API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 20th, 2013
57
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.45 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2011.12-rc1 (Jun 07 2012 - 15:22:33)
  2. Texas Instruments OMAP4460 ES1.1
  3. OMAP SD/MMC: 0
  4. reading u-boot.img
  5. reading u-boot.img
  6.  
  7.  
  8. U-Boot 2011.12-rc1 (Jun 07 2012 - 15:22:33)
  9.  
  10. CPU : OMAP4460 ES1.1
  11. Board: OMAP4 Panda
  12. I2C: ready
  13. DRAM: 1 GiB
  14. WARNING: Caches not enabled
  15. MMC: OMAP SD/MMC: 0
  16. Using default environment
  17.  
  18. In: serial
  19. Out: serial
  20. Err: serial
  21. Net: No ethernet found.
  22. Hit any key to stop autoboot: 0
  23. reading uEnv.txt
  24.  
  25. ** Unable to read "uEnv.txt" from mmc 0:1 **
  26. reading boot.scr
  27.  
  28. 274 bytes read
  29. Loaded script from boot.scr
  30. Running bootscript from mmc0 ...
  31. ## Executing script at 82000000
  32. reading uImage
  33.  
  34. 4440680 bytes read
  35. reading uInitrd
  36.  
  37. 4287891 bytes read
  38. ## Booting kernel from Legacy Image at 80000000 ...
  39. Image Name: Linux
  40. Image Type: ARM Linux Kernel Image (uncompressed)
  41. Data Size: 4440616 Bytes = 4.2 MiB
  42. Load Address: 80008000
  43. Entry Point: 80008000
  44. Verifying Checksum ... OK
  45. ## Loading init Ramdisk from Legacy Image at 81600000 ...
  46. Image Name: initramfs
  47. Image Type: ARM Linux RAMDisk Image (uncompressed)
  48. Data Size: 4287827 Bytes = 4.1 MiB
  49. Load Address: 00000000
  50. Entry Point: 00000000
  51. Verifying Checksum ... OK
  52. Loading Kernel Image ... OK
  53. OK
  54.  
  55. Starting kernel ...
  56.  
  57. Uncompressing Linux... done, booting the kernel.
  58. [ 0.000000] Booting Linux on physical CPU 0
  59. [ 0.000000] Initializing cgroup subsys cpuset
  60. [ 0.000000] Initializing cgroup subsys cpu
  61. [ 0.000000] Linux version 3.2.0-1429-omap4 (buildd@rompo) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38-Ubuntu SMP)
  62. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  63. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  64. [ 0.000000] Machine: OMAP4 Panda board
  65. [ 0.000000] Reserving 33554432 bytes SDRAM for VRAM
  66. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  67. [ 0.000000] OMAP4460 ES1.1
  68. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1242000 s10112 r8192 d14464 u32768
  69. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251648
  70. [ 0.000000] Kernel command line: rw vram=32M fixrtc mem=1G@0x80000000 root=/dev/mmcblk0p2 console=ttyO2,115200n8 rootwait
  71. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  72. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  73. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  74. [ 0.000000] allocated 4194304 bytes of page_cgroup
  75. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  76. [ 0.000000] Memory: 991MB = 991MB total
  77. [ 0.000000] Memory: 986952k/986952k available, 61624k reserved, 228352K highmem
  78. [ 0.000000] Virtual kernel memory layout:
  79. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  80. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  81. [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
  82. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  83. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  84. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  85. [ 0.000000] .text : 0xc0008000 - 0xc08b6734 (8890 kB)
  86. [ 0.000000] .init : 0xc08b7000 - 0xc091b780 ( 402 kB)
  87. [ 0.000000] .data : 0xc091c000 - 0xc0972e88 ( 348 kB)
  88. [ 0.000000] .bss : 0xc0972eac - 0xc0a391cc ( 793 kB)
  89. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  90. [ 0.000000] Preemptible hierarchical RCU implementation.
  91. [ 0.000000] NR_IRQS:410 nr_irqs:410 410
  92. [ 0.000000] ------------[ cut here ]------------
  93. [ 0.000000] WARNING: at /build/buildd/linux-ti-omap4-3.2.0/arch/arm/common/gic.c:611 gic_init+0xb0/0x11c()
  94. [ 0.000000] Cannot allocate irq_descs @ IRQ16, assuming pre-allocated
  95. [ 0.000000] Modules linked in:
  96. [ 0.000000] [<c0015e80>] (unwind_backtrace+0x0/0xec) from [<c05bcef0>] (dump_stack+0x20/0x24)
  97. [ 0.000000] [<c05bcef0>] (dump_stack+0x20/0x24) from [<c0052994>] (warn_slowpath_common+0x5c/0x74)
  98. [ 0.000000] [<c0052994>] (warn_slowpath_common+0x5c/0x74) from [<c0052a68>] (warn_slowpath_fmt+0x40/0x48)
  99. [ 0.000000] [<c0052a68>] (warn_slowpath_fmt+0x40/0x48) from [<c08bed00>] (gic_init+0xb0/0x11c)
  100. [ 0.000000] [<c08bed00>] (gic_init+0xb0/0x11c) from [<c08c2410>] (gic_init_irq+0x6c/0x80)
  101. [ 0.000000] [<c08c2410>] (gic_init_irq+0x6c/0x80) from [<c08ba4dc>] (init_IRQ+0x1c/0x24)
  102. [ 0.000000] [<c08ba4dc>] (init_IRQ+0x1c/0x24) from [<c08b7774>] (start_kernel+0x184/0x304)
  103. [ 0.000000] [<c08b7774>] (start_kernel+0x184/0x304) from [<80008044>] (0x80008044)
  104. [ 0.000000] ---[ end trace da227214a82491b7 ]---
  105. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  106. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  107. [ 0.000000] Console: colour dummy device 80x30
  108. [ 0.000152] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
  109. [ 0.070404] pid_max: default: 32768 minimum: 301
  110. [ 0.070678] Security Framework initialized
  111. [ 0.070739] AppArmor: AppArmor initialized
  112. [ 0.070739] Yama: becoming mindful.
  113. [ 0.071075] Mount-cache hash table entries: 512
  114. [ 0.072174] Initializing cgroup subsys cpuacct
  115. [ 0.072235] Initializing cgroup subsys memory
  116. [ 0.072296] Initializing cgroup subsys devices
  117. [ 0.072326] Initializing cgroup subsys freezer
  118. [ 0.072326] Initializing cgroup subsys net_cls
  119. [ 0.072357] Initializing cgroup subsys blkio
  120. [ 0.072387] Initializing cgroup subsys perf_event
  121. [ 0.072540] CPU: Testing write buffer coherency: ok
  122. [ 0.072601] ftrace: allocating 25720 entries in 76 pages
  123. [ 0.117401] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  124. [ 0.117462] Calibrating local timer... 341.57MHz.
  125. [ 0.164306] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  126. [ 0.164428] Setting up static identity map for 0x805d7fc8 - 0x805d8010
  127. [ 0.164459] L310 cache controller enabled
  128. [ 0.164459] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
  129. [ 0.240905] CPU1: Booted secondary processor
  130. [ 0.271057] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  131. [ 0.271087] CPU1: Unknown IPI message 0x1
  132. [ 0.271118] Brought up 2 CPUs
  133. [ 0.271148] SMP: Total of 2 processors activated (2755.07 BogoMIPS).
  134. [ 0.272125] devtmpfs: initialized
  135. [ 0.276733] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
  136. [ 0.335968] Enabling ERRATA 751472
  137. [ 0.335998] OMAP4: Map 0xafe00000 to 0xfe600000 for dram barrier
  138. [ 0.336883] print_constraints: dummy:
  139. [ 0.337219] NET: Registered protocol family 16
  140. [ 0.337677] Trying to unpack rootfs image as initramfs...
  141. [ 0.347625] GPMC revision 6.0
  142. [ 0.347747] mpu.0: alias fck already exists
  143. [ 0.348083] iva.0: alias fck already exists
  144. [ 0.349517] OMAP GPIO hardware version 0.1
  145. [ 0.351226] omap_mux_init: Add partition: #1: core, flags: 2
  146. [ 0.352264] omap_mux_init: Add partition: #2: wkup, flags: 2
  147. [ 0.364013] SRAM: Mapped pa 0x40300000 to va 0xf0840000 size: 0xd000
  148. [ 0.367614] _omap_mux_init_gpio: Could not set gpio7
  149. [ 0.367675] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  150. [ 0.367706] hw-breakpoint: maximum watchpoint size is 4 bytes.
  151. [ 0.373901] omap_ipussdev_init: could not look up fdif
  152. [ 0.374847] OMAP DMA hardware revision 0.0
  153. [ 0.383422] bio: create slab <bio-0> at 0
  154. [ 0.384399] print_constraints: vwl1271: 1800 mV
  155. [ 0.385772] i2c-core: driver [twl] using legacy suspend method
  156. [ 0.385772] i2c-core: driver [twl] using legacy resume method
  157. [ 0.386596] SCSI subsystem initialized
  158. [ 0.388275] usbcore: registered new interface driver usbfs
  159. [ 0.388336] usbcore: registered new interface driver hub
  160. [ 0.388580] usbcore: registered new device driver usb
  161. [ 0.400787] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
  162. [ 0.401550] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  163. [ 0.402099] twl6030: PIH (irq 39) chaining IRQs 368..387
  164. [ 0.402832] print_constraints: VUSB: 3300 mV normal standby
  165. [ 0.605743] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
  166. [ 0.606842] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
  167. [ 0.607391] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  168. [ 0.607910] print_constraints: VUSIM: 1200 <--> 2900 mV at 1800 mV normal standby
  169. [ 0.608520] print_constraints: VCXIO: 1800 mV normal standby
  170. [ 0.608886] print_constraints: VDAC: 1800 mV normal standby
  171. [ 0.609405] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby
  172. [ 0.609436] twl_reg twl_reg.37: Failed to set supply vmmc
  173. [ 0.609558] twl_reg twl_reg.37: can't register VAUX1_6030, -16
  174. [ 0.609588] twl_reg: probe of twl_reg.37 failed with error -16
  175. [ 0.610046] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
  176. [ 0.610565] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
  177. [ 0.610931] print_constraints: CLK32KG:
  178. [ 0.611297] print_constraints: VANA: 2100 mV normal standby
  179. [ 0.621887] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
  180. [ 0.637145] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
  181. [ 0.652374] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
  182. [ 0.653198] iommu_enable: NULL arch_iommu
  183. [ 0.653228] omap-iommu omap-iommu.0: can't get omap iommu: -19
  184. [ 0.653228] omap-iommu omap-iommu.0: can't attach iommu device: -19
  185. [ 0.653320] omap-iommu omap-iommu.1: tesla registered
  186. [ 0.653503] Advanced Linux Sound Architecture Driver Version 1.0.24.
  187. [ 0.654174] NetLabel: Initializing
  188. [ 0.654174] NetLabel: domain hash size = 128
  189. [ 0.654174] NetLabel: protocols = UNLABELED CIPSOv4
  190. [ 0.654235] NetLabel: unlabeled traffic allowed by default
  191. [ 0.654724] Switching to clocksource 32k_counter
  192. [ 0.675048] FS-Cache: Loaded
  193. [ 0.675354] AppArmor: AppArmor Filesystem Enabled
  194. [ 0.690338] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  195. [ 0.691009] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
  196. [ 0.691314] NET: Registered protocol family 2
  197. [ 0.691711] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  198. [ 0.692993] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  199. [ 0.695220] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  200. [ 0.696472] TCP: Hash tables configured (established 131072 bind 65536)
  201. [ 0.696502] TCP reno registered
  202. [ 0.696502] UDP hash table entries: 512 (order: 2, 16384 bytes)
  203. [ 0.696563] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  204. [ 0.697113] NET: Registered protocol family 1
  205. [ 0.747131] Freeing initrd memory: 4184K
  206. [ 1.038818] ipu-power ipu0: Test of writing to the device message log,done from ipu_pm_init
  207. [ 1.038818] ipu-power initialized ipu, major: 253, minor: 0
  208. [ 1.039398] iovmm-omap initialized ducati, major: 252, base-minor: 0
  209. [ 1.039642] iovmm-omap initialized tesla, major: 252, base-minor: 1
  210. [ 1.040618] omap-remoteproc omap-remoteproc.0: omap_rproc_probe: adding rproc tesla
  211. [ 1.040863] omap-remoteproc omap-remoteproc.0: omap-rproc initialized tesla, major: 251, base-minor: 0
  212. [ 1.040893] omap-remoteproc omap-remoteproc.1: omap_rproc_probe: adding rproc ducati-proc0
  213. [ 1.041107] omap-remoteproc omap-remoteproc.1: omap-rproc initialized ducati-proc0, major: 251, base-minor: 1
  214. [ 1.041137] omap-remoteproc omap-remoteproc.2: omap_rproc_probe: adding rproc ducati-proc1
  215. [ 1.041351] omap-remoteproc omap-remoteproc.2: omap-rproc initialized ducati-proc1, major: 251, base-minor: 2
  216. [ 1.042053] audit: initializing netlink socket (disabled)
  217. [ 1.042114] type=2000 audit(1.015:1): initialized
  218. [ 1.152770] highmem bounce pool size: 64 pages
  219. [ 1.162170] VFS: Disk quotas dquot_6.5.2
  220. [ 1.162689] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  221. [ 1.166351] fuse init (API version 7.17)
  222. [ 1.166961] msgmni has been set to 1489
  223. [ 1.168731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  224. [ 1.168853] io scheduler noop registered
  225. [ 1.168884] io scheduler deadline registered
  226. [ 1.168945] io scheduler cfq registered (default)
  227. [ 1.169647] OMAP DSS rev 4.0
  228. [ 1.193145] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  229. [ 1.311096] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  230. [ 1.436096] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  231. [ 2.495849] console [ttyO2] enabled
  232. [ 2.568908] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  233. [ 2.647460] [drm] Initialized drm 1.1.0 20060810
  234. [ 2.653076] brd: module loaded
  235. [ 2.661407] loop: module loaded
  236. [ 2.664886] (stk) :sysfs entries created
  237. [ 2.669097] (stk) : debugfs entries created
  238. [ 2.674316] Non-trimmed BGAP, Temp not accurate
  239. [ 2.679321] thermal_sensor_dev_register:Need to init the cpu domain
  240. [ 2.688964] twl: i2c_read failed to transfer all messages
  241. [ 2.694885] twl: i2c_write failed to transfer all messages
  242. [ 2.701019] twl: i2c_read failed to transfer all messages
  243. [ 2.706878] twl: i2c_read failed to transfer all messages
  244. [ 2.712707] twl: i2c_read failed to transfer all messages
  245. [ 2.718536] twl: i2c_write failed to transfer all messages
  246. [ 2.724456] twl: i2c_read failed to transfer all messages
  247. [ 2.730255] twl: i2c_write failed to transfer all messages
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!