Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Disk: da10 - this disk show most errormessages in /var/log/messages:
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Black
- Device Model: WDC WD2001FASS-00U0B0
- Serial Number: WD-WMAUR0195211
- LU WWN Device Id: 5 0014ee 0575a927a
- Firmware Version: 01.00101
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Wed Mar 18 19:06:01 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (31980) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 365) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 075 047 021 - 13258
- 4 Start_Stop_Count -O--CK 100 100 000 - 67
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 046 046 000 - 39821
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 66
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 65
- 193 Load_Cycle_Count -O--CK 075 075 000 - 377121
- 194 Temperature_Celsius -O---K 114 103 000 - 38
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
- 0xb6 GPL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 39772 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 38 Celsius
- Power Cycle Min/Max Temperature: 37/38 Celsius
- Lifetime Min/Max Temperature: 38/49 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (138)
- Index Estimated Time Temperature Celsius
- 139 2015-03-18 11:09 38 *******************
- ... ..(476 skipped). .. *******************
- 138 2015-03-18 19:06 38 *******************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 2 R_ERR response for non-data FIS
- 0x0006 2 2 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 16 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 78739 Vendor specific
- ------------------------------------------------------------
- Disk: da3
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Black
- Device Model: WDC WD2001FASS-00U0B0
- Serial Number: WD-WMAUR0195198
- LU WWN Device Id: 5 0014ee 0acb02a27
- Firmware Version: 01.00101
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Wed Mar 18 19:06:28 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (31800) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 363) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 073 045 021 - 13375
- 4 Start_Stop_Count -O--CK 100 100 000 - 67
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 046 046 000 - 39821
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 66
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 65
- 193 Load_Cycle_Count -O--CK 075 075 000 - 377035
- 194 Temperature_Celsius -O---K 111 103 000 - 41
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
- 0xb6 GPL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 39772 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 41 Celsius
- Power Cycle Min/Max Temperature: 40/42 Celsius
- Lifetime Min/Max Temperature: 41/49 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (157)
- Index Estimated Time Temperature Celsius
- 158 2015-03-18 11:09 42 ***********************
- ... ..(343 skipped). .. ***********************
- 24 2015-03-18 16:53 42 ***********************
- 25 2015-03-18 16:54 41 **********************
- ... ..( 19 skipped). .. **********************
- 45 2015-03-18 17:14 41 **********************
- 46 2015-03-18 17:15 42 ***********************
- ... ..(110 skipped). .. ***********************
- 157 2015-03-18 19:06 42 ***********************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 3 R_ERR response for non-data FIS
- 0x0006 2 3 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 78766 Vendor specific
- ----------------------------------------------------
- Disk: da4
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Black
- Device Model: WDC WD2001FASS-00U0B0
- Serial Number: WD-WMAUR0196214
- LU WWN Device Id: 5 0014ee 0acb02509
- Firmware Version: 01.00101
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Wed Mar 18 19:06:31 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (31080) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 355) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 074 045 021 - 13300
- 4 Start_Stop_Count -O--CK 100 100 000 - 66
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 046 046 000 - 39821
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 65
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 64
- 193 Load_Cycle_Count -O--CK 075 075 000 - 377083
- 194 Temperature_Celsius -O---K 110 099 000 - 42
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
- 0xb6 GPL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 39772 -
- # 2 Short offline Completed without error 00% 36912 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 42 Celsius
- Power Cycle Min/Max Temperature: 41/42 Celsius
- Lifetime Min/Max Temperature: 42/53 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (163)
- Index Estimated Time Temperature Celsius
- 164 2015-03-18 11:09 42 ***********************
- ... ..(476 skipped). .. ***********************
- 163 2015-03-18 19:06 42 ***********************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 3 R_ERR response for non-data FIS
- 0x0006 2 3 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 78768 Vendor specific
- -------------------------------------------------
- Disk: da5
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD2001FFSX-68JNUN0
- Serial Number: WD-WMC5C0D7T585
- LU WWN Device Id: 5 0014ee 0ae8e68a3
- Firmware Version: 81.00A81
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Mar 18 19:06:35 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (23280) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 254) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x70bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 169 167 021 - 6508
- 4 Start_Stop_Count -O--CK 100 100 000 - 25
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 096 096 000 - 3228
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 25
- 16 Unknown_Attribute -O---K 003 197 000 - 64767661725
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 24
- 193 Load_Cycle_Count -O--CK 200 200 000 - 256
- 194 Temperature_Celsius -O---K 116 109 000 - 34
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x24 GPL R/O 1 Current Device Internal Status Data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 1
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1 [0] occurred at disk power-on lifetime: 3222 hours (134 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 43 7c 4d 78 40 00 Error: UNC at LBA = 0x437c4d78 = 1132219768
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 10 00 00 43 7c 4d 78 40 00 15:35:42.835 READ FPDMA QUEUED
- 60 00 d0 00 08 00 00 43 7c 4c a8 40 00 15:35:42.834 READ FPDMA QUEUED
- 60 00 e8 00 00 00 00 43 7c 4b b8 40 00 15:35:42.834 READ FPDMA QUEUED
- 60 00 88 00 00 00 00 43 7c 22 08 40 00 15:35:42.831 READ FPDMA QUEUED
- 60 00 f0 00 00 00 00 43 7c 21 18 40 00 15:35:42.828 READ FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 3179 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 34 Celsius
- Power Cycle Min/Max Temperature: 34/35 Celsius
- Lifetime Min/Max Temperature: 21/41 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (465)
- Index Estimated Time Temperature Celsius
- 466 2015-03-18 11:09 35 ****************
- ... ..( 91 skipped). .. ****************
- 80 2015-03-18 12:41 35 ****************
- 81 2015-03-18 12:42 34 ***************
- ... ..( 5 skipped). .. ***************
- 87 2015-03-18 12:48 34 ***************
- 88 2015-03-18 12:49 35 ****************
- ... ..(376 skipped). .. ****************
- 465 2015-03-18 19:06 35 ****************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Description
- 1 ===== = = == General Statistics (rev 2) ==
- 1 0x008 4 25 Lifetime Power-On Resets
- 1 0x010 4 3228 Power-on Hours
- 1 0x018 6 13046749869 Logical Sectors Written
- 1 0x020 6 81364969 Number of Write Commands
- 1 0x028 6 51720911879 Logical Sectors Read
- 1 0x030 6 520197067 Number of Read Commands
- 1 0x048 7 368~ Unknown
- 3 ===== = = == Rotating Media Statistics (rev 1) ==
- 3 0x008 4 3111 Spindle Motor Power-on Hours
- 3 0x010 4 2932 Head Flying Hours
- 3 0x018 4 281 Head Load Events
- 3 0x020 4 200~ Number of Reallocated Logical Sectors
- 3 0x028 4 1 Read Recovery Attempts
- 3 0x030 4 0 Number of Mechanical Start Failures
- 4 ===== = = == General Errors Statistics (rev 1) ==
- 4 0x008 4 1 Number of Reported Uncorrectable Errors
- 4 0x010 4 65537 Resets Between Cmd Acceptance and Completion
- 5 ===== = = == Temperature Statistics (rev 1) ==
- 5 0x008 1 34 Current Temperature
- 5 0x010 1 34 Average Short Term Temperature
- 5 0x018 1 32 Average Long Term Temperature
- 5 0x020 1 40 Highest Temperature
- 5 0x028 1 24 Lowest Temperature
- 5 0x030 1 34 Highest Average Short Term Temperature
- 5 0x038 1 29 Lowest Average Short Term Temperature
- 5 0x040 1 33 Highest Average Long Term Temperature
- 5 0x048 1 32 Lowest Average Long Term Temperature
- 5 0x050 4 0 Time in Over-Temperature
- 5 0x058 1 60 Specified Maximum Operating Temperature
- 5 0x060 4 0 Time in Under-Temperature
- 5 0x068 1 0 Specified Minimum Operating Temperature
- 6 ===== = = == Transport Statistics (rev 1) ==
- 6 0x008 4 143 Number of Hardware Resets
- 6 0x010 4 0 Number of ASR Events
- 6 0x018 4 0 Number of Interface CRC Errors
- |_ ~ normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 78784 Vendor specific
- --------------------------------------------------------------
- Disk: da6
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Black
- Device Model: WDC WD2001FASS-00U0B0
- Serial Number: WD-WMAUR0195209
- LU WWN Device Id: 5 0014ee 0575a8bce
- Firmware Version: 01.00101
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Wed Mar 18 19:06:39 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (31800) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 363) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 077 048 021 - 13166
- 4 Start_Stop_Count -O--CK 100 100 000 - 66
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 046 046 000 - 39825
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 65
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 64
- 193 Load_Cycle_Count -O--CK 075 075 000 - 376658
- 194 Temperature_Celsius -O---K 113 098 000 - 39
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
- 0xb6 GPL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 39777 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 39 Celsius
- Power Cycle Min/Max Temperature: 38/41 Celsius
- Lifetime Min/Max Temperature: 39/54 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (443)
- Index Estimated Time Temperature Celsius
- 444 2015-03-18 11:09 40 *********************
- ... ..( 73 skipped). .. *********************
- 40 2015-03-18 12:23 40 *********************
- 41 2015-03-18 12:24 41 **********************
- ... ..(265 skipped). .. **********************
- 307 2015-03-18 16:50 41 **********************
- 308 2015-03-18 16:51 40 *********************
- ... ..( 15 skipped). .. *********************
- 324 2015-03-18 17:07 40 *********************
- 325 2015-03-18 17:08 39 ********************
- ... ..( 5 skipped). .. ********************
- 331 2015-03-18 17:14 39 ********************
- 332 2015-03-18 17:15 41 **********************
- ... ..( 78 skipped). .. **********************
- 411 2015-03-18 18:34 41 **********************
- 412 2015-03-18 18:35 40 *********************
- ... ..( 30 skipped). .. *********************
- 443 2015-03-18 19:06 40 *********************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 3 R_ERR response for non-data FIS
- 0x0006 2 3 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 78779 Vendor specific
- -------------------------------------------------------
- Disk: da7
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Black
- Device Model: WDC WD2001FASS-00U0B0
- Serial Number: WD-WMAUR0196336
- LU WWN Device Id: 5 0014ee 0575a9367
- Firmware Version: 01.00101
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 7200 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Wed Mar 18 19:06:42 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (30960) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 354) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 078 050 021 - 13133
- 4 Start_Stop_Count -O--CK 100 100 000 - 68
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 046 046 000 - 39823
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 67
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 66
- 193 Load_Cycle_Count -O--CK 075 075 000 - 377312
- 194 Temperature_Celsius -O---K 114 102 000 - 38
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
- 0xb6 GPL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 24 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 39774 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 38 Celsius
- Power Cycle Min/Max Temperature: 38/39 Celsius
- Lifetime Min/Max Temperature: 38/50 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (227)
- Index Estimated Time Temperature Celsius
- 228 2015-03-18 11:09 39 ********************
- ... ..(341 skipped). .. ********************
- 92 2015-03-18 16:51 39 ********************
- 93 2015-03-18 16:52 38 *******************
- ... ..( 21 skipped). .. *******************
- 115 2015-03-18 17:14 38 *******************
- 116 2015-03-18 17:15 39 ********************
- ... ..(110 skipped). .. ********************
- 227 2015-03-18 19:06 39 ********************
- SCT Error Recovery Control command not supported
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 1 R_ERR response for non-data FIS
- 0x0006 2 1 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 78782 Vendor specific
- ----------------------------------------------------------
- Disk: da8
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD2001FFSX-68JNUN0
- Serial Number: WD-WMC5C0D1E4YP
- LU WWN Device Id: 5 0014ee 003e3984a
- Firmware Version: 81.00A81
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Mar 18 19:06:46 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (23220) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 253) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x70bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 173 170 021 - 6316
- 4 Start_Stop_Count -O--CK 100 100 000 - 25
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 096 096 000 - 3228
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 25
- 16 Unknown_Attribute -O---K 003 197 000 - 55782201077
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 24
- 193 Load_Cycle_Count -O--CK 200 200 000 - 252
- 194 Temperature_Celsius -O---K 118 111 000 - 32
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x24 GPL R/O 1 Current Device Internal Status Data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 3
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 3 [2] occurred at disk power-on lifetime: 3222 hours (134 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 62 09 ea 50 40 00 Error: UNC at LBA = 0x6209ea50 = 1644816976
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 00 00 00 62 09 ea 40 40 00 15:35:42.789 READ FPDMA QUEUED
- 60 00 80 00 00 00 00 62 09 e8 b8 40 00 15:35:42.788 READ FPDMA QUEUED
- 60 00 e8 00 10 00 00 62 09 e7 d0 40 00 15:35:42.786 READ FPDMA QUEUED
- 60 01 00 00 08 00 00 62 09 e6 d0 40 00 15:35:42.785 READ FPDMA QUEUED
- 60 00 80 00 00 00 00 62 09 e5 d0 40 00 15:35:42.785 READ FPDMA QUEUED
- Error 2 [1] occurred at disk power-on lifetime: 960 hours (40 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 00 00 00 00 40 00 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 00 00 00 00 00 00 00 40 00 34d+10:26:23.661 READ FPDMA QUEUED
- ec 00 00 00 00 00 00 00 00 00 00 00 00 34d+10:26:23.660 IDENTIFY DEVICE
- ec 00 00 00 00 00 00 00 00 00 00 00 00 34d+10:26:23.660 IDENTIFY DEVICE
- 60 00 20 00 00 00 00 00 00 00 02 40 00 34d+10:26:23.660 READ FPDMA QUEUED
- 60 00 01 00 00 00 00 00 00 00 01 40 00 34d+10:26:23.660 READ FPDMA QUEUED
- Error 1 [0] occurred at disk power-on lifetime: 293 hours (12 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 87 57 22 a0 40 00 Error: UNC at LBA = 0x875722a0 = 2270634656
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 01 00 00 00 00 00 87 57 22 10 40 00 6d+15:03:54.558 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 87 57 21 10 40 00 6d+15:03:54.558 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 87 57 20 10 40 00 6d+15:03:54.557 READ FPDMA QUEUED
- 60 01 00 00 00 00 00 87 57 1f 10 40 00 6d+15:03:54.556 READ FPDMA QUEUED
- 60 00 f8 00 00 00 00 87 57 1e 18 40 00 6d+15:03:54.554 READ FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 3179 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 32 Celsius
- Power Cycle Min/Max Temperature: 32/34 Celsius
- Lifetime Min/Max Temperature: 20/38 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (463)
- Index Estimated Time Temperature Celsius
- 464 2015-03-18 11:09 33 **************
- ... ..( 87 skipped). .. **************
- 74 2015-03-18 12:37 33 **************
- 75 2015-03-18 12:38 32 *************
- ... ..( 9 skipped). .. *************
- 85 2015-03-18 12:48 32 *************
- 86 2015-03-18 12:49 33 **************
- ... ..(376 skipped). .. **************
- 463 2015-03-18 19:06 33 **************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Description
- 1 ===== = = == General Statistics (rev 2) ==
- 1 0x008 4 25 Lifetime Power-On Resets
- 1 0x010 4 3228 Power-on Hours
- 1 0x018 6 8771548196 Logical Sectors Written
- 1 0x020 6 81579739 Number of Write Commands
- 1 0x028 6 47010652904 Logical Sectors Read
- 1 0x030 6 486290847 Number of Read Commands
- 1 0x048 7 317~ Unknown
- 3 ===== = = == Rotating Media Statistics (rev 1) ==
- 3 0x008 4 3112 Spindle Motor Power-on Hours
- 3 0x010 4 2930 Head Flying Hours
- 3 0x018 4 277 Head Load Events
- 3 0x020 4 200~ Number of Reallocated Logical Sectors
- 3 0x028 4 0 Read Recovery Attempts
- 3 0x030 4 0 Number of Mechanical Start Failures
- 4 ===== = = == General Errors Statistics (rev 1) ==
- 4 0x008 4 3 Number of Reported Uncorrectable Errors
- 4 0x010 4 196611 Resets Between Cmd Acceptance and Completion
- 5 ===== = = == Temperature Statistics (rev 1) ==
- 5 0x008 1 32 Current Temperature
- 5 0x010 1 32 Average Short Term Temperature
- 5 0x018 1 31 Average Long Term Temperature
- 5 0x020 1 38 Highest Temperature
- 5 0x028 1 25 Lowest Temperature
- 5 0x030 1 33 Highest Average Short Term Temperature
- 5 0x038 1 29 Lowest Average Short Term Temperature
- 5 0x040 1 32 Highest Average Long Term Temperature
- 5 0x048 1 31 Lowest Average Long Term Temperature
- 5 0x050 4 0 Time in Over-Temperature
- 5 0x058 1 60 Specified Maximum Operating Temperature
- 5 0x060 4 0 Time in Under-Temperature
- 5 0x068 1 0 Specified Minimum Operating Temperature
- 6 ===== = = == Transport Statistics (rev 1) ==
- 6 0x008 4 141 Number of Hardware Resets
- 6 0x010 4 0 Number of ASR Events
- 6 0x018 4 0 Number of Interface CRC Errors
- |_ ~ normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 13 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 78795 Vendor specific
- ------------------------------------------------
- Disk: da14 (SAS! This disk is not in the scrubbed pool)
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HITACHI
- Product: HUS154545VLS300
- Revision: A4C2
- User Capacity: 450,098,159,616 bytes [450 GB]
- Logical block size: 512 bytes
- Rotation Rate: 15000 rpm
- Logical Unit id: 0x5000cca0090753b4
- Serial number: JMV40XEC
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Mar 18 19:06:06 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Current Drive Temperature: 45 C
- Drive Trip Temperature: 85 C
- Manufactured in week 29 of year 2008
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 31
- Elements in grown defect list: 0
- Vendor (Seagate) cache information
- Blocks sent to initiator = 50566780497690624
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 3937679 0 3937679 9716423 45533.285 0
- write: 0 20643240 0 20643240 20654246 60507.117 0
- verify: 0 467051 0 467051 501211 151724.673 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed 11 57203 - [- - -]
- # 2 Background long Completed 11 96 - [- - -]
- # 3 Background short Completed 11 95 - [- - -]
- Long (extended) Self Test duration: 4363 seconds [72.7 minutes]
- Background scan results log
- Status: waiting until BMS interval timer expires
- Accumulated power on time, hours:minutes 57252:02 [3435122 minutes]
- Number of background scans performed: 349, scan progress: 0.00%
- Number of background medium scans performed: 0
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 0
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: unknown
- reason: unknown
- negotiated logical link rate: phy enabled; 3 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca0090753b5
- attached SAS address = 0x500304800136f23f
- attached phy identifier = 17
- Invalid DWORD count = 4
- Running disparity error count = 4
- Loss of DWORD synchronization = 2
- Phy reset problem = 0
- relative target port id = 2
- generation code = 0
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: unknown
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca0090753b6
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- -------------------------------------------------
- Disk: da17 (SAS! this disk is not in the scrubbed pool)
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: SEAGATE
- Product: ST31000640SS
- Revision: MS04
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Logical block size: 512 bytes
- Rotation Rate: 7200 rpm
- Logical Unit id: 0x5000c5000d265a2f
- Serial number: 9QJ1MBFN
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Mar 18 19:06:12 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Current Drive Temperature: 35 C
- Drive Trip Temperature: 68 C
- Elements in grown defect list: 5
- Vendor (Seagate) cache information
- Blocks sent to initiator = 2982553045
- Blocks received from initiator = 147387237
- Blocks read from cache and sent to initiator = 3347443498
- Number of read and write commands whose size <= segment size = 1069278896
- Number of read and write commands whose size > segment size = 160745125
- Vendor (Seagate/Hitachi) factory information
- number of hours powered up = 57308.72
- number of minutes until next internal SMART test = 5
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 476754255 911 0 476755166 476755166 148632.388 0
- write: 0 0 0 0 0 70507.022 0
- verify: 1186252916 3246 0 1186256162 1186256162 186210.893 0
- Non-medium error count: 11
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed 2 57260 - [- - -]
- # 2 Background long Completed 2 98 - [- - -]
- # 3 Background short Completed 2 95 - [- - -]
- Long (extended) Self Test duration: 13596 seconds [226.6 minutes]
- Background scan results log
- Status: waiting until BMS interval timer expires
- Accumulated power on time, hours:minutes 57308:44 [3438524 minutes]
- Number of background scans performed: 300, scan progress: 0.00%
- Number of background medium scans performed: 131
- # when lba(hex) [sk,asc,ascq] reassign_status
- 1 39707:21 0000000012beb3d9 [1,17,2] Recovered via rewrite in-place
- 33024 43744:12 0008010003110081 [6,58,2] Reassignment by disk failed
- 33025 45354:46 0040010000000000 [4,e5,8f] Reserved [0x0]
- 33026 0:00 0000000000000000 [0,0,0] Reserved [0x0]
- 33027 49821:49 0008010003110081 [4,6d,4] Reserved [0x0]
- 33028 49908:31 0080010003110081 [0,10,1] Reserved [0x3]
- 33029 50230:17 0080010003110081 [0,b,81] Reserved [0x0]
- 33030 50542:40 0008010003110081 [6,88,1] Reserved [0x0]
- 33031 50926:59 0080010003110081 [e,70,57] Reserved [0x0]
- 33032 52293:18 0008010003110081 [4,6d,4] Reserved [0x0]
- 33033 53425:39 0080010003110081 [2,57,10] Reserved [0x3]
- 33034 53482:07 0008010003110081 [2,96,86] Reserved [0x0]
- 33035 53545:47 0080010003110081 [b,46,4a] Require Write or Reassign Blocks command
- 33036 56849:15 007d010003110081 [2,12,fb] Reserved [0x0]
- 33037 56861:32 0100010003110081 [5,14,5d] Reserved [0x0]
- 33038 56888:24 0066010003110081 [3,11,ef] Reserved [0x0]
- 33039 56895:06 000e010003110081 [3,29,3a] Reserved [0x0]
- 33040 56896:01 0100010003110081 [4,f5,4c] Reserved [0x0]
- 33041 56929:07 0001010003110081 [8,45,86] Reserved [0x0]
- 33042 56952:37 0100010003110081 [9,f4,8e] Reserved [0x0]
- 33043 57019:06 0100010003110081 [e,97,ed] Reserved [0x0]
- 33044 57022:42 0100010003110081 [e,7e,aa] Reserved [0x0]
- 33045 57033:50 0010010003110081 [d,43,8f] Reserved [0x0]
- 33046 57042:02 0008010003110081 [e,ec,cc] Reserved [0x0]
- 33047 57057:20 0100010003110081 [e,da,dc] Reserved [0x0]
- 33048 57062:28 002a010003110081 [e,23,bd] Reserved [0x0]
- 33049 57094:46 0100010003110081 [f,25,89] Reserved [0x0]
- 33050 57096:57 0048010003110081 [0,e4,79] Require Write or Reassign Blocks command
- 33051 57099:26 0100010003110081 [0,22,30] Require Write or Reassign Blocks command
- 33052 57100:53 0010010003110081 [0,44,f5] Require Write or Reassign Blocks command
- 33053 57121:55 0070010003110081 [4,99,20] Require Write or Reassign Blocks command
- 33054 57161:56 0010010003110081 [c,61,7e] Require Write or Reassign Blocks command
- 33055 57166:40 0100010003110081 [c,d2,95] Require Write or Reassign Blocks command
- 33056 57170:10 0100010003110081 [c,78,fa] Require Write or Reassign Blocks command
- 33057 57171:50 0100010003110081 [c,61,7d] Require Write or Reassign Blocks command
- 33058 57187:41 0100010003110081 [c,be,e8] Require Write or Reassign Blocks command
- 33059 57188:40 0100010003110081 [c,32,9f] Require Write or Reassign Blocks command
- 33060 57191:52 006a010003110081 [c,8b,a6] Require Write or Reassign Blocks command
- 33061 57206:28 0100010003110081 [6,71,af] Require Write or Reassign Blocks command
- 33062 57222:38 0034010003110081 [c,90,b4] Require Write or Reassign Blocks command
- 33063 57225:40 0001010003110081 [c,dd,43] Require Write or Reassign Blocks command
- 33064 57227:43 0100010003110081 [6,2,42] Require Write or Reassign Blocks command
- 33065 57230:21 0100010003110081 [c,4a,89] Require Write or Reassign Blocks command
- 33066 57247:02 0100010003110081 [6,5e,b7] Require Write or Reassign Blocks command
- 33067 57247:46 0100010003110081 [c,4a,ca] Require Write or Reassign Blocks command
- 33068 57252:43 0100010003110081 [c,b0,a1] Require Write or Reassign Blocks command
- 33069 57259:38 0008010003110081 [5,15,66] Reserved [0x0]
- 33070 57272:51 00d0010003110081 [4,80,e4] Reserved [0x0]
- 33071 57273:41 0100010003110081 [4,c4,42] Reserved [0x0]
- 33072 57275:39 0008010003110081 [4,9e,3c] Reserved [0x0]
- 33073 57280:25 0100010003110081 [4,a6,1a] Reserved [0x0]
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 0
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: unknown
- reason: unknown
- negotiated logical link rate: phy enabled; 3 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000c5000d265a2d
- attached SAS address = 0x500304800136f23f
- attached phy identifier = 22
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- relative target port id = 2
- generation code = 0
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: unknown
- negotiated logical link rate: phy enabled; 1.5 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000c5000d265a2e
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- --------------------------------------------------------------
- Disk: da18 (SAS! This disk is not in the scrubbed pool)
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p10 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: SEAGATE
- Product: ST1000NM0001
- Revision: PS07
- Compliance: SPC-4
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Logical block size: 512 bytes
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000c5005628c90f
- Serial number: Z1N3R150
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Mar 18 19:06:21 2015 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Current Drive Temperature: 36 C
- Drive Trip Temperature: 68 C
- Manufactured in week 07 of year 2013
- Specified cycle count over device lifetime: 10000
- Accumulated start-stop cycles: 51
- Specified load-unload count over device lifetime: 300000
- Accumulated load-unload cycles: 51
- Elements in grown defect list: 1
- Vendor (Seagate) cache information
- Blocks sent to initiator = 3020001654
- Blocks received from initiator = 30271526
- Blocks read from cache and sent to initiator = 285917026
- Number of read and write commands whose size <= segment size = 48335420
- Number of read and write commands whose size > segment size = 84761
- Vendor (Seagate/Hitachi) factory information
- number of hours powered up = 3279.93
- number of minutes until next internal SMART test = 58
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 906083938 0 0 906083938 0 1546.241 0
- write: 0 0 0 0 0 2233.274 0
- Non-medium error count: 2
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed 32 3231 - [- - -]
- Long (extended) Self Test duration: 11100 seconds [185.0 minutes]
- Background scan results log
- Status: waiting until BMS interval timer expires
- Accumulated power on time, hours:minutes 3279:56 [196796 minutes]
- Number of background scans performed: 27, scan progress: 0.00%
- Number of background medium scans performed: 27
- # when lba(hex) [sk,asc,ascq] reassign_status
- 1 4:32 000000003c3ff33b [1,17,1] Recovered via rewrite in-place
- 2 5:07 000000005266e2d1 [1,17,1] Recovered via rewrite in-place
- 3 2168:04 0000000073d4b6af [1,17,1] Reassigned by app, has valid data
- 4 2168:04 0000000073d4b6b0 [1,17,1] Recovered via rewrite in-place
- 5 2823:25 0000000004962aa1 [1,17,1] Recovered via rewrite in-place
- 6 2824:24 00000000047bd7a2 [1,17,1] Recovered via rewrite in-place
- 7 3093:20 0000000073d4b6af [1,17,1] Successfully reassigned
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 0
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: power on
- negotiated logical link rate: phy enabled; 6 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000c5005628c90d
- attached SAS address = 0x500304800136f23f
- attached phy identifier = 23
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 0
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: unknown
- negotiated logical link rate: phy enabled; 1.5 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000c5005628c90e
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement