Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ÿHELLO! BOOT0 is starting!
- boot0 version : 4.0.0
- rtc[1] value = 0x00010000
- rtc[2] value = 0x00020000
- rtc[3] value = 0x00030000
- DRAM DRIVE INFO: V1.0
- DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM normal_mode value: 00000001
- DRAM CLK =672 MHZ
- PMU: AXP81X
- ddr voltage = 1200 mv
- using ic A83T
- using axp AXP813
- DRAM zq value: 00003bfb
- dram size =2048
- card boot number = 0
- card no is 0
- sdcard 0 line count 0
- [mmc]: mmc driver ver 2014-8-11 15:06:39
- [mmc]: ***Try SD card 0***
- [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
- [mmc]: vendor: Man 00035344 Snr 408b2a18
- [mmc]: product: SE16G
- [mmc]: revision: 8.0
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- ERROR! NOT find the head of uboot.
- The size of uboot is 000d8000.
- sum=ce3ec68c
- src_sum=ce3ec68c
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- normal mode
- [ 0.301]
- U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
- [ 0.310]version: 2.1.0
- normal mode
- [ 0.390]pmbus: normal or secure os
- ready
- [ 0.394]PMU: AXP81X
- [ 0.396]PMU: AXP81X found
- bat_vol=180, ratio=100
- [ 0.402]PMU: dcdc2 900
- [ 0.404]PMU: pll1 1008 Mhz
- AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
- set power on vol to default
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 900, onoff=1
- dcdc3_vol = 900, onoff=1
- dcdc4_vol = 900, onoff=1
- dcdc6_vol = 900, onoff=1
- aldo1_vol = 1800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- eldo2_vol = 1800, onoff=0
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 3300, onoff=0
- dldo3_vol = 2500, onoff=1
- dldo4_vol = 2800, onoff=0
- fldo2_vol = 900, onoff=1
- gpio0_vol = 3300, onoff=1
- gpio1_vol = 3300, onoff=1
- find power_sply to end
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b04, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b08, value=0xd, pmu_vol=3300
- supply=dldo3
- axp=axp81x, supply=dldo3, vol=1800
- reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b10, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b14, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b18, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
- supply=aldo3
- axp=axp81x, supply=aldo3, vol=3000
- reg addr=0x1f02f00, value=0xa, pmu_vol=3000
- config gpio bias voltage finish
- vbus exist
- no battery, limit to dc
- ac100 reg 0x00 = 0x101
- ac100 reg 0xd0 = 0x0
- ac100 reg 0xd1 = 0x0
- __446__:(board.c:power_source_init)
- [AXP81X]:[00]=[35]
- [AXP81X]:[01]=[10]
- [AXP81X]:[02]=[02]
- [AXP81X]:[03]=[51]
- [AXP81X]:[04]=[00]
- [AXP81X]:[05]=[00]
- [AXP81X]:[06]=[00]
- [AXP81X]:[07]=[00]
- [AXP81X]:[08]=[00]
- [AXP81X]:[09]=[00]
- [AXP81X]:[0A]=[00]
- [AXP81X]:[0B]=[00]
- [AXP81X]:[0C]=[00]
- [AXP81X]:[0D]=[00]
- [AXP81X]:[0E]=[00]
- [AXP81X]:[0F]=[00]
- [AXP81X]:[10]=[3F]
- [AXP81X]:[11]=[00]
- [AXP81X]:[12]=[20]
- [AXP81X]:[13]=[C8]
- [AXP81X]:[14]=[08]
- [AXP81X]:[15]=[1A]
- [AXP81X]:[16]=[1A]
- [AXP81X]:[17]=[0B]
- [AXP81X]:[18]=[15]
- [AXP81X]:[19]=[00]
- [AXP81X]:[1A]=[16]
- [AXP81X]:[1B]=[00]
- [AXP81X]:[1C]=[0B]
- [AXP81X]:[1D]=[04]
- [AXP81X]:[1E]=[00]
- [AXP81X]:[1F]=[00]
- [AXP81X]:[20]=[11]
- [AXP81X]:[21]=[A8]
- [AXP81X]:[22]=[A8]
- [AXP81X]:[23]=[A8]
- [AXP81X]:[24]=[A4]
- [AXP81X]:[25]=[9E]
- [AXP81X]:[26]=[A8]
- [AXP81X]:[27]=[FC]
- [AXP81X]:[28]=[0B]
- [AXP81X]:[29]=[0B]
- [AXP81X]:[2A]=[17]
- [AXP81X]:[2B]=[00]
- [AXP81X]:[2C]=[00]
- [AXP81X]:[2D]=[B0]
- [AXP81X]:[2E]=[40]
- [AXP81X]:[2F]=[00]
- [AXP81X]:[30]=[03]
- [AXP81X]:[31]=[03]
- [AXP81X]:[32]=[43]
- [AXP81X]:[33]=[C8]
- [AXP81X]:[34]=[45]
- [AXP81X]:[35]=[68]
- [AXP81X]:[36]=[59]
- [AXP81X]:[37]=[00]
- [AXP81X]:[38]=[A5]
- [AXP81X]:[39]=[1F]
- [AXP81X]:[3A]=[80]
- [AXP81X]:[3B]=[08]
- [AXP81X]:[3C]=[FC]
- [AXP81X]:[3D]=[16]
- [AXP81X]:[3E]=[7C]
- BPI-M3:[AXP81X]:[3A]=[80]
- BPI-M3: [AXP81X]: set [3A]=[85]
- BPI-M3:[AXP81X]: read [3A]=[85]
- BPI-M3: [AXP81X]: set [35]=[83]
- BPI-M3:[AXP81X]: read [35]=[83]
- BPI-M3:[AXP81X]: do_reset
- resetting ...
- set next mode 14
- drv_disp_exit
- [ 1.799][mmc]: MMC Device 2 not found
- [ 1.803][mmc]: mmc not find,so not exit
- HELLO! BOOT0 is starting!
- boot0 version : 4.0.0
- rtc[1] value = 0x00010000
- rtc[2] value = 0x00020000
- rtc[3] value = 0x00030000
- DRAM DRIVE INFO: V1.0
- DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM normal_mode value: 00000001
- DRAM CLK =672 MHZ
- PMU: AXP81X
- ddr voltage = 1200 mv
- using ic A83T
- using axp AXP813
- DRAM zq value: 00003bfb
- dram size =2048
- card boot number = 0
- card no is 0
- sdcard 0 line count 0
- [mmc]: mmc driver ver 2014-8-11 15:06:39
- [mmc]: ***Try SD card 0***
- [mmc]: SD/MMC Card: 4bit, capacity: 15193MB
- [mmc]: vendor: Man 00035344 Snr 408b2a18
- [mmc]: product: SE16G
- [mmc]: revision: 8.0
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- ERROR! NOT find the head of uboot.
- The size of uboot is 000d8000.
- sum=ce3ec68c
- src_sum=ce3ec68c
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- normal mode
- [ 0.300]
- U-Boot 2011.09-rc1-00000-gfe0f876 (May 03 2016 - 13:13:31) Allwinner Technology
- [ 0.309]version: 2.1.0
- normal mode
- [ 0.389]pmbus: normal or secure os
- ready
- [ 0.393]PMU: AXP81X
- [ 0.395]PMU: AXP81X found
- bat_vol=0, ratio=100
- [ 0.400]PMU: dcdc2 900
- [ 0.403]PMU: pll1 1008 Mhz
- AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
- set power on vol to default
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 900, onoff=1
- dcdc3_vol = 900, onoff=1
- dcdc4_vol = 900, onoff=1
- dcdc6_vol = 900, onoff=1
- aldo1_vol = 1800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- eldo2_vol = 1800, onoff=0
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 3300, onoff=0
- dldo3_vol = 2500, onoff=1
- dldo4_vol = 2800, onoff=0
- fldo2_vol = 900, onoff=1
- gpio0_vol = 3300, onoff=1
- gpio1_vol = 3300, onoff=1
- find power_sply to end
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b04, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b08, value=0xd, pmu_vol=3300
- supply=dldo3
- axp=axp81x, supply=dldo3, vol=1800
- reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b10, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b14, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b18, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
- supply=aldo3
- axp=axp81x, supply=aldo3, vol=3000
- reg addr=0x1f02f00, value=0xa, pmu_vol=3000
- config gpio bias voltage finish
- vbus exist
- no battery, limit to dc
- ac100 reg 0x00 = 0x101
- ac100 reg 0xd0 = 0x0
- ac100 reg 0xd1 = 0x0
- __446__:(board.c:power_source_init)
- [AXP81X]:[00]=[35]
- [AXP81X]:[01]=[10]
- [AXP81X]:[02]=[02]
- [AXP81X]:[03]=[51]
- [AXP81X]:[04]=[00]
- [AXP81X]:[05]=[00]
- [AXP81X]:[06]=[00]
- [AXP81X]:[07]=[00]
- [AXP81X]:[08]=[00]
- [AXP81X]:[09]=[00]
- [AXP81X]:[0A]=[00]
- [AXP81X]:[0B]=[00]
- [AXP81X]:[0C]=[00]
- [AXP81X]:[0D]=[00]
- [AXP81X]:[0E]=[00]
- [AXP81X]:[0F]=[0E]
- [AXP81X]:[10]=[3F]
- [AXP81X]:[11]=[00]
- [AXP81X]:[12]=[20]
- [AXP81X]:[13]=[C8]
- [AXP81X]:[14]=[08]
- [AXP81X]:[15]=[1A]
- [AXP81X]:[16]=[1A]
- [AXP81X]:[17]=[0B]
- [AXP81X]:[18]=[15]
- [AXP81X]:[19]=[00]
- [AXP81X]:[1A]=[16]
- [AXP81X]:[1B]=[00]
- [AXP81X]:[1C]=[0B]
- [AXP81X]:[1D]=[04]
- [AXP81X]:[1E]=[00]
- [AXP81X]:[1F]=[00]
- [AXP81X]:[20]=[11]
- [AXP81X]:[21]=[A8]
- [AXP81X]:[22]=[A8]
- [AXP81X]:[23]=[A8]
- [AXP81X]:[24]=[A4]
- [AXP81X]:[25]=[9E]
- [AXP81X]:[26]=[A8]
- [AXP81X]:[27]=[FC]
- [AXP81X]:[28]=[0B]
- [AXP81X]:[29]=[0B]
- [AXP81X]:[2A]=[17]
- [AXP81X]:[2B]=[00]
- [AXP81X]:[2C]=[00]
- [AXP81X]:[2D]=[B0]
- [AXP81X]:[2E]=[40]
- [AXP81X]:[2F]=[00]
- [AXP81X]:[30]=[03]
- [AXP81X]:[31]=[03]
- [AXP81X]:[32]=[43]
- [AXP81X]:[33]=[C8]
- [AXP81X]:[34]=[45]
- [AXP81X]:[35]=[83]
- [AXP81X]:[36]=[59]
- [AXP81X]:[37]=[00]
- [AXP81X]:[38]=[A5]
- [AXP81X]:[39]=[1F]
- [AXP81X]:[3A]=[85]
- [AXP81X]:[3B]=[08]
- [AXP81X]:[3C]=[FC]
- [AXP81X]:[3D]=[16]
- [AXP81X]:[3E]=[7C]
- BPI-M3:[AXP81X]:[3A]=[85]
- limit to 2500mA
- fel key old mode
- run key detect
- no key found
- no key input
- dram_para_set start
- dram_para_set end
- [ 0.746]DRAM: 2 GiB
- relocation Offset is: 75af7000
- user_gpio config
- user_gpio ok
- gic: normal or no secure os mode
- script config pll_de to 504 Mhz
- script config pll_video1 to 297 Mhz
- Not Found clk pll_video in script
- enable power vcc-hdmi-18, ret=0
- DRV_DISP_Init end
- [ 0.984]boot_disp.output_disp=1
- [ 0.988]boot_disp.output_type=3
- [ 0.991]boot_disp.output_mode=5
- [ 0.994]fetch script data boot_disp.auto_hpd fail
- disp1 device type(4) enable
- attched ok, mgr1<-->device1, type=4, mode=5----
- ready to set mode
- workmode = 0
- MMC: 0
- [ 1.029][mmc]: mmc driver ver 2015-04-13 14:50:00
- [ 1.034][mmc]: get sdc_phy_wipe fail.
- [ 1.038][mmc]: get sdc0 sdc_erase fail.
- [ 1.042][mmc]: get sdc_f_max fail,use default 50000000Hz
- [ 1.047][mmc]: get sdc_ex_dly_used fail,use default dly
- [ 1.053][mmc]: SUNXI SD/MMC: 0
- [ 1.066][mmc]: *Try SD card 0*
- [ 1.101][mmc]: CID 0x3534453 0x45313647 0x80408b2a 0x18010893
- [ 1.106][mmc]: mmc clk 50000000
- [ 1.110][mmc]: SD/MMC Card: 4bit, capacity: 15193MB
- [ 1.115][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
- [ 1.120][mmc]: ***SD/MMC 0 init OK!!!***
- [ 1.124][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
- [ 1.130][mmc]: secure_feature 0x0
- [ 1.133][mmc]: secure_removal_type 0x0
- [ 1.137]sunxi flash init ok
- [ 1.141][mmc]: MMC Device 2 not found
- [ 1.145][mmc]: Can not find mmc dev
- [ 1.149][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
- sunxi_secstorage_read fail
- get secure storage map err
- sunxi secure storage is not supported
- private partition is not exist
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:6-
- -name- -start- -size-
- boot-res : 1000000 2000000
- env : 3000000 1000000
- boot : 4000000 1000000
- rootfs : 5000000 20000000
- klog : 25000000 1000000
- UDISK : 26000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- key 0
- recovery key high 10, low 8
- cant find fstbt value
- no misc partition is found
- to be run cmd=run setargs_mmc boot_normal
- serial is: 00000000000000000000
- mount part name boot-res
- cant open script.bin, maybe it is not exist
- WORK_MODE_BOOT
- board_status_probe
- [ 1.247]pre sys mode
- sunxi_bmp_logo_display
- [ 1.369][mmc]: blkcnt should not be 0
- [ 1.387]fetch script data boot_disp.output_disp fail
- [ 1.392]screen_id =1, screen_width =1280, screen_height =720
- [ 1.398]frame buffer address 46400000
- [ 1.402]Hit any key to stop autoboot: 3 2 1 0
- [ 4.657][mmc]: MMC Device 2 not found
- ** Invalid boot device **
- [ 4.667][mmc]: blkcnt should not be 0
- Loaded environment from uEnv.txt
- Running uenvcmd ...
- Banaan Pi bpi-m3 chip: a83t Service: linux
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: Linux-3.4.39-BPI-M3-Kernel
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 5717288 Bytes = 5.5 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 43100000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 2449284 Bytes = 2.3 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- [ 5.188][mmc]: MMC Device 2 not found
- [ 5.192][mmc]: mmc not find,so not exit
- [ 5.196]
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 2048MB
- ion_carveout reserve: 96m 128m
- ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
- ion_cma reserve: 120m 176m 512m
- ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
- ------sun8i_smp_init_ops----37-----
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 524288
- [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
- [ 0.000000] Normal zone: 1404 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3204 pages used for memmap
- [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] [mcpm_smp_init_cpus] ncores=8
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
- [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
- [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 2048MB = 2048MB total
- [ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
- [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
- [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
- [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001418] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.001492] pid_max: default: 32768 minimum: 301
- [ 0.001828] Mount-cache hash table entries: 512
- [ 0.003174] Initializing cgroup subsys cpuacct
- [ 0.003218] Initializing cgroup subsys memory
- [ 0.003290] Initializing cgroup subsys devices
- [ 0.003324] Initializing cgroup subsys freezer
- [ 0.003356] Initializing cgroup subsys blkio
- [ 0.003409] Initializing cgroup subsys perf_event
- [ 0.003506] CPU: Testing write buffer coherency: ok
- [ 0.003596] ftrace: allocating 27619 entries in 81 pages
- [ 0.040299] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.040383] Setting up static identity map for 0x4076b5a8 - 0x4076b600
- [ 0.010000] CPU1: Booted secondary processor
- [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.010000] CPU2: Booted secondary processor
- [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.010000] CPU3: Booted secondary processor
- [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.260089] CPU4: failed to boot: -22
- [ 0.300068] CPU5: failed to boot: -22
- [ 0.340069] CPU6: failed to boot: -22
- [ 0.380092] CPU7: failed to boot: -22
- [ 0.380308] Brought up 4 CPUs
- [ 0.380333] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.380909] devtmpfs: initialized
- [ 0.387450] pinctrl core: initialized pinctrl subsystem
- [ 0.411039] NET: Registered protocol family 16
- [ 0.434042] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.434156] script_sysfs_init success
- [ 0.434207] sunxi_dump_init success
- [ 0.435344] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.437160] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.437620] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
- [ 0.438833] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.438879] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.439735] [sunxi-module]: [sunxi-module.0] probe success
- [ 0.440430] script config pll_video1 to 297 Mhz
- [ 0.440466] script config pll_ve to 432 Mhz
- [ 0.440490] Not Found clk pll_periph in script
- [ 0.440519] script config pll_gpu to 432 Mhz
- [ 0.440547] script config pll_hsic to 480 Mhz
- [ 0.440575] script config pll_de to 504 Mhz
- [ 0.440597] sunxi_default_clk_init
- [ 0.440617] try to set pll6ahb1 to 200000000
- [ 0.440679] try to set ahb clk source to pll6ahb1
- [ 0.440704] set ahb clk source to pll6ahb1
- [ 0.440728] try to set ahb1 to 200000000
- [ 0.440754] try to set apb1 to 100000000
- [ 0.441667] ===fe3o4==== sunxi_root_procfs_attach ret:0
- [ 0.451278] bio: create slab <bio-0> at 0
- [ 0.451278] [ARISC] :sunxi-arisc driver v1.70
- [ 0.463388] [ARISC] :arisc version: [v0.1.25.3]
- [ 0.463445] [sunxi-module]: arisc register success
- [ 0.463877] sunxi_get_soc_bin: slow chip
- [ 0.464325] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
- [ 0.010000] CPU4: Booted secondary processor
- [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
- [ 0.010000] CPU5: Booted secondary processor
- [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
- [ 0.010000] CPU6: Booted secondary processor
- [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
- [ 0.010000] CPU7: Booted secondary processor
- [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
- [ 0.491431] SCSI subsystem initialized
- [ 0.491431] libata version 3.00 loaded.
- [ 0.491431] usbcore: registered new interface driver usbfs
- [ 0.491431] usbcore: registered new interface driver hub
- [ 0.491431] usbcore: registered new device driver usb
- [ 0.491431] twi_chan_cfg()335 - [twi0] has no twi_regulator.
- [ 0.491431] twi_chan_cfg()335 - [twi1] has no twi_regulator.
- [ 0.491431] twi_chan_cfg()335 - [twi2] has no twi_regulator.
- [ 0.491688] Linux video capture interface: v2.00
- [ 0.500604] BPI-M3: tmp [00]
- [ 0.500604] BPI-M3: set PMIC AC 4000mA
- [ 0.500604] BPI-M3: set PMIC AC 4000mA
- [ 0.510407] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.511067] Bluetooth: Core ver 2.16
- [ 0.511135] NET: Registered protocol family 31
- [ 0.511160] Bluetooth: HCI device and connection manager initialized
- [ 0.511193] Bluetooth: HCI socket layer initialized
- [ 0.511219] Bluetooth: L2CAP socket layer initialized
- [ 0.511265] Bluetooth: SCO socket layer initialized
- [ 0.511554] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.511645] Switching to clocksource arch_sys_counter
- [ 0.537857] FS-Cache: Loaded
- [ 0.538205] CacheFiles: Loaded
- [ 0.549904] axp81x_dcdc1: Failed to create debugfs directory
- [ 0.551158] NET: Registered protocol family 2
- [ 0.551553] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.552334] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.554830] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.556411] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.556443] TCP: reno registered
- [ 0.556470] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.556536] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.556984] NET: Registered protocol family 1
- [ 0.557439] RPC: Registered named UNIX socket transport module.
- [ 0.557474] RPC: Registered udp transport module.
- [ 0.557498] RPC: Registered tcp transport module.
- [ 0.557521] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.558232] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 0.558426] [pm]aw_pm_init!
- [ 0.558452] standby_mode = 1.
- [ 0.558472] wakeup src cnt is : 2.
- [ 0.558499] pmu name: pmu1_para .
- [ 0.558525] pmu1_enable = 0x1.
- [ 0.558546] pmux_id = 0x7.
- [ 0.558568] pmu name: pmu2_para .
- [ 0.558590] config_pmux_para: script_parser_fetch err.
- [ 0.558615] pmu2_enable = 0x0.
- [ 0.559035] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.559220] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.559260] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.559352] after inited: sys_mask config = 0xebd5.
- [ 0.559380] dynamic_standby enalbe = 0x0.
- [ 0.559435] sunxi_reg_init enter
- [ 0.559765] lock super standby for a83!
- [ 0.559799] lookup_scene_lock_name: new scene lock super_standby
- [ 0.559827] scene_lock_init name=super_standby
- [ 0.559853] scene_lock: super_standby, type 5, count 1
- [ 0.561861] highmem bounce pool size: 64 pages
- [ 0.569795] VFS: Disk quotas dquot_6.5.2
- [ 0.570234] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.572406] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.572975] NFS: Registering the id_resolver key type
- [ 0.573764] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.575044] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.575487] fuse init (API version 7.18)
- [ 0.576631] ceph: loaded (mds proto 32)
- [ 0.576677] msgmni has been set to 1175
- [ 0.584785] alg: No test for stdrng (krng)
- [ 0.668240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.668298] io scheduler noop registered
- [ 0.668321] io scheduler deadline registered
- [ 0.668526] io scheduler cfq registered (default)
- [ 0.669049] pwm module init!
- [ 0.669660] [DISP]disp_module_init
- [ 0.703916] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
- [ 0.719183] Console: switching to colour frame buffer device 160x45
- [ 0.735321] [DISP]disp_module_init finish
- [ 0.810774] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.810985] sw_uart_pm()890 - uart0 clk is already enable
- [ 0.811152] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 1.003459] console [ttyS0] enabled
- [ 1.145537] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.309629] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 1.470340] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.789099] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
- [ 1.945126] [drm] Initialized drm 1.1.0 20060810
- [ 2.104884] brd: module loaded
- [ 2.109133] loop: module loaded
- [ 2.109365] [rf_pm]: select module num is 10
- [ 2.109375] [rf_pm]: module power1 name vcc-wifi-io
- [ 2.109384] [rf_pm]: failed to fetch module_power1_vol
- [ 2.109394] [rf_pm]: module power2 name
- [ 2.109402] [rf_pm]: failed to fetch module_power2_vol
- [ 2.109411] [rf_pm]: module power3 name
- [ 2.109420] [rf_pm]: failed to fetch module_power3_vol
- [ 2.109428] [rf_pm]: mod has no power_switch gpio
- [ 2.109437] [rf_pm]: mod has no chip_en gpio
- [ 2.109445] [rf_pm]: lpo_use_apclk: ac10032k2
- [ 2.109568] [rf_pm]: get power regulator failed.
- [ 2.109577] [rf_pm]: enable vcc-wifi-io.
- [ 2.110199] [rf_pm]: mod info power switch -1
- [ 2.110306] [rf_pm]: set ac10032k2 32k out
- [ 2.110432] scene_lock_init name=rf_pm
- [ 2.110768] [wifi_pm]: wifi gpio init is OK !!
- [ 2.110846] [rfkill]: mod has no ls_int gpio
- [ 2.110854] [rfkill]: mod has no pcm_ch gpio
- [ 2.111170] [rfkill]: rfkill set power 0
- [ 2.130101] Loading iSCSI transport class v2.0-870.
- [ 2.130590] iscsi: registered transport (tcp)
- [ 2.131095] [spi]: Found 1 spi devices in config files
- [ 2.131108] boards_num modalias max_spd_hz bus_num cs mode
- [ 2.131128] 0 spidev 33000000 0 0 3
- [ 2.131582] axp81x_dcdc1: Failed to create debugfs directory
- [ 2.131869] spi spi0: master is unqueued, this is deprecated
- [ 2.132208] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
- [ 2.132223] [spi-0]: driver probe succeed, base f1c68000, irq 97!
- [ 2.133778] usbcore: registered new interface driver qf9700
- [ 2.133846] usbcore: registered new interface driver smsc95xx
- [ 2.133910] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.154069] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.154105] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 2.265894] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 2.600058] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 2.773641] ehci_irq: highspeed device connect
- [ 2.921295] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.967948] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.979614] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.991654] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
- [ 3.002764] usb usb1: SerialNumber: sunxi-ehci
- [ 3.012115] hub 1-0:1.0: USB hub found
- [ 3.020057] hub 1-0:1.0: 1 port detected
- [ 3.028562] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.059367] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.071837] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
- [ 3.084245] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 3.154130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.165744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.177881] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.189986] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
- [ 3.201556] usb usb2: SerialNumber: sunxi-ohci
- [ 3.211260] hub 2-0:1.0: USB hub found
- [ 3.219637] hub 2-0:1.0: 1 port detected
- [ 3.228666] Initializing USB Mass Storage driver...
- [ 3.238456] usbcore: registered new interface driver usb-storage
- [ 3.249433] USB Mass Storage support registered.
- [ 3.259020] usbcore: registered new interface driver ums-alauda
- [ 3.270100] usbcore: registered new interface driver ums-cypress
- [ 3.281203] usbcore: registered new interface driver ums-datafab
- [ 3.292250] usbcore: registered new interface driver ums_eneub6250
- [ 3.303477] usbcore: registered new interface driver ums-freecom
- [ 3.314382] usbcore: registered new interface driver ums-isd200
- [ 3.325115] usbcore: registered new interface driver ums-jumpshot
- [ 3.335966] usbcore: registered new interface driver ums-karma
- [ 3.340167] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
- [ 3.357817] usbcore: registered new interface driver ums-onetouch
- [ 3.368580] usbcore: registered new interface driver ums-realtek
- [ 3.379145] usbcore: registered new interface driver ums-sddr09
- [ 3.389607] usbcore: registered new interface driver ums-sddr55
- [ 3.399963] usbcore: registered new interface driver ums-usbat
- [ 3.410179] usbcore: registered new interface driver usbserial
- [ 3.420239] usbcore: registered new interface driver usbserial_generic
- [ 3.431009] USB Serial support registered for generic
- [ 3.490687] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
- [ 3.501691] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.513306] usb 1-1: Product: USB 2.0 Hub
- [ 3.521845] hub 1-1:1.0: USB hub found
- [ 3.529563] hub 1-1:1.0: 4 ports detected
- [ 3.538497] usbserial: USB Serial Driver core
- [ 3.546976] file system registered
- [ 3.556005] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 3.567116] android_usb gadget: Number of LUNs=3
- [ 3.575624] lun0: LUN: removable file: (no medium)
- [ 3.584362] lun1: LUN: removable file: (no medium)
- [ 3.593018] lun2: LUN: removable file: (no medium)
- [ 3.601988] android_usb gadget: android_usb ready
- [ 3.610858] axp81x_dcdc1: Failed to create debugfs directory
- [ 3.620426] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
- [ 3.630505] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
- [ 3.643080] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.653914] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.667573] usb usb3: Product: sunxi_hcd host driver
- [ 3.678613] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
- [ 3.692124] usb usb3: SerialNumber: sunxi_hcd_host0
- [ 3.704139] hub 3-0:1.0: USB hub found
- [ 3.713813] hub 3-0:1.0: 1 port detected
- [ 3.724932] mousedev: PS/2 mouse device common for all mice
- [ 3.734866] sunxikbd_script_init: key para not found, used default para.
- [ 3.746696] sunxi_rtc_init(796): sunxi rtc device register!
- [ 3.746807] keyname:ctp_para subname:ctp_power_io ,get error!
- [ 3.767022] get sysconfig para erro!
- [ 3.767297] rtc_gettime(333): read time 1970-1-1 1:0:12
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement