[root@redirect etc]# cat accel-ppp_pppoe.conf
[modules]
log_file
#log_syslog
#log_tcp
#log_pgsql
#pptp
#l2tp
pppoe
#ipoe
vlan-mon

#auth_mschap_v2
#auth_mschap_v1
#auth_chap_md5
#auth_pap

#radius
ippool
#sigchld
#pppd_compat

#shaper
#shaper_tbf (obsolete)
#chap-secrets
#net-snmp
#logwtmp
#connlimit

#ipv6_nd
#ipv6_dhcp
#ipv6pool

[core]
log-error=/var/log/accel-ppp/pppoe/core.log
thread-count=1

[ipoe]
lua-file=/etc/accel-ppp.lua
username=lua:username
verbose=1
lease-time=300
max-lease-time=600

unit-cache=4000
offer-timeout=3

shared=0
ifcfg=0
mode=L2
start=dhcpv4

#######dhcp mode######
interface=re:eth0\.[1-9][0-9][0-9]\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
interface=re:eth0\.2[0-9][0-9][0-9]\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
relay=10.200.0.2

agent-remote-id=accel-pppd

proxy-arp=1
proto=100

[ppp]
verbose=1
min-mtu=1280
mtu=1400
mru=1400
ipv4=require
ipv6=deny
ipv6-intf-id=0:0:0:1
ipv6-peer-intf-id=0:0:0:2
ipv6-accept-peer-intf-id=1
lcp-echo-interval=20
lcp-echo-timeout=120
ccp=0

[auth]
#any-login=0
noauth=1

[pptp]
verbose=1

[pppoe]
##vlan-mon=eth0.999,10-200
vlan-timeout=120
unit-cache=1000
#vlan-name=%I.%N

vlan-mon=re:eth0\.999,1100-3999
vlan-mon=re:eth0\.2[0-9][0-9][0-9],1100-1999
vlan-mon=re:eth0\.3[0-9][0-9][0-9],1100-1999

#interface=re:eth0\.2[0-9][0-9][0-9]
#interface=re:eth0\.3[0-9][0-9][0-9]
#interface=re:eth0\.999

interface=re:eth0\.2[0-9][0-9][0-9]\.(\d+)$
interface=re:eth0\.3[0-9][0-9][0-9]\.(\d+)$
interface=re:eth0\.999\.(\d+)$

##interface=re:eth0\.2024\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2025\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2029\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100


##interface=re:eth0\.2201\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2202\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2203\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2204\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2205\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2206\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2207\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2208\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2209\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2210\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100
##interface=re:eth0\.2211\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100

##interface=re:eth0\.3005\.(\d+)$,relay=10.200.0.2,giaddr=10.200.0.100

##interface=re:eth0\.999\.(\d+)$

verbose=0

[l2tp]
verbose=1

[dns]
dns2=xx.xx.164.27

[radius]
#acct-interim-interval=300
dictionary=/usr/local/share/accel-ppp/radius/dictionary
nas-identifier=accel-ppp

nas-ip-address=10.200.10.7

#server=127.0.0.1,PASS,auth-port=1812,acct-port=1813,req-limit=0,fail-time=0
#dae-server=127.0.0.1:3799,PASS

verbose=0
#timeout=3
#max-try=3
acct-timeout=0
#acct-delay-time=0

[client-ip-range]
#192.168.10.0/24

[ip-pool]
gw-ip-address=xx.xx.164.6
#192.168.0.2-255
192.168.224.0/20
#192.168.2.1-255,pool2
#192.168.3.1-255,pool3
#192.168.4.0/24

[log]
log-file=/var/log/accel-ppp/pppoe/accel-ppp.log
log-emerg=/var/log/accel-ppp/pppoe/emerg.log
log-fail-file=/var/log/accel-ppp/pppoe/auth-fail.log
log-debug=/dev/stdout
copy=1
level=5

[log-pgsql]
conninfo=user=log
log-table=log

[pppd-compat]
ip-pre-up=/etc/ppp/ip-pre-up
verbose=0

[chap-secrets]
#gw-ip-address=192.168.100.1
#chap-secrets=/etc/ppp/chap-secrets

[shaper]
up-limiter=police
down-limiter=htb
#leaf-qdisc=sfq perturb 10
verbose=1

[cli]
telnet=127.0.0.1:2000
tcp=127.0.0.1:2001

[snmp]
master=0
agent-name=accel-ppp

[connlimit]
limit=10/min
burst=3
timeout=60

[ipv6-pool]
#fc00:0:1::/48,64
#delegate=fc00:1::/36,48

[ipv6-dns]
#fc00:1::1
#fc00:1::2
#fc00:1::3
#dnssl=suffix1.local.net
#dnssl=suffix2.local.net.

[ipv6-dhcp]
##verbose=1
##pref-lifetime=604800
##valid-lifetime=2592000
##route-via-gw=1