API tools faq
paste
Advertisement
Guest User

gsmart-hdd

a guest
Dec 15th, 2012
58
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 10.01 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-29-generic-pae] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     TOSHIBA MK3255GSX
  6. Serial Number:    49UNT13DT
  7. LU WWN Device Id: 5 000039 1b1b08b9a
  8. Firmware Version: FG010A
  9. User Capacity:    320,072,933,376 bytes [320 GB]
  10. Sector Size:      512 bytes logical/physical
  11. Device is:        Not in smartctl database [for details use: -P showall]
  12. ATA Version is:   8
  13. ATA Standard is:  Exact ATA specification draft version not indicated
  14. Local Time is:    Sun Dec 16 00:29:00 2012 UTC
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status:  (0x00) Offline data collection activity
  23.                     was never started.
  24.                     Auto Offline Data Collection: Disabled.
  25. Self-test execution status:      (  17) The self-test routine was aborted by
  26.                     the host.
  27. Total time to complete Offline
  28. data collection:        (  120) seconds.
  29. Offline data collection
  30. capabilities:            (0x5b) SMART execute Offline immediate.
  31.                     Auto Offline data collection on/off support.
  32.                     Suspend Offline collection upon new
  33.                     command.
  34.                     Offline surface scan supported.
  35.                     Self-test supported.
  36.                     No Conveyance Self-test supported.
  37.                     Selective Self-test supported.
  38. SMART capabilities:            (0x0003) Saves SMART data before entering
  39.                     power-saving mode.
  40.                     Supports SMART auto save timer.
  41. Error logging capability:        (0x01) Error logging supported.
  42.                     General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time:    (   2) minutes.
  45. Extended self-test routine
  46. recommended polling time:    ( 148) minutes.
  47. SCT capabilities:          (0x0039) SCT Status supported.
  48.                     SCT Error Recovery Control supported.
  49.                     SCT Feature Control supported.
  50.                     SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  55.   1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  56.   2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  57.   3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1385
  58.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       1999
  59.   5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       1681
  60.   7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  61.   8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  62.   9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       4440
  63.  10 Spin_Retry_Count        0x0033   139   100   030    Pre-fail  Always       -       0
  64.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1954
  65. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       165
  66. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       62
  67. 193 Load_Cycle_Count        0x0032   090   090   000    Old_age   Always       -       106475
  68. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       34 (Min/Max 15/48)
  69. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       875
  70. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       366
  71. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  72. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  73. 220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       93
  74. 222 Loaded_Hours            0x0032   092   092   000    Old_age   Always       -       3565
  75. 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  76. 224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
  77. 226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       335
  78. 240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 35914 (device log contains only the most recent five errors)
  82.     CR = Command Register [HEX]
  83.     FR = Features Register [HEX]
  84.     SC = Sector Count Register [HEX]
  85.     SN = Sector Number Register [HEX]
  86.     CL = Cylinder Low Register [HEX]
  87.     CH = Cylinder High Register [HEX]
  88.     DH = Device/Head Register [HEX]
  89.     DC = Device Command Register [HEX]
  90.     ER = Error register [HEX]
  91.     ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 35914 occurred at disk power-on lifetime: 4437 hours (184 days + 21 hours)
  97.   When the command that caused the error occurred, the device was active or idle.
  98.  
  99.   After command completion occurred, registers were:
  100.   ER ST SC SN CL CH DH
  101.   -- -- -- -- -- -- --
  102.   40 51 02 16 a7 2d e7  Error: UNC 2 sectors at LBA = 0x072da716 = 120432406
  103.  
  104.   Commands leading to the command that caused the error were:
  105.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  106.   -- -- -- -- -- -- -- --  ----------------  --------------------
  107.   c8 00 08 10 a7 2d e7 00      10:14:30.991  READ DMA
  108.   27 00 00 00 00 00 e0 00      10:14:30.991  READ NATIVE MAX ADDRESS EXT
  109.   ec 00 00 00 00 00 a0 00      10:14:30.983  IDENTIFY DEVICE
  110.   ef 03 42 00 00 00 a0 00      10:14:30.983  SET FEATURES [Set transfer mode]
  111.   27 00 00 00 00 00 e0 00      10:14:30.983  READ NATIVE MAX ADDRESS EXT
  112.  
  113. Error 35913 occurred at disk power-on lifetime: 4437 hours (184 days + 21 hours)
  114.   When the command that caused the error occurred, the device was active or idle.
  115.  
  116.   After command completion occurred, registers were:
  117.   ER ST SC SN CL CH DH
  118.   -- -- -- -- -- -- --
  119.   40 51 02 16 a7 2d e7  Error: UNC 2 sectors at LBA = 0x072da716 = 120432406
  120.  
  121.   Commands leading to the command that caused the error were:
  122.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  123.   -- -- -- -- -- -- -- --  ----------------  --------------------
  124.   c8 00 08 10 a7 2d e7 00      10:14:27.111  READ DMA
  125.   27 00 00 00 00 00 e0 00      10:14:27.111  READ NATIVE MAX ADDRESS EXT
  126.   ec 00 00 00 00 00 a0 00      10:14:27.104  IDENTIFY DEVICE
  127.   ef 03 42 00 00 00 a0 00      10:14:27.103  SET FEATURES [Set transfer mode]
  128.   27 00 00 00 00 00 e0 00      10:14:27.103  READ NATIVE MAX ADDRESS EXT
  129.  
  130. Error 35912 occurred at disk power-on lifetime: 4437 hours (184 days + 21 hours)
  131.   When the command that caused the error occurred, the device was active or idle.
  132.  
  133.   After command completion occurred, registers were:
  134.   ER ST SC SN CL CH DH
  135.   -- -- -- -- -- -- --
  136.   40 51 02 16 a7 2d e7  Error: UNC 2 sectors at LBA = 0x072da716 = 120432406
  137.  
  138.   Commands leading to the command that caused the error were:
  139.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  140.   -- -- -- -- -- -- -- --  ----------------  --------------------
  141.   c8 00 08 10 a7 2d e7 00      10:14:23.256  READ DMA
  142.   27 00 00 00 00 00 e0 00      10:14:23.256  READ NATIVE MAX ADDRESS EXT
  143.   ec 00 00 00 00 00 a0 00      10:14:23.248  IDENTIFY DEVICE
  144.   ef 03 42 00 00 00 a0 00      10:14:23.248  SET FEATURES [Set transfer mode]
  145.   27 00 00 00 00 00 e0 00      10:14:23.248  READ NATIVE MAX ADDRESS EXT
  146.  
  147. Error 35911 occurred at disk power-on lifetime: 4437 hours (184 days + 21 hours)
  148.   When the command that caused the error occurred, the device was active or idle.
  149.  
  150.   After command completion occurred, registers were:
  151.   ER ST SC SN CL CH DH
  152.   -- -- -- -- -- -- --
  153.   40 51 02 16 a7 2d e7  Error: UNC 2 sectors at LBA = 0x072da716 = 120432406
  154.  
  155.   Commands leading to the command that caused the error were:
  156.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  157.   -- -- -- -- -- -- -- --  ----------------  --------------------
  158.   c8 00 08 10 a7 2d e7 00      10:14:19.400  READ DMA
  159.   27 00 00 00 00 00 e0 00      10:14:19.400  READ NATIVE MAX ADDRESS EXT
  160.   ec 00 00 00 00 00 a0 00      10:14:19.392  IDENTIFY DEVICE
  161.   ef 03 42 00 00 00 a0 00      10:14:19.392  SET FEATURES [Set transfer mode]
  162.   27 00 00 00 00 00 e0 00      10:14:19.392  READ NATIVE MAX ADDRESS EXT
  163.  
  164. Error 35910 occurred at disk power-on lifetime: 4437 hours (184 days + 21 hours)
  165.   When the command that caused the error occurred, the device was active or idle.
  166.  
  167.   After command completion occurred, registers were:
  168.   ER ST SC SN CL CH DH
  169.   -- -- -- -- -- -- --
  170.   40 51 02 16 a7 2d e7  Error: UNC 2 sectors at LBA = 0x072da716 = 120432406
  171.  
  172.   Commands leading to the command that caused the error were:
  173.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  174.   -- -- -- -- -- -- -- --  ----------------  --------------------
  175.   c8 00 08 10 a7 2d e7 00      10:14:15.524  READ DMA
  176.   27 00 00 00 00 00 e0 00      10:14:15.524  READ NATIVE MAX ADDRESS EXT
  177.   ec 00 00 00 00 00 a0 00      10:14:15.516  IDENTIFY DEVICE
  178.   ef 03 42 00 00 00 a0 00      10:14:15.516  SET FEATURES [Set transfer mode]
  179.   27 00 00 00 00 00 e0 00      10:14:15.516  READ NATIVE MAX ADDRESS EXT
  180.  
  181. SMART Self-test log structure revision number 1
  182. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  183. # 1  Extended offline    Aborted by host               10%      3188         -
  184.  
  185. SMART Selective self-test log data structure revision number 1
  186.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  187.     1        0        0  Not_testing
  188.     2        0        0  Not_testing
  189.     3        0        0  Not_testing
  190.     4        0        0  Not_testing
  191.     5        0        0  Not_testing
  192. Selective self-test flags (0x0):
  193.   After scanning selected spans, do NOT read-scan remainder of disk.
  194. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!