API tools faq
paste
Guest User

achedub-dmesg output

a guest
Sep 17th, 2015
117
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.81 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000@0] Booting Linux on physical CPU 0x200
  2. [ 0.000000@0] Initializing cgroup subsys cpuset
  3. [ 0.000000@0] Initializing cgroup subsys cpu
  4. [ 0.000000@0] Initializing cgroup subsys cpuacct
  5. [ 0.000000@0] Linux version 3.10.75 (kivutar@superserver) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri May 29 16:07:14 CEST 2015
  6. [ 0.000000@0] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
  7. [ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000@0] Machine: ODROIDC, model: AMLOGIC
  9. [ 0.000000@0] physical memory start address is 0x200000
  10. [ 0.000000@0] reserved_end is d9fffff
  11. [ 0.000000@0]
  12. [ 0.000000@0] Total memory is 1022 MiB
  13. [ 0.000000@0] Reserved low memory from 0x06000000 to 0x0d9fffff, size: 122 MiB
  14. [ 0.000000@0] mesonfb0(low) : 0x06100000 - 0x07900000 ( 24 MiB)
  15. [ 0.000000@0] mesonfb1(low) : 0x07900000 - 0x07a00000 ( 1 MiB)
  16. [ 0.000000@0] mesonstream0(low) : 0x07a00000 - 0x09a00000 ( 32 MiB)
  17. [ 0.000000@0] vdec0(low) : 0x09a00000 - 0x0da00000 ( 64 MiB)
  18. [ 0.000000@0] ppmgr0(high) : 0x3f000000 - 0x40000000 ( 16 MiB)
  19. [ 0.000000@0] cma: CMA: reserved 8 MiB at 3e800000
  20. [ 0.000000@0] Memory policy: ECC disabled, Data cache writealloc
  21. [ 0.000000@0] On node 0 totalpages: 222720
  22. [ 0.000000@0] free_area_init_node: node 0, pgdat c0c8c500, node_mem_map c0f92000
  23. [ 0.000000@0] Normal zone: 1520 pages used for memmap
  24. [ 0.000000@0] Normal zone: 0 pages reserved
  25. [ 0.000000@0] Normal zone: 159744 pages, LIFO batch:31
  26. [ 0.000000@0] HighMem zone: 492 pages used for memmap
  27. [ 0.000000@0] HighMem zone: 62976 pages, LIFO batch:15
  28. [ 0.000000@0] Meson chip version = RevA (1B:A - 0:B72)
  29. [ 0.000000@0] PERCPU: Embedded 8 pages/cpu @c177b000 s8384 r8192 d16192 u32768
  30. [ 0.000000@0] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
  31. [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  32. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 221200
  33. [ 0.000000@0] Kernel command line: console=ttyS0,115200n8 console=tty0 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 ro no_console_suspend vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=1080p m_bpp=16 vout=hdmi ssh quiet consoleblank=0
  34. [ 0.000000@0] cvbs trimming line = 0xa000
  35. [ 0.000000@0] cvbs trimming.1.v5: 0xa0, 0x0
  36. [ 0.000000@0] osd1:1
  37. [ 0.000000@0] loaded:268435459
  38. [ 0.000000@0] logo has been loaded
  39. [ 0.000000@0] 720p:10
  40. [ 0.000000@0] full:2
  41. [ 0.000000@0] kernel get cvbsmode form uboot is 576cvbs
  42. [ 0.000000@0] kernel get hdmimode form uboot is 1080p
  43. [ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
  44. [ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  45. [ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  46. [ 0.000000@0] allocated 2060288 bytes of page_cgroup
  47. [ 0.000000@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  48. [ 0.000000@0] Memory: 64MB 16MB 790MB = 870MB total
  49. [ 0.000000@0] Memory: 855656k/855656k available, 35224k reserved, 243712K highmem
  50. [ 0.000000@0] Virtual kernel memory layout:
  51. [ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  52. [ 0.000000@0] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  53. [ 0.000000@0] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  54. [ 0.000000@0] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  55. [ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  56. [ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  57. [ 0.000000@0] .text : 0xc0008000 - 0xc093cf54 (9428 kB)
  58. [ 0.000000@0] .init : 0xc093d000 - 0xc0c120c0 (2901 kB)
  59. [ 0.000000@0] .data : 0xc0c14000 - 0xc0c8d440 ( 486 kB)
  60. [ 0.000000@0] .bss : 0xc0c8d440 - 0xc0f8d27c (3072 kB)
  61. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  62. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  63. [ 0.000000@0] NR_IRQS:256
  64. [ 0.000000@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  65. [ 0.000000@0] Global timer: MESON TIMER-F (c0c2f3c0) initialized
  66. [ 0.000000@0] Switching to timer-based delay loop
  67. [ 0.000000@0] Console: colour dummy device 80x30
  68. [ 0.000000@0] console [tty0] enabled
  69. [ 0.000000@0] meson_serial_console_setup
  70. [ 0.000000@0] console [ttyS0] enabled
  71. [ 0.001045@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
  72. [ 0.001067@0] pid_max: default: 32768 minimum: 301
  73. [ 0.001283@0] Security Framework initialized
  74. [ 0.001336@0] AppArmor: AppArmor initialized
  75. [ 0.001411@0] Mount-cache hash table entries: 512
  76. [ 0.007302@0] Initializing cgroup subsys memory
  77. [ 0.007370@0] Initializing cgroup subsys devices
  78. [ 0.007386@0] Initializing cgroup subsys freezer
  79. [ 0.007397@0] Initializing cgroup subsys perf_event
  80. [ 0.007545@0] CPU: Testing write buffer coherency: ok
  81. [ 0.008094@0] CPU0: thread -1, cpu 0, socket 2, mpidr 80000200
  82. [ 0.008188@0] Setting up static identity map for 0xc0683940 - 0xc0683998
  83. [ 0.008323@0] L310 cache controller enabled
  84. [ 0.008341@0] l2x0: 8 ways, 2048 sets, CACHE_ID 0x4100a0c9, Cache size: 524288 B
  85. [ 0.008349@0] AUX_CTRL 0x7ec60001, PERFETCH_CTRL 0x75000007, POWER_CTRL 0x00000000
  86. [ 0.008355@0] TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222
  87. [ 0.080315@1] CPU1: Booted secondary processor
  88. [ 0.080334@1] CPU1: thread -1, cpu 1, socket 2, mpidr 80000201
  89. [ 0.100314@2] CPU2: Booted secondary processor
  90. [ 0.100332@2] CPU2: thread -1, cpu 2, socket 2, mpidr 80000202
  91. [ 0.120310@3] CPU3: Booted secondary processor
  92. [ 0.120328@3] CPU3: thread -1, cpu 3, socket 2, mpidr 80000203
  93. [ 0.120418@0] Brought up 4 CPUs
  94. [ 0.120447@0] SMP: Total of 4 processors activated (8.00 BogoMIPS).
  95. [ 0.120453@0] CPU: All CPU(s) started in SVC mode.
  96. [ 0.121175@0] devtmpfs: initialized
  97. [ 0.127705@0] clkrate [ xtal ] : 24000000
  98. [ 0.127718@0] clkrate [ pll_sys ] : 1200000000
  99. [ 0.127726@0] clkrate [ pll_fixed ] : 2550000000
  100. [ 0.127733@0] clkrate [ pll_vid ] : 732000000
  101. [ 0.127739@0] clkrate [ pll_ddr ] : 0
  102. [ 0.127746@0] clkrate [ a9_clk ] : 1200000000
  103. [ 0.127754@0] clkrate [ clk81 ] : 159375000
  104. [ 0.128196@0] pinctrl core: initialized pinctrl subsystem
  105. [ 0.128440@0] regulator-dummy: no parameters
  106. [ 0.128935@0] NET: Registered protocol family 16
  107. [ 0.133069@0] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  108. [ 0.134148@0] VPU driver version: v02
  109. [ 0.134158@0] load vpu_clk in dts: 182150000Hz(3)
  110. [ 0.134181@0] vpu_probe OK
  111. [ 0.136399@0] amlogic_gpio gpio: Probed amlogic GPIO driver
  112. [ 0.136770@0] register lm device lm-root
  113. [ 0.136819@0] register lm device lm1
  114. [ 0.136867@0] register lm device lm0
  115. [ 0.136946@0] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
  116. [ 0.136954@0] hw-breakpoint: maximum watchpoint size is 4 bytes.
  117. [ 0.137057@0] Init pinux probe!
  118. [ 0.137732@0] pinmux-m8b pinmux: Probed amlogic pinctrl driver
  119. [ 0.137770@0] tv_init_module
  120. [ 0.137784@0] major number 254 for disp
  121. [ 0.137790@0] vout_register_server
  122. [ 0.137796@0] register tv module server ok
  123. [ 0.137854@0] hdmitx: system: amhdmitx_init
  124. [ 0.137864@0] hdmitx: system: Ver: 2014May6
  125. [ 0.137934@0] hdmitx: system: amhdmitx_probe
  126. [ 0.138257@0] hdmitx: system: gate/pwr cmd: 7
  127. [ 0.138267@0] hdmitx: system: ALREADY init VIC = 4
  128. [ 0.138273@0] hdmitx: system: gate/pwr cmd: 0
  129. [ 0.138708@1] hdmitx: system: reset intr mask
  130. [ 0.150372@0] hdmitx: system: irq 1
  131. [ 0.170909@0] bio: create slab <bio-0> at 0
  132. [ 0.171563@0] SCSI subsystem initialized
  133. [ 0.171750@0] usbcore: registered new interface driver usbfs
  134. [ 0.171799@0] usbcore: registered new interface driver hub
  135. [ 0.171898@0] usbcore: registered new device driver usb
  136. [ 0.172019@0] media: Linux media interface: v0.10
  137. [ 0.172059@0] Linux video capture interface: v2.00
  138. [ 0.172496@0] request vpu clk holdings: vencp 159375000Hz
  139. [ 0.172507@0] TV mode 1080p selected.
  140. [ 0.172518@0] tvoutc_setmode[458]
  141. [ 0.172527@0] aml_logo: outputmode changed(10->22), reset osd1 scaler.
  142. [ 0.260684@1] hdmitx: system: gate/pwr cmd: 4
  143. [ 0.470610@1] hdmitx: system: gate/pwr cmd: 5
  144. [ 0.470617@1] hdmitx: edid: edid ready
  145. [ 0.470623@1] hdmitx: system: gate/pwr cmd: 4
  146. [ 0.680609@1] hdmitx: system: gate/pwr cmd: 5
  147. [ 0.680617@1] hdmitx: edid: edid ready
  148. [ 0.680626@1] hdmitx: edid: 1 errors between two reading
  149. [ 0.680632@1] hdmitx: edid: check sum valid
  150. [ 0.680638@1] hdmitx: edid: check sum invalid
  151. [ 0.680644@1] hdmitx: edid: blk0 raw data
  152. [ 0.680650@1] 00ffffffffffff004c2d6706010000002f130103801009780aee91a3544c9926
  153. [ 0.680705@1] 0f5054bdef80714f8100814081809500950fb300a940023a801871382d40582c
  154. [ 0.680760@1] 4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd0018
  155. [ 0.680814@1] 4b1a5117000a202020202020000000fc0053414d53554e470a20202020200129
  156. [ 0.680868@1]
  157. [ 0.680873@1] hdmitx: edid: blk1 raw data
  158. [ 0.680878@1] 020322f1669004050320222309070783010000e2000fe305030167030c002000
  159. [ 0.680932@1] b82d011d007251d01e206e285500a05a0000001e011d8018711c1620582c2500
  160. [ 0.680986@1] a05a0000009e8c0ad08a20e02d10103e9600a05a000000180000000000000000
  161. [ 0.681040@1] 00000000000000000000000000000000000000000000000000000000000000df
  162. [ 0.681094@1]
  163. [ 0.681099@1] hdmitx: edid: check sum valid
  164. [ 0.681105@1] hdmitx: edid: check sum valid
  165. [ 0.681111@1] hdmitx: edid: blk0 raw data
  166. [ 0.681116@1] 00ffffffffffff004c2d6706010000002f130103801009780aee91a3544c9926
  167. [ 0.681170@1] 0f5054bdef80714f8100814081809500950fb300a940023a801871382d40582c
  168. [ 0.681225@1] 4500a05a0000001e662150b051001b3040703600a05a0000001e000000fd0018
  169. [ 0.681279@1] 4b1a5117000a202020202020000000fc0053414d53554e470a20202020200129
  170. [ 0.681333@1]
  171. [ 0.681338@1] hdmitx: edid: blk1 raw data
  172. [ 0.681343@1] 020322f1469004050320222309070783010000e2000fe305030167030c002000
  173. [ 0.681397@1] b82d011d007251d01e206e285500a05a0000001e011d8018711c1620582c2500
  174. [ 0.681451@1] a05a0000009e8c0ad08a20e02d10103e9600a05a000000180000000000000000
  175. [ 0.681506@1] 00000000000000000000000000000000000000000000000000000000000000df
  176. [ 0.681559@1]
  177. [ 0.682133@1] hdmitx: edid: find IEEEOUT
  178. [ 0.682143@1] hdmitx: edid: HDMI: set default vic
  179. [ 0.682172@1] hdmitx: video: get current mode: 1080p
  180. [ 0.682186@1] hdmitx: system: gate/pwr cmd: 7
  181. [ 0.682235@1] hdmitx: system: already init VIC = 0 Now VIC = 16
  182. [ 0.682245@1] hdmitx: system: 16 (cd0,cs0,pm1,vd0,1)
  183. [ 0.682251@1] hdmitx: system: gate/pwr cmd: 0
  184. [ 0.682258@1] hdmitx: system: hw reset
  185. [ 0.683306@1] hdmitx: audio: SPDIF
  186. [ 0.703353@1] hdmitx: system: set pll
  187. [ 0.703360@1] hdmitx: system: param->VIC:16
  188. [ 0.703367@1] mode is: 22
  189. [ 0.703374@1] VPU_VIU_VENC_MUX_CTRL: 0xa
  190. [ 0.703379@1] viu chan = 1
  191. [ 0.703384@1] VPU_VIU_VENC_MUX_CTRL: 0xa
  192. [ 0.703389@1] config HPLL
  193. [ 0.720372@1] config HPLL done
  194. [ 0.720387@1] enc_vpu_bridge_reset[314]
  195. [ 0.724656@0] Advanced Linux Sound Architecture Driver Initialized.
  196. [ 0.725108@0] Bluetooth: Core ver 2.16
  197. [ 0.725159@0] NET: Registered protocol family 31
  198. [ 0.725167@0] Bluetooth: HCI device and connection manager initialized
  199. [ 0.725182@0] Bluetooth: HCI socket layer initialized
  200. [ 0.725193@0] Bluetooth: L2CAP socket layer initialized
  201. [ 0.725217@0] Bluetooth: SCO socket layer initialized
  202. [ 0.725391@0] Loading modules backported from Linux version next-20150129-0-g828f79f
  203. [ 0.725400@0] Backport integrated by backports.git backports-20150129-0-gdd4a670
  204. [ 0.725637@0] cfg80211: Calling CRDA to update world regulatory domain
  205. [ 0.726234@0] Switching to clocksource Timer-E
  206. [ 0.726580@0] AppArmor: AppArmor Filesystem Enabled
  207. [ 0.734618@0] NET: Registered protocol family 2
  208. [ 0.735315@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  209. [ 0.735425@0] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  210. [ 0.735531@0] TCP: Hash tables configured (established 8192 bind 8192)
  211. [ 0.735594@0] TCP: reno registered
  212. [ 0.735607@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
  213. [ 0.735639@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  214. [ 0.735850@0] NET: Registered protocol family 1
  215. [ 0.745143@0] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 3 counters available
  216. [ 0.745736@0] audit: initializing netlink socket (disabled)
  217. [ 0.745773@0] type=2000 audit(0.720:1): initialized
  218. [ 0.746509@0] bounce pool size: 64 pages
  219. [ 0.751558@0] VFS: Disk quotas dquot_6.5.2
  220. [ 0.751782@0] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  221. [ 0.753165@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  222. [ 0.753404@0] msgmni has been set to 1195
  223. [ 0.754843@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  224. [ 0.754856@0] io scheduler noop registered
  225. [ 0.754863@0] io scheduler deadline registered
  226. [ 0.754979@0] io scheduler cfq registered (default)
  227. [ 0.804514@0] [drm] Initialized drm 1.1.0 20060810
  228. [ 0.804688@0] gpu cooling register okay with err=0
  229. [ 0.866288@1] hdmitx: system: phy setting done
  230. [ 0.866300@1] hdmi: Fixing to HDMI Mode
  231. [ 0.866341@1] hdmi: Sink is HDMI device
  232. [ 0.868322@1] hdmi: No sink attached
  233. [ 0.871907@1] hdmitx: audio: audio channel num is 0
  234. [ 0.871917@1] hdmitx: audio: SPDIF
  235. [ 0.871931@1] hdmitx: audio: current VIC: 16
  236. [ 0.871937@1] hdmitx: audio: audio sample rate: 0
  237. [ 0.871942@1] hdmitx: audio: reset audio N para
  238. [ 0.871955@1] hdmitx: audio: PCM out to HDMI
  239. [ 0.888320@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  240. [ 0.888327@1] hdmitx: audio: i2s_to_spdif_flag:1
  241. [ 0.888333@1] hdmitx: audio: Enable audio spdif to HDMI
  242. [ 0.888384@1] hdmitx: audio: audio channel num is 0
  243. [ 0.888393@1] hdmitx: audio: SPDIF
  244. [ 0.888406@1] hdmitx: audio: current VIC: 16
  245. [ 0.888412@1] hdmitx: audio: audio sample rate: 0
  246. [ 0.888417@1] hdmitx: audio: reset audio N para
  247. [ 0.888429@1] hdmitx: audio: PCM out to HDMI
  248. [ 0.904762@1] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  249. [ 0.904769@1] hdmitx: audio: i2s_to_spdif_flag:1
  250. [ 0.904774@1] hdmitx: audio: Enable audio spdif to HDMI
  251. [ 0.904824@1] hdmitx: cec: CEC not ready
  252. [ 0.972675@3] Mali: Mali device driver loaded
  253. [ 0.972884@3] UMP: UMP device driver -a9f6941 loaded
  254. [ 0.976090@3] loop: module loaded
  255. [ 0.976668@3] tun: Universal TUN/TAP device driver, 1.6
  256. [ 0.976677@3] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  257. [ 0.976829@3] PPP generic driver version 2.4.2
  258. [ 0.977194@3] usbcore: registered new interface driver usb-storage
  259. [ 0.977295@3] usbcore: registered new interface driver usbserial
  260. [ 0.977332@3] usbcore: registered new interface driver usbserial_generic
  261. [ 0.977364@3] usbserial: USB Serial support registered for generic
  262. [ 0.977636@3] mousedev: PS/2 mouse device common for all mice
  263. [ 0.978332@3] usbcore: registered new interface driver iforce
  264. [ 0.978925@3] usbcore: registered new interface driver xpad
  265. [ 0.978981@3] i2c /dev entries driver
  266. [ 0.979321@3] device-mapper: uevent: version 1.0.3
  267. [ 0.979603@3] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
  268. [ 0.979737@3] Bluetooth: HCI UART driver ver 2.2
  269. [ 0.979746@3] Bluetooth: HCI H4 protocol initialized
  270. [ 0.979752@3] Bluetooth: HCI BCSP protocol initialized
  271. [ 0.979758@3] Bluetooth: HCILL protocol initialized
  272. [ 0.979764@3] Bluetooth: HCIATH3K protocol initialized
  273. [ 0.979770@3] Bluetooth: HCI Three-wire UART (H5) protocol initialized
  274. [ 0.980385@3] ledtrig-cpu: registered to indicate activity on CPUs
  275. [ 0.980446@3] hidraw: raw HID events driver (C) Jiri Kosina
  276. [ 0.980704@3] usbcore: registered new interface driver usbhid
  277. [ 0.980712@3] usbhid: USB HID core driver
  278. [ 0.980937@3] efuse===========================================
  279. [ 0.981092@3] efuse: device efuse created
  280. [ 0.981147@3] efuse--------------------------------------------
  281. [ 0.981154@3] vout_init_module
  282. [ 0.981193@3] start init vout module
  283. [ 0.981231@3] create vout attribute ok
  284. [ 0.981302@3] ge2d_init
  285. [ 0.981312@3] ge2d_dev major:244
  286. [ 0.981474@3] ge2d start monitor
  287. [ 0.981559@3] osd_init
  288. [ 0.981567@1] ge2d workqueue monitor start
  289. [ 0.981610@3] osd_probe, vinfo:c06c5680
  290. [ 0.981925@3] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
  291. [ 0.981933@3] osd_probe, mydef_var:c0c617ec, vinfo:c06c5680
  292. [ 0.981941@3] init fbdev bpp is :32
  293. [ 0.981947@3] ---------------clear framebuffer0 memory
  294. [ 1.017894@0] Console: switching to colour frame buffer device 160x45
  295. [ 1.030140@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
  296. [ 1.030149@0] osd_probe, mydef_var:c0c617ec, vinfo:c06c5680
  297. [ 1.030155@0] don't find to display_size_default from mesonfb-dts
  298. [ 1.030160@0] init fbdev bpp is :24
  299. [ 1.038102@0] osd probe ok
  300. [ 1.038115@0] hdmitx: video: get current mode: 1080p
  301. [ 1.038128@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
  302. [ 1.088691@0] amlvideo-000: V4L2 device registered as video10
  303. [ 1.088947@0] ionvideo-000: V4L2 device registered as video13
  304. [ 1.088956@0] Video Technology Magazine Ion Video Capture Board ver 1.0 successfully loaded.
  305. [ 1.088963@0] DI: di_init
  306. [ 1.089057@0] aml_wdt_driver_init,301
  307. [ 1.089065@0] ** disable watchdog
  308. [ 1.089456@0] set uart_ao pinmux use pinctrl subsystem
  309. [ 1.089464@0] P_AO_RTI_PIN_MUX_REG:78021801
  310. [ 1.089490@0] start uart_ao_ttyS0:(irq = 122)
  311. [ 1.089496@0] register uart_ao ok
  312. [ 1.089755@0] set uart_b pinmux use pinctrl subsystem
  313. [ 1.089764@0] P_AO_RTI_PIN_MUX_REG:78021801
  314. [ 1.089784@0] start uart_b_ttyS2:(irq = 107)
  315. [ 1.089791@0] register uart_b ok
  316. [ 1.089871@0] dwc_otg: version 3.10a 12-MAY-2014
  317. [ 1.089902@0] dwc_otg lm-root: dwc_otg_driver_probe(ef343800)
  318. [ 1.089911@0] dwc_otg_driver_probe NOT match
  319. [ 1.089938@0] dwc_otg lm1: dwc_otg_driver_probe(ef343a00)
  320. [ 1.129941@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
  321. [ 1.129961@0] USB (1) use clock source: XTAL input
  322. [ 1.131018@0] dwc_otg lm1: base=0xfe080000
  323. [ 1.131028@0] dwc_otg lm1: dwc_otg_device=0xef3cd580
  324. [ 1.151155@0] Core Release: 3.10a
  325. [ 1.151166@0] Setting default values for core params
  326. [ 1.151181@0] curmode: 1, host_only: 1
  327. [ 1.151199@0] dwc_otg lm1: DMA config: BURST_DEFAULT
  328. [ 1.171370@0] Using Buffer DMA mode
  329. [ 1.171381@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  330. [ 1.171388@0] Working on port type = HOST
  331. [ 1.171665@0] dwc_otg lm1: DWC OTG Controller
  332. [ 1.171695@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
  333. [ 1.171740@0] dwc_otg lm1: irq 63, io mem 0x00000000
  334. [ 1.171748@0] -------hcd->flags.d32 = 0
  335. [ 1.171774@0] Init: Port Power? op_state=1
  336. [ 1.171779@0] Init1: Power Port (0)
  337. [ 1.172340@0] hub 1-0:1.0: USB hub found
  338. [ 1.172361@0] hub 1-0:1.0: 1 port detected
  339. [ 1.172611@0] dwc_otg lm0: dwc_otg_driver_probe(ef343c00)
  340. [ 1.172648@0] usb0: type: 0, speed: 0, config: 0, dma: 0, id: 0, phy: fe108800, ctrl: fe040000
  341. [ 1.172665@0] USB (0) use clock source: XTAL input
  342. [ 1.173673@0] dwc_otg lm0: base=0xfe040000
  343. [ 1.173682@0] dwc_otg lm0: dwc_otg_device=0xeea7af40
  344. [ 1.193778@0] Core Release: 3.10a
  345. [ 1.193791@0] Setting default values for core params
  346. [ 1.193803@0] curmode: 1, host_only: 0
  347. [ 1.233789@0] dwc_otg lm0: DMA config: BURST_DEFAULT
  348. [ 1.253930@0] Using Buffer DMA mode
  349. [ 1.253940@0] OTG VER PARAM: 1, OTG VER FLAG: 1
  350. [ 1.253947@0] Working on port type = OTG
  351. [ 1.253953@0] Current port type: SLAVE
  352. [ 1.254175@0] dwc_otg lm0: DWC OTG Controller
  353. [ 1.254214@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
  354. [ 1.254244@0] dwc_otg lm0: irq 62, io mem 0x00000000
  355. [ 1.254710@0] hub 2-0:1.0: USB hub found
  356. [ 1.254730@0] hub 2-0:1.0: 1 port detected
  357. [ 1.254921@0] Dedicated Tx FIFOs mode
  358. [ 1.255348@0] using timer detect id change, eea4d800
  359. [ 1.255511@0] ethernet_driver probe!
  360. [ 1.255534@0] ethernetinit(dbg[c0c66408]=1)
  361. [ 1.255564@0] ethernet base addr is fe0c0000
  362. [ 1.255605@0] write mac add to:eea87188: 00 1e 06 00 8c cb |.....|
  363. [ 1.258271@0] libphy: AMLMAC MII Bus: probed
  364. [ 1.258284@0] eth0: PHY ID 001cc916 at 0 IRQ -1 (0:00) active
  365. [ 1.258292@0] eth0: PHY ID 001cc916 at 1 IRQ -1 (0:01) active
  366. [ 1.258441@0] amvideocap_init_module
  367. [ 1.258587@0] Amlogic A/V streaming port init
  368. [ 1.259975@0] init vdec memsource 161480704->228589567
  369. [ 1.260075@0] [tsync_pcr_init]init success.
  370. [ 1.260130@0] regist mpeg12 codec profile
  371. [ 1.260177@0] regist mpeg4 codec profile
  372. [ 1.260184@0] amvdec_vc1 module init
  373. [ 1.260228@0] regist vc1 codec profile
  374. [ 1.260234@0] amvdec_h264 module init
  375. [ 1.260308@0] regist h264 codec profile
  376. [ 1.260315@0] amvdec_h265 module init
  377. [ 1.260359@0] regist hevc codec profile
  378. [ 1.260405@0] regist mjpeg codec profile
  379. [ 1.260411@0] amvdec_real module init
  380. [ 1.260457@0] regist real codec profile
  381. [ 1.260463@0] amvdec_avs module init
  382. [ 1.260626@0] regist avc codec profile
  383. [ 1.260632@0] jpegenc module init
  384. [ 1.260846@0] alloc_keep_buffer keep_y_addr ee600000
  385. [ 1.260923@0] alloc_keep_buffer keep_u_addr eeb00000
  386. [ 1.260956@0] alloc_keep_buffer keep_v_addr eec00000
  387. [ 1.260981@0] yaddr=ee600000,u_addr=eeb00000,v_addr=eec00000
  388. [ 1.261291@0] create_ge2d_work_queue video task ok
  389. [ 1.261537@0] SARADC Driver init.
  390. [ 1.261657@0] __saradc_probe__
  391. [ 1.366344@1] Indeed it is in host mode hprt0 = 00021501
  392. [ 1.406407@0] saradc calibration: ref_val = 508
  393. [ 1.406415@0] saradc calibration: ref_nominal = 512
  394. [ 1.406421@0] saradc calibration: coef = 4088
  395. [ 1.406666@0] ir irblaster probe
  396. [ 1.406874@0] Remote Driver
  397. [ 1.406978@0] ==touch_ts_init==
  398. [ 1.407068@0] ==ft5x0x_ts_init==
  399. [ 1.407100@0] ==goodix_ts_init==
  400. [ 1.407152@0] i2c-core: driver [gslx680_compatible] using legacy suspend method
  401. [ 1.407159@0] i2c-core: driver [gslx680_compatible] using legacy resume method
  402. [ 1.407197@0] !!!ntp_ts: ret = 0.
  403. [ 1.407204@0] VTL ct36x TouchScreen driver, <[email protected]>.
  404. [ 1.407238@0] i2c-core: driver [ct36x] using legacy suspend method
  405. [ 1.407245@0] i2c-core: driver [ct36x] using legacy resume method
  406. [ 1.407251@0] VTL ct36x TouchScreen driver End.
  407. [ 1.407256@0] ==gsl_ts_init==
  408. [ 1.407286@0] ret=0
  409. [ 1.407446@0] i2c-core: driver [mir3da] using legacy suspend method
  410. [ 1.407453@0] i2c-core: driver [mir3da] using legacy resume method
  411. [ 1.407482@0] i2c-core: driver [lis3dh_acc] using legacy suspend method
  412. [ 1.407489@0] i2c-core: driver [lis3dh_acc] using legacy resume method
  413. [ 1.407540@0] i2c-core: driver [bma222] using legacy suspend method
  414. [ 1.407546@0] i2c-core: driver [bma222] using legacy resume method
  415. [ 1.407605@0] i2c-core: driver [dmard06] using legacy suspend method
  416. [ 1.407612@0] i2c-core: driver [dmard06] using legacy resume method
  417. [ 1.407643@0] lsm303d driver: init
  418. [ 1.407695@0] i2c-core: driver [dmard10] using legacy suspend method
  419. [ 1.407701@0] i2c-core: driver [dmard10] using legacy resume method
  420. [ 1.407732@0] stk8313_init
  421. [ 1.407761@0] ======stk831x init ok======
  422. [ 1.407767@0] stk831x_init
  423. [ 1.407796@0] mxc622x accelerometer driver: init
  424. [ 1.407826@0] i2c-core: driver [mxc622x] using legacy suspend method
  425. [ 1.407833@0] i2c-core: driver [mxc622x] using legacy resume method
  426. [ 1.407839@0] mxc6255xc accelerometer driver: init
  427. [ 1.407868@0] i2c-core: driver [mxc6255xc] using legacy suspend method
  428. [ 1.407875@0] i2c-core: driver [mxc6255xc] using legacy resume method
  429. [ 1.407956@0] cm3217 v.1.0.0.1
  430. [ 1.407988@0] i2c-core: driver [elan_epl6814] using legacy suspend method
  431. [ 1.407995@0] i2c-core: driver [elan_epl6814] using legacy resume method
  432. [ 1.408025@0] i2c-core: driver [LTR501] using legacy suspend method
  433. [ 1.408031@0] i2c-core: driver [LTR501] using legacy resume method
  434. [ 1.408151@0] mmc driver version: 1.07, 2014-06-30: eMMC add hw reset function
  435. [ 1.409077@0] host->base fe108e00
  436. [ 1.409161@0] pdata->caps 78107
  437. [ 1.409168@0] pdata->caps2 0
  438. [ 1.409176@0] get property: port, value:0x00000004
  439. [ 1.409184@0] get property: ocr_avail, value:0x00200080
  440. [ 1.409191@0] get property: f_min, value:0x000493e0
  441. [ 1.409198@0] get property: f_max, value:0x05f5e100
  442. [ 1.409205@0] get property: max_req_size, value:0x00020000
  443. [ 1.409213@0] get property: irq_in, value:0x00000003
  444. [ 1.409220@0] get property: irq_out, value:0x00000005
  445. [ 1.409234@0] get property: gpio_cd, str:CARD_6
  446. [ 1.409243@0] get property: pinname, str:sd
  447. [ 1.409251@0] get property: card_type, value:0x00000005
  448. [ 1.409260@0] get property: gpio_dat3, str:CARD_4
  449. [ 1.409269@0] get property: gpio_volsw, str:GPIOAO_3
  450. [ 1.409444@0] aml_sd_voltage_switch[1309] : Switched to voltage -> 3.30 V
  451. [ 1.466312@0] sd: mmc_rescan_try_freq: trying to init card at 400000 Hz
  452. [ 1.512822@2] sd: SD Status: Invalid Allocation Unit size.
  453. [ 1.519201@2] sd: new high speed SDXC card at address aaaa, clock 50000000, 4-bit-bus-width
  454. [ 1.519607@2] mmcblk0: sd:aaaa SL64G 59.4 GiB
  455. [ 1.520908@2] mmcblk0: p1 p2
  456. [ 1.526300@0] [aml_sdhc_probe] aml_sdhc_probe() success!
  457. [ 1.526981@0] host->base fe108c20
  458. [ 1.527033@0] pdata->caps 80000507
  459. [ 1.527044@0] pdata->caps2 1
  460. [ 1.527052@0] get property: port, value:0x00000002
  461. [ 1.527059@0] get property: ocr_avail, value:0x00200000
  462. [ 1.527066@0] get property: f_min, value:0x000493e0
  463. [ 1.527073@0] get property: f_max, value:0x02faf080
  464. [ 1.527079@0] get property: f_max_w, value:0x02faf080
  465. [ 1.527087@0] get property: max_req_size, value:0x00020000
  466. [ 1.527099@0] get property: pinname, str:emmc
  467. [ 1.527107@0] get property: card_type, value:0x00000001
  468. [ 1.527118@0] get property: gpio_dat3, str:BOOT_3
  469. [ 1.527128@0] [is_emmc_exist] host->storage_flag=0, POR_BOOT_VALUE=1
  470. [ 1.546325@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
  471. [ 1.546621@3] Indeed it is in host mode hprt0 = 00001101
  472. [ 1.566312@2] emmc: mmc_rescan_try_freq: trying to init card at 400000 Hz
  473. [ 1.566321@2] aml_emmc_hw_reset 1379
  474. [ 1.626297@0] [aml_sdio_probe] aml_sdio_probe() success!
  475. [ 1.626396@0] [dsp]DSP start addr 0xc5e00000
  476. [ 1.626429@0] [dsp]register dsp to char divece(257)
  477. [ 1.627107@0] aml_rtc rtc.1: rtc core: registered aml_rtc as rtc0
  478. [ 1.628084@0] amlogic rfkill init
  479. [ 1.628177@0] Bluetooth: btwake_control_init Driver Ver 1.1
  480. [ 1.628541@0] aml_hw_crypto initialization.
  481. [ 1.629480@0] enter rt5616_modinit
  482. [ 1.629595@0] dummy_codec_platform_probe
  483. [ 1.630011@0] enter aml_i2s_dai_probe
  484. [ 1.630020@0] i2s get no clk src setting in dts, use the default mpll 0
  485. [ 1.630134@0] enter aml_pcm_dai_probe
  486. [ 1.630343@0] test codec dummy_codec
  487. [ 1.630351@0] using external codec, index = 1
  488. [ 1.630357@0] using external dummy codec
  489. [ 1.630461@0] enter spdif_dit_probe
  490. [ 1.630468@0] aml_spdif_unmute
  491. [ 1.630591@0] codec_name = dummy_codec.0
  492. [ 1.630997@0] enter aml_asoc_init
  493. [ 1.631035@0] spk_event delay_time = 130
  494. [ 1.631105@0] aml_snd_m8 aml_m8_sound_card.5: dummy_codec <-> aml-i2s-dai.0 mapping ok
  495. [ 1.632256@0] aml-i2s 0:playback preallocate_dma_buffer: area=f04fc000, addr=3ed00000, size=524288
  496. [ 1.632660@0] aml-i2s 1:capture preallocate_dma_buffer: area=f057e000, addr=3ec40000, size=65536
  497. [ 1.632692@0] aml_snd_m8 aml_m8_sound_card.5: dit-hifi <-> aml-spdif-dai.0 mapping ok
  498. [ 1.633641@0] -----ext_codec=1---
  499. [ 1.633649@0] aml_snd_m8: faild to get mute_gpio!
  500. [ 1.633656@0] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
  501. [ 1.633792@0] GACT probability NOT on
  502. [ 1.633805@0] Mirror/redirect action on
  503. [ 1.634376@0] NET: Registered protocol family 10
  504. [ 1.635077@0] mip6: Mobile IPv6
  505. [ 1.635087@0] sit: IPv6 over IPv4 tunneling driver
  506. [ 1.635973@0] NET: Registered protocol family 17
  507. [ 1.636002@0] NET: Registered protocol family 15
  508. [ 1.636077@0] Bridge firewalling registered
  509. [ 1.636212@0] Bluetooth: RFCOMM TTY layer initialized
  510. [ 1.636243@0] Bluetooth: RFCOMM socket layer initialized
  511. [ 1.636250@0] Bluetooth: RFCOMM ver 1.11
  512. [ 1.636258@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  513. [ 1.636293@0] Bluetooth: BNEP filters: protocol multicast
  514. [ 1.636309@0] Bluetooth: BNEP socket layer initialized
  515. [ 1.636316@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  516. [ 1.636328@0] Bluetooth: HIDP socket layer initialized
  517. [ 1.636354@0] NET: Registered protocol family 35
  518. [ 1.636841@0] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  519. [ 1.636870@0] Registering SWP/SWPB emulation handler
  520. [ 1.636878@0] enter meson_pm_init
  521. [ 1.637007@0] enter meson_pm_probe!
  522. [ 1.637026@0] hdmi: cec_pm: cec config:0xf
  523. [ 1.637032@0] meson_pm_probe done !
  524. [ 1.637081@0] AO cpu runs ok.
  525. [ 1.637596@0] registered taskstats version 1
  526. [ 1.637666@0] regulator-dummy: disabling
  527. [ 1.637914@0] Mali DRM initialize, driver name: mali_drm, version 2.1
  528. [ 1.638194@0] [drm] Initialized mali_drm 2.1.1 20140306 on minor 0
  529. [ 1.638219@0] Mali DRM initialize, driver name: mali_drm, version 2.1
  530. [ 1.638434@0] [drm] Initialized mali_drm 2.1.1 20140306 on minor 1
  531. [ 1.638664@0] aml_rtc rtc.1: setting system clock to 1970-01-01 00:00:00 UTC (0)
  532. [ 1.638691@0] ### dt-test ### No testcase data in device tree; not running tests
  533. [ 1.638792@0] meson_cpufreq_probe:SYSPLL request to be fixed
  534. [ 1.638799@0] meson_cpufreq: no voltage_control prop
  535. [ 1.638805@0] voltage_control = 0
  536. [ 1.639671@0] <<-GTP-INFO->> GTP driver installing...
  537. [ 1.639866@0] buf[0]=ec,buf[1]=af,err=4
  538. [ 1.639874@0] adc=383,TS_C=12,flag=1
  539. [ 1.639878@0] efuse_flag=a
  540. [ 1.639885@0] amlogic_thermal_probe, this chip is trimmed, use thermal
  541. [ 1.639893@0] amlogic-thermal aml_thermal: amlogic thermal probe start
  542. [ 1.639900@0] #thermal-cells=7
  543. [ 1.639905@0] pdata->temp_trip_count=4
  544. [ 1.639912@0] temperature=70 on trip point=0
  545. [ 1.639916@0] fixing high_freq=1488001 to 1488000 at trip point 0,level=3
  546. [ 1.639925@0] fixing low_freq=1488001 to 1488000 at trip point 0,level=3
  547. [ 1.639934@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
  548. [ 1.639938@0] cpu[0] core num==3
  549. [ 1.639943@0] gpu[0] core num==2
  550. [ 1.639947@0] temperature=80 on trip point=1
  551. [ 1.639951@0] fixing high_freq=1200001 to 1200000 at trip point 1,level=6
  552. [ 1.639958@0] fixing low_freq=1200001 to 1200000 at trip point 1,level=6
  553. [ 1.639966@0] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
  554. [ 1.639971@0] cpu[1] core num==2
  555. [ 1.639975@0] gpu[1] core num==2
  556. [ 1.639980@0] temperature=90 on trip point=2
  557. [ 1.639984@0] fixing high_freq=800001 to 696000 at trip point 2,level=11
  558. [ 1.639990@0] fixing low_freq=800001 to 696000 at trip point 2,level=11
  559. [ 1.639998@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
  560. [ 1.640003@0] cpu[2] core num==1
  561. [ 1.640007@0] gpu[2] core num==1
  562. [ 1.640012@0] temperature=110 on trip point=3
  563. [ 1.640016@0] fixing high_freq=-1 to -22 at trip point 3,level=-1
  564. [ 1.640022@0] fixing low_freq=-1 to -22 at trip point 3,level=-1
  565. [ 1.640030@0] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
  566. [ 1.640035@0] cpu[3] core num==-1
  567. [ 1.640039@0] gpu[3] core num==-1
  568. [ 1.640044@0] idle interval=1000
  569. [ 1.640049@0] pdata->name:aml_thermal
  570. [ 1.640305@0] tmp_trip[0].cpu_core_upper=1
  571. [ 1.640320@0] tmp_trip[1].cpu_core_upper=2
  572. [ 1.640332@0] tmp_trip[2].cpu_core_upper=3
  573. [ 1.640344@0] tmp_trip[3].cpu_core_upper=-1
  574. [ 1.640362@0] aml_thermal bind thermal-cpucore-0 okay !
  575. [ 1.640402@0] aml_thermal bind thermal-cpufreq-0 okay !
  576. [ 1.640410@0] pdata->tmp_trip[0].gpu_lower_level=1
  577. [ 1.640415@0] pdata->tmp_trip[0].gpu_upper_level=1
  578. [ 1.640428@0] pdata->tmp_trip[1].gpu_lower_level=2
  579. [ 1.640433@0] pdata->tmp_trip[1].gpu_upper_level=2
  580. [ 1.640445@0] pdata->tmp_trip[2].gpu_lower_level=4
  581. [ 1.640449@0] pdata->tmp_trip[2].gpu_upper_level=4
  582. [ 1.640462@0] pdata->tmp_trip[3].gpu_lower_level=-1
  583. [ 1.640466@0] pdata->tmp_trip[3].gpu_upper_level=-1
  584. [ 1.640479@0] aml_thermal bind thermal-gpufreq-0 okay !
  585. [ 1.640612@0] amlogic: Kernel Thermal management registered
  586. [ 1.640620@0] amlogic-thermal aml_thermal: amlogic thermal probe done
  587. [ 1.640687@0] hdmitx: cec: CEC init
  588. [ 1.640749@1] hdmitx: cec: CEC task process
  589. [ 1.640901@0] input: cec_input as /devices/virtual/input/input0
  590. [ 1.641038@0] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
  591. [ 1.641076@0] ALSA device list:
  592. [ 1.641083@0] #0: AML-M8AUDIO
  593. [ 1.644021@0] Freeing unused kernel memory: 2900K (c093d000 - c0c12000)
  594. [ 1.679128@0] tvmode set to 1080p
  595. [ 1.679128@0]
  596. [ 1.679147@0] don't set the same mode as current.
  597. [ 1.721798@0] tvmode set to 1080p
  598. [ 1.721798@0]
  599. [ 1.721816@0] don't set the same mode as current.
  600. [ 1.748262@3] hub 1-1:1.0: USB hub found
  601. [ 1.748574@3] hub 1-1:1.0: 4 ports detected
  602. [ 2.026670@3] usb 1-1.2: new high-speed USB device number 3 using dwc_otg
  603. [ 2.079593@1] force enable DISCARD here for ext4 fs
  604. [ 2.079612@1] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  605. [ 2.080198@1] force enable DISCARD here for ext4 fs
  606. [ 2.080209@1] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  607. [ 2.080748@1] force enable DISCARD here for ext4 fs
  608. [ 2.206588@3] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
  609. [ 2.255763@1] checked enable EXT4 DISCARD here
  610. [ 2.255777@1] EXT4-fs (mmcblk0p2): mounting with "discard" option, but the device does not support discard
  611. [ 2.255785@1] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  612. [ 2.676603@3] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
  613. [ 2.815826@0] systemd[1]: Inserted module 'autofs4'
  614. [ 2.827539@0] systemd[1]: systemd 219 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  615. [ 2.827769@0] systemd[1]: Detected architecture 'arm'.
  616. [ 2.828050@0] systemd[1]: Running with unpopulated /etc.
  617. [ 2.828240@0] systemd[1]: Set hostname to <Lakka>.
  618. [ 2.828605@0] systemd[1]: Initializing machine ID from random generator.
  619. [ 2.829299@0] systemd[1]: Populated /etc with preset unit settings.
  620. [ 2.833932@0] systemd[1]: Unit type .busname is not supported on this system.
  621. [ 2.882218@0] systemd[1]: Unit type .swap is not supported on this system.
  622. [ 2.898574@0] systemd[1]: Reached target Swap.
  623. [ 2.898638@0] systemd[1]: Starting Swap.
  624. [ 2.898875@0] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  625. [ 2.898927@0] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  626. [ 2.899136@0] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  627. [ 2.899186@0] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  628. [ 2.899254@0] systemd[1]: Reached target Paths.
  629. [ 2.899298@0] systemd[1]: Starting Paths.
  630. [ 2.899809@0] systemd[1]: Created slice Root Slice.
  631. [ 2.899863@0] systemd[1]: Starting Root Slice.
  632. [ 2.900075@0] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  633. [ 2.900124@0] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  634. [ 2.900284@0] systemd[1]: Listening on Delayed Shutdown Socket.
  635. [ 2.900332@0] systemd[1]: Starting Delayed Shutdown Socket.
  636. [ 2.900505@0] systemd[1]: Listening on Journal Socket (/dev/log).
  637. [ 2.900553@0] systemd[1]: Starting Journal Socket (/dev/log).
  638. [ 2.900715@0] systemd[1]: Listening on udev Control Socket.
  639. [ 2.900762@0] systemd[1]: Starting udev Control Socket.
  640. [ 2.901160@0] systemd[1]: Created slice System Slice.
  641. [ 2.901223@0] systemd[1]: Starting System Slice.
  642. [ 2.901556@0] systemd[1]: Created slice User and Session Slice.
  643. [ 2.901604@0] systemd[1]: Starting User and Session Slice.
  644. [ 2.901669@0] systemd[1]: Reached target Slices.
  645. [ 2.901714@0] systemd[1]: Starting Slices.
  646. [ 2.901922@0] systemd[1]: Listening on Journal Socket.
  647. [ 2.901985@0] systemd[1]: Starting Journal Socket.
  648. [ 2.904258@0] systemd[1]: Starting Remount Root and Kernel File Systems...
  649. [ 2.906397@0] systemd[1]: Mounting POSIX Message Queue File System...
  650. [ 2.908837@0] systemd[1]: Mounting Temporary Directory...
  651. [ 2.911114@0] systemd[1]: Starting Setup machine-id...
  652. [ 2.913737@0] systemd[1]: Starting Show Version...
  653. [ 2.914322@0] systemd[1]: Mounted Huge Pages File System.
  654. [ 2.945487@0] systemd[1]: Starting Load Kernel Modules...
  655. [ 2.945849@0] systemd[1]: Listening on udev Kernel Socket.
  656. [ 2.945941@0] systemd[1]: Starting udev Kernel Socket.
  657. [ 2.948328@0] systemd[1]: Starting udev Coldplug all Devices...
  658. [ 2.948673@0] systemd[1]: Listening on Journal Audit Socket.
  659. [ 2.948737@0] systemd[1]: Starting Journal Audit Socket.
  660. [ 2.950961@0] systemd[1]: Starting Set ondemand threshold...
  661. [ 2.953448@0] systemd[1]: Mounting Variable Directory...
  662. [ 2.965011@0] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  663. [ 2.965677@0] systemd[1]: Started Debug Shell.
  664. [ 2.967819@0] systemd[1]: Mounting Debug File System...
  665. [ 2.971906@0] systemd[1]: Started Remount Root and Kernel File Systems.
  666. [ 3.074953@1] systemd[1]: Started Rebuild Hardware Database.
  667. [ 3.076507@1] systemd[1]: Started Load Kernel Modules.
  668. [ 3.077000@1] systemd[1]: Mounted FUSE Control File System.
  669. [ 3.079496@1] systemd[1]: Mounting Configuration File System...
  670. [ 3.081981@1] systemd[1]: Starting Apply Kernel Variables...
  671. [ 3.090899@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
  672. [ 3.094573@1] systemd[1]: Starting Create Static Device Nodes in /dev...
  673. [ 3.111097@1] systemd[1]: Mounted POSIX Message Queue File System.
  674. [ 3.111409@1] systemd[1]: Mounted Variable Directory.
  675. [ 3.111580@1] systemd[1]: Mounted Temporary Directory.
  676. [ 3.114348@1] systemd[1]: Started Set ondemand threshold.
  677. [ 3.124773@2] systemd[1]: Started Show Version.
  678. [ 3.138092@2] systemd[1]: Mounted Debug File System.
  679. [ 3.138473@2] systemd[1]: Mounted Configuration File System.
  680. [ 3.154388@2] systemd[1]: Started Create Static Device Nodes in /dev.
  681. [ 3.155975@2] systemd[1]: Started Apply Kernel Variables.
  682. [ 3.160881@2] systemd[1]: Started Setup machine-id.
  683. [ 3.275279@2] systemd[1]: Started udev Coldplug all Devices.
  684. [ 3.310969@2] systemd[1]: Starting Journal Service...
  685. [ 3.311148@2] systemd[1]: Reached target Local File Systems (Pre).
  686. [ 3.311246@2] systemd[1]: Starting Local File Systems (Pre).
  687. [ 3.311346@2] systemd[1]: Reached target Local File Systems.
  688. [ 3.311410@2] systemd[1]: Starting Local File Systems.
  689. [ 3.311532@2] systemd[1]: Started Rebuild Journal Catalog.
  690. [ 3.311918@2] systemd[1]: Started Debug /var/log relink.
  691. [ 3.313931@2] systemd[1]: Starting Setup Timezone data...
  692. [ 3.334962@3] systemd[1]: Started Setup Timezone data.
  693. [ 3.410807@3] systemd[1]: Started Journal Service.
  694. [ 3.446494@2] systemd-journald[186]: Received request to flush runtime journal from PID 1
  695. [ 4.286176@2] sony 0003:054C:0268.0001: Fixing up Sony Sixaxis report descriptor
  696. [ 4.500338@2] input: Sony PLAYSTATION(R)3 Controller as /devices/lm1/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
  697. [ 4.502798@2] sony 0003:054C:0268.0001: input,hiddev0,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-lm1-1.3/input0
  698. [ 4.556192@1] Driver for 1-wire Dallas network protocol.
  699. [ 4.584974@3] sony 0003:054C:0268.0002: Fixing up Sony Sixaxis report descriptor
  700. [ 4.650380@2] The PHY does not support set_wol, was CONFIG_MICREL_PHY enabled?
  701. [ 4.802524@3] input: Sony PLAYSTATION(R)3 Controller as /devices/lm1/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
  702. [ 4.803262@3] sony 0003:054C:0268.0002: input,hiddev0,hidraw1: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-lm1-1.4/input0
  703. [ 5.154262@3] usbcore: registered new interface driver rtl8192cu
  704. [ 5.265332@1] netdev_open
  705. [ 5.265347@1] Ethernet reset
  706. [ 5.265382@1] NET MDA descpter start addr=ed700000
  707. [ 5.374557@1] phy_interface = 0
  708. [ 5.374571@1] aml_phy_init: trying to attach to 0:01
  709. [ 5.374742@1] am_rtl811f called phy reset
  710. [ 5.386433@1] --1--write mac add to:eea87188: 00 1e 06 00 8c cb |.....|
  711. [ 5.386461@1] --2--write mac add to:eea87188: 00 1e 06 00 8c cb |.....|
  712. [ 5.386478@1] write mac add to:eea87188: 00 1e 06 00 8c cb |.....|
  713. [ 5.386497@1] Current DMA mode=0, set mode=621c100
  714. [ 5.386548@1] eth0: opened (irq 40).
  715. [ 5.397257@1] ether leave promiscuous mode
  716. [ 5.397276@1] ether leave all muticast mode
  717. [ 5.397363@1] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  718. [ 5.429065@0] ionvideo open
  719. [ 5.429265@0] ionvideo_stop_generating!!!!
  720. [ 5.429294@0] ionvideo release
  721. [ 5.567407@1] emmc: mmc_rescan_try_freq: trying to init card at 300000 Hz
  722. [ 5.606331@1] aml_emmc_hw_reset 1379
  723. [ 6.902290@3] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  724. [ 8.555356@2] ----aml_hw_iec958_init,runtime->rate=48000--
  725. [ 8.555368@2] audio_set_958_clk, freq=4,
  726. [ 8.555375@2] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
  727. [ 8.555382@2] iec958 mode PCM16
  728. [ 8.555389@2] IEC958 16bit
  729. [ 8.555396@2] hdmitx: audio: aout notify rate 48000
  730. [ 8.555401@2] hdmitx: audio: aout notify size 16
  731. [ 8.555406@2] hdmitx: audio: aout notify format CT_PCM
  732. [ 8.555412@2] hdmitx: audio: audio channel num is 1
  733. [ 8.555420@2] hdmitx: audio: SPDIF
  734. [ 8.555432@2] hdmitx: audio: current VIC: 16
  735. [ 8.555437@2] hdmitx: audio: audio sample rate: 3
  736. [ 8.555441@2] hdmitx: audio: reset audio N para
  737. [ 8.555452@2] hdmitx: audio: PCM out to HDMI
  738. [ 8.566781@2] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  739. [ 8.566792@2] hdmitx: audio: i2s_to_spdif_flag:1
  740. [ 8.566797@2] hdmitx: audio: Enable audio spdif to HDMI
  741. [ 8.566805@2] hdmitx: audio: Audio Type: PCM
  742. [ 8.566847@2] hdmitx: audio: set audio param
  743. [ 9.215600@3] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  744. [ 9.386419@1] [adjust link] -> eth: full-duplex
  745. [ 9.386434@1] [adjust link] -> eth: phy_speed <> priv_speed)
  746. [ 9.386448@1] [adjust link -> eth: am_adjust_link state change (new_state=true)
  747. [ 9.386455@1] libphy: 0:01 - Link is Up - 1000/Full
  748. [ 9.386502@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  749. [ 36.496890@2] ----aml_hw_iec958_init,runtime->rate=48000--
  750. [ 36.496902@2] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
  751. [ 36.496909@2] iec958 mode PCM16
  752. [ 36.496916@2] IEC958 16bit
  753. [ 36.496923@2] hdmitx: audio: aout notify rate 48000
  754. [ 36.496929@2] hdmitx: audio: aout notify size 16
  755. [ 36.496935@2] hdmitx: audio: audio channel num is 1
  756. [ 36.496943@2] hdmitx: audio: SPDIF
  757. [ 36.496955@2] hdmitx: audio: current VIC: 16
  758. [ 36.496960@2] hdmitx: audio: audio sample rate: 3
  759. [ 36.496965@2] hdmitx: audio: reset audio N para
  760. [ 36.496976@2] hdmitx: audio: PCM out to HDMI
  761. [ 36.508370@2] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  762. [ 36.508380@2] hdmitx: audio: i2s_to_spdif_flag:1
  763. [ 36.508385@2] hdmitx: audio: Enable audio spdif to HDMI
  764. [ 36.508393@2] hdmitx: audio: Audio Type: PCM
  765. [ 36.508435@2] hdmitx: audio: set audio param
  766. [ 1454.681706@2] ----aml_hw_iec958_init,runtime->rate=48000--
  767. [ 1454.681718@2] ----aml_hw_iec958_init,runtime->rate=48000,sample_rate=4--
  768. [ 1454.681725@2] iec958 mode PCM16
  769. [ 1454.681733@2] IEC958 16bit
  770. [ 1454.681740@2] hdmitx: audio: aout notify rate 48000
  771. [ 1454.681745@2] hdmitx: audio: aout notify size 16
  772. [ 1454.681752@2] hdmitx: audio: audio channel num is 1
  773. [ 1454.681761@2] hdmitx: audio: SPDIF
  774. [ 1454.681773@2] hdmitx: audio: current VIC: 16
  775. [ 1454.681778@2] hdmitx: audio: audio sample rate: 3
  776. [ 1454.681783@2] hdmitx: audio: reset audio N para
  777. [ 1454.681794@2] hdmitx: audio: PCM out to HDMI
  778. [ 1454.693191@2] hdmitx: audio: Time out: AIU_HDMI_CLK_DATA_CTRL
  779. [ 1454.693201@2] hdmitx: audio: i2s_to_spdif_flag:1
  780. [ 1454.693206@2] hdmitx: audio: Enable audio spdif to HDMI
  781. [ 1454.693214@2] hdmitx: audio: Audio Type: PCM
  782. [ 1454.693256@2] hdmitx: audio: set audio param
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!