Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ~$ cat /tmp/dmesg_eden_beta3
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.0-15-generic (buildd@zirconium) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #26-Ubuntu SMP Fri Jan 20 15:59:53 UTC 2012 (Ubuntu 3.0.0-15.26-generic 3.0.13)
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
- [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
- [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf3000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cfdf3000 - 00000000cfe00000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
- [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
- [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770T-D3L/GA-770T-D3L, BIOS F4 10/18/2010
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-C7FFF write-protect
- [ 0.000000] C8000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
- [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
- [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back
- [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back
- [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000230000000 aka 8960M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] original variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
- [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
- [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
- [ 0.000000] reg 5, base: 8GB, range: 512MB, type WB
- [ 0.000000] reg 6, base: 8704MB, range: 256MB, type WB
- [ 0.000000] total RAM covered: 3326M
- [ 0.000000] Found optimal setting for mtrr clean up
- [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 4 lose cover RAM: 0G
- [ 0.000000] New variable MTRRs
- [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
- [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
- [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB
- [ 0.000000] reg 3, base: 3326MB, range: 2MB, type UC
- [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] found SMP MP-table at [c00f41c0] f41c0
- [ 0.000000] initial memory mapped : 0 - 01c00000
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037400000 page 2M
- [ 0.000000] 0037400000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
- [ 0.000000] RAMDISK: 7f228000 - 80000000
- [ 0.000000] Allocated new RAMDISK: 36a26000 - 377fdffd
- [ 0.000000] Move RAMDISK from 000000007f228000 - 000000007ffffffc to 36a26000 - 377fdffc
- [ 0.000000] ACPI: RSDP 000f5bf0 00014 (v00 GBT )
- [ 0.000000] ACPI: RSDT cfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: FACP cfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: DSDT cfdf30c0 071B9 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
- [ 0.000000] ACPI: FACS cfdf0000 00040
- [ 0.000000] ACPI: SSDT cfdfa340 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
- [ 0.000000] ACPI: HPET cfdfac40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
- [ 0.000000] ACPI: MCFG cfdfac80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: APIC cfdfa280 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2437MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x000cfdf0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000cfdf0
- [ 0.000000] On node 0 totalpages: 851327
- [ 0.000000] free_area_init_node: node 0, pgdat c17b5400, node_mem_map f5025200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4876 pages used for memmap
- [ 0.000000] HighMem zone: 619238 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 8 CPUs, 5 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @f4c00000 s26240 r0 d22912 u524288
- [ 0.000000] pcpu-alloc: s26240 r0 d22912 u524288 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844675
- [ 0.000000] Kernel command line: boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] allocated 13622784 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfdf0)
- [ 0.000000] Memory: 3340392k/3405760k available (5336k kernel code, 64916k reserved, 2599k data, 696k init, 2496456k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
- [ 0.000000] .data : 0xc1536144 - 0xc17c0080 (2599 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1536144 (5336 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:2304 nr_irqs:744 16
- [ 0.000000] CPU 0 irqstacks, hard=f380a000 soft=f380c000
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 3214.211 MHz processor.
- [ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.42 BogoMIPS (lpj=12856844)
- [ 0.008007] pid_max: default: 32768 minimum: 301
- [ 0.008025] Security Framework initialized
- [ 0.008038] AppArmor: AppArmor initialized
- [ 0.008039] Yama: becoming mindful.
- [ 0.008083] Mount-cache hash table entries: 512
- [ 0.008180] Initializing cgroup subsys cpuacct
- [ 0.008184] Initializing cgroup subsys memory
- [ 0.008190] Initializing cgroup subsys devices
- [ 0.008192] Initializing cgroup subsys freezer
- [ 0.008194] Initializing cgroup subsys net_cls
- [ 0.008196] Initializing cgroup subsys blkio
- [ 0.008202] Initializing cgroup subsys perf_event
- [ 0.008221] CPU: Physical Processor ID: 0
- [ 0.008222] CPU: Processor Core ID: 0
- [ 0.008225] mce: CPU supports 6 MCE banks
- [ 0.008232] using AMD E400 aware idle routine
- [ 0.012216] ACPI: Core revision 20110413
- [ 0.016023] ftrace: allocating 24882 entries in 49 pages
- [ 0.020057] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.020613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.061847] CPU0: AMD Athlon(tm) II X3 450 Processor stepping 03
- [ 0.064003] Performance Events: AMD PMU driver.
- [ 0.064003] ... version: 0
- [ 0.064003] ... bit width: 48
- [ 0.064003] ... generic registers: 4
- [ 0.064003] ... value mask: 0000ffffffffffff
- [ 0.064003] ... max period: 00007fffffffffff
- [ 0.064003] ... fixed-purpose events: 0
- [ 0.064003] ... event mask: 000000000000000f
- [ 0.064003] CPU 1 irqstacks, hard=f38b8000 soft=f38ba000
- [ 0.064003] Booting Node 0, Processors #1
- [ 0.064003] smpboot cpu 1: start_ip = 9b000
- [ 0.012000] Initializing CPU#1
- [ 0.152018] System has AMD C1E enabled
- [ 0.152031] Switch to broadcast mode on CPU1
- [ 0.152055] CPU 2 irqstacks, hard=f38e2000 soft=f38e4000
- [ 0.152057] #2
- [ 0.152058] smpboot cpu 2: start_ip = 9b000
- [ 0.012000] Initializing CPU#2
- [ 0.244023] Brought up 3 CPUs
- [ 0.244025] Total of 3 processors activated (19285.77 BogoMIPS).
- [ 0.244024] Switch to broadcast mode on CPU2
- [ 0.244485] Switch to broadcast mode on CPU0
- [ 0.244485] devtmpfs: initialized
- [ 0.244485] PM: Registering ACPI NVS region at cfdf0000 (12288 bytes)
- [ 0.245324] print_constraints: dummy:
- [ 0.245345] Time: 20:37:34 Date: 02/23/12
- [ 0.245373] NET: Registered protocol family 16
- [ 0.245446] EISA bus registered
- [ 0.245449] node 0 link 0: io port [c000, ffff]
- [ 0.245452] TOM: 00000000d0000000 aka 3328M
- [ 0.245453] Fam 10h mmconf [e0000000, e00fffff]
- [ 0.245455] node 0 link 0: mmio [a0000, bffff]
- [ 0.245457] node 0 link 0: mmio [d0000000, dfffffff]
- [ 0.245459] node 0 link 0: mmio [f0000000, fe02ffff]
- [ 0.245461] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
- [ 0.245464] TOM2: 0000000230000000 aka 8960M
- [ 0.245465] bus: [00, 03] on node 0 link 0
- [ 0.245467] bus: 00 index 0 [io 0x0000-0xffff]
- [ 0.245469] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
- [ 0.245471] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
- [ 0.245472] bus: 00 index 3 [mem 0xe0400000-0xffffffff]
- [ 0.245473] bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
- [ 0.245482] Extended Config Space enabled on 1 nodes
- [ 0.245489] ACPI: bus type pci registered
- [ 0.245380] Trying to unpack rootfs image as initramfs...
- [ 0.245529] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.245532] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.245533] PCI: Using MMCONFIG for extended config space
- [ 0.245534] PCI: Using configuration type 1 for base access
- [ 0.246034] bio: create slab <bio-0> at 0
- [ 0.246034] ACPI: EC: Look up EC in DSDT
- [ 0.247131] ACPI: Interpreter enabled
- [ 0.247135] ACPI: (supports S0 S3 S4 S5)
- [ 0.247147] ACPI: Using IOAPIC for interrupt routing
- [ 1.669783] ACPI: No dock devices found.
- [ 1.669786] HEST: Table not found.
- [ 1.669789] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 1.669827] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 1.669901] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- [ 1.669903] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- [ 1.669905] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 1.669907] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
- [ 1.669909] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
- [ 1.669921] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
- [ 1.669931] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
- [ 1.669956] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
- [ 1.669977] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 1.669979] pci 0000:00:02.0: PME# disabled
- [ 1.669997] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
- [ 1.670018] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
- [ 1.670020] pci 0000:00:0a.0: PME# disabled
- [ 1.670044] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
- [ 1.670062] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
- [ 1.670070] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
- [ 1.670079] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
- [ 1.670088] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
- [ 1.670097] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
- [ 1.670106] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
- [ 1.670125] pci 0000:00:11.0: set SATA to AHCI mode
- [ 1.670156] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
- [ 1.670168] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
- [ 1.670226] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
- [ 1.670239] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
- [ 1.670302] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
- [ 1.670320] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
- [ 1.670385] pci 0000:00:12.2: supports D1 D2
- [ 1.670387] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 1.670390] pci 0000:00:12.2: PME# disabled
- [ 1.670409] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
- [ 1.670421] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
- [ 1.670480] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
- [ 1.670492] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
- [ 1.670555] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
- [ 1.670573] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
- [ 1.670638] pci 0000:00:13.2: supports D1 D2
- [ 1.670640] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 1.670643] pci 0000:00:13.2: PME# disabled
- [ 1.670665] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
- [ 1.670750] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
- [ 1.670766] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
- [ 1.670774] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
- [ 1.670783] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
- [ 1.670792] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
- [ 1.670800] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
- [ 1.670845] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
- [ 1.670865] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
- [ 1.670919] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 1.670923] pci 0000:00:14.2: PME# disabled
- [ 1.670934] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
- [ 1.671003] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
- [ 1.671040] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
- [ 1.671052] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
- [ 1.671113] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
- [ 1.671125] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
- [ 1.671135] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
- [ 1.671145] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
- [ 1.671157] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
- [ 1.671199] pci 0000:01:00.0: [1002:6779] type 0 class 0x000300
- [ 1.671212] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 1.671222] pci 0000:01:00.0: reg 18: [mem 0xfdfc0000-0xfdfdffff 64bit]
- [ 1.671229] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
- [ 1.671242] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
- [ 1.671259] pci 0000:01:00.0: supports D1 D2
- [ 1.671279] pci 0000:01:00.1: [1002:aa98] type 0 class 0x000403
- [ 1.671292] pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
- [ 1.671337] pci 0000:01:00.1: supports D1 D2
- [ 1.680136] pci 0000:00:02.0: PCI bridge to [bus 01-01]
- [ 1.680141] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 1.680144] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 1.680147] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 1.680182] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
- [ 1.680195] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
- [ 1.680214] pci 0000:02:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
- [ 1.680227] pci 0000:02:00.0: reg 20: [mem 0xfdcf8000-0xfdcfbfff 64bit pref]
- [ 1.680262] pci 0000:02:00.0: supports D1 D2
- [ 1.680263] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 1.680267] pci 0000:02:00.0: PME# disabled
- [ 1.692136] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
- [ 1.692141] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
- [ 1.692143] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
- [ 1.692146] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
- [ 1.692184] pci 0000:03:06.0: [14f1:8800] type 0 class 0x000400
- [ 1.692207] pci 0000:03:06.0: reg 10: [mem 0xf8000000-0xf8ffffff]
- [ 1.692314] pci 0000:03:06.1: [14f1:8801] type 0 class 0x000480
- [ 1.692334] pci 0000:03:06.1: reg 10: [mem 0xfb000000-0xfbffffff]
- [ 1.692430] pci 0000:03:06.2: [14f1:8802] type 0 class 0x000480
- [ 1.692450] pci 0000:03:06.2: reg 10: [mem 0xfa000000-0xfaffffff]
- [ 1.692548] pci 0000:03:06.4: [14f1:8804] type 0 class 0x000480
- [ 1.692568] pci 0000:03:06.4: reg 10: [mem 0xf9000000-0xf9ffffff]
- [ 1.692669] pci 0000:03:07.0: [10ec:8185] type 0 class 0x000200
- [ 1.692689] pci 0000:03:07.0: reg 10: [io 0xce00-0xceff]
- [ 1.692701] pci 0000:03:07.0: reg 14: [mem 0xfcfff000-0xfcfff3ff]
- [ 1.692773] pci 0000:03:07.0: supports D1 D2
- [ 1.692774] pci 0000:03:07.0: PME# supported from D1 D2 D3hot D3cold
- [ 1.692779] pci 0000:03:07.0: PME# disabled
- [ 1.692821] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
- [ 1.692824] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 1.692828] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfcffffff]
- [ 1.692832] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
- [ 1.692834] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 1.692835] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 1.692837] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 1.692839] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
- [ 1.692841] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
- [ 1.692851] pci_bus 0000:00: on NUMA node 0
- [ 1.692856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 1.693043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
- [ 1.693078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
- [ 1.693107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
- [ 1.693131] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 1.693133] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 1.693134] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 1.701786] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.701815] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.701842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.701868] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.701894] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.701920] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.701945] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.701971] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
- [ 1.702045] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 1.702049] vgaarb: loaded
- [ 1.702050] vgaarb: bridge control possible 0000:01:00.0
- [ 1.702188] SCSI subsystem initialized
- [ 1.704137] libata version 3.00 loaded.
- [ 1.704176] usbcore: registered new interface driver usbfs
- [ 1.704185] usbcore: registered new interface driver hub
- [ 1.704189] usbcore: registered new device driver usb
- [ 1.704189] PCI: Using ACPI for IRQ routing
- [ 1.710719] PCI: pci_cache_line_size set to 64 bytes
- [ 1.710727] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
- [ 1.710805] reserve RAM buffer: 000000000009f800 - 000000000009ffff
- [ 1.710807] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff
- [ 1.710874] NetLabel: Initializing
- [ 1.710876] NetLabel: domain hash size = 128
- [ 1.710877] NetLabel: protocols = UNLABELED CIPSOv4
- [ 1.710884] NetLabel: unlabeled traffic allowed by default
- [ 1.710921] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 1.710925] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
- [ 1.712134] Switching to clocksource hpet
- [ 1.862930] Switched to NOHz mode on CPU #2
- [ 1.862934] Switched to NOHz mode on CPU #1
- [ 1.862939] Switched to NOHz mode on CPU #0
- [ 1.864318] AppArmor: AppArmor Filesystem Enabled
- [ 1.864338] pnp: PnP ACPI init
- [ 1.864350] ACPI: bus type pnp registered
- [ 1.864419] pnp 00:00: [bus 00-ff]
- [ 1.864421] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 1.864423] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 1.864424] pnp 00:00: [io 0x0d00-0xffff window]
- [ 1.864426] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 1.864428] pnp 00:00: [mem 0x000c0000-0x000dffff window]
- [ 1.864429] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
- [ 1.864465] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 1.864473] pnp 00:01: [io 0x0010-0x001f]
- [ 1.864474] pnp 00:01: [io 0x0022-0x003f]
- [ 1.864475] pnp 00:01: [io 0x0044-0x005f]
- [ 1.864477] pnp 00:01: [io 0x0062-0x0063]
- [ 1.864478] pnp 00:01: [io 0x0065-0x006f]
- [ 1.864479] pnp 00:01: [io 0x0074-0x007f]
- [ 1.864481] pnp 00:01: [io 0x0091-0x0093]
- [ 1.864482] pnp 00:01: [io 0x00a2-0x00bf]
- [ 1.864483] pnp 00:01: [io 0x00e0-0x00ef]
- [ 1.864485] pnp 00:01: [io 0x04d0-0x04d1]
- [ 1.864486] pnp 00:01: [io 0x0220-0x0225]
- [ 1.864487] pnp 00:01: [io 0x0290-0x0294]
- [ 1.864528] system 00:01: [io 0x04d0-0x04d1] has been reserved
- [ 1.864530] system 00:01: [io 0x0220-0x0225] has been reserved
- [ 1.864532] system 00:01: [io 0x0290-0x0294] has been reserved
- [ 1.864534] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.298930] Freeing initrd memory: 14176k freed
- [ 2.356284] pnp 00:02: [io 0x4100-0x411f]
- [ 2.356287] pnp 00:02: [io 0x0228-0x022f]
- [ 2.356289] pnp 00:02: [io 0x040b]
- [ 2.356290] pnp 00:02: [io 0x04d6]
- [ 2.356292] pnp 00:02: [io 0x0c00-0x0c01]
- [ 2.356293] pnp 00:02: [io 0x0c14]
- [ 2.356294] pnp 00:02: [io 0x0c50-0x0c52]
- [ 2.356295] pnp 00:02: [io 0x0c6c-0x0c6d]
- [ 2.356297] pnp 00:02: [io 0x0c6f]
- [ 2.356298] pnp 00:02: [io 0x0cd0-0x0cd1]
- [ 2.356299] pnp 00:02: [io 0x0cd2-0x0cd3]
- [ 2.356300] pnp 00:02: [io 0x0cd4-0x0cdf]
- [ 2.356302] pnp 00:02: [io 0x4000-0x40fe]
- [ 2.356303] pnp 00:02: [io 0x4210-0x4217]
- [ 2.356304] pnp 00:02: [io 0x0b00-0x0b0f]
- [ 2.356306] pnp 00:02: [io 0x0b10-0x0b1f]
- [ 2.356307] pnp 00:02: [io 0x0b20-0x0b3f]
- [ 2.356309] pnp 00:02: [mem 0x00000000-0x00000fff window]
- [ 2.356310] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
- [ 2.356316] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 2.356339] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
- [ 2.356382] system 00:02: [io 0x4100-0x411f] has been reserved
- [ 2.356384] system 00:02: [io 0x0228-0x022f] has been reserved
- [ 2.356386] system 00:02: [io 0x040b] has been reserved
- [ 2.356388] system 00:02: [io 0x04d6] has been reserved
- [ 2.356389] system 00:02: [io 0x0c00-0x0c01] has been reserved
- [ 2.356391] system 00:02: [io 0x0c14] has been reserved
- [ 2.356393] system 00:02: [io 0x0c50-0x0c52] has been reserved
- [ 2.356394] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
- [ 2.356396] system 00:02: [io 0x0c6f] has been reserved
- [ 2.356398] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
- [ 2.356399] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
- [ 2.356401] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
- [ 2.356403] system 00:02: [io 0x4000-0x40fe] has been reserved
- [ 2.356404] system 00:02: [io 0x4210-0x4217] has been reserved
- [ 2.356406] system 00:02: [io 0x0b00-0x0b0f] has been reserved
- [ 2.356408] system 00:02: [io 0x0b10-0x0b1f] has been reserved
- [ 2.356409] system 00:02: [io 0x0b20-0x0b3f] has been reserved
- [ 2.356412] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
- [ 2.356415] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.356485] pnp 00:03: [dma 4]
- [ 2.356486] pnp 00:03: [io 0x0000-0x000f]
- [ 2.356488] pnp 00:03: [io 0x0080-0x0090]
- [ 2.356489] pnp 00:03: [io 0x0094-0x009f]
- [ 2.356490] pnp 00:03: [io 0x00c0-0x00df]
- [ 2.356508] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 2.356530] pnp 00:04: [irq 0 disabled]
- [ 2.356540] pnp 00:04: [irq 8]
- [ 2.356542] pnp 00:04: [mem 0xfed00000-0xfed003ff]
- [ 2.356560] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 2.356577] pnp 00:05: [io 0x0070-0x0073]
- [ 2.356594] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 2.356599] pnp 00:06: [io 0x0061]
- [ 2.356618] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 2.356623] pnp 00:07: [io 0x00f0-0x00ff]
- [ 2.356630] pnp 00:07: [irq 13]
- [ 2.356648] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 2.356842] pnp 00:08: [io 0x03f8-0x03ff]
- [ 2.356849] pnp 00:08: [irq 4]
- [ 2.356887] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 2.357018] pnp 00:09: [io 0x0378-0x037f]
- [ 2.357025] pnp 00:09: [irq 7]
- [ 2.357057] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 2.357132] pnp 00:0a: [mem 0xe0000000-0xefffffff]
- [ 2.357166] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
- [ 2.357168] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 2.357244] pnp 00:0b: [mem 0x000f0000-0x000f3fff]
- [ 2.357245] pnp 00:0b: [mem 0x000f4000-0x000f7fff]
- [ 2.357247] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
- [ 2.357248] pnp 00:0b: [mem 0x000fc000-0x000fffff]
- [ 2.357250] pnp 00:0b: [mem 0xcfdf0000-0xcfdfffff]
- [ 2.357251] pnp 00:0b: [mem 0xffff0000-0xffffffff]
- [ 2.357253] pnp 00:0b: [mem 0x00000000-0x0009ffff]
- [ 2.357254] pnp 00:0b: [mem 0x00100000-0xcfdeffff]
- [ 2.357256] pnp 00:0b: [mem 0xcfe00000-0xcfefffff]
- [ 2.357257] pnp 00:0b: [mem 0xcff00000-0xcfffffff]
- [ 2.357259] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
- [ 2.357260] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
- [ 2.357262] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
- [ 2.357265] pnp 00:0b: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 2.357268] pnp 00:0b: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 2.357270] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 2.357273] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 2.357276] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 2.357278] pnp 00:0b: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
- [ 2.357319] system 00:0b: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
- [ 2.357321] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
- [ 2.357323] system 00:0b: [mem 0xcfe00000-0xcfefffff] has been reserved
- [ 2.357325] system 00:0b: [mem 0xcff00000-0xcfffffff] could not be reserved
- [ 2.357327] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 2.357329] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
- [ 2.357331] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
- [ 2.357333] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 2.357347] pnp: PnP ACPI: found 12 devices
- [ 2.357348] ACPI: ACPI bus type pnp unregistered
- [ 2.357351] PnPBIOS: Disabled by ACPI PNP
- [ 2.392790] PCI: max bus depth: 1 pci_try_num: 2
- [ 2.392806] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
- [ 2.392808] pci 0000:00:02.0: PCI bridge to [bus 01-01]
- [ 2.392810] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
- [ 2.392813] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
- [ 2.392815] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 2.392818] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
- [ 2.392820] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
- [ 2.392822] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff]
- [ 2.392825] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
- [ 2.392828] pci 0000:00:14.4: PCI bridge to [bus 03-03]
- [ 2.392831] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
- [ 2.392836] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfcffffff]
- [ 2.392839] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
- [ 2.392857] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 2.392860] pci 0000:00:02.0: setting latency timer to 64
- [ 2.392864] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 2.392866] pci 0000:00:0a.0: setting latency timer to 64
- [ 2.392872] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 2.392874] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 2.392876] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 2.392877] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
- [ 2.392879] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
- [ 2.392881] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
- [ 2.392883] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
- [ 2.392884] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 2.392886] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- [ 2.392888] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
- [ 2.392890] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
- [ 2.392891] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
- [ 2.392893] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfcffffff]
- [ 2.392895] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
- [ 2.392896] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
- [ 2.392898] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
- [ 2.392900] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
- [ 2.392901] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
- [ 2.392903] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
- [ 2.392933] NET: Registered protocol family 2
- [ 2.392978] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 2.393116] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 2.393458] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 2.393629] TCP: Hash tables configured (established 131072 bind 65536)
- [ 2.393630] TCP reno registered
- [ 2.393632] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 2.393639] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 2.393716] NET: Registered protocol family 1
- [ 2.472154] pci 0000:01:00.0: Boot video device
- [ 2.472172] PCI: CLS 64 bytes, default 64
- [ 2.472493] audit: initializing netlink socket (disabled)
- [ 2.472500] type=2000 audit(1330029456.468:1): initialized
- [ 2.490193] highmem bounce pool size: 64 pages
- [ 2.490198] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 2.499492] VFS: Disk quotas dquot_6.5.2
- [ 2.499546] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 2.500072] fuse init (API version 7.16)
- [ 2.500150] msgmni has been set to 1676
- [ 2.500806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 2.500902] io scheduler noop registered
- [ 2.500905] io scheduler deadline registered
- [ 2.500931] io scheduler cfq registered (default)
- [ 2.501025] pcieport 0000:00:02.0: setting latency timer to 64
- [ 2.501050] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
- [ 2.501083] pcieport 0000:00:0a.0: setting latency timer to 64
- [ 2.501102] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
- [ 2.501145] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 2.501161] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 2.501247] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 2.501251] ACPI: Power Button [PWRB]
- [ 2.501281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 2.501283] ACPI: Power Button [PWRF]
- [ 2.501300] ACPI: acpi_idle registered with cpuidle
- [ 2.501318] ACPI: processor limited to max C-state 1
- [ 2.724750] ERST: Table is not found!
- [ 2.724803] isapnp: Scanning for PnP cards...
- [ 2.724825] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 2.745266] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 3.078530] isapnp: No Plug & Play device found
- [ 3.103082] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 3.103367] Linux agpgart interface v0.103
- [ 3.104314] brd: module loaded
- [ 3.104662] loop: module loaded
- [ 3.104790] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 3.105014] Fixed MDIO Bus: probed
- [ 3.105029] PPP generic driver version 2.4.2
- [ 3.105059] tun: Universal TUN/TAP device driver, 1.6
- [ 3.105060] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.105109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.105125] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 3.105137] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 3.105157] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 3.105164] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 3.105183] ehci_hcd 0000:00:12.2: debug port 1
- [ 3.105208] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
- [ 3.116077] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 3.116187] hub 1-0:1.0: USB hub found
- [ 3.116190] hub 1-0:1.0: 6 ports detected
- [ 3.116261] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 3.116274] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 3.116298] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 3.116305] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 3.116323] ehci_hcd 0000:00:13.2: debug port 1
- [ 3.116349] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
- [ 3.128076] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 3.128185] hub 2-0:1.0: USB hub found
- [ 3.128188] hub 2-0:1.0: 6 ports detected
- [ 3.128247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.128260] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 3.128276] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 3.128303] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 3.128331] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
- [ 3.188225] hub 3-0:1.0: USB hub found
- [ 3.188231] hub 3-0:1.0: 3 ports detected
- [ 3.188287] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 3.188300] ohci_hcd 0000:00:12.1: OHCI Host Controller
- [ 3.188323] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
- [ 3.188338] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
- [ 3.248165] hub 4-0:1.0: USB hub found
- [ 3.248171] hub 4-0:1.0: 3 ports detected
- [ 3.248227] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 3.248241] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 3.248267] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 3.248297] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
- [ 3.308164] hub 5-0:1.0: USB hub found
- [ 3.308170] hub 5-0:1.0: 3 ports detected
- [ 3.308225] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 3.308238] ohci_hcd 0000:00:13.1: OHCI Host Controller
- [ 3.308261] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
- [ 3.308276] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
- [ 3.368178] hub 6-0:1.0: USB hub found
- [ 3.368184] hub 6-0:1.0: 3 ports detected
- [ 3.368240] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 3.368254] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 3.368278] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
- [ 3.368293] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
- [ 3.428163] hub 7-0:1.0: USB hub found
- [ 3.428169] hub 7-0:1.0: 2 ports detected
- [ 3.428222] uhci_hcd: USB Universal Host Controller Interface driver
- [ 3.428282] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 3.460935] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
- [ 3.460937] i8042: If AUX port is really absent please use the 'i8042.noaux' option
- [ 3.472078] Refined TSC clocksource calibration: 3214.334 MHz.
- [ 3.472088] Switching to clocksource tsc
- [ 3.644060] usb 5-1: new full speed USB device number 2 using ohci_hcd
- [ 3.712155] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 3.712254] mousedev: PS/2 mouse device common for all mice
- [ 3.712332] rtc_cmos 00:05: RTC can wake from S4
- [ 3.712405] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 3.712434] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 3.712506] device-mapper: uevent: version 1.0.3
- [ 3.712552] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 3.712573] EISA: Probing bus 0 at eisa.0
- [ 3.712575] EISA: Cannot allocate resource for mainboard
- [ 3.712576] Cannot allocate resource for EISA slot 1
- [ 3.712577] Cannot allocate resource for EISA slot 2
- [ 3.712578] Cannot allocate resource for EISA slot 3
- [ 3.712579] Cannot allocate resource for EISA slot 4
- [ 3.712581] Cannot allocate resource for EISA slot 5
- [ 3.712582] Cannot allocate resource for EISA slot 6
- [ 3.712583] Cannot allocate resource for EISA slot 7
- [ 3.712584] Cannot allocate resource for EISA slot 8
- [ 3.712585] EISA: Detected 0 cards.
- [ 3.712591] cpufreq-nforce2: No nForce2 chipset.
- [ 3.712593] cpuidle: using governor ladder
- [ 3.712594] cpuidle: using governor menu
- [ 3.712596] EFI Variables Facility v0.08 2004-May-17
- [ 3.712764] TCP cubic registered
- [ 3.712846] NET: Registered protocol family 10
- [ 3.713210] NET: Registered protocol family 17
- [ 3.713222] Registering the dns_resolver key type
- [ 3.713237] Using IPI No-Shortcut mode
- [ 3.713286] PM: Hibernation image not present or could not be loaded.
- [ 3.713293] registered taskstats version 1
- [ 3.722393] Magic number: 0:407:650
- [ 3.722410] tty ttyprintk: hash matches
- [ 3.722441] processor LNXCPU:03: hash matches
- [ 3.722482] rtc_cmos 00:05: setting system clock to 2012-02-23 20:37:38 UTC (1330029458)
- [ 3.722488] powernow-k8: Found 1 AMD Athlon(tm) II X3 450 Processor (3 cpu cores) (version 2.20.00)
- [ 3.722512] powernow-k8: 0 : pstate 0 (3200 MHz)
- [ 3.722513] powernow-k8: 1 : pstate 1 (2500 MHz)
- [ 3.722515] powernow-k8: 2 : pstate 2 (2000 MHz)
- [ 3.722516] powernow-k8: 3 : pstate 3 (800 MHz)
- [ 3.722689] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 3.722691] EDD information not available.
- [ 3.722796] Freeing unused kernel memory: 696k freed
- [ 3.722960] Write protecting the kernel text: 5340k
- [ 3.722988] Write protecting the kernel read-only data: 2192k
- [ 3.741698] udevd[89]: starting version 173
- [ 3.763503] ahci 0000:00:11.0: version 3.0
- [ 3.763527] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 3.763623] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- [ 3.763626] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
- [ 3.770348] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 3.770364] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 3.770391] r8169 0000:02:00.0: setting latency timer to 64
- [ 3.771124] scsi0 : ahci
- [ 3.771841] scsi1 : ahci
- [ 3.772088] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
- [ 3.772418] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xf8036000, 1c:6f:65:bf:04:d9, XID 0c200000 IRQ 42
- [ 3.772434] scsi2 : ahci
- [ 3.772590] scsi3 : ahci
- [ 3.772678] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
- [ 3.772681] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
- [ 3.772684] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
- [ 3.772687] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
- [ 3.777717] scsi4 : pata_atiixp
- [ 3.779906] scsi5 : pata_atiixp
- [ 3.780363] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
- [ 3.780366] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
- [ 3.791469] wmi: Mapper loaded
- [ 3.827261] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input2
- [ 3.827335] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-1/input0
- [ 3.832358] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input3
- [ 3.832469] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1/input1
- [ 3.832485] usbcore: registered new interface driver usbhid
- [ 3.832487] usbhid: USB HID core driver
- [ 3.947547] ata5.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
- [ 3.947551] ata5.00: 240121728 sectors, multi 16: LBA
- [ 3.960659] ata5.00: configured for UDMA/100
- [ 4.092074] ata3: SATA link down (SStatus 0 SControl 300)
- [ 4.092134] ata1: SATA link down (SStatus 0 SControl 300)
- [ 4.092169] ata4: SATA link down (SStatus 0 SControl 300)
- [ 4.264071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 4.264662] ata2.00: ATAPI: ATAPI iHOS104, WL0D, max UDMA/100
- [ 4.265503] ata2.00: configured for UDMA/100
- [ 4.270008] scsi 1:0:0:0: CD-ROM ATAPI iHOS104 WL0D PQ: 0 ANSI: 5
- [ 4.273756] sr0: scsi3-mmc drive: 10x/32x cd/rw xa/form2 cdda tray
- [ 4.273760] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 4.273866] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 4.273931] sr 1:0:0:0: Attached scsi generic sg0 type 5
- [ 4.274081] scsi 4:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
- [ 4.274170] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 4.274207] sd 4:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
- [ 4.274265] sd 4:0:0:0: [sda] Write Protect is off
- [ 4.274267] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.274293] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.282282] sda: sda1 sda2
- [ 4.282586] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 7.192041] Btrfs loaded
- [ 7.196552] xor: automatically using best checksumming function: pIII_sse
- [ 7.216007] pIII_sse : 13245.000 MB/sec
- [ 7.216012] xor: using function: pIII_sse (13245.000 MB/sec)
- [ 7.216409] device-mapper: dm-raid45: initialized v0.2594b
- [ 7.513863] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
- [ 7.513866] EXT4-fs (sda1): write access will be enabled during recovery
- [ 7.542868] EXT4-fs (sda1): recovery complete
- [ 7.543180] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 9.467939] ISO 9660 Extensions: Microsoft Joliet Level 3
- [ 9.544566] ISO 9660 Extensions: RRIP_1991A
- [ 10.293986] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 10.810234] aufs 2.1-standalone.tree-3.0-rcN-20110620
- [ 67.605561] udevd[992]: starting version 173
- [ 72.796194] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- [ 73.716108] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
- [ 73.716171] SP5100 TCO timer: mmio address 0xfec000f0 already in use
- [ 74.183863] cfg80211: Calling CRDA to update world regulatory domain
- [ 75.893768] parport_pc 00:09: reported by Plug and Play ACPI
- [ 75.893820] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 76.290443] Linux video capture interface: v2.00
- [ 78.085193] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 78.085196] Disabling lock debugging due to kernel taint
- [ 78.136143] [fglrx] Maximum main memory to use for locked dma buffers: 3126 MBytes.
- [ 78.136238] [fglrx] vendor: 1002 device: 6779 count: 1
- [ 78.136622] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
- [ 78.136633] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 78.136637] pci 0000:01:00.0: setting latency timer to 64
- [ 78.136947] [fglrx] Kernel PAT support is enabled
- [ 78.136962] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
- [ 78.876787] rtl8180 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 78.996938] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996941] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996943] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996945] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996947] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996949] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996950] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996952] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996953] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996955] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996956] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996958] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996960] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996961] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996963] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996965] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996966] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996968] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996969] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996971] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996972] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996974] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996975] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996977] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996979] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996980] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 78.996982] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 78.996984] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
- [ 79.007310] ppdev: user-space parallel port driver
- [ 79.591397] IR NEC protocol handler initialized
- [ 79.592343] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
- [ 79.592820] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
- [ 79.602197] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 79.602989] ieee80211 phy0: hwaddr 0018e760f448, RTL8185vD + rtl8225z2
- [ 79.605746] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
- [ 79.605749] cx88[0]: TV tuner type -1, Radio tuner type -1
- [ 79.845254] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845258] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845260] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845262] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845264] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845266] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845267] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845269] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845270] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845272] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845273] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845275] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845277] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845278] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845280] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845282] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845283] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845285] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845286] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845288] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845289] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845291] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845293] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845294] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845296] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845297] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845299] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
- [ 79.845301] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
- [ 79.845303] cfg80211: World regulatory domain updated:
- [ 79.845304] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 79.845306] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 79.845308] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 79.845309] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 79.845311] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 79.845313] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 79.845907] IR RC5(x) protocol handler initialized
- [ 79.974018] i2c-core: driver [tuner] using legacy suspend method
- [ 79.974021] i2c-core: driver [tuner] using legacy resume method
- [ 79.977777] IR RC6 protocol handler initialized
- [ 80.143341] IR JVC protocol handler initialized
- [ 80.203753] tveeprom 1-0050: Hauppauge model 69100, rev B4C3, serial# 7877414
- [ 80.203757] tveeprom 1-0050: MAC address is 00:0d:fe:78:33:26
- [ 80.203759] tveeprom 1-0050: tuner model is Conexant CX24118A (idx 123, type 4)
- [ 80.203761] tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
- [ 80.203763] tveeprom 1-0050: audio processor is None (idx 0)
- [ 80.203765] tveeprom 1-0050: decoder processor is CX880 (idx 20)
- [ 80.203766] tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
- [ 80.203768] cx88[0]: hauppauge eeprom: model=69100
- [ 80.886735] IR Sony protocol handler initialized
- [ 81.035217] cx2388x alsa driver version 0.0.8 loaded
- [ 81.037373] lirc_dev: IR Remote Control driver registered, major 249
- [ 81.038447] IR LIRC bridge handler initialized
- [ 81.060076] Registered IR keymap rc-hauppauge
- [ 81.060159] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/rc/rc0/input4
- [ 81.060214] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/rc/rc0
- [ 81.060291] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
- [ 81.060294] cx88[0]/2: cx2388x 8802 Driver Manager
- [ 81.060314] cx88-mpeg driver manager 0000:03:06.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 81.060322] cx88[0]/2: found at 0000:03:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xfa000000
- [ 81.060391] cx8800 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 81.060398] cx88[0]/0: found at 0000:03:06.0, rev: 5, irq: 20, latency: 32, mmio: 0xf8000000
- [ 81.060562] cx88[0]/0: registered device video0 [v4l2]
- [ 81.060586] cx88[0]/0: registered device vbi0
- [ 81.060688] cx88_audio 0000:03:06.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 81.060708] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
- [ 81.789012] cx88/2: cx2388x dvb driver version 0.0.8 loaded
- [ 81.789015] cx88/2: registering cx8802 driver, type: dvb access: shared
- [ 81.789017] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
- [ 81.789020] cx88[0]/2: cx2388x based DVB/ATSC card
- [ 81.789021] cx8802_alloc_frontends() allocating 1 frontend(s)
- [ 81.790646] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 83.161821] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 83.161880] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X
- [ 83.161900] HDA Intel 0000:01:00.1: setting latency timer to 64
- [ 84.333484] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
- [ 84.333589] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input5
- [ 84.339674] init: failsafe main process (1280) killed by TERM signal
- [ 84.799767] DVB: registering new adapter (cx88[0])
- [ 84.799771] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
- [ 86.472536] init: udev-fallback-graphics main process (1529) terminated with status 1
- [ 87.555512] r8169 0000:02:00.0: eth0: link down
- [ 87.555527] r8169 0000:02:00.0: eth0: link down
- [ 87.555698] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 88.821920] init: alsa-restore main process (1595) terminated with status 99
- [ 89.151210] r8169 0000:02:00.0: eth0: link up
- [ 91.480245] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 91.480429] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 91.620242] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
- [ 91.623676] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
- [ 91.623679] cx24116_firmware_ondemand: No firmware uploaded (timeout or file not found?)
- [ 91.623689] cx24116_cmd_execute(): Unable initialise the firmware
- [ 102.304041] eth0: no IPv6 routers present
- [ 143.481205] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
- [ 143.482936] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
- [ 143.482939] cx24116_firmware_ondemand: No firmware uploaded (timeout or file not found?)
- [ 143.482941] cx24116_cmd_execute(): Unable initialise the firmware
- [ 143.535609] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
- [ 143.537036] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
- [ 143.537039] cx24116_firmware_ondemand: No firmware uploaded (timeout or file not found?)
- [ 143.537041] cx24116_cmd_execute(): Unable initialise the firmware
- [ 144.694467] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
- [ 144.700687] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 145.663595] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 145.664117] [fglrx] Firegl kernel thread PID: 2865
- [ 145.664160] [fglrx] Firegl kernel thread PID: 2866
- [ 145.664226] [fglrx] Firegl kernel thread PID: 2867
- [ 145.664555] [fglrx] IRQ 44 Enabled
- [ 148.013296] [fglrx] Gart USWC size:1024 M.
- [ 148.013299] [fglrx] Gart cacheable size:405 M.
- [ 148.013302] [fglrx] Reserved FB block: Shared offset:0, size:1000000
- [ 148.013304] [fglrx] Reserved FB block: Unshared offset:f9cb000, size:335000
- [ 148.013306] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
- [ 151.537366] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
- [ 151.537382] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
- [ 151.538761] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
- [ 151.538774] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
- [ 166.146958] EXT4-fs (sda1): re-mounted. Opts: commit=0
- [ 170.148149] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
- [ 176.120407] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
- [ 176.120432] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
- [ 207.612134] usb 1-1: new high speed USB device number 2 using ehci_hcd
- [ 208.102507] usbcore: registered new interface driver uas
- [ 208.281190] Initializing USB Mass Storage driver...
- [ 208.281243] usbcore: registered new interface driver usb-storage
- [ 208.281244] USB Mass Storage support registered.
- [ 208.281709] scsi6 : usb-storage 1-1:1.0
- [ 208.281774] usbcore: registered new interface driver ums-cypress
- [ 209.281038] scsi 6:0:0:0: Direct-Access WDC WD25 00BEVS-22UST0 PQ: 0 ANSI: 0
- [ 209.377268] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 209.379489] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 209.381649] sd 6:0:0:0: [sdb] Write Protect is off
- [ 209.381661] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
- [ 209.382826] sd 6:0:0:0: [sdb] No Caching mode page present
- [ 209.382836] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 209.385277] sd 6:0:0:0: [sdb] No Caching mode page present
- [ 209.385287] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 209.427024] sdb: sdb1
- [ 209.430344] sd 6:0:0:0: [sdb] No Caching mode page present
- [ 209.430354] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 209.430362] sd 6:0:0:0: [sdb] Attached SCSI disk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement