HELLO! BOOT0 is starting!
boot0 version : 4.0.0
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V0.8
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 672 MHz
DRAM zq value: 003b3bfb
READ DQS LCDL = 001d1c1c
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2014-12-10 21:20:39
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 7636MB
[mmc]: vendor: Man 00824a54 Snr 26b007ca
[mmc]: product: NCard
[mmc]: revision: 1.0
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000dc000.
sum=ede66ee7
src_sum=ede66ee7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[      0.346]e mode

U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology

[      0.353]version: 1.1.0
normal mode
[      0.360]pmbus:   ready
not set main pmu id
axp_probe error
[      0.375]PMU: pll1 1200 Mhz,PLL6=600 Mhz
AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[      0.405]DRAM:  1 GiB
relocation Offset is: 35af9000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC:	 0
[      0.479][mmc]: mmc driver ver 2014-12-10 9:23:00
[      0.484][mmc]: get sdc_phy_wipe fail.
[      0.488][mmc]: get sdc0 sdc_erase fail.
[      0.492][mmc]: get sdc_f_max fail,use default 50000000Hz
[      0.497][mmc]: get sdc_ex_dly_used fail,use default dly
[      0.503][mmc]: SUNXI SD/MMC: 0
[      0.516][mmc]: *Try SD card 0*
[      0.549][mmc]: CID 0x824a544e 0x43617264 0x1026b007 0xca00ec7d
[      0.554][mmc]: mmc clk 50000000
[      0.558][mmc]: SD/MMC Card: 4bit, capacity: 7636MB
[      0.563][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[      0.568][mmc]: ***SD/MMC 0 init OK!!!***
[      0.572][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[      0.578][mmc]: secure_feature 0x0
[      0.581][mmc]: secure_removal_type  0x0
[      0.585]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
boot_disp.auto_hpd=1
auto hpd check has 0 times!
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
attched ok, mgr0<-->device0, type=4, mode=4----
ready to set mode
[      1.466]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
fail to find part named env
Using default environment

In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
mbr not exist
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
no misc partition is found
to be run cmd=run setargs_mmc boot_normal
[      1.504][mmc]: MMC Device 2 not found
[      1.508][mmc]: Can not find mmc dev
[      1.511][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1849
sunxi_secstorage_read fail
get secure storage map err
the private part isn't exist
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
[disk_read_fs] no the partition
error: open bootlogit is noist
sunbmp infoor : una to openo file blogo.bmp     1.5Hit any to stop oboot:  0
su
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#
sunxi#fatls
usage: fatls <interface> <dev[:part]> [directory]
sunxi#fatls mmc 0:1
 11481556   kimage
 11481556   kimage
    34988   2script.bin
  7938048   modloop-sunxi
            backup/
      536   boot.scr
  7938112   loop
     2727   unzip.sh
 10916088   kernel
    35916   script.bin
    15746   dtb
 23479915   initramfs

11 file(s), 1 dir(s)

sunxi#
 11481556   kimage
 11481556   kimage
    34988   2script.bin
  7938048   modloop-sunxi
            backup/
      536   boot.scr
  7938112   loop
     2727   unzip.sh
 10916088   kernel
    35916   script.bin
    15746   dtb
 23479915   initramfs

11 file(s), 1 dir(s)

sunxi#fatload mmc 0:1 0x42000000 kimage
[     23.822][mmc]: blkcnt should not be 0
sunxi#fatload mmc 0:1 0x45000000 ini<INTERRUPT>
sunxi#<INTERRUPT>
sunxi#<INTERRUPT>
sunxi#<INTERRUPT>
sunxi#<INTERRUPT>
sunxi#
sunxi#fatload mmc 0:1 0x42000000 kimage
[     35.769][mmc]: blkcnt should not be 0
sunxi#fatload mmc 0:1 0x45000000 initramfs
[     36.792][mmc]: blkcnt should not be 0
sunxi#fatload mmc 0:1 0x55000000 dtb
[     42.623][mmc]: blkcnt should not be 0
sunxi#bootm 0x42000000 0x45000000 0x55000000
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   Linux kernel
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    11481492 Bytes = 10.9 MiB
   Load Address: 40080000
   Entry Point:  40080000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 45000000 ...
   Image Name:   initramfs-sunxi
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    23479851 Bytes = 22.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
[     48.444][mmc]: MMC Device 2 not found
[     48.448][mmc]:  mmc  not find,so not exit
[     48.452]
Starting kernel ...