router config

CiscoRouter#sh run
Building configuration...

Current configuration : 2400 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname CiscoRouter
!
enable secret 5 $1$y6CH$lzBm19PGxFuXm87rMwW3A/
!
no aaa new-model
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.5 192.168.1.9
ip dhcp excluded-address 192.168.1.10 192.168.1.15
!
ip dhcp pool 1
   network 192.168.1.0 255.255.255.0
   default-router 192.168.1.1
!
ip dhcp pool 2
   network 192.168.2.0 255.255.255.0
   default-router 192.168.2.1
!
ip dhcp pool 3
   network 192.168.3.0 255.255.255.0
   default-router 192.168.3.1
!
!
!
dot11 ssid mereni
   authentication open
   guest-mode
   infrastructure-ssid optional
!
power inline negotiation prestandard source
!
!
username Cisco password 7 072C285F4D06
!
bridge irb
!
!
interface Dot11Radio0
 ip address pool 2
 no ip route-cache
 antenna transmit left
 antenna receive right
 speed  basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
 station-role root
 world-mode dot11d country CZ indoor
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface Dot11Radio1
 ip address pool 3
 no ip route-cache
 !
 ssid mereni
 !
 traffic-metrics aggregate-report
 no dfs band block
 speed  basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
 channel width 40-above
 channel dfs
 station-role root access-point
 world-mode legacy
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
 ip address pool 1
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address 192.168.1.6 255.255.255.0
 no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
!
end

CiscoRouter#