Fondi 7" Tablet (INET-D70-REV03) UART Output

�����w��F�*�����6UTUTUTUUTUTUTUTTUTUTUTUUTUTUPTUTUTUTTUT�TUTUTUTUUTUTUTUTTUTUTUT�UTU��.�HELLO! BOOT0 is starting!
boot0 version : 3.1.0
[DRAM]ver 0.9 clk = 552
dram ok
dram size =512
sum=0x12096098
src_sum=0x12096098
Ready to disable icache.
Jump to secend Boot.
[      0.165]

U-Boot 2011.09-rc1-00010-gd17840a-dirty (Sep 16 2014 - 20:35:55) Allwinner Technology

[      0.175]version: 1.1.0
[      0.189]pmbus:   ready
[      0.191]PMU: AXP221
[      0.193]PMU: AXP22x found
[      0.196]PMU: bat ratio = 3
[      0.199]PMU: dcdc3 1260
[      0.202]PMU: pll1 1008 Mhz
set power on vol to default
dcdc1_vol = 0
dcdc2_vol = 0
dcdc3_vol = 0
dcdc4_vol = 0
dcdc5_vol = 0
aldo2_vol = 0
aldo3_vol = 0
find power_sply to end
vbus pc exist, limit to pc
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.321]DRAM:  512 MiB
relocation Offset is: 14b0a000
DRV_DISP_Init: opened
[      0.463]fetch script data boot_disp.output_type fail
[      0.469]fetch script data boot_disp.output_mode fail
[      0.474]fetch script data boot_disp.auto_hpd fail
[      0.479]lcd0_para.lcd_used=1
workmode = 0
[      0.494]NAND: NAND_UbootInit
NAND_UbootInit start
NB1 : enter NAND_LogicInit
uboot:physical version: 2 15 20140508 1840
nand : get id_number_ctl fail, 0
uboot:nand info: 9384d798 ffff5072 11580 110705 4
not burn nand partition table!
NB1 : nftl num: 2
 init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[      1.650]sunxi flash init ok
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-
bootloader  : 1000000       2000000
env         : 3000000       1000000
boot        : 4000000       1000000
system      : 5000000       30000000
data        : 35000000      32000000
misc        : 67000000      1000000
recovery    : 68000000      2000000
cache       : 6a000000      20000000
databk      : 8a000000      8000000
private     : 92000000      1000000
UDISK       : 93000000      0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 100, low 2
cant find fstbt value
misc partition found
to be run cmd=run setargs_nand boot_normal
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
[      1.749]power status = 3
[      1.752]stage1 result 1
[      1.754]pre sys mode
[      1.757]stage2 result -1
sunxi_bmp_display
[      1.836]Hit any key to stop autoboot:  0
read boot or recovery all
[      2.397]sunxi flash read :offset 4000000, 12683720 bytes OK
no signature
[      2.409]ready to boot
NAND_UbootExit
NB1 : NAND_LogicExit
nand release dma:5ebad030
dma 0x5ebad030 int is not used yet
dma 0x5ebad030 int is free, you do not need to free it again
[      2.411]
Starting kernel ...