Advertisement
Guest User

Untitled

a guest
Nov 20th, 2014
40
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 2.35 KB | None | 0 0
  1. OpenBSD 5.5 (GENERIC-SUNXI) #13: Sat Mar 8 14:07:16 EST 2014
  2. nick@bbb1.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC-SUNXI
  3. real mem = 1073741824 (1024MB)
  4. avail mem = 1039753216 (991MB)
  5. warning: no entropy supplied by boot loader
  6. mainbus0 at root
  7. cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
  8. cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
  9. cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
  10. sunxi0 at mainbus0: A1X
  11. sxipio0 at sunxi0
  12. sxiccmu0 at sunxi0
  13. a1xintc0 at sunxi0
  14. sxitimer0 at sunxi0: ticktimer 100hz @ 32KHz
  15. sxitimer1 at sunxi0: stattimer 128hz @ 32KHz
  16. sxitimer2 at sunxi0: cntrtimer @ 32KHz
  17. sxidog0 at sunxi0
  18. sxirtc0 at sunxi0
  19. sxiuart0 at sunxi0: console
  20. sxiuart1 at sunxi0
  21. sxiuart2 at sunxi0
  22. sxiuart3 at sunxi0
  23. sxiuart4 at sunxi0
  24. sxiuart5 at sunxi0
  25. sxiuart6 at sunxi0
  26. sxiuart7 at sunxi0
  27. sxie0 at sunxi0, address 02:c8:0a:80:b8:c7
  28. rlphy0 at sxie0 phy 1: RTL8201L 10/100 PHY, rev. 1
  29. ahci0 at sunxi0 GHC 0x80000000<AE> AHCI 1.1
  30. ahci0: capabilities 0x6726ff80<NCQ,SSNTF,SALP,SAL,SCLO,SAM,SPM,PMD,SSC,PSC,CCCS>, 1 ports, 32 cmds, gen 2 (3Gbps)
  31. ahci0: ports implemented: 0x00000001
  32. ahci0.0: port reset
  33. ahci0: device on port 0 didn't come ready, TFD: 0x80<BSY>
  34. ahci0.0: soft reset
  35. ahci0.0: stopping the port, softreset slot 31 was still active.
  36. ahci0: unable to communicate with device on port 0
  37. scsibus0 at ahci0: 32 targets
  38. ehci0 at sunxi0
  39. usb0 at ehci0: USB revision 2.0
  40. uhub0 at usb0 "Allwinner EHCI root hub" rev 2.00/1.00 addr 1
  41. ehci1 at sunxi0
  42. usb1 at ehci1: USB revision 2.0
  43. uhub1 at usb1 "Allwinner EHCI root hub" rev 2.00/1.00 addr 1
  44. gpio0 at sxipio0: 18 pins
  45. gpio1 at sxipio0: 24 pins
  46. gpio2 at sxipio0: 25 pins
  47. gpio3 at sxipio0: 28 pins
  48. gpio4 at sxipio0: 12 pins
  49. gpio5 at sxipio0: 6 pins
  50. gpio6 at sxipio0: 12 pins
  51. gpio7 at sxipio0: 28 pins
  52. gpio8 at sxipio0: 22 pins
  53. umass0 at uhub0 port 1 configuration 1 interface 0 "USB 2.0 Flash Disk" rev 2.00/11.00 addr 2
  54. umass0: using SCSI over Bulk-Only
  55. scsibus1 at umass0: 2 targets, initiator 0
  56. sd0 at scsibus1 targ 1 lun 0: <USB 2.0, Flash Disk, 1100> SCSI0 0/direct removable serial.090c1000012700007922
  57. sd0: 3871MB, 512 bytes/sector, 7928832 sectors
  58. vscsi0 at root
  59. scsibus2 at vscsi0: 256 targets
  60. softraid0 at root
  61. scsibus3 at softraid0: 256 targets
  62. boot device: sd0
  63. root on sd0a (a1cecb6cfce17196.a) swap on sd0b dump on sd0b
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement