Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build)
- Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar SE Serial ATA family
- Device Model: WDC WD2500JS-00MHB1
- Serial Number: WD-WCANK2118181
- Firmware Version: 10.02E01
- User Capacity: 250 058 268 160 bytes
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 7
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Sun Jan 30 23:45:16 2011 YEKT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (7680) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 90) minutes.
- Conveyance self-test routine
- recommended polling time: ( 6) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0003 221 182 021 Pre-fail Always - 3950
- 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3406
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 17811
- 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3360
- 190 Airflow_Temperature_Cel 0x0022 044 005 045 Old_age Always FAILING_NOW 56
- 194 Temperature_Celsius 0x0022 094 055 000 Old_age Always - 56
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
- 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 1
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 2457
- 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 6 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 6 occurred at disk power-on lifetime: 17778 hours (740 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 6d 94 29 e3 Error: UNC at LBA = 0x0329946d = 53056621
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 38 49 94 29 03 00 00:00:18.019 READ DMA
- 27 00 00 00 00 00 00 00 00:00:18.019 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00:00:18.018 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 00:00:18.018 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00:00:18.018 READ NATIVE MAX ADDRESS EXT
- Error 5 occurred at disk power-on lifetime: 17778 hours (740 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 6d 94 29 e3 Error: UNC at LBA = 0x0329946d = 53056621
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 38 49 94 29 03 00 00:00:16.036 READ DMA
- 27 00 00 00 00 00 00 00 00:00:16.036 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00:00:16.035 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 00:00:16.035 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00:00:16.035 READ NATIVE MAX ADDRESS EXT
- Error 4 occurred at disk power-on lifetime: 17778 hours (740 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 6d 94 29 e3 Error: UNC at LBA = 0x0329946d = 53056621
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 38 49 94 29 03 00 00:00:14.064 READ DMA
- 27 00 00 00 00 00 00 00 00:00:14.064 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00:00:14.063 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 00:00:14.063 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00:00:14.063 READ NATIVE MAX ADDRESS EXT
- Error 3 occurred at disk power-on lifetime: 17778 hours (740 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 6d 94 29 e3 Error: UNC at LBA = 0x0329946d = 53056621
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 38 49 94 29 03 00 00:00:12.087 READ DMA
- 27 00 00 00 00 00 00 00 00:00:12.087 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00:00:12.086 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 00:00:12.086 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00:00:12.086 READ NATIVE MAX ADDRESS EXT
- Error 2 occurred at disk power-on lifetime: 17778 hours (740 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 6d 94 29 e3 Error: UNC at LBA = 0x0329946d = 53056621
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 38 49 94 29 03 00 00:00:10.109 READ DMA
- 27 00 00 00 00 00 00 00 00:00:10.109 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00:00:10.108 IDENTIFY DEVICE
- ef 03 46 00 00 00 00 00 00:00:10.108 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00:00:10.086 READ NATIVE MAX ADDRESS EXT
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement