Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.655842] AppArmor: AppArmor sha1 policy hashing enabled
- [ 0.655844] IMA: No TPM chip found, activating TPM-bypass!
- [ 0.656108] regulator-dummy: disabling
- [ 0.656138] Magic number: 14:785:120
- [ 0.656142] misc device-mapper: hash matches
- [ 0.656218] rtc_cmos 00:02: setting system clock to 2014-09-10 09:06:48 UTC (1410340008)
- [ 0.656396] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.656398] EDD information not available.
- [ 0.656417] PM: Hibernation image not present or could not be loaded.
- [ 0.942573] ata3: SATA link down (SStatus 0 SControl 300)
- [ 0.942575] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 1.072335] usb 1-1: New USB device found, idVendor=2001, idProduct=f103
- [ 1.072337] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.072475] hub 1-1:1.0: USB hub found
- [ 1.072583] hub 1-1:1.0: 7 ports detected
- [ 1.088040] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.096230] ata4.00: ATA-6: ST3120827AS, 3.42, max UDMA/133
- [ 1.096232] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.112271] ata4.00: configured for UDMA/133
- [ 1.408054] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.408064] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.408166] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.408176] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.440419] ata2.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
- [ 1.440421] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.444017] usb 1-3: new high-speed USB device number 4 using ehci-pci
- [ 1.452908] ata1.00: ATA-8: WDC WD6400AAKS-00A7B0, 01.03B01, max UDMA/133
- [ 1.452909] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.453029] ata1.01: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
- [ 1.453031] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.468401] ata1.00: configured for UDMA/133
- [ 1.476216] ata1.01: configured for UDMA/133
- [ 1.476298] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
- [ 1.476387] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.476388] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
- [ 1.476445] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.476448] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.476473] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.476508] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
- [ 1.476598] sd 0:0:1:0: Attached scsi generic sg1 type 0
- [ 1.476618] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.476657] sd 0:0:1:0: [sdb] Write Protect is off
- [ 1.476659] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.480807] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.486444] ata2.01: ATA-7: ST3320620NS, 3.AEE, max UDMA/133
- [ 1.486446] ata2.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.500364] ata2.00: configured for UDMA/133
- [ 1.507708] sda: sda1 sda2 < sda5 sda6 >
- [ 1.513197] sdb: sdb1
- [ 1.513265] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.513347] sd 0:0:1:0: [sdb] Attached SCSI disk
- [ 1.520011] tsc: Refined TSC clocksource calibration: 3599.999 MHz
- [ 1.561408] ata2.01: configured for UDMA/133
- [ 1.561468] scsi 1:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
- [ 1.561535] sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 1.561557] sd 1:0:0:0: Attached scsi generic sg2 type 0
- [ 1.561577] sd 1:0:0:0: [sdc] Write Protect is off
- [ 1.561579] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.561597] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.561629] scsi 1:0:1:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5
- [ 1.561701] sd 1:0:1:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.561736] sd 1:0:1:0: Attached scsi generic sg3 type 0
- [ 1.561752] sd 1:0:1:0: [sdd] Write Protect is off
- [ 1.561754] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
- [ 1.561783] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.561947] scsi 3:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5
- [ 1.562015] sd 3:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- [ 1.562029] sd 3:0:0:0: Attached scsi generic sg4 type 0
- [ 1.562060] sd 3:0:0:0: [sde] Write Protect is off
- [ 1.562062] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
- [ 1.562086] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.575667] sdc: sdc1
- [ 1.578458] usb 1-3: New USB device found, idVendor=1415, idProduct=2000
- [ 1.578461] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.578462] usb 1-3: Product: USB Camera-B4.09.24.1
- [ 1.578464] usb 1-3: Manufacturer: OmniVision Technologies, Inc.
- [ 1.601099] sdd: sdd1
- [ 1.601152] sd 1:0:0:0: [sdc] Attached SCSI disk
- [ 1.601251] sd 1:0:1:0: [sdd] Attached SCSI disk
- [ 1.609707] sde: sde1 sde2 sde3 < sde5 >
- [ 1.609943] sd 3:0:0:0: [sde] Attached SCSI disk
- [ 1.611120] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
- [ 1.611122] Write protecting the kernel read-only data: 12288k
- [ 1.613085] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
- [ 1.614633] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
- [ 1.625827] systemd-udevd[116]: starting version 204
- [ 1.647063] ahci 0000:03:00.0: version 3.0
- [ 1.655825] [drm] Initialized drm 1.1.0 20060810
- [ 1.660046] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
- [ 1.660049] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 1.661877] scsi4 : ahci
- [ 1.663392] scsi5 : ahci
- [ 1.663432] ata5: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 16
- [ 1.663435] ata6: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 16
- [ 1.665280] scsi6 : pata_jmicron
- [ 1.668039] scsi7 : pata_jmicron
- [ 1.668077] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
- [ 1.668079] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
- [ 1.690405] [drm] radeon kernel modesetting enabled.
- [ 1.690579] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
- [ 1.690581] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
- [ 1.690594] Console: switching to colour dummy device 80x25
- [ 1.691130] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0xE147).
- [ 1.691145] [drm] register mmio base: 0xFDAC0000
- [ 1.691146] [drm] register mmio size: 131072
- [ 1.691364] ATOM BIOS: JUNIPER
- [ 1.691400] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- [ 1.691402] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
- [ 1.691404] [drm] Detected VRAM RAM=1024M, BAR=256M
- [ 1.691405] [drm] RAM width 128bits DDR
- [ 1.691452] [TTM] Zone kernel: Available graphics memory: 2023494 kiB
- [ 1.691454] [TTM] Initializing pool allocator
- [ 1.691457] [TTM] Initializing DMA pool allocator
- [ 1.691469] [drm] radeon: 1024M of VRAM memory ready
- [ 1.691471] [drm] radeon: 1024M of GTT memory ready.
- [ 1.691485] [drm] Loading JUNIPER Microcode
- [ 1.692014] [drm] GART: num cpu pages 262144, num gpu pages 262144
- [ 1.712498] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
- [ 1.712890] radeon 0000:01:00.0: WB enabled
- [ 1.712893] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880123cb5c00
- [ 1.712895] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880123cb5c0c
- [ 1.713662] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001141c418
- [ 1.713776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.713778] [drm] Driver supports precise vblank timestamp query.
- [ 1.713816] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 1.713827] radeon 0000:01:00.0: radeon: using MSI.
- [ 1.713848] [drm] radeon: irq initialized.
- [ 1.721633] firewire_ohci 0000:06:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
- [ 1.730419] [drm] ring test on 0 succeeded in 1 usecs
- [ 1.730475] [drm] ring test on 3 succeeded in 1 usecs
- [ 1.832685] usb 3-2: new full-speed USB device number 2 using uhci_hcd
- [ 1.833220] ata7.00: ATAPI: ASUS DRW-1814BL, 1.14, max UDMA/66
- [ 1.833223] ata7.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
- [ 1.837557] random: nonblocking pool is initialized
- [ 1.840723] ata7.00: configured for UDMA/66
- [ 1.856527] ata7.01: configured for UDMA/33
- [ 1.938099] [drm] ring test on 5 succeeded in 1 usecs
- [ 1.938103] [drm] UVD initialized successfully.
- [ 1.938378] [drm] Enabling audio 0 support
- [ 1.938399] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 1.938417] [drm] ib test on ring 3 succeeded in 0 usecs
- [ 1.980032] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.980068] ata6: SATA link down (SStatus 0 SControl 300)
- [ 2.007374] usb 3-2: New USB device found, idVendor=046d, idProduct=c223
- [ 2.007377] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.007379] usb 3-2: Product: Logitech G15 Keyboard
- [ 2.007381] usb 3-2: Manufacturer: Logitech
- [ 2.007979] scsi 6:0:0:0: CD-ROM ASUS DRW-1814BL 1.14 PQ: 0 ANSI: 5
- [ 2.010337] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.010339] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.010390] hub 3-2:1.0: USB hub found
- [ 2.010432] sr 6:0:0:0: Attached scsi CD-ROM sr0
- [ 2.010471] sr 6:0:0:0: Attached scsi generic sg5 type 5
- [ 2.012383] hub 3-2:1.0: 4 ports detected
- [ 2.108355] [drm] ib test on ring 5 succeeded
- [ 2.108795] [drm] Radeon Display Connectors
- [ 2.108797] [drm] Connector 0:
- [ 2.108798] [drm] DP-1
- [ 2.108799] [drm] HPD4
- [ 2.108801] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
- [ 2.108801] [drm] Encoders:
- [ 2.108803] [drm] DFP1: INTERNAL_UNIPHY2
- [ 2.108804] [drm] Connector 1:
- [ 2.108805] [drm] HDMI-A-1
- [ 2.108805] [drm] HPD5
- [ 2.108807] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
- [ 2.108808] [drm] Encoders:
- [ 2.108809] [drm] DFP2: INTERNAL_UNIPHY2
- [ 2.108810] [drm] Connector 2:
- [ 2.108811] [drm] DVI-I-1
- [ 2.108812] [drm] HPD1
- [ 2.108813] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
- [ 2.108814] [drm] Encoders:
- [ 2.108815] [drm] DFP3: INTERNAL_UNIPHY1
- [ 2.108816] [drm] CRT2: INTERNAL_KLDSCP_DAC2
- [ 2.108817] [drm] Connector 3:
- [ 2.108818] [drm] DVI-I-2
- [ 2.108819] [drm] HPD6
- [ 2.108820] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
- [ 2.108821] [drm] Encoders:
- [ 2.108822] [drm] DFP4: INTERNAL_UNIPHY
- [ 2.108823] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 2.108855] [drm] Internal thermal controller with fan control
- [ 2.110096] scsi 6:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
- [ 2.113844] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
- [ 2.113963] sr 6:0:1:0: Attached scsi CD-ROM sr1
- [ 2.114003] sr 6:0:1:0: Attached scsi generic sg6 type 5
- [ 2.118249] [drm] radeon: dpm initialized
- [ 2.128019] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 2.211655] [drm] fb mappable at 0xD045E000
- [ 2.211657] [drm] vram apper at 0xD0000000
- [ 2.211658] [drm] size 7299072
- [ 2.211659] [drm] fb depth is 24
- [ 2.211660] [drm] pitch is 6912
- [ 2.211715] fbcon: radeondrmfb (fb0) is primary device
- [ 2.220056] firewire_core 0000:06:02.0: created device fw0: GUID 00508d0000b1f7e4, S400
- [ 2.221301] Console: switching to colour frame buffer device 210x65
- [ 2.224693] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
- [ 2.224694] radeon 0000:01:00.0: registered panic notifier
- [ 2.224698] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
- [ 2.266663] usb 2-1: New USB device found, idVendor=4146, idProduct=ba63
- [ 2.266666] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.266668] usb 2-1: Product: USB Mass Storage Device
- [ 2.266669] usb 2-1: Manufacturer: PRETEC Technology
- [ 2.266671] usb 2-1: SerialNumber: 5744ca04a5659e
- [ 2.280555] usb-storage 2-1:1.0: USB Mass Storage device detected
- [ 2.280604] scsi8 : usb-storage 2-1:1.0
- [ 2.280650] usbcore: registered new interface driver usb-storage
- [ 2.376025] usb 2-3: new high-speed USB device number 3 using ehci-pci
- [ 2.509916] usb 2-3: New USB device found, idVendor=058f, idProduct=6362
- [ 2.509919] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.509921] usb 2-3: Product: Mass Storage Device
- [ 2.509922] usb 2-3: Manufacturer: Generic
- [ 2.509924] usb 2-3: SerialNumber: 058F312D81B1
- [ 2.510189] usb-storage 2-3:1.0: USB Mass Storage device detected
- [ 2.512014] scsi9 : usb-storage 2-3:1.0
- [ 2.536799] Switched to clocksource tsc
- [ 2.712084] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
- [ 2.804333] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2504
- [ 2.804336] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.804491] hub 1-1.1:1.0: USB hub found
- [ 2.804581] hub 1-1.1:1.0: 2 ports detected
- [ 2.876082] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
- [ 2.955111] EXT4-fs (sde5): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.969208] usb 1-1.6: New USB device found, idVendor=05e3, idProduct=0608
- [ 2.969211] usb 1-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.969213] usb 1-1.6: Product: USB2.0 Hub
- [ 2.969474] hub 1-1.6:1.0: USB hub found
- [ 2.969705] hub 1-1.6:1.0: 4 ports detected
- [ 3.045369] usb 3-2.1: new low-speed USB device number 3 using uhci_hcd
- [ 3.179375] usb 3-2.1: New USB device found, idVendor=046d, idProduct=c221
- [ 3.179378] usb 3-2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 3.179380] usb 3-2.1: Product: Gaming Keyboard
- [ 3.280924] scsi 8:0:0:0: Direct-Access -Pretec 04GB 2.10 PQ: 0 ANSI: 2
- [ 3.281049] sd 8:0:0:0: Attached scsi generic sg7 type 0
- [ 3.282043] sd 8:0:0:0: [sdf] 7897087 512-byte logical blocks: (4.04 GB/3.76 GiB)
- [ 3.283041] sd 8:0:0:0: [sdf] Write Protect is off
- [ 3.283043] sd 8:0:0:0: [sdf] Mode Sense: 00 00 00 00
- [ 3.284041] sd 8:0:0:0: [sdf] Asking for cache data failed
- [ 3.284042] sd 8:0:0:0: [sdf] Assuming drive cache: write through
- [ 3.288415] sd 8:0:0:0: [sdf] Asking for cache data failed
- [ 3.288418] sd 8:0:0:0: [sdf] Assuming drive cache: write through
- [ 3.351428] sdf: sdf1
- [ 3.354914] sd 8:0:0:0: [sdf] Asking for cache data failed
- [ 3.354917] sd 8:0:0:0: [sdf] Assuming drive cache: write through
- [ 3.354918] sd 8:0:0:0: [sdf] Attached SCSI removable disk
- [ 3.385372] usb 3-2.3: new low-speed USB device number 4 using uhci_hcd
- [ 3.502372] usb 3-2.3: New USB device found, idVendor=04b4, idProduct=0033
- [ 3.502374] usb 3-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.512670] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
- [ 3.513171] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
- [ 3.513795] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
- [ 3.514294] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
- [ 3.514410] sd 9:0:0:0: Attached scsi generic sg8 type 0
- [ 3.514497] sd 9:0:0:1: Attached scsi generic sg9 type 0
- [ 3.514589] sd 9:0:0:2: Attached scsi generic sg10 type 0
- [ 3.514678] sd 9:0:0:3: Attached scsi generic sg11 type 0
- [ 3.520041] sd 9:0:0:0: [sdg] Attached SCSI removable disk
- [ 3.520665] sd 9:0:0:1: [sdh] Attached SCSI removable disk
- [ 3.521289] sd 9:0:0:2: [sdi] Attached SCSI removable disk
- [ 3.521914] sd 9:0:0:3: [sdj] Attached SCSI removable disk
- [ 3.581373] usb 3-2.4: new full-speed USB device number 5 using uhci_hcd
- [ 3.725370] usb 3-2.4: New USB device found, idVendor=046d, idProduct=c222
- [ 3.725372] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.725374] usb 3-2.4: Product: G15 Keyboard
- [ 3.725375] usb 3-2.4: Manufacturer: G15 Keyboard
- [ 3.928084] usb 1-1.5: new full-speed USB device number 7 using ehci-pci
- [ 4.021956] usb 1-1.5: New USB device found, idVendor=0a5c, idProduct=4500
- [ 4.021959] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.021961] usb 1-1.5: Product: BCM2046B1
- [ 4.021962] usb 1-1.5: Manufacturer: Broadcom
- [ 4.022099] hub 1-1.5:1.0: USB hub found
- [ 4.022331] hub 1-1.5:1.0: 3 ports detected
- [ 4.292085] usb 1-1.5.1: new full-speed USB device number 8 using ehci-pci
- [ 4.502833] usb 1-1.5.1: New USB device found, idVendor=0a5c, idProduct=4502
- [ 4.502836] usb 1-1.5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.572084] usb 1-1.5.2: new full-speed USB device number 9 using ehci-pci
- [ 4.667211] usb 1-1.5.2: New USB device found, idVendor=0a5c, idProduct=4503
- [ 4.667214] usb 1-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.736085] usb 1-1.5.3: new full-speed USB device number 10 using ehci-pci
- [ 4.831959] usb 1-1.5.3: New USB device found, idVendor=0a5c, idProduct=2148
- [ 4.831962] usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.831964] usb 1-1.5.3: Product: BCM92046DG-CL1ROM
- [ 4.831966] usb 1-1.5.3: Manufacturer: Broadcom Corp
- [ 4.831967] usb 1-1.5.3: SerialNumber: 000272A2962E
- [ 16.358097] Adding 2047996k swap on /dev/sde1. Priority:-1 extents:1 across:2047996k FS
- [ 16.474220] systemd-udevd[388]: starting version 204
- [ 16.565878] lp: driver loaded but no devices found
- [ 16.571381] ppdev: user-space parallel port driver
- [ 16.643951] Bluetooth: Core ver 2.17
- [ 16.643968] NET: Registered protocol family 31
- [ 16.643969] Bluetooth: HCI device and connection manager initialized
- [ 16.643977] Bluetooth: HCI socket layer initialized
- [ 16.643979] Bluetooth: L2CAP socket layer initialized
- [ 16.643983] Bluetooth: SCO socket layer initialized
- [ 16.653594] usbcore: registered new interface driver btusb
- [ 16.675381] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 16.698581] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
- [ 16.711310] SKU: Nid=0x1d sku_cfg=0x4014a601
- [ 16.711313] SKU: port_connectivity=0x1
- [ 16.711314] SKU: enable_pcbeep=0x1
- [ 16.711315] SKU: check_sum=0x00000004
- [ 16.711316] SKU: customization=0x000000a6
- [ 16.711317] SKU: external_amp=0x0
- [ 16.711318] SKU: platform_type=0x0
- [ 16.711319] SKU: swap=0x0
- [ 16.711320] SKU: override=0x1
- [ 16.711805] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
- [ 16.711807] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 16.711808] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
- [ 16.711809] mono: mono_out=0x0
- [ 16.711810] dig-out=0x1e/0x0
- [ 16.711811] inputs:
- [ 16.711812] Front Mic=0x19
- [ 16.711814] Rear Mic=0x18
- [ 16.711815] Line=0x1a
- [ 16.711816] dig-in=0x1f
- [ 16.711817] realtek: No valid SSID, checking pincfg 0x4014a601 for NID 0x1d
- [ 16.711818] realtek: Enabling init ASM_ID=0xa601 CODEC_ID=10ec0888
- [ 16.724283] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
- [ 16.724453] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
- [ 16.724532] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
- [ 16.724612] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
- [ 16.724689] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
- [ 16.724774] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
- [ 16.724851] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
- [ 16.724931] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
- [ 16.725382] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
- [ 16.725384] hda-intel 0000:01:00.1: Using LPIB position fix
- [ 16.725415] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
- [ 16.732327] hda-intel 0000:01:00.1: Enable sync_write for stable communication
- [ 16.732784] device-mapper: multipath: version 1.6.0 loaded
- [ 16.739285] HDMI ATI/AMD: no speaker allocation for ELD
- [ 16.739369] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
- [ 16.743385] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
- [ 16.743390] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 16.743393] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
- [ 16.743395] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 16.743397] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
- [ 16.743399] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 16.743401] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 16.816880] EXT4-fs (sde5): re-mounted. Opts: errors=remount-ro
- [ 16.902532] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 16.902634] r8169 0000:06:00.0 (unregistered net_device): not PCI Express
- [ 16.902861] r8169 0000:06:00.0 eth0: RTL8169sc/8110sc at 0xffffc90010724000, 00:50:8d:bb:df:6a, XID 18000000 IRQ 23
- [ 16.902863] r8169 0000:06:00.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
- [ 16.902942] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 16.903002] r8169 0000:06:01.0 (unregistered net_device): not PCI Express
- [ 16.903197] r8169 0000:06:01.0 eth1: RTL8169sc/8110sc at 0xffffc90010726000, 00:50:8d:bb:df:6b, XID 18000000 IRQ 22
- [ 16.903199] r8169 0000:06:01.0 eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok]
- [ 16.922121] hidraw: raw HID events driver (C) Jiri Kosina
- [ 16.979114] usbcore: registered new interface driver usbhid
- [ 16.979117] usbhid: USB HID core driver
- [ 17.031511] Linux video capture interface: v2.00
- [ 17.068773] gspca_main: v2.14.0 registered
- [ 17.099175] gspca_main: ov534-2.14.0 probing 1415:2000
- [ 17.452066] kvm: disabled by bios
- [ 17.774377] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input14
- [ 17.774451] hid-generic 0003:046D:C221.0001: input,hidraw0: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1a.0-2.1/input0
- [ 17.791424] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input15
- [ 17.791706] hid-generic 0003:046D:C221.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1a.0-2.1/input1
- [ 17.791967] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input16
- [ 17.792230] hid-generic 0003:04B4:0033.0003: input,hidraw2: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:1a.0-2.3/input0
- [ 17.799464] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.4/3-2.4:1.0/input/input17
- [ 17.799771] hid-generic 0003:046D:C222.0004: input,hiddev0,hidraw3: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1a.0-2.4/input0
- [ 17.800138] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input18
- [ 17.800402] hid-generic 0003:0A5C:4502.0005: input,hidraw4: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.7-1.5.1/input0
- [ 17.801818] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input19
- [ 17.802154] hid-generic 0003:0A5C:4503.0006: input,hidraw5: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.7-1.5.2/input0
- [ 17.815460] usb 1-1.5.1: input irq status -75 received
- [ 18.112323] init: failsafe main process (737) killed by TERM signal
- [ 18.150810] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 18.150813] Bluetooth: BNEP filters: protocol multicast
- [ 18.150822] Bluetooth: BNEP socket layer initialized
- [ 18.151777] Bluetooth: RFCOMM TTY layer initialized
- [ 18.151782] Bluetooth: RFCOMM socket layer initialized
- [ 18.151787] Bluetooth: RFCOMM ver 1.11
- [ 18.701081] usbcore: registered new interface driver ov534
- [ 18.979899] init: cups main process (868) killed by HUP signal
- [ 18.979910] init: cups main process ended, respawning
- [ 21.668831] r8169 0000:06:00.0 eth0: link down
- [ 21.668846] r8169 0000:06:00.0 eth0: link down
- [ 21.668883] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 21.669228] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 21.680753] r8169 0000:06:01.0 eth1: link down
- [ 21.680765] r8169 0000:06:01.0 eth1: link down
- [ 21.680780] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 21.681037] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 21.741541] init: samba-ad-dc main process (927) terminated with status 1
- [ 23.988216] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 23.992087] 3:1: cannot get min/max values for control 2 (id 3)
- [ 23.992265] usbcore: registered new interface driver snd-usb-audio
- [ 24.854494] init: alsa-restore main process (1247) terminated with status 99
- [ 25.799402] init: plymouth-upstart-bridge main process ended, respawning
- [ 25.804348] init: plymouth-upstart-bridge main process (1462) terminated with status 1
- [ 25.804358] init: plymouth-upstart-bridge main process ended, respawning
- [ 29.814402] current rate 2692321 is different from the runtime rate 16000
- [ 29.817214] current rate 5 is different from the runtime rate 16000
- [ 29.822339] current rate 40 is different from the runtime rate 16000
- [ 34.820220] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 39.820220] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 44.820221] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 49.820226] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 54.820221] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 54.821096] current rate 199990 is different from the runtime rate 16000
- [ 59.820227] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 64.820225] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 69.820225] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 74.820225] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 79.820228] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 84.820229] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 89.820234] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 94.820232] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 99.820232] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 104.820237] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 104.821234] current rate 400001 is different from the runtime rate 16000
- [ 109.820240] 4:2:1: cannot set freq 16000 to ep 0x84
- [ 110.688572] FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 231.616104] systemd-hostnamed[2373]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
- siranthony@CxIII ~ $
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement