Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 3061.229977] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 3061.229985] pci 0000:00:00.0: no hotplug settings from platform
- [ 3061.229987] pci 0000:00:00.0: using default PCI settings
- [ 3061.229992] i915 0000:00:02.0: no hotplug settings from platform
- [ 3061.229994] i915 0000:00:02.0: using default PCI settings
- [ 3061.229999] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
- [ 3061.230003] xhci_hcd 0000:00:14.0: no hotplug settings from platform
- [ 3061.230004] xhci_hcd 0000:00:14.0: using default PCI settings
- [ 3061.230011] mei_me 0000:00:16.0: no hotplug settings from platform
- [ 3061.230013] mei_me 0000:00:16.0: using default PCI settings
- [ 3061.230020] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
- [ 3061.230023] pcieport 0000:00:1c.0: no hotplug settings from platform
- [ 3061.230031] r8169 0000:01:00.0: no hotplug settings from platform
- [ 3061.230034] pcieport 0000:00:1c.3: no hotplug settings from platform
- [ 3061.230042] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 3061.230045] ehci-pci 0000:00:1d.0: no hotplug settings from platform
- [ 3061.230047] ehci-pci 0000:00:1d.0: using default PCI settings
- [ 3061.230055] lpc_ich 0000:00:1f.0: no hotplug settings from platform
- [ 3061.230056] lpc_ich 0000:00:1f.0: using default PCI settings
- [ 3061.230066] ahci 0000:00:1f.2: no hotplug settings from platform
- [ 3061.230067] ahci 0000:00:1f.2: using default PCI settings
- [ 3061.230074] pci 0000:00:1f.3: no hotplug settings from platform
- [ 3061.230075] pci 0000:00:1f.3: using default PCI settings
- [ 3061.231023] pci_bus 0000:01: Allocating resources
- [ 3061.231042] pci_bus 0000:02: Allocating resources
- [ 3061.231060] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 3061.231073] pci 0000:00:00.0: no hotplug settings from platform
- [ 3061.231076] pci 0000:00:00.0: using default PCI settings
- [ 3061.231084] i915 0000:00:02.0: no hotplug settings from platform
- [ 3061.231086] i915 0000:00:02.0: using default PCI settings
- [ 3061.231095] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
- [ 3061.231100] xhci_hcd 0000:00:14.0: no hotplug settings from platform
- [ 3061.231103] xhci_hcd 0000:00:14.0: using default PCI settings
- [ 3061.231112] mei_me 0000:00:16.0: no hotplug settings from platform
- [ 3061.231115] mei_me 0000:00:16.0: using default PCI settings
- [ 3061.231125] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
- [ 3061.231131] pcieport 0000:00:1c.0: no hotplug settings from platform
- [ 3061.231142] r8169 0000:01:00.0: no hotplug settings from platform
- [ 3061.231147] pcieport 0000:00:1c.3: no hotplug settings from platform
- [ 3061.231159] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 3061.231164] ehci-pci 0000:00:1d.0: no hotplug settings from platform
- [ 3061.231167] ehci-pci 0000:00:1d.0: using default PCI settings
- [ 3061.231178] lpc_ich 0000:00:1f.0: no hotplug settings from platform
- [ 3061.231180] lpc_ich 0000:00:1f.0: using default PCI settings
- [ 3061.231192] ahci 0000:00:1f.2: no hotplug settings from platform
- [ 3061.231195] ahci 0000:00:1f.2: using default PCI settings
- [ 3061.231204] pci 0000:00:1f.3: no hotplug settings from platform
- [ 3061.231206] pci 0000:00:1f.3: using default PCI settings
- [ 3061.231594] usb 1-1.7: USB disconnect, device number 14
- [ 3061.228882] Restarting tasks ... done.
- [ 3061.305038] usb 1-1.7: new full-speed USB device number 15 using ehci-pci
- [ 3061.329853] video LNXVIDEO:00: Restoring backlight state
- [ 3061.402390] usb 1-1.7: New USB device found, idVendor=0cf3, idProduct=3004
- [ 3061.402397] usb 1-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3061.572400] usb 1-1.7: USB disconnect, device number 15
- [ 3061.700120] init: anacron main process (4070) killed by TERM signal
- [ 3061.769468] usb 1-1.7: new full-speed USB device number 16 using ehci-pci
- [ 3061.855594] r8169 0000:01:00.0 eth0: link down
- [ 3061.855712] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 3061.862719] usb 1-1.7: New USB device found, idVendor=0cf3, idProduct=3004
- [ 3061.862726] usb 1-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3061.876142] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 3063.503915] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 3063.525309] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 3063.527753] wlan0: authenticated
- [ 3063.531103] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 3063.535475] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=3)
- [ 3063.535528] wlan0: associated
- [ 3063.535556] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 3063.545336] wlan0: deauthenticating from c4:e9:84:31:5a:42 by local choice (reason=2)
- [ 3063.555897] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 3063.571220] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 3063.571303] cfg80211: Calling CRDA to update world regulatory domain
- [ 3063.573557] wlan0: authenticated
- [ 3063.573903] cfg80211: World regulatory domain updated:
- [ 3063.573906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3063.573908] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3063.573910] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3063.573912] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 3063.573914] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3063.573915] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3063.575148] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 3063.579546] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=3)
- [ 3063.579592] wlan0: associated
- [ 3151.681152] mce: [Hardware Error]: Machine check events logged
- [ 3267.908072] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
- [ 3268.151294] wlan0: deauthenticating from c4:e9:84:31:5a:42 by local choice (reason=3)
- [ 3268.164881] cfg80211: Calling CRDA to update world regulatory domain
- [ 3268.170888] cfg80211: World regulatory domain updated:
- [ 3268.170895] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3268.170900] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3268.170904] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3268.170907] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 3268.170911] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3268.170914] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3269.598715] init: anacron main process (11999) killed by TERM signal
- [ 3270.092842] PM: Syncing filesystems ... done.
- [ 3270.293271] PM: Preparing system for mem sleep
- [ 3270.293432] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 3270.295302] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 3270.296639] PM: Entering mem sleep
- [ 3270.296714] Suspending console(s) (use no_console_suspend to debug)
- [ 3270.296926] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 3270.296989] sd 0:0:0:0: [sda] Stopping disk
- [ 3271.399416] PM: suspend of devices complete after 1102.673 msecs
- [ 3271.415421] PM: late suspend of devices complete after 16.002 msecs
- [ 3271.431418] r8169 0000:01:00.0: System wakeup enabled by ACPI
- [ 3271.447860] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 3271.495828] PM: noirq suspend of devices complete after 80.411 msecs
- [ 3271.496175] ACPI: Preparing to enter system sleep state S3
- [ 3271.498003] PM: Saving platform NVS memory
- [ 3271.498788] Disabling non-boot CPUs ...
- [ 3271.500040] kvm: disabling virtualization on CPU1
- [ 3271.500057] smpboot: CPU 1 is now offline
- [ 3271.501558] kvm: disabling virtualization on CPU2
- [ 3271.501563] smpboot: CPU 2 is now offline
- [ 3271.503098] kvm: disabling virtualization on CPU3
- [ 3271.603332] smpboot: CPU 3 is now offline
- [ 3271.606158] ACPI: Low-level resume complete
- [ 3271.606243] PM: Restoring platform NVS memory
- [ 3271.606963] Enabling non-boot CPUs ...
- [ 3271.607026] x86: Booting SMP configuration:
- [ 3271.607029] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 3271.619719] kvm: enabling virtualization on CPU1
- [ 3271.622221] CPU1 is up
- [ 3271.622245] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 3271.634586] kvm: enabling virtualization on CPU2
- [ 3271.637010] CPU2 is up
- [ 3271.637029] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 3271.649215] kvm: enabling virtualization on CPU3
- [ 3271.651622] CPU3 is up
- [ 3271.656328] ACPI: Waking up from system sleep state S3
- [ 3271.750559] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 3271.798641] PM: noirq resume of devices complete after 140.655 msecs
- [ 3271.798794] PM: early resume of devices complete after 0.126 msecs
- [ 3271.798971] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
- [ 3271.799045] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
- [ 3271.799077] r8169 0000:01:00.0: System wakeup disabled by ACPI
- [ 3271.799146] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
- [ 3271.799303] ath: phy0: ASPM enabled: 0x43
- [ 3271.804585] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
- [ 3271.804587] PM: Device 00:06 failed to resume: error -19
- [ 3272.030509] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
- [ 3272.122473] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3272.124989] ata2.00: configured for UDMA/100
- [ 3272.194493] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
- [ 3272.358474] usb 1-1.7: reset full-speed USB device number 16 using ehci-pci
- [ 3272.450769] usb 1-1.7: device firmware changed
- [ 3272.639680] psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4794]
- [ 3272.684384] psmouse serio1: synaptics: queried min coordinates: x [1314..], y [1098..]
- [ 3273.666880] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 3273.970416] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3273.984988] ata1.00: configured for UDMA/100
- [ 3273.998406] sd 0:0:0:0: [sda] Starting disk
- [ 3274.007930] PM: resume of devices complete after 2209.312 msecs
- [ 3274.008182] PM: Finishing wakeup.
- [ 3274.008989] r8169 0000:01:00.0: no hotplug settings from platform
- [ 3274.009055] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 3274.010116] pci_bus 0000:01: Allocating resources
- [ 3274.010133] pci_bus 0000:02: Allocating resources
- [ 3274.010151] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 3274.010159] pci 0000:00:00.0: no hotplug settings from platform
- [ 3274.010161] pci 0000:00:00.0: using default PCI settings
- [ 3274.010167] i915 0000:00:02.0: no hotplug settings from platform
- [ 3274.010168] i915 0000:00:02.0: using default PCI settings
- [ 3274.010174] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
- [ 3274.010177] xhci_hcd 0000:00:14.0: no hotplug settings from platform
- [ 3274.010179] xhci_hcd 0000:00:14.0: using default PCI settings
- [ 3274.010186] mei_me 0000:00:16.0: no hotplug settings from platform
- [ 3274.010187] mei_me 0000:00:16.0: using default PCI settings
- [ 3274.010194] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
- [ 3274.010198] pcieport 0000:00:1c.0: no hotplug settings from platform
- [ 3274.010205] r8169 0000:01:00.0: no hotplug settings from platform
- [ 3274.010208] pcieport 0000:00:1c.3: no hotplug settings from platform
- [ 3274.010219] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 3274.010222] ehci-pci 0000:00:1d.0: no hotplug settings from platform
- [ 3274.010224] ehci-pci 0000:00:1d.0: using default PCI settings
- [ 3274.010231] lpc_ich 0000:00:1f.0: no hotplug settings from platform
- [ 3274.010233] lpc_ich 0000:00:1f.0: using default PCI settings
- [ 3274.010242] ahci 0000:00:1f.2: no hotplug settings from platform
- [ 3274.010244] ahci 0000:00:1f.2: using default PCI settings
- [ 3274.010250] pci 0000:00:1f.3: no hotplug settings from platform
- [ 3274.010252] pci 0000:00:1f.3: using default PCI settings
- [ 3274.011091] pci_bus 0000:01: Allocating resources
- [ 3274.011107] pci_bus 0000:02: Allocating resources
- [ 3274.011122] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 3274.011130] pci 0000:00:00.0: no hotplug settings from platform
- [ 3274.011132] pci 0000:00:00.0: using default PCI settings
- [ 3274.011137] i915 0000:00:02.0: no hotplug settings from platform
- [ 3274.011139] i915 0000:00:02.0: using default PCI settings
- [ 3274.011144] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
- [ 3274.011147] xhci_hcd 0000:00:14.0: no hotplug settings from platform
- [ 3274.011149] xhci_hcd 0000:00:14.0: using default PCI settings
- [ 3274.011156] mei_me 0000:00:16.0: no hotplug settings from platform
- [ 3274.011158] mei_me 0000:00:16.0: using default PCI settings
- [ 3274.011165] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
- [ 3274.011168] pcieport 0000:00:1c.0: no hotplug settings from platform
- [ 3274.011175] r8169 0000:01:00.0: no hotplug settings from platform
- [ 3274.011178] pcieport 0000:00:1c.3: no hotplug settings from platform
- [ 3274.011189] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 3274.011192] ehci-pci 0000:00:1d.0: no hotplug settings from platform
- [ 3274.011194] ehci-pci 0000:00:1d.0: using default PCI settings
- [ 3274.011201] lpc_ich 0000:00:1f.0: no hotplug settings from platform
- [ 3274.011203] lpc_ich 0000:00:1f.0: using default PCI settings
- [ 3274.011212] ahci 0000:00:1f.2: no hotplug settings from platform
- [ 3274.011214] ahci 0000:00:1f.2: using default PCI settings
- [ 3274.011220] pci 0000:00:1f.3: no hotplug settings from platform
- [ 3274.011222] pci 0000:00:1f.3: using default PCI settings
- [ 3274.008183] Restarting tasks ... done.
- [ 3274.015284] usb 1-1.7: USB disconnect, device number 16
- [ 3274.086347] usb 1-1.7: new full-speed USB device number 17 using ehci-pci
- [ 3274.099288] video LNXVIDEO:00: Restoring backlight state
- [ 3274.179504] usb 1-1.7: New USB device found, idVendor=0cf3, idProduct=3004
- [ 3274.179509] usb 1-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3274.361709] usb 1-1.7: USB disconnect, device number 17
- [ 3274.558362] usb 1-1.7: new full-speed USB device number 18 using ehci-pci
- [ 3274.635409] init: anacron main process (12204) killed by TERM signal
- [ 3274.792330] r8169 0000:01:00.0 eth0: link down
- [ 3274.792421] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 3274.826817] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 3275.737056] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 3275.752325] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 3275.754688] wlan0: authenticated
- [ 3275.758201] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 3275.764609] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=3)
- [ 3275.764656] wlan0: associated
- [ 3275.764664] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 3279.651495] usb 1-1.7: New USB device found, idVendor=0cf3, idProduct=3004
- [ 3279.651504] usb 1-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3281.229858] cfg80211: Calling CRDA to update world regulatory domain
- [ 3281.239045] cfg80211: World regulatory domain updated:
- [ 3281.239054] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 3281.239059] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3281.239063] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3281.239066] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 3281.239069] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3281.239072] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 3282.174557] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 3282.195617] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 3282.199909] wlan0: authenticated
- [ 3282.201722] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 3282.206142] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=3)
- [ 3282.206193] wlan0: associated
- [ 3376.758073] mce: [Hardware Error]: Machine check events logged
- [ 5076.213549] wlan0: deauthenticating from c4:e9:84:31:5a:42 by local choice (reason=3)
- [ 5076.228371] cfg80211: Calling CRDA to update world regulatory domain
- [ 5076.235876] cfg80211: World regulatory domain updated:
- [ 5076.235883] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 5076.235887] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5076.235890] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5076.235893] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 5076.235895] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5076.235898] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5077.685324] init: anacron main process (17021) killed by TERM signal
- [ 5078.412840] PM: Syncing filesystems ... done.
- [ 5078.766323] PM: Preparing system for mem sleep
- [ 5078.766483] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 5078.768322] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 5078.769595] PM: Entering mem sleep
- [ 5078.769670] Suspending console(s) (use no_console_suspend to debug)
- [ 5078.769916] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 5078.769957] sd 0:0:0:0: [sda] Stopping disk
- [ 5079.814219] PM: suspend of devices complete after 1043.976 msecs
- [ 5079.830226] PM: late suspend of devices complete after 15.996 msecs
- [ 5079.846242] r8169 0000:01:00.0: System wakeup enabled by ACPI
- [ 5079.862695] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
- [ 5079.910693] PM: noirq suspend of devices complete after 80.431 msecs
- [ 5079.911040] ACPI: Preparing to enter system sleep state S3
- [ 5079.912841] PM: Saving platform NVS memory
- [ 5079.913618] Disabling non-boot CPUs ...
- [ 5079.914850] kvm: disabling virtualization on CPU1
- [ 5079.915223] smpboot: CPU 1 is now offline
- [ 5079.916722] kvm: disabling virtualization on CPU2
- [ 5080.018241] smpboot: CPU 2 is now offline
- [ 5080.019658] kvm: disabling virtualization on CPU3
- [ 5080.122281] smpboot: CPU 3 is now offline
- [ 5080.125146] ACPI: Low-level resume complete
- [ 5080.125230] PM: Restoring platform NVS memory
- [ 5080.125963] Enabling non-boot CPUs ...
- [ 5080.126027] x86: Booting SMP configuration:
- [ 5080.126029] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 5080.138822] kvm: enabling virtualization on CPU1
- [ 5080.141354] CPU1 is up
- [ 5080.141379] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 5080.153719] kvm: enabling virtualization on CPU2
- [ 5080.156068] CPU2 is up
- [ 5080.156090] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 5080.168278] kvm: enabling virtualization on CPU3
- [ 5080.170646] CPU3 is up
- [ 5080.175349] ACPI: Waking up from system sleep state S3
- [ 5080.269657] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 5080.317762] PM: noirq resume of devices complete after 140.675 msecs
- [ 5080.317915] PM: early resume of devices complete after 0.126 msecs
- [ 5080.318089] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
- [ 5080.320663] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
- [ 5080.321431] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
- [ 5080.321669] ath: phy0: ASPM enabled: 0x43
- [ 5080.321689] r8169 0000:01:00.0: System wakeup disabled by ACPI
- [ 5080.326001] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
- [ 5080.326002] PM: Device 00:06 failed to resume: error -19
- [ 5080.553757] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
- [ 5080.657807] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 5080.660311] ata2.00: configured for UDMA/100
- [ 5080.717832] usb 1-1.7: reset full-speed USB device number 18 using ehci-pci
- [ 5080.810129] usb 1-1.7: device firmware changed
- [ 5080.881863] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
- [ 5081.163830] psmouse serio1: synaptics: queried max coordinates: x [..5670], y [..4794]
- [ 5081.212449] psmouse serio1: synaptics: queried min coordinates: x [1314..], y [1098..]
- [ 5081.878299] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
- [ 5082.450586] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5082.463619] ata1.00: configured for UDMA/100
- [ 5082.478622] sd 0:0:0:0: [sda] Starting disk
- [ 5082.506756] PM: resume of devices complete after 2187.922 msecs
- [ 5082.506977] PM: Finishing wakeup.
- [ 5082.507018] r8169 0000:01:00.0: no hotplug settings from platform
- [ 5082.507056] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 5082.508021] pci_bus 0000:01: Allocating resources
- [ 5082.508037] pci_bus 0000:02: Allocating resources
- [ 5082.508059] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 5082.508067] pci 0000:00:00.0: no hotplug settings from platform
- [ 5082.508068] pci 0000:00:00.0: using default PCI settings
- [ 5082.508074] i915 0000:00:02.0: no hotplug settings from platform
- [ 5082.508076] i915 0000:00:02.0: using default PCI settings
- [ 5082.508081] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
- [ 5082.508085] xhci_hcd 0000:00:14.0: no hotplug settings from platform
- [ 5082.508086] xhci_hcd 0000:00:14.0: using default PCI settings
- [ 5082.508093] mei_me 0000:00:16.0: no hotplug settings from platform
- [ 5082.508095] mei_me 0000:00:16.0: using default PCI settings
- [ 5082.508102] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
- [ 5082.508105] pcieport 0000:00:1c.0: no hotplug settings from platform
- [ 5082.508113] r8169 0000:01:00.0: no hotplug settings from platform
- [ 5082.508116] pcieport 0000:00:1c.3: no hotplug settings from platform
- [ 5082.508124] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 5082.508128] ehci-pci 0000:00:1d.0: no hotplug settings from platform
- [ 5082.508129] ehci-pci 0000:00:1d.0: using default PCI settings
- [ 5082.508137] lpc_ich 0000:00:1f.0: no hotplug settings from platform
- [ 5082.508139] lpc_ich 0000:00:1f.0: using default PCI settings
- [ 5082.508148] ahci 0000:00:1f.2: no hotplug settings from platform
- [ 5082.508149] ahci 0000:00:1f.2: using default PCI settings
- [ 5082.508156] pci 0000:00:1f.3: no hotplug settings from platform
- [ 5082.508158] pci 0000:00:1f.3: using default PCI settings
- [ 5082.508832] pci_bus 0000:01: Allocating resources
- [ 5082.508846] pci_bus 0000:02: Allocating resources
- [ 5082.508859] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
- [ 5082.508866] pci 0000:00:00.0: no hotplug settings from platform
- [ 5082.508867] pci 0000:00:00.0: using default PCI settings
- [ 5082.508872] i915 0000:00:02.0: no hotplug settings from platform
- [ 5082.508874] i915 0000:00:02.0: using default PCI settings
- [ 5082.508879] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
- [ 5082.508882] xhci_hcd 0000:00:14.0: no hotplug settings from platform
- [ 5082.508884] xhci_hcd 0000:00:14.0: using default PCI settings
- [ 5082.508891] mei_me 0000:00:16.0: no hotplug settings from platform
- [ 5082.508892] mei_me 0000:00:16.0: using default PCI settings
- [ 5082.508900] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
- [ 5082.508903] pcieport 0000:00:1c.0: no hotplug settings from platform
- [ 5082.508910] r8169 0000:01:00.0: no hotplug settings from platform
- [ 5082.508913] pcieport 0000:00:1c.3: no hotplug settings from platform
- [ 5082.508921] ath9k 0000:02:00.0: no hotplug settings from platform
- [ 5082.508924] ehci-pci 0000:00:1d.0: no hotplug settings from platform
- [ 5082.508926] ehci-pci 0000:00:1d.0: using default PCI settings
- [ 5082.508934] lpc_ich 0000:00:1f.0: no hotplug settings from platform
- [ 5082.508935] lpc_ich 0000:00:1f.0: using default PCI settings
- [ 5082.508944] ahci 0000:00:1f.2: no hotplug settings from platform
- [ 5082.508946] ahci 0000:00:1f.2: using default PCI settings
- [ 5082.508952] pci 0000:00:1f.3: no hotplug settings from platform
- [ 5082.508954] pci 0000:00:1f.3: using default PCI settings
- [ 5082.508989] usb 1-1.7: USB disconnect, device number 18
- [ 5082.506978] Restarting tasks ... done.
- [ 5082.582585] usb 1-1.7: new full-speed USB device number 19 using ehci-pci
- [ 5082.607378] video LNXVIDEO:00: Restoring backlight state
- [ 5082.682266] usb 1-1.7: New USB device found, idVendor=0cf3, idProduct=3004
- [ 5082.682273] usb 1-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 5082.757505] init: anacron main process (17286) killed by TERM signal
- [ 5082.884964] usb 1-1.7: USB disconnect, device number 19
- [ 5082.904789] r8169 0000:01:00.0 eth0: link down
- [ 5082.904849] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 5082.942183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 5083.090817] usb 1-1.7: new full-speed USB device number 20 using ehci-pci
- [ 5083.800986] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 5083.816249] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 5083.818598] wlan0: authenticated
- [ 5083.819116] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 5083.823475] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=3)
- [ 5083.823526] wlan0: associated
- [ 5083.823553] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 5088.186413] usb 1-1.7: New USB device found, idVendor=0cf3, idProduct=3004
- [ 5088.186422] usb 1-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 5089.718817] cfg80211: Calling CRDA to update world regulatory domain
- [ 5089.725834] cfg80211: World regulatory domain updated:
- [ 5089.725840] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 5089.725844] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5089.725847] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5089.725850] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 5089.725853] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5089.725855] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5090.606993] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 5090.627750] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 5090.630209] wlan0: authenticated
- [ 5090.633946] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 5090.638335] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=3)
- [ 5090.638388] wlan0: associated
- [ 5102.900009] mce: [Hardware Error]: Machine check events logged
- [ 5346.106442] cfg80211: Calling CRDA to update world regulatory domain
- [ 5346.114587] cfg80211: World regulatory domain updated:
- [ 5346.114595] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 5346.114599] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5346.114603] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5346.114606] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 5346.114609] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5346.114613] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 5361.543434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 6023.393789] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 6023.409096] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 6023.411449] wlan0: authenticated
- [ 6023.414052] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 6023.418413] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=2)
- [ 6023.418457] wlan0: associated
- [ 6023.418482] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 6218.420506] cfg80211: Calling CRDA to update world regulatory domain
- [ 6218.427033] cfg80211: World regulatory domain updated:
- [ 6218.427039] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 6218.427044] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 6218.427048] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 6218.427052] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 6218.427056] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 6218.427059] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 6219.350653] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 6219.371648] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 6219.476817] wlan0: send auth to c4:e9:84:31:5a:42 (try 2/3)
- [ 6219.585919] wlan0: send auth to c4:e9:84:31:5a:42 (try 3/3)
- [ 6219.695757] wlan0: authentication with c4:e9:84:31:5a:42 timed out
- [ 6233.989380] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 6239.453888] wlan0: authenticate with c4:e9:84:31:5a:42
- [ 6239.469128] wlan0: send auth to c4:e9:84:31:5a:42 (try 1/3)
- [ 6239.471425] wlan0: authenticated
- [ 6239.474140] wlan0: associate with c4:e9:84:31:5a:42 (try 1/3)
- [ 6239.478501] wlan0: RX AssocResp from c4:e9:84:31:5a:42 (capab=0x431 status=0 aid=1)
- [ 6239.478544] wlan0: associated
- [ 6239.478569] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 6273.423160] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
- zbynek@zbynek-pc:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement