API tools faq
paste
Advertisement
Guest User

Hc

a guest
Apr 9th, 2016
92
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 40.92 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-Bricked-TWRP-Edition-g27406e9-05626-gc3e7a05 (showp1984@jarvis) (gcc version 4.7.2 20120910 (prerelease) (Linaro GCC 4.7-2012.09) ) #1 SMP PREEMPT Sat Nov 2 21:45:13 CET 2013
  4. [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: QCT APQ8064 MAKO
  7. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  8. [ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  9. [ 0.000000] Initialized persistent memory from 88700000-887fffff
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] smem_find(137, 80): wrong size 72
  12. [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  13. [ 0.000000] accessory_chip=0 hw_plat_subtype=1
  14. [ 0.000000] allocating 21626880 bytes at c2832000 (82a32000 physical) for fb
  15. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c3cd5000 s16256 r8192 d12416 u36864
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 488963
  17. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 user_debug=31 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=mode_reset gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 androidboot.emmc=true androidboot.serialno=<private info omitted> androidboot.bootloader=MAKOZ30f androidboot.baseband=mdm bootreason=recovery
  18. [ 0.000000] UART CONSOLE : enable
  19. [ 0.000000] kcal is 0|0|0|x
  20. [ 0.000000] kcal not calibrated yet : 120
  21. [ 0.000000] set to default : 255
  22. [ 0.000000] BOARD : LGE input rev_11
  23. [ 0.000000] BOARD : LGE matched rev_11
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1456MB = 1925MB total
  28. [ 0.000000] Memory: 1909732k/1992676k available, 62488k reserved, 1286140K highmem
  29. [ 0.000000] Virtual kernel memory layout:
  30. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .text : 0xc0008000 - 0xc0d387d0 (13506 kB)
  37. [ 0.000000] .init : 0xc0e00000 - 0xc0f03f80 (1040 kB)
  38. [ 0.000000] .data : 0xc0f04000 - 0xc0ff13b4 ( 949 kB)
  39. [ 0.000000] .bss : 0xc0ff13f4 - 0xc1270bcc (2558 kB)
  40. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [ 0.000000] Preemptible hierarchical RCU implementation.
  42. [ 0.000000] NR_IRQS:921
  43. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  44. [ 0.000000] Console: colour dummy device 80x30
  45. [ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  46. [ 0.000183] pid_max: default: 32768 minimum: 301
  47. [ 0.000427] Security Framework initialized
  48. [ 0.000457] SELinux: Initializing.
  49. [ 0.000610] Mount-cache hash table entries: 512
  50. [ 0.001831] Initializing cgroup subsys debug
  51. [ 0.001861] Initializing cgroup subsys cpuacct
  52. [ 0.001861] Initializing cgroup subsys freezer
  53. [ 0.001983] CPU: Testing write buffer coherency: ok
  54. [ 0.002258] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  55. [ 0.002258] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  56. [ 0.002350] Setting up static identity map for 0x80baa568 - 0x80baa5f0
  57. [ 0.005615] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  58. [ 0.008026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  59. [ 0.010468] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  60. [ 0.010590] Brought up 4 CPUs
  61. [ 0.010590] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  62. [ 0.024477] dummy:
  63. [ 0.024874] NET: Registered protocol family 16
  64. [ 0.025423] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  65. [ 0.027590] meminfo_init: smem ram ptable found: ver: 0 len: 6
  66. [ 0.027590] Found 2 memory banks grouped into 16 memory regions
  67. [ 0.027804] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  68. [ 0.028567] smem_find(137, 80): wrong size 72
  69. [ 0.028597] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  70. [ 0.028597] accessory_chip=0 hw_plat_subtype=1
  71. [ 0.028719] msm_rpm_init: RPM firmware 3.0.16842886
  72. [ 0.048496] msm_rpm_get_status(): Status id 433 not defined for target
  73. [ 0.048496] msm_rpm_get_status(): Status id 433 not defined for target
  74. [ 0.048527] msm_rpm_get_status(): Status id 433 not defined for target
  75. [ 0.048527] msm_rpm_get_status(): Status id 433 not defined for target
  76. [ 0.048557] msm_rpm_get_status(): Status id 433 not defined for target
  77. [ 0.048557] msm_rpm_get_status(): Status id 433 not defined for target
  78. [ 0.048557] msm_rpm_get_status(): Status id 433 not defined for target
  79. [ 0.048588] msm_rpm_get_status(): Status id 433 not defined for target
  80. [ 0.066595] pm8921_probe: PMIC revision 1: F4
  81. [ 0.066625] pm8921_probe: PMIC revision 2: 06
  82. [ 0.066625] pm8921_probe: PMIC version: PM8921 rev 3.0
  83. [ 0.066625] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  84. [ 0.067755] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  85. [ 0.068243] pm_gpio_probe: OK: base=152, ngpio=44
  86. [ 0.068548] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  87. [ 0.068609] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  88. [ 0.070685] pm8821_probe: PMIC revision 1: PM8821 rev F3
  89. [ 0.070715] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  90. [ 0.070715] pm8821_probe: PMIC version: PM8821 ver 2.1
  91. [ 0.071295] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  92. [ 0.071326] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  93. [ 0.071875] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  94. [ 0.073126] saw_probe: id=0, name=8921_s5
  95. [ 0.073462] saw_probe: id=1, name=8921_s6
  96. [ 0.073798] saw_probe: id=2, name=8821_s0
  97. [ 0.074164] saw_probe: id=3, name=8821_s1
  98. [ 0.082923] persistent_ram: found existing buffer, size 225700, start 58346
  99. [ 0.706271] console [ram-1] enabled
  100. [ 0.707706] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  101. [ 0.707797] [DEBUG] uart_enable : 1
  102. [ 0.710331] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  103. [ 0.711551] ------------[ cut here ]------------
  104. [ 0.711643] WARNING: at arch/arm/mach-msm/subsystem_restart.c:617 subsys_restart_init+0xdc/0x114()
  105. [ 0.711796] Modules linked in:
  106. [ 0.712040] [<c0017100>] (unwind_backtrace+0x0/0xf8) from [<c00948d0>] (warn_slowpath_null+0x38/0xa8)
  107. [ 0.712162] [<c00948d0>] (warn_slowpath_null+0x38/0xa8) from [<c0e0bb30>] (subsys_restart_init+0xdc/0x114)
  108. [ 0.712314] [<c0e0bb30>] (subsys_restart_init+0xdc/0x114) from [<c00088e8>] (do_one_initcall+0x10c/0x170)
  109. [ 0.712498] ---[ end trace da227214a82491b7 ]---
  110. [ 0.714939] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  111. [ 0.715092] sps:BAM 0x12244000 is registered.
  112. [ 0.715641] sps:sps is ready.
  113. [ 0.744483] bio: create slab <bio-0> at 0
  114. [ 0.745154] ION heap vmalloc created
  115. [ 0.745276] ION heap mm created at a0000000 with size 3800000
  116. [ 0.745460] ION heap mm_fw created at 9fe00000 with size 1e0000
  117. [ 0.745551] ION heap mfc created at a3800000 with size 2000
  118. [ 0.745734] ION heap iommu created
  119. [ 0.745856] ION heap qsecom created at fea07000 with size 780000
  120. [ 0.746039] ION heap audio created at ff187000 with size 4cf000
  121. [ 0.747321] pm8xxx_pwm_probe: OK
  122. [ 0.748054] SCSI subsystem initialized
  123. [ 0.748512] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  124. [ 0.748573] sps:BAM 0x28084000 is registered.
  125. [ 0.749488] usbcore: registered new interface driver usbfs
  126. [ 0.749763] usbcore: registered new interface driver hub
  127. [ 0.750038] usbcore: registered new device driver usb
  128. [ 0.750434] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  129. [ 0.751350] Linux media interface: v0.10
  130. [ 0.751503] Linux video capture interface: v2.00
  131. [ 0.753822] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  132. [ 0.754036] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  133. [ 0.754311] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  134. [ 0.754555] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  135. [ 0.754768] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  136. [ 0.755012] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  137. [ 0.755226] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  138. [ 0.755470] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  139. [ 0.755745] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  140. [ 0.755959] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  141. [ 0.756203] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  142. [ 0.756508] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  143. [ 0.756996] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  144. [ 0.757301] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  145. [ 0.757515] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  146. [ 0.757820] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  147. [ 0.758126] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  148. [ 0.758370] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  149. [ 0.758675] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  150. [ 0.758950] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  151. [ 0.759163] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  152. [ 0.759438] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  153. [ 0.759713] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  154. [ 0.759987] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  155. [ 0.760262] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  156. [ 0.760537] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  157. [ 0.760842] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  158. [ 0.761147] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  159. [ 0.761483] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  160. [ 0.761757] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  161. [ 0.761971] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  162. [ 0.762337] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  163. [ 0.762704] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  164. [ 0.762917] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  165. [ 0.763192] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  166. [ 0.763375] Advanced Linux Sound Architecture Driver Version 1.0.25.
  167. [ 0.764047] Bluetooth: Core ver 2.16
  168. [ 0.764199] NET: Registered protocol family 31
  169. [ 0.764352] Bluetooth: HCI device and connection manager initialized
  170. [ 0.764443] Bluetooth: HCI socket layer initialized
  171. [ 0.764596] Bluetooth: L2CAP socket layer initialized
  172. [ 0.764901] Bluetooth: SCO socket layer initialized
  173. [ 0.765298] cfg80211: Calling CRDA to update world regulatory domain
  174. [ 0.765481] cfg80211: World regulatory domain updated:
  175. [ 0.765542] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  176. [ 0.765695] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  177. [ 0.765847] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  178. [ 0.766000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  179. [ 0.766091] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  180. [ 0.766213] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  181. [ 0.767007] earjack debugger probed
  182. [ 0.767526] Switching to clocksource gp_timer
  183. [ 0.803082] NET: Registered protocol family 2
  184. [ 0.803479] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  185. [ 0.804150] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  186. [ 0.805524] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  187. [ 0.806317] TCP: Hash tables configured (established 131072 bind 65536)
  188. [ 0.806409] TCP: reno registered
  189. [ 0.806500] UDP hash table entries: 512 (order: 2, 16384 bytes)
  190. [ 0.806653] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  191. [ 0.807141] NET: Registered protocol family 1
  192. [ 0.807569] Trying to unpack rootfs image as initramfs...
  193. [ 1.128979] Freeing initrd memory: 4292K
  194. [ 1.130169] Detected 5 counters on the L2CC PMU.
  195. [ 1.132397] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  196. [ 1.134137] pil_riva pil_riva: using secure boot
  197. [ 1.137189] pil_dsps pil_dsps: using secure boot
  198. [ 1.138715] pil_gss pil_gss: using secure boot
  199. [ 1.140973] smd_channel_probe_worker: allocation table not initialized
  200. [ 1.146833] msm_dsps driver version 4.03.
  201. [ 1.148420] NET: Registered protocol family 27
  202. [ 1.152632] lpass_fatal_init: lpass SSR driver init'ed.
  203. [ 1.153090] wcnss_8960: module initialized
  204. [ 1.153639] gss_8064_init: gss fatal driver init'ed.
  205. [ 1.154494] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
  206. [ 1.154707] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
  207. [ 1.157301] acpuclk-8064 acpuclk-8064: CPU0: 15 frequencies supported
  208. [ 1.157454] acpuclk-8064 acpuclk-8064: CPU1: 15 frequencies supported
  209. [ 1.157546] acpuclk-8064 acpuclk-8064: CPU2: 15 frequencies supported
  210. [ 1.157698] acpuclk-8064 acpuclk-8064: CPU3: 15 frequencies supported
  211. [ 1.158431] kcal_ctrl_init
  212. [ 1.158980] persistent_ram: no valid data in buffer (sig = 0x4e4f524d)
  213. [ 1.160018] msm_rpm_log_probe: OK
  214. [ 1.162978] mdm_modem_probe: registered mdm id 0
  215. [ 1.163070] mdm_do_first_power_on:id 0: Powering on modem for the first time
  216. [ 1.192125] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:1 report inf element:0x400
  217. [ 1.192217] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
  218. [ 1.238974] mdm_pblrdy_change: mdm id 0: pbl ready:1
  219. [ 1.449015] usbcore: registered new interface driver hsic_sysmon
  220. [ 1.449534] audit: initializing netlink socket (disabled)
  221. [ 1.449656] type=2000 audit(1.440:1): initialized
  222. [ 1.566122] highmem bounce pool size: 64 pages
  223. [ 1.575522] NTFS driver 2.1.30 [Flags: R/W].
  224. [ 1.575980] fuse init (API version 7.18)
  225. [ 1.576468] msgmni has been set to 1226
  226. [ 1.580314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  227. [ 1.580619] io scheduler noop registered
  228. [ 1.580802] io scheduler deadline registered
  229. [ 1.581474] io scheduler cfq registered (default)
  230. [ 1.582572] lm3530 probed
  231. [ 1.586265] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
  232. [ 1.586601] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00f8000
  233. [ 1.587852] mipi_lgit_lcd_probe start
  234. [ 1.588219] setting pdata->panel_info.fb_num to 3. type: 8
  235. [ 1.600427] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  236. [ 1.600763] load_565rle_image: Can not open /initlogo.rle
  237. [ 1.602594] setting pdata->panel_info.fb_num to 1. type: 7
  238. [ 1.603754] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  239. [ 1.603967] load_565rle_image: Can not open /initlogo.rle
  240. [ 1.604517] mdp4_dtv_vsync_init: ndx=0
  241. [ 1.604730] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf94d408
  242. [ 1.604913] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  243. [ 1.605646] setting pdata->panel_info.fb_num to 1. type: 10
  244. [ 1.606012] Inside writeback_driver_init
  245. [ 1.606348] Inside writeback_probe
  246. [ 1.607172] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  247. [ 1.607416] load_565rle_image: Can not open /initlogo.rle
  248. [ 1.609125]
  249. [ 1.609156] msm_vidc_enc: Inside vid_enc_init()
  250. [ 1.609552]
  251. [ 1.609552] msm_vidc_enc: Inside vid_enc_vcd_init()
  252. [ 1.610468] smux_init: unable to create log context
  253. [ 1.611323] msm_serial_hs module loaded
  254. [ 1.611719] msm_serial_hsl: detected port #0
  255. [ 1.611963] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  256. [ 1.612177] msm_serial_hsl: console setup on port #0
  257. [ 1.612452] console [ttyHSL0] enabled
  258. [ 1.612818] msm_serial_hsl: driver initialized
  259. [ 1.614466] msm_rotator_probe: rotator_hw_revision=2
  260. [ 1.618037] diagchar initialized now
  261. [ 1.619777] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  262. [ 1.629024] brd: module loaded
  263. [ 1.633175] loop: module loaded
  264. [ 1.635617] anx7808 init gpio
  265. [ 1.668182] anx7808 dvdd is already on
  266. [ 1.698184] sp_tx_hardware_poweron: anx7808 power on
  267. [ 1.699221] sp_tx_chip_located: ANX7808 BA is found.
  268. [ 1.700564] sp_tx_vbus_powerdown: 3.3V output disabled
  269. [ 1.758187] sp_tx_hardware_powerdown: anx7808 power down
  270. [ 1.758278] sp_tx_set_sys_state: SP_TX To System State:
  271. [ 1.758431] sp_tx_set_sys_state: STATE_CABLE_PLUG
  272. [ 1.759041] tabla2x-slim tabla2x-slim: Platform data from board file
  273. [ 1.825820] wcd9xxx_check_codec_type: codec is tabla_codec
  274. [ 1.826003] wcd9xxx_check_codec_type: Read codec idbytes & version
  275. [ 1.826003] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  276. [ 1.826033] byte_3[00000001] version = 2
  277. [ 1.828200] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  278. [ 1.828536] i2c-core: driver [tabla-i2c-core] using legacy resume method
  279. [ 1.830001] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  280. [ 1.830398] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  281. [ 1.830825] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  282. [ 1.831832] SCSI Media Changer driver v0.25
  283. [ 1.833816] rmnet_init: BAM devices[8]
  284. [ 1.857622] PPP generic driver version 2.4.2
  285. [ 1.858202] PPP BSD Compression module registered
  286. [ 1.858446] PPP Deflate Compression module registered
  287. [ 1.860033] modprobe (109): undefined instruction: pc=b6f2350a
  288. [ 1.860338] Code: 9004 e000 4691 efc0 (0010) 69e8
  289. [ 1.861986] modprobe (111): undefined instruction: pc=b6ef550a
  290. [ 1.862322] Code: 9004 e000 4691 efc0 (0010) 69e8
  291. [ 1.863268] PPP MPPE Compression module registered
  292. [ 1.863604] NET: Registered protocol family 24
  293. [ 1.863848] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  294. [ 1.864184] CSLIP: code copyright 1989 Regents of the University of California.
  295. [ 1.864703] wcnss_wlan probed in built-in mode
  296. [ 1.866412] usbcore: registered new interface driver asix
  297. [ 1.866748] usbcore: registered new interface driver cdc_ether
  298. [ 1.867175] usbcore: registered new interface driver net1080
  299. [ 1.867480] usbcore: registered new interface driver cdc_subset
  300. [ 1.867907] usbcore: registered new interface driver zaurus
  301. [ 1.868457] usbcore: registered new interface driver cdc_ncm
  302. [ 1.868945] msm_otg msm_otg: msm_otg probe
  303. [ 1.869159] msm_otg msm_otg: failed to get phy_clk
  304. [ 1.869555] msm_otg msm_otg: OTG regs = f01f2000
  305. [ 1.872333] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  306. [ 1.885670] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  307. [ 1.885792] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  308. [ 1.908255] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  309. [ 1.928246] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  310. [ 1.928612] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  311. [ 1.928765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  312. [ 1.928857] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  313. [ 1.929009] usb usb1: Manufacturer: Linux 3.4.0-Bricked-TWRP-Edition-g27406e9-05626-gc3e7a05 ehci_hcd
  314. [ 1.929162] usb usb1: SerialNumber: msm_hsic_host
  315. [ 1.929711] hub 1-0:1.0: USB hub found
  316. [ 1.929894] hub 1-0:1.0: 1 port detected
  317. [ 1.931207] usbcore: registered new interface driver cdc_acm
  318. [ 1.931298] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  319. [ 1.931451] Initializing USB Mass Storage driver...
  320. [ 1.931725] usbcore: registered new interface driver usb-storage
  321. [ 1.931817] USB Mass Storage support registered.
  322. [ 1.932061] usbcore: registered new interface driver ums-alauda
  323. [ 1.932214] usbcore: registered new interface driver ums-cypress
  324. [ 1.932458] usbcore: registered new interface driver ums-datafab
  325. [ 1.932641] usbcore: registered new interface driver ums-freecom
  326. [ 1.932855] usbcore: registered new interface driver ums-isd200
  327. [ 1.933007] usbcore: registered new interface driver ums-jumpshot
  328. [ 1.933251] usbcore: registered new interface driver ums-karma
  329. [ 1.933435] usbcore: registered new interface driver ums-onetouch
  330. [ 1.933648] usbcore: registered new interface driver ums-sddr09
  331. [ 1.933831] usbcore: registered new interface driver ums-sddr55
  332. [ 1.934045] usbcore: registered new interface driver ums-usbat
  333. [ 1.934320] usbcore: registered new interface driver usbserial
  334. [ 1.934472] usbserial: USB Serial Driver core
  335. [ 1.934625] usbcore: registered new interface driver qc_csvt
  336. [ 1.934839] USB Serial support registered for qc_csvt
  337. [ 1.935022] usbcore: registered new interface driver usb_ehset_test
  338. [ 1.935266] usbcore: registered new interface driver diag_bridge
  339. [ 1.935632] usbcore: registered new interface driver mdm_bridge
  340. [ 1.936609] usbcore: registered new interface driver ks_bridge
  341. [ 1.936700] ksb_init: init done
  342. [ 1.937158] msm_otg msm_otg: phy_reset: success
  343. [ 1.937952] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  344. [ 1.938287] mbim_init: initialize 1 instances
  345. [ 1.938501] mbim_init: Initialized 1 ports
  346. [ 1.940546] rndis_qc_init: initialize rndis QC instance
  347. [ 1.941065] android_usb gadget: Mass Storage Function, version: 2009/09/11
  348. [ 1.941156] android_usb gadget: Number of LUNs=1
  349. [ 1.941309] lun0: LUN: removable file: (no medium)
  350. [ 1.941767] android_usb gadget: android_usb ready
  351. [ 1.943323] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  352. [ 1.944208] [Touch D]touch enable
  353. [ 2.148451] input: touch_dev as /devices/virtual/input/input2
  354. [ 2.170517] [Touch] common[1] finger[17] flash[52] button[0]
  355. [ 2.171707] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E028.
  356. [ 2.173630] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
  357. [ 2.173721] [Touch] Touch driver is initialized
  358. [ 2.174240] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  359. [ 2.175217] using rtc device, pm8xxx_rtc, for alarms
  360. [ 2.175339] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  361. [ 2.175980] i2c /dev entries driver
  362. [ 2.176529] usbcore: registered new interface driver uvcvideo
  363. [ 2.176712] USB Video Class driver (1.1.1)
  364. [ 2.177964] __jrchoi: msm_sensor_init_module: E
  365. [ 2.206287] msm_eeprom_probe probe_fail
  366. [ 2.206714] msm_server_update_sensor_info mctl_node_name[0] = video1
  367. [ 2.235067] msm_eeprom_probe probe_fail
  368. [ 2.235556] msm_server_update_sensor_info mctl_node_name[1] = video3
  369. [ 2.239523] msm_cam_server_request_irq IRQ Router hw is not present.
  370. [ 2.240286] lm3559_init
  371. [ 2.246787] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-<email omitted>
  372. [ 2.247367] cpuidle: using governor ladder
  373. [ 2.247459] cpuidle: using governor menu
  374. [ 2.247978] mmc0: SDCC Version: 0x0000001a
  375. [ 2.249351] mmc0: bam physical base=0x12402000
  376. [ 2.249443] mmc0: bam virtual base=0xf0320000
  377. [ 2.249595] sps:BAM 0x12402000 is registered.
  378. [ 2.249687] mmc0: BAM device registered. bam_handle=0xef02fe00
  379. [ 2.250083] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  380. [ 2.250572] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  381. [ 2.250846] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  382. [ 2.250969] mmc0: No card detect facilities available
  383. [ 2.252891] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  384. [ 2.252983] mmc0: Controller capabilities: 0x0000039e
  385. [ 2.253135] mmc0: 8 bit data mode enabled
  386. [ 2.253227] mmc0: 4 bit data mode disabled
  387. [ 2.253380] mmc0: polling status mode disabled
  388. [ 2.253502] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  389. [ 2.253593] mmc0: Slot eject status = 0
  390. [ 2.253715] mmc0: Power save feature enable = 1
  391. [ 2.253807] mmc0: SPS-BAM data transfer mode available
  392. [ 2.254814] usbcore: registered new interface driver usbhid
  393. [ 2.254906] usbhid: USB HID core driver
  394. [ 2.255821] ashmem: initialized
  395. [ 2.256065] logger: created 256K log 'log_main'
  396. [ 2.256249] logger: created 256K log 'log_events'
  397. [ 2.256554] logger: created 256K log 'log_radio'
  398. [ 2.256737] logger: created 256K log 'log_system'
  399. [ 2.257561] usbcore: registered new interface driver snd-usb-audio
  400. [ 2.259331] tabla_probe
  401. [ 2.260186] amp_enable: amp enable bypass(2)
  402. [ 2.260369] amp_enable: AMP_EN is set to 0
  403. [ 2.261498] msm_pcm_probe: dev name msm-voip-dsp
  404. [ 2.261925] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  405. [ 2.262108] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  406. [ 2.263329] msm_pcm_probe: dev name msm-pcm-dsp
  407. [ 2.263818] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  408. [ 2.264245] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  409. [ 2.264397] adding pm_qos request in low latency driver
  410. [ 2.264489] done adding pm_qos request in low latency driver
  411. [ 2.265649] msm_compr_probe: dev name msm-compr-dsp
  412. [ 2.266381] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  413. [ 2.267602] msm8930_audio_init: Not the right machine type
  414. [ 2.267694] msm_audio_init: Not the right machine type
  415. [ 2.267785] msm_audio_init: Not APQ8064 in I2S mode
  416. [ 2.268426] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  417. [ 2.269220] tabla codec probe...
  418. [ 2.335937] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  419. [ 2.336120] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  420. [ 2.336426] usb 1-1: Product: QHSUSB__BULK
  421. [ 2.336578] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  422. [ 2.386265] mmc0: new HS200 MMC card at address 0001
  423. [ 2.387669] mmcblk0: mmc0:0001 016G92 14.6 GiB
  424. [ 2.393468] Alternate GPT is invalid, using primary GPT.
  425. [ 2.393895] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  426. [ 2.396703] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  427. [ 2.397558] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  428. [ 2.398443] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  429. [ 2.399328] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  430. [ 2.400183] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  431. [ 2.401007] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  432. [ 2.401922] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  433. [ 2.402624] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  434. [ 2.403265] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  435. [ 2.404089] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  436. [ 2.404822] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  437. [ 2.405707] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  438. [ 2.406531] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  439. [ 2.407416] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  440. [ 2.408240] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  441. [ 2.409674] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  442. [ 2.414344] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  443. [ 2.415077] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  444. [ 2.415717] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  445. [ 2.416450] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  446. [ 2.417091] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  447. [ 2.417854] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  448. [ 2.418617] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  449. [ 2.419319] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  450. [ 2.419990] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  451. [ 2.420753] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  452. [ 2.421394] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  453. [ 2.422157] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  454. [ 2.422829] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  455. [ 2.423531] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  456. [ 2.424263] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  457. [ 2.425057] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  458. [ 2.425759] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  459. [ 2.426430] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  460. [ 2.427102] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  461. [ 2.427865] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  462. [ 2.428628] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  463. [ 2.431313] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  464. [ 2.431771] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  465. [ 2.436319] oprofile: using arm/armv7-krait
  466. [ 2.436624] u32 classifier
  467. [ 2.436716] Actions configured
  468. [ 2.436807] Netfilter messages via NETLINK v0.30.
  469. [ 2.437082] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  470. [ 2.437936] ctnetlink v0.93: registering with nfnetlink.
  471. [ 2.438180] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  472. [ 2.438333] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  473. [ 2.438760] xt_time: kernel timezone is -0000
  474. [ 2.439340] ip_tables: (C) 2000-2006 Netfilter Core Team
  475. [ 2.439859] arp_tables: (C) 2002 David S. Miller
  476. [ 2.440012] TCP: cubic registered
  477. [ 2.440134] Initializing XFRM netlink socket
  478. [ 2.440988] NET: Registered protocol family 10
  479. [ 2.444712] Mobile IPv6
  480. [ 2.444834] ip6_tables: (C) 2000-2006 Netfilter Core Team
  481. [ 2.445231] IPv6 over IPv4 tunneling driver
  482. [ 2.446055] NET: Registered protocol family 17
  483. [ 2.446268] NET: Registered protocol family 15
  484. [ 2.446635] Bluetooth: RFCOMM TTY layer initialized
  485. [ 2.446848] Bluetooth: RFCOMM socket layer initialized
  486. [ 2.447184] Bluetooth: RFCOMM ver 1.11
  487. [ 2.447367] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  488. [ 2.447672] Bluetooth: BNEP filters: protocol multicast
  489. [ 2.447855] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  490. [ 2.448496] L2TP core driver, V2.0
  491. [ 2.448710] PPPoL2TP kernel driver, V2.0
  492. [ 2.449534] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  493. [ 2.450083] Registering SWP/SWPB emulation handler
  494. [ 2.450267] clock_late_init: Removing enables held for handed-off clocks
  495. [ 2.455699] [MPDEC]: msm_mpdec_init init complete.
  496. [ 2.459179] MSM Watchdog Initialized
  497. [ 2.477796] registered taskstats version 1
  498. [ 2.479139] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-04-09 19:41:27 UTC (1460230887)
  499. [ 2.480085] read_ocv_trim: program rev reg is 0x53
  500. [ 2.480146] read_ocv_trim: trim reg is 0x43
  501. [ 2.480238] read_ocv_trim: trim delta is 6
  502. [ 2.480329] pm8921_is_usb_chg_plugged_in: called before init
  503. [ 2.500228] pm8921_is_usb_chg_plugged_in: called before init
  504. [ 2.501480] pm8921_is_usb_chg_plugged_in: called before init
  505. [ 2.501877] ocv_ir_compensation: comp ocv = 3794537, ocv = 3793815, ibatt_ua = 3300, rbatt_mohm = 219
  506. [ 2.502060] read_soc_params_raw: discard shutdown soc! cc_raw = 0xf4144010
  507. [ 2.502456] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  508. [ 2.502762] pm8921_is_batfet_closed: called before init
  509. [ 2.528551] pm8921_is_usb_chg_plugged_in: called before init
  510. [ 2.528673] adjust_soc: ibat_ua = 264900, vbat_uv = 4205596, soc = 80, batt_temp=277
  511. [ 2.531298] pm8921_get_batt_state: called before init
  512. [ 2.531603] pm8921_bms_probe: OK battery_capacity_at_boot=80 volt = 4216902 ocv = 3794802
  513. [ 2.533312] power_supply usb: driver failed to report `present' property: 4294967274
  514. [ 2.533587] power_supply usb: driver failed to report `present' property: 4294967274
  515. [ 2.534045] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  516. [ 2.534411] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  517. [ 2.535968] pm8921_get_batt_state: called before init
  518. [ 2.538531] pm8921_get_batt_state: called before init
  519. [ 2.548206] wlc: bq51051b_wlc_probe: probe
  520. [ 2.548664] wlc: bq51051b_wlc_hw_init: hw_init
  521. [ 2.549122] power_supply wireless: driver failed to report `present' property: 4294967274
  522. [ 2.549214] msm_otg msm_otg: USB in low power mode
  523. [ 2.549793] power_supply wireless: driver failed to report `present' property: 4294967274
  524. [ 2.550434] batt_temp_ctrl_init
  525. [ 2.550709] batt_temp_ctrl_probe
  526. [ 2.552266] android_vibrator: default amplitude 88
  527. [ 2.552693] android vibrator probed
  528. [ 2.553120] fsa8008 init
  529. [ 2.553670] fsa8008 probe
  530. [ 2.555012] input: hs_detect as /devices/virtual/input/input5
  531. [ 2.555531] ALSA device list:
  532. [ 2.555684] #0: apq8064-tabla-snd-card
  533. [ 2.557607] Freeing init memory: 1036K
  534. [ 2.759041] type=1403 audit(1460230887.770:2): policy loaded auid=4294967295 ses=4294967295
  535. [ 2.767037] type=1404 audit(1460230887.770:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  536. [ 3.011780] init: /init.rc: 61: invalid command 'load_system_props'
  537. [ 3.011933] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
  538. [ 3.012116] init: could not import file '/init.recovery.mako.rc' from '/init.rc'
  539. [ 3.015168] healthd: wakealarm_init: timerfd_create failed
  540. [ 3.528460] enable_store: android_usb: already disabled
  541. [ 3.529101] init: Unable to open persistent property directory /data/property errno: 2
  542. [ 3.529253] init: Unable to open persistent property directory /data/property errno: 2
  543. [ 3.532733] init: Warning! Service recovery needs a SELinux domain defined; please fix!
  544. [ 3.537097] adb_open
  545. [ 3.537280] mtp_bind_config
  546. [ 3.537524] adb_bind_config
  547. [ 3.547779] type=1400 audit(1460230888.550:4): avc: denied { write } for pid=156 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file
  548. [ 3.548054] type=1400 audit(1460230888.550:5): avc: denied { setenforce } for pid=156 comm="setenforce" scontext=u:r:recovery:s0 tcontext=u:object_r:kernel:s0 tclass=security
  549. [ 3.548176] type=1404 audit(1460230888.550:6): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
  550. [ 3.567984] recovery (151): undefined instruction: pc=b6c84788
  551. [ 3.568106] Code: 8000f3af 8000f3af f26001f0 e12fff1e (ec510f1e)
  552. [ 3.649015] mipi_dsi_controller_cfg: DSI status=8 failed
  553. [ 3.649504] mipi_dsi_panel_power: mipi lcd function started status = 1
  554. [ 3.649626] ext_dsv_load: Failed to create debugfs directory
  555. [ 3.653197] mipi_dsi_panel_power : reset start.
  556. [ 3.674164] mipi_lgit_lcd_on started
  557. [ 3.695833] mipi_lgit_lcd_on finished
  558. [ 3.718968] lm3530_backlight_off, on: 1
  559. [ 3.768991] mipi_lgit_lcd_off started
  560. [ 3.899008] mipi_lgit_lcd_off finished
  561. [ 3.899069] mipi_dsi_panel_power: mipi lcd function started status = 0
  562. [ 3.905569] lm3530_backlight_off, on: 0
  563. [ 3.906851] mipi_dsi_panel_power: mipi lcd function started status = 1
  564. [ 3.910972] mipi_dsi_panel_power : reset start.
  565. [ 3.932366] mipi_lgit_lcd_on started
  566. [ 3.989287] mipi_lgit_lcd_on finished
  567. [ 4.003815] lm3530_backlight_on, ++ lm3530_backlight_on
  568. [ 4.049717] type=1400 audit(1460230889.061:7): avc: denied { execmem } for pid=151 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process
  569. [ 4.049839] type=1400 audit(1460230889.061:8): avc: denied { execute } for pid=151 comm="recovery" path="/dev/ashmem" dev="tmpfs" ino=6874 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file
  570. [ 4.106027] type=1400 audit(1460230889.111:9): avc: denied { rename } for pid=151 comm="recovery" name="recovery.fstab" dev="rootfs" ino=4395 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  571. [ 4.139111] EXT4-fs (mmcblk0p23): 1 orphan inode deleted
  572. [ 4.139417] EXT4-fs (mmcblk0p23): recovery complete
  573. [ 4.146986] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
  574. [ 4.274835] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
  575. [ 4.433786] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
  576. [ 4.496963] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:
  577. [ 4.499557] type=1400 audit(1460230889.511:10): avc: denied { create } for pid=151 comm="recovery" name="fstab" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  578. [ 4.526201] EXT4-fs (mmcblk0p21): mounted filesystem without journal. Opts:
  579. [ 4.620601] SELinux: Context u:object_r:bootchart_data_file:s0 is not valid (left unmapped).
  580. [ 4.632290] SELinux: Context u:object_r:gatekeeper_data_file:s0 is not valid (left unmapped).
  581. [ 4.646757] SELinux: Context u:object_r:perfprofd_data_file:s0 is not valid (left unmapped).
  582. [ 4.647855] SELinux: Context u:object_r:vold_data_file:s0 is not valid (left unmapped).
  583. [ 5.576102] SELinux: Context u:object_r:heapdump_data_file:s0 is not valid (left unmapped).
  584. [ 6.506119] EXT4-fs (mmcblk0p21): mounted filesystem without journal. Opts:
  585. [ 7.283961] mtp_open
  586. [ 12.403082] audit_printk_skb: 30 callbacks suppressed
  587. [ 12.403113] type=1400 audit(1460230896.915:21): avc: denied { execute } for pid=180 comm="recovery" name="updater" dev="tmpfs" ino=7265 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
  588. [ 12.403235] type=1400 audit(1460230896.915:22): avc: denied { execute_no_trans } for pid=180 comm="recovery" path="/tmp/updater" dev="tmpfs" ino=7265 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
  589. [ 12.413032] EXT4-fs (mmcblk0p21): mounted filesystem without journal. Opts:
  590. [ 12.414893] type=1400 audit(1460230896.925:23): avc: denied { write } for pid=180 comm="updater" name="init.d" dev="mmcblk0p21" ino=401 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  591. [ 12.415107] type=1400 audit(1460230896.925:24): avc: denied { add_name } for pid=180 comm="updater" name="00confg" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  592. [ 12.415321] type=1400 audit(1460230896.925:25): avc: denied { create } for pid=180 comm="updater" name="00confg" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
  593. [ 12.416542] type=1400 audit(1460230896.925:26): avc: denied { write } for pid=180 comm="updater" name="00confg" dev="mmcblk0p21" ino=23133 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
  594. [ 12.416938] type=1400 audit(1460230896.925:27): avc: denied { setattr } for pid=180 comm="updater" name="00confg" dev="mmcblk0p21" ino=23133 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
  595. [ 12.417274] type=1400 audit(1460230896.925:28): avc: denied { setattr } for pid=180 comm="updater" name="init.d" dev="mmcblk0p21" ino=401 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  596. [ 12.536059] type=1400 audit(1460230897.045:29): avc: denied { remove_name } for pid=183 comm="busybox" name="mpdecision" dev="mmcblk0p21" ino=229 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  597. [ 12.536334] type=1400 audit(1460230897.045:30): avc: denied { rename } for pid=183 comm="busybox" name="mpdecision" dev="mmcblk0p21" ino=229 scontext=u:r:init:s0 tcontext=u:object_r:mpdecision_exec:s0 tclass=file
  598. [ 15.654417] EXT4-fs (mmcblk0p21): mounted filesystem without journal. Opts:
  599. [ 17.937341] EXT4-fs (mmcblk0p21): mounted filesystem without journal. Opts:
  600. [ 18.035983] EXT4-fs (mmcblk0p21): mounted filesystem without journal. Opts:
  601. [ 18.184312] SysRq : Emergency Remount R/O
  602. [ 18.213032] EXT4-fs (mmcblk0p23): re-mounted. Opts: (null)
  603. [ 18.236929] EXT4-fs (mmcblk0p22): re-mounted. Opts: (null)
  604. [ 18.237234] Emergency Remount complete
  605. [ 18.349793] msm_hsic_host msm_hsic_host: remove, state 1
  606. [ 18.349916] usb usb1: USB disconnect, device number 1
  607. [ 18.350068] usb 1-1: USB disconnect, device number 2
  608. [ 18.351869] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
  609. [ 18.519731] mipi_lgit_lcd_shutdown finished
  610. [ 18.519884] Restarting system with command ''.
  611. [ 18.519975] Going down for restart now
  612.  
  613. No errors detected
  614. Boot info:
  615. Last boot reason: reboot
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!