vfp-boot.log

console=ttyS0 root=/dev/sda2





Loading vmlinuz... ok
Loading initrd...ok
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.38-ltsi-rt34-WR6.0.0.12_preempt-rt (builder@svl-junos-p001) (gcc version 4.8.1 (Wind River Linux Sourcery CodeBench 4.8-28) ) #1 SMP PREEMPT RT Tue Jul 7 15:06:54 PDT 2015
Command line: BOOT_IMAGE=vmlinuz rootwait max_loop=255 rw clock=pit console=ttyS0,115200 root=/dev/sda2 initrd=initrd
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfffdfff] usable
BIOS-e820: [mem 0x00000000bfffe000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001ae3fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
No AGP bridge found
e820: last_pfn = 0x1ae400 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbfffe max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0b30-0x000f0b3f] mapped at [ffff8800000f0b30]
Scanning 1 areas for low memory corruption
init_memory_mapping: [mem 0x00000000-0x000fffff]
init_memory_mapping: [mem 0x1ae200000-0x1ae3fffff]
init_memory_mapping: [mem 0x1ac000000-0x1ae1fffff]
init_memory_mapping: [mem 0x180000000-0x1abffffff]
init_memory_mapping: [mem 0x00100000-0xbfffdfff]
init_memory_mapping: [mem 0x100000000-0x17fffffff]
RAMDISK: [mem 0x7ff4a000-0x7fffffff]
ACPI: RSDP 00000000000f0920 00014 (v00 BOCHS )
ACPI: RSDT 00000000bffffc93 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000bffff1c0 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000bfffe040 01180 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 00000000bfffe000 00040
ACPI: SSDT 00000000bffff234 0099F (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000bffffbd3 00088 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 00000000bffffc5b 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001ae3fffff]
Initmem setup node 0 [mem 0x00000000-0x1ae3fffff]
  NODE_DATA [mem 0x1ae3f9000-0x1ae3fcfff]
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x1ae3fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xbfffdfff]
  node   0: [mem 0x100000000-0x1ae3fffff]
ACPI: PM-Timer IO Port: 0xb008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 3 CPUs, 0 hotplug CPUs
e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:3 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff8801ae000000 s74432 r8192 d23872 u524288
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1476599
Policy zone: Normal
Kernel command line: BOOT_IMAGE=vmlinuz rootwait max_loop=255 rw clock=pit console=ttyS0,115200 root=/dev/sda2 initrd=initrd
Warning! clock= boot option is deprecated. Use clocksource=xyz
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 5820628k/7049216k available (8672k kernel code, 1048976k absent, 179612k reserved, 6575k data, 1172k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=3, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=3.
NR_IRQS:4352 nr_irqs:704 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
allocated 96468992 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: HPET/PMTIMER calibration failed
tsc: Marking TSC unstable due to could not calculate TSC khz
Calibrating delay loop... 1478.65 BogoMIPS (lpj=739328)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift: 5
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 30514 entries in 120 pages
------------[ cut here ]------------
WARNING: at /volume/build/junos/14.1/release/14.1R5.4-1-vmx/mx86-pfe/vpfe-build/wrlinux-vmx/build-project/bitbake_build/tmp/work/qemux86_64-wrs-linux/linux-windriver/3.10-r0/linux/arch/x86/kernel/apic/apic.c:1370 setup_local_APIC+0x1ab/0x28c()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.38-ltsi-rt34-WR6.0.0.12_preempt-rt #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 0000000000000009 ffff8801a0501db0 ffffffff8186d942 ffff8801a0501de8
 ffffffff8103cf41 0000000000000000 00000000000000f0 0000000000000000
 00000000ffffffff 0000000000000001 ffff8801a0501df8 ffffffff8103d03a
Call Trace:
 [<ffffffff8186d942>] dump_stack+0x19/0x1b
 [<ffffffff8103cf41>] warn_slowpath_common+0x61/0xa0
 [<ffffffff8103d03a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff8186433a>] setup_local_APIC+0x1ab/0x28c
 [<ffffffff81f06106>] native_smp_prepare_cpus+0x379/0x43b
 [<ffffffff81ef9f02>] kernel_init_freeable+0xe7/0x262
 [<ffffffff81873457>] ? _raw_spin_unlock_irq+0x17/0x50
 [<ffffffff8106f60e>] ? finish_task_switch+0x4e/0xc0
 [<ffffffff8185a550>] ? rest_init+0x90/0x90
 [<ffffffff8185a55e>] kernel_init+0xe/0x190
 [<ffffffff8187425c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8185a550>] ? rest_init+0x90/0x90
---[ end trace 0000000000000001 ]---
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... works.
smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (fam: 06, model: 2a, stepping: 01)
divide error: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.10.38-ltsi-rt34-WR6.0.0.12_preempt-rt #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff8801a04f8000 ti: ffff8801a0500000 task.ti: ffff8801a0500000
RIP: 0010:[<ffffffff8108fd24>]  [<ffffffff8108fd24>] clockevents_config.part.2+0x24/0xa0
RSP: 0000:ffff8801a0501db8  EFLAGS: 00010246
RAX: ffffffffffffffff RBX: ffff8801ae00adc0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
RBP: ffff8801a0501dd0 R08: 0000000000000001 R09: ffffffff820498fa
R10: 0000000000000052 R11: 00000000ffffffff R12: ffff8801ae000000
R13: 0000000000000018 R14: 0000000000009010 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8801ae000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff8801ae3ff000 CR3: 0000000001e0e000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffff8801ae00adc0 ffff8801ae000000 0000000000000018 ffff8801a0501de8
 ffffffff8108fdc0 ffff8801ae00adc0 ffff8801a0501e00 ffffffff818640a4
 000000000000adc0 ffff8801a0501e48 ffffffff81f07cd4 0000000000000000
Call Trace:
 [<ffffffff8108fdc0>] clockevents_config_and_register+0x20/0x30
 [<ffffffff818640a4>] setup_APIC_timer+0xe0/0xed
 [<ffffffff81f07cd4>] setup_boot_APIC_clock+0x4d6/0x4e3
 [<ffffffff81f061b5>] native_smp_prepare_cpus+0x428/0x43b
 [<ffffffff81ef9f02>] kernel_init_freeable+0xe7/0x262
 [<ffffffff81873457>] ? _raw_spin_unlock_irq+0x17/0x50
 [<ffffffff8106f60e>] ? finish_task_switch+0x4e/0xc0
 [<ffffffff8185a550>] ? rest_init+0x90/0x90
 [<ffffffff8185a55e>] kernel_init+0xe/0x190
 [<ffffffff8187425c>] ret_from_fork+0x7c/0xb0
 [<ffffffff8185a550>] ? rest_init+0x90/0x90
Code: c3 66 0f 1f 44 00 00 66 66 66 66 90 55 31 d2 89 f1 48 89 e5 41 55 89 f6 41 54 41 b8 01 00 00 00 53 48 89 fb 48 8b 7f 70 48 89 f8 <48> f7 f6 48 85 c0 74 0b 48 3d 58 02 00 00 41 89 c0 77 51 4c 8d
RIP  [<ffffffff8108fd24>] clockevents_config.part.2+0x24/0xa0
 RSP <ffff8801a0501db8>
---[ end trace 0000000000000002 ]---
note: swapper/0[1] exited with preempt_count 1
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b