Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- / # dmesg
- <5>[ 0.000000] Linux version 2.6.31.6_SMP_820 (bdietrich@brad-ux) (gcc versi0
- <4>[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7)f
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instructioe
- <4>[ 0.000000] Machine: Oxsemi NAS
- <5>[ 0.000000] 1 memory region
- <4>[ 0.000000] Ignoring unrecognised tag 0x00000000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <7>[ 0.000000] On node 0 totalpages: 32768
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0403040, node_mem_map c040
- <7>[ 0.000000] Normal zone: 256 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total2
- <5>[ 0.000000] Kernel command line: root=ubi0:rootfs ubi.mtd=2,512 rootfstyps
- <4>[ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 0.000000] Memory: 128MB = 128MB total
- <5>[ 0.000000] Memory: 125496KB available (3720K code, 274K data, 124K init,)
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:96
- <4>[ 0.000000] OX820_RPS_init_irq: interrupts 64 to 96
- <4>[ 0.010000] Console: colour dummy device 80x30
- <6>[ 0.010000] console [ttyS0] enabled
- <6>[ 0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
- <6>[ 0.260000] Security Framework initialized
- <4>[ 0.260000] Mount-cache hash table entries: 512
- <6>[ 0.270000] CPU: Testing write buffer coherency: ok
- <6>[ 0.270000] Calibrating local timer... 349.99MHz.
- <4>[ 0.340000] CPU1: Booted secondary processor
- <6>[ 0.440000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
- <6>[ 0.670000] Brought up 2 CPUs
- <6>[ 0.680000] SMP: Total of 2 processors activated (558.69 BogoMIPS).
- <6>[ 0.690000] NET: Registered protocol family 16
- <6>[ 0.690000] Number of DMA channels = 4, version = 4
- <6>[ 0.700000] Reserving a DMA channel for DirectRAID
- <6>[ 0.700000] Allocating 389 SRAM generic DMA descriptors
- <6>[ 1.210000] PCIeA version/deviceID 082510b5
- <6>[ 1.210000] PCIeB version/deviceID 082510b5
- <4>[ 4.240000] ox820_pci_preinit() PCIEB link up timeout (00001814)
- <6>[ 4.240000] ox820_pcie_setup_resources() Enabling PCIe Pre-Emphasis
- <6>[ 4.250000] ox820_pciea_setup_resources() resource c781b2c0
- <6>[ 4.250000] ox820_pciea_setup_resources() io: 0x4a800000 - 0x4afff
- <6>[ 4.260000] ox820_pciea_setup_resources() non-pre: 0x48000000 - 0x497ff
- <6>[ 4.270000] ox820_pciea_setup_resources() pre: 0x49800000 - 0x4a7ff
- <7>[ 4.270000] pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
- <6>[ 4.270000] PCI: bus0: Fast back to back transfers disabled
- <6>[ 4.280000] PCI: bus1: Fast back to back transfers enabled
- <4>[ 4.300000] bio: create slab <bio-0> at 0
- <5>[ 4.300000] SCSI subsystem initialized
- <7>[ 4.310000] libata version 3.00 loaded.
- <6>[ 4.330000] NET: Registered protocol family 2
- <6>[ 4.330000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- <6>[ 4.340000] Switched to NOHz mode on CPU #0
- <6>[ 4.340000] TCP established hash table entries: 4096 (order: 3, 32768 byt)
- <6>[ 4.340000] Switched to NOHz mode on CPU #1
- <6>[ 4.350000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 4.360000] TCP: Hash tables configured (established 4096 bind 4096)
- <6>[ 4.360000] TCP reno registered
- <6>[ 4.370000] NET: Registered protocol family 1
- <4>[ 4.370000] Create fragment cache
- <6>[ 4.380000] fuse init (API version 7.12)
- <6>[ 4.380000] msgmni has been set to 245
- <6>[ 4.390000] alg: No test for stdrng (krng)
- <6>[ 4.390000] io scheduler noop registered
- <6>[ 4.400000] io scheduler anticipatory registered
- <6>[ 4.400000] io scheduler deadline registered
- <6>[ 4.410000] io scheduler cfq registered (default)
- <6>[ 4.430000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- <6>[ 4.440000] serial8250: ttyS0 at MMIO 0x44200000 (irq = 55) is a 16550A
- <6>[ 4.460000] brd: module loaded
- <6>[ 4.460000] loop: module loaded
- <6>[ 4.470000] ox820sata: OX820 sata core.
- <6>[ 4.470000] scsi0 : oxnassata
- <6>[ 4.480000] scsi1 : oxnassata
- <6>[ 4.480000] ata1: SATA max UDMA/133 irq 50
- <6>[ 4.480000] ata2: SATA max UDMA/133 irq 50
- <3>[ 4.490000] ox820sata: reseting SATA core
- <6>[ 4.850000] ata1: SATA link down (SStatus 0 SControl 300)
- <3>[ 4.850000] ox820sata: reseting SATA core
- <6>[ 5.210000] ata2: SATA link down (SStatus 0 SControl 300)
- <6>[ 5.210000] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 5.220000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 5.220000] NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND)
- <6>[ 5.230000] Scanning device for bad blocks
- <5>[ 5.310000] Creating 2 MTD partitions on "NAND 128MiB 3,3V 8-bit":
- <5>[ 5.310000] 0x000000000000-0x000000e00000 : "boot"
- <5>[ 5.320000] 0x000000e00000-0x000008000000 : "rootfs"
- <5>[ 5.330000] UBI: attaching mtd2 to ubi0
- <5>[ 5.330000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
- <5>[ 5.340000] UBI: logical eraseblock size: 129024 bytes
- <5>[ 5.340000] UBI: smallest flash I/O unit: 2048
- <5>[ 5.350000] UBI: sub-page size: 512
- <5>[ 5.350000] UBI: VID header offset: 512 (aligned 512)
- <5>[ 5.360000] UBI: data offset: 2048
- <5>[ 5.770000] UBI: attached mtd2 to ubi0
- <5>[ 5.770000] UBI: MTD device name: "rootfs"
- <5>[ 5.780000] UBI: MTD device size: 114 MiB
- <5>[ 5.780000] UBI: number of good PEBs: 912
- <5>[ 5.780000] UBI: number of bad PEBs: 0
- <5>[ 5.790000] UBI: max. allowed volumes: 128
- <5>[ 5.790000] UBI: wear-leveling threshold: 4096
- <5>[ 5.800000] UBI: number of internal volumes: 1
- <5>[ 5.800000] UBI: number of user volumes: 1
- <5>[ 5.810000] UBI: available PEBs: 0
- <5>[ 5.810000] UBI: total number of reserved PEBs: 912
- <5>[ 5.820000] UBI: number of PEBs reserved for bad PEB handling: 9
- <5>[ 5.820000] UBI: max/mean erase counter: 2/1
- <5>[ 5.830000] UBI: image sequence number: 0
- <5>[ 5.830000] UBI: background thread "ubi_bgt0d" started, PID 278
- <6>[ 5.840000] mice: PS/2 mouse device common for all mice
- <6>[ 5.840000] TCP cubic registered
- <6>[ 5.850000] NET: Registered protocol family 10
- <6>[ 5.850000] NET: Registered protocol family 17
- <6>[ 5.860000] RPC: Registered udp transport module.
- <6>[ 5.860000] RPC: Registered tcp transport module.
- <5>[ 5.990000] UBIFS: recovery needed
- <5>[ 6.160000] UBIFS: recovery completed
- <5>[ 6.170000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- <5>[ 6.170000] UBIFS: file system size: 114573312 bytes (111888 KiB, 109 M)
- <5>[ 6.180000] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71)
- <5>[ 6.190000] UBIFS: media format: w4/r0 (latest is w4/r0)
- <5>[ 6.200000] UBIFS: default compressor: zlib
- <5>[ 6.200000] UBIFS: reserved for root: 0 bytes (0 KiB)
- <4>[ 6.210000] VFS: Mounted root (ubifs filesystem) on device 0:10.
- <6>[ 6.210000] Freeing init memory: 124K
- <4>[ 7.120000] gmac_phy_init() invoked
- <5>[ 7.120000] Probing for Synopsis GMAC, unit 0
- <6>[ 7.130000] eth0: Tuning GMAC 0 RGMII timings
- <6>[ 7.140000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
- <5>[ 7.150000] eth0: GMAC ver = 53, vendor ver = 18 at 0xe1400000, IRQ 40
- <5>[ 7.150000] eth0: Found PHY at address 3, type 0x001cc914 -> 10/100/1000
- <5>[ 7.160000] eth0: Ethernet addr: 00:30:e0:00:00:00
- <4>[ 7.670000] PCI: enabling device 0000:00:00.0 (0140 -> 0142)
- <4>[ 7.670000]
- <4>[ 7.670000]
- <4>[ 7.670000] === pAd = e0aee000, size = 516032 ===
- <4>[ 7.670000]
- <4>[ 7.680000] <-- RTMPAllocAdapterBlock, Status=0
- <4>[ 7.690000] pAd->CSRBaseAddress =0xe9000000, csr_addr=0xe9000000!
- <6>[ 7.770000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
- <6>[ 7.770000] Offload is not active on eth0
- <6>[ 7.770000] Alloc'ing ARM descs 10240 bytes
- <6>[ 7.780000] eth0: Resetting GMAC
- <6>[ 7.780000] eth0: GMAC reset complete
- <6>[ 7.790000] eth0: Setting Rx flow control thresholds for LAN port
- <6>[ 8.340000] eth0: PHY is Realtek RTL8211D, type 0x001cc914
- <6>[ 8.840000] eth0: link down
- <4>[ 17.630000] RX DESC ffc13000 size = 2048
- <4>[ 17.640000] <-- RTMPAllocTxRxRingMemory, Status=0
- <4>[ 17.830000] 1. Phy Mode = 0
- <4>[ 17.830000] 2. Phy Mode = 0
- <4>[ 17.830000] NVM is Efuse and its size =2d[2d0-2fc]
- <4>[ 17.840000] RTMPSetPhyMode: channel is out of range, use first channel=1
- <4>[ 17.850000] 3. Phy Mode = 0
- <4>[ 17.910000] MCS Set = 00 00 00 00 00
- <4>[ 17.920000] <==== rt28xx_init, Status=0
- <4>[ 17.920000] 0x1300 = 00073200
- <4>[ 17.920000] AUX_CTRL = 0x 4c02
- <4>[ 17.930000] Read AUX_CTRL = 0x4c02
- <4>[ 17.930000] Write AUX_CTRL = 0x5c02
- <4>[ 17.940000] OSC_CTRL = 0x3ff11
- <4>[ 17.940000] ====> rt30xx Read PowerLevelMode = 0x3.
- <4>[ 17.950000] ====> rt30xx F Write 0x83 Command = 0x3.
- <6>[ 18.130000] usbcore: registered new interface driver usbfs
- <6>[ 18.150000] usbcore: registered new interface driver hub
- <6>[ 18.150000] usbcore: registered new device driver usb
- <6>[ 18.200000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 18.210000] oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
- <6>[ 18.220000] oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus1
- <6>[ 18.250000] oxnas-ehci oxnas-ehci.0: irq 39, io mem 0x00000000
- <6>[ 18.270000] oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00
- <6>[ 18.270000] usb usb1: configuration #1 chosen from 1 choice
- <6>[ 18.280000] hub 1-0:1.0: USB hub found
- <6>[ 18.280000] hub 1-0:1.0: 2 ports detected
- <6>[ 18.380000] Initializing USB Mass Storage driver...
- <6>[ 18.380000] usbcore: registered new interface driver usb-storage
- <6>[ 18.390000] USB Mass Storage support registered.
- <7>[ 18.520000] eth0: no IPv6 routers present
- <6>[ 18.610000] usb 1-1: new high speed USB device using oxnas-ehci and addre2
- <6>[ 18.760000] usb 1-1: configuration #1 chosen from 1 choice
- <6>[ 18.770000] hub 1-1:1.0: USB hub found
- <6>[ 18.770000] hub 1-1:1.0: 4 ports detected
- <4>[ 18.800000] ufsd: module license 'Commercial product' taints kernel.
- <4>[ 18.800000] Disabling lock debugging due to kernel taint
- <5>[ 18.840000] ufsd: driver 8.1 (033_A) LBD=OFF with ioctl loaded at bf17a000
- <5>[ 18.840000] NTFS read/write support included
- <5>[ 18.840000] Hfs+/HfsX read/write support included
- <4>[ 18.880000] Cloud Engines XCE Init [Version: 2.4.9.6]
- <6>[ 18.890000] XCE: CPU MEMORY MAP:
- <6>[ 18.890000] XCE: -- 0x00001000 - 0xbeffffff (3055 MB) User Space Mappis
- <6>[ 18.900000] XCE: -- 0xbf000000 - 0xbfffffff ( 16 MB) Kernel module spe
- <6>[ 18.900000] XCE: -- 0xc0000000 - 0xc7ffffff ( 128 MB) Kernel direct-mam
- <6>[ 18.910000] XCE: -- 0xe0800000 - 0xe0ffffff ( 8 MB) Kernel vmalloc se
- <6>[ 18.920000] XCE: -- 0xe1000000 - 0xfeffffff ( 479 MB) Kernel platform e
- <6>[ 18.930000] XCE: CPU FEATURES:
- <6>[ 18.930000] XCE: -- I Cache: enabled
- <6>[ 18.930000] XCE: -- D Cache: enabled
- <6>[ 18.940000] XCE: -- Branch Predict: disabled
- <6>[ 18.940000] XCE: -- MMU: enabled
- <6>[ 18.950000] XCE: -- Alignment Abort: disabled
- <6>[ 18.960000] XCE: BLPARAMS: Locating parameter block...
- <6>[ 18.960000] XCE: BLPARAMS: reading 2048 bytes @ a0000
- <6>[ 18.970000] XCE: Loaded Property Size: 2048
- <6>[ 18.970000] XCE: - 'cesvcid' -> 'XGGSUAPTUHXEMVZY64AA2FPSRA'
- <6>[ 18.980000] XCE: - 'ceboardver' -> 'PPRO1'
- <6>[ 18.980000] XCE: Current GPIO State:
- <6>[ 18.980000] XCE: GPIO A input: 0xf679fff7
- <6>[ 18.990000] XCE: GPIO A OE status: 0x00000000
- <6>[ 18.990000] XCE: GPIO A IRQ enable: 0x00000000
- <6>[ 19.000000] XCE: GPIO A IRQ event: 0x00000000
- <6>[ 19.000000] XCE: GPIO A output state: 0x00000000
- <6>[ 19.010000] XCE: GPIO B input: 0x0003bfff
- <6>[ 19.010000] XCE: GPIO B OE status: 0x00030000
- <6>[ 19.020000] XCE: GPIO B IRQ enable: 0x00000000
- <6>[ 19.020000] XCE: GPIO B IRQ event: 0x00000000
- <6>[ 19.030000] XCE: GPIO B output state: 0x00030000
- <6>[ 19.140000] XCE: BLPARAMS: Locating parameter block...
- <6>[ 19.150000] XCE: BLPARAMS: reading 2048 bytes @ a0000
- <6>[ 19.150000] XCE: BLPARAMS: reading 2048 bytes @ a0800
- <6>[ 19.160000] XCE: BLPARAMS: reading 2048 bytes @ a1000
- <6>[ 19.170000] XCE: BLPARAMS: reading 2048 bytes @ a1800
- <6>[ 24.580000] XCE: XCE: LED -> DISCONNECTED
- <4>[ 24.670000] rt28xx_close call RT28xxPciAsicRadioOff fail !!
- <4>[ 24.680000] RX DESC ffc13000 size = 2048
- <4>[ 24.690000] <-- RTMPAllocTxRxRingMemory, Status=0
- <4>[ 24.880000] 1. Phy Mode = 0
- <4>[ 24.880000] 2. Phy Mode = 0
- <4>[ 24.880000] NVM is Efuse and its size =2d[2d0-2fc]
- <4>[ 24.890000] 3. Phy Mode = 0
- <4>[ 24.940000] MCS Set = 00 00 00 00 00
- <4>[ 24.940000] <==== rt28xx_init, Status=0
- <4>[ 24.950000] 0x1300 = 00073200
- <4>[ 24.950000] AUX_CTRL = 0x 5d42
- <4>[ 24.950000] Read AUX_CTRL = 0x5d42
- <4>[ 24.960000] Write AUX_CTRL = 0x5d42
- <4>[ 24.960000] OSC_CTRL = 0x3ff11
- <4>[ 24.970000] ====> rt30xx Read PowerLevelMode = 0x3.
- <4>[ 24.970000] ====> rt30xx F Write 0x83 Command = 0x3.
- <6>[ 30.170000] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks
- <6>[ 33.120000] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks
- <7>[ 34.990000] ra0: no IPv6 routers present
- <6>[ 111.620000] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks
- <4>[ 111.660000] ttyS0: 1 input overrun(s)
- <6>[ 112.620000] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks
- <6>[ 114.650000] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks
- <6>[ 118.470000] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks
- <6>[ 122.800000] SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement