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- [ 4.800903] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 5
- [ 4.819061] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 6
- [ 4.832580] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 7
- [ 4.862640] a2220_bootup_init: firmware loaded successfully
- [ 4.888458] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- [ 4.896911] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- [ 4.910552] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- [ 5.073028] audience_a2220B:execute_cmdmsg : execute_cmdmsg CHK :: 80 0 0 0
- [ 5.083465] audience_a2220B:execute_cmdmsg : execute_cmdmsg :: 80 0 0 0
- [ 5.091369] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 8
- [ 5.099243] audience_a2220B:a2220_bootup_init : get_hw_rev of Target = 12
- [ 5.106994] [AUD] new mode =20
- [ 5.115783] audience_a2220B:execute_cmdmsg : execute_cmdmsg CHK :: 80 52 0 48
- [ 5.123596] audience_a2220B:execute_cmdmsg : execute_cmdmsg :: 80 52 0 48
- [ 5.131835] audience_a2220B:execute_cmdmsg : execute_cmdmsg CHK :: 80 52 0 5c
- [ 5.139465] audience_a2220B:execute_cmdmsg : execute_cmdmsg :: 80 52 0 5c
- [ 5.147308] audience_a2220B:execute_cmdmsg : ...go to suspend first
- [ 5.154846] audience_a2220B:a2220_bootup_init : a2220_bootup_init - finish
- [ 5.352844] param_sec_operation: filp_open failed. (-2)
- [ 5.362670] sec_open_param PARAM OPEN FAIL
- [ 5.369293] sec_switch_init_work error value = 3
- [ 6.372985] param_sec_operation: filp_open failed. (-2)
- [ 6.379486] sec_open_param PARAM OPEN FAIL
- [ 6.386016] sec_switch_init_work error value = 3
- [ 6.503021] initrd: mounting /dev/mmcblk0p25
- [ 6.515075] EXT2-fs (mmcblk0p25): error: couldn't mount because of unsupported optional features (244)
- [ 6.573852] EXT4-fs (mmcblk0p25): couldn't mount as ext3 due to feature incompatibilities
- [ 6.946777] EXT4-fs (mmcblk0p25): warning: maximal mount count reached, running e2fsck is recommended
- [ 6.963348] zcache: created ephemeral tmem pool, id=0, client=65535
- [ 6.970275] EXT4-fs (mmcblk0p25): recovery complete
- [ 6.980895] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.382995] param_sec_operation: filp_open failed. (-2)
- [ 7.389465] sec_open_param PARAM OPEN FAIL
- [ 7.397583] sec_switch_init_work error value = 3
- [ 7.433624] init: upstart-dbus-bridge main process (203) terminated with status 1
- [ 7.440490] init: upstart-dbus-bridge main process ended, respawning
- [ 7.473541] init: ureadahead main process (207) terminated with status 5
- [ 7.909423] init: ubuntu-session main process (262) terminated with status 2
- [ 7.909576] init: ubuntu-session main process ended, respawning
- [ 8.069824] init: plymouth-upstart-bridge main process (307) terminated with status 1
- [ 8.072937] init: ubuntu-session main process (298) terminated with status 2
- [ 8.073059] init: ubuntu-session main process ended, respawning
- [ 8.234497] init: mounted-proc main process (323) terminated with status 1
- [ 8.237030] init: ubuntu-session main process (330) terminated with status 2
- [ 8.237182] init: ubuntu-session main process ended, respawning
- [ 8.344909] init: powerd main process (305) killed by SEGV signal
- [ 8.354370] [fg] p:8319, s1:87, s2:88, v:3892500, t:948
- [ 8.359008] init: ubuntu-session main process (345) terminated with status 2
- [ 8.359161] init: ubuntu-session main process ended, respawning
- [ 8.403594] param_sec_operation: filp_open failed. (-2)
- [ 8.409423] sec_open_param PARAM OPEN FAIL
- [ 8.422088] sec_switch_init_work error value = 3
- [ 8.433380] fsa9480 5-0025: fsa9480_init_detect
- [ 8.434356] fsa9480 5-0025: dev1: 0x80, dev2: 0x0
- [ 8.434387] fsa9480 5-0025: otg connect
- [ 8.504241] init: ubuntu-session main process (355) terminated with status 2
- [ 8.504364] init: ubuntu-session main process ended, respawning
- [ 8.691558] init: ubuntu-session main process (363) terminated with status 2
- [ 8.691711] init: ubuntu-session main process ended, respawning
- [ 8.733551] msmsdcc_runtime_suspend: Enter WIFI suspend
- [ 8.733612] msm_otg msm_otg: msm_otg_late_power_work, ID=0, booster=0
- [ 8.733642] msm_hsusb_smb328a_vbus_power attached 1
- [ 8.740447] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x31
- [ 8.741119] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x0) = 0x17
- [ 8.741516] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x5
- [ 8.742156] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0x10
- [ 8.742553] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
- [ 8.742950] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
- [ 8.743713] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
- [ 8.744140] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x44
- [ 8.744842] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
- [ 8.745269] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x8b
- [ 8.745941] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
- [ 8.746337] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x5c
- [ 8.747009] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0xd5
- [ 8.747436] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0x36
- [ 8.748107] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x7) = 0xf6
- [ 8.748535] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
- [ 8.751831] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
- [ 8.753112] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
- [ 8.753173] smb328a 15-0034: smb328a_enable_otg :
- [ 8.753631] smb328a 15-0034: smb328a_enable_otg : reg (0x31) = 0xb9
- [ 8.754333] smb328a 15-0034: smb328a_enable_otg : => reg (0x31) = 0xbb
- [ 8.755187] msm_otg_resume: usb exited from low power mode
- [ 8.755218] [OTG] msm_otg_start_host, on = 2
- [ 8.755279] msm_otg_irq: IRQ state: a_wait_bcon otgsc = 9200020
- [ 8.806304] msm_otg_irq: IRQ state: a_wait_bcon otgsc = 92c0c20
- [ 8.806365] msm_otg msm_otg: Acc power on detect
- [ 8.811706] init: ubuntu-session main process (380) terminated with status 2
- [ 8.811889] init: ubuntu-session main process ended, respawning
- [ 8.850097] msm_otg_irq: IRQ state: a_wait_bcon otgsc = 9202c20
- [ 8.913543] usb 1-1: new full speed USB device number 2 using msm_hsusb_host
- [ 8.920684] init: ubuntu-session main process (396) terminated with status 2
- [ 8.920867] init: ubuntu-session main process ended, respawning
- [ 8.970458] msm_otg_irq: IRQ state: a_wait_bcon otgsc = 9220e20
- [ 8.989929] init: ubuntu-session main process (415) terminated with status 2
- [ 8.990051] init: ubuntu-session main process ended, respawning
- [ 9.069366] usb 1-1: New USB device found, idVendor=413c, idProduct=1002
- [ 9.069396] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 9.069458] usb 1-1: Product: Dell USB Keyboard Hub
- [ 9.069488] usb 1-1: Manufacturer: Dell
- [ 9.072448] hub 1-1:1.0: USB hub found
- [ 9.073333] hub 1-1:1.0: 3 ports detected
- [ 9.277465] msm_snddev_set_dec: Invalid session id 0
- [ 9.279785] init: ubuntu-session main process (421) terminated with status 2
- [ 9.279937] init: ubuntu-session main process ended, respawning
- [ 9.284667] Division by zero in kernel.
- [ 9.284729] [<c010ac7c>] (unwind_backtrace+0x0/0xe0) from [<c03c27a4>] (Ldiv0+0x8/0x10)
- [ 9.284790] [<c03c27a4>] (Ldiv0+0x8/0x10) from [<c0679ca4>] (msm_volume_put+0x30/0xa0)
- [ 9.284851] [<c0679ca4>] (msm_volume_put+0x30/0xa0) from [<c06490f0>] (snd_ctl_ioctl+0x488/0x7a8)
- [ 9.284912] [<c06490f0>] (snd_ctl_ioctl+0x488/0x7a8) from [<c0265460>] (do_vfs_ioctl+0x568/0x5e0)
- [ 9.284973] [<c0265460>] (do_vfs_ioctl+0x568/0x5e0) from [<c026550c>] (sys_ioctl+0x34/0x54)
- [ 9.285034] [<c026550c>] (sys_ioctl+0x34/0x54) from [<c0105060>] (ret_fast_syscall+0x0/0x30)
- [ 9.285064] Division by zero in kernel.
- [ 9.285095] [<c010ac7c>] (unwind_backtrace+0x0/0xe0) from [<c03c27a4>] (Ldiv0+0x8/0x10)
- [ 9.285156] [<c03c27a4>] (Ldiv0+0x8/0x10) from [<c0679cbc>] (msm_volume_put+0x48/0xa0)
- [ 9.285217] [<c0679cbc>] (msm_volume_put+0x48/0xa0) from [<c06490f0>] (snd_ctl_ioctl+0x488/0x7a8)
- [ 9.285247] [<c06490f0>] (snd_ctl_ioctl+0x488/0x7a8) from [<c0265460>] (do_vfs_ioctl+0x568/0x5e0)
- [ 9.285400] [<c0265460>] (do_vfs_ioctl+0x568/0x5e0) from [<c026550c>] (sys_ioctl+0x34/0x54)
- [ 9.288299] [<c026550c>] (sys_ioctl+0x34/0x54) from [<c0105060>] (ret_fast_syscall+0x0/0x30)
- [ 9.288696] auddev_cb_function, evt_id=64,
- [ 9.288757] msm_device_volume_put : device bt_sco_mono_nrec_rx does not support device volume control.
- [ 9.288909] msm_reset_put:Resetting all devices
- [ 9.296691] msm_clear_all_session:
- [ 9.296783] msm_anc_put : device handset_rx does not support anc control.
- [ 9.297271] Source device 0 is not TX device
- [ 9.304595] auddev_cb_function, evt_id=64,
- [ 9.304901] voice_set_loopback_mode: 0
- [ 9.304962] msm_device_put:device handset_rx set 0
- [ 9.304992] msm_device_put:device handset_tx set 1
- [ 9.305023] Device handset_tx Opened = 0
- [ 9.305053] msm_device_put:device freq =48000
- [ 9.312103] Device trying to open : handset_tx
- [ 9.343902] afe_open: 1 48000
- [ 9.364379] usb 1-1.1: new full speed USB device number 3 using msm_hsusb_host
- [ 9.423614] param_sec_operation: filp_open failed. (-2)
- [ 9.429077] sec_open_param PARAM OPEN FAIL
- [ 9.439422] sec_switch_init_work error value = 3
- [ 9.489349] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2002
- [ 9.489410] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 9.489440] usb 1-1.1: Product: Dell USB Keyboard Hub
- [ 9.489471] usb 1-1.1: Manufacturer: Dell
- [ 9.495056] input: Dell Dell USB Keyboard Hub as /devices/platform/msm_hsusb_host.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
- [ 9.503631] input: Dell Dell USB Keyboard Hub as /devices/platform/msm_hsusb_host.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
- [ 9.534240] init: plymouth-stop pre-start process (484) terminated with status 1
- [ 9.559234] init: ubuntu-session main process (477) terminated with status 2
- [ 9.559448] init: ubuntu-session respawning too fast, stopped
- [ 9.584381] usb 1-1.2: new full speed USB device number 4 using msm_hsusb_host
- [ 9.695343] usb 1-1.2: not running at top speed; connect to a high speed hub
- [ 9.701354] usb 1-1.2: New USB device found, idVendor=08ec, idProduct=0020
- [ 9.701416] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 9.701446] usb 1-1.2: Product: U3 smart 1GB
- [ 9.701477] usb 1-1.2: Manufacturer: Ativa
- [ 9.701507] usb 1-1.2: SerialNumber: 0951D17122D388F6
- [ 9.702758] scsi0 : usb-storage 1-1.2:1.0
- [ 10.453613] param_sec_operation: filp_open failed. (-2)
- [ 10.453796] sec_open_param PARAM OPEN FAIL
- [ 10.453979] sec_switch_init_work error value = 3
- [ 10.698425] scsi 0:0:0:0: Direct-Access Ativa U3 smart 1GB 6.51 PQ: 0 ANSI: 0 CCS
- [ 10.701385] scsi 0:0:0:1: CD-ROM Ativa U3 smart 1GB 6.51 PQ: 0 ANSI: 0
- [ 10.703338] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 10.704132] scsi 0:0:0:1: Attached scsi generic sg1 type 5
- [ 10.706359] sd 0:0:0:0: [sda] sd_revalidate_disk
- [ 10.709381] sd 0:0:0:0: [sda] 1944991 512-byte logical blocks: (995 MB/949 MiB)
- [ 10.712341] sd 0:0:0:0: [sda] Write Protect is off
- [ 10.712371] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
- [ 10.715362] sd 0:0:0:0: [sda] No Caching mode page present
- [ 10.715637] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 11.228332] sd 0:0:0:0: [sda] sd_revalidate_disk
- [ 11.237365] sd 0:0:0:0: [sda] No Caching mode page present
- [ 11.237609] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 11.256378] sda: sda1
- [ 11.258392] disk_uevent 1138, disk->media_present=1, cnt=1
- [ 11.260345] sd 0:0:0:0: [sda] sd_revalidate_disk
- [ 11.269348] sd 0:0:0:0: [sda] No Caching mode page present
- [ 11.269592] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 11.269775] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 11.453613] param_sec_operation: filp_open failed. (-2)
- [ 11.453857] sec_open_param PARAM OPEN FAIL
- [ 11.454010] sec_switch_init_work error value = 3
- [ 12.453613] param_sec_operation: filp_open failed. (-2)
- [ 12.453796] sec_open_param PARAM OPEN FAIL
- [ 12.453918] sec_switch_init_work failed 10 times... So switch_sel is set by [1]
- [ 12.454193] sec_switch_init_work value = 1
- [ 12.454345] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
- [ 12.464782] fsa9480_manual_switching(0)
- [ 12.465576] msm_otg_irq: IRQ state: a_host otgsc = 9222e20
- [ 12.465698] usb 1-1: USB disconnect, device number 2
- [ 12.465728] usb 1-1.1: USB disconnect, device number 3
- [ 12.465881] msm_otg_irq: IRQ state: a_host otgsc = 9222e20
- [ 13.013946] usb 1-1.2: USB disconnect, device number 4
- [ 13.014617] sd 0:0:0:0: [sda] sd_remove
- [ 13.014678] sd 0:0:0:0: [sda] sd_media_scan_thread exit
- [ 13.014739] sd 0:0:0:0: [sda] scan thread kill success
- [ 13.063873] disk_uevent 1138, disk->media_present=0, cnt=0
- [ 13.343597] usb 1-1: new full speed USB device number 5 using msm_hsusb_host
- [ 13.499267] usb 1-1: New USB device found, idVendor=413c, idProduct=1002
- [ 13.499328] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 13.499359] usb 1-1: Product: Dell USB Keyboard Hub
- [ 13.499389] usb 1-1: Manufacturer: Dell
- [ 13.502319] hub 1-1:1.0: USB hub found
- [ 13.503265] hub 1-1:1.0: 3 ports detected
- [ 13.784301] usb 1-1.1: new full speed USB device number 6 using msm_hsusb_host
- [ 13.899291] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2002
- [ 13.899322] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 13.899353] usb 1-1.1: Product: Dell USB Keyboard Hub
- [ 13.899383] usb 1-1.1: Manufacturer: Dell
- [ 13.904937] input: Dell Dell USB Keyboard Hub as /devices/platform/msm_hsusb_host.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input15
- [ 13.912475] input: Dell Dell USB Keyboard Hub as /devices/platform/msm_hsusb_host.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input16
- [ 13.994323] usb 1-1.2: new full speed USB device number 7 using msm_hsusb_host
- [ 14.105285] usb 1-1.2: not running at top speed; connect to a high speed hub
- [ 14.111267] usb 1-1.2: New USB device found, idVendor=08ec, idProduct=0020
- [ 14.111297] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 14.111358] usb 1-1.2: Product: U3 smart 1GB
- [ 14.111389] usb 1-1.2: Manufacturer: Ativa
- [ 14.111389] usb 1-1.2: SerialNumber: 0951D17122D388F6
- [ 14.112670] scsi1 : usb-storage 1-1.2:1.0
- [ 15.108367] scsi 1:0:0:0: Direct-Access Ativa U3 smart 1GB 6.51 PQ: 0 ANSI: 0 CCS
- [ 15.111328] scsi 1:0:0:1: CD-ROM Ativa U3 smart 1GB 6.51 PQ: 0 ANSI: 0
- [ 15.113281] sd 1:0:0:0: Attached scsi generic sg0 type 0
- [ 15.114074] scsi 1:0:0:1: Attached scsi generic sg1 type 5
- [ 15.114349] sd 1:0:0:0: [sda] sd_revalidate_disk
- [ 15.117279] sd 1:0:0:0: [sda] 1944991 512-byte logical blocks: (995 MB/949 MiB)
- [ 15.120269] sd 1:0:0:0: [sda] Write Protect is off
- [ 15.120300] sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08
- [ 15.123291] sd 1:0:0:0: [sda] No Caching mode page present
- [ 15.123474] sd 1:0:0:0: [sda] Assuming drive cache: write through
- [ 15.638275] sd 1:0:0:0: [sda] sd_revalidate_disk
- [ 15.647277] sd 1:0:0:0: [sda] No Caching mode page present
- [ 15.647460] sd 1:0:0:0: [sda] Assuming drive cache: write through
- [ 15.666290] sda: sda1
- [ 15.668304] disk_uevent 1138, disk->media_present=1, cnt=1
- [ 15.670257] sd 1:0:0:0: [sda] sd_revalidate_disk
- [ 15.679260] sd 1:0:0:0: [sda] No Caching mode page present
- [ 15.679473] sd 1:0:0:0: [sda] Assuming drive cache: write through
- [ 15.679718] sd 1:0:0:0: [sda] Attached SCSI removable disk
- [ 16.078979] init: ofono main process (568) terminated with status 1
- [ 16.079132] init: ofono main process ended, respawning
- [ 24.126800] init: ofono main process (614) terminated with status 1
- [ 24.126922] init: ofono main process ended, respawning
- [ 32.171051] init: ofono main process (637) terminated with status 1
- [ 32.171203] init: ofono main process ended, respawning
- [ 32.434020] [TSP] mxt_reconfigration_normal execute!!
- [ 40.225006] init: ofono main process (644) terminated with status 1
- [ 40.225128] init: ofono main process ended, respawning
- [ 48.280517] init: ofono main process (649) terminated with status 1
- [ 48.280639] init: ofono main process ended, respawning
- [ 56.337036] init: ofono main process (655) terminated with status 1
- [ 56.337158] init: ofono main process ended, respawning
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement