API tools faq
paste
Advertisement
Guest User

errorcodegantrykin

a guest
Sep 26th, 2011
84
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.81 KB | None | 0 0
raw download clone embed print report
  1. [ 0.221584] pci 0000:02:1f.0: setting latency timer to 64
  2. [ 0.221598] pci 0000:00:1e.0: setting latency timer to 64
  3. [ 0.221607] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  4. [ 0.221612] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  5. [ 0.221617] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfdffffff]
  6. [ 0.221622] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
  7. [ 0.221627] pci_bus 0000:02: resource 1 mem: [0xefa00000-0xefafffff]
  8. [ 0.221632] pci_bus 0000:03: resource 1 mem: [0xefa00000-0xefafffff]
  9. [ 0.221638] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
  10. [ 0.221642] pci_bus 0000:04: resource 1 mem: [0xefb00000-0xefffffff]
  11. [ 0.221647] pci_bus 0000:04: resource 2 pref mem [0x60000000-0x601fffff]
  12. [ 0.221652] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
  13. [ 0.221657] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
  14. [ 0.221724] NET: Registered protocol family 2
  15. [ 0.221915] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. [ 0.222638] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  17. [ 0.224035] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  18. [ 0.224845] TCP: Hash tables configured (established 131072 bind 65536)
  19. [ 0.224856] TCP reno registered
  20. [ 0.225121] NET: Registered protocol family 1
  21. [ 0.225229] pci 0000:01:00.0: Boot video device
  22. [ 0.225284] pci 0000:04:07.0: Firmware left e100 interrupts enabled; disabling
  23. [ 0.225586] Scanning for low memory corruption every 60 seconds
  24. [ 0.225793] audit: initializing netlink socket (disabled)
  25. [ 0.225817] type=2000 audit(1317002862.222:1): initialized
  26. [ 0.234214] highmem bounce pool size: 64 pages
  27. [ 0.234226] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  28. [ 0.236967] VFS: Disk quotas dquot_6.5.2
  29. [ 0.237089] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  30. [ 0.238221] fuse init (API version 7.13)
  31. [ 0.238380] msgmni has been set to 1693
  32. [ 0.238855] alg: No test for stdrng (krng)
  33. [ 0.239002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  34. [ 0.239009] io scheduler noop registered
  35. [ 0.239013] io scheduler anticipatory registered
  36. [ 0.239017] io scheduler deadline registered
  37. [ 0.239095] io scheduler cfq registered (default)
  38. [ 0.239354] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  39. [ 0.239404] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  40. [ 0.242213] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  41. [ 0.242348] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  42. [ 0.242475] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  43. [ 0.242836] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  44. [ 0.243077] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  45. [ 0.245329] brd: module loaded
  46. [ 0.246268] loop: module loaded
  47. [ 0.246484] input: Macintosh mouse button emulation as /devices/virtual/input/input0
  48. [ 0.246689] ata_piix 0000:00:1f.1: version 2.13
  49. [ 0.246797] ata_piix 0000:00:1f.1: setting latency timer to 64
  50. [ 0.247060] scsi0 : ata_piix
  51. [ 0.247218] scsi1 : ata_piix
  52. [ 0.247290] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2040 irq 14
  53. [ 0.247296] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15
  54. [ 0.247995] Fixed MDIO Bus: probed
  55. [ 0.248068] PPP generic driver version 2.4.2
  56. [ 0.248169] tun: Universal TUN/TAP device driver, 1.6
  57. [ 0.248173] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  58. [ 0.248369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  59. [ 0.248407] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  60. [ 0.248440] uhci_hcd: USB Universal Host Controller Interface driver
  61. [ 0.248504] uhci_hcd 0000:00:1f.2: PCI->APIC IRQ transform: INT D -> IRQ 19
  62. [ 0.248519] uhci_hcd 0000:00:1f.2: setting latency timer to 64
  63. [ 0.248526] uhci_hcd 0000:00:1f.2: UHCI Host Controller
  64. [ 0.248594] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
  65. [ 0.248636] uhci_hcd 0000:00:1f.2: irq 19, io base 0x00002000
  66. [ 0.248864] usb usb1: configuration #1 chosen from 1 choice
  67. [ 0.248920] hub 1-0:1.0: USB hub found
  68. [ 0.248937] hub 1-0:1.0: 2 ports detected
  69. [ 0.249040] uhci_hcd 0000:00:1f.4: PCI->APIC IRQ transform: INT C -> IRQ 23
  70. [ 0.249052] uhci_hcd 0000:00:1f.4: setting latency timer to 64
  71. [ 0.249058] uhci_hcd 0000:00:1f.4: UHCI Host Controller
  72. [ 0.249120] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
  73. [ 0.249153] uhci_hcd 0000:00:1f.4: irq 23, io base 0x00002020
  74. [ 0.249327] usb usb2: configuration #1 chosen from 1 choice
  75. [ 0.249378] hub 2-0:1.0: USB hub found
  76. [ 0.249399] hub 2-0:1.0: 2 ports detected
  77. [ 0.249596] PNP: PS/2 Controller [PNP0303,PNP0f0e] at 0x60,0x64 irq 1,12
  78. [ 0.251051] isapnp: Scanning for PnP cards...
  79. [ 0.258302] serio: i8042 KBD port at 0x60,0x64 irq 1
  80. [ 0.258315] serio: i8042 AUX port at 0x60,0x64 irq 12
  81. [ 0.258569] mice: PS/2 mouse device common for all mice
  82. [ 0.258773] rtc_cmos 00:0e: rtc core: registered rtc_cmos as rtc0
  83. [ 0.258804] rtc0: alarms up to one day, 114 bytes nvram
  84. [ 0.259038] device-mapper: uevent: version 1.0.3
  85. [ 0.302874] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  86. [ 0.370653] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  87. [ 0.434195] device-mapper: multipath: version 1.1.0 loaded
  88. [ 0.434202] device-mapper: multipath round-robin: version 1.0.0 loaded
  89. [ 0.478274] ata2.01: NODEV after polling detection
  90. [ 0.478683] EISA: Probing bus 0 at eisa.0
  91. [ 0.478695] Cannot allocate resource for EISA slot 1
  92. [ 0.478699] Cannot allocate resource for EISA slot 2
  93. [ 0.478763] EISA: Detected 0 cards.
  94. [ 0.478769] cpuidle: using governor ladder
  95. [ 0.478773] cpuidle: using governor menu
  96. [ 0.479638] TCP cubic registered
  97. [ 0.479873] NET: Registered protocol family 10
  98. [ 0.480767] lo: Disabled Privacy Extensions
  99. [ 0.481412] NET: Registered protocol family 17
  100. [ 0.481487] Using IPI No-Shortcut mode
  101. [ 0.481669] registered taskstats version 1
  102. [ 0.482111] rtc_cmos 00:0e: setting system clock to 2011-09-26 02:07:43 UTC (1317002863)
  103. [ 0.482118] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  104. [ 0.482122] EDD information not available.
  105. [ 0.526612] ata2.00: ATAPI: HP DVD Writer 630, CH16, max UDMA/33
  106. [ 0.526755] ata1.00: HPA unlocked: 234372887 -> 234375000, native 234375000
  107. [ 0.526764] ata1.00: ATA-6: ST3120026A, 3.16, max UDMA/100
  108. [ 0.526769] ata1.00: 234375000 sectors, multi 16: LBA48
  109. [ 0.614362] isapnp: No Plug & Play device found
  110. [ 0.615014] ata2.00: configured for UDMA/33
  111. [ 0.615317] ata1.00: configured for UDMA/100
  112. [ 0.615576] scsi 0:0:0:0: Direct-Access ATA ST3120026A 3.16 PQ: 0 ANSI: 5
  113. [ 0.615914] sd 0:0:0:0: [sda] 234375000 512-byte logical blocks: (120 GB/111 GiB)
  114. [ 0.615925] sd 0:0:0:0: Attached scsi generic sg0 type 0
  115. [ 0.616180] sd 0:0:0:0: [sda] Write Protect is off
  116. [ 0.616186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  117. [ 0.616241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  118. [ 0.616552] sda:
  119. [ 0.618166] scsi 1:0:0:0: CD-ROM HP DVD Writer 630c CH16 PQ: 0 ANSI: 5
  120. [ 0.625591] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
  121. [ 0.625600] Uniform CD-ROM driver Revision: 3.20
  122. [ 0.625796] sr 1:0:0:0: Attached scsi CD-ROM sr0
  123. [ 0.625908] sr 1:0:0:0: Attached scsi generic sg1 type 5
  124. [ 0.630297] sda1 sda2 < sda5 >
  125. [ 0.656335] sd 0:0:0:0: [sda] Attached SCSI disk
  126. [ 0.657633] Freeing initrd memory: 12811k freed
  127. [ 0.667024] usb 1-2: new low speed USB device using uhci_hcd and address 2
  128. [ 0.678295] Freeing unused kernel memory: 620k freed
  129. [ 0.679416] Write protecting the kernel text: 4540k
  130. [ 0.679494] Write protecting the kernel read-only data: 1668k
  131. [ 0.725266] udev: starting version 151
  132. [ 0.849831] usb 1-2: configuration #1 chosen from 1 choice
  133. [ 0.867979] Linux agpgart interface v0.103
  134. [ 0.905506] agpgart-intel 0000:00:00.0: Intel i860 Chipset
  135. [ 0.906712] [drm] Initialized drm 1.1.0 20060810
  136. [ 0.911405] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
  137. [ 0.924726] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  138. [ 0.924732] e100: Copyright(c) 1999-2006 Intel Corporation
  139. [ 0.924829] e100 0000:04:07.0: PCI->APIC IRQ transform: INT A -> IRQ 17
  140. [ 0.989662] usbcore: registered new interface driver hiddev
  141. [ 0.991227] nouveau 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
  142. [ 0.995927] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018500c1)
  143. [ 0.996058] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
  144. [ 1.017516] e100 0000:04:07.0: PME# disabled
  145. [ 1.027353] e100: eth0: e100_probe: addr 0xefb00000, irq 17, MAC addr 00:02:a5:fc:f6:d9
  146. [ 1.027444] aic7xxx 0000:04:0d.0: PCI->APIC IRQ transform: INT A -> IRQ 22
  147. [ 1.172689] [drm] nouveau 0000:01:00.0: ... appears to be valid
  148. [ 1.172832] [drm] nouveau 0000:01:00.0: BMP BIOS found
  149. [ 1.172837] [drm] nouveau 0000:01:00.0: BMP version 5.40
  150. [ 1.172843] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.39
  151. [ 1.172849] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
  152. [ 1.172856] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
  153. [ 1.172862] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40
  154. [ 1.172866] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01010312 00000000
  155. [ 1.172871] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 33000303
  156. [ 1.172982] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
  157. [ 1.172988] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xECD4
  158. [ 1.173564] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.0/input/input2
  159. [ 1.173776] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1f.2-2/input0
  160. [ 1.173832] usbcore: registered new interface driver usbhid
  161. [ 1.173839] usbhid: v2.6:USB HID core driver
  162. [ 1.188557] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF1CC
  163. [ 1.188592] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE56
  164. [ 1.208519] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF53F
  165. [ 1.208530] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF55C
  166. [ 1.208538] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF041
  167. [ 1.232525] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF167
  168. [ 1.247777] [TTM] Zone kernel: Available graphics memory: 440216 kiB.
  169. [ 1.247782] [TTM] Zone highmem: Available graphics memory: 771932 kiB.
  170. [ 1.247803] [drm] nouveau 0000:01:00.0: 128 MiB VRAM
  171. [ 1.247893] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
  172. [ 1.247923] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
  173. [ 1.247961] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
  174. [ 1.248020] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
  175. [ 1.248448] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
  176. [ 1.249264] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
  177. [ 1.249283] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
  178. [ 1.249295] [drm] nouveau 0000:01:00.0: Saving VGA fonts
  179. [ 1.309821] [drm] nouveau 0000:01:00.0: Detected a VGA connector
  180. [ 1.309925] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
  181. [ 1.309983] [drm] nouveau 0000:01:00.0: Detected a TV connector
  182. [ 1.311960] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
  183. [ 1.311967] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
  184. [ 1.311973] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
  185. [ 1.311980] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
  186. [ 1.684228] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo f68b3000
  187. [ 1.684503] fb0: nouveaufb frame buffer device
  188. [ 1.684508] registered panic notifier
  189. [ 1.684520] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
  190. [ 1.688112] vga16fb: initializing
  191. [ 1.688120] vga16fb: mapped to 0xc00a0000
  192. [ 1.688128] vga16fb: not registering due to another framebuffer present
  193. [ 2.360453] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
  194. [ 2.360461] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
  195. [ 2.363909] Console: switching to colour frame buffer device 128x48
  196. [ 16.240038] scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
  197. [ 16.240041] <Adaptec aic7899 Ultra160 SCSI adapter>
  198. [ 16.240042] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
  199. [ 16.240044]
  200. [ 16.240351] aic7xxx 0000:04:0d.1: PCI->APIC IRQ transform: INT B -> IRQ 16
  201. [ 31.452037] scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
  202. [ 31.452040] <Adaptec aic7899 Ultra160 SCSI adapter>
  203. [ 31.452042] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
  204. [ 31.452044]
  205. [ 31.772252] xor: automatically using best checksumming function: pIII_sse
  206. [ 31.792002] pIII_sse : 3106.000 MB/sec
  207. [ 31.792007] xor: using function: pIII_sse (3106.000 MB/sec)
  208. [ 31.796690] device-mapper: dm-raid45: initialized v0.2594b
  209. [ 31.956751] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  210. [ 31.956763] EXT4-fs (sda1): write access will be enabled during recovery
  211. [ 34.036084] EXT4-fs (sda1): orphan cleanup on readonly fs
  212. [ 34.036108] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4980780
  213. [ 34.036180] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6298438
  214. [ 34.036382] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1600742
  215. [ 34.059028] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2359656
  216. [ 34.059106] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2359404
  217. [ 34.059144] EXT4-fs (sda1): 5 orphan inodes deleted
  218. [ 34.059152] EXT4-fs (sda1): recovery complete
  219. [ 34.278903] EXT4-fs (sda1): mounted filesystem with ordered data mode
  220. [ 41.235130] udev: starting version 151
  221. [ 41.254574] Adding 4519928k swap on /dev/sda5. Priority:-1 extents:1 across:4519928k
  222. [ 41.284301] lp: driver loaded but no devices found
  223. [ 41.357958] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  224. [ 41.395072] intel_rng: FWH not detected
  225. [ 41.635633] cfg80211: Calling CRDA to update world regulatory domain
  226. [ 41.749470] type=1505 audit(1317002904.765:2): operation="profile_load" pid=458 name="/sbin/dhclient3"
  227. [ 41.750142] type=1505 audit(1317002904.765:3): operation="profile_load" pid=458 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  228. [ 41.750521] type=1505 audit(1317002904.765:4): operation="profile_load" pid=458 name="/usr/lib/connman/scripts/dhclient-script"
  229. [ 41.789556] cfg80211: World regulatory domain updated:
  230. [ 41.789566] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  231. [ 41.789572] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  232. [ 41.789578] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  233. [ 41.789583] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  234. [ 41.789588] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  235. [ 41.789594] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  236. [ 41.852703] ENS1371 0000:04:06.0: PCI->APIC IRQ transform: INT A -> IRQ 20
  237. [ 41.963480] type=1505 audit(1317002904.977:5): operation="profile_load" pid=558 name="/usr/share/gdm/guest-session/Xsession"
  238. [ 41.969820] type=1505 audit(1317002904.985:6): operation="profile_replace" pid=559 name="/sbin/dhclient3"
  239. [ 41.970524] type=1505 audit(1317002904.985:7): operation="profile_replace" pid=559 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  240. [ 41.970917] type=1505 audit(1317002904.985:8): operation="profile_replace" pid=559 name="/usr/lib/connman/scripts/dhclient-script"
  241. [ 41.979957] type=1505 audit(1317002904.993:9): operation="profile_load" pid=562 name="/usr/bin/evince"
  242. [ 41.988930] type=1505 audit(1317002905.005:10): operation="profile_load" pid=562 name="/usr/bin/evince-previewer"
  243. [ 41.994421] type=1505 audit(1317002905.009:11): operation="profile_load" pid=562 name="/usr/bin/evince-thumbnailer"
  244. [ 42.338201] e100 0000:04:07.0: firmware: requesting e100/d101m_ucode.bin
  245. [ 42.376898] ADDRCONF(NETDEV_UP): eth0: link is not ready
  246. [ 42.807638] rtl8180 0000:04:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 21
  247. [ 42.868353] ppdev: user-space parallel port driver
  248. [ 43.158043] phy0: Selected rate control algorithm 'minstrel'
  249. [ 43.159524] phy0: hwaddr 00:0e:2e:6d:4f:9c, RTL8185vD + rtl8225
  250. [ 43.836443] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
  251. [ 43.838016] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
  252. [ 43.969913] CPU0 attaching NULL sched-domain.
  253. [ 43.969929] CPU1 attaching NULL sched-domain.
  254. [ 43.992192] CPU0 attaching sched-domain:
  255. [ 43.992200] domain 0: span 0-1 level CPU
  256. [ 43.992206] groups: 0 1
  257. [ 43.992220] CPU1 attaching sched-domain:
  258. [ 43.992224] domain 0: span 0-1 level CPU
  259. [ 43.992231] groups: 1 0
  260. [ 46.732263] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  261. [ 48.031548] CPU0 attaching NULL sched-domain.
  262. [ 48.031564] CPU1 attaching NULL sched-domain.
  263. [ 48.052735] CPU0 attaching sched-domain:
  264. [ 48.052744] domain 0: span 0-1 level CPU
  265. [ 48.052751] groups: 0 1
  266. [ 48.052767] CPU1 attaching sched-domain:
  267. [ 48.052771] domain 0: span 0-1 level CPU
  268. [ 48.052778] groups: 1 0
  269. [ 65.424143] wlan0: deauthenticating from 00:0f:66:d0:ff:43 by local choice (reason=3)
  270. [ 65.488028] wlan0: direct probe to AP 00:0f:66:d0:ff:43 (try 1)
  271. [ 65.490413] wlan0: direct probe responded
  272. [ 65.490423] wlan0: authenticate with AP 00:0f:66:d0:ff:43 (try 1)
  273. [ 65.492727] wlan0: authenticated
  274. [ 65.492772] wlan0: associate with AP 00:0f:66:d0:ff:43 (try 1)
  275. [ 65.495406] wlan0: RX AssocResp from 00:0f:66:d0:ff:43 (capab=0x411 status=0 aid=9)
  276. [ 65.495412] wlan0: associated
  277. [ 65.496551] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  278. [ 75.680019] wlan0: no IPv6 routers present
  279. [11728.636662] I-pipe: Domain RTAI registered.
  280. [11728.636676] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  281. [11728.636681] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  282. [11728.636802] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  283. [11728.636808] PIPELINE layers:
  284. [11728.636814] fa82ce20 9ac15d93 RTAI 200
  285. [11728.636819] c085cb20 0 Linux 100
  286. [11728.680478] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  287. [11728.680846] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  288. [11728.680857] RTAI[sched]: hard timer type/freq = APIC/6179443(Hz); default timing: periodic; linear timed lists.
  289. [11728.680864] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2372845000 hz.
  290. [11728.680869] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  291. [11728.681036] RTAI[usi]: enabled.
  292. [11728.783166] RTAI[math]: loaded.
  293. [11749.978362] RTAI[math]: unloaded.
  294. [11750.044499] SCHED releases registered named ALIEN RTGLBH
  295. [11750.076560] RTAI[malloc]: unloaded.
  296. [11750.176023] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  297. [11750.183893] I-pipe: Domain RTAI unregistered.
  298. [11750.184038] RTAI[hal]: unmounted.
  299. [12127.920703] I-pipe: Domain RTAI registered.
  300. [12127.920714] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  301. [12127.920719] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  302. [12127.920831] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  303. [12127.920836] PIPELINE layers:
  304. [12127.920842] fb744e20 9ac15d93 RTAI 200
  305. [12127.920847] c085cb20 0 Linux 100
  306. [12127.957328] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  307. [12127.957844] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  308. [12127.957856] RTAI[sched]: hard timer type/freq = APIC/6179443(Hz); default timing: periodic; linear timed lists.
  309. [12127.957863] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2372845000 hz.
  310. [12127.957868] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  311. [12127.958026] RTAI[usi]: enabled.
  312. [12128.039895] RTAI[math]: loaded.
  313. [12128.157406] GANTRYKINS: joints[0] = 0
  314. [12128.157414] GANTRYKINS: joints[1] = 1
  315. [12128.157420] GANTRYKINS: joints[2] = 2
  316. [12128.157425] GANTRYKINS: joints[3] = 3
  317. [12128.157431] GANTRYKINS: joints[4] = 4
  318. [12128.157437] GANTRYKINS: joints[5] = 5
  319. [12128.157443] GANTRYKINS: joints[6] = -1
  320. [12128.157450] GANTRYKINS: joints[7] = -1
  321. [12128.157456] GANTRYKINS: joints[8] = -1
  322. [12128.240290] config string '0xa400 0xac00'
  323. [12133.173721] 46507: ERROR: Unexpected realtime delay: check dmesg for details.
  324. [12133.173721]
  325. [12133.173721] In recent history there were
  326. [12133.173721] 247552, 247384, 248812, 248820, and 248920
  327. [12133.173721] elapsed clocks between calls to the motion controller.
  328. [12133.173721] This time, there were 19660736 which is so anomalously
  329. [12133.173721] large that it probably signifies a problem with your
  330. [12133.173721] realtime configuration. For the rest of this run of
  331. [12133.173721] EMC, this message will be suppressed.
  332. [12133.173721]
  333. [12144.920931] RTAI[math]: unloaded.
  334. [12144.988467] SCHED releases registered named ALIEN RTGLBH
  335. [12145.020597] RTAI[malloc]: unloaded.
  336. [12145.120050] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  337. [12145.133572] I-pipe: Domain RTAI unregistered.
  338. [12145.133696] RTAI[hal]: unmounted.
  339. [12165.920553] I-pipe: Domain RTAI registered.
  340. [12165.920566] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  341. [12165.920571] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  342. [12165.920687] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  343. [12165.920691] PIPELINE layers:
  344. [12165.920697] fbed4e20 9ac15d93 RTAI 200
  345. [12165.920702] c085cb20 0 Linux 100
  346. [12165.958728] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  347. [12165.959142] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  348. [12165.959154] RTAI[sched]: hard timer type/freq = APIC/6179443(Hz); default timing: periodic; linear timed lists.
  349. [12165.959161] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2372845000 hz.
  350. [12165.959166] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  351. [12165.959332] RTAI[usi]: enabled.
  352. [12166.057324] RTAI[math]: loaded.
  353. [12166.147608] GANTRYKINS: joints[0] = 0
  354. [12166.147617] GANTRYKINS: joints[1] = 1
  355. [12166.147623] GANTRYKINS: joints[2] = 2
  356. [12166.147628] GANTRYKINS: joints[3] = 3
  357. [12166.147634] GANTRYKINS: joints[4] = 4
  358. [12166.147640] GANTRYKINS: joints[5] = 5
  359. [12166.147646] GANTRYKINS: joints[6] = -1
  360. [12166.147652] GANTRYKINS: joints[7] = -1
  361. [12166.147659] GANTRYKINS: joints[8] = -1
  362. [12166.216793] config string '0xa400 0xac00'
  363. [12198.336545] 305764: ERROR: Unexpected realtime delay: check dmesg for details.
  364. [12198.336545]
  365. [12198.336545] In recent history there were
  366. [12198.336545] 248200, 250004, 250272, 249444, and 247436
  367. [12198.336545] elapsed clocks between calls to the motion controller.
  368. [12198.336545] This time, there were 19659052 which is so anomalously
  369. [12198.336545] large that it probably signifies a problem with your
  370. [12198.336545] realtime configuration. For the rest of this run of
  371. [12198.336545] EMC, this message will be suppressed.
  372. [12198.336545]
  373. [12240.750370] RTAI[math]: unloaded.
  374. [12240.818546] SCHED releases registered named ALIEN RTGLBH
  375. [12240.849736] RTAI[malloc]: unloaded.
  376. [12240.948027] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  377. [12240.956242] I-pipe: Domain RTAI unregistered.
  378. [12240.956378] RTAI[hal]: unmounted.
  379. [15973.392622] I-pipe: Domain RTAI registered.
  380. [15973.392634] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
  381. [15973.392638] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
  382. [15973.392762] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
  383. [15973.392767] PIPELINE layers:
  384. [15973.392773] faa6ce20 9ac15d93 RTAI 200
  385. [15973.392778] c085cb20 0 Linux 100
  386. [15973.430844] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
  387. [15973.431261] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
  388. [15973.431273] RTAI[sched]: hard timer type/freq = APIC/6179443(Hz); default timing: periodic; linear timed lists.
  389. [15973.431280] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2372845000 hz.
  390. [15973.431296] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
  391. [15973.431469] RTAI[usi]: enabled.
  392. [15973.515770] RTAI[math]: loaded.
  393. [15973.587269] GANTRYKINS: joints[0] = 0
  394. [15973.587277] GANTRYKINS: joints[1] = 1
  395. [15973.587282] GANTRYKINS: joints[2] = 2
  396. [15973.587288] GANTRYKINS: joints[3] = 1
  397. [15973.587294] GANTRYKINS: joints[4] = -1
  398. [15973.587300] GANTRYKINS: joints[5] = -1
  399. [15973.587305] GANTRYKINS: joints[6] = -1
  400. [15973.587312] GANTRYKINS: joints[7] = -1
  401. [15973.587318] GANTRYKINS: joints[8] = -1
  402. [15973.609135] trivkins: exports duplicate symbol kinematicsInverse (owned by gantrykins)
  403. [15974.357355] RTAI[math]: unloaded.
  404. [15974.409423] SCHED releases registered named ALIEN RTGLBH
  405. [15974.443933] RTAI[malloc]: unloaded.
  406. [15974.540026] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
  407. [15974.547557] I-pipe: Domain RTAI unregistered.
  408. [15974.547689] RTAI[hal]: unmounted.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!