Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Sun Jun 2 18:52:14 UTC 2013
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32.54-ubiboot-02 (juice@osiris) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 PREEMPT Fri May 31 11:04:03 EEST 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: Nokia RM-696 board
- [ 0.000000] Overriding kernel command line
- [ 0.000000] Original command line: init=/sbin/preinit root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=sw_rst bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-size=73 dbi-uid=0137454C530016004C24 imei=357923041317688 g_nokia.iSerialNumber=357923041317688 serialnumber=CCM976757 omap_sec.kci=958 gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1507
- [ 0.000000] Reserving 14680064 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3630 ES1.2-hs (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- [ 0.000000] On node 0 totalpages: 257024
- [ 0.000000] free_area_init_node: node 0, pgdat b0fc7030, node_mem_map b1005000
- [ 0.000000] Normal zone: 2048 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 254976 pages, LIFO batch:31
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254976
- [ 0.000000] Kernel command line: init=/init root=0xB302 rootfstype=ext4 rw console=ttyS0,115200n8 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 5242880 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 1002MB 2MB = 1004MB total
- [ 0.000000] Memory: 997248KB available (5180K code, 473K data, 10568K init, 0K highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:402
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
- [ 0.000000] Reprogramming SDRC clock to 390400000 Hz
- [ 0.000000] GPMC revision 5.0
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP GPIO hardware version 2.5
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000122] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- [ 0.039184] Security Framework initialized
- [ 0.039215] Mount-cache hash table entries: 512
- [ 0.039581] Initializing cgroup subsys ns
- [ 0.039581] Initializing cgroup subsys cpuacct
- [ 0.039611] Initializing cgroup subsys memory
- [ 0.039642] Initializing cgroup subsys devices
- [ 0.039642] Initializing cgroup subsys freezer
- [ 0.039672] CPU: Testing write buffer coherency: ok
- [ 0.040191] devtmpfs: initialized
- [ 0.044555] regulator: core version 0.5
- [ 0.044738] NET: Registered protocol family 16
- [ 0.045501] RM-696 board, rev 1507
- [ 0.046234] MUX: setup AB1_3430_MMC3_CLK (0xfa0021d2): 0x0004 -> 0x011b
- [ 0.046264] MUX: setup AC3_3430_MMC3_CMD (0xfa0021d0): 0x011c -> 0x011b
- [ 0.046295] MUX: setup AE4_3430_MMC3_DAT0 (0xfa002164): 0x011c -> 0x011b
- [ 0.046295] MUX: setup AH3_3430_MMC3_DAT1 (0xfa002166): 0x011c -> 0x011b
- [ 0.046295] MUX: setup AF3_3430_MMC3_DAT2 (0xfa002168): 0x011c -> 0x011b
- [ 0.046325] MUX: setup AE3_3430_MMC3_DAT3 (0xfa00216a): 0x011c -> 0x011b
- [ 0.046569] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0118 -> 0x0000
- [ 0.046569] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0118 -> 0x0000
- [ 0.046600] SmartReflex class 1.5 driver: initialized
- [ 0.048522] OMAP DMA hardware revision 5.0
- [ 0.048614] Reserving DMA channels 0 and 1 for HS ROM code
- [ 0.051574] bio: create slab <bio-0> at 0
- [ 0.052001] regulator: VSDIO: 1800 mV normal standby
- [ 0.052124] regulator: vbat: 3700 mV
- [ 0.052246] regulator: VEMMC: 2900 mV normal standby
- [ 0.053497] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2900 kHz
- [ 0.068359] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 0.068359] twl4030: power (irq 373) chaining IRQs 376..383
- [ 0.068786] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 0.069580] regulator: VUSB1V5: 1500 mV normal standby
- [ 0.069732] regulator: VUSB1V8: 1800 mV normal standby
- [ 0.069915] regulator: VUSB3V1: 3100 mV normal standby
- [ 0.071746] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.072509] regulator: VPLL1: 1800 mV normal standby
- [ 0.073883] regulator: VIO: 1800 mV normal standby
- [ 0.074096] regulator: VMMC1: 1850 <--> 3150 mV normal standby
- [ 0.074371] regulator: VDAC: 1800 mV normal standby
- [ 0.074645] regulator: VAUX2: 1800 mV normal standby
- [ 0.075073] regulator: VINTANA1: 1500 mV normal standby
- [ 0.075531] regulator: VINTANA2: 2750 mV normal standby
- [ 0.075988] regulator: VINTDIG: 1500 mV normal standby
- [ 0.076232] regulator: VPLL2: 1800 mV normal standby
- [ 0.076507] regulator: VMMC2: 3000 mV normal standby
- [ 0.076782] regulator: VSIM: 1800 mV normal standby
- [ 0.077056] regulator: VAUX1: 2800 mV normal standby
- [ 0.077362] regulator: VAUX3: 2800 mV normal standby
- [ 0.077636] regulator: VAUX4: 2800 mV normal standby
- [ 0.077911] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- [ 0.086029] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
- [ 0.087280] Bluetooth: Core ver 2.15
- [ 0.087432] NET: Registered protocol family 31
- [ 0.087432] Bluetooth: HCI device and connection manager initialized
- [ 0.087463] Bluetooth: HCI socket layer initialized
- [ 0.087738] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.088043] Switching to clocksource 32k_counter
- [ 0.088745] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
- [ 0.088836] HS USB OTG: revision 0x40, sysconfig 0x2015, sysstatus 0x1, intrfsel 0x1, simenable 0x0
- [ 0.088867] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 0.088897] musb_hdrc: MHDRC RTL version 1.800
- [ 0.088928] musb_hdrc: 18/31 max ep, 14592/16384 memory
- [ 0.088958] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
- [ 0.089324] NET: Registered protocol family 2
- [ 0.089447] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.089813] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.092468] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.093261] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.093261] TCP reno registered
- [ 0.093414] NET: Registered protocol family 1
- [ 0.162414] dspbridge_init: 600000 bytes @ bea00000
- [ 0.162506] hs_init: omap_hs driver
- [ 0.163452] omap-iommu omap-iommu.0: isp registered
- [ 0.163543] sec_init: omap_sec driver
- [ 0.163574] sec_init: kci parameter is not set
- [ 0.163879] audit: initializing netlink socket (disabled)
- [ 0.163940] type=2000 audit(0.156:1): initialized
- [ 0.173583] fuse init (API version 7.13)
- [ 0.175018] Btrfs loaded
- [ 0.175048] msgmni has been set to 1948
- [ 0.177825] io scheduler noop registered
- [ 0.177856] io scheduler anticipatory registered
- [ 0.177856] io scheduler deadline registered
- [ 0.178161] io scheduler cfq registered (default)
- [ 0.236846] OMAP DSS rev 2.0
- [ 0.236938] OMAP DISPC rev 3.0
- [ 0.236968] OMAP VENC rev 2
- [ 0.237152] OMAP DSI rev 1.0
- [ 0.259490] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
- [ 0.260162] serial8250.2: ttyS0 at MMIO 0x49020000 (irq = 74) is a TI16750
- [ 0.971862] console [ttyS0] enabled
- [ 0.980712] brd: module loaded
- [ 0.983367] loop: module loaded
- [ 0.984924] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 0.988128] OneNAND driver initializing
- [ 0.991973] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
- [ 1.002624] OneNAND Manufacturer: Samsung (0xec)
- [ 1.002655] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
- [ 1.007324] OneNAND version = 0x0232
- [ 1.010925] Chip support all block unlock
- [ 1.010925] Chip has 4KiB pagesize
- [ 1.010986] 6 cmdlinepart partitions found on MTD device omap2-onenand
- [ 1.017456] Creating 6 MTD partitions on "omap2-onenand":
- [ 1.022888] 0x000000000000-0x000000100000 : "bootloader"
- [ 1.028930] 0x000000100000-0x0000003c0000 : "config"
- [ 1.033752] 0x0000003c0000-0x0000013c0000 : "kernel"
- [ 1.038665] 0x0000013c0000-0x0000015c0000 : "log"
- [ 1.043395] 0x0000015c0000-0x00001e000000 : "var"
- [ 1.048095] 0x00001e000000-0x000020000000 : "moslo"
- [ 1.053955] tun: Universal TUN/TAP device driver, 1.6
- [ 1.057525] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.081085] input: ECI Accessory as /devices/virtual/input/input0
- [ 1.082214] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
- [ 1.089355] i2c /dev entries driver
- [ 1.092834] Linux media interface: v0.10
- [ 1.096313] Linux video capture interface: v2.00
- [ 1.102142] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 1.107696] HACK: TWL5031 WDT can't be disabled. Automatic WDT refresh started
- [ 1.114166] cpuidle: using governor ladder
- [ 1.118164] cpuidle: using governor menu
- [ 1.122924] omap_sham_mod_init: loading omap-sham driver
- [ 1.127563] omap-sham omap-sham: hw accel on OMAP rev 0.9
- [ 1.134307] Advanced Linux Sound Architecture Driver Version 1.0.21.
- [ 1.165954] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input1
- [ 1.169616] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
- [ 1.179107] No device for DAI omap-mcbsp-dai-0
- [ 1.180969] No device for DAI omap-mcbsp-dai-1
- [ 1.185455] No device for DAI omap-mcbsp-dai-2
- [ 1.189910] No device for DAI omap-mcbsp-dai-3
- [ 1.194335] No device for DAI omap-mcbsp-dai-4
- [ 1.198883] mmc0: hardware reset done
- [ 1.247589] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
- [ 1.250244] input: dfl61-twl4030 Jack as /devices/platform/soc-audio.0/sound/card0/input2
- [ 1.256896] DFL61 TWL SoC init done (config 4)
- [ 1.260772] asoc: tlv320dac33 <-> omap-mcbsp-dai-1 mapping ok
- [ 1.266723] ALSA device list:
- [ 1.268859] #0: dfl61-twl4030 (twl4030)
- [ 1.272827] #1: dfl61-dac33 (tlv320dac33)
- [ 1.277557] misc iphb: Module registered in 2.6.32.54-ubiboot-02, built May 31 2013 08:40:57
- [ 1.285552] TCP cubic registered
- [ 1.288696] NET: Registered protocol family 17
- [ 1.293212] NET: Registered protocol family 15
- [ 1.297637] Bluetooth: L2CAP ver 2.14
- [ 1.301269] Bluetooth: L2CAP socket layer initialized
- [ 1.306335] Bluetooth: SCO (Voice Link) ver 0.6
- [ 1.310882] Bluetooth: SCO socket layer initialized
- [ 1.315948] Bluetooth: RFCOMM TTY layer initialized
- [ 1.320648] Bluetooth: RFCOMM socket layer initialized
- [ 1.325775] Bluetooth: RFCOMM ver 1.11
- [ 1.329528] Power Management for TI OMAP3.
- [ 1.334991] SmartReflex device[1] initialized
- [ 1.338012] SmartReflex device[2] initialized
- [ 1.343200] input: gpio-keys as /devices/platform/gpio-keys/input/input3
- [ 1.353759] Disabling unused clock "gpt2_ick"
- [ 1.353790] Disabling unused clock "gpt3_ick"
- [ 1.353790] Disabling unused clock "gpt4_ick"
- [ 1.353820] Disabling unused clock "gpt5_ick"
- [ 1.353912] Disabling unused clock "gpt6_ick"
- [ 1.353912] Disabling unused clock "gpt7_ick"
- [ 1.353942] Disabling unused clock "gpt8_ick"
- [ 1.353942] Disabling unused clock "gpt9_ick"
- [ 1.353973] Disabling unused clock "gpio2_dbck"
- [ 1.353973] Disabling unused clock "gpio3_dbck"
- [ 1.354003] Disabling unused clock "gpio4_dbck"
- [ 1.354003] Disabling unused clock "gpio5_dbck"
- [ 1.354003] Disabling unused clock "gpio6_dbck"
- [ 1.354034] Disabling unused clock "gpt9_fck"
- [ 1.354034] Disabling unused clock "gpt8_fck"
- [ 1.354064] Disabling unused clock "gpt7_fck"
- [ 1.354064] Disabling unused clock "gpt6_fck"
- [ 1.354095] Disabling unused clock "gpt5_fck"
- [ 1.354095] Disabling unused clock "gpt4_fck"
- [ 1.354125] Disabling unused clock "gpt3_fck"
- [ 1.354125] Disabling unused clock "gpt2_fck"
- [ 1.354156] Disabling unused clock "gpio1_dbck"
- [ 1.354156] Disabling unused clock "ssi_ick"
- [ 1.354187] Disabling unused clock "gpt10_ick"
- [ 1.354187] Disabling unused clock "gpt11_ick"
- [ 1.354217] Disabling unused clock "uart1_ick"
- [ 1.354217] Disabling unused clock "uart2_ick"
- [ 1.354248] Disabling unused clock "usbtll_ick"
- [ 1.354278] Disabling unused clock "ssi_ssr_fck"
- [ 1.354278] Disabling unused clock "uart1_fck"
- [ 1.354309] Disabling unused clock "uart2_fck"
- [ 1.354309] Disabling unused clock "usbtll_fck"
- [ 1.354339] Disabling unused clock "ts_fck"
- [ 1.354370] Disabling unused clock "cpefuse_fck"
- [ 1.354370] Disabling unused clock "gpt11_fck"
- [ 1.354400] Disabling unused clock "gpt10_fck"
- [ 1.354400] Disabling unused clock "dpll4_m6x2_ck"
- [ 1.354431] Disabling unused clock "dpll4_m5x2_ck"
- [ 1.354431] Disabling unused clock "dpll3_m3x2_ck"
- [ 1.354766] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 1.416748] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
- [ 1.418579] regulator_init_complete: incomplete constraints, leaving rm696_vmmc1 on
- [ 1.427276] asoc: WL1273 BT/FM codec <-> omap-mcbsp-dai-2 mapping ok
- [ 1.434753] Freeing init memory: 10568K
- [ 1.435638] Warning: unable to open an initial console.
- [ 1.632690] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input4
- [ 1.651947] mmc0: new high speed MMC card at address 0001
- [ 1.664215] mmcblk0: mmc0:0001 HYNIX 14.8 GiB
- [ 1.664642] mmcblk0:mmc_queue_do_make_request process kmmcd (pid 15), read to sector 0, sectors 8
- [ 1.682037] p1 p2 p3 p4
- [ 1.719512] g_nokia: Unknown symbol phonet_header_ops
- [ 1.742767] g_nokia: Unknown symbol phonet_header_ops
- [ 1.783233] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 1.805419] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 1.806579] mmc1: new SDIO card at address 0001
- [ 1.883941] UBI: attaching mtd4 to ubi0
- [ 1.884063] UBI DBG (pid 114): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 1.884063] UBI DBG (pid 114): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 1.884063] UBI DBG (pid 114): io_init: min_io_size 4096
- [ 1.884094] UBI DBG (pid 114): io_init: max_write_size 4096
- [ 1.884094] UBI DBG (pid 114): io_init: hdrs_min_io_size 1024
- [ 1.884094] UBI DBG (pid 114): io_init: ec_hdr_alsize 1024
- [ 1.884124] UBI DBG (pid 114): io_init: vid_hdr_alsize 1024
- [ 1.884124] UBI DBG (pid 114): io_init: vid_hdr_offset 1024
- [ 1.884124] UBI DBG (pid 114): io_init: vid_hdr_aloffset 1024
- [ 1.884124] UBI DBG (pid 114): io_init: vid_hdr_shift 0
- [ 1.884155] UBI DBG (pid 114): io_init: leb_start 4096
- [ 1.884155] UBI DBG (pid 114): io_init: max_erroneous 183
- [ 1.884155] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 1.899353] UBI: logical eraseblock size: 258048 bytes
- [ 1.899475] UBI: smallest flash I/O unit: 4096
- [ 1.905456] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 1.911071] UBI: sub-page size: 1024
- [ 1.911163] UBI: VID header offset: 1024 (aligned 1024)
- [ 1.916229] UBI: data offset: 4096
- [ 1.993041] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0xd8 addr8 0x0
- [ 1.993072] OneNAND eraseblock 216 is an initial bad block
- [ 2.003570] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 2.177001] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x461 addr8 0x0
- [ 2.177032] OneNAND eraseblock 1121 is an initial bad block
- [ 2.325927] UBI DBG (pid 114): ubi_scan: scanning is finished
- [ 2.326049] UBI: max. sequence number: 0
- [ 2.326141] UBI error: ubi_read_volume_table: the layout volume was not found
- [ 2.332366] UBI error: ubi_attach_mtd_dev: failed to attach by scanning, error -22
- [ 2.343902] UBI: attaching mtd5 to ubi0
- [ 2.343994] UBI DBG (pid 115): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 2.344024] UBI DBG (pid 115): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 2.344024] UBI DBG (pid 115): io_init: min_io_size 4096
- [ 2.344024] UBI DBG (pid 115): io_init: max_write_size 4096
- [ 2.344024] UBI DBG (pid 115): io_init: hdrs_min_io_size 1024
- [ 2.344055] UBI DBG (pid 115): io_init: ec_hdr_alsize 1024
- [ 2.344055] UBI DBG (pid 115): io_init: vid_hdr_alsize 1024
- [ 2.344055] UBI DBG (pid 115): io_init: vid_hdr_offset 1024
- [ 2.344085] UBI DBG (pid 115): io_init: vid_hdr_aloffset 1024
- [ 2.344085] UBI DBG (pid 115): io_init: vid_hdr_shift 0
- [ 2.344085] UBI DBG (pid 115): io_init: leb_start 4096
- [ 2.344085] UBI DBG (pid 115): io_init: max_erroneous 16
- [ 2.344116] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 2.349822] UBI: logical eraseblock size: 258048 bytes
- [ 2.355194] UBI: smallest flash I/O unit: 4096
- [ 2.359893] UBI: sub-page size: 1024
- [ 2.364624] UBI: VID header offset: 1024 (aligned 1024)
- [ 2.370635] UBI: data offset: 4096
- [ 2.402008] UBI DBG (pid 115): ubi_scan: scanning is finished
- [ 2.402038] UBI: max. sequence number: 2
- [ 2.407958] UBI: attached mtd5 to ubi0
- [ 2.408050] UBI: MTD device name: "moslo"
- [ 2.411193] UBI: MTD device size: 32 MiB
- [ 2.416015] UBI: number of good PEBs: 128
- [ 2.420684] UBI: number of bad PEBs: 0
- [ 2.425109] UBI: number of corrupted PEBs: 0
- [ 2.429534] UBI: max. allowed volumes: 128
- [ 2.434173] UBI: wear-leveling threshold: 4096
- [ 2.438873] UBI: number of internal volumes: 1
- [ 2.443328] UBI: number of user volumes: 0
- [ 2.447784] UBI: available PEBs: 122
- [ 2.452392] UBI: total number of reserved PEBs: 6
- [ 2.457122] UBI: number of PEBs reserved for bad PEB handling: 2
- [ 2.463104] UBI: max/mean erase counter: 2/1
- [ 2.467407] UBI: image sequence number: -1223690438
- [ 2.472381] UBI: background thread "ubi_bgt0d" started, PID 117
- [ 2.493988] UBI DBG (pid 121): ubi_detach_mtd_dev: detaching mtd5 from ubi0
- [ 2.494903] UBI: mtd5 is detached from ubi0
- [ 4.095092] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
- [ 4.106140] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
- [ 4.147460] EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended
- [ 4.176483] EXT4-fs (mmcblk0p4): recovery complete
- [ 4.176635] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode
- Sun Jun 2 18:55:13 UTC 2013
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32.54-ubiboot-02 (juice@osiris) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 PREEMPT Fri May 31 11:04:03 EEST 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: Nokia RM-696 board
- [ 0.000000] Overriding kernel command line
- [ 0.000000] Original command line: init=/sbin/preinit root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=pwr_key bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-size=73 dbi-uid=0137454C530016004C24 imei=357923041317688 g_nokia.iSerialNumber=357923041317688 serialnumber=CCM976757 omap_sec.kci=958 gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1507
- [ 0.000000] Reserving 14680064 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3630 ES1.2-hs (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- [ 0.000000] On node 0 totalpages: 257024
- [ 0.000000] free_area_init_node: node 0, pgdat b0fc7030, node_mem_map b1005000
- [ 0.000000] Normal zone: 2048 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 254976 pages, LIFO batch:31
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254976
- [ 0.000000] Kernel command line: init=/init root=0xB302 rootfstype=ext4 rw console=ttyS0,115200n8 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 5242880 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 1002MB 2MB = 1004MB total
- [ 0.000000] Memory: 997248KB available (5180K code, 473K data, 10568K init, 0K highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:402
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
- [ 0.000000] Reprogramming SDRC clock to 390400000 Hz
- [ 0.000000] GPMC revision 5.0
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP GPIO hardware version 2.5
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000122] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- [ 0.039184] Security Framework initialized
- [ 0.039215] Mount-cache hash table entries: 512
- [ 0.039581] Initializing cgroup subsys ns
- [ 0.039581] Initializing cgroup subsys cpuacct
- [ 0.039611] Initializing cgroup subsys memory
- [ 0.039642] Initializing cgroup subsys devices
- [ 0.039642] Initializing cgroup subsys freezer
- [ 0.039703] CPU: Testing write buffer coherency: ok
- [ 0.040191] devtmpfs: initialized
- [ 0.044555] regulator: core version 0.5
- [ 0.044738] NET: Registered protocol family 16
- [ 0.045501] RM-696 board, rev 1507
- [ 0.046264] MUX: setup AB1_3430_MMC3_CLK (0xfa0021d2): 0x0004 -> 0x011b
- [ 0.046264] MUX: setup AC3_3430_MMC3_CMD (0xfa0021d0): 0x011c -> 0x011b
- [ 0.046295] MUX: setup AE4_3430_MMC3_DAT0 (0xfa002164): 0x011c -> 0x011b
- [ 0.046295] MUX: setup AH3_3430_MMC3_DAT1 (0xfa002166): 0x011c -> 0x011b
- [ 0.046325] MUX: setup AF3_3430_MMC3_DAT2 (0xfa002168): 0x011c -> 0x011b
- [ 0.046325] MUX: setup AE3_3430_MMC3_DAT3 (0xfa00216a): 0x011c -> 0x011b
- [ 0.046569] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0118 -> 0x0000
- [ 0.046600] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0118 -> 0x0000
- [ 0.046600] SmartReflex class 1.5 driver: initialized
- [ 0.048553] OMAP DMA hardware revision 5.0
- [ 0.048645] Reserving DMA channels 0 and 1 for HS ROM code
- [ 0.051574] bio: create slab <bio-0> at 0
- [ 0.052032] regulator: VSDIO: 1800 mV normal standby
- [ 0.052154] regulator: vbat: 3700 mV
- [ 0.052276] regulator: VEMMC: 2900 mV normal standby
- [ 0.053497] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2900 kHz
- [ 0.068389] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 0.068420] twl4030: power (irq 373) chaining IRQs 376..383
- [ 0.068817] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 0.069610] regulator: VUSB1V5: 1500 mV normal standby
- [ 0.069793] regulator: VUSB1V8: 1800 mV normal standby
- [ 0.069946] regulator: VUSB3V1: 3100 mV normal standby
- [ 0.071807] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.072570] regulator: VPLL1: 1800 mV normal standby
- [ 0.073944] regulator: VIO: 1800 mV normal standby
- [ 0.074157] regulator: VMMC1: 1850 <--> 3150 mV normal standby
- [ 0.074432] regulator: VDAC: 1800 mV normal standby
- [ 0.074707] regulator: VAUX2: 1800 mV normal standby
- [ 0.075134] regulator: VINTANA1: 1500 mV normal standby
- [ 0.075592] regulator: VINTANA2: 2750 mV normal standby
- [ 0.076049] regulator: VINTDIG: 1500 mV normal standby
- [ 0.076293] regulator: VPLL2: 1800 mV normal standby
- [ 0.076568] regulator: VMMC2: 3000 mV normal standby
- [ 0.076843] regulator: VSIM: 1800 mV normal standby
- [ 0.077117] regulator: VAUX1: 2800 mV normal standby
- [ 0.077423] regulator: VAUX3: 2800 mV normal standby
- [ 0.077697] regulator: VAUX4: 2800 mV normal standby
- [ 0.077972] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- [ 0.086029] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
- [ 0.087280] Bluetooth: Core ver 2.15
- [ 0.087432] NET: Registered protocol family 31
- [ 0.087463] Bluetooth: HCI device and connection manager initialized
- [ 0.087463] Bluetooth: HCI socket layer initialized
- [ 0.087738] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.088043] Switching to clocksource 32k_counter
- [ 0.088745] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
- [ 0.088836] HS USB OTG: revision 0x40, sysconfig 0x2015, sysstatus 0x1, intrfsel 0x1, simenable 0x0
- [ 0.088897] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 0.088897] musb_hdrc: MHDRC RTL version 1.800
- [ 0.088928] musb_hdrc: 18/31 max ep, 14592/16384 memory
- [ 0.088958] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
- [ 0.089324] NET: Registered protocol family 2
- [ 0.089447] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.089813] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.092468] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.093261] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.093261] TCP reno registered
- [ 0.093414] NET: Registered protocol family 1
- [ 0.162445] dspbridge_init: 600000 bytes @ bea00000
- [ 0.162536] hs_init: omap_hs driver
- [ 0.163482] omap-iommu omap-iommu.0: isp registered
- [ 0.163574] sec_init: omap_sec driver
- [ 0.163574] sec_init: kci parameter is not set
- [ 0.163909] audit: initializing netlink socket (disabled)
- [ 0.163940] type=2000 audit(0.156:1): initialized
- [ 0.173614] fuse init (API version 7.13)
- [ 0.175048] Btrfs loaded
- [ 0.175079] msgmni has been set to 1948
- [ 0.177856] io scheduler noop registered
- [ 0.177886] io scheduler anticipatory registered
- [ 0.177886] io scheduler deadline registered
- [ 0.178192] io scheduler cfq registered (default)
- [ 0.236846] OMAP DSS rev 2.0
- [ 0.236938] OMAP DISPC rev 3.0
- [ 0.236968] OMAP VENC rev 2
- [ 0.237152] OMAP DSI rev 1.0
- [ 0.259490] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
- [ 0.260162] serial8250.2: ttyS0 at MMIO 0x49020000 (irq = 74) is a TI16750
- [ 0.971954] console [ttyS0] enabled
- [ 0.980804] brd: module loaded
- [ 0.983459] loop: module loaded
- [ 0.985046] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 0.988220] OneNAND driver initializing
- [ 0.992065] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
- [ 1.002716] OneNAND Manufacturer: Samsung (0xec)
- [ 1.002716] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
- [ 1.007415] OneNAND version = 0x0232
- [ 1.011016] Chip support all block unlock
- [ 1.011016] Chip has 4KiB pagesize
- [ 1.011077] 6 cmdlinepart partitions found on MTD device omap2-onenand
- [ 1.017517] Creating 6 MTD partitions on "omap2-onenand":
- [ 1.022979] 0x000000000000-0x000000100000 : "bootloader"
- [ 1.029022] 0x000000100000-0x0000003c0000 : "config"
- [ 1.033843] 0x0000003c0000-0x0000013c0000 : "kernel"
- [ 1.038757] 0x0000013c0000-0x0000015c0000 : "log"
- [ 1.043487] 0x0000015c0000-0x00001e000000 : "var"
- [ 1.048187] 0x00001e000000-0x000020000000 : "moslo"
- [ 1.054046] tun: Universal TUN/TAP device driver, 1.6
- [ 1.057586] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.081085] input: ECI Accessory as /devices/virtual/input/input0
- [ 1.082214] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
- [ 1.089355] i2c /dev entries driver
- [ 1.092834] Linux media interface: v0.10
- [ 1.096313] Linux video capture interface: v2.00
- [ 1.102142] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 1.107696] HACK: TWL5031 WDT can't be disabled. Automatic WDT refresh started
- [ 1.114166] cpuidle: using governor ladder
- [ 1.118164] cpuidle: using governor menu
- [ 1.122924] omap_sham_mod_init: loading omap-sham driver
- [ 1.127532] omap-sham omap-sham: hw accel on OMAP rev 0.9
- [ 1.134307] Advanced Linux Sound Architecture Driver Version 1.0.21.
- [ 1.165985] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input1
- [ 1.169647] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
- [ 1.179107] No device for DAI omap-mcbsp-dai-0
- [ 1.180999] No device for DAI omap-mcbsp-dai-1
- [ 1.185485] No device for DAI omap-mcbsp-dai-2
- [ 1.189910] No device for DAI omap-mcbsp-dai-3
- [ 1.194335] No device for DAI omap-mcbsp-dai-4
- [ 1.198913] mmc0: hardware reset done
- [ 1.247589] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
- [ 1.250244] input: dfl61-twl4030 Jack as /devices/platform/soc-audio.0/sound/card0/input2
- [ 1.256896] DFL61 TWL SoC init done (config 4)
- [ 1.260772] asoc: tlv320dac33 <-> omap-mcbsp-dai-1 mapping ok
- [ 1.266723] ALSA device list:
- [ 1.268859] #0: dfl61-twl4030 (twl4030)
- [ 1.272827] #1: dfl61-dac33 (tlv320dac33)
- [ 1.277557] misc iphb: Module registered in 2.6.32.54-ubiboot-02, built May 31 2013 08:40:57
- [ 1.285552] TCP cubic registered
- [ 1.288696] NET: Registered protocol family 17
- [ 1.293212] NET: Registered protocol family 15
- [ 1.297637] Bluetooth: L2CAP ver 2.14
- [ 1.301269] Bluetooth: L2CAP socket layer initialized
- [ 1.306335] Bluetooth: SCO (Voice Link) ver 0.6
- [ 1.310882] Bluetooth: SCO socket layer initialized
- [ 1.315948] Bluetooth: RFCOMM TTY layer initialized
- [ 1.320648] Bluetooth: RFCOMM socket layer initialized
- [ 1.325775] Bluetooth: RFCOMM ver 1.11
- [ 1.329528] Power Management for TI OMAP3.
- [ 1.334991] SmartReflex device[1] initialized
- [ 1.338012] SmartReflex device[2] initialized
- [ 1.343200] input: gpio-keys as /devices/platform/gpio-keys/input/input3
- [ 1.353759] Disabling unused clock "gpt2_ick"
- [ 1.353790] Disabling unused clock "gpt3_ick"
- [ 1.353881] Disabling unused clock "gpt4_ick"
- [ 1.353881] Disabling unused clock "gpt5_ick"
- [ 1.353912] Disabling unused clock "gpt6_ick"
- [ 1.353912] Disabling unused clock "gpt7_ick"
- [ 1.353942] Disabling unused clock "gpt8_ick"
- [ 1.353942] Disabling unused clock "gpt9_ick"
- [ 1.353973] Disabling unused clock "gpio2_dbck"
- [ 1.353973] Disabling unused clock "gpio3_dbck"
- [ 1.354003] Disabling unused clock "gpio4_dbck"
- [ 1.354003] Disabling unused clock "gpio5_dbck"
- [ 1.354003] Disabling unused clock "gpio6_dbck"
- [ 1.354034] Disabling unused clock "gpt9_fck"
- [ 1.354034] Disabling unused clock "gpt8_fck"
- [ 1.354064] Disabling unused clock "gpt7_fck"
- [ 1.354064] Disabling unused clock "gpt6_fck"
- [ 1.354095] Disabling unused clock "gpt5_fck"
- [ 1.354095] Disabling unused clock "gpt4_fck"
- [ 1.354125] Disabling unused clock "gpt3_fck"
- [ 1.354125] Disabling unused clock "gpt2_fck"
- [ 1.354156] Disabling unused clock "gpio1_dbck"
- [ 1.354156] Disabling unused clock "ssi_ick"
- [ 1.354187] Disabling unused clock "gpt10_ick"
- [ 1.354187] Disabling unused clock "gpt11_ick"
- [ 1.354217] Disabling unused clock "uart1_ick"
- [ 1.354217] Disabling unused clock "uart2_ick"
- [ 1.354248] Disabling unused clock "usbtll_ick"
- [ 1.354278] Disabling unused clock "ssi_ssr_fck"
- [ 1.354278] Disabling unused clock "uart1_fck"
- [ 1.354278] Disabling unused clock "uart2_fck"
- [ 1.354309] Disabling unused clock "usbtll_fck"
- [ 1.354339] Disabling unused clock "ts_fck"
- [ 1.354370] Disabling unused clock "cpefuse_fck"
- [ 1.354370] Disabling unused clock "gpt11_fck"
- [ 1.354370] Disabling unused clock "gpt10_fck"
- [ 1.354400] Disabling unused clock "dpll4_m6x2_ck"
- [ 1.354431] Disabling unused clock "dpll4_m5x2_ck"
- [ 1.354431] Disabling unused clock "dpll3_m3x2_ck"
- [ 1.354461] Disabling unused clock "sys_clkout1"
- [ 1.354766] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 1.416748] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
- [ 1.418579] regulator_init_complete: incomplete constraints, leaving rm696_vmmc1 on
- [ 1.427276] asoc: WL1273 BT/FM codec <-> omap-mcbsp-dai-2 mapping ok
- [ 1.434753] Freeing init memory: 10568K
- [ 1.435638] Warning: unable to open an initial console.
- [ 1.626617] mmc0: new high speed MMC card at address 0001
- [ 1.634155] mmcblk0: mmc0:0001 HYNIX 14.8 GiB
- [ 1.634582] mmcblk0:mmc_queue_do_make_request process kmmcd (pid 15), read to sector 0, sectors 8
- [ 1.643920] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input4
- [ 1.658050] p1 p2 p3 p4
- [ 1.723083] g_nokia: Unknown symbol phonet_header_ops
- [ 1.749267] g_nokia: Unknown symbol phonet_header_ops
- [ 1.752014] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 1.802368] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 1.803619] mmc1: new SDIO card at address 0001
- [ 1.889984] UBI: attaching mtd4 to ubi0
- [ 1.890075] UBI DBG (pid 114): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 1.890106] UBI DBG (pid 114): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 1.890106] UBI DBG (pid 114): io_init: min_io_size 4096
- [ 1.890106] UBI DBG (pid 114): io_init: max_write_size 4096
- [ 1.890136] UBI DBG (pid 114): io_init: hdrs_min_io_size 1024
- [ 1.890136] UBI DBG (pid 114): io_init: ec_hdr_alsize 1024
- [ 1.890136] UBI DBG (pid 114): io_init: vid_hdr_alsize 1024
- [ 1.890136] UBI DBG (pid 114): io_init: vid_hdr_offset 1024
- [ 1.890167] UBI DBG (pid 114): io_init: vid_hdr_aloffset 1024
- [ 1.890167] UBI DBG (pid 114): io_init: vid_hdr_shift 0
- [ 1.890167] UBI DBG (pid 114): io_init: leb_start 4096
- [ 1.890167] UBI DBG (pid 114): io_init: max_erroneous 183
- [ 1.890197] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 1.905334] UBI: logical eraseblock size: 258048 bytes
- [ 1.905456] UBI: smallest flash I/O unit: 4096
- [ 1.911926] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 1.916931] UBI: sub-page size: 1024
- [ 1.917053] UBI: VID header offset: 1024 (aligned 1024)
- [ 1.922119] UBI: data offset: 4096
- [ 1.947387] onenand_wait: correctable ECC error = 0x5555, addr1 0x6d, addr8 0x0
- [ 1.947418] UBI DBG (pid 114): ubi_io_read: fixable bit-flip detected at PEB 22
- [ 1.959197] onenand_wait: correctable ECC error = 0x5555, addr1 0x7f, addr8 0x0
- [ 1.959197] UBI DBG (pid 114): ubi_io_read: fixable bit-flip detected at PEB 40
- [ 2.005004] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0xd8 addr8 0x0
- [ 2.005004] OneNAND eraseblock 216 is an initial bad block
- [ 2.010986] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 2.185455] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x461 addr8 0x0
- [ 2.185455] OneNAND eraseblock 1121 is an initial bad block
- [ 2.334411] UBI DBG (pid 114): ubi_scan: scanning is finished
- [ 2.334503] UBI: max. sequence number: 0
- [ 2.334594] UBI error: ubi_read_volume_table: the layout volume was not found
- [ 2.340820] UBI error: ubi_attach_mtd_dev: failed to attach by scanning, error -22
- [ 2.352355] UBI: attaching mtd5 to ubi0
- [ 2.352447] UBI DBG (pid 115): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 2.352478] UBI DBG (pid 115): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 2.352478] UBI DBG (pid 115): io_init: min_io_size 4096
- [ 2.352478] UBI DBG (pid 115): io_init: max_write_size 4096
- [ 2.352508] UBI DBG (pid 115): io_init: hdrs_min_io_size 1024
- [ 2.352508] UBI DBG (pid 115): io_init: ec_hdr_alsize 1024
- [ 2.352508] UBI DBG (pid 115): io_init: vid_hdr_alsize 1024
- [ 2.352508] UBI DBG (pid 115): io_init: vid_hdr_offset 1024
- [ 2.352539] UBI DBG (pid 115): io_init: vid_hdr_aloffset 1024
- [ 2.352539] UBI DBG (pid 115): io_init: vid_hdr_shift 0
- [ 2.352539] UBI DBG (pid 115): io_init: leb_start 4096
- [ 2.352569] UBI DBG (pid 115): io_init: max_erroneous 16
- [ 2.352569] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 2.358306] UBI: logical eraseblock size: 258048 bytes
- [ 2.363647] UBI: smallest flash I/O unit: 4096
- [ 2.368347] UBI: sub-page size: 1024
- [ 2.373077] UBI: VID header offset: 1024 (aligned 1024)
- [ 2.379089] UBI: data offset: 4096
- [ 2.410430] UBI DBG (pid 115): ubi_scan: scanning is finished
- [ 2.410461] UBI: max. sequence number: 2
- [ 2.416412] UBI: attached mtd5 to ubi0
- [ 2.416503] UBI: MTD device name: "moslo"
- [ 2.419586] UBI: MTD device size: 32 MiB
- [ 2.424560] UBI: number of good PEBs: 128
- [ 2.429077] UBI: number of bad PEBs: 0
- [ 2.433532] UBI: number of corrupted PEBs: 0
- [ 2.437957] UBI: max. allowed volumes: 128
- [ 2.442596] UBI: wear-leveling threshold: 4096
- [ 2.447296] UBI: number of internal volumes: 1
- [ 2.451751] UBI: number of user volumes: 0
- [ 2.456237] UBI: available PEBs: 122
- [ 2.460815] UBI: total number of reserved PEBs: 6
- [ 2.465545] UBI: number of PEBs reserved for bad PEB handling: 2
- [ 2.471557] UBI: max/mean erase counter: 2/1
- [ 2.475830] UBI: image sequence number: -1223690438
- [ 2.480804] UBI: background thread "ubi_bgt0d" started, PID 117
- [ 2.502655] UBI DBG (pid 121): ubi_detach_mtd_dev: detaching mtd5 from ubi0
- [ 2.503356] UBI: mtd5 is detached from ubi0
- [ 4.111022] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
- [ 4.122009] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
- [ 4.163940] EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended
- [ 4.191253] EXT4-fs (mmcblk0p4): recovery complete
- [ 4.191406] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode
- Sun Jun 2 18:57:24 UTC 2013
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32.54-ubiboot-02 (juice@osiris) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 PREEMPT Fri May 31 11:04:03 EEST 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: Nokia RM-696 board
- [ 0.000000] Overriding kernel command line
- [ 0.000000] Original command line: init=/sbin/preinit root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=pwr_key bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-size=73 dbi-uid=0137454C530016004C24 imei=357923041317688 g_nokia.iSerialNumber=357923041317688 serialnumber=CCM976757 omap_sec.kci=958 gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1507
- [ 0.000000] Reserving 14680064 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3630 ES1.2-hs (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- [ 0.000000] On node 0 totalpages: 257024
- [ 0.000000] free_area_init_node: node 0, pgdat b0fc7030, node_mem_map b1005000
- [ 0.000000] Normal zone: 2048 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 254976 pages, LIFO batch:31
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254976
- [ 0.000000] Kernel command line: init=/init root=0xB302 rootfstype=ext4 rw console=ttyS0,115200n8 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 5242880 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 1002MB 2MB = 1004MB total
- [ 0.000000] Memory: 997248KB available (5180K code, 473K data, 10568K init, 0K highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:402
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
- [ 0.000000] Reprogramming SDRC clock to 390400000 Hz
- [ 0.000000] GPMC revision 5.0
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP GPIO hardware version 2.5
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000152] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- [ 0.039215] Security Framework initialized
- [ 0.039245] Mount-cache hash table entries: 512
- [ 0.039581] Initializing cgroup subsys ns
- [ 0.039611] Initializing cgroup subsys cpuacct
- [ 0.039611] Initializing cgroup subsys memory
- [ 0.039642] Initializing cgroup subsys devices
- [ 0.039672] Initializing cgroup subsys freezer
- [ 0.039703] CPU: Testing write buffer coherency: ok
- [ 0.040222] devtmpfs: initialized
- [ 0.044586] regulator: core version 0.5
- [ 0.044769] NET: Registered protocol family 16
- [ 0.045532] RM-696 board, rev 1507
- [ 0.046295] MUX: setup AB1_3430_MMC3_CLK (0xfa0021d2): 0x0004 -> 0x011b
- [ 0.046295] MUX: setup AC3_3430_MMC3_CMD (0xfa0021d0): 0x011c -> 0x011b
- [ 0.046325] MUX: setup AE4_3430_MMC3_DAT0 (0xfa002164): 0x011c -> 0x011b
- [ 0.046325] MUX: setup AH3_3430_MMC3_DAT1 (0xfa002166): 0x011c -> 0x011b
- [ 0.046356] MUX: setup AF3_3430_MMC3_DAT2 (0xfa002168): 0x011c -> 0x011b
- [ 0.046356] MUX: setup AE3_3430_MMC3_DAT3 (0xfa00216a): 0x011c -> 0x011b
- [ 0.046600] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0118 -> 0x0000
- [ 0.046630] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0118 -> 0x0000
- [ 0.046630] SmartReflex class 1.5 driver: initialized
- [ 0.048583] OMAP DMA hardware revision 5.0
- [ 0.048675] Reserving DMA channels 0 and 1 for HS ROM code
- [ 0.051605] bio: create slab <bio-0> at 0
- [ 0.052062] regulator: VSDIO: 1800 mV normal standby
- [ 0.052185] regulator: vbat: 3700 mV
- [ 0.052307] regulator: VEMMC: 2900 mV normal standby
- [ 0.053588] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2900 kHz
- [ 0.068481] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 0.068511] twl4030: power (irq 373) chaining IRQs 376..383
- [ 0.068908] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 0.069702] regulator: VUSB1V5: 1500 mV normal standby
- [ 0.069885] regulator: VUSB1V8: 1800 mV normal standby
- [ 0.070068] regulator: VUSB3V1: 3100 mV normal standby
- [ 0.071899] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.072631] regulator: VPLL1: 1800 mV normal standby
- [ 0.074005] regulator: VIO: 1800 mV normal standby
- [ 0.074218] regulator: VMMC1: 1850 <--> 3150 mV normal standby
- [ 0.074493] regulator: VDAC: 1800 mV normal standby
- [ 0.074768] regulator: VAUX2: 1800 mV normal standby
- [ 0.075195] regulator: VINTANA1: 1500 mV normal standby
- [ 0.075683] regulator: VINTANA2: 2750 mV normal standby
- [ 0.076110] regulator: VINTDIG: 1500 mV normal standby
- [ 0.076385] regulator: VPLL2: 1800 mV normal standby
- [ 0.076660] regulator: VMMC2: 3000 mV normal standby
- [ 0.076934] regulator: VSIM: 1800 mV normal standby
- [ 0.077209] regulator: VAUX1: 2800 mV normal standby
- [ 0.077484] regulator: VAUX3: 2800 mV normal standby
- [ 0.077789] regulator: VAUX4: 2800 mV normal standby
- [ 0.078063] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- [ 0.086059] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
- [ 0.087310] Bluetooth: Core ver 2.15
- [ 0.087463] NET: Registered protocol family 31
- [ 0.087463] Bluetooth: HCI device and connection manager initialized
- [ 0.087463] Bluetooth: HCI socket layer initialized
- [ 0.087738] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.088073] Switching to clocksource 32k_counter
- [ 0.088745] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
- [ 0.088836] HS USB OTG: revision 0x40, sysconfig 0x2015, sysstatus 0x1, intrfsel 0x1, simenable 0x0
- [ 0.088897] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 0.088897] musb_hdrc: MHDRC RTL version 1.800
- [ 0.088928] musb_hdrc: 18/31 max ep, 14592/16384 memory
- [ 0.088958] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
- [ 0.089355] NET: Registered protocol family 2
- [ 0.089477] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.089813] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.092498] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.093292] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.093292] TCP reno registered
- [ 0.093414] NET: Registered protocol family 1
- [ 0.162536] dspbridge_init: 600000 bytes @ bea00000
- [ 0.162628] hs_init: omap_hs driver
- [ 0.163574] omap-iommu omap-iommu.0: isp registered
- [ 0.163665] sec_init: omap_sec driver
- [ 0.163665] sec_init: kci parameter is not set
- [ 0.164001] audit: initializing netlink socket (disabled)
- [ 0.164031] type=2000 audit(0.156:1): initialized
- [ 0.173614] fuse init (API version 7.13)
- [ 0.175048] Btrfs loaded
- [ 0.175079] msgmni has been set to 1948
- [ 0.177856] io scheduler noop registered
- [ 0.177886] io scheduler anticipatory registered
- [ 0.177886] io scheduler deadline registered
- [ 0.178192] io scheduler cfq registered (default)
- [ 0.236846] OMAP DSS rev 2.0
- [ 0.236938] OMAP DISPC rev 3.0
- [ 0.236968] OMAP VENC rev 2
- [ 0.237152] OMAP DSI rev 1.0
- [ 0.259490] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
- [ 0.260131] serial8250.2: ttyS0 at MMIO 0x49020000 (irq = 74) is a TI16750
- [ 0.971954] console [ttyS0] enabled
- [ 0.980804] brd: module loaded
- [ 0.983428] loop: module loaded
- [ 0.985046] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 0.988220] OneNAND driver initializing
- [ 0.992065] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
- [ 1.002716] OneNAND Manufacturer: Samsung (0xec)
- [ 1.002716] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
- [ 1.007415] OneNAND version = 0x0232
- [ 1.011016] Chip support all block unlock
- [ 1.011016] Chip has 4KiB pagesize
- [ 1.011077] 6 cmdlinepart partitions found on MTD device omap2-onenand
- [ 1.017517] Creating 6 MTD partitions on "omap2-onenand":
- [ 1.022979] 0x000000000000-0x000000100000 : "bootloader"
- [ 1.029022] 0x000000100000-0x0000003c0000 : "config"
- [ 1.033843] 0x0000003c0000-0x0000013c0000 : "kernel"
- [ 1.038726] 0x0000013c0000-0x0000015c0000 : "log"
- [ 1.043487] 0x0000015c0000-0x00001e000000 : "var"
- [ 1.048187] 0x00001e000000-0x000020000000 : "moslo"
- [ 1.054046] tun: Universal TUN/TAP device driver, 1.6
- [ 1.057586] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.081085] input: ECI Accessory as /devices/virtual/input/input0
- [ 1.082214] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
- [ 1.089355] i2c /dev entries driver
- [ 1.092834] Linux media interface: v0.10
- [ 1.096313] Linux video capture interface: v2.00
- [ 1.102142] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 1.107666] HACK: TWL5031 WDT can't be disabled. Automatic WDT refresh started
- [ 1.114166] cpuidle: using governor ladder
- [ 1.118164] cpuidle: using governor menu
- [ 1.122924] omap_sham_mod_init: loading omap-sham driver
- [ 1.127532] omap-sham omap-sham: hw accel on OMAP rev 0.9
- [ 1.134307] Advanced Linux Sound Architecture Driver Version 1.0.21.
- [ 1.165985] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input1
- [ 1.169647] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
- [ 1.179138] No device for DAI omap-mcbsp-dai-0
- [ 1.181030] No device for DAI omap-mcbsp-dai-1
- [ 1.185516] No device for DAI omap-mcbsp-dai-2
- [ 1.189941] No device for DAI omap-mcbsp-dai-3
- [ 1.194366] No device for DAI omap-mcbsp-dai-4
- [ 1.198913] mmc0: hardware reset done
- [ 1.256896] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
- [ 1.259552] input: dfl61-twl4030 Jack as /devices/platform/soc-audio.0/sound/card0/input2
- [ 1.266204] DFL61 TWL SoC init done (config 4)
- [ 1.270111] asoc: tlv320dac33 <-> omap-mcbsp-dai-1 mapping ok
- [ 1.276092] ALSA device list:
- [ 1.278137] #0: dfl61-twl4030 (twl4030)
- [ 1.282135] #1: dfl61-dac33 (tlv320dac33)
- [ 1.286865] misc iphb: Module registered in 2.6.32.54-ubiboot-02, built May 31 2013 08:40:57
- [ 1.294860] TCP cubic registered
- [ 1.298004] NET: Registered protocol family 17
- [ 1.302520] NET: Registered protocol family 15
- [ 1.306945] Bluetooth: L2CAP ver 2.14
- [ 1.310577] Bluetooth: L2CAP socket layer initialized
- [ 1.315643] Bluetooth: SCO (Voice Link) ver 0.6
- [ 1.320159] Bluetooth: SCO socket layer initialized
- [ 1.325256] Bluetooth: RFCOMM TTY layer initialized
- [ 1.329956] Bluetooth: RFCOMM socket layer initialized
- [ 1.335083] Bluetooth: RFCOMM ver 1.11
- [ 1.338867] Power Management for TI OMAP3.
- [ 1.344268] SmartReflex device[1] initialized
- [ 1.347381] SmartReflex device[2] initialized
- [ 1.352447] input: gpio-keys as /devices/platform/gpio-keys/input/input3
- [ 1.363159] Disabling unused clock "gpt2_ick"
- [ 1.363159] Disabling unused clock "gpt3_ick"
- [ 1.363189] Disabling unused clock "gpt4_ick"
- [ 1.363189] Disabling unused clock "gpt5_ick"
- [ 1.363220] Disabling unused clock "gpt6_ick"
- [ 1.363220] Disabling unused clock "gpt7_ick"
- [ 1.363250] Disabling unused clock "gpt8_ick"
- [ 1.363250] Disabling unused clock "gpt9_ick"
- [ 1.363281] Disabling unused clock "gpio2_dbck"
- [ 1.363281] Disabling unused clock "gpio3_dbck"
- [ 1.363311] Disabling unused clock "gpio4_dbck"
- [ 1.363311] Disabling unused clock "gpio5_dbck"
- [ 1.363342] Disabling unused clock "gpio6_dbck"
- [ 1.363342] Disabling unused clock "gpt9_fck"
- [ 1.363342] Disabling unused clock "gpt8_fck"
- [ 1.363372] Disabling unused clock "gpt7_fck"
- [ 1.363372] Disabling unused clock "gpt6_fck"
- [ 1.363403] Disabling unused clock "gpt5_fck"
- [ 1.363403] Disabling unused clock "gpt4_fck"
- [ 1.363433] Disabling unused clock "gpt3_fck"
- [ 1.363433] Disabling unused clock "gpt2_fck"
- [ 1.363464] Disabling unused clock "gpio1_dbck"
- [ 1.363494] Disabling unused clock "ssi_ick"
- [ 1.363494] Disabling unused clock "gpt10_ick"
- [ 1.363525] Disabling unused clock "gpt11_ick"
- [ 1.363525] Disabling unused clock "uart1_ick"
- [ 1.363525] Disabling unused clock "uart2_ick"
- [ 1.363555] Disabling unused clock "usbtll_ick"
- [ 1.363586] Disabling unused clock "ssi_ssr_fck"
- [ 1.363586] Disabling unused clock "uart1_fck"
- [ 1.363616] Disabling unused clock "uart2_fck"
- [ 1.363616] Disabling unused clock "usbtll_fck"
- [ 1.363647] Disabling unused clock "ts_fck"
- [ 1.363677] Disabling unused clock "cpefuse_fck"
- [ 1.363677] Disabling unused clock "gpt11_fck"
- [ 1.363708] Disabling unused clock "gpt10_fck"
- [ 1.363708] Disabling unused clock "dpll4_m6x2_ck"
- [ 1.363739] Disabling unused clock "dpll4_m5x2_ck"
- [ 1.363739] Disabling unused clock "dpll3_m3x2_ck"
- [ 1.363769] Disabling unused clock "sys_clkout1"
- [ 1.364074] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 1.424560] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
- [ 1.426422] regulator_init_complete: incomplete constraints, leaving rm696_vmmc1 on
- [ 1.435058] asoc: WL1273 BT/FM codec <-> omap-mcbsp-dai-2 mapping ok
- [ 1.442565] Freeing init memory: 10568K
- [ 1.443450] Warning: unable to open an initial console.
- [ 1.540649] mmc0: new high speed MMC card at address 0001
- [ 1.549285] mmcblk0: mmc0:0001 HYNIX 14.8 GiB
- [ 1.549743] mmcblk0:mmc_queue_do_make_request process kmmcd (pid 15), read to sector 0, sectors 8
- [ 1.558898] p1 p2 p3 p4
- [ 1.612121] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 1.628265] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 1.629272] mmc1: new SDIO card at address 0001
- [ 1.671203] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input4
- [ 1.715240] g_nokia: Unknown symbol phonet_header_ops
- [ 1.738159] g_nokia: Unknown symbol phonet_header_ops
- [ 1.869934] UBI: attaching mtd4 to ubi0
- [ 1.870025] UBI DBG (pid 104): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 1.870056] UBI DBG (pid 104): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 1.870056] UBI DBG (pid 104): io_init: min_io_size 4096
- [ 1.870056] UBI DBG (pid 104): io_init: max_write_size 4096
- [ 1.870086] UBI DBG (pid 104): io_init: hdrs_min_io_size 1024
- [ 1.870086] UBI DBG (pid 104): io_init: ec_hdr_alsize 1024
- [ 1.870086] UBI DBG (pid 104): io_init: vid_hdr_alsize 1024
- [ 1.870086] UBI DBG (pid 104): io_init: vid_hdr_offset 1024
- [ 1.870117] UBI DBG (pid 104): io_init: vid_hdr_aloffset 1024
- [ 1.870117] UBI DBG (pid 104): io_init: vid_hdr_shift 0
- [ 1.870117] UBI DBG (pid 104): io_init: leb_start 4096
- [ 1.870117] UBI DBG (pid 104): io_init: max_erroneous 183
- [ 1.870147] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 1.874511] UBI: logical eraseblock size: 258048 bytes
- [ 1.887573] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 1.899353] UBI: smallest flash I/O unit: 4096
- [ 1.899444] UBI: sub-page size: 1024
- [ 1.909088] UBI: VID header offset: 1024 (aligned 1024)
- [ 1.909545] UBI: data offset: 4096
- [ 1.943298] onenand_wait: correctable ECC error = 0x5555, addr1 0x7f, addr8 0x0
- [ 1.943328] UBI DBG (pid 104): ubi_io_read: fixable bit-flip detected at PEB 40
- [ 1.975769] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0xd8 addr8 0x0
- [ 1.975799] OneNAND eraseblock 216 is an initial bad block
- [ 1.981750] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 2.158935] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x461 addr8 0x0
- [ 2.158935] OneNAND eraseblock 1121 is an initial bad block
- [ 2.307891] UBI DBG (pid 104): ubi_scan: scanning is finished
- [ 2.308013] UBI: max. sequence number: 0
- [ 2.308105] UBI error: ubi_read_volume_table: the layout volume was not found
- [ 2.314331] UBI error: ubi_attach_mtd_dev: failed to attach by scanning, error -22
- [ 2.325927] UBI: attaching mtd5 to ubi0
- [ 2.326049] UBI DBG (pid 105): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 2.326049] UBI DBG (pid 105): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 2.326049] UBI DBG (pid 105): io_init: min_io_size 4096
- [ 2.326080] UBI DBG (pid 105): io_init: max_write_size 4096
- [ 2.326080] UBI DBG (pid 105): io_init: hdrs_min_io_size 1024
- [ 2.326080] UBI DBG (pid 105): io_init: ec_hdr_alsize 1024
- [ 2.326080] UBI DBG (pid 105): io_init: vid_hdr_alsize 1024
- [ 2.326110] UBI DBG (pid 105): io_init: vid_hdr_offset 1024
- [ 2.326110] UBI DBG (pid 105): io_init: vid_hdr_aloffset 1024
- [ 2.326110] UBI DBG (pid 105): io_init: vid_hdr_shift 0
- [ 2.326110] UBI DBG (pid 105): io_init: leb_start 4096
- [ 2.326141] UBI DBG (pid 105): io_init: max_erroneous 16
- [ 2.326141] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 2.331817] UBI: logical eraseblock size: 258048 bytes
- [ 2.337158] UBI: smallest flash I/O unit: 4096
- [ 2.341857] UBI: sub-page size: 1024
- [ 2.346588] UBI: VID header offset: 1024 (aligned 1024)
- [ 2.352600] UBI: data offset: 4096
- [ 2.383941] UBI DBG (pid 105): ubi_scan: scanning is finished
- [ 2.383972] UBI: max. sequence number: 2
- [ 2.389892] UBI: attached mtd5 to ubi0
- [ 2.389984] UBI: MTD device name: "moslo"
- [ 2.393096] UBI: MTD device size: 32 MiB
- [ 2.397918] UBI: number of good PEBs: 128
- [ 2.402618] UBI: number of bad PEBs: 0
- [ 2.407012] UBI: number of corrupted PEBs: 0
- [ 2.411468] UBI: max. allowed volumes: 128
- [ 2.416076] UBI: wear-leveling threshold: 4096
- [ 2.420806] UBI: number of internal volumes: 1
- [ 2.425231] UBI: number of user volumes: 0
- [ 2.429687] UBI: available PEBs: 122
- [ 2.434326] UBI: total number of reserved PEBs: 6
- [ 2.438995] UBI: number of PEBs reserved for bad PEB handling: 2
- [ 2.445037] UBI: max/mean erase counter: 2/1
- [ 2.449310] UBI: image sequence number: -1223690438
- [ 2.454284] UBI: background thread "ubi_bgt0d" started, PID 107
- [ 2.476074] UBI DBG (pid 111): ubi_detach_mtd_dev: detaching mtd5 from ubi0
- [ 2.476776] UBI: mtd5 is detached from ubi0
- [ 4.079528] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
- [ 4.090576] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
- [ 4.132385] EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended
- [ 4.161224] EXT4-fs (mmcblk0p4): recovery complete
- [ 4.161376] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode
- Sun Jun 2 18:59:27 UTC 2013
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32.54-ubiboot-02 (juice@osiris) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 PREEMPT Fri May 31 11:04:03 EEST 2013
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: Nokia RM-696 board
- [ 0.000000] Overriding kernel command line
- [ 0.000000] Original command line: init=/sbin/preinit root=/dev/mmcblk0p2 rootwait rootflags=errors=remount-ro rootfstype=ext4 rw mtdoops.mtddev=log mtdoops.record_size=65536 console=tty0 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) bootreason=pwr_key bootmode=normal nolo=2.3.6 product_name=RM-696 dbi-type=V5JW dbi-vendor=1 dbi-size=73 dbi-uid=0137454C530016004C24 imei=357923041317688 g_nokia.iSerialNumber=357923041317688 serialnumber=CCM976757 omap_sec.kci=958 gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output omapdss.def_disp_enabled=1 vhash=285e93eebfdded180a3ffdf0a42c0d09b0d8ce8a product_model=N9 hwid=1507
- [ 0.000000] Reserving 14680064 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3630 ES1.2-hs (l2cache iva sgx neon isp 192mhz_clk )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- [ 0.000000] On node 0 totalpages: 257024
- [ 0.000000] free_area_init_node: node 0, pgdat b0fc7030, node_mem_map b1005000
- [ 0.000000] Normal zone: 2048 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 254976 pages, LIFO batch:31
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254976
- [ 0.000000] Kernel command line: init=/init root=0xB302 rootfstype=ext4 rw console=ttyS0,115200n8 mtdparts=omap2-onenand:1024k(bootloader),2816k@1024k(config),16384k@3840k(kernel),2048k@20224k(log),469248k@22272k(var),32768k@491520k(moslo) gpio=cmt_apeslpx:93:sysfs:output,cmt_en:23:sysfs:init_active:output,cmt_rst_rq:88:sysfs:init_active:output,sleep_ind:92:sysfs:output
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 5242880 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 1002MB 2MB = 1004MB total
- [ 0.000000] Memory: 997248KB available (5180K code, 473K data, 10568K init, 0K highmem)
- [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:402
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 38.4/390/600 MHz
- [ 0.000000] Reprogramming SDRC clock to 390400000 Hz
- [ 0.000000] GPMC revision 5.0
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP GPIO hardware version 2.5
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000122] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
- [ 0.039184] Security Framework initialized
- [ 0.039215] Mount-cache hash table entries: 512
- [ 0.039581] Initializing cgroup subsys ns
- [ 0.039581] Initializing cgroup subsys cpuacct
- [ 0.039611] Initializing cgroup subsys memory
- [ 0.039642] Initializing cgroup subsys devices
- [ 0.039642] Initializing cgroup subsys freezer
- [ 0.039703] CPU: Testing write buffer coherency: ok
- [ 0.040191] devtmpfs: initialized
- [ 0.044555] regulator: core version 0.5
- [ 0.044708] NET: Registered protocol family 16
- [ 0.045471] RM-696 board, rev 1507
- [ 0.046234] MUX: setup AB1_3430_MMC3_CLK (0xfa0021d2): 0x0004 -> 0x011b
- [ 0.046264] MUX: setup AC3_3430_MMC3_CMD (0xfa0021d0): 0x011c -> 0x011b
- [ 0.046264] MUX: setup AE4_3430_MMC3_DAT0 (0xfa002164): 0x011c -> 0x011b
- [ 0.046295] MUX: setup AH3_3430_MMC3_DAT1 (0xfa002166): 0x011c -> 0x011b
- [ 0.046295] MUX: setup AF3_3430_MMC3_DAT2 (0xfa002168): 0x011c -> 0x011b
- [ 0.046325] MUX: setup AE3_3430_MMC3_DAT3 (0xfa00216a): 0x011c -> 0x011b
- [ 0.046569] MUX: setup H16_34XX_SDRC_CKE0 (0xfa002262): 0x0118 -> 0x0000
- [ 0.046569] MUX: setup H17_34XX_SDRC_CKE1 (0xfa002264): 0x0118 -> 0x0000
- [ 0.046600] SmartReflex class 1.5 driver: initialized
- [ 0.048522] OMAP DMA hardware revision 5.0
- [ 0.048614] Reserving DMA channels 0 and 1 for HS ROM code
- [ 0.051544] bio: create slab <bio-0> at 0
- [ 0.052032] regulator: VSDIO: 1800 mV normal standby
- [ 0.052124] regulator: vbat: 3700 mV
- [ 0.052246] regulator: VEMMC: 2900 mV normal standby
- [ 0.053527] i2c_omap i2c_omap.1: bus 1 rev4.0 at 2900 kHz
- [ 0.068389] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 0.068420] twl4030: power (irq 373) chaining IRQs 376..383
- [ 0.068817] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 0.069610] regulator: VUSB1V5: 1500 mV normal standby
- [ 0.069793] regulator: VUSB1V8: 1800 mV normal standby
- [ 0.069976] regulator: VUSB3V1: 3100 mV normal standby
- [ 0.071807] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.072570] regulator: VPLL1: 1800 mV normal standby
- [ 0.073944] regulator: VIO: 1800 mV normal standby
- [ 0.074157] regulator: VMMC1: 1850 <--> 3150 mV normal standby
- [ 0.074432] regulator: VDAC: 1800 mV normal standby
- [ 0.074707] regulator: VAUX2: 1800 mV normal standby
- [ 0.075134] regulator: VINTANA1: 1500 mV normal standby
- [ 0.075622] regulator: VINTANA2: 2750 mV normal standby
- [ 0.076049] regulator: VINTDIG: 1500 mV normal standby
- [ 0.076293] regulator: VPLL2: 1800 mV normal standby
- [ 0.076568] regulator: VMMC2: 3000 mV normal standby
- [ 0.076843] regulator: VSIM: 1800 mV normal standby
- [ 0.077117] regulator: VAUX1: 2800 mV normal standby
- [ 0.077423] regulator: VAUX3: 2800 mV normal standby
- [ 0.077697] regulator: VAUX4: 2800 mV normal standby
- [ 0.078247] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- [ 0.078765] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
- [ 0.080047] Bluetooth: Core ver 2.15
- [ 0.080169] NET: Registered protocol family 31
- [ 0.080200] Bluetooth: HCI device and connection manager initialized
- [ 0.080200] Bluetooth: HCI socket layer initialized
- [ 0.080474] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.080780] Switching to clocksource 32k_counter
- [ 0.081481] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
- [ 0.081573] HS USB OTG: revision 0x40, sysconfig 0x2015, sysstatus 0x1, intrfsel 0x1, simenable 0x0
- [ 0.081604] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- [ 0.081634] musb_hdrc: MHDRC RTL version 1.800
- [ 0.081665] musb_hdrc: 18/31 max ep, 14592/16384 memory
- [ 0.081695] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
- [ 0.082061] NET: Registered protocol family 2
- [ 0.082183] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.082550] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.085205] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.086273] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.086273] TCP reno registered
- [ 0.086425] NET: Registered protocol family 1
- [ 0.154754] dspbridge_init: 600000 bytes @ bea00000
- [ 0.154846] hs_init: omap_hs driver
- [ 0.155792] omap-iommu omap-iommu.0: isp registered
- [ 0.155883] sec_init: omap_sec driver
- [ 0.155883] sec_init: kci parameter is not set
- [ 0.156188] audit: initializing netlink socket (disabled)
- [ 0.156250] type=2000 audit(0.148:1): initialized
- [ 0.165893] fuse init (API version 7.13)
- [ 0.167327] Btrfs loaded
- [ 0.167358] msgmni has been set to 1948
- [ 0.170166] io scheduler noop registered
- [ 0.170196] io scheduler anticipatory registered
- [ 0.170196] io scheduler deadline registered
- [ 0.170501] io scheduler cfq registered (default)
- [ 0.229583] OMAP DSS rev 2.0
- [ 0.229675] OMAP DISPC rev 3.0
- [ 0.229705] OMAP VENC rev 2
- [ 0.229888] OMAP DSI rev 1.0
- [ 0.252227] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
- [ 0.252899] serial8250.2: ttyS0 at MMIO 0x49020000 (irq = 74) is a TI16750
- [ 0.964691] console [ttyS0] enabled
- [ 0.973541] brd: module loaded
- [ 0.976196] loop: module loaded
- [ 0.977783] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 0.980957] OneNAND driver initializing
- [ 0.984802] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base f0040000, freq 83 MHz
- [ 0.995452] OneNAND Manufacturer: Samsung (0xec)
- [ 0.995452] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
- [ 1.000152] OneNAND version = 0x0232
- [ 1.003753] Chip support all block unlock
- [ 1.003753] Chip has 4KiB pagesize
- [ 1.003814] 6 cmdlinepart partitions found on MTD device omap2-onenand
- [ 1.010284] Creating 6 MTD partitions on "omap2-onenand":
- [ 1.015716] 0x000000000000-0x000000100000 : "bootloader"
- [ 1.021759] 0x000000100000-0x0000003c0000 : "config"
- [ 1.026580] 0x0000003c0000-0x0000013c0000 : "kernel"
- [ 1.031494] 0x0000013c0000-0x0000015c0000 : "log"
- [ 1.036224] 0x0000015c0000-0x00001e000000 : "var"
- [ 1.040924] 0x00001e000000-0x000020000000 : "moslo"
- [ 1.046783] tun: Universal TUN/TAP device driver, 1.6
- [ 1.050354] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.073822] input: ECI Accessory as /devices/virtual/input/input0
- [ 1.074951] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
- [ 1.082122] i2c /dev entries driver
- [ 1.085571] Linux media interface: v0.10
- [ 1.089050] Linux video capture interface: v2.00
- [ 1.094879] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 1.100402] HACK: TWL5031 WDT can't be disabled. Automatic WDT refresh started
- [ 1.106903] cpuidle: using governor ladder
- [ 1.110900] cpuidle: using governor menu
- [ 1.115661] omap_sham_mod_init: loading omap-sham driver
- [ 1.120269] omap-sham omap-sham: hw accel on OMAP rev 0.9
- [ 1.127014] Advanced Linux Sound Architecture Driver Version 1.0.21.
- [ 1.158660] input: Atmel mXT Touchscreen as /devices/platform/i2c_omap.2/i2c-2/2-004b/input/input1
- [ 1.162322] atmel_mxt: Atmel mXT Touchscreen v1.6 (0x29b82f) var:0x1 bld:0xab
- [ 1.171783] No device for DAI omap-mcbsp-dai-0
- [ 1.173675] No device for DAI omap-mcbsp-dai-1
- [ 1.178161] No device for DAI omap-mcbsp-dai-2
- [ 1.182586] No device for DAI omap-mcbsp-dai-3
- [ 1.187011] No device for DAI omap-mcbsp-dai-4
- [ 1.191589] mmc0: hardware reset done
- [ 1.247436] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
- [ 1.250091] input: dfl61-twl4030 Jack as /devices/platform/soc-audio.0/sound/card0/input2
- [ 1.256744] DFL61 TWL SoC init done (config 4)
- [ 1.260559] asoc: tlv320dac33 <-> omap-mcbsp-dai-1 mapping ok
- [ 1.266632] ALSA device list:
- [ 1.268707] #0: dfl61-twl4030 (twl4030)
- [ 1.272674] #1: dfl61-dac33 (tlv320dac33)
- [ 1.277374] misc iphb: Module registered in 2.6.32.54-ubiboot-02, built May 31 2013 08:40:57
- [ 1.285400] TCP cubic registered
- [ 1.288543] NET: Registered protocol family 17
- [ 1.293029] NET: Registered protocol family 15
- [ 1.297454] Bluetooth: L2CAP ver 2.14
- [ 1.301116] Bluetooth: L2CAP socket layer initialized
- [ 1.306152] Bluetooth: SCO (Voice Link) ver 0.6
- [ 1.310699] Bluetooth: SCO socket layer initialized
- [ 1.315765] Bluetooth: RFCOMM TTY layer initialized
- [ 1.320465] Bluetooth: RFCOMM socket layer initialized
- [ 1.325622] Bluetooth: RFCOMM ver 1.11
- [ 1.329376] Power Management for TI OMAP3.
- [ 1.334838] SmartReflex device[1] initialized
- [ 1.337860] SmartReflex device[2] initialized
- [ 1.343017] input: gpio-keys as /devices/platform/gpio-keys/input/input3
- [ 1.353576] Disabling unused clock "gpt2_ick"
- [ 1.353607] Disabling unused clock "gpt3_ick"
- [ 1.353637] Disabling unused clock "gpt4_ick"
- [ 1.353637] Disabling unused clock "gpt5_ick"
- [ 1.353668] Disabling unused clock "gpt6_ick"
- [ 1.353668] Disabling unused clock "gpt7_ick"
- [ 1.353698] Disabling unused clock "gpt8_ick"
- [ 1.353698] Disabling unused clock "gpt9_ick"
- [ 1.353729] Disabling unused clock "gpio2_dbck"
- [ 1.353729] Disabling unused clock "gpio3_dbck"
- [ 1.353759] Disabling unused clock "gpio4_dbck"
- [ 1.353759] Disabling unused clock "gpio5_dbck"
- [ 1.353790] Disabling unused clock "gpio6_dbck"
- [ 1.353790] Disabling unused clock "gpt9_fck"
- [ 1.353790] Disabling unused clock "gpt8_fck"
- [ 1.353820] Disabling unused clock "gpt7_fck"
- [ 1.353820] Disabling unused clock "gpt6_fck"
- [ 1.353851] Disabling unused clock "gpt5_fck"
- [ 1.353851] Disabling unused clock "gpt4_fck"
- [ 1.353881] Disabling unused clock "gpt3_fck"
- [ 1.353881] Disabling unused clock "gpt2_fck"
- [ 1.353912] Disabling unused clock "gpio1_dbck"
- [ 1.353912] Disabling unused clock "ssi_ick"
- [ 1.353942] Disabling unused clock "gpt10_ick"
- [ 1.353973] Disabling unused clock "gpt11_ick"
- [ 1.353973] Disabling unused clock "uart1_ick"
- [ 1.353973] Disabling unused clock "uart2_ick"
- [ 1.354003] Disabling unused clock "usbtll_ick"
- [ 1.354034] Disabling unused clock "ssi_ssr_fck"
- [ 1.354034] Disabling unused clock "uart1_fck"
- [ 1.354064] Disabling unused clock "uart2_fck"
- [ 1.354064] Disabling unused clock "usbtll_fck"
- [ 1.354095] Disabling unused clock "ts_fck"
- [ 1.354125] Disabling unused clock "cpefuse_fck"
- [ 1.354125] Disabling unused clock "gpt11_fck"
- [ 1.354156] Disabling unused clock "gpt10_fck"
- [ 1.354156] Disabling unused clock "dpll4_m6x2_ck"
- [ 1.354187] Disabling unused clock "dpll4_m5x2_ck"
- [ 1.354187] Disabling unused clock "dpll3_m3x2_ck"
- [ 1.354217] Disabling unused clock "sys_clkout1"
- [ 1.354583] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 1.417297] panel-nokia-dsi display0: pyrenees panel revision fe.91.96
- [ 1.419128] regulator_init_complete: incomplete constraints, leaving rm696_vmmc1 on
- [ 1.427825] asoc: WL1273 BT/FM codec <-> omap-mcbsp-dai-2 mapping ok
- [ 1.435302] Freeing init memory: 10568K
- [ 1.436218] Warning: unable to open an initial console.
- [ 1.580261] mmc0: new high speed MMC card at address 0001
- [ 1.588897] mmcblk0: mmc0:0001 HYNIX 14.8 GiB
- [ 1.589294] mmcblk0:mmc_queue_do_make_request process kmmcd (pid 15), read to sector 0, sectors 8
- [ 1.598480] p1 p2 p3 p4
- [ 1.643859] input: TWL4030 Keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input4
- [ 1.657714] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 1.676391] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 1.677459] mmc1: new SDIO card at address 0001
- [ 1.716735] g_nokia: Unknown symbol phonet_header_ops
- [ 1.739685] g_nokia: Unknown symbol phonet_header_ops
- [ 1.871063] UBI: attaching mtd4 to ubi0
- [ 1.871154] UBI DBG (pid 107): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 1.871185] UBI DBG (pid 107): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 1.871185] UBI DBG (pid 107): io_init: min_io_size 4096
- [ 1.871185] UBI DBG (pid 107): io_init: max_write_size 4096
- [ 1.871215] UBI DBG (pid 107): io_init: hdrs_min_io_size 1024
- [ 1.871215] UBI DBG (pid 107): io_init: ec_hdr_alsize 1024
- [ 1.871215] UBI DBG (pid 107): io_init: vid_hdr_alsize 1024
- [ 1.871246] UBI DBG (pid 107): io_init: vid_hdr_offset 1024
- [ 1.871246] UBI DBG (pid 107): io_init: vid_hdr_aloffset 1024
- [ 1.871246] UBI DBG (pid 107): io_init: vid_hdr_shift 0
- [ 1.871246] UBI DBG (pid 107): io_init: leb_start 4096
- [ 1.871276] UBI DBG (pid 107): io_init: max_erroneous 183
- [ 1.871276] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 1.875640] UBI: logical eraseblock size: 258048 bytes
- [ 1.887176] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 1.900665] UBI: smallest flash I/O unit: 4096
- [ 1.900756] UBI: sub-page size: 1024
- [ 1.910461] UBI: VID header offset: 1024 (aligned 1024)
- [ 1.910919] UBI: data offset: 4096
- [ 1.969268] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0xd8 addr8 0x0
- [ 1.969299] OneNAND eraseblock 216 is an initial bad block
- [ 1.979583] onenand_wait: correctable ECC error = 0x5555, addr1 0x4, addr8 0x50
- [ 2.156372] onenand_bbt_wait: ecc 0xaaaa ctrl 0x0400 intr 0x8080 addr1 0x461 addr8 0x0
- [ 2.156372] OneNAND eraseblock 1121 is an initial bad block
- [ 2.305328] UBI DBG (pid 107): ubi_scan: scanning is finished
- [ 2.305450] UBI: max. sequence number: 0
- [ 2.305541] UBI error: ubi_read_volume_table: the layout volume was not found
- [ 2.311767] UBI error: ubi_attach_mtd_dev: failed to attach by scanning, error -22
- [ 2.323394] UBI: attaching mtd5 to ubi0
- [ 2.323486] UBI DBG (pid 108): ubi_attach_mtd_dev: sizeof(struct ubi_scan_leb) 40
- [ 2.323516] UBI DBG (pid 108): ubi_attach_mtd_dev: sizeof(struct ubi_wl_entry) 20
- [ 2.323516] UBI DBG (pid 108): io_init: min_io_size 4096
- [ 2.323516] UBI DBG (pid 108): io_init: max_write_size 4096
- [ 2.323547] UBI DBG (pid 108): io_init: hdrs_min_io_size 1024
- [ 2.323547] UBI DBG (pid 108): io_init: ec_hdr_alsize 1024
- [ 2.323547] UBI DBG (pid 108): io_init: vid_hdr_alsize 1024
- [ 2.323547] UBI DBG (pid 108): io_init: vid_hdr_offset 1024
- [ 2.323577] UBI DBG (pid 108): io_init: vid_hdr_aloffset 1024
- [ 2.323577] UBI DBG (pid 108): io_init: vid_hdr_shift 0
- [ 2.323577] UBI DBG (pid 108): io_init: leb_start 4096
- [ 2.323577] UBI DBG (pid 108): io_init: max_erroneous 16
- [ 2.323608] UBI: physical eraseblock size: 262144 bytes (256 KiB)
- [ 2.329162] UBI: logical eraseblock size: 258048 bytes
- [ 2.334594] UBI: smallest flash I/O unit: 4096
- [ 2.339294] UBI: sub-page size: 1024
- [ 2.343994] UBI: VID header offset: 1024 (aligned 1024)
- [ 2.350036] UBI: data offset: 4096
- [ 2.381378] UBI DBG (pid 108): ubi_scan: scanning is finished
- [ 2.381408] UBI: max. sequence number: 2
- [ 2.387451] UBI: attached mtd5 to ubi0
- [ 2.387542] UBI: MTD device name: "moslo"
- [ 2.390594] UBI: MTD device size: 32 MiB
- [ 2.395568] UBI: number of good PEBs: 128
- [ 2.400115] UBI: number of bad PEBs: 0
- [ 2.404571] UBI: number of corrupted PEBs: 0
- [ 2.408996] UBI: max. allowed volumes: 128
- [ 2.413635] UBI: wear-leveling threshold: 4096
- [ 2.418334] UBI: number of internal volumes: 1
- [ 2.422790] UBI: number of user volumes: 0
- [ 2.427246] UBI: available PEBs: 122
- [ 2.431854] UBI: total number of reserved PEBs: 6
- [ 2.436584] UBI: number of PEBs reserved for bad PEB handling: 2
- [ 2.442596] UBI: max/mean erase counter: 2/1
- [ 2.446838] UBI: image sequence number: -1223690438
- [ 2.451843] UBI: background thread "ubi_bgt0d" started, PID 110
- [ 2.473724] UBI DBG (pid 114): ubi_detach_mtd_dev: detaching mtd5 from ubi0
- [ 2.474456] UBI: mtd5 is detached from ubi0
- [ 4.079986] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
- [ 4.090911] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
- [ 4.132781] EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended
- [ 4.160522] EXT4-fs (mmcblk0p4): recovery complete
- [ 4.160675] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement