Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.21-tinycore (root@box) (gcc version 4.6.1 (GCC) ) #3021 SMP Sat Feb 18 11:54:11 EET 2012
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000ffff800 (ACPI data)
 BIOS-e820: 000000000ffff800 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.1 present.
DMI: Sony Corporation     PCG-F580(UC)        /PCG-F580(UC)        , BIOS R0116K1 04/17/00
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xfff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FF0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 00c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-000000000fff0000
 0000000000 - 0000400000 page 4k
 0000400000 - 000fc00000 page 2M
 000fc00000 - 000fff0000 page 4k
kernel direct mapping tables up to fff0000 @ bfb000-c00000
RAMDISK: 0facc000 - 0ffef000
ACPI: RSDP 000f7080 00014 (v00 PTLTD )
ACPI: RSDT 0fffbd93 0002C (v01 SONY   K1       20000417 PTL  00000000)
ACPI: FACP 0ffff765 00074 (v01 SONY   K1       20000417 PTL  000F4240)
ACPI: DSDT 0fffbdbf 039A6 (v01   SONY  K1      20000417 MSFT 01000007)
ACPI: FACS 0fffffc0 00040
ACPI: BOOT 0ffff7d9 00027 (v01 SONY   A0       20000417 PTL  00000001)
0MB HIGHMEM available.
255MB LOWMEM available.
  mapped low ram: 0 - 0fff0000
  low ram: 0 - 0fff0000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0000fff0
  HighMem  empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0000fff0
On node 0 totalpages: 65407
free_area_init_node: node 0, pgdat c053fbc0, node_mem_map cf8cc200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 480 pages used for memmap
  Normal zone: 60944 pages, LIFO batch:15
Using APIC driver default
ACPI: PM-Timer IO Port: 0x8008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000eb000
PM: Registered nosave memory: 00000000000eb000 - 0000000000100000
Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @cf400000 s24128 r0 d20928 u4194304
pcpu-alloc: s24128 r0 d20928 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64895
Kernel command line: initrd=/tce/boot/core.gz quiet home=sda1 opt=sda1 norestore tce=UUID="dafcb5d5-694e-4786-9a4f-3440c2b93bfa" BOOT_IMAGE=/tce/boot/vmlinuz
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Initializing CPU#0
allocated 1048064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 247828k/262080k available (3168k kernel code, 13800k reserved, 1202k data, 436k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd07f0000 - 0xff7fe000   ( 752 MB)
    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
      .init : 0xc0545000 - 0xc05b2000   ( 436 kB)
      .data : 0xc041833b - 0xc0544e40   (1202 kB)
      .text : 0xc0100000 - 0xc041833b   (3168 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=cf008000 soft=cf00a000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 645.051 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 1290.85 BogoMIPS (lpj=2150170)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 5 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20110413
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Performance Events:
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 400000)
p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
Brought up 1 CPUs
Total of 1 processors activated (1290.85 BogoMIPS).
PM: Registering ACPI NVS region at ffff800 (2048 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffdfffff] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci 0000:00:00.0: [8086:7190] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0x40000000-0x40ffffff pref]
pci 0000:00:01.0: [8086:7191] type 1 class 0x000604
pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
pci 0000:00:07.1: reg 20: [io  0xfcf0-0xfcff]
pci 0000:00:07.2: [8086:7112] type 0 class 0x000c03
pci 0000:00:07.2: reg 20: [io  0xfcc0-0xfcdf]
pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
pci 0000:00:07.3: quirk: [io  0x8000-0x803f] claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: [io  0x1040-0x104f] claimed by PIIX4 SMB
pci 0000:00:07.3: PIIX4 devres I PIO at 0398-0399
pci 0000:00:07.3: PIIX4 devres J PIO at 0398-0399
pci 0000:00:08.0: [104d:8039] type 0 class 0x000c00
pci 0000:00:08.0: reg 10: [mem 0xfedff000-0xfedff7ff]
pci 0000:00:08.0: reg 14: [mem 0xfedffc00-0xfedffdff]
pci 0000:00:08.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:09.0: [1073:0010] type 0 class 0x000401
pci 0000:00:09.0: reg 10: [mem 0xfedf0000-0xfedf7fff]
pci 0000:00:09.0: reg 14: [io  0xfc40-0xfc7f]
pci 0000:00:09.0: reg 18: [io  0xfcec-0xfcef]
pci 0000:00:09.0: supports D2
pci 0000:00:0a.0: [14f1:2443] type 0 class 0x000780
pci 0000:00:0a.0: reg 10: [mem 0xfede0000-0xfedeffff]
pci 0000:00:0a.0: reg 14: [io  0xfce0-0xfce7]
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0c.0: [1180:0478] type 2 class 0x000607
pci 0000:00:0c.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0c.1: [1180:0478] type 2 class 0x000607
pci 0000:00:0c.1: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:00:0c.1: supports D1 D2
pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.1: PME# disabled
pci 0000:01:00.0: [10c8:0016] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xfe800000-0xfebfffff]
pci 0000:01:00.0: reg 18: [mem 0xfec00000-0xfecfffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfecfffff]
pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfdffffff pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 pci0000:00: Unable to request _OSC control (_OSC support mask: 0x18)
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 9) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000000fff0000 - 000000000fffffff
Switching to clocksource pit
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x10000000-0xffdfffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io  0x0080]
pnp 00:01: [io  0x00b2-0x00b3]
pnp 00:01: [io  0x0398-0x0399]
pnp 00:01: [io  0x04d0-0x04d1]
pnp 00:01: [io  0x1040-0x104f]
pnp 00:01: [io  0x8000-0x804f]
pnp 00:01: [io  0x0072-0x0073]
system 00:01: [io  0x0398-0x0399] has been reserved
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x1040-0x104f] has been reserved
system 00:01: [io  0x8000-0x804f] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [mem 0x00100000-0x0fffffff]
pnp 00:02: [mem 0x00000000-0x0009ffff]
pnp 00:02: [mem 0x000e0000-0x000fffff]
pnp 00:02: [mem 0xfff80000-0xffffffff]
pnp 00:02: [mem 0xfff7f600-0xfff7ffff]
system 00:02: [mem 0x00100000-0x0fffffff] could not be reserved
system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:02: [mem 0xfff80000-0xffffffff] has been reserved
system 00:02: [mem 0xfff7f600-0xfff7ffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0081-0x008f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io  0x0060]
pnp 00:07: [io  0x0064]
pnp 00:07: [irq 1]
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs SNY6001 (disabled)
pnp 00:0a: [io  0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io  0x03e8-0x03ef]
pnp 00:0b: [irq 10]
pnp 00:0b: [dma 0]
pnp 00:0b: Plug and Play ACPI device, IDs SNY7001 NSC6001 (active)
pnp 00:0c: [io  0x0378-0x037f]
pnp 00:0c: [io  0x0778-0x077a]
pnp 00:0c: [irq 7]
pnp 00:0c: [dma 3]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0d: [io  0x03f0-0x03f5]
pnp 00:0d: [io  0x03f7]
pnp 00:0d: [irq 6]
pnp 00:0d: [dma 2]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:0c.0: BAR 9: assigned [mem 0x10000000-0x13ffffff pref]
pci 0000:00:0c.0: BAR 10: assigned [mem 0x14000000-0x17ffffff]
pci 0000:00:0c.1: BAR 9: assigned [mem 0x18000000-0x1bffffff pref]
pci 0000:00:0c.1: BAR 10: assigned [mem 0x1c000000-0x1fffffff]
pci 0000:00:08.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
pci 0000:00:0c.0: BAR 0: assigned [mem 0x20010000-0x20010fff]
pci 0000:00:0c.0: BAR 0: set to [mem 0x20010000-0x20010fff] (PCI address [0x20010000-0x20010fff])
pci 0000:00:0c.1: BAR 0: assigned [mem 0x20011000-0x20011fff]
pci 0000:00:0c.1: BAR 0: set to [mem 0x20011000-0x20011fff] (PCI address [0x20011000-0x20011fff])
pci 0000:00:0c.0: BAR 7: assigned [io  0x1400-0x14ff]
pci 0000:00:0c.0: BAR 8: assigned [io  0x1800-0x18ff]
pci 0000:00:0c.1: BAR 7: assigned [io  0x1c00-0x1cff]
pci 0000:00:0c.1: BAR 8: assigned [io  0x2000-0x20ff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfecfffff]
pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:0c.0: CardBus bridge to [bus 02-05]
pci 0000:00:0c.0:   bridge window [io  0x1400-0x14ff]
pci 0000:00:0c.0:   bridge window [io  0x1800-0x18ff]
pci 0000:00:0c.0:   bridge window [mem 0x10000000-0x13ffffff pref]
pci 0000:00:0c.0:   bridge window [mem 0x14000000-0x17ffffff]
pci 0000:00:0c.1: CardBus bridge to [bus 06-09]
pci 0000:00:0c.1:   bridge window [io  0x1c00-0x1cff]
pci 0000:00:0c.1:   bridge window [io  0x2000-0x20ff]
pci 0000:00:0c.1:   bridge window [mem 0x18000000-0x1bffffff pref]
pci 0000:00:0c.1:   bridge window [mem 0x1c000000-0x1fffffff]
pci 0000:00:01.0: power state changed by ACPI to D0
pci 0000:00:01.0: power state changed by ACPI to D0
pci 0000:00:0c.0: power state changed by ACPI to D0
pci 0000:00:0c.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
pci 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
Switched to NOHz mode on CPU #0
pci 0000:00:0c.1: power state changed by ACPI to D0
pci 0000:00:0c.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
pci 0000:00:0c.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfecfffff]
pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfdffffff pref]
pci_bus 0000:02: resource 0 [io  0x1400-0x14ff]
pci_bus 0000:02: resource 1 [io  0x1800-0x18ff]
pci_bus 0000:02: resource 2 [mem 0x10000000-0x13ffffff pref]
pci_bus 0000:02: resource 3 [mem 0x14000000-0x17ffffff]
pci_bus 0000:06: resource 0 [io  0x1c00-0x1cff]
pci_bus 0000:06: resource 1 [io  0x2000-0x20ff]
pci_bus 0000:06: resource 2 [mem 0x18000000-0x1bffffff pref]
pci_bus 0000:06: resource 3 [mem 0x1c000000-0x1fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 32
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Intel AES-NI instructions are not detected.
Trying to unpack rootfs image as initramfs...
fuse init (API version 7.16)
msgmni has been set to 484
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [ATF0] (33 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 8250
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
brd: module loaded
VMware PVSCSI driver - version 1.0.1.0-k
ata_piix 0000:00:07.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:07.2: power state changed by ACPI to D0
uhci_hcd 0000:00:07.2: power state changed by ACPI to D0
uhci_hcd 0000:00:07.2: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 9, io base 0x0000fcc0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0)
cpuidle: using governor ladder
cpuidle: using governor menu
padlock_aes: VIA PadLock not detected.
padlock_sha: VIA PadLock Hash Engine not detected.
Driver for HIFN 795x crypto accelerator chip has been successfully registered.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
Using IPI No-Shortcut mode
rtc_cmos 00:04: setting system clock to 2013-01-08 10:36:18 UTC (1357641378)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2402, 1515, max UDMA/33
ata2.00: configured for UDMA/33
isapnp: No Plug & Play device found
Freeing initrd memory: 5260k freed
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input2
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input3
ata1.00: ATA-4: IBM-DARA-212000, AR4OA53A, max UDMA/66
ata1.00: 23579136 sectors, multi 16: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      IBM-DARA-212000  AR4O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 23579136 512-byte logical blocks: (12.0 GB/11.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-C2402 1515 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 436k freed
loop: module loaded
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
zram: disk size not provided. You can use disksize_kb module param to specify size.
Using default: (25% of RAM).
zcache: module is from the staging directory, the quality is unknown, you have been warned.
zcache: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
[Firmware Bug]: ACPI(VID0) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
ACPI: Video Device [VID0] (multi-head: yes  rom: no  post: no)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT2] (battery absent)
sony_laptop: Sony Programmable IO Control Driver v0.6
sony_laptop: detected Type1 model
input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/SNY6001:00/input/input5
input: Sony Vaio Jogdial as /devices/virtual/input/input6
sony_laptop: device allocated minor is 56
sony_laptop: Sony Notebook Control Driver v0.6
input: PC Speaker as /devices/platform/pcspkr/input/input7
yenta_cardbus 0000:00:0c.0: CardBus bridge found [104d:8073]
yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0818, PCI irq 9
yenta_cardbus 0000:00:0c.0: Socket status: 30000820
yenta_cardbus 0000:00:0c.1: CardBus bridge found [104d:8073]
Adding 63376k swap on /dev/zram0.  Priority:-1 extents:1 across:63376k SS
yenta_cardbus 0000:00:0c.1: ISA IRQ mask 0x0818, PCI irq 9
yenta_cardbus 0000:00:0c.1: Socket status: 30000006
ppdev: user-space parallel port driver
squashfs: version 4.0 (2009/01/31) Phillip Lougher
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f 0x398-0x39f
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe8000-0xfffff
pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:02:00.0: [168c:001a] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x14000000-0x1400ffff]
pci 0000:02:00.0: BAR 0: set to [mem 0x14000000-0x1400ffff] (PCI address [0x14000000-0x1400ffff])
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f 0x398-0x39f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe8000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 524284k swap on /dev/sda2.  Priority:-2 extents:1 across:524284k
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 16M @ 0x40000000
piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x1040, revision 0
cfg80211: Calling CRDA to update world regulatory domain
ath5k 0000:02:00.0: enabling device (0000 -> 0002)
ath5k 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
ath5k 0000:02:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x10
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: CO
ath: Regpair used: 0x10
ieee80211 phy0: Selected rate control algorithm 'pid'
ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
wlan0: authenticate with a0:21:b7:9e:5e:cc (try 1)
wlan0: deauthenticating from a0:21:b7:9e:5e:cc by local choice (reason=3)
wlan0: authenticate with a0:21:b7:9e:5e:cc (try 1)
wlan0: authenticated
wlan0: associate with a0:21:b7:9e:5e:cc (try 1)
wlan0: RX AssocResp from a0:21:b7:9e:5e:cc (capab=0x21 status=0 aid=4)
wlan0: associated