Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2016.03-rc2-armbian (Feb 19 2016 - 16:47:04)
- DRAM: 512 MiB
- Trying to boot from MMC
- U-Boot 2016.03-rc2-armbian (Feb 19 2016 - 16:47:04 -0500) Allwinner Technology
- CPU: Allwinner H3 (SUN8I)
- I2C: ready
- DRAM: 512 MiB
- MMC: SUNXI SD/MMC: 0
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: No ethernet found.
- starting USB...
- No controllers found
- Hit any key to stop autoboot: 2 1 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 2139 bytes read in 302 ms (6.8 KiB/s)
- ## Executing script at 43100000
- gpio: pin PA15 (gpio 15) value is 1
- ** File not found /boot/.next **
- ** Unrecognized filesystem type **
- ** File not found .next **
- 35512 bytes read in 709 ms (48.8 KiB/s)
- 4768728 bytes read in 5138 ms (906.3 KiB/s)
- Kernel image @ 0x48000000 [ 0x000000 - 0x48c3d8 ]
- Using machid 0x1029 from environment
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 512MB
- ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
- ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.110-sun8i (root@makearmbian) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #8 SMP PREEMPT Fri Feb 19 16:49:17 EST 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: CMA: reserved 160 MiB at 56000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 131072
- [ 0.000000] free_area_init_node: node 0, pgdat c09bfcc0, node_mem_map c0a9e000
- [ 0.000000] Normal zone: 1152 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 129920 pages, LIFO batch:31
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0f30000 s11904 r8192 d12672 u32768
- [ 0.000000] pcpu-alloc: s11904 r8192 d12672 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup-enable=memory swapaccount=1 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 panic=10 consoleblank=0 enforcing=0 loglevel=8
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 1048576 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 512MB = 512MB total
- [ 0.000000] Memory: 342764k/342764k available, 181524k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc08fd77c (9174 kB)
- [ 0.000000] .init : 0xc08fe000 - 0xc094ae80 ( 308 kB)
- [ 0.000000] .data : 0xc094c000 - 0xc09c4b10 ( 483 kB)
- [ 0.000000] .bss : 0xc09c52c4 - 0xc0a9d2d8 ( 865 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Additional per-CPU info printed with stalls.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000199] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.000224] pid_max: default: 32768 minimum: 301
- [ 0.000573] Mount-cache hash table entries: 512
- [ 0.001596] Initializing cgroup subsys cpuacct
- [ 0.001614] Initializing cgroup subsys memory
- [ 0.001662] Initializing cgroup subsys devices
- [ 0.001676] Initializing cgroup subsys freezer
- [ 0.001687] Initializing cgroup subsys blkio
- [ 0.001712] Initializing cgroup subsys perf_event
- [ 0.001768] CPU: Testing write buffer coherency: ok
- [ 0.001820] ftrace: allocating 25140 entries in 74 pages
- [ 0.030293] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.030312] [sunxi_smp_prepare_cpus] enter
- [ 0.030350] Setting up static identity map for 0x40676de8 - 0x40676e40
- [ 0.031287] CPU1: Booted secondary processor
- [ 0.031287] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.031421] CPU2: Booted secondary processor
- [ 0.031421] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.031421] CPU3: Booted secondary processor
- [ 0.031421] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.040190] Brought up 4 CPUs
- [ 0.040207] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.040926] devtmpfs: initialized
- [ 0.044351] wakeup src cnt is : 1.
- [ 0.044364] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
- [ 0.044376] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
- [ 0.044388] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
- [ 0.044401] sunxi pm init
- [ 0.044547] pinctrl core: initialized pinctrl subsystem
- [ 0.054201] NET: Registered protocol family 16
- [ 0.055164] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.055164] script_sysfs_init success
- [ 0.055164] sunxi_dump_init success
- [ 0.055164] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.055164] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.055164] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.055164] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.055164] script config pll_video to 297 Mhz
- [ 0.055164] script config pll_de to 864 Mhz
- [ 0.055164] script config pll_ve to 402 Mhz
- [ 0.055164] sunxi_default_clk_init
- [ 0.055164] try to set pll6ahb1 to 200000000
- [ 0.055164] try to set ahb clk source to pll6ahb1
- [ 0.055164] set ahb clk source to pll6ahb1
- [ 0.055164] try to set ahb1 to 200000000
- [ 0.055164] try to set apb1 to 100000000
- [ 0.055598] ===fe3o4==== sunxi_root_procfs_attach ret:0
- [ 0.061237] bio: create slab <bio-0> at 0
- [ 0.061237] [ARISC] :sunxi-arisc driver v1.04
- [ 0.076666] [ARISC] :arisc version: [v0.1.34]
- [ 0.164917] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
- [ 0.170445] SCSI subsystem initialized
- [ 0.170655] usbcore: registered new interface driver usbfs
- [ 0.170733] usbcore: registered new interface driver hub
- [ 0.170763] usbcore: registered new device driver usb
- [ 0.170763] twi_chan_cfg()335 - [twi0] has no twi_regulator.
- [ 0.170763] twi_chan_cfg()335 - [twi1] has no twi_regulator.
- [ 0.170763] twi_chan_cfg()335 - [twi2] has no twi_regulator.
- [ 0.170763] Linux video capture interface: v2.00
- [ 0.170781] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.171525] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.171590] Switching to clocksource arch_sys_counter
- [ 0.184050] FS-Cache: Loaded
- [ 0.184331] CacheFiles: Loaded
- [ 0.195647] NET: Registered protocol family 2
- [ 0.207794] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.208367] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.208614] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- [ 0.208873] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.208885] TCP: reno registered
- [ 0.208899] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.208925] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.209273] NET: Registered protocol family 1
- [ 0.209652] RPC: Registered named UNIX socket transport module.
- [ 0.209665] RPC: Registered udp transport module.
- [ 0.209674] RPC: Registered tcp transport module.
- [ 0.209683] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.210312] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 0.210418] sunxi_reg_init enter
- [ 0.211233] audit: initializing netlink socket (disabled)
- [ 0.211277] type=2000 audit(0.210:1): initialized
- [ 0.213092] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.213192] NFS: Registering the id_resolver key type
- [ 0.213580] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.214330] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.214649] fuse init (API version 7.18)
- [ 0.215405] Btrfs loaded
- [ 0.215430] msgmni has been set to 989
- [ 0.216571] io scheduler noop registered
- [ 0.216584] io scheduler deadline registered
- [ 0.216665] io scheduler cfq registered (default)
- [ 0.217148] [DISP]disp_module_init
- [ 0.225193] [DISP] Fb_map_kernel_logo,line:931:Fb_map_kernel_logo failed!
- [ 0.242566] Console: switching to colour frame buffer device 160x45
- [ 0.260888] [DISP]disp_module_init finish
- [ 0.261118] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
- [ 0.261437] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.261452] sw_uart_pm()890 - uart0 clk is already enable
- [ 0.261472] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 0.453738] console [ttyS0] enabled
- [ 0.645451] sunxi_cmatest_init enter
- [ 0.770071] sunxi_cmatest_init success
- [ 0.774501] loop: module loaded
- [ 0.836578] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
- [ 0.836591] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
- [ 0.836626] tun: Universal TUN/TAP device driver, 1.6
- [ 0.836634] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.837022] script_get_item return type err
- [ 0.837055] gmac0: probe of gmac0 failed with error -14
- [ 0.837085] PPP generic driver version 2.4.2
- [ 0.837244] PPP BSD Compression module registered
- [ 0.837253] PPP Deflate Compression module registered
- [ 0.838058] PPP MPPE Compression module registered
- [ 0.838072] NET: Registered protocol family 24
- [ 0.838138] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.858213] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.858246] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 0.932229] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 1.140039] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 1.264706] hub 1-0:1.0: USB hub found
- [ 1.268878] hub 1-0:1.0: 1 port detected
- [ 1.293627] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.302539] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
- [ 1.311507] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
- [ 1.330045] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
- [ 1.337137] hub 2-0:1.0: USB hub found
- [ 1.341325] hub 2-0:1.0: 1 port detected
- [ 1.346062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.372986] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.381527] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 3
- [ 1.389952] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 1.454558] hub 3-0:1.0: USB hub found
- [ 1.458728] hub 3-0:1.0: 1 port detected
- [ 1.483465] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.491990] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 4
- [ 1.500426] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
- [ 1.564583] hub 4-0:1.0: USB hub found
- [ 1.568751] hub 4-0:1.0: 1 port detected
- [ 1.573494] Initializing USB Mass Storage driver...
- [ 1.579058] usbcore: registered new interface driver usb-storage
- [ 1.585744] USB Mass Storage support registered.
- [ 1.590926] usbcore: registered new interface driver ums-alauda
- [ 1.597530] usbcore: registered new interface driver ums-cypress
- [ 1.604247] usbcore: registered new interface driver ums-datafab
- [ 1.610965] usbcore: registered new interface driver ums_eneub6250
- [ 1.617857] usbcore: registered new interface driver ums-freecom
- [ 1.624588] usbcore: registered new interface driver ums-isd200
- [ 1.631210] usbcore: registered new interface driver ums-jumpshot
- [ 1.638004] usbcore: registered new interface driver ums-karma
- [ 1.644534] usbcore: registered new interface driver ums-onetouch
- [ 1.651373] usbcore: registered new interface driver ums-realtek
- [ 1.658078] usbcore: registered new interface driver ums-sddr09
- [ 1.664702] usbcore: registered new interface driver ums-sddr55
- [ 1.671376] usbcore: registered new interface driver ums-usbat
- [ 1.678171] file system registered
- [ 1.683796] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.691461] android_usb gadget: Number of LUNs=3
- [ 1.696585] lun0: LUN: removable file: (no medium)
- [ 1.702011] lun1: LUN: removable file: (no medium)
- [ 1.707423] lun2: LUN: removable file: (no medium)
- [ 1.713157] android_usb gadget: android_usb ready
- [ 1.718591] uinput result 0 , vmouse_init
- [ 1.723848] mousedev: PS/2 mouse device common for all mice
- [ 1.730270] ls_fetch_sysconfig_para: type err device_used = 0.
- [ 1.736935] =========script_get_err============
- [ 1.742004] ltr_init: ls_fetch_sysconfig_para err.
- [ 1.747616] [RTC] WARNING: Rtc time will be wrong!!
- [ 1.753283] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
- [ 1.760685] i2c /dev entries driver
- [ 1.764812] IR RC5(x) protocol handler initialized
- [ 1.770262] sunxi cedar version 0.1
- [ 1.774264] [cedar]: install start!!!
- [ 1.778514] [cedar]: install end!!!
- [ 1.782640] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18)
- [ 1.791999] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19)
- [ 1.801349] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a)
- [ 1.810694] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29)
- [ 1.820027] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a)
- [ 1.829357] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b)
- [ 1.838703] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c)
- [ 1.848048] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d)
- [ 1.857392] sunxi_i2c_do_xfer()980 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e)
- [ 1.866583] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
- [ 1.873709] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
- [ 1.884885] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
- [ 1.892344] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
- [ 1.898519] timeout_to_interv, line 167
- [ 1.902785] interv_to_timeout, line 189
- [ 1.907039] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
- [ 1.916533] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.926010] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
- [ 1.935489] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Feb 19 2016 at 16:47:51
- [ 1.946919] [mmc]: get mmc0's sdc_power is null!
- [ 1.952071] [mmc]: get mmc1's sdc_power is null!
- [ 1.957192] [mmc]: get mmc1's 2xmode ok, val = 1
- [ 1.962326] [mmc]: get mmc1's ddrmode ok, val = 1
- [ 1.967550] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
- [ 1.975703] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 1.988842] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 2.001370] no blue_led, ignore it!
- [ 2.005432] Registered led device: red_led
- [ 2.010080] Registered led device: green_led
- [ 2.015498] usbcore: registered new interface driver usbhid
- [ 2.021698] usbhid: USB HID core driver
- [ 2.029493] asoc: sndcodec <-> sunxi-codec mapping ok
- [ 2.038163] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
- [ 2.045071] oprofile: using arm/armv7-ca7
- [ 2.049672] u32 classifier
- [ 2.052686] Actions configured
- [ 2.056615] IPv4 over IPv4 tunneling driver
- [ 2.061807] TCP: bic registered
- [ 2.065290] TCP: cubic registered
- [ 2.068959] TCP: westwood registered
- [ 2.072937] TCP: highspeed registered
- [ 2.076994] TCP: hybla registered
- [ 2.080687] TCP: htcp registered
- [ 2.084261] TCP: vegas registered
- [ 2.087931] TCP: veno registered
- [ 2.091516] TCP: scalable registered
- [ 2.095476] TCP: lp registered
- [ 2.098857] TCP: yeah registered
- [ 2.102442] TCP: illinois registered
- [ 2.106403] Initializing XFRM netlink socket
- [ 2.111337] NET: Registered protocol family 10
- [ 2.117177] NET: Registered protocol family 17
- [ 2.122155] NET: Registered protocol family 15
- [ 2.127114] Registering the dns_resolver key type
- [ 2.132805] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 2.141322] ThumbEE CPU extension supported.
- [ 2.146068] Registering SWP/SWPB emulation handler
- [ 2.152243] cmdline,disp=
- [ 2.155447] [HDMI] power vcc-hdmi-18
- [ 2.190173] ths_fetch_sysconfig_para: type err device_used = 1.
- [ 2.197822] parse cooler0 from sysconfig failed
- [ 2.203209] CPU Budget:Register notifier
- [ 2.207559] CPU Budget:register Success
- [ 2.211832] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 2.224576] [rf_pm]: select module num is 7
- [ 2.229219] [rf_pm]: module power0 name vcc-wifi-33
- [ 2.234665] [rf_pm]: failed to fetch module_power1
- [ 2.239976] [rf_pm]: mod has no chip_en gpio
- [ 2.244738] [rf_pm]: failed to fetch lpo_use_apclk
- [ 2.250061] [rf_pm]: regulator on.
- [ 2.253830] [wifi_pm]: no wifi used in configuration
- [ 2.259332] [rfkill]: init no bt used in configuration
- [ 2.265038] ALSA device list:
- [ 2.268323] #0: audiocodec
- [ 2.271522] #1: sndhdmi
- [ 2.274791] Waiting for root device /dev/mmcblk0p1...
- [ 2.790077] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=4
- [ 2.975040] [mmc]: mmc 0 detect change, present 1
- [ 3.480091] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.491377] [mmc]: sdc0 power_supply is null
- [ 3.510076] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.542389] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
- [ 3.551461] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
- [ 3.559679] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.572522] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.589253] *******************Try sdio*******************
- [ 3.596240] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 3.605232] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 3.614236] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 3.623125] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
- [ 3.631168] *******************Try sd *******************
- [ 3.637804] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.648073] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.660713] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.691535] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 3.703377] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 3.713712] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 3.724087] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 3.734416] mmc0: new high speed SDHC card at address 1234
- [ 3.741030] mmcblk0: mmc0:1234 SA08G 7.21 GiB
- [ 3.747536] mmcblk0: p1
- [ 3.750936] *******************sd init ok*******************
- [ 3.896592] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
- [ 3.905863] VFS: Mounted root (ext4 filesystem) on device 179:1.
- [ 3.915623] devtmpfs: mounted
- [ 3.919229] Freeing init memory: 304K
- [ 4.710457] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
- [ 4.725716] systemd[1]: Detected architecture 'arm'.
- Welcome to [1mDebian GNU/Linux 8 (jessie)[0m!
- [ 5.621579] systemd[1]: Set hostname to <orangepione>.
- [ 5.937776] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
- [ 5.956558] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 5.965461] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 5.973948] systemd[1]: Expecting device dev-ttyS0.device...
- Expecting device dev-ttyS0.device...
- [ 6.000203] systemd[1]: Starting Remote File Systems (Pre).
- [[32m OK [0m] Reached target Remote File Systems (Pre).
- [ 6.030124] systemd[1]: Reached target Remote File Systems (Pre).
- [ 6.036968] systemd[1]: Starting Encrypted Volumes.
- [[32m OK [0m] Reached target Encrypted Volumes.
- [ 6.060100] systemd[1]: Reached target Encrypted Volumes.
- [ 6.066178] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 6.075291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 6.084148] systemd[1]: Starting Paths.
- [[32m OK [0m] Reached target Paths.
- [ 6.100098] systemd[1]: Reached target Paths.
- [ 6.105040] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 6.115527] systemd[1]: Starting Swap.
- [[32m OK [0m] Reached target Swap.
- [ 6.140099] systemd[1]: Reached target Swap.
- [ 6.144887] systemd[1]: Starting Root Slice.
- [[32m OK [0m] Created slice Root Slice.
- [ 6.170101] systemd[1]: Created slice Root Slice.
- [ 6.175363] systemd[1]: Starting User and Session Slice.
- [[32m OK [0m] Created slice User and Session Slice.
- [ 6.200118] systemd[1]: Created slice User and Session Slice.
- [ 6.206560] systemd[1]: Starting Delayed Shutdown Socket.
- [[32m OK [0m] Listening on Delayed Shutdown Socket.
- [ 6.230116] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 6.236549] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [[32m OK [0m] Listening on /dev/initctl Compatibility Named Pipe.
- [ 6.260119] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 6.267911] systemd[1]: Starting Journal Socket (/dev/log).
- [[32m OK [0m] Listening on Journal Socket (/dev/log).
- [ 6.295127] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.301845] systemd[1]: Starting udev Control Socket.
- [[32m OK [0m] Listening on udev Control Socket.
- [ 6.330111] systemd[1]: Listening on udev Control Socket.
- [ 6.336170] systemd[1]: Starting udev Kernel Socket.
- [[32m OK [0m] Listening on udev Kernel Socket.
- [ 6.360110] systemd[1]: Listening on udev Kernel Socket.
- [ 6.366092] systemd[1]: Starting Journal Socket.
- [[32m OK [0m] Listening on Journal Socket.
- [ 6.390173] systemd[1]: Listening on Journal Socket.
- [ 6.395898] systemd[1]: Starting System Slice.
- [[32m OK [0m] Created slice System Slice.
- [ 6.420195] systemd[1]: Created slice System Slice.
- [ 6.425776] systemd[1]: Starting system-getty.slice.
- [[32m OK [0m] Created slice system-getty.slice.
- [ 6.450172] systemd[1]: Created slice system-getty.slice.
- [ 6.456302] systemd[1]: Starting system-serial\x2dgetty.slice.
- [[32m OK [0m] Created slice system-serial\x2dgetty.slice.
- [ 6.480169] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 6.487403] systemd[1]: Starting Increase datagram queue length...
- Starting Increase datagram queue length...
- [ 6.580800] systemd[1]: Starting Restore / save the current clock...
- Starting Restore / save the current clock...
- [ 6.680622] systemd[1]: Starting udev Coldplug all Devices...
- Starting udev Coldplug all Devices...
- [ 6.750934] systemd[1]: Mounting Debug File System...
- Mounting Debug File System...
- [ 6.830488] systemd[1]: Mounted POSIX Message Queue File System.
- [ 6.840591] systemd[1]: Started Set Up Additional Binary Formats.
- [ 6.863932] systemd[1]: Starting Load Kernel Modules...
- Starting Load Kernel Modules...
- [ 7.041023] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- Starting Create list of required static device nodes...rrent kernel...
- [ 7.064008] failed to get normal led pin assign
- [ 7.069040] failed to get standby led pin assign
- [ 7.074193] gpio_pin_1(12) gpio_request
- [ 7.078617] gpio_pin_2(11) gpio_request
- [ 7.083095] gpio_pin_3(6) gpio_request
- [ 7.087366] gpio_pin_4(13) gpio_request
- [ 7.091817] gpio_pin_5(14) gpio_request
- [ 7.096182] gpio_pin_6(1) gpio_request
- [ 7.100465] gpio_pin_7(110) gpio_request
- [ 7.104932] gpio_pin_8(0) gpio_request
- [ 7.109192] gpio_pin_9(3) gpio_request
- [ 7.113486] gpio_pin_10(68) gpio_request
- [ 7.117941] gpio_pin_11(71) gpio_request
- [ 7.122423] gpio_pin_12(64) gpio_request
- [ 7.126880] gpio_pin_13(65) gpio_request
- [ 7.131360] gpio_pin_14(2) gpio_request
- [ 7.135714] gpio_pin_15(66) gpio_request
- [ 7.140200] gpio_pin_16(67) gpio_request
- [ 7.144658] gpio_pin_17(21) gpio_request
- [ 7.149132] gpio_pin_18(19) gpio_request
- [ 7.153605] gpio_pin_19(18) gpio_request
- [ 7.158064] gpio_pin_20(7) gpio_request
- [ 7.162445] gpio_pin_21(8) gpio_request
- [ 7.166803] gpio_pin_22(200) gpio_request
- [ 7.171388] gpio_pin_23(9) gpio_request
- [ 7.175752] gpio_pin_24(10) gpio_request
- [ 7.180238] gpio_pin_25(201) gpio_request
- [ 7.184790] gpio_pin_26(20) gpio_request
- [ 7.189266] gpio_pin_27(198) gpio_request
- [ 7.193856] gpio_pin_28(199) gpio_request
- [ 7.198445] get config err!
- [ 7.201567] gpio_sw: probe of gpio_sw.0 failed with error -12
- [ 7.207950] get config err!
- [ 7.211066] gpio_sw: probe of gpio_sw.1 failed with error -12
- [ 7.217447] gpio name is PA12, ret = 0
- [ 7.221739] gpio name is PA11, ret = 0
- [ 7.225997] gpio name is PA6, ret = 0
- [ 7.230190] gpio name is PA13, ret = 0
- [ 7.234456] gpio name is PA14, ret = 0
- [ 7.238713] gpio name is PA1, ret = 0
- [ 7.242893] gpio name is PD14, ret = 0
- [ 7.247157] gpio name is PA0, ret = 0
- [ 7.251355] gpio name is PA3, ret = 0
- [ 7.255524] gpio name is PC4, ret = 0
- [ 7.259685] gpio name is PC7, ret = 0
- [ 7.260635] systemd[1]: Mounted Huge Pages File System.
- [ 7.260749] systemd[1]: Starting LSB: Set keymap...
- [ 7.275204] gpio name is PC0, ret = 0
- Starting LSB: Set keymap...
- [ 7.280163] gpio name is PC1, ret = 0
- [ 7.286704] gpio name is PA2, ret = 0
- [ 7.290905] gpio name is PC2, ret = 0
- [ 7.295076] gpio name is PC3, ret = 0
- [ 7.299246] gpio name is PA21, ret = 0
- [ 7.303541] gpio name is PA19, ret = 0
- [ 7.307808] gpio name is PA18, ret = 0
- [ 7.312115] gpio name is PA7, ret = 0
- [ 7.316383] gpio name is PA8, ret = 0
- [ 7.320606] gpio name is PG8, ret = 0
- [ 7.324803] gpio name is PA9, ret = 0
- [ 7.328979] gpio name is PA10, ret = 0
- [ 7.333297] gpio name is PG9, ret = 0
- [ 7.337481] gpio name is PA20, ret = 0
- [ 7.341811] gpio_init finish with uesd 1!
- [ 7.349526] W1_SUNXI: Added w1-gpio on GPIO-20
- [ 7.358293] Driver for 1-wire Dallas network protocol.
- [ 7.370476] systemd[1]: Starting Slices.
- [[32m OK [0m] Reached target Slices.
- [ 7.390213] systemd[1]: Reached target Slices.
- [[32m OK [0m] Mounted Debug File System.
- [ 7.410136] systemd[1]: Mounted Debug File System.
- [[32m OK [0m] Started Increase datagram queue length.
- [ 7.480131] systemd[1]: Started Increase datagram queue length.
- [[32m OK [0m] Started Restore / save the current clock.
- [ 7.600191] systemd[1]: Started Restore / save the current clock.
- [[32m OK [0m] Started Load Kernel Modules.
- [ 7.795228] systemd[1]: Started Load Kernel Modules.
- [[32m OK [0m] Started Create list of required static device nodes ...current kernel.
- [ 7.880143] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [[32m OK [0m] Started LSB: Set keymap.
- [ 7.960131] systemd[1]: Started LSB: Set keymap.
- [[32m OK [0m] Started udev Coldplug all Devices.
- [ 8.100200] systemd[1]: Started udev Coldplug all Devices.
- [ 8.109254] systemd[1]: Time has been changed
- [ 8.114898] systemd[1]: Starting Create Static Device Nodes in /dev...
- Starting Create Static Device Nodes in /dev...
- [ 8.200933] systemd[1]: Starting Apply Kernel Variables...
- Starting Apply Kernel Variables...
- [ 8.280714] systemd[1]: Mounting FUSE Control File System...
- Mounting FUSE Control File System...
- [ 8.370659] systemd[1]: Mounted Configuration File System.
- [ 8.376934] systemd[1]: Starting Syslog Socket.
- [[32m OK [0m] Listening on Syslog Socket.
- [ 8.400158] systemd[1]: Listening on Syslog Socket.
- [ 8.405689] systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [[32m OK [0m] Started Journal Service.
- [ 8.510371] systemd[1]: Started Journal Service.
- [[32m OK [0m] Mounted FUSE Control File System.
- [[32m OK [0m] Started Create Static Device Nodes in /dev.
- [[32m OK [0m] Started Apply Kernel Variables.
- Starting udev Kernel Device Manager...
- [ 8.897627] systemd-udevd[108]: starting version 215
- [[32m OK [0m] Started udev Kernel Device Manager.
- Starting Copy rules generated while the root was ro...
- Starting LSB: Tune IDE hard disks...
- Starting LSB: Set preliminary keymap...
- [[32m OK [0m] Started Copy rules generated while the root was ro.
- [[32m OK [0m] Started LSB: Tune IDE hard disks.
- [[32m OK [0m] Reached target Sound Card.
- [[32m OK [0m] Found device /dev/ttyS0.
- [[0m[31m* [0m] A start job is running for LSB: Set preliminary keymap (9s / no limit)
- [K[[1;31m*[0m[31m* [0m] A start job is running for LSB: Set preliminary keym...10s / no limit)
- [K[[32m OK [0m] Started LSB: Set preliminary keymap.
- Starting Remount Root and Kernel File Systems...
- [ 19.737653] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=writeback,commit=600,errors=remount-ro
- [[32m OK [0m] Started Remount Root and Kernel File Systems.
- Starting Various fixups to make systemd work better on Debian...
- Starting Load/Save Random Seed...
- [[32m OK [0m] Reached target Local File Systems (Pre).
- Mounting /tmp...
- [[32m OK [0m] Mounted /tmp.
- [[32m OK [0m] Reached target Local File Systems.
- Starting Create Volatile Files and Directories...
- [[32m OK [0m] Reached target Remote File Systems.
- Starting Trigger Flushing of Journal to Persistent Storage...
- Starting LSB: Prepare console...
- [[32m OK [0m] Started Load/Save Random Seed.
- [[32m OK [0m] Started Various fixups to make systemd work better on Debian.
- [[32m OK [0m] Started Create Volatile Files and Directories.
- [[32m OK [0m] Started LSB: Prepare console.
- Starting LSB: Set console font and keymap...
- Starting Update UTMP about System Boot/Shutdown...
- Starting LSB: Raise network interfaces....
- [ 21.908800] systemd-journald[107]: Received request to flush runtime journal from PID 1
- [[32m OK [0m] Started Update UTMP about System Boot/Shutdown.
- [[32m OK [0m] Started Trigger Flushing of Journal to Persistent Storage.
- [[32m OK [0m] Started LSB: Raise network interfaces..
- [[32m OK [0m] Reached target Network.
- [[32m OK [0m] Reached target Network is Online.
- [[32m OK [0m] Started LSB: Set console font and keymap.
- [[32m OK [0m] Reached target System Initialization.
- [[32m OK [0m] Listening on D-Bus System Message Bus Socket.
- [[32m OK [0m] Reached target Sockets.
- [[32m OK [0m] Reached target Timers.
- [[32m OK [0m] Reached target Basic System.
- Starting Entropy daemon using the HAVEGE algorithm...
- [[32m OK [0m] Started Entropy daemon using the HAVEGE algorithm.
- Starting Regular background program processing daemon...
- [[32m OK [0m] Started Regular background program processing daemon.
- Starting OpenBSD Secure Shell server...
- [[32m OK [0m] Started OpenBSD Secure Shell server.
- Starting /etc/rc.local Compatibility...
- Starting Login Service...
- Starting LSB: Starts LIRC daemon....
- Starting LSB: Advanced IEEE 802.11 management daemon...
- Starting LSB: Start NTP daemon...
- Starting LSB: Get some info about hardware for some ...basic things...
- Starting LSB: disk temperature monitoring daemon...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- Starting D-Bus System Message Bus...
- [[32m OK [0m] Started D-Bus System Message Bus.
- Starting System Logging Service...
- Starting Permit User Sessions...
- [[32m OK [0m] Started System Logging Service.
- [[32m OK [0m] Started /etc/rc.local Compatibility.
- [[32m OK [0m] Started LSB: Starts LIRC daemon..
- [[32m OK [0m] Started LSB: Advanced IEEE 802.11 management daemon.
- [[32m OK [0m] Started LSB: Start NTP daemon.
- [[32m OK [0m] Started LSB: Get some info about hardware for some A...e basic things.
- [[32m OK [0m] Started LSB: disk temperature monitoring daemon.
- [[32m OK [0m] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- [[32m OK [0m] Started Permit User Sessions.
- Starting LSB: set CPUFreq kernel parameters...
- Starting LSB: Script to run when first starting...
- Starting Getty on tty1...
- [[32m OK [0m] Started Getty on tty1.
- Starting Serial Getty on ttyS0...
- [[32m OK [0m] Started Serial Getty on ttyS0.
- [[32m OK [0m] Reached target Login Prompts.
- [[32m OK [0m] Started LSB: set CPUFreq kernel parameters.
- [[32m OK [0m] Started Login Service.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- [[32m OK [0m] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- Debian GNU/Linux 8 orangepione ttyS0
- orangepione login: root
- Password:
- You are required to change your password immediately (root enforced)
- Changing password for root.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement