R6300_v2_CH_boot_log.txt

Decompressing...done

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S300402FF
00002610


RDLYW0 00000004

RDENW0 00000054

RDQSW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 01 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 02 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++
 03 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 04 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 05 -----------------+++++++++++++++++++++++X+++++++++++++++++++++++
 06 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 07 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 08 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 09 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 10 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 11 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 12 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 13 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++
 14 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 15 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++


PW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 01 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 02 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 03 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 04 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
 05 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 06 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
 07 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 08 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 09 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 10 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 11 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 12 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 13 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 14 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 15 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++


NW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 01 -----------------+++++++++++++++++++++++X+++++++++++++++++++++++
 02 --------------+++++++++++++++++++++++++X++++++++++++++++++++++++
 03 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 04 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 05 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 06 ---------+-++++++++++++++++++++++++++X++++++++++++++++++++++++++
 07 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 08 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 09 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 10 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 11 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++
 12 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 13 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++
 14 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 15 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++


WRDQW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 01 -+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++-
 02 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 03 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 04 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 05 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 06 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 07 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 08 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 09 ---++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-
 10 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 11 ---++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-
 12 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 13 --++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++-
 14 -+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++-
 15 ---++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-


WRDMW0 00000031
WRDMW0 00000032


ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++++++++++++++X++++++S+++++++++++++++++++++++++

Decompressing...done


CFE for Foxconn Router R6300v2 version: v1.0.15
Build Date: Fri May 24 13:47:09 CST 2013
Init Arena
Init Devs.
Boot up from NAND flash...
Boot partition size = 262144(0x40000)
DDR Clock: 533 MHz
Info: DDR frequency set from clkfreq=800,*533*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.2002 (r382208)
CPU type 0x0: 800MHz
Tot mem: 262144 KBytes

Device eth0:  hwaddr C4-04-15-0F-BE-8A, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ..... 5040352 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x380000
nflash: squash filesystem with lzma found at block 44
Creating 16 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000000220000 : "board_data"
0x000000220000-0x000000240000 : "POT1"
0x000000240000-0x000000260000 : "POT2"
0x000000260000-0x000000280000 : "T_Meter1"
0x000000280000-0x0000002a0000 : "T_Meter2"
0x0000002a0000-0x0000002c0000 : "ML1"
0x0000002c0000-0x0000002e0000 : "ML2"
0x0000002e0000-0x000000300000 : "ML3"
0x000000300000-0x000000320000 : "ML4"
0x000000320000-0x000000340000 : "ML5"
0x000000340000-0x000000360000 : "ML6"
0x000000360000-0x000000380000 : "ML7"
0x000000380000-0x000002180000 : "linux"
0x00000058ca34-0x000002180000 : "rootfs"
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0a.1: EHCI Host Controller
ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0a.1: irq 111, io mem 0x18021000
ehci_hcd 0000:00:0a.1: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0a.0: OHCI Host Controller
ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0a.0: irq 111, io mem 0x18022000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:0b.0: xHCI Host Controller
xhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:0b.0: irq 112, io mem 0x18023000
xhci_hcd 0000:00:0b.0: Failed to enable MSI-X
xhci_hcd 0000:00:0b.0: failed to allocate MSI entry
usb usb3: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
u32 classifier
    Actions configured
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Spare area=64 eccbytes 56, ecc bytes located at:
 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Bad eraseblock 246 at 0x000001ec0000
Bad eraseblock 400 at 0x000003200000
Bad eraseblock 513 at 0x000004020000
Options: NO_AUTOINCR,NO_PADDING,CACHEPRG,COPYBACK,NO_READRDY,BBT_SCAN2NDPAGE,
Creating 1 MTD partitions on "brcmnand":
0x000002180000-0x000008000000 : "brcmnand"
SQUASHFS error: Xattrs in filesystem, these will be ignored
VFS: Mounted root (squashfs filesystem) readonly on device 31:15.
devtmpfs: mounted
Freeing init memory: 220K
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Reading board data...
WSC UUID: 0x889e6a49e83cb1de39f1acc8fd7a27da
NTP synchronized date/time: Wed Aug  6 04:09:18 2014
MAC address of 1st STA connected: B4-B6-76-FA-12-48
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
invalid RF magic!
No RF parameters! Use default.
### main:1226 Set Normal Power!
Initialise conn table 2048 entries
Commit new ethernet config...
Doing nvram commit by pid 1 !
insmod: proxyarp.ko: no module by that name found
insmod: usbcore.ko: no module by that name found
insmod: ehci-hcd.ko: no module by that name found
insmod: wl_high.ko: no module by that name found
eth3: cmd=14: No such device
wl1 not up in 3 sec
Hit enter to continue...WARNING: console log level set to 1
killall: upnp: no process killed
upnp: No such file or directory
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed

### wps_wfi_init(): <wl0_wfi_enable=(null)><wl1_wfi_enable=(null)>WFI is not enabled ###
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: selected channel spec: 0x1808
Reading board data...
WSC UUID: 0x889e6a49e83cb1de39f1acc8fd7a27da
acsd: scan in progress ...
cp: cannot stat '/usr/config/netatalk/AppleVolumes.default': No such file or directory
cp: cannot stat '/usr/config/avahi/services/http.service': No such file or directory
cp: cannot stat '/usr/config/avahi/services/smbd.service': No such file or directory
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
acsd: scan in progress ...
sh: avahi-daemon: not found
acsd: scan in progress ...
interface br0 IP address is 192.168.1.1
acsd: scan in progress ...
info, udhcp server (v0.9.8) started
error, unable to parse 'option wins '
error, unable to parse 'option domain '
sh: /sbin/tmd: not found
mevent start...
opened loopback socket 3
acsd: scan in progress ...
acsd: scan in progress ...
shm ID: 32769
 Get a correct Segment_ID: 32769 and semaphore ID:32769
Can't find handler for ASP command: wlg_cgi_get_isolation_status(0);
Can't find handler for ASP command: wlg_cgi_get_isolation_status(1);
Can't find handler for ASP command: eco_get_redirect_link();
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_control");
Can't find handler for ASP command: devices_cgi_get_acl_white_table();
Can't find handler for ASP command: devices_cgi_get_acl_black_table();
Can't find handler for ASP command: devices_cgi_get_show_access_ctrl_settings();
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_device", "wired");
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_device", "wireless");
Can't find handler for ASP command: wlg_cgi_get_isolation_status();
Can't find handler for ASP command: qos_cgi_get_bandwidth("ToSet_qos_bw_uplink");
Can't find handler for ASP command: qos_cgi_get_bandwidth();
POT integrity check OK.
POT time is up.
Can't find handler for ASP command: usb_cgi_get_register_state();
Can't find handler for ASP command: usb_cgi_get_invite_state();
acsd: scan in progress ...
Can't find handler for ASP command: cdl_cgi_set_hijack(0);
open /tmp/2g_chek_stat fail
open /tmp/5g_chek_stat fail
Can't find handler for ASP command: cdl_cgi_set_hijack(1);
acsd: scan in progress ...
acsd: selected channel spec: 0x1808
Info: No FWPT default policies.
agnat QOS disable!
rmmod: l7_filter: No such file or directory
error open: /etc/netatalk/AppleVolumes.default
/tmp/samba/private/smb.conf: no files!
add active user:192.168.1.3
httpd: ipv6 socket bound in 80.
httpd: socket bound in 0.0.0.0:443.
insmod: usbcore.ko: no module by that name found
insmod: ehci-hcd.ko: no module by that name found
insmod: ohci-hcd.ko: no module by that name found
insmod: usb-storage.ko: no module by that name found
mount: mounting none on /proc/bus/usb failed: Device or resource busy
IOCTL_AG_REGION_SET: English
Start DHCP client daemon
info, udhcp client (v0.9.8) started
eth0: No such process
minidlan :scan files




minidlan:scan finished


route: ioctl 0x890c failed: No such process
killall: dhcp6c: no process killed
killall: IPv6-relay: no process killed
killall: pppdv6: no process killed
killall: rtsol: no process killed
killall: dhcp6s: no process killed
killall: radvd: no process killed
route: ioctl 0x890c failed: No such process
killall: dhcp6s: no process killed
killall: radvd: no process killed
killall: cwmpCPE: no process killed
Hit enter to continue...[wan_ipaddr=0.0.0.0]
[wan_ipaddr=0.0.0.0]
send_inform:(285) status = 20
#0 (0x128008)->0x0:     180 sec 0 usec  0xbab0
Doing nvram commit by pid 2796 !
Socket connection successful 3



BusyBox v1.7.2 (2014-04-04 01:41:45 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

#