Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [CODE][root@NASty] ~# dmesg
- Copyright (c) 1992-2014 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.3-RELEASE-p16 #1 r281084+74d0d7a: Mon Jun 29 14:32:16 PDT 2015
- root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
- gcc version 4.2.1 20070831 patched [FreeBSD]
- CPU: Intel(R) Atom(TM) CPU C2550 @ 2.40GHz (2400.14-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x406d8 Family = 0x6 Model = 0x4d Stepping = 8
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x101<LAHF,Prefetch>
- Standard Extended Features=0x2282<TSCADJ,SMEP,ENHMOVSB>
- TSC: P-state invariant, performance statistics
- real memory = 36507222016 (34816 MB)
- avail memory = 33110650880 (31576 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <INTEL TIANO >
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 2
- cpu2 (AP): APIC ID: 4
- cpu3 (AP): APIC ID: 6
- WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
- ACPI Warning: FADT (revision 5) is longer than ACPI 5.0 version, truncating length 268 to 256 (20111123/tbfadt-325)
- ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20111123/tbfadt-658)
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- ispfw: registered firmware <isp_1040>
- ispfw: registered firmware <isp_1040_it>
- ispfw: registered firmware <isp_1080>
- ispfw: registered firmware <isp_1080_it>
- ispfw: registered firmware <isp_12160>
- ispfw: registered firmware <isp_12160_it>
- ispfw: registered firmware <isp_2100>
- ispfw: registered firmware <isp_2200>
- ispfw: registered firmware <isp_2300>
- ispfw: registered firmware <isp_2322>
- ispfw: registered firmware <isp_2400>
- ispfw: registered firmware <isp_2400_multi>
- ispfw: registered firmware <isp_2500>
- ispfw: registered firmware <isp_2500_multi>
- kbd1 at kbdmux0
- cryptosoft0: <software crypto> on motherboard
- aesni0: <AES-CBC,AES-XTS> on motherboard
- padlock0: No ACE support.
- acpi0: <ALASKA A M I > on motherboard
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> mem 0xdf640000-0xdf65ffff irq 16 at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> mem 0xdf620000-0xdf63ffff irq 20 at device 3.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> mem 0xdf400000-0xdf41ffff irq 22 at device 0.0 on pci2
- pci3: <ACPI PCI bus> on pcib3
- pcib4: <PCI-PCI bridge> irq 23 at device 1.0 on pci3
- pci4: <PCI bus> on pcib4
- ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f mem 0xdf310000-0xdf3101ff irq 23 at device 0.0 on pci4
- ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- pcib5: <PCI-PCI bridge> irq 23 at device 5.0 on pci3
- pci5: <PCI bus> on pcib5
- pcib6: <PCI-PCI bridge> irq 23 at device 0.0 on pci5
- pci6: <PCI bus> on pcib6
- vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 23 at device 0.0 on pci6
- vgapci0: Boot video device
- pcib7: <PCI-PCI bridge> irq 21 at device 7.0 on pci3
- pci7: <PCI bus> on pcib7
- pcib8: <PCI-PCI bridge> irq 23 at device 9.0 on pci3
- pci8: <PCI bus> on pcib8
- igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xa000-0xa01f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff irq 23 at device 0.0 on pci8
- igb0: Using MSIX interrupts with 5 vectors
- igb0: Ethernet address: d0:50:99:26:56:b5
- igb0: Bound queue 0 to cpu 0
- igb0: Bound queue 1 to cpu 1
- igb0: Bound queue 2 to cpu 2
- igb0: Bound queue 3 to cpu 3
- pcib9: <ACPI PCI-PCI bridge> mem 0xdf600000-0xdf61ffff at device 4.0 on pci0
- pci9: <ACPI PCI bus> on pcib9
- ahci1: <Marvell 88SE9230 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf510000-0xdf5107ff irq 23 at device 0.0 on pci9
- ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
- ahci1: quirks=0x900<NOBSYRES,ALTSIG>
- ahcich2: <AHCI channel> at channel 0 on ahci1
- ahcich3: <AHCI channel> at channel 1 on ahci1
- ahcich4: <AHCI channel> at channel 2 on ahci1
- ahcich5: <AHCI channel> at channel 3 on ahci1
- ahcich6: <AHCI channel> at channel 4 on ahci1
- ahcich7: <AHCI channel> at channel 5 on ahci1
- ahcich8: <AHCI channel> at channel 6 on ahci1
- ahcich9: <AHCI channel> at channel 7 on ahci1
- ehci0: <Intel Avoton USB 2.0 controller> mem 0xdf663000-0xdf6633ff irq 23 at device 22.0 on pci0
- usbus0: EHCI version 1.0
- usbus0 on ehci0
- ahci2: <Intel Avoton AHCI SATA controller> port 0xe0d0-0xe0d7,0xe0c0-0xe0c3,0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe040-0xe05f mem 0xdf662000-0xdf6627ff irq 19 at device 23.0 on pci0
- ahci2: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
- ahcich10: <AHCI channel> at channel 0 on ahci2
- ahcich11: <AHCI channel> at channel 1 on ahci2
- ahcich12: <AHCI channel> at channel 2 on ahci2
- ahcich13: <AHCI channel> at channel 3 on ahci2
- ahci3: <Intel Avoton AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe070-0xe077,0xe060-0xe063,0xe020-0xe03f mem 0xdf661000-0xdf6617ff irq 19 at device 24.0 on pci0
- ahci3: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
- ahcich14: <AHCI channel> at channel 0 on ahci3
- ahcich15: <AHCI channel> at channel 1 on ahci3
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: CGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff
- coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- coretemp2: <CPU On-Die Thermal Sensors> on cpu2
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- coretemp3: <CPU On-Die Thermal Sensors> on cpu3
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- Timecounters tick every 1.000 msec
- ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
- usbus0: 480Mbps High Speed USB v2.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- uhub0: 8 ports with 8 removable, self powered
- ugen0.2: <vendor 0x8087> at usbus0
- uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus0
- uhub1: 4 ports with 4 removable, self powered
- ugen0.3: <vendor 0x1a40> at usbus0
- uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus0
- uhub2: 4 ports with 4 removable, self powered
- ugen0.4: <vendor 0x13fe> at usbus0
- umass0: <vendor 0x13fe USB DISK 3.0, class 0/0, rev 2.10/1.00, addr 4> on usbus0
- umass0: SCSI over Bulk-Only; quirks = 0x8100
- umass0:17:0:-1: Attached to scbus17
- ugen0.5: <No brand> at usbus0
- ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> on usbus0
- kbd2 at ukbd0
- ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> on usbus0
- ums0: 5 buttons and [XYZ] coordinates ID=1
- ugen0.6: <vendor 0x13fe> at usbus0
- umass1: <vendor 0x13fe USB DISK 3.0, class 0/0, rev 2.10/1.00, addr 6> on usbus0
- umass1: SCSI over Bulk-Only; quirks = 0x8100
- umass1:18:1:-1: Attached to scbus18
- ugen0.7: <American Megatrends Inc.> at usbus0
- uhub3: <7-port Hub> on usbus0
- uhub3: 5 ports with 5 removable, self powered
- ugen0.8: <American Megatrends Inc.> at usbus0
- ukbd1: <Keyboard Interface> on usbus0
- kbd3 at ukbd1
- ums1: <Mouse Interface> on usbus0
- ums1: 3 buttons and [Z] coordinates ID=0
- ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada0: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9da0 at umass-sim0 bus 0 scbus17 target 0 lun 0
- da0: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
- da0: Serial Number 070D51A98CED3994
- da0: 40.000MB/s transfers
- da0: 7385MB (15124992 512 byte sectors: 255H 63S/T 941C)
- da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
- da1 at umass-sim1 bus 1 scbus18 target 0 lun 0
- da1: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
- da1: Serial Number 070D51A9B1ED3961
- da1: 40.000MB/s transfers
- da1: 7385MB (15124992 512 byte sectors: 255H 63S/T 941C)
- da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
- SATA 3.x device
- ada0: Serial Number WD-WMC4N2082018
- ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada0: quirks=0x1<4K>
- ada0: Previously was known as ad6
- ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
- ada1: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
- ada1: Serial Number WD-WMC4N2081689
- ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada1: quirks=0x1<4K>
- ada1: Previously was known as ad8
- ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
- ada2: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
- ada2: Serial Number WD-WMC1T2003884
- ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada2: Command Queueing enabled
- ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada2: quirks=0x1<4K>
- ada2: Previously was known as ad10
- ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
- ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
- ada3: Serial Number WD-WMC1T2180557
- ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada3: Command Queueing enabled
- ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada3: quirks=0x1<4K>
- ada3: Previously was known as ad12
- ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
- ada4: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
- ada4: Serial Number WD-WMC4N1946483
- ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada4: Command Queueing enabled
- ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada4: quirks=0x1<4K>
- ada4: Previously was known as ad14
- pass5 at ahcich9 bus 0 scbus9 target 0 lun 0
- pass5: <Marvell Console 1.01> Removable Processor SCSI-0 device
- pass5: Serial Number HKDP221516WL
- pass5: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- Timecounter "TSC-low" frequency 1200071472 Hz quality 1000
- Trying to mount root from zfs:freenas-boot/ROOT/default []...
- GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
- wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff
- vboxdrv: fAsync=0 offMin=0x528 offMax=0x1068
- [root@NASty] ~# [root@NASty] ~# dmesg
- DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x101<LAHF,Prefetch>
- Standard Extended Features=0x2282<TSCADJ,SMEP,ENHMOVSB>
- TSC: P-state invariant, performance statistics
- real memory = 36507222016 (34816 MB)
- avail memory = 33110650880 (31576 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <INTEL TIANO >
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- [root@NASty]: No match.
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 2
- cpu2 (AP): APIC ID: 4
- cpu3 (AP): APIC ID: 6
- WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
- ACPI Warning: FADT (revision 5) is longer than ACPI 5.0 version, truncating length 268 to 256 (20111123/tbfadt-325)
- ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20111123/tbfadt-658)
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- ispfw: registered firmware <isp_1040>
- ispfw: registered firmware <isp_1040_it>
- ispfw: registered firmware <isp_1080>
- ispfw: registered firmware <isp_1080_it>
- ispfw: registered firmware <isp_12160>
- ispfw: registered firmware <isp_12160_it>
- ispfw: registered firmware <isp_2100>
- [root@NASty] ~# ispfw: registered firmware <isp_2200>
- ispfw: registered firmware <isp_2300>
- ispfw: registered firmware <isp_2322>
- ispfw: registered firmware <isp_2400>
- ispfw: registered firmware <isp_2400_multi>
- ispfw: registered firmware <isp_2500>
- ispfw: registered firmware <isp_2500_multi>
- kbd1 at kbdmux0
- cryptosoft0: <software crypto> on motherboard
- aesni0: <AES-CBC,AES-XTS> on motherboard
- padlock0: No ACE support.
- acpi0: <ALASKA A M I > on motherboard
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
- atrtc0: Warning: Couldn't map I/O.
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- Copyright (c) 1992-2014 The FreeBSD Project.
- Badly placed ()'s.
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> mem 0xdf640000-0xdf65ffff irq 16 at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- pcib2: <ACPI PCI-PCI bridge> mem 0xdf620000-0xdf63ffff irq 20 at device 3.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> mem 0xdf400000-0xdf41ffff irq 22 at device 0.0 on pci2
- pci3: <ACPI PCI bus> on pcib3
- pcib4: <PCI-PCI bridge> irq 23 at device 1.0 on pci3
- pci4: <PCI bus> on pcib4
- ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f mem 0xdf310000-0xdf3101ff irq 23 at device 0.0 on pci4
- ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- pcib5: <PCI-PCI bridge> irq 23 at device 5.0 on pci3
- pci5: <PCI bus> on pcib5
- pcib6: <PCI-PCI bridge> irq 23 at device 0.0 on pci5
- pci6: <PCI bus> on pcib6
- vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 23 at device 0.0 on pci6
- vgapci0: Boot video [root@NASty] ~# device
- pcib7: <PCI-PCI bridge> irq 21 at device 7.0 on pci3
- pci7: <PCI bus> on pcib7
- pcib8: <PCI-PCI bridge> irq 23 at device 9.0 on pci3
- pci8: <PCI bus> on pcib8
- igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xa000-0xa01f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff irq 23 at device 0.0 on pci8
- igb0: Using MSIX interrupts with 5 vectors
- igb0: Ethernet address: d0:50:99:26:56:b5
- igb0: Bound queue 0 to cpu 0
- igb0: Bound queue 1 to cpu 1
- igb0: Bound queue 2 to cpu 2
- igb0: Bound queue 3 to cpu 3
- pcib9: <ACPI PCI-PCI bridge> mem 0xdf600000-0xdf61ffff at device 4.0 on pci0
- pci9: <ACPI PCI bus> on pcib9
- ahci1: <Marvell 88SE9230 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf510000-0xdf5107ff irq 23 at device 0.0 on pci9
- ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
- ahci1: quirks=0x900<NOBSYRES,ALTSIG>
- ahcich2: <AHCI channel> at channel 0 on ahci1
- ahcich3: <AHCI channel> at channel 1 on ahci1
- ahcich4: <AHCI channel> at channel 2 on ahci1
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- Badly placed ()'s.
- ahcich5: <AHCI channel> at channel 3 on ahci1
- ahcich6: <AHCI channel> at channel 4 on ahci1
- ahcich7: <AHCI channel> at channel 5 on ahci1
- ahcich8: <AHCI channel> at channel 6 on ahci1
- ahcich9: <AHCI channel> at channel 7 on ahci1
- ehci0: <Intel Avoton USB 2.0 controller> mem 0xdf663000-0xdf6633ff irq 23 at device 22.0 on pci0
- usbus0: EHCI version 1.0
- usbus0 on ehci0
- ahci2: <Intel Avoton AHCI SATA controller> port 0xe0d0-0xe0d7,0xe0c0-0xe0c3,0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe040-0xe05f mem 0xdf662000-0xdf6627ff irq 19 at device 23.0 on pci0
- ahci2: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
- ahcich10: <AHCI channel> at channel 0 on ahci2
- ahcich11: <AHCI channel> at channel 1 on ahci2
- ahcich12: <AHCI channel> at channel 2 on ahci2
- ahcich13: <AHCI channel> at channel 3 on ahci2
- ahci3: <Intel Avoton AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe070-0xe077,0xe060-0xe063,0xe020-0xe03f mem 0xdf661000-0xdf6617ff irq 19 at device 24.0 on pci0
- ahci3: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
- ahcich14: <AHCI channel> at channel 0 on ahci3
- ahcich15: <AHCI channel> at channel 1 on ahci3
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: CGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at[root@NASty] ~# atkbd0
- atkbd0: [GIANT-LOCKED]
- wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff
- coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- coretemp2: <CPU On-Die Thermal Sensors> on cpu2
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- coretemp3: <CPU On-Die Thermal Sensors> on cpu3
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- Timecounters tick every 1.000 msec
- ipfw2 (+ipv6) initialized, divert enabled, nat enabled, The Regents of the University of California. All rights reserved.
- The: Command not found.
- [root@NASty] ~# default to accept, logging disabled
- usbus0: 480Mbps High Speed USB v2.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel EHCI root HUB,FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD: Command not found.
- [root@NASty] ~# FreeBSD 9.3-RELEASE-p16 #1 r281084+74d0d7a: Mon Jun 29 14:32:16 PDT 2015
- FreeBSD: Command not found.
- [root@NASty] ~# class 9/0, rev 2.00/1.00, addr 1> on usbus0
- uhub0: 8 ports with 8 removable, self powered
- ugen0.2: <vendor 0x8087> at usbus0
- uh root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
- root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENAS.amd64: Command not found.
- [root@NASty] ~# ub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus0
- uhub1: 4 ports with 4 removable, self powered
- uggcc version 4.2.1 20070831 patched [FreeBSD]
- gcc: No match.
- [root@NASty] ~# CPU: Intel(R) Atom(TM) CPU C2550 @ 2.40GHz (2400.14-MHz K8-class CPU)
- Badly placed (.
- [root@NASty] ~# en0.3: <vendor 0x1a40> at usbus0
- uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus0
- uhub2: 4 ports w Origin = "GenuineIntel" Id = 0x406d8 Family = 0x6 Model = 0x4d Stepping = 8
- Origin: Command not found.
- [root@NASty] ~# ith 4 removable, self powered
- ugen0.4: <vendor 0x13fe> at usbus0
- umass0: <vendor 0x13fe USB DISK 3.0, class 0/0, rev 2.10/1.00, Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Missing name for redirect.
- [root@NASty] ~# addr 4> on usbus0
- umass0: SCSI over Bulk-Only; quirks = 0x8100
- umass0:17:0:-1: Attached to scbus17
- ugen0.5: <No brand> at usbus Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
- Missing name for redirect.
- [root@NASty] ~# AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- Missing name for redirect.
- [root@NASty] ~# 0
- ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> on usbus0
- kbd2 at ukbd0
- ums0: <No brand KVM, class 0/0, rev 1.10/0.00, AMD Features2=0x101<LAHF,Prefetch>
- Missing name for redirect.
- [root@NASty] ~# Standard Extended Features=0x2282<TSCADJ,SMEP,ENHMOVSB>
- Missing name for redirect.
- [root@NASty] ~# addr 5> on usbus0
- ums0: 5 buttons and [XYZ] coordinates ID=1
- ugen0.6: <vendor 0x13fe> at usbus0
- umass1: <vendor 0x13fe USB DISK TSC: P-state invariant, performance statistics
- TSC:: Too many arguments.
- [root@NASty] ~# real memory = 36507222016 (34816 MB)
- CORRECT>read memory = 36507222016 (34816 MB) (y|n|e|a)? abort
- [root@NASty] ~# vail memory = 33110650880 (31576 MB)
- CORRECT>tail memory = 33110650880 (31576 MB) (y|n|e|a)? no
- Badly placed ()'s.
- [root@NASty] ~# vent timer "LAPIC" quality 600
- vent: Command not found.
- [root@NASty] ~# 3.0, class 0/0, rev 2.10/1.00, addr 6> on usbus0
- umass1: SCSI over Bulk-Only; quirks = 0x8100
- umass1:18:1:-1: Attached to scbuACPI APIC Table: <INTEL TIANO >
- Missing name for redirect.
- [root@NASty] ~# FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP:: Too many arguments.
- [root@NASty] ~# FreeBSD/SMP: 1 package(s) x 4 core(s)
- Badly placed (.
- [root@NASty] ~# s18
- ugen0.7: <American Megatrends Inc.> at usbus0
- uhub3: <7-port Hub> on usbus0
- uhub3: 5 ports with 5 removable, self powered
- ug cpu0 (BSP): APIC ID: 0
- Badly placed ()'s.
- [root@NASty] ~# cpu1 (AP): APIC ID: 2
- Badly placed ()'s.
- [root@NASty] ~# cpu2 (AP): APIC ID: 4
- Badly placed ()'s.
- [root@NASty] ~# cpu3 (AP): APIC ID: 6
- Badly placed ()'s.
- [root@NASty] ~# en0.8: <American Megatrends Inc.> at usbus0
- ukbd1: <Keyboard Interface> on usbus0
- kbd3 at ukbd1
- ums1: <Mouse Interface> on usbusWARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
- Badly placed ()'s.
- [root@NASty] ~# 0
- ums1: 3 buttons and [Z] coordinates ID=0
- ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada0: <WDC WD30EFRX-68EUZN0 80.00A80> ATAACPI Warning: FADT (revision 5) is longer than ACPI 5.0 version, truncating length 268 to 256 (20111123/tbfadt-325)
- Badly placed (.
- [root@NASty] ~# ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20111123/tbfadt-658)
- Badly placed ()'s.
- [root@NASty] ~# -9da0 at umass-sim0 bus 0 scbus17 target 0 lun 0
- da0: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
- da0: Serial Numioapic0 <Version 2.0> irqs 0-23 on motherboard
- Version: No such file or directory.
- [root@NASty] ~# ispfw: registered firmware <isp_1040>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_1040_it>
- Missing name for redirect.
- [root@NASty] ~# ber 070D51A98CED3994
- da0: 40.000MB/s transfers
- da0: 7385MB (15124992 512 byte sectors: 255H 63S/T 941C)
- da0: quirks=0x3<NO_SYNC_ispfw: registered firmware <isp_1080>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_1080_it>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_12160>
- Missing name for redirect.
- [root@NASty] ~# CACHE,NO_6_BYTE>
- da1 at umass-sim1 bus 1 scbus18 target 0 lun 0
- da1: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
- ispfw: registered firmware <isp_12160_it>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_2100>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_2200>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_2300>
- Missing name for redirect.
- [root@NASty] ~# da1: Serial Number 070D51A9B1ED3961
- da1: 40.000MB/s transfers
- da1: 7385MB (15124992 512 byte sectors: 255H 63S/T 941C)
- da1: quirispfw: registered firmware <isp_2322>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_2400>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_2400_multi>
- Missing name for redirect.
- [root@NASty] ~# ks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
- SATA 3.x device
- ada0: Serial Number WD-WMC4N2082018
- ada0: 600.000MB/s transfers (SATA 3.x, UDMAispfw: registered firmware <isp_2500>
- Missing name for redirect.
- [root@NASty] ~# ispfw: registered firmware <isp_2500_multi>
- Missing name for redirect.
- [root@NASty] ~# kbd1 at kbdmux0
- kbd1: Command not found.
- [root@NASty] ~# 6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada0: quirks=0xcryptosoft0: <software crypto> on motherboard
- software: No such file or directory.
- [root@NASty] ~# aesni0: <AES-CBC,AES-XTS> on motherboard
- AES-CBC,AES-XTS: No such file or directory.
- [root@NASty] ~# padlock0: No ACE support.
- padlock0:: Too many arguments.
- [root@NASty] ~# acpi0: <ALASKA A M I > on motherboard
- ALASKA: No such file or directory.
- [root@NASty] ~# 1<4K>
- ada0: Previously was known as ad6
- ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
- ada1: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 acpi0: Power Button (fixed)
- Badly placed ()'s.
- [root@NASty] ~# cpu0: <ACPI CPU> on acpi0
- ACPI: No such file or directory.
- [root@NASty] ~# cpu1: <ACPI CPU> on acpi0
- ACPI: No such file or directory.
- [root@NASty] ~# cpu2: <ACPI CPU> on acpi0
- ACPI: No such file or directory.
- [root@NASty] ~# cpu3: <ACPI CPU> on acpi0
- ACPI: No such file or directory.
- [root@NASty] ~# SATA 3.x device
- ada1: Serial Number WD-WMC4N2081689
- ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada1: Command Qhpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- High: No such file or directory.
- [root@NASty] ~# Timecounter "HPET" frequency 14318180 Hz quality 950
- Timecounter: Command not found.
- [root@NASty] ~# ueueing enabled
- ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada1: quirks=0x1<4K>
- ada1: Previously was known Event timer "HPET" frequency 14318180 Hz quality 450
- Event: Command not found.
- [root@NASty] ~# Event timer "HPET1" frequency 14318180 Hz quality 440
- Event: Command not found.
- [root@NASty] ~# as ad8
- ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
- ada2: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
- ada2: Serial NumbEvent timer "HPET2" frequency 14318180 Hz quality 440
- Event: Command not found.
- [root@NASty] ~# atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
- AT: No such file or directory.
- [root@NASty] ~# atrtc0: Warning: Couldn't map I/O.
- Unmatched '.
- [root@NASty] ~# er WD-WMC1T2003884
- ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada2: Command Queueing enabled
- ada2: 2861588MB (Event timer "RTC" frequency 32768 Hz quality 0
- Event: Command not found.
- [root@NASty] ~# attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
- AT: No such file or directory.
- [root@NASty] ~# 5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada2: quirks=0x1<4K>
- ada2: Previously was known as ad10
- ada3 at ahcich4 bus 0 scbTimecounter "i8254" frequency 1193182 Hz quality 0
- Timecounter: Command not found.
- [root@NASty] ~# Event timer "i8254" frequency 1193182 Hz quality 100
- Event: Command not found.
- [root@NASty] ~# Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- Timecounter: Command not found.
- [root@NASty] ~# us4 target 0 lun 0
- ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
- ada3: Serial Number WD-WMC1T2180557
- ada3: 600.000acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- 24-bit: No such file or directory.
- [root@NASty] ~# pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- ACPI: No such file or directory.
- [root@NASty] ~# MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada3: Command Queueing enabled
- ada3: 2861588MB (5860533168 512 byte sectors: 16Hpci0: <ACPI PCI bus> on pcib0
- ACPI: No such file or directory.
- [root@NASty] ~# pcib1: <ACPI PCI-PCI bridge> mem 0xdf640000-0xdf65ffff irq 16 at device 1.0 on pci0
- ACPI: No such file or directory.
- [root@NASty] ~# 63S/T 16383C)
- ada3: quirks=0x1<4K>
- ada3: Previously was known as ad12
- ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
- ada4: <WDC WDpci1: <ACPI PCI bus> on pcib1
- ACPI: No such file or directory.
- [root@NASty] ~# pcib2: <ACPI PCI-PCI bridge> mem 0xdf620000-0xdf63ffff irq 20 at device 3.0 on pci0
- ACPI: No such file or directory.
- [root@NASty] ~# pci2: <ACPI PCI bus> on pcib2
- ACPI: No such file or directory.
- [root@NASty] ~# 30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
- ada4: Serial Number WD-WMC4N1946483
- ada4: 600.000MB/s transfers (SATA 3.x, UDMA6,pcib3: <ACPI PCI-PCI bridge> mem 0xdf400000-0xdf41ffff irq 22 at device 0.0 on pci2
- ACPI: No such file or directory.
- [root@NASty] ~# pci3: <ACPI PCI bus> on pcib3
- ACPI: No such file or directory.
- [root@NASty] ~# PIO 8192bytes)
- ada4: Command Queueing enabled
- ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada4: quirks=0x1<pcib4: <PCI-PCI bridge> irq 23 at device 1.0 on pci3
- PCI-PCI: No such file or directory.
- [root@NASty] ~# pci4: <PCI bus> on pcib4
- PCI: No such file or directory.
- [root@NASty] ~# 4K>
- ada4: Previously was known as ad14
- pass5 at ahcich9 bus 0 scbus9 target 0 lun 0
- pass5: <Marvell Console 1.01> Removable Procahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f mem 0xdf310000-0xdf3101ff irq 23 at device 0.0 on pci4
- Marvell: No such file or directory.
- [root@NASty] ~# essor SCSI-0 device
- pass5: Serial Number HKDP221516WL
- pass5: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192byteahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS
- ahci0:: Too many arguments.
- [root@NASty] ~# ahcich0: <AHCI channel> at channel 0 on ahci0
- AHCI: No such file or directory.
- [root@NASty] ~# s)
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- Timecounter "TSC-low" frequency 1200071472 Hz qualahcich1: <AHCI channel> at channel 1 on ahci0
- AHCI: No such file or directory.
- [root@NASty] ~# pcib5: <PCI-PCI bridge> irq 23 at device 5.0 on pci3
- PCI-PCI: No such file or directory.
- [root@NASty] ~# pci5: <PCI bus> on pcib5
- PCI: No such file or directory.
- [root@NASty] ~# ity 1000
- Trying to mount root from zfs:freenas-boot/ROOT/default []...
- GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev fpcib6: <PCI-PCI bridge> irq 23 at device 0.0 on pci5
- PCI-PCI: No such file or directory.
- [root@NASty] ~# pci6: <PCI bus> on pcib6
- PCI: No such file or directory.
- [root@NASty] ~# 91e28e40bf7)
- wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff
- vboxdrv: fAsync=0 offMin=0x528 offMvgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 23 at device 0.0 on pci6
- VGA-compatible: No such file or directory.
- [root@NASty] ~# vgapci0: Boot video device
- vgapci0:: Too many arguments.
- [root@NASty] ~# pcib7: <PCI-PCI bridge> irq 21 at device 7.0 on pci3
- PCI-PCI: No such file or directory.
- [root@NASty] ~# ax=0x1068
- pci7: <PCI bus> on pcib7
- PCI: No such file or directory.
- [root@NASty] ~# pcib8: <PCI-PCI bridge> irq 23 at device 9.0 on pci3
- PCI-PCI: No such file or directory.
- [root@NASty] ~# pci8: <PCI bus> on pcib8
- PCI: No such file or directory.
- [root@NASty] ~# igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xa000-0xa01f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff irq 23 at device 0.0 on pci8
- Badly placed ()'s.
- [root@NASty] ~# igb0: Using MSIX interrupts with 5 vectors
- igb0:: Too many arguments.
- [root@NASty] ~# igb0: Ethernet address: d0:50:99:26:56:b5
- igb0:: Too many arguments.
- [root@NASty] ~# igb0: Bound queue 0 to cpu 0
- igb0:: Too many arguments.
- [root@NASty] ~# igb0: Bound queue 1 to cpu 1
- igb0:: Too many arguments.
- [root@NASty] ~# igb0: Bound queue 2 to cpu 2
- igb0:: Too many arguments.
- [root@NASty] ~# igb0: Bound queue 3 to cpu 3
- igb0:: Too many arguments.
- [root@NASty] ~# pcib9: <ACPI PCI-PCI bridge> mem 0xdf600000-0xdf61ffff at device 4.0 on pci0
- ACPI: No such file or directory.
- [root@NASty] ~# pci9: <ACPI PCI bus> on pcib9
- ACPI: No such file or directory.
- [root@NASty] ~# ahci1: <Marvell 88SE9230 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf510000-0xdf5107ff irq 23 at device 0.0 on pci9
- Marvell: No such file or directory.
- [root@NASty] ~# ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
- ahci1:: Too many arguments.
- [root@NASty] ~# ahci1: quirks=0x900<NOBSYRES,ALTSIG>
- Missing name for redirect.
- [root@NASty] ~# ahcich2: <AHCI channel> at channel 0 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich3: <AHCI channel> at channel 1 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich4: <AHCI channel> at channel 2 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich5: <AHCI channel> at channel 3 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich6: <AHCI channel> at channel 4 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich7: <AHCI channel> at channel 5 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich8: <AHCI channel> at channel 6 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich9: <AHCI channel> at channel 7 on ahci1
- AHCI: No such file or directory.
- [root@NASty] ~# ehci0: <Intel Avoton USB 2.0 controller> mem 0xdf663000-0xdf6633ff irq 23 at device 22.0 on pci0
- Intel: No such file or directory.
- [root@NASty] ~# usbus0: EHCI version 1.0
- usbus0:: Too many arguments.
- [root@NASty] ~# usbus0 on ehci0
- usbus0: Command not found.
- [root@NASty] ~# ahci2: <Intel Avoton AHCI SATA controller> port 0xe0d0-0xe0d7,0xe0c0-0xe0c3,0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe040-0xe05f mem 0xdf662000-0xdf6627ff irq 19 at device 23.0 on pci0
- Intel: No such file or directory.
- [root@NASty] ~# ahci2: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
- ahci2:: Too many arguments.
- [root@NASty] ~# ahcich10: <AHCI channel> at channel 0 on ahci2
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich11: <AHCI channel> at channel 1 on ahci2
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich12: <AHCI channel> at channel 2 on ahci2
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich13: <AHCI channel> at channel 3 on ahci2
- AHCI: No such file or directory.
- [root@NASty] ~# ahci3: <Intel Avoton AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe070-0xe077,0xe060-0xe063,0xe020-0xe03f mem 0xdf661000-0xdf6617ff irq 19 at device 24.0 on pci0
- Intel: No such file or directory.
- [root@NASty] ~# ahci3: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
- ahci3:: Too many arguments.
- [root@NASty] ~# ahcich14: <AHCI channel> at channel 0 on ahci3
- AHCI: No such file or directory.
- [root@NASty] ~# ahcich15: <AHCI channel> at channel 1 on ahci3
- AHCI: No such file or directory.
- [root@NASty] ~# isab0: <PCI-ISA bridge> at device 31.0 on pci0
- PCI-ISA: No such file or directory.
- [root@NASty] ~# isa0: <ISA bus> on isab0
- ISA: No such file or directory.
- [root@NASty] ~# orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
- ISA: No such file or directory.
- [root@NASty] ~# sc0: <System console> at flags 0x100 on isa0
- System: No such file or directory.
- [root@NASty] ~# sc0: CGA <16 virtual consoles, flags=0x300>
- Missing name for redirect.
- [root@NASty] ~# vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
- Generic: No such file or directory.
- [root@NASty] ~# atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- Badly placed ()'s.
- [root@NASty] ~# atkbd0: <AT Keyboard> irq 1 on atkbdc0
- AT: No such file or directory.
- [root@NASty] ~# kbd0 at atkbd0
- kbd0: Command not found.
- [root@NASty] ~# atkbd0: [GIANT-LOCKED]
- atkbd0:: Too many arguments.
- [root@NASty] ~# wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff
- wbwd0:: Too many arguments.
- [root@NASty] ~# coretemp0: <CPU On-Die Thermal Sensors> on cpu0
- CPU: No such file or directory.
- [root@NASty] ~# est0: <Enhanced SpeedStep Frequency Control> on cpu0
- Enhanced: No such file or directory.
- [root@NASty] ~# coretemp1: <CPU On-Die Thermal Sensors> on cpu1
- CPU: No such file or directory.
- [root@NASty] ~# est1: <Enhanced SpeedStep Frequency Control> on cpu1
- Enhanced: No such file or directory.
- [root@NASty] ~# coretemp2: <CPU On-Die Thermal Sensors> on cpu2
- CPU: No such file or directory.
- [root@NASty] ~# est2: <Enhanced SpeedStep Frequency Control> on cpu2
- Enhanced: No such file or directory.
- [root@NASty] ~# coretemp3: <CPU On-Die Thermal Sensors> on cpu3
- CPU: No such file or directory.
- [root@NASty] ~# est3: <Enhanced SpeedStep Frequency Control> on cpu3
- Enhanced: No such file or directory.
- [root@NASty] ~# ZFS filesystem version: 5
- ZFS: Command not found.
- [root@NASty] ~# ZFS storage pool version: features support (5000)
- Badly placed ()'s.
- [root@NASty] ~# Timecounters tick every 1.000 msec
- Timecounters: Command not found.
- [root@NASty] ~# ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
- CORRECT>ipfw (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled (y|n|e|a)? no
- Badly placed ()'s.
- [root@NASty] ~# sbus0: 480Mbps High Speed USB v2.0
- sbus0:: Too many arguments.
- [root@NASty] ~# ugen0.1: <Intel> at usbus0
- Intel: No such file or directory.
- [root@NASty] ~# uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- Intel: No such file or directory.
- [root@NASty] ~# uhub0: 8 ports with 8 removable, self powered
- uhub0:: Too many arguments.
- [root@NASty] ~# ugen0.2: <vendor 0x8087> at usbus0
- vendor: No such file or directory.
- [root@NASty] ~# uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus0
- vendor: No such file or directory.
- [root@NASty] ~# uhub1: 4 ports with 4 removable, self powered
- uhub1:: Too many arguments.
- [root@NASty] ~# ugen0.3: <vendor 0x1a40> at usbus0
- vendor: No such file or directory.
- [root@NASty] ~# uhub2: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 3> on usbus0
- vendor: No such file or directory.
- [root@NASty] ~# uhub2: 4 ports with 4 removable, self powered
- uhub2:: Too many arguments.
- [root@NASty] ~# ugen0.4: <vendor 0x13fe> at usbus0
- vendor: No such file or directory.
- [root@NASty] ~# umass0: <vendor 0x13fe USB DISK 3.0, class 0/0, rev 2.10/1.00, addr 4> on usbus0
- vendor: No such file or directory.
- [root@NASty] ~# umass0: SCSI over Bulk-Only; quirks = 0x8100
- umass0:: Too many arguments.
- quirks: Command not found.
- [root@NASty] ~# umass0:17:0:-1: Attached to scbus17
- umass0:17:0:-1:: Too many arguments.
- [root@NASty] ~# ugen0.5: <No brand> at usbus0
- No: No such file or directory.
- [root@NASty] ~# ukbd0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> on usbus0
- No: No such file or directory.
- [root@NASty] ~# kbd2 at ukbd0
- kbd2: Command not found.
- [root@NASty] ~# ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 5> on usbus0
- No: No such file or directory.
- [root@NASty] ~# ums0: 5 buttons and [XYZ] coordinates ID=1
- ums0:: Too many arguments.
- [root@NASty] ~# ugen0.6: <vendor 0x13fe> at usbus0
- vendor: No such file or directory.
- [root@NASty] ~# umass1: <vendor 0x13fe USB DISK 3.0, class 0/0, rev 2.10/1.00, addr 6> on usbus0
- vendor: No such file or directory.
- [root@NASty] ~# umass1: SCSI over Bulk-Only; quirks = 0x8100
- umass1:: Too many arguments.
- quirks: Command not found.
- [root@NASty] ~# umass1:18:1:-1: Attached to scbus18
- umass1:18:1:-1:: Too many arguments.
- [root@NASty] ~# ugen0.7: <American Megatrends Inc.> at usbus0
- American: No such file or directory.
- [root@NASty] ~# uhub3: <7-port Hub> on usbus0
- 7-port: No such file or directory.
- [root@NASty] ~# uhub3: 5 ports with 5 removable, self powered
- uhub3:: Too many arguments.
- [root@NASty] ~# ugen0.8: <American Megatrends Inc.> at usbus0
- American: No such file or directory.
- [root@NASty] ~# ukbd1: <Keyboard Interface> on usbus0
- Keyboard: No such file or directory.
- [root@NASty] ~# kbd3 at ukbd1
- kbd3: Command not found.
- [root@NASty] ~# ums1: <Mouse Interface> on usbus0
- Mouse: No such file or directory.
- [root@NASty] ~# ums1: 3 buttons and [Z] coordinates ID=0
- ums1:: Too many arguments.
- [root@NASty] ~# ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada0: Command not found.
- [root@NASty] ~# ada0: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9da0 at umass-sim0 bus 0 scbus17 target 0 lun 0
- WDC: No such file or directory.
- [root@NASty] ~# da0: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
- USB: No such file or directory.
- [root@NASty] ~# da0: Serial Number 070D51A98CED3994
- da0:: Too many arguments.
- [root@NASty] ~# da0: 40.000MB/s transfers
- da0:: Too many arguments.
- [root@NASty] ~# da0: 7385MB (15124992 512 byte sectors: 255H 63S/T 941C)
- Badly placed ()'s.
- [root@NASty] ~# da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
- Missing name for redirect.
- [root@NASty] ~# da1 at umass-sim1 bus 1 scbus18 target 0 lun 0
- da1: Command not found.
- [root@NASty] ~# da1: < USB DISK 3.0 PMAP> Removable Direct Access SCSI-6 device
- USB: No such file or directory.
- [root@NASty] ~# da1: Serial Number 070D51A9B1ED3961
- da1:: Too many arguments.
- [root@NASty] ~# da1: 40.000MB/s transfers
- da1:: Too many arguments.
- [root@NASty] ~# da1: 7385MB (15124992 512 byte sectors: 255H 63S/T 941C)
- Badly placed ()'s.
- [root@NASty] ~# da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
- Missing name for redirect.
- [root@NASty] ~# SATA 3.x device
- SATA: Command not found.
- [root@NASty] ~# ada0: Serial Number WD-WMC4N2082018
- ada0:: Too many arguments.
- [root@NASty] ~# ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- Badly placed ()'s.
- [root@NASty] ~# ada0: Command Queueing enabled
- ada0:: Too many arguments.
- [root@NASty] ~# ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- Badly placed ()'s.
- [root@NASty] ~# ada0: quirks=0x1<4K>
- Missing name for redirect.
- [root@NASty] ~# ada0: Previously was known as ad6
- ada0:: Too many arguments.
- [root@NASty] ~# ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
- ada1: Command not found.
- [root@NASty] ~# ada1: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
- WDC: No such file or directory.
- [root@NASty] ~# ada1: Serial Number WD-WMC4N2081689
- ada1:: Too many arguments.
- [root@NASty] ~# ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- Badly placed ()'s.
- [root@NASty] ~# ada1: Command Queueing enabled
- ada1:: Too many arguments.
- [root@NASty] ~# ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- Badly placed ()'s.
- [root@NASty] ~# ada1: quirks=0x1<4K>
- Missing name for redirect.
- [root@NASty] ~# ada1: Previously was known as ad8
- ada1:: Too many arguments.
- [root@NASty] ~# ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
- ada2: Command not found.
- [root@NASty] ~# ada2: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
- WDC: No such file or directory.
- [root@NASty] ~# ada2: Serial Number WD-WMC1T2003884
- ada2:: Too many arguments.
- [root@NASty] ~# ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- Badly placed ()'s.
- [root@NASty] ~# ada2: Command Queueing enabled
- ada2:: Too many arguments.
- [root@NASty] ~# ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- Badly placed ()'s.
- [root@NASty] ~# ada2: quirks=0x1<4K>
- Missing name for redirect.
- [root@NASty] ~# ada2: Previously was known as ad10
- ada2:: Too many arguments.
- [root@NASty] ~# ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
- ada3: Command not found.
- [root@NASty] ~# ada3: <WDC WD30EFRX-68AX9N0 80.00A80> ATA-9 SATA 3.x device
- WDC: No such file or directory.
- [root@NASty] ~# ada3: Serial Number WD-WMC1T2180557
- ada3:: Too many arguments.
- [root@NASty] ~# ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- Badly placed ()'s.
- [root@NASty] ~# ada3: Command Queueing enabled
- ada3:: Too many arguments.
- [root@NASty] ~# ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- Badly placed ()'s.
- [root@NASty] ~# ada3: quirks=0x1<4K>
- Missing name for redirect.
- [root@NASty] ~# ada3: Previously was known as ad12
- ada3:: Too many arguments.
- [root@NASty] ~# ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
- ada4: Command not found.
- [root@NASty] ~# ada4: <WDC WD30EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device
- WDC: No such file or directory.
- [root@NASty] ~# ada4: Serial Number WD-WMC4N1946483
- ada4:: Too many arguments.
- [root@NASty] ~# ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- Badly placed ()'s.
- [root@NASty] ~# ada4: Command Queueing enabled
- ada4:: Too many arguments.
- [root@NASty] ~# ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- Badly placed ()'s.
- [root@NASty] ~# ada4: quirks=0x1<4K>
- Missing name for redirect.
- [root@NASty] ~# ada4: Previously was known as ad14
- ada4:: Too many arguments.
- [root@NASty] ~# pass5 at ahcich9 bus 0 scbus9 target 0 lun 0
- pass5: Command not found.
- [root@NASty] ~# pass5: <Marvell Console 1.01> Removable Processor SCSI-0 device
- Marvell: No such file or directory.
- [root@NASty] ~# pass5: Serial Number HKDP221516WL
- pass5:: Too many arguments.
- [root@NASty] ~# pass5: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
- Badly placed ()'s.
- [root@NASty] ~# SMP: AP CPU #3 Launched!
- SMP:: Too many arguments.
- [root@NASty] ~# SMP: AP CPU #1 Launched!
- SMP:: Too many arguments.
- [root@NASty] ~# SMP: AP CPU #2 Launched!
- SMP:: Too many arguments.
- [root@NASty] ~# Timecounter "TSC-low" frequency 1200071472 Hz quality 1000
- Timecounter: Command not found.
- [root@NASty] ~# Trying to mount root from zfs:freenas-boot/ROOT/default []...
- Trying: Command not found.
- [root@NASty] ~# GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
- Badly placed ()'s.
- [root@NASty] ~# wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff
- wbwd0:: Too many arguments.
- [root@NASty] ~# vboxdrv: fAsync=0 offMin=0x528 offMax=0x1068
- vboxdrv:: Too many arguments.
- [/CODE]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement