API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Aug 8th, 2013
89
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.09 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2013.07-00072-g9fab4bf-dirty (Jul 28 2013 - 10:20:03)
  2.  
  3. OMAP3630/3730-GP ES1.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  4. OMAP3 Beagle board + LPDDR/NAND
  5. I2C: ready
  6. DRAM: 512 MiB
  7. NAND: 256 MiB
  8. MMC: OMAP SD/MMC: 0
  9. *** Warning - bad CRC, using default environment
  10.  
  11. In: serial
  12. Out: serial
  13. Err: serial
  14. Beagle xM Rev A
  15. No EEPROM on expansion board
  16. No EEPROM on expansion board
  17. Die ID #716200011ff00000015739eb0c013009
  18. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  19. musb-hdrc: MHDRC RTL version 1.800
  20. musb-hdrc: setup fifo_mode 4
  21. musb-hdrc: 28/31 max ep, 16384/16384 memory
  22. USB Peripheral mode controller at 480ab000 using PIO, IRQ 0
  23. Net: usb_ether
  24. Hit any key to stop autoboot: 0
  25. mmc0 is current device
  26. gpio: pin 173 (gpio 173) value is 0
  27. gpio: pin 4 (gpio 4) value is 0
  28. SD/MMC found on device 0
  29. reading uEnv.txt
  30. 934 bytes read in 3 ms (303.7 KiB/s)
  31. Importing environment from mmc ...
  32. Checking if uenvcmd is set ...
  33. Running uenvcmd ...
  34. reading zImage
  35. 3790144 bytes read in 320 ms (11.3 MiB/s)
  36. reading /dtbs/omap3-beagle-xm-ab.dtb
  37. 13937 bytes read in 12 ms (1.1 MiB/s)
  38. Booting from mmc ...
  39. Kernel image @ 0x80200000 [ 0x000000 - 0x39d540 ]
  40. ## Flattened Device Tree blob at 80f80000
  41. Booting using the fdt blob at 0x80f80000
  42. Using Device Tree in place at 80f80000, end 80f86670
  43.  
  44. Starting kernel ...
  45.  
  46. [ 0.000000] Booting Linux on physical CPU 0x0
  47. [ 0.000000] Initializing cgroup subsys cpuset
  48. [ 0.000000] Initializing cgroup subsys cpu
  49. [ 0.000000] Initializing cgroup subsys cpuacct
  50. [ 0.000000] Linux version 3.11.0-rc4-armv7-x6 (kevin@kt1) (gcc version 4.8.2 20130624 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.07-1 - Linaro GCC 2013.07) ) #1 SMP Wed3
  51. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  52. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  53. [ 0.000000] Machine: Generic OMAP3-GP (Flattened Device Tree), model: TI OMAP3 BeagleBoard xM
  54. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  55. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  56. [ 0.000000] OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk )
  57. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c138f000 s14144 r8192 d14528 u36864
  58. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  59. [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=none buddy2=none camera=none wl12xx_clk=none vram=12M omapfb.mode=dvi:1280x720MR-16@60 omapdss.def_dc
  60. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  61. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  62. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  63. [ 0.000000] allocated 1048576 bytes of page_cgroup
  64. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  65. [ 0.000000] Memory: 505408K/523264K available (7229K kernel code, 628K rwdata, 2852K rodata, 469K init, 1013K bss, 17856K reserved, 0K highmem)
  66. [ 0.000000] Virtual kernel memory layout:
  67. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  68. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  69. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  70. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  71. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  72. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  73. [ 0.000000] .text : 0xc0008000 - 0xc09e0790 (10082 kB)
  74. [ 0.000000] .init : 0xc09e1000 - 0xc0a56740 ( 470 kB)
  75. [ 0.000000] .data : 0xc0a58000 - 0xc0af50a0 ( 629 kB)
  76. [ 0.000000] .bss : 0xc0af50a0 - 0xc0bf27f8 (1014 kB)
  77. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  78. [ 0.000000] Hierarchical RCU implementation.
  79. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  80. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  81. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  82. [ 0.000000] Total of 96 interrupts on 1 active controller
  83. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  84. [ 0.000000] OMAP clockevent source: timer12 at 32768 Hz
  85. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  86. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  87. [ 0.000000] Console: colour dummy device 80x30
  88. [ 0.000274] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
  89. [ 0.042724] pid_max: default: 32768 minimum: 301
  90. [ 0.042877] Security Framework initialized
  91. [ 0.042938] AppArmor: AppArmor initialized
  92. [ 0.043182] Mount-cache hash table entries: 512
  93. [ 0.048278] Initializing cgroup subsys memory
  94. [ 0.048339] Initializing cgroup subsys devices
  95. [ 0.048339] Initializing cgroup subsys freezer
  96. [ 0.048370] Initializing cgroup subsys net_cls
  97. [ 0.048370] Initializing cgroup subsys blkio
  98. [ 0.048370] Initializing cgroup subsys perf_event
  99. [ 0.048492] CPU: Testing write buffer coherency: ok
  100. [ 0.048950] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  101. [ 0.049011] Setting up static identity map for 0xc06d4f50 - 0xc06d4fa8
  102. [ 0.050170] Brought up 1 CPUs
  103. [ 0.050201] SMP: Total of 1 processors activated (339.14 BogoMIPS).
  104. [ 0.050201] CPU: All CPU(s) started in SVC mode.
  105. [ 0.051086] devtmpfs: initialized
  106. [ 0.115509] xor: measuring software checksum speed
  107. [ 0.198822] arm4regs : 649.200 MB/sec
  108. [ 0.285675] 8regs : 478.400 MB/sec
  109. [ 0.372497] 32regs : 559.600 MB/sec
  110. [ 0.372528] xor: using function: arm4regs (649.200 MB/sec)
  111. [ 0.372528] pinctrl core: initialized pinctrl subsystem
  112. [ 0.373168] regulator-dummy: no parameters
  113. [ 0.373626] NET: Registered protocol family 16
  114. [ 0.374572] DMA: preallocated 256 KiB pool for atomic coherent allocations
  115. [ 0.382110] Reprogramming SDRC clock to 400000000 Hz
  116. [ 0.384063] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@0x48002a00/pinmux_gpio1_pins, deferring probe
  117. [ 0.384094] platform 48310000.gpio: Driver omap_gpio requests probe deferral
  118. [ 0.385101] OMAP GPIO hardware version 2.5
  119. [ 0.391876] platform 49022000.mcbsp: alias fck already exists
  120. [ 0.392303] platform 49024000.mcbsp: alias fck already exists
  121. [ 0.396026] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
  122. [ 0.398803] No ATAGs?
  123. [ 0.398803] hw-breakpoint: debug architecture 0x4 unsupported.
  124. [ 0.400421] OMAP DMA hardware revision 5.0
  125. [ 0.415649] bio: create slab <bio-0> at 0
  126. [ 0.564147] raid6: int32x1 82 MB/s
  127. [ 0.711090] raid6: int32x2 112 MB/s
  128. [ 0.859191] raid6: int32x4 85 MB/s
  129. [ 1.006744] raid6: int32x8 89 MB/s
  130. [ 1.006774] raid6: using algorithm int32x2 (112 MB/s)
  131. [ 1.006774] raid6: using intx1 recovery algorithm
  132. [ 1.007812] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
  133. [ 1.007873] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
  134. [ 1.022918] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
  135. [ 1.023803] hsusb2_reset: 3300 mV
  136. [ 1.024017] platform hsusb2_power_reg.25: Driver reg-fixed-voltage requests probe deferral
  137. [ 1.027191] SCSI subsystem initialized
  138. [ 1.028106] usbcore: registered new interface driver usbfs
  139. [ 1.028198] usbcore: registered new interface driver hub
  140. [ 1.028411] usbcore: registered new device driver usb
  141. [ 1.030273] omap_i2c i2c.10: did not get pins for i2c error: -19
  142. [ 1.030853] omap_i2c i2c.10: bus 0 rev4.4 at 2600 kHz
  143. [ 1.031799] omap_i2c i2c.11: did not get pins for i2c error: -19
  144. [ 1.032348] omap_i2c i2c.11: bus 1 rev4.4 at 400 kHz
  145. [ 1.032470] omap_i2c i2c.12: did not get pins for i2c error: -19
  146. [ 1.032897] omap_i2c i2c.12: bus 2 rev4.4 at 100 kHz
  147. [ 1.033691] media: Linux media interface: v0.10
  148. [ 1.033782] Linux video capture interface: v2.00
  149. [ 1.033905] pps_core: LinuxPPS API ver. 1 registered
  150. [ 1.033935] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  151. [ 1.033966] PTP clock support registered
  152. [ 1.034057] EDAC MC: Ver: 3.0.0
  153. [ 1.034942] omap-iommu omap-iommu.0: mmu_isp registered
  154. [ 1.035400] Advanced Linux Sound Architecture Driver Initialized.
  155. [ 1.036407] NetLabel: Initializing
  156. [ 1.036437] NetLabel: domain hash size = 128
  157. [ 1.036437] NetLabel: protocols = UNLABELED CIPSOv4
  158. [ 1.036529] NetLabel: unlabeled traffic allowed by default
  159. [ 1.037139] Switched to clocksource 32k_counter
  160. [ 1.062622] AppArmor: AppArmor Filesystem Enabled
  161. [ 1.076232] NET: Registered protocol family 2
  162. [ 1.077178] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  163. [ 1.077362] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  164. [ 1.077453] TCP: Hash tables configured (established 4096 bind 4096)
  165. [ 1.077545] TCP: reno registered
  166. [ 1.077545] UDP hash table entries: 256 (order: 1, 8192 bytes)
  167. [ 1.077575] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  168. [ 1.078002] NET: Registered protocol family 1
  169. [ 1.078521] RPC: Registered named UNIX socket transport module.
  170. [ 1.078552] RPC: Registered udp transport module.
  171. [ 1.078552] RPC: Registered tcp transport module.
  172. [ 1.078552] RPC: Registered tcp NFSv4.1 backchannel transport module.
  173. [ 1.079498] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  174. [ 1.082733] audit: initializing netlink socket (disabled)
  175. [ 1.082794] type=2000 audit(1.230:1): initialized
  176. [ 1.408996] VFS: Disk quotas dquot_6.5.2
  177. [ 1.409393] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  178. [ 1.412872] NFS: Registering the id_resolver key type
  179. [ 1.412963] Key type id_resolver registered
  180. [ 1.412963] Key type id_legacy registered
  181. [ 1.413024] fuse init (API version 7.22)
  182. [ 1.414245] bio: create slab <bio-1> at 1
  183. [ 1.415710] Btrfs loaded
  184. [ 1.416076] msgmni has been set to 987
  185. [ 1.418151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  186. [ 1.418334] io scheduler noop registered
  187. [ 1.418334] io scheduler deadline registered
  188. [ 1.418548] io scheduler cfq registered (default)
  189. [ 1.421539] pinctrl-single-omap 48002030.pinmux: 742 pins at pa fa002030 size 1484
  190. [ 1.421966] pinctrl-single-omap 48002a00.pinmux: 46 pins at pa fa002a00 size 92
  191. [ 1.424224] OMAP DSS rev 2.0
  192. [ 1.424743] omapdss supply vdds_dsi not found, using dummy regulator
  193. [ 1.426635] abb: 1012 <--> 1380 mV
  194. [ 1.508911] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  195. [ 1.510803] Serial: IMX driver
  196. [ 1.511657] omap_uart serial.7: did not get pins for uart0 error: -19
  197. [ 1.512084] serial.7: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
  198. [ 1.512542] omap_uart serial.8: did not get pins for uart1 error: -19
  199. [ 1.512847] serial.8: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
  200. [ 1.513641] serial.9: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
  201. [ 2.414245] console [ttyO2] enabled
  202. [ 2.418609] omap_uart serial.19: did not get pins for uart3 error: -19
  203. [ 2.425750] serial.19: ttyO3 at MMIO 0x49042000 (irq = 96) is a OMAP UART3
  204. [ 2.433502] serial: Freescale lpuart driver
  205. [ 2.438415] [drm] Initialized drm 1.1.0 20060810
  206. [ 2.443359] usbcore: registered new interface driver udl
  207. [ 2.455688] twl 0-0048: PIH (irq 23) chaining IRQs 306..314
  208. [ 2.461730] twl 0-0048: power (irq 311) chaining IRQs 314..321
  209. [ 2.470153] VDD1: 600 <--> 1450 mV at 1012 mV
  210. [ 2.476318] VDAC: 1800 mV
  211. [ 2.480682] VPLL2: 1800 mV
  212. [ 2.484710] VMMC1: 1850 <--> 3150 mV at 3150 mV
  213. [ 2.490631] VMMC2: 1850 <--> 3150 mV at 2600 mV
  214. [ 2.496368] VUSB1V5: 1500 mV
  215. [ 2.500183] VUSB1V8: 1800 mV
  216. [ 2.503875] VUSB3V1: 3100 mV
  217. [ 2.507873] VSIM: 1800 <--> 3000 mV at 1800 mV
  218. [ 2.513580] twl4030_gpio gpio.39: gpio (irq 306) chaining IRQs 322..339
  219. [ 2.523559] twl4030_usb twl4030-usb.40: Initialized TWL4030 USB module
  220. [ 2.541198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  221. [ 2.548156] ehci-omap: OMAP-EHCI Host Controller driver
  222. [ 2.553955] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
  223. [ 2.561248] platform 48064800.ehci: Driver ehci-omap requests probe deferral
  224. [ 2.568786] usbcore: registered new interface driver usb-storage
  225. [ 2.582031] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  226. [ 2.588409] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
  227. [ 2.596771] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  228. [ 2.603942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  229. [ 2.611541] usb usb1: Product: MUSB HDRC host driver
  230. [ 2.616760] usb usb1: Manufacturer: Linux 3.11.0-rc4-armv7-x6 musb-hcd
  231. [ 2.623626] usb usb1: SerialNumber: musb-hdrc.0.auto
  232. [ 2.629638] hub 1-0:1.0: USB hub found
  233. [ 2.633575] hub 1-0:1.0: 1 port detected
  234. [ 2.639831] mousedev: PS/2 mouse device common for all mice
  235. [ 2.647125] Driver for 1-wire Dallas network protocol.
  236. [ 2.654235] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  237. [ 2.663116] cpuidle: using governor ladder
  238. [ 2.667480] cpuidle: using governor menu
  239. [ 2.671630] sdhci: Secure Digital Host Controller Interface driver
  240. [ 2.678161] sdhci: Copyright(c) Pierre Ossman
  241. [ 2.683471] omap-dma-engine 48056000.dma-controller: allocating channel for 62
  242. [ 2.691131] omap-dma-engine 48056000.dma-controller: allocating channel for 61
  243. [ 2.701812] omap_hsmmc mmc.17: pins are not configured from the driver
  244. [ 2.747589] sdhci-pltfm: SDHCI platform and OF driver helper
  245. [ 2.754089] ledtrig-cpu: registered to indicate activity on CPUs
  246. [ 2.761108] hidraw: raw HID events driver (C) Jiri Kosina
  247. [ 2.767425] usbcore: registered new interface driver usbhid
  248. [ 2.773284] usbhid: USB HID core driver
  249. [ 2.778137] ashmem: initialized
  250. [ 2.783111] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  251. [ 2.790161] [drm] No driver support for vblank timestamp query.
  252. [ 2.796386] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0
  253. [ 2.864746] mmc0: host does not support reading read-only switch. assuming write-enable.
  254. [ 2.876068] mmc0: new high speed SDHC card at address e808
  255. [ 2.882690] mmcblk0: mmc0:e808 SU04G 3.69 GiB
  256. [ 2.894775] mmcblk0: p1 p2
  257. [ 2.903137] omap-twl4030 sound.22: twl4030-hifi <-> 49022000.mcbsp mapping ok
  258. [ 2.913299] oprofile: using arm/armv7
  259. [ 2.917419] drop_monitor: Initializing network drop monitor service
  260. [ 2.924407] TCP: cubic registered
  261. [ 2.928558] NET: Registered protocol family 10
  262. [ 2.934204] mip6: Mobile IPv6
  263. [ 2.937377] NET: Registered protocol family 17
  264. [ 2.942199] Key type dns_resolver registered
  265. [ 2.947235] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  266. [ 2.957519] ThumbEE CPU extension supported.
  267. [ 2.962005] Registering SWP/SWPB emulation handler
  268. [ 2.967041] SmartReflex Class3 initialized
  269. [ 2.971954] registered taskstats version 1
  270. [ 2.976562] VPLL2: disabling
  271. [ 2.980712] VDAC: disabling
  272. [ 2.985260] omapdrm omapdrm.0: DMM not available, disable DMM support
  273. [ 2.992614] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  274. [ 2.999603] [drm] No driver support for vblank timestamp query.
  275. [ 3.058837] Console: switching to colour frame buffer device 160x64
  276. [ 3.082763] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
  277. [ 3.088989] omapdrm omapdrm.0: registered panic notifier
  278. [ 3.094573] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1
  279. [ 3.105804] hsusb2_vbus: 3300 mV
  280. [ 3.109802] ehci-omap 48064800.ehci: Can't get PHY device for port 1: -517
  281. [ 3.117065] platform 48064800.ehci: Driver ehci-omap requests probe deferral
  282. [ 3.124999] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  283. [ 3.131652] sr_init: No PMIC hook to init smartreflex
  284. [ 3.137084] sr_init: platform driver register failed for SR
  285. [ 3.143005] imx-drm imx-drm: No connectors reported connected with modes
  286. [ 3.150085] [drm] Cannot find any crtc or sizes - going 1024x768
  287. [ 3.159637] imx-drm imx-drm: fb1: frame buffer device
  288. [ 3.165374] ALSA device list:
  289. [ 3.168548] #0: omap3beagle
  290. [ 3.182647] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  291. [ 3.190399] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  292. [ 3.460754] EXT4-fs (mmcblk0p2): recovery complete
  293. [ 3.469787] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  294. [ 3.478393] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  295. [ 3.512390] devtmpfs: mounted
  296. [ 3.516510] Freeing unused kernel memory: 468K (c09e1000 - c0a56000)
  297. [ 4.563568] init: ureadahead main process (64) terminated with status 5
  298. [ 4.735321] init: mounted-proc main process (73) terminated with status 1
  299. fsck from util-linux 2.20.1
  300. rootfs: clean, 27461/239040 files, 164556/955392 blocks
  301. [ OK ]ding cpufreq kernel modules...
  302. [ OK ]Freq Utilities: Setting ondemand CPUFreq governor... * CPU0...
  303. [ OK ]rting web server apache2
  304.  
  305. Ubuntu 13.04 beagle ttyO2
  306.  
  307. beagle login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!