U-Boot SPL 2017.03-rc2-00002-g11d4fd24f9 (Feb 15 2017 - 16:42:40)
Trying to boot from MMC1


U-Boot 2017.03-rc2-00002-g11d4fd24f9 (Feb 15 2017 - 16:42:40 -0600), Build: jenkins-github_Bootloader-Builder-520

CPU  : AM335X-GP rev 2.1
I2C:   ready
DRAM:  512 MiB
Reset Source: Global external warm reset has occurred.
Reset Source: Global warm SW reset has occurred.
Reset Source: Power-on reset has occurred.
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
Model: SeeedStudio BeagleBone Green Wireless:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: found invalid cape eeprom: i2c_probe: 0x57:
Net:   eth0: MII MODE
Could not get PHY for cpsw: addr 0
cpsw
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[GW1A] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
** Bad device 0:2 0x82000000 **
** Bad device 0:2 0x82000000 **
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
1302 bytes read in 7 ms (181.6 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from /uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd ...
2010 bytes read in 38 ms (50.8 KiB/s)
debug: [/boot/vmlinuz-4.4.49-ti-r89] ...
8651944 bytes read in 578 ms (14.3 MiB/s)
debug: [/boot/initrd.img-4.4.49-ti-r89] ...
5256410 bytes read in 362 ms (13.8 MiB/s)
debug: [/boot/dtbs/4.4.49-ti-r89/am335x-bonegreen-wireless.dtb] ...
55598 bytes read in 51 ms (1 MiB/s)
debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable] ...
debug: [bootz 0x82000000 0x88080000:5034da 0x88000000] ...
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Using Device Tree in place at 88000000, end 8801092d

Starting kernel ...

[    0.001019] clocksource_probe: no matching clocksources found
[    2.068714] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    2.312130] omap_voltage_late_init: Voltage driver support not added
[    2.327884] PM: Cannot get wkup_m3_ipc handle
[    2.574830] bone_capemgr bone_capemgr: slot #0: No cape found
[    2.626431] bone_capemgr bone_capemgr: slot #1: No cape found
[    2.678235] bone_capemgr bone_capemgr: slot #2: No cape found
[    2.716578] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 3
[    2.723782] bone_capemgr bone_capemgr: slot #3: No cape found
Loading, please wait...
[    5.107203] mmc2: error -16 whilst initialising SDIO card
rootfs: recovering journal
rootfs: clean, 84270/217728 files, 440732/869376 blocks
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Found device /dev/ttyGS0.
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[FAILED] Failed to start Raise network interfaces.
See 'systemctl status networking.service' for details.
[  OK  ] Reached target Network.
         Starting Permit User Sessions...
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Reached target Network is Online.
         Starting /etc/rc.local Compatibility...
         Starting LSB: Advanced IEEE 802.11 management daemon...
         Starting LSB: Apache2 web server...
 [0;32m  OK  ] Started Permit User Sessions.
e[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started LSB: Advanced IEEE 802.11 management daemon.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Serial Getty on ttyGS0.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Generic Board Startup.
         Starting BB WL18xx Bluetooth Service...
[  OK  ] Started LSB: Apache2 web server.
         Starting Load/Save RF Kill Switch Status...
         Starting Bluetooth service...
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Bluetooth service.
[  OK  ] Reached target Bluetooth.

Debian GNU/Linux 8 beaglebone ttyS0

BeagleBoard.org Debian Image 2017-02-19

Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian

default username:password is [debian:temppwd]

beaglebone login: debian
Password:
Last login: Wed Feb 22 17:10:46 UTC 2017 from 192.168.7.1 on pts/0
Linux beaglebone 4.4.49-ti-r89 #1 SMP Fri Feb 17 20:59:06 UTC 2017 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicabcat /sys/devices/platform/bone_capemgr/slots
 0: PF----  -1
 1: PF----  -1
 2: PF----  -1
 3: PF----  -1