API tools faq
paste
Advertisement
pklaus

iw list: TP-Link WDR4900 running fresh OpenWrt trunk r36828

pklaus
Jun 5th, 2013
373
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.07 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# iw list
  2. Wiphy phy1
  3. max # scan SSIDs: 4
  4. max scan IEs length: 2257 bytes
  5. Coverage class: 0 (up to 0m)
  6. Device supports RSN-IBSS.
  7. Supported Ciphers:
  8. * WEP40 (00-0f-ac:1)
  9. * WEP104 (00-0f-ac:5)
  10. * TKIP (00-0f-ac:2)
  11. * CCMP (00-0f-ac:4)
  12. * CMAC (00-0f-ac:6)
  13. Available Antennas: TX 0x7 RX 0x7
  14. Configured Antennas: TX 0x7 RX 0x7
  15. Supported interface modes:
  16. * IBSS
  17. * managed
  18. * AP
  19. * AP/VLAN
  20. * WDS
  21. * monitor
  22. * mesh point
  23. * P2P-client
  24. * P2P-GO
  25. Band 1:
  26. Capabilities: 0x11ef
  27. RX LDPC
  28. HT20/HT40
  29. SM Power Save disabled
  30. RX HT20 SGI
  31. RX HT40 SGI
  32. TX STBC
  33. RX STBC 1-stream
  34. Max AMSDU length: 3839 bytes
  35. DSSS/CCK HT40
  36. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  37. Minimum RX AMPDU time spacing: 8 usec (0x06)
  38. HT TX/RX MCS rate indexes supported: 0-23
  39. Bitrates (non-HT):
  40. * 1.0 Mbps
  41. * 2.0 Mbps (short preamble supported)
  42. * 5.5 Mbps (short preamble supported)
  43. * 11.0 Mbps (short preamble supported)
  44. * 6.0 Mbps
  45. * 9.0 Mbps
  46. * 12.0 Mbps
  47. * 18.0 Mbps
  48. * 24.0 Mbps
  49. * 36.0 Mbps
  50. * 48.0 Mbps
  51. * 54.0 Mbps
  52. Frequencies:
  53. * 2412 MHz [1] (27.0 dBm)
  54. * 2417 MHz [2] (27.0 dBm)
  55. * 2422 MHz [3] (27.0 dBm)
  56. * 2427 MHz [4] (27.0 dBm)
  57. * 2432 MHz [5] (27.0 dBm)
  58. * 2437 MHz [6] (27.0 dBm)
  59. * 2442 MHz [7] (27.0 dBm)
  60. * 2447 MHz [8] (27.0 dBm)
  61. * 2452 MHz [9] (27.0 dBm)
  62. * 2457 MHz [10] (27.0 dBm)
  63. * 2462 MHz [11] (27.0 dBm)
  64. * 2467 MHz [12] (disabled)
  65. * 2472 MHz [13] (disabled)
  66. * 2484 MHz [14] (disabled)
  67. Supported commands:
  68. * new_interface
  69. * set_interface
  70. * new_key
  71. * start_ap
  72. * new_station
  73. * new_mpath
  74. * set_mesh_config
  75. * set_bss
  76. * authenticate
  77. * associate
  78. * deauthenticate
  79. * disassociate
  80. * join_ibss
  81. * join_mesh
  82. * remain_on_channel
  83. * set_tx_bitrate_mask
  84. * frame
  85. * frame_wait_cancel
  86. * set_wiphy_netns
  87. * set_channel
  88. * set_wds_peer
  89. * tdls_mgmt
  90. * tdls_oper
  91. * probe_client
  92. * set_noack_map
  93. * register_beacons
  94. * start_p2p_device
  95. * Unknown command (92)
  96. * connect
  97. * disconnect
  98. Supported TX frame types:
  99. * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  100. * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  101. * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  102. * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  103. * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  104. * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  105. * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  106. * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  107. Supported RX frame types:
  108. * IBSS: 0x40 0xb0 0xc0 0xd0
  109. * managed: 0x40 0xd0
  110. * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  111. * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  112. * mesh point: 0xb0 0xc0 0xd0
  113. * P2P-client: 0x40 0xd0
  114. * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  115. * P2P-device: 0x40 0xd0
  116. software interface modes (can always be added):
  117. * AP/VLAN
  118. * monitor
  119. valid interface combinations:
  120. * #{ managed, WDS, P2P-client } <= 2048, #{ AP, mesh point, P2P-GO } <= 8, #{ IBSS } <= 1,
  121. total <= 2048, #channels <= 1, STA/AP BI must match
  122. * #{ AP } <= 1,
  123. total <= 1, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz }
  124.  
  125. HT Capability overrides:
  126. * MCS: ff ff ff ff ff ff ff ff ff ff
  127. * maximum A-MSDU length
  128. * supported channel width
  129. * short GI for 40 MHz
  130. * max A-MPDU length exponent
  131. * min MPDU start spacing
  132. Device supports TX status socket option.
  133. Device supports HT-IBSS.
  134. Device supports low priority scan.
  135. Device supports scan flush.
  136. Device supports AP scan.
  137. Wiphy phy0
  138. max # scan SSIDs: 4
  139. max scan IEs length: 2261 bytes
  140. Coverage class: 0 (up to 0m)
  141. Device supports RSN-IBSS.
  142. Supported Ciphers:
  143. * WEP40 (00-0f-ac:1)
  144. * WEP104 (00-0f-ac:5)
  145. * TKIP (00-0f-ac:2)
  146. * CCMP (00-0f-ac:4)
  147. * CMAC (00-0f-ac:6)
  148. Available Antennas: TX 0x7 RX 0x7
  149. Configured Antennas: TX 0x7 RX 0x7
  150. Supported interface modes:
  151. * IBSS
  152. * managed
  153. * AP
  154. * AP/VLAN
  155. * WDS
  156. * monitor
  157. * mesh point
  158. * P2P-client
  159. * P2P-GO
  160. Band 2:
  161. Capabilities: 0x11ef
  162. RX LDPC
  163. HT20/HT40
  164. SM Power Save disabled
  165. RX HT20 SGI
  166. RX HT40 SGI
  167. TX STBC
  168. RX STBC 1-stream
  169. Max AMSDU length: 3839 bytes
  170. DSSS/CCK HT40
  171. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  172. Minimum RX AMPDU time spacing: 8 usec (0x06)
  173. HT TX/RX MCS rate indexes supported: 0-23
  174. Bitrates (non-HT):
  175. * 6.0 Mbps
  176. * 9.0 Mbps
  177. * 12.0 Mbps
  178. * 18.0 Mbps
  179. * 24.0 Mbps
  180. * 36.0 Mbps
  181. * 48.0 Mbps
  182. * 54.0 Mbps
  183. Frequencies:
  184. * 5180 MHz [36] (17.0 dBm)
  185. * 5200 MHz [40] (17.0 dBm)
  186. * 5220 MHz [44] (17.0 dBm)
  187. * 5240 MHz [48] (17.0 dBm)
  188. * 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  189. DFS state: usable (for 2747 sec)
  190. * 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  191. DFS state: usable (for 2747 sec)
  192. * 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  193. DFS state: usable (for 2747 sec)
  194. * 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  195. DFS state: usable (for 2747 sec)
  196. * 5500 MHz [100] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  197. DFS state: usable (for 2747 sec)
  198. * 5520 MHz [104] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  199. DFS state: usable (for 2747 sec)
  200. * 5540 MHz [108] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  201. DFS state: usable (for 2747 sec)
  202. * 5560 MHz [112] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  203. DFS state: usable (for 2747 sec)
  204. * 5580 MHz [116] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  205. DFS state: usable (for 2747 sec)
  206. * 5600 MHz [120] (disabled)
  207. * 5620 MHz [124] (disabled)
  208. * 5640 MHz [128] (disabled)
  209. * 5660 MHz [132] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  210. DFS state: usable (for 2747 sec)
  211. * 5680 MHz [136] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  212. DFS state: usable (for 2747 sec)
  213. * 5700 MHz [140] (20.0 dBm) (passive scanning, no IBSS, radar detection)
  214. DFS state: usable (for 2747 sec)
  215. * 5745 MHz [149] (30.0 dBm)
  216. * 5765 MHz [153] (30.0 dBm)
  217. * 5785 MHz [157] (30.0 dBm)
  218. * 5805 MHz [161] (30.0 dBm)
  219. * 5825 MHz [165] (30.0 dBm)
  220. Supported commands:
  221. * new_interface
  222. * set_interface
  223. * new_key
  224. * start_ap
  225. * new_station
  226. * new_mpath
  227. * set_mesh_config
  228. * set_bss
  229. * authenticate
  230. * associate
  231. * deauthenticate
  232. * disassociate
  233. * join_ibss
  234. * join_mesh
  235. * remain_on_channel
  236. * set_tx_bitrate_mask
  237. * frame
  238. * frame_wait_cancel
  239. * set_wiphy_netns
  240. * set_channel
  241. * set_wds_peer
  242. * tdls_mgmt
  243. * tdls_oper
  244. * probe_client
  245. * set_noack_map
  246. * register_beacons
  247. * start_p2p_device
  248. * Unknown command (92)
  249. * connect
  250. * disconnect
  251. Supported TX frame types:
  252. * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  253. * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  254. * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  255. * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  256. * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  257. * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  258. * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  259. * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  260. Supported RX frame types:
  261. * IBSS: 0x40 0xb0 0xc0 0xd0
  262. * managed: 0x40 0xd0
  263. * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  264. * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  265. * mesh point: 0xb0 0xc0 0xd0
  266. * P2P-client: 0x40 0xd0
  267. * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  268. * P2P-device: 0x40 0xd0
  269. software interface modes (can always be added):
  270. * AP/VLAN
  271. * monitor
  272. valid interface combinations:
  273. * #{ managed, WDS, P2P-client } <= 2048, #{ AP, mesh point, P2P-GO } <= 8, #{ IBSS } <= 1,
  274. total <= 2048, #channels <= 1, STA/AP BI must match
  275. * #{ AP } <= 1,
  276. total <= 1, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz }
  277.  
  278. HT Capability overrides:
  279. * MCS: ff ff ff ff ff ff ff ff ff ff
  280. * maximum A-MSDU length
  281. * supported channel width
  282. * short GI for 40 MHz
  283. * max A-MPDU length exponent
  284. * min MPDU start spacing
  285. Device supports TX status socket option.
  286. Device supports HT-IBSS.
  287. Device supports low priority scan.
  288. Device supports scan flush.
  289. Device supports AP scan.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!