API tools faq
paste
Guest User

Untitled

a guest
Mar 18th, 2017
347
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 24.95 KB | None | 0 0
raw download clone embed print report
  1. [    0.000000] Booting Linux on physical CPU 0x0
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Initializing cgroup subsys cpuacct
  5. [    0.000000] Linux version 4.4.27-v7+ (root@vagrant-ubuntu-trusty-32) (gcc version 4.8.3 20140106 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.01 - Linaro GCC 2013.11) ) #2 SMP Wed Oct 26 19:09:12 UTC 2016
  6. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  7. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
  9. [    0.000000] cma: Reserved 8 MiB at 0x3a800000
  10. [    0.000000] Memory policy: Data cache writealloc
  11. [    0.000000] On node 0 totalpages: 241664
  12. [    0.000000] free_area_init_node: node 0, pgdat 808aef80, node_mem_map b9fa6000
  13. [    0.000000]   Normal zone: 2124 pages used for memmap
  14. [    0.000000]   Normal zone: 0 pages reserved
  15. [    0.000000]   Normal zone: 241664 pages, LIFO batch:31
  16. [    0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
  17. [    0.000000] [bcm2709_smp_init_cpus] ncores=4
  18. [    0.000000] PERCPU: Embedded 13 pages/cpu @b9f61000 s22592 r8192 d22464 u53248
  19. [    0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
  20. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
  22. [    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa22082 bcm2709.serial=0x69d0bbab smsc95xx.macaddr=B8:27:EB:D0:BB:AB bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait fbcon=map:10 fbcon=font:VGA8x8 quiet splash plymouth.ignore-serial-consoles
  23. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  25. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  26. [    0.000000] Memory: 939148K/966656K available (6268K kernel code, 432K rwdata, 1716K rodata, 476K init, 764K bss, 19316K reserved, 8192K cma-reserved)
  27. [    0.000000] Virtual kernel memory layout:
  28.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  29.     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  30.     vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
  31.     lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
  32.     modules : 0x7f000000 - 0x80000000   (  16 MB)
  33.       .text : 0x80008000 - 0x807d4484   (7986 kB)
  34.       .init : 0x807d5000 - 0x8084c000   ( 476 kB)
  35.       .data : 0x8084c000 - 0x808b82c0   ( 433 kB)
  36.        .bss : 0x808bb000 - 0x8097a1ec   ( 765 kB)
  37. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [    0.000000] Hierarchical RCU implementation.
  39. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  40. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  41. [    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  42. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  43. [    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  44. [    0.000025] Switching to timer-based delay loop, resolution 52ns
  45. [    0.000276] Console: colour dummy device 80x30
  46. [    0.000475] console [tty1] enabled
  47. [    0.000501] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  48. [    0.000521] pid_max: default: 32768 minimum: 301
  49. [    0.000825] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  50. [    0.000841] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  51. [    0.001769] Disabling cpuset control group subsystem
  52. [    0.001802] Initializing cgroup subsys io
  53. [    0.001831] Initializing cgroup subsys memory
  54. [    0.001874] Initializing cgroup subsys devices
  55. [    0.001895] Initializing cgroup subsys freezer
  56. [    0.001915] Initializing cgroup subsys net_cls
  57. [    0.001962] CPU: Testing write buffer coherency: ok
  58. [    0.002024] ftrace: allocating 21216 entries in 63 pages
  59. [    0.050869] CPU0: update cpu_capacity 1024
  60. [    0.050901] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  61. [    0.050914] [bcm2709_smp_prepare_cpus] enter
  62. [    0.051052] Setting up static identity map for 0x8240 - 0x8274
  63. [    0.052760] [bcm2709_boot_secondary] cpu:1 started (0) 17
  64. [    0.052936] [bcm2709_secondary_init] enter cpu:1
  65. [    0.052977] CPU1: update cpu_capacity 1024
  66. [    0.052984] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  67. [    0.053364] [bcm2709_boot_secondary] cpu:2 started (0) 18
  68. [    0.053505] [bcm2709_secondary_init] enter cpu:2
  69. [    0.053526] CPU2: update cpu_capacity 1024
  70. [    0.053533] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  71. [    0.053898] [bcm2709_boot_secondary] cpu:3 started (0) 17
  72. [    0.054027] [bcm2709_secondary_init] enter cpu:3
  73. [    0.054048] CPU3: update cpu_capacity 1024
  74. [    0.054054] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  75. [    0.054115] Brought up 4 CPUs
  76. [    0.054138] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  77. [    0.054146] CPU: All CPU(s) started in HYP mode.
  78. [    0.054154] CPU: Virtualization extensions available.
  79. [    0.054782] devtmpfs: initialized
  80. [    0.066472] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  81. [    0.066800] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  82. [    0.067530] pinctrl core: initialized pinctrl subsystem
  83. [    0.068079] NET: Registered protocol family 16
  84. [    0.073330] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  85. [    0.081053] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  86. [    0.081065] hw-breakpoint: maximum watchpoint size is 8 bytes.
  87. [    0.081227] Serial: AMBA PL011 UART driver
  88. [    0.081368] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  89. [    0.081533] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  90. [    0.153029] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
  91. [    0.153577] SCSI subsystem initialized
  92. [    0.153747] usbcore: registered new interface driver usbfs
  93. [    0.153826] usbcore: registered new interface driver hub
  94. [    0.153918] usbcore: registered new device driver usb
  95. [    0.160438] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-10-20 14:57
  96. [    0.187659] clocksource: Switched to clocksource arch_sys_counter
  97. [    0.230870] FS-Cache: Loaded
  98. [    0.231148] CacheFiles: Loaded
  99. [    0.243458] NET: Registered protocol family 2
  100. [    0.244335] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  101. [    0.244449] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  102. [    0.244638] TCP: Hash tables configured (established 8192 bind 8192)
  103. [    0.244732] UDP hash table entries: 512 (order: 2, 16384 bytes)
  104. [    0.244779] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  105. [    0.245009] NET: Registered protocol family 1
  106. [    0.245335] RPC: Registered named UNIX socket transport module.
  107. [    0.245345] RPC: Registered udp transport module.
  108. [    0.245353] RPC: Registered tcp transport module.
  109. [    0.245362] RPC: Registered tcp NFSv4.1 backchannel transport module.
  110. [    0.246498] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  111. [    0.247919] futex hash table entries: 1024 (order: 4, 65536 bytes)
  112. [    0.261227] VFS: Disk quotas dquot_6.6.0
  113. [    0.261498] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  114. [    0.263664] FS-Cache: Netfs 'nfs' registered for caching
  115. [    0.264574] NFS: Registering the id_resolver key type
  116. [    0.264635] Key type id_resolver registered
  117. [    0.264645] Key type id_legacy registered
  118. [    0.266943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  119. [    0.267073] io scheduler noop registered
  120. [    0.267094] io scheduler deadline registered (default)
  121. [    0.267150] io scheduler cfq registered
  122. [    0.269793] BCM2708FB: allocated DMA memory fac00000
  123. [    0.269819] BCM2708FB: allocated DMA channel 0 @ f3007000
  124. [    0.278618] Console: switching to colour frame buffer device 82x52
  125. [    1.040412] bcm2835-rng 3f104000.rng: hwrng registered
  126. [    1.040571] vc-cma: Videocore CMA driver
  127. [    1.040581] vc-cma: vc_cma_base      = 0x00000000
  128. [    1.040591] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
  129. [    1.040600] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
  130. [    1.040826] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  131. [    1.055639] brd: module loaded
  132. [    1.064306] loop: module loaded
  133. [    1.065255] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
  134. [    1.066696] Loading iSCSI transport class v2.0-870.
  135. [    1.067352] usbcore: registered new interface driver smsc95xx
  136. [    1.067405] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  137. [    1.267724] Core Release: 2.80a
  138. [    1.267737] Setting default values for core params
  139. [    1.267773] Finished setting default values for core params
  140. [    1.468147] Using Buffer DMA mode
  141. [    1.468158] Periodic Transfer Interrupt Enhancement - disabled
  142. [    1.468166] Multiprocessor Interrupt Enhancement - disabled
  143. [    1.468175] OTG VER PARAM: 0, OTG VER FLAG: 0
  144. [    1.468189] Dedicated Tx FIFOs mode
  145. [    1.468500] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
  146. [    1.468529] FIQ FSM acceleration enabled for :
  147. Non-periodic Split Transactions
  148. Periodic Split Transactions
  149. High-Speed Isochronous Endpoints
  150. Interrupt/Control Split Transaction hack enabled
  151. [    1.468552] dwc_otg: Microframe scheduler enabled
  152. [    1.468596] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80437adc
  153. [    1.468609] WARN::hcd_init_fiq:414: FIQ ASM at 0x80437e38 length 36
  154. [    1.468624] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb9a8000
  155. [    1.468685] dwc_otg 3f980000.usb: DWC OTG Controller
  156. [    1.468720] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  157. [    1.468756] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  158. [    1.468803] Init: Port Power? op_state=1
  159. [    1.468811] Init: Power Port (0)
  160. [    1.469004] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  161. [    1.469019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  162. [    1.469032] usb usb1: Product: DWC OTG Controller
  163. [    1.469044] usb usb1: Manufacturer: Linux 4.4.27-v7+ dwc_otg_hcd
  164. [    1.469056] usb usb1: SerialNumber: 3f980000.usb
  165. [    1.469850] hub 1-0:1.0: USB hub found
  166. [    1.469895] hub 1-0:1.0: 1 port detected
  167. [    1.470501] dwc_otg: FIQ enabled
  168. [    1.470510] dwc_otg: NAK holdoff enabled
  169. [    1.470519] dwc_otg: FIQ split-transaction FSM enabled
  170. [    1.470550] Module dwc_common_port init
  171. [    1.470801] usbcore: registered new interface driver usb-storage
  172. [    1.471062] mousedev: PS/2 mouse device common for all mice
  173. [    1.471755] bcm2835-cpufreq: min=600000 max=1200000
  174. [    1.472016] sdhci: Secure Digital Host Controller Interface driver
  175. [    1.472025] sdhci: Copyright(c) Pierre Ossman
  176. [    1.472326] sdhost: log_buf @ bac13000 (fac13000)
  177. [    1.527692] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  178. [    1.529955] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  179. [    1.529969] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  180. [    1.567858] sdhci-pltfm: SDHCI platform and OF driver helper
  181. [    1.568259] ledtrig-cpu: registered to indicate activity on CPUs
  182. [    1.568380] hidraw: raw HID events driver (C) Jiri Kosina
  183. [    1.568565] usbcore: registered new interface driver usbhid
  184. [    1.568574] usbhid: USB HID core driver
  185. [    1.569130] Initializing XFRM netlink socket
  186. [    1.569164] NET: Registered protocol family 17
  187. [    1.569300] Key type dns_resolver registered
  188. [    1.569912] Registering SWP/SWPB emulation handler
  189. [    1.570655] registered taskstats version 1
  190. [    1.570847] vc-sm: Videocore shared memory driver
  191. [    1.570862] [vc_sm_connected_init]: start
  192. [    1.571341] [vc_sm_connected_init]: end - returning 0
  193. [    1.572698] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  194. [    1.573101] of_cfs_init
  195. [    1.573180] of_cfs_init: OK
  196. [    1.574031] Waiting for root device /dev/mmcblk0p2...
  197. [    1.585300] mmc0: host does not support reading read-only switch, assuming write-enable
  198. [    1.587340] mmc0: new high speed SDHC card at address 59b4
  199. [    1.587950] mmcblk0: mmc0:59b4 00000 29.8 GiB
  200. [    1.589388]  mmcblk0: p1 p2
  201. [    1.607287] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  202. [    1.608846] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  203. [    1.610395] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  204. [    1.613172] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  205. [    1.667767] Indeed it is in host mode hprt0 = 00021501
  206. [    1.703247] mmc1: new high speed SDIO card at address 0001
  207. [    1.732043] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  208. [    1.732057] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  209. [    1.847698] usb 1-1: new high-speed USB device number 2 using dwc_otg
  210. [    1.847833] Indeed it is in host mode hprt0 = 00001101
  211. [    2.047951] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  212. [    2.047973] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  213. [    2.048756] hub 1-1:1.0: USB hub found
  214. [    2.048853] hub 1-1:1.0: 5 ports detected
  215. [    2.327687] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  216. [    2.427928] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  217. [    2.427944] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  218. [    2.430663] smsc95xx v1.0.4
  219. [    2.490973] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d0:bb:ab
  220. [    3.530670] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
  221. [    3.530969] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
  222. [    3.530980] EXT4-fs (mmcblk0p2): recovery complete
  223. [    3.608265] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  224. [    3.608319] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  225. [    3.618926] devtmpfs: mounted
  226. [    3.619510] Freeing unused kernel memory: 476K (807d5000 - 8084c000)
  227. [    3.912252] random: systemd: uninitialized urandom read (16 bytes read, 75 bits of entropy available)
  228. [    3.916387] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  229. [    3.916720] systemd[1]: Detected architecture 'arm'.
  230. [    4.037577] NET: Registered protocol family 10
  231. [    4.039089] systemd[1]: Inserted module 'ipv6'
  232. [    4.040854] systemd[1]: Set hostname to <dwpi>.
  233. [    4.182368] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 77 bits of entropy available)
  234. [    4.358992] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
  235. [    4.360301] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
  236. [    4.361735] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
  237. [    4.381138] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
  238. [    4.381869] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
  239. [    4.382040] random: systemd: uninitialized urandom read (16 bytes read, 78 bits of entropy available)
  240. [    4.424430] random: systemd: uninitialized urandom read (16 bytes read, 79 bits of entropy available)
  241. [    4.427586] random: systemd: uninitialized urandom read (16 bytes read, 79 bits of entropy available)
  242. [    4.566034] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  243. [    4.566433] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  244. [    4.566511] systemd[1]: Starting Remote File Systems (Pre).
  245. [    4.566663] systemd[1]: Reached target Remote File Systems (Pre).
  246. [    4.566803] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  247. [    4.567272] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  248. [    4.567354] systemd[1]: Starting Encrypted Volumes.
  249. [    4.567423] systemd[1]: Reached target Encrypted Volumes.
  250. [    4.567506] systemd[1]: Starting Swap.
  251. [    4.567574] systemd[1]: Reached target Swap.
  252. [    4.567731] systemd[1]: Expecting device dev-mmcblk0p1.device...
  253. [    4.567808] systemd[1]: Starting Root Slice.
  254. [    4.567952] systemd[1]: Created slice Root Slice.
  255. [    4.568022] systemd[1]: Starting User and Session Slice.
  256. [    4.568254] systemd[1]: Created slice User and Session Slice.
  257. [    4.568327] systemd[1]: Starting Delayed Shutdown Socket.
  258. [    4.568493] systemd[1]: Listening on Delayed Shutdown Socket.
  259. [    4.568564] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  260. [    4.568745] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  261. [    4.568817] systemd[1]: Starting Journal Socket (/dev/log).
  262. [    4.569020] systemd[1]: Listening on Journal Socket (/dev/log).
  263. [    4.569111] systemd[1]: Starting udev Control Socket.
  264. [    4.569263] systemd[1]: Listening on udev Control Socket.
  265. [    4.569348] systemd[1]: Starting udev Kernel Socket.
  266. [    4.569468] systemd[1]: Listening on udev Kernel Socket.
  267. [    4.569560] systemd[1]: Starting Journal Socket.
  268. [    4.569745] systemd[1]: Listening on Journal Socket.
  269. [    4.569877] systemd[1]: Starting System Slice.
  270. [    4.570091] systemd[1]: Created slice System Slice.
  271. [    4.570207] systemd[1]: Starting File System Check on Root Device...
  272. [    4.618262] systemd[1]: Starting system-systemd\x2dfsck.slice.
  273. [    4.618684] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  274. [    4.618786] systemd[1]: Starting system-autologin.slice.
  275. [    4.619111] systemd[1]: Created slice system-autologin.slice.
  276. [    4.619297] systemd[1]: Starting Increase datagram queue length...
  277. [    4.621969] systemd[1]: Starting Restore / save the current clock...
  278. [    4.630029] systemd[1]: Mounted Huge Pages File System.
  279. [    4.631290] systemd[1]: Starting udev Coldplug all Devices...
  280. [    4.634326] systemd[1]: Mounting Debug File System...
  281. [    4.651131] systemd[1]: Started Set Up Additional Binary Formats.
  282. [    4.651610] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  283. [    4.654607] systemd[1]: Mounting POSIX Message Queue File System...
  284. [    4.701213] systemd[1]: Starting Load Kernel Modules...
  285. [    4.705543] systemd[1]: Starting Slices.
  286. [    4.705645] systemd[1]: Reached target Slices.
  287. [    4.709155] systemd[1]: Started Create list of required static device nodes for the current kernel.
  288. [    4.734128] systemd[1]: Starting Create Static Device Nodes in /dev...
  289. [    4.779620] systemd[1]: Started udev Coldplug all Devices.
  290. [    4.797368] fuse init (API version 7.23)
  291. [    4.811437] systemd[1]: Mounted POSIX Message Queue File System.
  292. [    4.811625] systemd[1]: Mounted Debug File System.
  293. [    4.813040] systemd[1]: Started Increase datagram queue length.
  294. [    4.825727] i2c /dev entries driver
  295. [    4.853855] systemd[1]: Started Load Kernel Modules.
  296. [    4.855569] systemd[1]: Started Restore / save the current clock.
  297. [    4.864864] systemd[1]: Time has been changed
  298. [    4.891893] systemd[1]: Mounting FUSE Control File System...
  299. [    4.918774] systemd[1]: Mounting Configuration File System...
  300. [    4.921305] systemd[1]: Starting Apply Kernel Variables...
  301. [    4.924372] systemd[1]: Starting Syslog Socket.
  302. [    4.924682] systemd[1]: Listening on Syslog Socket.
  303. [    4.924998] systemd[1]: Starting Journal Service...
  304. [    4.928547] systemd[1]: Started Journal Service.
  305. [    5.122454] systemd-udevd[137]: starting version 215
  306. [    5.560311] stmpe-spi spi0.1: unknown chip id: 0x0
  307. [    5.560351] stmpe-spi: probe of spi0.1 failed with error -22
  308. [    5.579637] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  309. [    5.582397] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
  310. [    5.596793] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  311. [    5.950208] fbtft: module is from the staging directory, the quality is unknown, you have been warned.
  312. [    5.981678] fb_hx8357d: module is from the staging directory, the quality is unknown, you have been warned.
  313. [    5.983325] fbtft_of_value: buswidth = 8
  314. [    5.983380] fbtft_of_value: debug = 0
  315. [    5.983393] fbtft_of_value: rotate = 270
  316. [    5.983404] fbtft_of_value: fps = 20
  317. [    5.995926] usbcore: registered new interface driver brcmfmac
  318. [    6.156622] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
  319. [    6.177195] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  320. [    6.277023] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  321. [    6.277050] cfg80211: World regulatory domain updated:
  322. [    6.277059] cfg80211:  DFS Master region: unset
  323. [    6.277068] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  324. [    6.277083] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  325. [    6.277095] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  326. [    6.277107] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  327. [    6.277122] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  328. [    6.277136] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  329. [    6.277149] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  330. [    6.277161] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  331. [    6.277173] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  332. [    6.553424] graphics fb1: fb_hx8357d frame buffer, 480x320, 300 KiB video memory, 4 KiB DMA buffer memory, fps=20, spi0.0 at 25 MHz
  333. [   10.884754] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  334. [   11.146623] systemd-journald[133]: Received request to flush runtime journal from PID 1
  335. [   12.061760] random: nonblocking pool is initialized
  336. [   12.548025] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
  337. [   12.548053] brcmfmac: brcmf_add_if: ignore IF event
  338. [   12.553546] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  339. [   12.553600] brcmfmac: power management disabled
  340. [   12.973755] cfg80211: Regulatory domain changed to country: GB
  341. [   12.973779] cfg80211:  DFS Master region: ETSI
  342. [   12.973788] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  343. [   12.973803] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  344. [   12.973819] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  345. [   12.973834] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  346. [   12.973847] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
  347. [   12.973859] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  348. [   13.972945] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  349. [   14.006197] cfg80211: Regulatory domain changed to country: US
  350. [   14.006222] cfg80211:  DFS Master region: FCC
  351. [   14.006232] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  352. [   14.006246] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  353. [   14.006261] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
  354. [   14.006277] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  355. [   14.006289] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  356. [   14.006302] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  357. [   19.437733] uart-pl011 3f201000.uart: no DMA platform data
  358. [   19.794115] Adding 102396k swap on /var/swap.  Priority:-1 extents:3 across:307196k SSFS
  359. [   20.290057] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  360. [   20.290309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  361. [   21.893896] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  362. [   21.896975] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
  363. [   24.046289] Bluetooth: Core ver 2.21
  364. [   24.046398] NET: Registered protocol family 31
  365. [   24.046408] Bluetooth: HCI device and connection manager initialized
  366. [   24.047247] Bluetooth: HCI socket layer initialized
  367. [   24.047268] Bluetooth: L2CAP socket layer initialized
  368. [   24.047304] Bluetooth: SCO socket layer initialized
  369. [   24.077147] Bluetooth: HCI UART driver ver 2.3
  370. [   24.077172] Bluetooth: HCI UART protocol H4 registered
  371. [   24.077182] Bluetooth: HCI UART protocol Three-wire (H5) registered
  372. [   24.077367] Bluetooth: HCI UART protocol BCM registered
  373. [   24.414669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  374. [   24.414688] Bluetooth: BNEP filters: protocol multicast
  375. [   24.414712] Bluetooth: BNEP socket layer initialized
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!