Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Booting Linux on physical CPU 0
- <6>[ 0.000000] Initializing cgroup subsys cpuset
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.3.0 (csj@broncho) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #4 SMP PREEMPT Thu Apr 17 17:25:55 CST 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: sun6i
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <7>[ 0.000000] On node 0 totalpages: 194560
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0814d80, node_mem_map d3900000
- <7>[ 0.000000] DMA zone: 576 pages used for memmap
- <7>[ 0.000000] DMA zone: 0 pages reserved
- <7>[ 0.000000] DMA zone: 64960 pages, LIFO batch:15
- <7>[ 0.000000] Normal zone: 1134 pages used for memmap
- <7>[ 0.000000] Normal zone: 60306 pages, LIFO batch:15
- <7>[ 0.000000] HighMem zone: 594 pages used for memmap
- <7>[ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
- <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @d4208000 s10176 r8192 d14400 u32768
- <7>[ 0.000000] pcpu-alloc: s10176 r8192 d14400 u32768 alloc=8*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 192256
- <5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=4 ion_reserve=96M
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 49MB 711MB = 760MB total
- <5>[ 0.000000] Memory: 757980k/757980k available, 290596k reserved, 270336K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc0783000 (7660 kB)
- <5>[ 0.000000] .init : 0xc0783000 - 0xc07ca7c0 ( 286 kB)
- <5>[ 0.000000] .data : 0xc07cc000 - 0xc0821c38 ( 344 kB)
- <5>[ 0.000000] .bss : 0xc0821c5c - 0xc099e190 (1522 kB)
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:160
- <4>[ 0.000000] [aw_delay]: It is use use_time_delay function!
- <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- <6>[ 0.000000] Architected local timer running at 24.00MHz.
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000433] Calibrating delay loop... 2013.59 BogoMIPS (lpj=10067968)
- <6>[ 0.059959] pid_max: default: 32768 minimum: 301
- <6>[ 0.060310] Mount-cache hash table entries: 512
- <6>[ 0.061025] CPU: Testing write buffer coherency: ok
- <6>[ 0.061071] ftrace: allocating 20638 entries in 61 pages
- <6>[ 0.096730] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- <6>[ 0.096809] Setting up static identity map for 0x4058b8b8 - 0x4058b910
- <4>[ 0.223507] CPU1: Booted secondary processor
- <6>[ 0.277065] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- <4>[ 0.343503] CPU2: Booted secondary processor
- <6>[ 0.397224] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- <4>[ 0.463623] CPU3: Booted secondary processor
- <6>[ 0.517384] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- <6>[ 0.517471] Brought up 4 CPUs
- <6>[ 0.517484] SMP: Total of 4 processors activated (8054.37 BogoMIPS).
- <6>[ 0.518486] devtmpfs: initialized
- <4>[ 0.523867] script_init enter!
- <4>[ 0.524590] script_init exit!
- <6>[ 0.526210] print_constraints: dummy:
- <3>[ 0.526409] cpufreq_core_init: broncho_invented script_get_item err.
- <3>[ 0.526423] cpufreq_core_init: broncho_invented script_get_item err.
- <3>[ 0.526435] cpufreq_core_init: broncho_invented script_get_item err.
- <6>[ 0.526732] NET: Registered protocol family 16
- <7>[ 0.526935] sunxi_dump_init success
- <6>[ 0.527208] script_sysfs_init success
- <6>[ 0.531815] gpiochip_add: registered GPIOs 0 to 27 on device: GPA
- <6>[ 0.532027] gpiochip_add: registered GPIOs 30 to 37 on device: GPB
- <6>[ 0.532226] gpiochip_add: registered GPIOs 40 to 67 on device: GPC
- <6>[ 0.532433] gpiochip_add: registered GPIOs 70 to 97 on device: GPD
- <6>[ 0.532649] gpiochip_add: registered GPIOs 100 to 116 on device: GPE
- <6>[ 0.532847] gpiochip_add: registered GPIOs 119 to 124 on device: GPF
- <6>[ 0.533052] gpiochip_add: registered GPIOs 127 to 145 on device: GPG
- <6>[ 0.533248] gpiochip_add: registered GPIOs 148 to 178 on device: GPH
- <6>[ 0.533444] gpiochip_add: registered GPIOs 181 to 189 on device: GPL
- <6>[ 0.533659] gpiochip_add: registered GPIOs 192 to 199 on device: GPM
- <4>[ 0.534096] sun6i ar100 driver v1.00
- <4>[ 0.542845] move ar100 binary data [addr = c00357e0, len = 13000] to sram_a2 finished
- <6>[ 0.984590] bio: create slab <bio-0> at 0
- <5>[ 0.986467] SCSI subsystem initialized
- <6>[ 0.987253] usbcore: registered new interface driver usbfs
- <6>[ 0.987548] usbcore: registered new interface driver hub
- <6>[ 0.987824] usbcore: registered new device driver usb
- <6>[ 0.991407] axp_mfd 1-0034: AXP (CHIP ID: 0x17) detected
- <6>[ 0.996368] print_constraints: axp22_ldo1: 3000 mV
- <4>[ 0.996755] suspend_set_state: axp22_ldo2: No configuration
- <6>[ 0.996813] print_constraints: axp22_ldo2: 700 <--> 3300 mV at 700 mV
- <6>[ 0.997320] print_constraints: axp22_ldo3: 700 <--> 3300 mV at 1800 mV
- <6>[ 0.997851] print_constraints: axp22_ldo4: 700 <--> 3300 mV at 3000 mV
- <4>[ 0.998272] suspend_set_state: axp22_ldo5: No configuration
- <6>[ 0.998329] print_constraints: axp22_ldo5: 700 <--> 3300 mV at 3300 mV
- <4>[ 0.998707] suspend_set_state: axp22_ldo6: No configuration
- <6>[ 0.998764] print_constraints: axp22_ldo6: 700 <--> 3300 mV at 700 mV
- <4>[ 0.999139] suspend_set_state: axp22_ldo7: No configuration
- <6>[ 0.999196] print_constraints: axp22_ldo7: 700 <--> 3300 mV at 2800 mV
- <4>[ 0.999588] suspend_set_state: axp22_ldo8: No configuration
- <6>[ 0.999646] print_constraints: axp22_ldo8: 700 <--> 3300 mV at 700 mV
- <4>[ 1.000034] suspend_set_state: axp22_ldo9: No configuration
- <6>[ 1.000091] print_constraints: axp22_ldo9: 700 <--> 3300 mV at 700 mV
- <4>[ 1.000468] suspend_set_state: axp22_ldo10: No configuration
- <6>[ 1.000525] print_constraints: axp22_ldo10: 700 <--> 3300 mV at 1800 mV
- <4>[ 1.000912] suspend_set_state: axp22_ldo11: No configuration
- <6>[ 1.000969] print_constraints: axp22_ldo11: 700 <--> 3300 mV at 700 mV
- <6>[ 1.001500] print_constraints: axp22_ldo12: 700 <--> 1400 mV at 1100 mV
- <6>[ 1.002007] print_constraints: axp22_DCDC1: 1600 <--> 3400 mV at 3000 mV
- <6>[ 1.002548] print_constraints: axp22_DCDC2: 600 <--> 1540 mV at 1200 mV
- <6>[ 1.003072] print_constraints: axp22_DCDC3: 600 <--> 1860 mV at 1260 mV
- <6>[ 1.003584] print_constraints: axp22_DCDC4: 600 <--> 1540 mV at 1240 mV
- <6>[ 1.004095] print_constraints: axp22_DCDC5: 1000 <--> 2550 mV at 1500 mV
- <6>[ 1.004525] print_constraints: axp22_ldoio0: 700 <--> 3300 mV at 2800 mV
- <6>[ 1.004957] print_constraints: axp22_ldoio1: 700 <--> 3300 mV at 3000 mV
- <6>[ 1.005624] input: axp22-supplyer as /devices/platform/sun6i-i2c.1/i2c-1/1-0034/axp22-supplyer.19/input/input0
- <4>[ 1.005639] axp charger not limit now
- <4>[ 1.009204] now_rest_vol = 21
- <6>[ 1.009955] gpiochip_add: registered GPIOs 202 to 206 on device: axp_pin
- <6>[ 1.010891] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 1.011992] Bluetooth: Core ver 2.16
- <6>[ 1.012148] NET: Registered protocol family 31
- <6>[ 1.012159] Bluetooth: HCI device and connection manager initialized
- <6>[ 1.012176] Bluetooth: HCI socket layer initialized
- <6>[ 1.012187] Bluetooth: L2CAP socket layer initialized
- <6>[ 1.012222] Bluetooth: SCO socket layer initialized
- <6>[ 1.012698] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 1.013279] Switching to clocksource arch_sys_counter
- <5>[ 1.031212] FS-Cache: Loaded
- <6>[ 1.031708] CacheFiles: Loaded
- <6>[ 1.051844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 1.052069] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- <4>[ 1.052247] [usb_manager]: CONFIG_USB_SW_SUN6I_USB0_OTG
- <4>[ 1.052276] [sun6i_usb]: ERR: get usbc(0) det_vbus gpio failed
- <4>[ 1.052818] [sw_udc]: udc_init: version 20080411
- <6>[ 1.053801] NET: Registered protocol family 2
- <6>[ 1.054084] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 1.054838] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 1.055821] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- <6>[ 1.056747] TCP: Hash tables configured (established 65536 bind 65536)
- <6>[ 1.056760] TCP reno registered
- <6>[ 1.056774] UDP hash table entries: 256 (order: 1, 8192 bytes)
- <6>[ 1.056801] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- <6>[ 1.057161] NET: Registered protocol family 1
- <6>[ 1.057739] RPC: Registered named UNIX socket transport module.
- <6>[ 1.057750] RPC: Registered udp transport module.
- <6>[ 1.057759] RPC: Registered tcp transport module.
- <6>[ 1.057768] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 1.058014] Unpacking initramfs...
- <6>[ 1.114217] Freeing initrd memory: 536K
- <6>[ 1.114234] sunxi_reg_init enter
- <4>[ 1.114995] [pm]aw_pm_init!
- <6>[ 1.115007] standby_mode = 1.
- <6>[ 1.115016] cpu0_en = 0.
- <6>[ 1.115025] dram_selfresh_en = 1.
- <6>[ 1.115033] wakeup src cnt is : 1.
- <4>[ 1.115046] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
- <4>[ 1.115057] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x20
- <4>[ 1.115068] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
- <6>[ 1.115079] cpus need care gpio: mem_para_info.cpus_gpio_wakeup = 0x0.
- <4>[ 1.115099] [wifi]: select wifi: rtl8188eu !!
- <4>[ 1.115459] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
- <4>[ 1.115474] [rtl8188eu]: module power name axp22_dldo1
- <4>[ 1.115484] [rtl8188eu]: rtl8188eu module power set by axp.
- <4>[ 1.115571] [rtl8188eu]: first time
- <4>[ 1.115738] [wifi_pm]: wifi gpio init is OK !!
- <4>[ 1.117320] highmem bounce pool size: 64 pages
- <6>[ 1.120943] NTFS driver 2.1.30 [Flags: R/W].
- <6>[ 1.121416] fuse init (API version 7.18)
- <6>[ 1.122472] msgmni has been set to 953
- <6>[ 1.123524] io scheduler noop registered
- <6>[ 1.123536] io scheduler deadline registered (default)
- <4>[ 1.132324] [uart]: driver initializied
- <6>[ 1.132820] sw_serial.0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SW
- <4>[ 1.132847] [uart]: console setup baud 115200 parity n bits 8, flow n
- <6>[ 1.154955] console [ttyS0] enabled
- <6>[ 1.163202] loop: module loaded
- <3>[ 1.163241] sun6i_vibrator_init motor is not used in config
- <6>[ 1.169510] sunxi_hw_init: sunxi debug register driver init
- <4>[ 1.169811] =======================================modem_init===============
- <4>[ 1.169829] 3g function is not enable!
- <3>[ 1.169853] hwinfo_init: hwinfo num script_get_item err.
- <6>[ 1.176603] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.176616] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 1.176929] PPP generic driver version 2.4.2
- <6>[ 1.177342] PPP BSD Compression module registered
- <6>[ 1.177356] PPP Deflate Compression module registered
- <6>[ 1.177963] PPP MPPE Compression module registered
- <6>[ 1.177981] NET: Registered protocol family 24
- <6>[ 1.178026] PPTP driver version 0.8.5
- <6>[ 1.178558] usbcore: registered new interface driver cdc_ether
- <6>[ 1.178733] usbcore: registered new interface driver cdc_eem
- <6>[ 1.178903] usbcore: registered new interface driver cdc_subset
- <4>[ 1.178984] [sw_hci_sun6i]: ERR: get usb_restrict_flag failed
- <4>[ 1.179041] [sw_hci_sun6i]: ERR: get usb_restrict_flag failed
- <4>[ 1.179098] [sw_hci_sun6i]: ERR: sw-ehci2(restrict_gpio) is invalid
- <4>[ 1.179113] [sw_hci_sun6i]: ERR: sw-ehci2(drv vbus) is invalid
- <4>[ 1.179128] [sw_hci_sun6i]: ERR: get usb_restrict_flag failed
- <4>[ 1.179166] [sw_hci_sun6i]: ERR: sw-ohci2(restrict_gpio) is invalid
- <4>[ 1.179180] [sw_hci_sun6i]: ERR: sw-ohci2(drv vbus) is invalid
- <4>[ 1.179195] [sw_hci_sun6i]: ERR: get usb_restrict_flag failed
- <4>[ 1.179482] [sw_hci_sun6i]: [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc0892b24
- <4>[ 1.179510] [sw_hci_sun6i]: [sw-ehci1]: open clock
- <4>[ 1.179741] [sw_hci_sun6i]: [sw-ehci1]: Set USB Power ON
- <6>[ 1.179760] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 1.179804] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
- <6>[ 1.179920] sw-ehci sw-ehci.1: irq 104, io mem 0xf1c1a000
- <6>[ 1.193759] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
- <6>[ 1.194729] hub 1-0:1.0: USB hub found
- <6>[ 1.194760] hub 1-0:1.0: 1 port detected
- <4>[ 1.195311] [sw_hci_sun6i]: [sw-ehci1]: sw_usb_disable_ehci
- <4>[ 1.195328] [sw_hci_sun6i]: [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc0892b24
- <6>[ 1.195346] sw-ehci sw-ehci.1: remove, state 1
- <6>[ 1.195370] usb usb1: USB disconnect, device number 1
- <6>[ 1.196995] sw-ehci sw-ehci.1: USB bus 1 deregistered
- <4>[ 1.197019] [sw_hci_sun6i]: [sw-ehci1]: Set USB Power OFF
- <4>[ 1.197036] [sw_hci_sun6i]: [sw-ehci1]: close clock
- <4>[ 1.197063] [sw_hci_sun6i]: ERR: usb1 sw-ohci1 is not enable
- <4>[ 1.197076] [sw_hci_sun6i]: ERR: usb2 sw-ehci2 is not enable
- <4>[ 1.197089] [sw_hci_sun6i]: ERR: usb2 sw-ohci2 is not enable
- <4>[ 1.197102] [sw_hci_sun6i]: ERR: usb0 is not enable
- <6>[ 1.197114] Initializing USB Mass Storage driver...
- <6>[ 1.197307] usbcore: registered new interface driver usb-storage
- <6>[ 1.197321] USB Mass Storage support registered.
- <6>[ 1.197489] usbcore: registered new interface driver ums-alauda
- <6>[ 1.197653] usbcore: registered new interface driver ums-cypress
- <6>[ 1.197814] usbcore: registered new interface driver ums-datafab
- <6>[ 1.197981] usbcore: registered new interface driver ums_eneub6250
- <6>[ 1.198143] usbcore: registered new interface driver ums-freecom
- <6>[ 1.198305] usbcore: registered new interface driver ums-isd200
- <6>[ 1.198469] usbcore: registered new interface driver ums-jumpshot
- <6>[ 1.198630] usbcore: registered new interface driver ums-karma
- <6>[ 1.198793] usbcore: registered new interface driver ums-onetouch
- <6>[ 1.198970] usbcore: registered new interface driver ums-realtek
- <6>[ 1.199132] usbcore: registered new interface driver ums-sddr09
- <6>[ 1.199293] usbcore: registered new interface driver ums-sddr55
- <6>[ 1.199455] usbcore: registered new interface driver ums-usbat
- <6>[ 1.199819] usbcore: registered new interface driver usbserial
- <6>[ 1.199833] usbserial: USB Serial Driver core
- <6>[ 1.199987] USB Serial support registered for GSM modem (1-port)
- <6>[ 1.200162] usbcore: registered new interface driver option
- <6>[ 1.200175] option: v0.7.2:USB Driver for GSM modems
- <4>[ 1.200650] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
- <4>[ 1.200671] [sw_udc]: alloc request: ep(0xc07fdd98, ep0, 64), req(0xee80a440)
- <4>[ 1.200686] [sun6i_usb]: ERR: usb device is not active
- <4>[ 1.200701] [sw_udc]: sw_udc_pullup, is_on = 0
- <4>[ 1.200712] [sun6i_usb]: usb device is not active
- <6>[ 1.203838] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 1.203855] android_usb gadget: Number of LUNs=2
- <6>[ 1.203870] lun0: LUN: removable file: (no medium)
- <6>[ 1.203884] lun1: LUN: removable file: (no medium)
- <4>[ 1.204401] [sun6i_usb]: ERR: usb device is not active
- <6>[ 1.204424] android_usb gadget: android_usb ready
- <4>[ 1.204551] [sw_hcd0]: usb host driver initialize........
- <4>[ 1.204680] [sw_hcd0]: open_usb_clock
- <4>[ 1.205145] [sun6i_usb]: [sw_hcd0]: host_init_state = 0
- <4>[ 1.205158] [sw_hcd0]: platform is usb host
- <4>[ 1.205226] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c19000 using PIO, IRQ 103
- <6>[ 1.205245] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- <6>[ 1.205264] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- <6>[ 1.206170] hub 1-0:1.0: USB hub found
- <6>[ 1.206199] hub 1-0:1.0: 1 port detected
- <4>[ 1.206760] [sw_hcd0]: sw_usb_host0_disable start
- <4>[ 1.206774] [sw_hcd0]: sw_hcd_wait_for_disconnect cnt=0
- <4>[ 1.206788] [sun6i_usb]: [sw_hcd_host0]: Set USB Power OFF
- <4>[ 1.206928] [sun6i_usb]: -------sw_hcd0_soft_disconnect---------
- <4>[ 1.206942] [sun6i_usb]: wrn: hcd is not enable, need not stop hcd
- <4>[ 1.206972] [sw_hcd0]: close_usb_clock
- <4>[ 1.206989] [sw_hcd0]: sw_usb_host0_disable end
- <6>[ 1.207720] mousedev: PS/2 mouse device common for all mice
- <6>[ 1.208488] =====ctp_fetch_sysconfig_para=====.
- <3>[ 1.208509] ctp_fetch_sysconfig_para: ctp_firm script_get_item err.
- <6>[ 1.216599] sun6i-rtc sun6i-rtc: sun6i_rtc_probe tmp_data = 380239881
- <6>[ 1.216675] sun6i-rtc sun6i-rtc: sun6i_rtc_gettime
- <6>[ 1.216691] sun6i-rtc sun6i-rtc: read time 2014-12-19 13:53:20
- <6>[ 1.217236] using rtc device, rtc, for alarms
- <6>[ 1.217277] sun6i-rtc sun6i-rtc: rtc core: registered rtc as rtc0
- <6>[ 1.217442] Linux video capture interface: v2.00
- <4>[ 1.217584] [cedar]: install start!!!
- <4>[ 1.218504] [cedar]: install end!!!
- <4>[ 1.227436] create_regulator: axp22_ldoio1: Failed to create debugfs directory
- <6>[ 1.228458] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- <6>[ 1.229015] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.229032] Bluetooth: HCI H4 protocol initialized
- <6>[ 1.229044] Bluetooth: HCI BCSP protocol initialized
- <6>[ 1.229058] Bluetooth: HCI Realtek H5 protocol initialized
- <4>[ 1.230643] [mmc]: sw_mci_init
- <4>[ 1.230678] [mmc]: get mmc0's sdc_mod_clk failed
- <4>[ 1.230702] [mmc]: MMC host used card: 0x1, boot card: 0x0, io_card 0
- <4>[ 1.236769] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- <4>[ 1.237851] [mmc]: sdc0 Probe: base:0xf0036000 irq:92 sg_cpu:ffdff000(42c00000) ret 0.
- <6>[ 1.240961] usbcore: registered new interface driver usbhid
- <6>[ 1.240976] usbhid: USB HID core driver
- <6>[ 1.242038] ashmem: initialized
- <6>[ 1.242350] logger: created 256K log 'log_main'
- <6>[ 1.242646] logger: created 256K log 'log_events'
- <6>[ 1.242953] logger: created 256K log 'log_radio'
- <6>[ 1.243262] logger: created 256K log 'log_system'
- <4>[ 1.244274] [audiocodec] headset detect invert type err!
- <6>[ 1.244672] input: headset as /devices/virtual/input/input1
- <3>[ 1.245696] BTHWCTL: wifi_mod_sel= 6, is not mt6622 module!!
- <4>[ 1.254063] enter sun6i Audio codec!!!
- <6>[ 1.255646] sun6i audio support initialized
- <4>[ 1.255855] sun6i Audio codec init end
- <6>[ 1.258472] asoc: sndhdmi <-> sun6i-hdmiaudio.0 mapping ok
- <6>[ 1.259647] ALSA device list:
- <6>[ 1.259661] #0: sun6i-CODEC Audio Codec
- <6>[ 1.259674] #1: sndhdmi
- <6>[ 1.259946] Netfilter messages via NETLINK v0.30.
- <6>[ 1.260049] nf_conntrack version 0.5.0 (11851 buckets, 47404 max)
- <6>[ 1.260580] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.260614] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 1.260629] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 1.261576] xt_time: kernel timezone is -0000
- <6>[ 1.261623] IPv4 over IPv4 tunneling driver
- <6>[ 1.262550] GRE over IPv4 demultiplexor driver
- <6>[ 1.262566] GRE over IPv4 tunneling driver
- <6>[ 1.263658] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.263878] TCP cubic registered
- <6>[ 1.263890] Initializing XFRM netlink socket
- <6>[ 1.264650] NET: Registered protocol family 10
- <6>[ 1.265994] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.266215] IPv6 over IPv4 tunneling driver
- <6>[ 1.268271] NET: Registered protocol family 17
- <6>[ 1.268317] NET: Registered protocol family 15
- <6>[ 1.268479] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.268513] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.268527] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.268542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.268557] Bluetooth: BNEP filters: protocol multicast
- <6>[ 1.268573] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.268810] L2TP core driver, V2.0
- <6>[ 1.268840] PPPoL2TP kernel driver, V2.0
- <6>[ 1.268853] L2TP IP encapsulation support (L2TPv3)
- <6>[ 1.269010] L2TP netlink interface
- <6>[ 1.269050] L2TP ethernet pseudowire support (L2TPv3)
- <6>[ 1.269065] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
- <6>[ 1.269102] ThumbEE CPU extension supported.
- <5>[ 1.269129] Registering SWP/SWPB emulation handler
- <4>[ 1.269150] [rfkill]: init no bt used in configuration
- <4>[ 1.270258] regulator_init_complete: axp22_ldoio0: incomplete constraints, leaving on
- <4>[ 1.270321] regulator_init_complete: axp22_DCDC5: incomplete constraints, leaving on
- <4>[ 1.270381] regulator_init_complete: axp22_DCDC4: incomplete constraints, leaving on
- <4>[ 1.270442] regulator_init_complete: axp22_DCDC3: incomplete constraints, leaving on
- <4>[ 1.270502] regulator_init_complete: axp22_DCDC2: incomplete constraints, leaving on
- <4>[ 1.270562] regulator_init_complete: axp22_DCDC1: incomplete constraints, leaving on
- <4>[ 1.270622] regulator_init_complete: axp22_ldo12: incomplete constraints, leaving on
- <4>[ 1.270977] regulator_init_complete: axp22_ldo4: incomplete constraints, leaving on
- <4>[ 1.271037] regulator_init_complete: axp22_ldo3: incomplete constraints, leaving on
- <4>[ 1.271140] regulator_init_complete: axp22_ldo1: incomplete constraints, leaving on
- <3>[ 1.271239] otg_wakelock_init: No OTG transceiver found
- <6>[ 1.277126] sun6i-rtc sun6i-rtc: sun6i_rtc_gettime
- <6>[ 1.277144] sun6i-rtc sun6i-rtc: read time 2014-12-19 13:53:20
- <6>[ 1.277186] sun6i-rtc sun6i-rtc: setting system clock to 2014-12-19 13:53:20 UTC (1418997200)
- <6>[ 1.277927] Freeing init memory: 284K
- <6>[ 1.277945] Write protecting the kernel text section c0008000 - c0783000
- <6>[ 1.278148] rodata_test: attempting to write to read-only section:
- <6>[ 1.278168] write to read-only section trapped, success
- <4>[ 1.283653] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <6>[ 1.415562] init: command 'loglevel' r=0
- <6>[ 1.415599] init: command 'export' r=0
- <6>[ 1.415621] init: command 'export' r=0
- <6>[ 1.415643] init: command 'export' r=0
- <6>[ 1.415665] init: command 'export' r=0
- <6>[ 1.415686] init: command 'export' r=0
- <6>[ 1.415707] init: command 'export' r=0
- <6>[ 1.415729] init: command 'export' r=0
- <6>[ 1.415750] init: command 'export' r=0
- <6>[ 1.415772] init: command 'export' r=0
- <6>[ 1.415796] init: command 'export' r=0
- <4>[ 1.425415] hello:init_nand_libmodule,21
- <4>[ 1.425434] hello:init_nand_libmodule,22
- <4>[ 1.425453] [NAND]nand init start, nand0_used_flag is 1
- <4>[ 1.425469] [NAND] nand IO Merge: 0x2
- <4>[ 1.425480] [NAND] turn off log release thread
- <4>[ 1.425497] [NAND] nand driver(A31) version: 0x2, 0x12 0x20131012 1612
- <4>[ 1.426611] [NAND]nand get good block ratio 896
- <4>[ 1.426626] nand good block ratio value is valid
- <4>[ 1.426659] Request memory for lsb page table
- <4>[ 1.426672] page type: 0
- <4>[ 1.443248] [NAND]nandlogrelease_thread init
- <6>[ 1.446457] nanda:
- <6>[ 1.448655] nandb: unknown partition table
- <6>[ 1.450657] nandc: unknown partition table
- <6>[ 1.452622] nandd: unknown partition table
- <6>[ 1.455170] nande: unknown partition table
- <6>[ 1.459082] nandf: unknown partition table
- <6>[ 1.461023] nandg: unknown partition table
- <6>[ 1.463507] nandh: unknown partition table
- <6>[ 1.466016] nandi: unknown partition table
- <6>[ 1.469963] nandj: unknown partition table
- <6>[ 1.472475] nandk:
- <4>[ 1.473232] [NAND]nand init end.
- <6>[ 1.473626] init: command 'insmod' r=0
- <6>[ 1.473726] init: command 'symlink' r=0
- <6>[ 1.473800] init: command 'symlink' r=0
- <6>[ 1.473857] init: command 'symlink' r=0
- <6>[ 1.473901] init: command 'mkdir' r=0
- <6>[ 1.474030] init: command 'mount' r=-1
- <6>[ 1.474073] init: command 'mkdir' r=0
- <6>[ 1.474156] init: command 'mkdir' r=0
- <6>[ 1.474247] init: command 'mkdir' r=0
- <6>[ 1.474320] init: command 'mkdir' r=0
- <6>[ 1.474389] init: command 'mkdir' r=0
- <6>[ 1.474464] init: command 'mkdir' r=0
- <6>[ 1.474535] init: command 'mkdir' r=0
- <6>[ 1.474610] init: command 'mkdir' r=0
- <6>[ 1.474680] init: command 'mkdir' r=0
- <6>[ 1.474860] init: command 'mount' r=0
- <6>[ 1.474942] init: command 'mkdir' r=0
- <6>[ 1.475029] init: command 'mkdir' r=0
- <6>[ 1.475102] init: command 'mkdir' r=0
- <6>[ 1.475247] init: command 'mount' r=0
- <6>[ 1.475339] init: command 'mkdir' r=0
- <6>[ 1.475483] init: command 'mount' r=0
- <6>[ 1.475640] init: command 'write' r=0
- <6>[ 1.475779] init: command 'write' r=-2
- <6>[ 1.475894] init: command 'write' r=0
- <6>[ 1.476012] init: command 'write' r=-2
- <6>[ 1.476127] init: command 'write' r=-2
- <6>[ 1.476241] init: command 'write' r=-2
- <6>[ 1.476318] init: command 'write' r=0
- <6>[ 1.476398] init: command 'write' r=0
- <6>[ 1.476479] init: command 'write' r=0
- <6>[ 1.476574] init: command 'write' r=0
- <6>[ 1.476667] init: command 'write' r=0
- <6>[ 1.476752] init: command 'write' r=0
- <6>[ 1.476838] init: command 'write' r=0
- <6>[ 1.476919] init: command 'write' r=0
- <6>[ 1.476965] init: command 'mkdir' r=0
- <6>[ 1.513628] init: command 'mount' r=0
- <6>[ 1.513716] init: command 'chown' r=0
- <6>[ 1.513902] init: command 'chown' r=0
- <6>[ 1.513988] init: command 'chmod' r=0
- <6>[ 1.514047] init: command 'write' r=-22
- <6>[ 1.514107] init: command 'write' r=0
- <6>[ 1.514163] init: command 'write' r=0
- <6>[ 1.514352] init: command 'mkdir' r=0
- <6>[ 1.514416] init: command 'chown' r=0
- <6>[ 1.514472] init: command 'chmod' r=0
- <6>[ 1.514525] init: command 'write' r=0
- <6>[ 1.514582] init: command 'write' r=0
- <6>[ 1.514638] init: command 'write' r=0
- <6>[ 1.514817] init: command 'mkdir' r=0
- <6>[ 1.514882] init: command 'chown' r=0
- <6>[ 1.514941] init: command 'chmod' r=0
- <6>[ 1.515000] init: command 'write' r=0
- <6>[ 1.515059] init: command 'write' r=0
- <6>[ 1.515117] init: command 'write' r=0
- <6>[ 1.515190] init: command 'chmod' r=0
- <6>[ 1.515212] init: processing action 0x34220 (init)
- <6>[ 1.515240] init: command 'export' r=0
- <6>[ 1.515317] init: command 'mkdir' r=0
- <6>[ 1.515387] init: command 'symlink' r=0
- <6>[ 1.515447] init: command 'symlink' r=0
- <6>[ 1.515520] init: command 'mkdir' r=0
- <6>[ 1.515609] init: command 'mkdir' r=0
- <6>[ 1.515742] init: command 'mount' r=0
- <6>[ 1.515818] init: command 'mkdir' r=0
- <6>[ 1.515840] init: processing action 0x343b0 (early-fs)
- <6>[ 1.528874] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: (null)
- <6>[ 1.540097] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <6>[ 1.623389] fs_mgr: Running /system/bin/e2fsck on /dev/block/nandh
- <6>[ 1.734361] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
- <6>[ 1.738956] EXT4-fs (nandi): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <6>[ 1.813401] fs_mgr: Running /system/bin/e2fsck on /dev/block/nandi
- <6>[ 1.830944] EXT4-fs (nandi): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
- <7>[ 1.856973] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 24585
- <7>[ 1.858873] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 24584
- <6>[ 1.860074] EXT4-fs (nande): 2 orphan inodes deleted
- <6>[ 1.860091] EXT4-fs (nande): recovery complete
- <6>[ 1.885507] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <4>[ 1.913359] ====codec_resume_events===
- <4>[ 1.913370] ====codec_resume_events===
- <6>[ 1.923402] fs_mgr: Running /system/bin/e2fsck on /dev/block/nande
- <6>[ 1.957464] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
- <6>[ 1.957891] init: command 'mount_all' r=0
- <6>[ 1.957953] init: command 'setprop' r=0
- <6>[ 2.289310] [DISP]==disp_module_init==
- <6>[ 2.290495] [DISP]==disp_probe call==
- <6>[ 2.290512] [DISP]==disp_probe finish==
- <6>[ 2.290974] [DISP]==disp_module_init finish==
- <6>[ 2.292754] init: command 'insmod' r=0
- <6>[ 2.325637] [LCD]==lcd_module_init==
- <4>[ 2.326695] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/de/disp_lcd.c,line:756: fetch [lcd0_para] lcd_pwm1_used fail!!
- <4>[ 2.327008] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/de/disp_lcd.c,line:294: fetch script data lcd0_para.lcd_max_bright set as default 255
- <4>[ 2.327039] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/de/disp_lcd.c,line:305: fetch script data lcd0_para.lcd_min_bright set as default 64
- <4>[ 2.327067] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/de/disp_lcd.c,line:325: fetch script data lcd0_para.lcd_mipi_panel_seq set as default 0
- <4>[ 2.327870] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/iep/deu/iep_deu.c,line:458: deu_mode1 not exist.
- <4>[ 2.328022] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/iep/drc/iep_drc.c,line:565: lcdgamma4iep for lcd1 not exist.
- <6>[ 2.343355] [DISP]==Fb_Init==
- <6>[ 2.351063] [LCD]==lcd_module_init finish==
- <6>[ 2.351349] init: command 'insmod' r=0
- <6>[ 2.384919] [HDMI]==hdmi_module_init==
- <6>[ 2.386029] [HDMI]==hdmi_probe call==
- <6>[ 2.393629] [DISP]==Fb_Init==
- <6>[ 2.393644] [HDMI]==hdmi_probe finish==
- <6>[ 2.393857] [HDMI]==hdmi_module_init finish==
- <6>[ 2.394124] init: command 'insmod' r=0
- <6>[ 2.394181] init: processing action 0x37388 (console_init)
- <3>[ 2.395050] init: width = 1024
- <3>[ 2.398479] init: height = 768
- <3>[ 2.401907] init: s.st_size = 3145728
- <6>[ 2.420801] init: command 'console_init' r=0
- <6>[ 2.420869] init: processing action 0x2dcf8 (fs)
- <6>[ 2.420972] init: command 'mount' r=-1
- <6>[ 2.420998] init: command 'mount' r=-1
- <6>[ 2.421019] init: command 'mount' r=-1
- <6>[ 2.421039] init: command 'mount' r=-1
- <6>[ 2.421059] init: processing action 0x344b8 (fs)
- <3>[ 2.422507] init: dont need format /dev/block/nandk
- <6>[ 2.427866] init: command 'format_userdata' r=1
- <6>[ 2.438974] init: command 'mkdir' r=0
- <4>[ 2.631936] create_regulator: axp22_DCDC2: Failed to create debugfs directory
- <7>[ 2.632549] gpu:open gpu power!
- <6>[ 2.645716] init: command 'insmod' r=0
- <6>[ 2.667917] init: command 'insmod' r=0
- <6>[ 2.668144] init: command 'chmod' r=0
- <6>[ 2.668155] PVR_K:(Error): ############ !psDevInfo->psKernelSGXHostCtlMemInfo [0, ]
- <6>[ 2.668246] init: command 'chmod' r=0
- <6>[ 2.679585] init: command 'insmod' r=0
- <6>[ 2.687870] init: command 'insmod' r=0
- <4>[ 2.708165] create_regulator: axp22_ldo7: Failed to create debugfs directory
- <4>[ 2.708198] create_regulator: axp22_ldoio0: Failed to create debugfs directory
- <4>[ 2.708228] create_regulator: axp22_ldo10: Failed to create debugfs directory
- <4>[ 2.708274] create_regulator: axp22_ldo7: Failed to create debugfs directory
- <4>[ 2.708301] create_regulator: axp22_ldo10: Failed to create debugfs directory
- <4>[ 2.903557] [i2c0] incomplete xfer (status: 0x20, dev addr: 0x3c)
- <4>[ 3.083552] [i2c0] incomplete xfer (status: 0x20, dev addr: 0x21)
- <6>[ 3.645286] init: command 'insmod' r=0
- <6>[ 3.655226] init: command 'insmod' r=0
- <6>[ 3.665706] init: command 'insmod' r=0
- <6>[ 3.672583] init: command 'insmod' r=0
- <6>[ 3.678672] init: command 'insmod' r=0
- <6>[ 3.690970] init: command 'insmod' r=0
- <6>[ 3.703613] init: command 'insmod' r=0
- <6>[ 3.716409] init: command 'insmod' r=0
- <6>[ 3.728939] init: command 'insmod' r=0
- <6>[ 3.741460] init: command 'insmod' r=0
- <6>[ 3.754267] init: command 'insmod' r=0
- <6>[ 3.767869] init: command 'insmod' r=0
- <6>[ 3.780666] init: command 'insmod' r=0
- <5>[ 3.850619] [VFE]Welcome to Video Front End driver
- <5>[ 3.851270] [VFE]pdev->id = 1
- <5>[ 3.851284] [VFE]dev->mipi_sel = 1
- <5>[ 3.851298] [VFE]dev->vip_sel = 1
- <5>[ 3.851309] [VFE]dev->isp_sel = 0
- <5>[ 3.851636] [VFE]vip_pin_list addr = 0
- <5>[ 3.851650] [VFE]request gpio cnt=18, i=16
- <5>[ 3.852049] [VFE]vfe_init end
- <6>[ 3.852512] init: command 'insmod' r=0
- <5>[ 3.853389] [VFE]probe_work_handle start!
- <5>[ 3.854023] [VFE]registered sub device,input_num = 0
- <4>[ 3.854082] create_regulator: axp22_ldo7: Failed to create debugfs directory
- <4>[ 3.854110] create_regulator: axp22_ldoio0: Failed to create debugfs directory
- <4>[ 3.854139] create_regulator: axp22_ldo10: Failed to create debugfs directory
- <5>[ 3.854695] [VFE]registered sub device,input_num = 1
- <4>[ 3.854727] create_regulator: axp22_ldo7: Failed to create debugfs directory
- <4>[ 3.854753] create_regulator: axp22_ldoio0: Failed to create debugfs directory
- <4>[ 3.854781] create_regulator: axp22_ldo10: Failed to create debugfs directory
- <5>[ 3.854798] [VFE]power on and standy on camera 0!
- <5>[ 3.856067] [VFE]mclk on
- <4>[ 3.868114] [VFE_WARN]invalid gpio
- <7>[ 3.877738] G2D: drv_g2d_init
- <6>[ 3.877966] G2D: Module initialized.major:246
- <6>[ 3.878177] init: command 'insmod' r=0
- <6>[ 3.887595] init: command 'rm' r=0
- <7>[ 3.898699] ======i2c_hardware_init=========.
- <7>[ 3.898745] ========sensor_fetch_sysconfig_para===================
- <7>[ 3.898767] sensor_fetch_sysconfig_para: gsensor_twi_id is 2.
- <7>[ 3.898782] ========lsensor_fetch_sysconfig_para===================
- <4>[ 3.898798] sysconfing_get_para: type err device_used val.val:-284746132
- <7>[ 3.898813] line:316:=========script_get_item_err============
- <7>[ 3.898827] lsensor_fetch_sysconfig_para: light sensor_unused.
- <4>[ 3.898841] i2c_hardware_init: light sensor_fetch_sysconfig_para err.
- <7>[ 3.898855] ========gyr_sensor_fetch_sysconfig_para===================
- <7>[ 3.898872] gyr_sensor_fetch_sysconfig_para: gyr sensor_unused.
- <4>[ 3.898885] i2c_hardware_init: gyr sensor_fetch_sysconfig_para err.
- <7>[ 3.898900] ========ctp_fetch_sysconfig_para===================
- <7>[ 3.898917] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
- <4>[ 3.898931] sysconfing_get_para: type err device_used val.val:-284746132
- <7>[ 3.898946] line:316:=========script_get_item_err============
- <7>[ 3.899082] g_device_used:1,c_device_used:1,l_device_used:0,gyr_device_used:0
- <6>[ 3.899106] init: command 'insmod' r=0
- <4>[ 3.899310] get_device_info:read erro or read null !
- <4>[ 3.899341] get twi config erro!
- <6>[ 3.907310] keyboard map config:115,0,114,0,0,0,0,0,0,0,0,0,0
- <6>[ 3.907801] input: sw-keyboard as /devices/virtual/input/input2
- <6>[ 3.908236] init: command 'insmod' r=0
- <6>[ 3.908322] init: command 'chmod' r=-2
- <4>[ 3.918787] ======mma7660_init=========.
- <6>[ 3.919098] gsensor_detect: addr= 4c
- <4>[ 3.919283] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
- <4>[ 3.933517] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
- <6>[ 3.953354] gsensor_detect:I2C connection might be something wrong or maybe the other gsensor equipment!
- <6>[ 3.953425] init: command 'insmod' r=0
- <6>[ 3.953511] init: command 'insmod' r=-1
- <6>[ 3.970600] usbcore: registered new interface driver asix
- <6>[ 3.970660] init: command 'insmod' r=0
- <6>[ 3.985370] usbcore: registered new interface driver qf9700
- <6>[ 3.985424] init: command 'insmod' r=0
- <6>[ 3.999063] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- <6>[ 3.999121] init: command 'insmod' r=0
- <6>[ 3.999211] init: command 'insmod' r=-1
- <6>[ 3.999257] init: processing action 0x2dde0 (post-fs)
- <6>[ 3.999370] init: command 'mount' r=0
- <6>[ 3.999415] init: command 'mount' r=0
- <6>[ 3.999567] init: command 'chown' r=0
- <6>[ 3.999635] init: command 'chmod' r=0
- <6>[ 3.999657] init: command 'restorecon' r=0
- <6>[ 4.001267] init: command 'chown' r=-2
- <6>[ 4.001313] init: command 'chmod' r=-2
- <6>[ 4.001334] init: command 'restorecon' r=0
- <6>[ 4.001459] init: command 'chown' r=0
- <6>[ 4.001541] init: command 'chmod' r=0
- <6>[ 4.001623] init: command 'chown' r=0
- <6>[ 4.001703] init: command 'chmod' r=0
- <6>[ 4.001786] init: command 'chown' r=0
- <6>[ 4.001882] init: command 'chmod' r=0
- <6>[ 4.001962] init: command 'chown' r=0
- <6>[ 4.002040] init: command 'chmod' r=0
- <6>[ 4.002117] init: command 'chown' r=-2
- <6>[ 4.002180] init: command 'chmod' r=-2
- <6>[ 4.002346] init: command 'mkdir' r=0
- <6>[ 4.002381] init: processing action 0x2e110 (post-fs-data)
- <6>[ 4.002456] init: command 'chown' r=0
- <6>[ 4.002518] init: command 'chmod' r=0
- <6>[ 4.002539] init: command 'restorecon' r=0
- <6>[ 4.002687] init: command 'mkdir' r=0
- <6>[ 4.002731] init: command 'copy' r=-1
- <6>[ 4.003767] init: command 'chown' r=-2
- <6>[ 4.003813] init: command 'chmod' r=-2
- <6>[ 4.003854] init: command 'copy' r=-1
- <6>[ 4.003917] init: command 'chown' r=-2
- <6>[ 4.003959] init: command 'chmod' r=-2
- <6>[ 4.004001] init: command 'write' r=-2
- <6>[ 4.004125] init: command 'mkdir' r=0
- <6>[ 4.004304] init: command 'mkdir' r=0
- <6>[ 4.004439] init: command 'mkdir' r=0
- <6>[ 4.004594] init: command 'mkdir' r=0
- <6>[ 4.004728] init: command 'mkdir' r=0
- <6>[ 4.004861] init: command 'mkdir' r=0
- <6>[ 4.005007] init: command 'mkdir' r=0
- <6>[ 4.005141] init: command 'mkdir' r=0
- <6>[ 4.005282] init: command 'mkdir' r=0
- <6>[ 4.006348] init: command 'chmod' r=0
- <6>[ 4.006418] init: command 'chown' r=0
- <6>[ 4.006556] init: command 'mkdir' r=0
- <6>[ 4.006692] init: command 'mkdir' r=0
- <6>[ 4.006756] init: command 'chown' r=0
- <6>[ 4.006884] init: command 'mkdir' r=0
- <6>[ 4.007026] init: command 'mkdir' r=0
- <6>[ 4.008082] init: command 'mkdir' r=0
- <6>[ 4.008238] init: command 'mkdir' r=0
- <6>[ 4.008381] init: command 'mkdir' r=0
- <6>[ 4.008523] init: command 'mkdir' r=0
- <6>[ 4.008661] init: command 'mkdir' r=0
- <6>[ 4.008798] init: command 'mkdir' r=0
- <6>[ 4.008928] init: command 'mkdir' r=0
- <6>[ 4.009069] init: command 'mkdir' r=0
- <6>[ 4.010198] init: command 'mkdir' r=0
- <6>[ 4.010340] init: command 'mkdir' r=0
- <6>[ 4.010471] init: command 'mkdir' r=0
- <6>[ 4.010534] init: command 'chown' r=0
- <6>[ 4.010593] init: command 'chmod' r=0
- <6>[ 4.010726] init: command 'mkdir' r=0
- <6>[ 4.010860] init: command 'mkdir' r=0
- <6>[ 4.011007] init: command 'mkdir' r=0
- <6>[ 4.011030] init: processing action 0x32388 (post-fs-data)
- <6>[ 4.011246] init: command 'chown' r=0
- <6>[ 4.011375] init: command 'chmod' r=0
- <6>[ 4.011486] init: command 'chown' r=0
- <6>[ 4.011581] init: command 'chmod' r=0
- <6>[ 4.011603] init: processing action 0x34488 (post-fs-data)
- <6>[ 4.011625] init: processing action 0x373d0 (property_service_init)
- <6>[ 4.018011] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
- <3>[ 4.021211] FAT-fs (nandj): bogus logical sector size 65535
- <6>[ 4.027478] FAT-fs (nandj): Can't find a valid FAT filesystem
- <4>[ 4.053369] [sun6i_usb]: ERR: usb_restrict gpio_request failed
- <7>[ 4.053381] -----the name is null !-----
- <4>[ 4.053571] [i2c1] incomplete xfer (status: 0x20, dev addr: 0x38)
- <4>[ 4.073504] [i2c1] incomplete xfer (status: 0x20, dev addr: 0x38)
- <5>[ 4.083348] [VFE]mclk off
- <5>[ 4.083369] [VFE]power on and standy on camera 1!
- <4>[ 4.083390] ------------[ cut here ]------------
- <4>[ 4.083417] WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x5c/0x1c4()
- <4>[ 4.083430] autorequest GPIO-105
- <4>[ 4.083439] Modules linked in: mcs7830 qf9700 asix mma7660 sw_keyboard device g2d_33 vfe_v4l2 gt2005 gc2035 sp0a19 sp2518 gc0329 gc0328 gc0308 vfe_subdev vfe_os cci ad5820_act actuator cam_detect videobuf_dma_contig videobuf_core dc_sunxi(O) pvrsrvkm(O) hdmi lcd disp nand(O)
- <4>[ 4.083563] Backtrace:
- <4>[ 4.083590] [<c00129c0>] (dump_backtrace+0x0/0x118) from [<c0582208>] (dump_stack+0x20/0x24)
- <4>[ 4.083606] r6:c06feed1 r5:00000065 r4:eeb11dd8 r3:c07e1a34
- <4>[ 4.083643] [<c05821e8>] (dump_stack+0x0/0x24) from [<c005ede0>] (warn_slowpath_common+0x5c/0x74)
- <4>[ 4.083665] [<c005ed84>] (warn_slowpath_common+0x0/0x74) from [<c005eeb4>] (warn_slowpath_fmt+0x40/0x48)
- <4>[ 4.083680] r8:c07e05a8 r7:c087d86c r6:00000064 r5:00000000 r4:c087d870
- <4>[ 4.083708] r3:00000009
- <4>[ 4.083728] [<c005ee74>] (warn_slowpath_fmt+0x0/0x48) from [<c02922cc>] (gpio_ensure_requested+0x5c/0x1c4)
- <4>[ 4.083743] r3:00000069 r2:c06fef73
- <4>[ 4.083768] [<c0292270>] (gpio_ensure_requested+0x0/0x1c4) from [<c02925c8>] (gpio_direction_output+0x88/0x2b4)
- <4>[ 4.083800] [<c0292540>] (gpio_direction_output+0x0/0x2b4) from [<bf1e81fc>] (os_gpio_set_status+0x34/0xb0 [vfe_os])
- <4>[ 4.083832] [<bf1e81c8>] (os_gpio_set_status+0x0/0xb0 [vfe_os]) from [<bf1ed0f8>] (vfe_gpio_set_status+0xc4/0xcc [vfe_subdev])
- <4>[ 4.083849] r4:00000001 r3:00000000
- <4>[ 4.083882] [<bf1ed034>] (vfe_gpio_set_status+0x0/0xcc [vfe_subdev]) from [<bf1f130c>] (sensor_power+0xc4/0x2c0 [gc0308])
- <4>[ 4.083899] r5:ee506600 r4:eeba4480
- <4>[ 4.083972] [<bf1f1248>] (sensor_power+0x0/0x2c0 [gc0308]) from [<bf22ff48>] (probe_work_handle+0x5e4/0x838 [vfe_v4l2])
- <4>[ 4.083988] r6:00000001 r5:ee390b54 r4:ee3900fc r3:bf1f1248
- <4>[ 4.084059] [<bf22f964>] (probe_work_handle+0x0/0x838 [vfe_v4l2]) from [<c0078a70>] (process_one_work+0x290/0x488)
- <4>[ 4.084083] [<c00787e0>] (process_one_work+0x0/0x488) from [<c0078fd4>] (worker_thread+0x1a8/0x2a4)
- <4>[ 4.084109] [<c0078e2c>] (worker_thread+0x0/0x2a4) from [<c007dd4c>] (kthread+0x9c/0xa8)
- <4>[ 4.084134] [<c007dcb0>] (kthread+0x0/0xa8) from [<c00627a0>] (do_exit+0x0/0x764)
- <4>[ 4.084147] r6:c00627a0 r5:c007dcb0 r4:ef0aded0
- <4>[ 4.084171] ---[ end trace ebf07b717e400556 ]---
- <7>[ 4.093802] i2c_update_device_name:gsensor_name:, ctp_name:gt82x
- <6>[ 4.095039] buf : ctp_revert_x_flag = 0
- <6>[ 4.095045] ctp_revert_y_flag = 0
- <6>[ 4.095051] ctp_exchange_x_y_flag = 1
- <6>[ 4.095056]
- <6>[ 4.095060] i = 6
- <7>[ 4.095086] -----the name is null !-----
- <4>[ 4.095259] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
- <4>[ 4.096223] [VFE_WARN]invalid gpio
- <3>[ 4.103402] init: mount /dev/block/nandj failed!
- <3>[ 4.108616] init: open /mnt/private/sn.txt failed
- <3>[ 4.113936] init: open /mnt/private/sn.txt failed
- <3>[ 4.119233] init: open /mnt/private/wifi.txt failed
- <4>[ 4.123499] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x18)
- <3>[ 4.124745] init: open /mnt/private/imei.txt failed
- <3>[ 4.130236] init: open /mnt/private/bt.txt failed
- <5>[ 4.130460] [VFE]mclk on
- <6>[ 4.135536] init: command 'property_service_init' r=0
- <6>[ 4.135567] init: processing action 0x37418 (signal_init)
- <6>[ 4.135670] init: command 'signal_init' r=0
- <6>[ 4.135694] init: processing action 0x37460 (check_startup)
- <6>[ 4.135763] init: command 'check_startup' r=0
- <6>[ 4.135799] init: processing action 0x2e8d0 (boot)
- <6>[ 4.136769] init: command 'ifup' r=0
- <6>[ 4.136909] init: command 'hostname' r=0
- <6>[ 4.137002] init: command 'domainname' r=0
- <6>[ 4.138088] init: command 'chown' r=-30
- <6>[ 4.138140] init: command 'chmod' r=-30
- <6>[ 4.138172] init: command 'setrlimit' r=0
- <6>[ 4.138262] init: command 'write' r=0
- <6>[ 4.138345] init: command 'write' r=0
- <6>[ 4.138471] init: command 'chown' r=0
- <6>[ 4.138538] init: command 'chmod' r=0
- <6>[ 4.138616] init: command 'chown' r=0
- <6>[ 4.138681] init: command 'chmod' r=0
- <6>[ 4.138763] init: command 'write' r=0
- <6>[ 4.138843] init: command 'write' r=0
- <6>[ 4.138907] init: command 'chown' r=-2
- <6>[ 4.138966] init: command 'chown' r=-2
- <6>[ 4.139025] init: command 'chown' r=-2
- <6>[ 4.139084] init: command 'chown' r=-2
- <6>[ 4.139145] init: command 'chown' r=-2
- <6>[ 4.139241] init: command 'chown' r=-2
- <6>[ 4.139316] init: command 'chown' r=0
- <6>[ 4.139398] init: command 'chown' r=0
- <6>[ 4.139470] init: command 'chown' r=0
- <6>[ 4.139542] init: command 'chown' r=0
- <6>[ 4.139602] init: command 'chmod' r=0
- <6>[ 4.139660] init: command 'chmod' r=0
- <6>[ 4.139719] init: command 'chmod' r=0
- <6>[ 4.139809] init: command 'chown' r=-2
- <6>[ 4.139889] init: command 'chmod' r=-2
- <6>[ 4.139970] init: command 'chown' r=-2
- <6>[ 4.140047] init: command 'chmod' r=-2
- <6>[ 4.140128] init: command 'chown' r=-2
- <6>[ 4.140205] init: command 'chmod' r=-2
- <6>[ 4.140283] init: command 'chown' r=-2
- <6>[ 4.140361] init: command 'chmod' r=-2
- <6>[ 4.140441] init: command 'chown' r=-2
- <6>[ 4.140522] init: command 'chmod' r=-2
- <6>[ 4.140601] init: command 'chown' r=-2
- <6>[ 4.140679] init: command 'chmod' r=-2
- <6>[ 4.140757] init: command 'chown' r=-2
- <6>[ 4.140837] init: command 'chown' r=-2
- <6>[ 4.140918] init: command 'chmod' r=-2
- <6>[ 4.140999] init: command 'chown' r=-2
- <6>[ 4.141079] init: command 'chmod' r=-2
- <6>[ 4.141168] init: command 'chown' r=0
- <6>[ 4.141239] init: command 'chmod' r=0
- <6>[ 4.141322] init: command 'chown' r=0
- <6>[ 4.141391] init: command 'chmod' r=0
- <6>[ 4.141473] init: command 'chown' r=0
- <6>[ 4.141543] init: command 'chmod' r=0
- <6>[ 4.141628] init: command 'chown' r=0
- <6>[ 4.141697] init: command 'chmod' r=0
- <6>[ 4.141779] init: command 'chown' r=0
- <6>[ 4.141850] init: command 'chmod' r=0
- <6>[ 4.141924] init: command 'chown' r=-2
- <6>[ 4.141994] init: command 'chown' r=-2
- <6>[ 4.142060] init: command 'chown' r=-2
- <6>[ 4.142126] init: command 'chown' r=-2
- <6>[ 4.142194] init: command 'chown' r=-2
- <6>[ 4.142259] init: command 'chown' r=-2
- <6>[ 4.142324] init: command 'chown' r=-2
- <6>[ 4.142389] init: command 'chown' r=-2
- <6>[ 4.142453] init: command 'chown' r=-2
- <6>[ 4.142517] init: command 'chown' r=-2
- <6>[ 4.142582] init: command 'chown' r=-2
- <6>[ 4.142649] init: command 'chown' r=-2
- <6>[ 4.142713] init: command 'chown' r=-2
- <6>[ 4.142779] init: command 'chown' r=-2
- <6>[ 4.142843] init: command 'chown' r=-2
- <6>[ 4.142907] init: command 'chown' r=-2
- <6>[ 4.142971] init: command 'chown' r=-2
- <6>[ 4.143042] init: command 'chown' r=-2
- <6>[ 4.143110] init: command 'chown' r=-2
- <6>[ 4.143215] init: command 'chown' r=0
- <6>[ 4.143291] init: command 'chown' r=0
- <6>[ 4.143397] init: command 'chown' r=0
- <6>[ 4.143474] init: command 'chown' r=0
- <4>[ 4.143530] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x19)
- <6>[ 4.143549] init: command 'chown' r=0
- <6>[ 4.143623] init: command 'chown' r=0
- <6>[ 4.143726] init: command 'chown' r=0
- <6>[ 4.143824] init: command 'chmod' r=-30
- <6>[ 4.143910] init: command 'setprop' r=0
- <6>[ 4.143987] init: command 'setprop' r=0
- <6>[ 4.144062] init: command 'setprop' r=0
- <6>[ 4.144137] init: command 'setprop' r=0
- <6>[ 4.144212] init: command 'setprop' r=0
- <6>[ 4.144288] init: command 'setprop' r=0
- <6>[ 4.144363] init: command 'setprop' r=0
- <6>[ 4.144438] init: command 'setprop' r=0
- <6>[ 4.144513] init: command 'setprop' r=0
- <6>[ 4.144589] init: command 'setprop' r=0
- <6>[ 4.144664] init: command 'setprop' r=0
- <6>[ 4.144708] init: command 'setprop' r=0
- <5>[ 4.144809] init: starting 'servicemanager'
- <5>[ 4.145278] init: starting 'vold'
- <6>[ 4.145988] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
- <5>[ 4.146833] init: starting 'pvrsrvctl'
- <6>[ 4.147161] init: command 'class_start' r=0
- <5>[ 4.147276] init: starting 'netd'
- <5>[ 4.147647] init: starting 'debuggerd'
- <6>[ 4.147958] init: Created socket '/dev/socket/mdns' with mode '660', user '0', group '1000'
- <5>[ 4.148061] init: starting 'surfaceflinger'
- <6>[ 4.148097] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
- <6>[ 4.148232] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
- <5>[ 4.148469] init: starting 'zygote'
- <5>[ 4.148867] init: starting 'drm'
- <6>[ 4.149224] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
- <5>[ 4.149265] init: starting 'media'
- <5>[ 4.149676] init: starting 'installd'
- <3>[ 4.150094] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- <6>[ 4.150417] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
- <5>[ 4.159561] init: starting 'keystore'
- <5>[ 4.160029] init: starting 'ril-daemon'
- <6>[ 4.160347] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
- <5>[ 4.160456] init: starting 'u3gmonitor'
- <6>[ 4.160805] init: command 'class_start' r=0
- <6>[ 4.160877] init: processing action 0x36f30 (boot)
- <6>[ 4.160892] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
- <6>[ 4.160993] init: command 'chmod' r=0
- <6>[ 4.161022] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
- <6>[ 4.161088] init: command 'chown' r=0
- <6>[ 4.161163] init: command 'chown' r=0
- <6>[ 4.161248] init: command 'chown' r=0
- <6>[ 4.161340] init: command 'chown' r=0
- <6>[ 4.161417] init: command 'chown' r=0
- <6>[ 4.161495] init: command 'chown' r=0
- <6>[ 4.161571] init: command 'chown' r=0
- <6>[ 4.161652] init: command 'chown' r=0
- <6>[ 4.161753] init: command 'chown' r=-2
- <6>[ 4.161821] init: command 'chown' r=0
- <6>[ 4.161887] init: command 'chmod' r=0
- <6>[ 4.161951] init: command 'chmod' r=0
- <6>[ 4.162014] init: command 'chmod' r=0
- <6>[ 4.162083] init: command 'chmod' r=0
- <6>[ 4.162152] init: command 'chmod' r=0
- <6>[ 4.162220] init: command 'chmod' r=0
- <6>[ 4.162287] init: command 'chmod' r=0
- <6>[ 4.162354] init: command 'chmod' r=0
- <6>[ 4.162444] init: command 'chmod' r=-2
- <6>[ 4.162506] init: command 'chmod' r=0
- <4>[ 4.163556] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x19)
- <4>[ 4.183558] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x8)
- <6>[ 4.183580] init: command 'chown' r=0
- <4>[ 4.203566] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x8)
- <6>[ 4.223455] init: command 'chmod' r=0
- <6>[ 4.223519] init: processing action 0x374a8 (queue_property_triggers)
- <4>[ 4.223535] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1c)
- <6>[ 4.223648] init: command 'queue_property_triggers' r=0
- <6>[ 4.223673] init: processing action 0x2f7b0 (nonencrypted)
- <6>[ 4.223701] init: command 'class_start' r=0
- <6>[ 4.223722] init: processing action 0x2fc50 (property:ro.debuggable=1)
- <5>[ 4.223867] init: starting 'console'
- <6>[ 4.224302] init: command 'start' r=0
- <6>[ 4.224337] init: processing action 0x32d80 (property:persist.sys.usb.config=*)
- <6>[ 4.224431] init: command 'setprop' r=0
- <6>[ 4.224542] init: command 'setprop' r=0
- <6>[ 4.224572] init: processing action 0x32458 (property:sys.usb.config=none)
- <6>[ 4.224635] init: command 'stop' r=0
- <6>[ 4.224827] init: command 'write' r=0
- <6>[ 4.224953] init: command 'write' r=0
- <6>[ 4.225022] init: command 'setprop' r=0
- <6>[ 4.225048] init: processing action 0x35e50 (property:sys.usb.config=mass_storage,adb)
- <6>[ 4.225164] init: command 'write' r=0
- <6>[ 4.225289] init: command 'write' r=0
- <6>[ 4.225402] init: command 'write' r=0
- <6>[ 4.225525] init: command 'write' r=0
- <6>[ 4.225630] init: command 'write' r=0
- <5>[ 4.225671] init: starting 'adbd'
- <6>[ 4.226119] init: command 'start' r=0
- <6>[ 4.226218] init: command 'setprop' r=0
- <6>[ 4.226485] init: Created socket '/dev/socket/adbd' with mode '660', user '1000', group '1000'
- <6>[ 4.228459] adb_open
- <4>[ 4.228498] ep_matches, wrn: endpoint already claimed, ep(0xc07fdde4, 0xef327e80, ep1-bulk)
- <6>[ 4.228518] adb_bind_config
- <4>[ 4.228534] ep_matches, wrn: endpoint already claimed, ep(0xc07fdde4, 0xef327e80, ep1-bulk)
- <4>[ 4.228552] ep_matches, wrn: endpoint already claimed, ep(0xc07fde30, 0xef327e80, ep2-bulk)
- <4>[ 4.228572] ep_matches, wrn: endpoint already claimed, ep(0xc07fdde4, 0xef327e80, ep1-bulk)
- <4>[ 4.228590] ep_matches, wrn: endpoint already claimed, ep(0xc07fde30, 0xef327e80, ep2-bulk)
- <4>[ 4.228608] ep_matches, wrn: endpoint already claimed, ep(0xc07fde7c, 0xef204900, ep3-bulk)
- <4>[ 4.228631] [sw_udc]: alloc request: ep(0xc07fdec8, ep4-bulk, 512), req(0xee6bfe40)
- <4>[ 4.228668] [sw_udc]: alloc request: ep(0xc07fde7c, ep3-bulk, 512), req(0xee6bfdc0)
- <4>[ 4.228689] [sw_udc]: alloc request: ep(0xc07fde7c, ep3-bulk, 512), req(0xee6bfd40)
- <4>[ 4.228709] [sw_udc]: alloc request: ep(0xc07fde7c, ep3-bulk, 512), req(0xee6bfcc0)
- <4>[ 4.228736] [sw_udc]: alloc request: ep(0xc07fde7c, ep3-bulk, 512), req(0xee6bfc40)
- <4>[ 4.228762] [sw_udc]: sw_udc_pullup, is_on = 1
- <4>[ 4.228775] [sun6i_usb]: usb device is not active
- <5>[ 4.235439] [VFE]mclk off
- <5>[ 4.236010] [VFE]V4L2 device registered as video1
- <5>[ 4.236049] [VFE]register_early_suspend @ probe handle!
- <5>[ 4.236062] [VFE]probe_work_handle end!
- <4>[ 4.243561] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1c)
- <4>[ 4.263550] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1d)
- <4>[ 4.283560] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1d)
- <4>[ 4.303561] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
- <4>[ 4.323542] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x4c)
- <4>[ 4.343573] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x28)
- <4>[ 4.363546] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x28)
- <4>[ 4.384085] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x29)
- <4>[ 4.403662] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x29)
- <4>[ 4.423555] [i2c2] incomplete xfer (status: 0x20, dev addr: 0xf)
- <4>[ 4.443558] [i2c2] incomplete xfer (status: 0x20, dev addr: 0xf)
- <6>[ 4.447759] init: waitpid returned pid 1215, status = 00000000
- <5>[ 4.447799] init: process 'pvrsrvctl', pid 1215 exited
- <4>[ 4.463778] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x15)
- <4>[ 4.483711] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x15)
- <4>[ 4.503556] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1e)
- <4>[ 4.523534] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1e)
- <4>[ 4.543542] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1f)
- <4>[ 4.563553] [i2c2] incomplete xfer (status: 0x20, dev addr: 0x1f)
- <7>[ 4.583578] i2c_update_device_name:gsensor_name:stk8312, ctp_name:gt82x
- <7>[ 4.583604] write:1,flag:3
- <7>[ 4.583615] set_device_info:write device info !
- <6>[ 4.583975] buf : ctp_revert_x_flag = 0
- <6>[ 4.583981] ctp_revert_y_flag = 0
- <6>[ 4.583987] ctp_exchange_x_y_flag = 1
- <6>[ 4.583992]
- <6>[ 4.583996] i = 6
- <5>[ 5.185176] init: starting 'bootanim'
- <4>[ 5.185853] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/de/disp_layer.c,line:363: all layer resource used!
- <4>[ 6.387178] codec_set_spk_headset_earpiece,line:2172, codec_speaker_headset_earpiece_en:1
- <4>[ 7.263381] [sun6i_usb]:
- <4>[ 7.263392]
- <4>[ 7.263396] insmod_device_driver
- <4>[ 7.263402]
- <4>[ 7.263418] [sw_udc]: sw_usb_device_enable start
- <4>[ 7.263433] [sw_udc]: usb_vbase = 0xf1c19000
- <4>[ 7.263446] [sw_udc]: sram_vbase = 0xf1c00000
- <4>[ 7.263494] [sw_udc]: open_usb_clock
- <4>[ 7.263731] [sw_udc]: usbd_stop_work
- <4>[ 7.263758] [sun6i_usb]: line:539 sw_udc_dma_probe name:sw_usb_udc_dma_1 dma_hdle[1] = 0xc0830e4c
- <4>[ 7.263779] [sun6i_usb]: line:539 sw_udc_dma_probe name:sw_usb_udc_dma_2 dma_hdle[2] = 0xc0830ed0
- <4>[ 7.263800] [sun6i_usb]: line:539 sw_udc_dma_probe name:sw_usb_udc_dma_3 dma_hdle[3] = 0xc0830f54
- <4>[ 7.263821] [sun6i_usb]: line:539 sw_udc_dma_probe name:sw_usb_udc_dma_4 dma_hdle[4] = 0xc0830fd8
- <4>[ 7.263842] [sun6i_usb]: line:539 sw_udc_dma_probe name:sw_usb_udc_dma_5 dma_hdle[5] = 0xc083105c
- <4>[ 7.263903] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED: USBC_TS_MODE_HS
- <4>[ 7.263919] [sw_udc]: usbd_start_work
- <4>[ 7.263931] [sw_udc]: usbd_start_work
- <4>[ 7.263942] [sw_udc]: sw_usb_device_enable end
- <4>[ 7.319401] [sw_udc]: IRQ: suspend
- <4>[ 7.319423] [sw_udc]: ERR: usb speed is unkown
- <4>[ 7.419254] [sw_udc]: IRQ: reset
- <4>[ 7.419281] (1:star,2:end): vfs_read:0, vfs_write:0,dma_working:0,amount:0,file_offset:0
- <4>[ 7.419298] [sw_udc]: irq: reset happen, throw away all urb
- <4>[ 7.534507] [sw_udc]:
- <4>[ 7.534520] +++++++++++++++++++++++++++++++++++++
- <4>[ 7.534535] [sw_udc]: usb enter high speed.
- <4>[ 7.534545] [sw_udc]:
- <4>[ 7.534549] +++++++++++++++++++++++++++++++++++++
- <6>[ 7.535068] android_work: sent uevent USB_STATE=CONNECTED
- <4>[ 7.550538] [sw_udc]: Set address 1
- <6>[ 7.581259] android_usb gadget: high-speed config #1: android
- <4>[ 7.581313] [sw_udc]: ep enable: ep3(0xc07fde7c, ep3-bulk, 128, 512)
- <4>[ 7.581337] [sw_udc]: ep enable: ep4(0xc07fdec8, ep4-bulk, 0, 512)
- <4>[ 7.581422] [sw_udc]: ep enable: ep1(0xc07fdde4, ep1-bulk, 128, 512)
- <4>[ 7.581445] [sw_udc]: ep enable: ep2(0xc07fde30, ep2-bulk, 0, 512)
- <4>[ 7.581470] [sw_udc]: alloc request: ep(0xc07fdde4, ep1-bulk, 512), req(0xedd73340)
- <4>[ 7.581489] [sw_udc]: alloc request: ep(0xc07fde30, ep2-bulk, 512), req(0xedd85ac0)
- <4>[ 7.581509] [sw_udc]: alloc request: ep(0xc07fdde4, ep1-bulk, 512), req(0xedc24440)
- <4>[ 7.581528] [sw_udc]: alloc request: ep(0xc07fde30, ep2-bulk, 512), req(0xedd85d40)
- <4>[ 7.581785] [sun6i_usb]: nuke: ep num is 0
- <6>[ 7.582039] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 10.694538] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- <4>[ 10.853547] ======stk831x(8312) init======
- <4>[ 10.853996] ======stk831x init detect======
- <4>[ 10.854018] ======stk831x init detect======
- <4>[ 10.854034] ======stk831x init detect======
- <6>[ 10.854050] gsensor_detect: Detected chip stk8312 at adapter 2, address 0x3d
- <6>[ 10.854478] stk831x_probe: driver version:1.6.1 2013/05/17
- <6>[ 10.854597] STK831x_Init: Initialize stk8312
- <6>[ 10.855906] input: stk8312 as /devices/virtual/input/input3
- <6>[ 10.856879] STK831x_SetEnable:1
- <6>[ 10.856893] stk_handle_first_en: In.
- <6>[ 10.858342] stk_handle_first_en: set offset:0,2,1, mode=4
- <6>[ 10.858358] stk_handle_first_en: Out. cali_status = 0x4
- <6>[ 10.913842] STK831x_ReadByteOTP: read 0x7f=0x9
- <6>[ 10.973854] STK831x_ReadByteOTP: read 0x70=0xdc
- <6>[ 10.974749] stk831x_probe successfully
- <4>[ 10.974786] ======stk831x init detect======
- <4>[ 10.974892] ======stk831x init ok======
- <4>[ 11.023779] i2c-core: driver [gt82x] using legacy suspend method
- <4>[ 11.023798] i2c-core: driver [gt82x] using legacy resume method
- <6>[ 11.025090] input: gt82x as /devices/virtual/input/input4
- <4>[ 11.026003] [i2c1] incomplete xfer (status: 0x20, dev addr: 0x5d)
- <4>[ 11.026175] [i2c1] incomplete xfer (status: 0x20, dev addr: 0x5d)
- <6>[ 11.026642] init: processing action 0x2fe88 (property:sys.sensors=1)
- <5>[ 11.026759] init: starting 'sensors'
- <6>[ 11.027174] init: command 'start' r=0
- <6>[ 11.110106] init: waitpid returned pid 1992, status = 00000000
- <5>[ 11.110138] init: process 'sensors', pid 1992 exited
- <4>[ 11.153371] gandy----goodix_init_panel:index=1
- <6>[ 11.205059] STK831x_SetEnable:0
- <4>[ 11.769722] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0
- <4>[ 24.047026] PHY_PageRead: ecc limit, 0xa, 0x0, 0x0, 0x0
- <6>[ 24.897999] request_suspend_state: wakeup (3->0) at 24884658388 (2014-12-19 13:53:44.112455929 UTC)
- <6>[ 24.940956] STK831x_SetEnable:1
- <6>[ 24.993881] STK831x_ReadByteOTP: read 0x70=0xdc
- <6>[ 24.994719] STK831x_SetEnable:0
- <6>[ 24.995618] STK831x_SetEnable:1
- <6>[ 25.053862] STK831x_ReadByteOTP: read 0x70=0xdc
- <6>[ 25.055123] STK831x_SetEnable:0
- <6>[ 25.056041] STK831x_SetEnable:1
- <6>[ 25.113828] STK831x_ReadByteOTP: read 0x70=0xdc
- <6>[ 27.703689] acc_open
- <6>[ 27.703721] acc_release
- <6>[ 32.039012] init: processing action 0x313c0 (property:sys.boot_completed=1)
- <5>[ 32.039083] init: starting 'preinstall'
- <6>[ 32.039516] init: command 'start' r=0
- <3>[ 32.100148] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
- <6>[ 32.202216] init: waitpid returned pid 2886, status = 00000000
- <5>[ 32.202259] init: process 'preinstall', pid 2886 exited
- <6>[ 32.204958] init: waitpid returned pid 1760, status = 00000000
- <5>[ 32.204992] init: process 'bootanim', pid 1760 exited
- <5>[ 34.794923] CPU2: shutdown
- <6>[ 34.794944] [hotplug]: cpu(3) try to kill cpu(2)
- <6>[ 34.814447] [hotplug]: cpu2 is killed! .
- <5>[ 34.828751] CPU3: shutdown
- <6>[ 34.828772] [hotplug]: cpu(0) try to kill cpu(3)
- <6>[ 34.844497] [hotplug]: cpu3 is killed! .
- <4>[ 35.289650] CPU2: Booted secondary processor
- <6>[ 35.289710] Calibrating delay loop (skipped) already calibrated this CPUCPU3: Booted secondary processor
- <6>[ 35.323394] Calibrating delay loop (skipped) already calibrated this CPU
- <6>[ 35.993399] stk_permission_thread exit, retry=1
- <5>[ 36.475399] CPU2: shutdown
- <6>[ 36.475422] [hotplug]: cpu(3) try to kill cpu(2)
- <6>[ 36.494406] [hotplug]: cpu2 is killed! .
- <5>[ 36.497167] CPU3: shutdown
- <6>[ 36.497190] [hotplug]: cpu(0) try to kill cpu(3)
- <6>[ 36.514390] [hotplug]: cpu3 is killed! .
- <4>[ 36.758529] CPU2: Booted secondary processor
- <6>[ 36.758584] Calibrating delay loop (skipped) already calibrated this CPUCPU3: Booted secondary processor
- <6>[ 36.781178] Calibrating delay loop (skipped) already calibrated this CPU
- <5>[ 46.655118] CPU2: shutdown
- <6>[ 46.655142] [hotplug]: cpu(1) try to kill cpu(2)
- <6>[ 46.674392] [hotplug]: cpu2 is killed! .
- <5>[ 46.677141] CPU3: shutdown
- <6>[ 46.677166] [hotplug]: cpu(0) try to kill cpu(3)
- <6>[ 46.694400] [hotplug]: cpu3 is killed! .
- <4>[ 48.426832] CPU2: Booted secondary processor
- <6>[ 48.426889] Calibrating delay loop (skipped) already calibrated this CPUCPU3: Booted secondary processor
- <6>[ 48.438781] Calibrating delay loop (skipped) already calibrated this CPU
- <4>[ 52.253217] [DISP WRN] file:drivers/video/sun6i/disp/de_bsp/de/disp_layer.c,line:363: all layer resource used!
- <4>[ 52.253732] [pm]valid
- <6>[ 52.253770] request_suspend_state: sleep (0->3) at 52240436942 (2014-12-19 13:54:11.468233649 UTC)
- <6>[ 52.341814] STK831x_SetEnable:0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement