root@rpi-b:/home/freebsd # dmesg
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-ALPHA5 #0 r302164: Fri Jun 24 16:33:34 UTC 2016
    root@releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT: init without driver.
sema_sysinit
CPU: ARM1176JZ-S rev 7 (ARM11J core)
 Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
 WB enabled LABT branch prediction disabled
  16KB/32B 4-way instruction cache
  16KB/32B 4-way write-back-locking-C data cache
real memory  = 234876928 (223 MB)
avail memory = 219312128 (209 MB)
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff on simplebus0
Event timer "BCM2835-3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835-3" frequency 1000000 Hz quality 1000
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af on simplebus0
gpio0: read-only pins: 46-53.
gpio0: reserved pins: 48-53.
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin 16 on gpiobus0
gpioc0: <GPIO controller> on gpio0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f on simplebus0
spibus0: <OFW SPI bus> on spi0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff on simplebus0
uart0: console (115200,n,8,1)
vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f on simplebus0
vchiq: local ver 8 (min 3), remote ver 8.
pcm0: <VCHIQ audio> on vchiq0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x980000-0x99ffff on simplebus0
usbus0 on bcm283x_dwcotg0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 1440x900(1440x900@0,0) 24bpp
fb0: fbswap: 1, pitch 4320, base 0x0e5b6000, screen_size 3939840
cryptosoft0: <software crypto>
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
bcm2835_cpufreq0: ARM 700MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 2GB <SD SD02G 0.0 SN 577007BA MFG 08/2008 by 19 KG> at mmc0 41.6MHz/4bit/65535-block
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
warning: no time-of-day clock registered, system time will not be set accurately
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 3 ports with 2 removable, self powered
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:1e:2e:f2
ugen0.4: <Logitech> at usbus0
ugen0.5: <Dell> at usbus0
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 5> on usbus0
kbd1 at ukbd0
random: unblocking device.
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/11.00, addr 4> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
root@rpi-b:/home/freebsd #