API tools faq
paste
Advertisement
Guest User

Drive 4

a guest
Jun 5th, 2016
50
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.05 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.16.0-0.bpo.4-amd64] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Red
  6. Device Model: WDC WD40EFRX-68WT0N0
  7. Serial Number: WD-WCC4E4DACFL6
  8. LU WWN Device Id: 5 0014ee 20c789f75
  9. Firmware Version: 82.00A82
  10. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 9
  14. ATA Standard is: Exact ATA specification draft version not indicated
  15. Local Time is: Sun Jun 5 23:58:51 2016 CDT
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: (52380) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 255) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 5) minutes.
  51. SCT capabilities: (0x703d) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  59. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  60. 3 Spin_Up_Time POS--K 210 210 021 - 6491
  61. 4 Start_Stop_Count -O--CK 100 100 000 - 6
  62. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  63. 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
  64. 9 Power_On_Hours -O--CK 098 096 000 - 2090
  65. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  66. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  67. 12 Power_Cycle_Count -O--CK 100 100 000 - 6
  68. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 3
  69. 193 Load_Cycle_Count -O--CK 199 199 000 - 5025
  70. 194 Temperature_Celsius -O---K 114 095 000 - 38
  71. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  72. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  73. 198 Offline_Uncorrectable ----CK 200 200 000 - 0
  74. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  75. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  76. ||||||_ K auto-keep
  77. |||||__ C event count
  78. ||||___ R error rate
  79. |||____ S speed/performance
  80. ||_____ O updated online
  81. |______ P prefailure warning
  82.  
  83. General Purpose Log Directory Version 1
  84. SMART Log Directory Version 1 [multi-sector log support]
  85. GP/S Log at address 0x00 has 1 sectors [Log Directory]
  86. SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
  87. SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
  88. GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
  89. SMART Log at address 0x06 has 1 sectors [SMART self-test log]
  90. GP Log at address 0x07 has 1 sectors [Extended self-test log]
  91. SMART Log at address 0x09 has 1 sectors [Selective self-test log]
  92. GP Log at address 0x10 has 1 sectors [NCQ Command Error]
  93. GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
  94. GP Log at address 0x21 has 1 sectors [Write stream error log]
  95. GP Log at address 0x22 has 1 sectors [Read stream error log]
  96. GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
  97. GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
  98. GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
  99. GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
  100. GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
  101. GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
  102. GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
  103. GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
  104. GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
  105. GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
  106. GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
  107. GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
  108. GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
  109. GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
  110. GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
  111. GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
  112. GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
  113. GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
  114. GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
  115. GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
  116. GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
  117. GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
  118. GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
  119. GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
  120. GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
  121. GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
  122. GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
  123. GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
  124. GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
  125. GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
  126. GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
  127. GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
  128. GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
  129. GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
  130. GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
  131. GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
  132. GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
  133. GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
  134. GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
  135. GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
  136. GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
  137. GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
  138. GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
  139. GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
  140. GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
  141. GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
  142. GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
  143. GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
  144. GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
  145. GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
  146. GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
  147. GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
  148. GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
  149. GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
  150. GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
  151. GP/S Log at address 0xb7 has 39 sectors [Device vendor specific log]
  152. GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
  153. GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
  154. GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
  155. GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
  156. GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
  157.  
  158. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  159. Device Error Count: 1
  160. CR = Command Register
  161. FEATR = Features Register
  162. COUNT = Count (was: Sector Count) Register
  163. LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
  164. LH = LBA High (was: Cylinder High) Register ] LBA
  165. LM = LBA Mid (was: Cylinder Low) Register ] Register
  166. LL = LBA Low (was: Sector Number) Register ]
  167. DV = Device (was: Device/Head) Register
  168. DC = Device Control Register
  169. ER = Error register
  170. ST = Status register
  171. Powered_Up_Time is measured from power on, and printed as
  172. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  173. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  174.  
  175. Error 1 [0] occurred at disk power-on lifetime: 2090 hours (87 days + 2 hours)
  176. When the command that caused the error occurred, the device was active or idle.
  177.  
  178. After command completion occurred, registers were:
  179. ER -- ST COUNT LBA_48 LH LM LL DV DC
  180. -- -- -- == -- == == == -- -- -- -- --
  181. 04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT
  182.  
  183. Commands leading to the command that caused the error were:
  184. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  185. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  186. b0 00 d5 00 01 00 00 00 c2 4f e1 00 08 7d+01:43:28.926 SMART READ LOG
  187. b0 00 d5 00 01 00 00 00 c2 4f e1 00 08 7d+01:43:28.926 SMART READ LOG
  188. b0 00 d6 00 01 00 00 00 c2 4f e0 00 08 7d+01:43:28.925 SMART WRITE LOG
  189. b0 00 d6 00 01 00 00 00 c2 4f e0 00 08 7d+01:43:28.924 SMART WRITE LOG
  190. b0 00 d5 00 01 00 00 00 c2 4f e0 00 08 7d+01:43:28.924 SMART READ LOG
  191.  
  192. SMART Extended Self-test Log Version: 1 (1 sectors)
  193. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  194.  
  195. SMART Selective self-test log data structure revision number 1
  196. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  197. 1 0 0 Not_testing
  198. 2 0 0 Not_testing
  199. 3 0 0 Not_testing
  200. 4 0 0 Not_testing
  201. 5 0 0 Not_testing
  202. Selective self-test flags (0x0):
  203. After scanning selected spans, do NOT read-scan remainder of disk.
  204. If Selective self-test is pending on power-up, resume after 0 minute delay.
  205.  
  206. SCT Status Version: 3
  207. SCT Version (vendor specific): 258 (0x0102)
  208. SCT Support Level: 1
  209. Device State: Active (0)
  210. Current Temperature: 38 Celsius
  211. Power Cycle Min/Max Temperature: 37/42 Celsius
  212. Lifetime Min/Max Temperature: 21/57 Celsius
  213. Under/Over Temperature Limit Count: 0/0
  214. SCT Temperature History Version: 2
  215. Temperature Sampling Period: 1 minute
  216. Temperature Logging Interval: 1 minute
  217. Min/Max recommended Temperature: 0/60 Celsius
  218. Min/Max Temperature Limit: -41/85 Celsius
  219. Temperature History Size (Index): 478 (198)
  220.  
  221. Index Estimated Time Temperature Celsius
  222. 199 2016-06-05 16:01 38 *******************
  223. ... ..(476 skipped). .. *******************
  224. 198 2016-06-05 23:58 38 *******************
  225.  
  226. SCT Error Recovery Control:
  227. Read: 70 (7.0 seconds)
  228. Write: 70 (7.0 seconds)
  229.  
  230. SATA Phy Event Counters (GP Log 0x11)
  231. ID Size Value Description
  232. 0x0001 2 0 Command failed due to ICRC error
  233. 0x0002 2 0 R_ERR response for data FIS
  234. 0x0003 2 0 R_ERR response for device-to-host data FIS
  235. 0x0004 2 0 R_ERR response for host-to-device data FIS
  236. 0x0005 2 0 R_ERR response for non-data FIS
  237. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  238. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  239. 0x0008 2 0 Device-to-host non-data FIS retries
  240. 0x0009 2 22 Transition from drive PhyRdy to drive PhyNRdy
  241. 0x000a 2 20 Device-to-host register FISes sent due to a COMRESET
  242. 0x000b 2 0 CRC errors within host-to-device FIS
  243. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  244. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  245. 0x8000 4 611010 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!