Don't like ads? PRO users don't see any ads ;-)
Public Pastes
Guest

Untitled

By: a guest on May 18th, 2012  |  syntax: None  |  size: 44.87 KB  |  hits: 43  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. [dzusan@helllab doc]$ ifconfig
  2. lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 16436  metric 1
  3.         inet 127.0.0.1  netmask 255.0.0.0
  4.         inet6 ::1  prefixlen 128  scopeid 0x10<host>
  5.         loop  txqueuelen 0  (Local Loopback)
  6.         RX packets 764  bytes 57560 (56.2 KiB)
  7.         RX errors 0  dropped 0  overruns 0  frame 0
  8.         TX packets 764  bytes 57560 (56.2 KiB)
  9.         TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
  10.        
  11.  
  12. [dzusan@helllab doc]$ lspci
  13. 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
  14. 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
  15. 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
  16. 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
  17. 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
  18. 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
  19. 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
  20. 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
  21. 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
  22. 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
  23. 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
  24. 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
  25. 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] (rev 01)
  26. 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
  27. 01:03.0 Mass storage controller: Integrated Technology Express, Inc. ITE 8211F Single Channel UDMA 133 (rev 11)
  28. 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
  29. 04:00.0 VGA compatible controller: NVIDIA Corporation G80 [GeForce 8800 GTS] (rev a2)
  30.  
  31.  
  32. [dzusan@helllab doc]$ dmesg
  33. [    0.000000] Initializing cgroup subsys cpuset
  34. [    0.000000] Initializing cgroup subsys cpu
  35. [    0.000000] Linux version 3.3.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 8 05:10:33 UTC 2012
  36. [    0.000000] BIOS-provided physical RAM map:
  37. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  38. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  39. [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
  40. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
  41. [    0.000000]  BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
  42. [    0.000000]  BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
  43. [    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
  44. [    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
  45. [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
  46. [    0.000000] DMI 2.4 present.
  47. [    0.000000] DMI: stem manufacturer System Product Name/P5LD2, BIOS 1903    07/20/2007
  48. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  49. [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  50. [    0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
  51. [    0.000000] MTRR default type: uncachable
  52. [    0.000000] MTRR fixed ranges enabled:
  53. [    0.000000]   00000-9FFFF write-back
  54. [    0.000000]   A0000-DFFFF uncachable
  55. [    0.000000]   E0000-EFFFF write-through
  56. [    0.000000]   F0000-FFFFF write-protect
  57. [    0.000000] MTRR variable ranges enabled:
  58. [    0.000000]   0 base 000000000 mask F80000000 write-back
  59. [    0.000000]   1 disabled
  60. [    0.000000]   2 disabled
  61. [    0.000000]   3 disabled
  62. [    0.000000]   4 disabled
  63. [    0.000000]   5 disabled
  64. [    0.000000]   6 disabled
  65. [    0.000000]   7 disabled
  66. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  67. [    0.000000] found SMP MP-table at [c00ff780] ff780
  68. [    0.000000] initial memory mapped : 0 - 00c00000
  69. [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
  70. [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  71. [    0.000000]  0000000000 - 0000400000 page 4k
  72. [    0.000000]  0000400000 - 0037400000 page 2M
  73. [    0.000000]  0037400000 - 00377fe000 page 4k
  74. [    0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
  75. [    0.000000] RAMDISK: 7fcec000 - 7ff8f000
  76. [    0.000000] Allocated new RAMDISK: 3755b000 - 377fd3e6
  77. [    0.000000] Move RAMDISK from 000000007fcec000 - 000000007ff8e3e5 to 3755b000 - 377fd3e5
  78. [    0.000000] ACPI: RSDP 000faca0 00014 (v00 ACPIAM)
  79. [    0.000000] ACPI: RSDT 7ff90000 00038 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 07000720 MSFT 00000097)
  80. [    0.000000] ACPI: FACP 7ff90200 00081 (v01 A_M_I_ OEMFACP  07000720 MSFT 00000097)
  81. [    0.000000] ACPI: DSDT 7ff90590 08391 (v01  A0227 A0227000 00000000 INTL 20051117)
  82. [    0.000000] ACPI: FACS 7ff9e000 00040
  83. [    0.000000] ACPI: APIC 7ff90390 00080 (v01 A_M_I_ OEMAPIC  07000720 MSFT 00000097)
  84. [    0.000000] ACPI: SLIC 7ff90410 00176 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 07000720 MSFT 00000097)
  85. [    0.000000] ACPI: OEMB 7ff9e040 00066 (v01 A_M_I_ AMI_OEM  07000720 MSFT 00000097)
  86. [    0.000000] ACPI: MCFG 7ff98930 0003C (v01 A_M_I_ OEMMCFG  07000720 MSFT 00000097)
  87. [    0.000000] ACPI: Local APIC address 0xfee00000
  88. [    0.000000] 1159MB HIGHMEM available.
  89. [    0.000000] 887MB LOWMEM available.
  90. [    0.000000]   mapped low ram: 0 - 377fe000
  91. [    0.000000]   low ram: 0 - 377fe000
  92. [    0.000000] Zone PFN ranges:
  93. [    0.000000]   DMA      0x00000010 -> 0x00001000
  94. [    0.000000]   Normal   0x00001000 -> 0x000377fe
  95. [    0.000000]   HighMem  0x000377fe -> 0x0007ff90
  96. [    0.000000] Movable zone start PFN for each node
  97. [    0.000000] Early memory PFN ranges
  98. [    0.000000]     0: 0x00000010 -> 0x0000009f
  99. [    0.000000]     0: 0x00000100 -> 0x0007ff90
  100. [    0.000000] On node 0 totalpages: 524063
  101. [    0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f655a200
  102. [    0.000000]   DMA zone: 32 pages used for memmap
  103. [    0.000000]   DMA zone: 0 pages reserved
  104. [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
  105. [    0.000000]   Normal zone: 1744 pages used for memmap
  106. [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
  107. [    0.000000]   HighMem zone: 2320 pages used for memmap
  108. [    0.000000]   HighMem zone: 294530 pages, LIFO batch:31
  109. [    0.000000] Using APIC driver default
  110. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  111. [    0.000000] ACPI: Local APIC address 0xfee00000
  112. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  113. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  114. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
  115. [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
  116. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  117. [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  118. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  119. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  120. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  121. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  122. [    0.000000] ACPI: IRQ0 used by override.
  123. [    0.000000] ACPI: IRQ2 used by override.
  124. [    0.000000] ACPI: IRQ9 used by override.
  125. [    0.000000] Using ACPI (MADT) for SMP configuration information
  126. [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
  127. [    0.000000] nr_irqs_gsi: 40
  128. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  129. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
  130. [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
  131. [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000)
  132. [    0.000000] Booting paravirtualized kernel on bare hardware
  133. [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
  134. [    0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s30848 r0 d22400 u1048576
  135. [    0.000000] pcpu-alloc: s30848 r0 d22400 u1048576 alloc=1*4194304
  136. [    0.000000] pcpu-alloc: [0] 0 1 2 3
  137. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519967
  138. [    0.000000] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
  139. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  140. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  141. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  142. [    0.000000] Initializing CPU#0
  143. [    0.000000] allocated 4193280 bytes of page_cgroup
  144. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  145. [    0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
  146. [    0.000000] Memory: 2065336k/2096704k available (3774k kernel code, 30916k reserved, 1434k data, 520k init, 1187400k highmem)
  147. [    0.000000] virtual kernel memory layout:
  148. [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
  149. [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  150. [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
  151. [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
  152. [    0.000000]       .init : 0xc0617000 - 0xc0699000   ( 520 kB)
  153. [    0.000000]       .data : 0xc04af8a9 - 0xc0616400   (1434 kB)
  154. [    0.000000]       .text : 0xc0100000 - 0xc04af8a9   (3774 kB)
  155. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  156. [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  157. [    0.000000] Preemptible hierarchical RCU implementation.
  158. [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
  159. [    0.000000]  Verbose stalled-CPUs detection is disabled.
  160. [    0.000000] NR_IRQS:2304 nr_irqs:712 16
  161. [    0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
  162. [    0.000000] Console: colour VGA+ 80x25
  163. [    0.000000] console [tty0] enabled
  164. [    0.000000] Fast TSC calibration using PIT
  165. [    0.000000] Detected 2102.539 MHz processor.
  166. [    0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 4206.28 BogoMIPS (lpj=7008463)
  167. [    0.003339] pid_max: default: 32768 minimum: 301
  168. [    0.006687] Security Framework initialized
  169. [    0.006691] AppArmor: AppArmor disabled by boot time parameter
  170. [    0.006708] Mount-cache hash table entries: 512
  171. [    0.006839] Initializing cgroup subsys cpuacct
  172. [    0.006842] Initializing cgroup subsys memory
  173. [    0.006850] Initializing cgroup subsys devices
  174. [    0.006852] Initializing cgroup subsys freezer
  175. [    0.006854] Initializing cgroup subsys net_cls
  176. [    0.006856] Initializing cgroup subsys blkio
  177. [    0.006883] CPU: Physical Processor ID: 0
  178. [    0.006885] CPU: Processor Core ID: 0
  179. [    0.006888] mce: CPU supports 6 MCE banks
  180. [    0.006895] CPU0: Thermal monitoring enabled (TM2)
  181. [    0.006898] using mwait in idle threads.
  182. [    0.007705] ACPI: Core revision 20120111
  183. [    0.013363] ftrace: allocating 16619 entries in 33 pages
  184. [    0.023389] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  185. [    0.023748] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  186. [    0.057348] CPU0: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
  187. [    0.059996] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
  188. [    0.059996] PEBS disabled due to CPU errata.
  189. [    0.059996] ... version:                2
  190. [    0.059996] ... bit width:              40
  191. [    0.059996] ... generic registers:      2
  192. [    0.059996] ... value mask:             000000ffffffffff
  193. [    0.059996] ... max period:             000000007fffffff
  194. [    0.059996] ... fixed-purpose events:   3
  195. [    0.059996] ... event mask:             0000000700000003
  196. [    0.076789] NMI watchdog enabled, takes one hw-pmu counter.
  197. [    0.103344] CPU 1 irqstacks, hard=f58ec000 soft=f58ee000
  198. [    0.103347] Booting Node   0, Processors  #1
  199. [    0.103350] smpboot cpu 1: start_ip = 9b000
  200. [    0.006666] Initializing CPU#1
  201. [    0.116699] NMI watchdog enabled, takes one hw-pmu counter.
  202. [    0.123331] Brought up 2 CPUs
  203. [    0.123334] Total of 2 processors activated (8413.57 BogoMIPS).
  204. [    0.124564] devtmpfs: initialized
  205. [    0.124564] PM: Registering ACPI NVS region at 7ff9e000 (270336 bytes)
  206. [    0.124564] NET: Registered protocol family 16
  207. [    0.124564] ACPI: bus type pci registered
  208. [    0.124622] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
  209. [    0.124625] PCI: not using MMCONFIG
  210. [    0.124895] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
  211. [    0.124897] PCI: Using configuration type 1 for base access
  212. [    0.126696] bio: create slab <bio-0> at 0
  213. [    0.126710] ACPI: Added _OSI(Module Device)
  214. [    0.126710] ACPI: Added _OSI(Processor Device)
  215. [    0.126710] ACPI: Added _OSI(3.0 _SCP Extensions)
  216. [    0.126710] ACPI: Added _OSI(Processor Aggregator Device)
  217. [    0.127745] ACPI: EC: Look up EC in DSDT
  218. [    0.128992] ACPI: Executed 1 blocks of module-level executable AML code
  219. [    0.136289] ACPI: SSDT 7ff9e0b0 001C6 (v01    AMI   CPU1PM 00000001 INTL 20051117)
  220. [    0.136561] ACPI: Dynamic OEM Table Load:
  221. [    0.136565] ACPI: SSDT   (null) 001C6 (v01    AMI   CPU1PM 00000001 INTL 20051117)
  222. [    0.136755] ACPI: SSDT 7ff9e280 0013A (v01    AMI   CPU2PM 00000001 INTL 20051117)
  223. [    0.137019] ACPI: Dynamic OEM Table Load:
  224. [    0.137023] ACPI: SSDT   (null) 0013A (v01    AMI   CPU2PM 00000001 INTL 20051117)
  225. [    0.137266] ACPI: Interpreter enabled
  226. [    0.137280] ACPI: (supports S0 S1 S3 S4 S5)
  227. [    0.137304] ACPI: Using IOAPIC for interrupt routing
  228. [    0.137325] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
  229. [    0.138766] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
  230. [    0.138769] PCI: Using MMCONFIG for extended config space
  231. [    0.144179] ACPI: No dock devices found.
  232. [    0.144186] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  233. [    0.144241] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  234. [    0.144321] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
  235. [    0.144325] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
  236. [    0.144327] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
  237. [    0.144330] pci_root PNP0A08:00: host bridge window [mem 0x80010000-0xffffffff] (ignored)
  238. [    0.144333] PCI: root bus 00: using default resources
  239. [    0.144375] PCI host bridge to bus 0000:00
  240. [    0.144378] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
  241. [    0.144380] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  242. [    0.144392] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
  243. [    0.144437] pci 0000:00:01.0: [8086:2771] type 1 class 0x000604
  244. [    0.144479] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  245. [    0.144520] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
  246. [    0.144589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  247. [    0.144614] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
  248. [    0.144681] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  249. [    0.144705] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
  250. [    0.144744] pci 0000:00:1d.0: reg 20: [io  0x7000-0x701f]
  251. [    0.144774] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
  252. [    0.144813] pci 0000:00:1d.1: reg 20: [io  0x7400-0x741f]
  253. [    0.144843] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
  254. [    0.144882] pci 0000:00:1d.2: reg 20: [io  0x7800-0x781f]
  255. [    0.144912] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
  256. [    0.144951] pci 0000:00:1d.3: reg 20: [io  0x8000-0x801f]
  257. [    0.144989] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
  258. [    0.145008] pci 0000:00:1d.7: reg 10: [mem 0xcbdff800-0xcbdffbff]
  259. [    0.145088] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  260. [    0.145107] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
  261. [    0.145169] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
  262. [    0.145248] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
  263. [    0.145259] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
  264. [    0.145300] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
  265. [    0.145313] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
  266. [    0.145322] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
  267. [    0.145332] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
  268. [    0.145341] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
  269. [    0.145350] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
  270. [    0.145386] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
  271. [    0.145401] pci 0000:00:1f.2: reg 10: [io  0x9800-0x9807]
  272. [    0.145409] pci 0000:00:1f.2: reg 14: [io  0x9400-0x9403]
  273. [    0.145417] pci 0000:00:1f.2: reg 18: [io  0x9000-0x9007]
  274. [    0.145425] pci 0000:00:1f.2: reg 1c: [io  0x8800-0x8803]
  275. [    0.145433] pci 0000:00:1f.2: reg 20: [io  0x8400-0x840f]
  276. [    0.145441] pci 0000:00:1f.2: reg 24: [mem 0xcbdffc00-0xcbdfffff]
  277. [    0.145476] pci 0000:00:1f.2: PME# supported from D3hot
  278. [    0.145492] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
  279. [    0.145542] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
  280. [    0.145611] pci 0000:04:00.0: [10de:0193] type 0 class 0x000300
  281. [    0.145621] pci 0000:04:00.0: reg 10: [mem 0xcf000000-0xcfffffff]
  282. [    0.145632] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
  283. [    0.145643] pci 0000:04:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
  284. [    0.145650] pci 0000:04:00.0: reg 24: [io  0xe800-0xe87f]
  285. [    0.145658] pci 0000:04:00.0: reg 30: [mem 0xcefe0000-0xceffffff pref]
  286. [    0.145696] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
  287. [    0.145704] pci 0000:00:01.0: PCI bridge to [bus 04-04]
  288. [    0.145708] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
  289. [    0.145711] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xcfffffff]
  290. [    0.145716] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  291. [    0.145754] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
  292. [    0.145758] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
  293. [    0.145823] pci 0000:02:00.0: [11ab:4362] type 0 class 0x000200
  294. [    0.145846] pci 0000:02:00.0: reg 10: [mem 0xcbffc000-0xcbffffff 64bit]
  295. [    0.145858] pci 0000:02:00.0: reg 18: [io  0xc800-0xc8ff]
  296. [    0.145901] pci 0000:02:00.0: reg 30: [mem 0xcbfc0000-0xcbfdffff pref]
  297. [    0.145968] pci 0000:02:00.0: supports D1 D2
  298. [    0.145970] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  299. [    0.145986] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
  300. [    0.145996] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
  301. [    0.146000] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
  302. [    0.146004] pci 0000:00:1c.3:   bridge window [mem 0xcbf00000-0xcbffffff]
  303. [    0.146043] pci 0000:01:03.0: [1283:8211] type 0 class 0x000180
  304. [    0.146059] pci 0000:01:03.0: reg 10: [io  0xb800-0xb807]
  305. [    0.146069] pci 0000:01:03.0: reg 14: [io  0xb400-0xb403]
  306. [    0.146079] pci 0000:01:03.0: reg 18: [io  0xb000-0xb007]
  307. [    0.146088] pci 0000:01:03.0: reg 1c: [io  0xa800-0xa803]
  308. [    0.146098] pci 0000:01:03.0: reg 20: [io  0xa400-0xa40f]
  309. [    0.146115] pci 0000:01:03.0: reg 30: [mem 0xcbee0000-0xcbefffff pref]
  310. [    0.146180] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
  311. [    0.146184] pci 0000:00:1e.0:   bridge window [io  0xa000-0xbfff]
  312. [    0.146188] pci 0000:00:1e.0:   bridge window [mem 0xcbe00000-0xcbefffff]
  313. [    0.146194] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
  314. [    0.146197] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
  315. [    0.146213] pci_bus 0000:00: on NUMA node 0
  316. [    0.146217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  317. [    0.146339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  318. [    0.146380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
  319. [    0.146479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  320. [    0.146523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  321. [    0.146579]  pci0000:00: Requesting ACPI _OSC control (0x1d)
  322. [    0.146583]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
  323. [    0.146585] ACPI _OSC control for PCIe not granted, disabling ASPM
  324. [    0.149728] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  325. [    0.149780] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  326. [    0.149829] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
  327. [    0.149878] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  328. [    0.149927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  329. [    0.149976] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  330. [    0.150031] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  331. [    0.150082] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  332. [    0.150138] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
  333. [    0.150138] vgaarb: loaded
  334. [    0.150138] vgaarb: bridge control possible 0000:04:00.0
  335. [    0.150138] PCI: Using ACPI for IRQ routing
  336. [    0.150138] PCI: pci_cache_line_size set to 64 bytes
  337. [    0.150146] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  338. [    0.150148] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
  339. [    0.150263] NetLabel: Initializing
  340. [    0.150265] NetLabel:  domain hash size = 128
  341. [    0.150267] NetLabel:  protocols = UNLABELED CIPSOv4
  342. [    0.150281] NetLabel:  unlabeled traffic allowed by default
  343. [    0.150392] hpet clockevent registered
  344. [    0.150395] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  345. [    0.150400] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  346. [    0.150405] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  347. [    0.160007] Switching to clocksource hpet
  348. [    0.167203] pnp: PnP ACPI init
  349. [    0.167229] ACPI: bus type pnp registered
  350. [    0.167333] pnp 00:00: [bus 00-ff]
  351. [    0.167337] pnp 00:00: [io  0x0cf8-0x0cff]
  352. [    0.167339] pnp 00:00: [io  0x0000-0x0cf7 window]
  353. [    0.167342] pnp 00:00: [io  0x0d00-0xffff window]
  354. [    0.167344] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  355. [    0.167347] pnp 00:00: [mem 0x80010000-0xffffffff window]
  356. [    0.167407] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  357. [    0.167417] pnp 00:01: [mem 0xfed13000-0xfed19fff]
  358. [    0.167472] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
  359. [    0.167476] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
  360. [    0.167506] pnp 00:02: [dma 4]
  361. [    0.167509] pnp 00:02: [io  0x0000-0x000f]
  362. [    0.167511] pnp 00:02: [io  0x0081-0x0083]
  363. [    0.167513] pnp 00:02: [io  0x0087]
  364. [    0.167515] pnp 00:02: [io  0x0089-0x008b]
  365. [    0.167517] pnp 00:02: [io  0x008f]
  366. [    0.167519] pnp 00:02: [io  0x00c0-0x00df]
  367. [    0.167553] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  368. [    0.167565] pnp 00:03: [io  0x0070-0x0071]
  369. [    0.167579] pnp 00:03: [irq 8]
  370. [    0.167611] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
  371. [    0.167621] pnp 00:04: [io  0x0061]
  372. [    0.167655] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
  373. [    0.167665] pnp 00:05: [io  0x00f0-0x00ff]
  374. [    0.167671] pnp 00:05: [irq 13]
  375. [    0.167703] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
  376. [    0.168029] pnp 00:06: [irq 6]
  377. [    0.168031] pnp 00:06: [dma 2]
  378. [    0.168034] pnp 00:06: [io  0x03f0-0x03f5]
  379. [    0.168036] pnp 00:06: [io  0x03f7]
  380. [    0.168100] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
  381. [    0.168501] pnp 00:07: [irq 7]
  382. [    0.168503] pnp 00:07: [dma 3]
  383. [    0.168506] pnp 00:07: [io  0x0378-0x037f]
  384. [    0.168508] pnp 00:07: [io  0x0778-0x077f]
  385. [    0.168680] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
  386. [    0.168714] pnp 00:08: [io  0x0000-0xffffffff disabled]
  387. [    0.168717] pnp 00:08: [io  0x0000-0xffffffff disabled]
  388. [    0.168719] pnp 00:08: [io  0x0290-0x0297]
  389. [    0.168771] system 00:08: [io  0x0290-0x0297] has been reserved
  390. [    0.168774] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  391. [    0.168890] pnp 00:09: [io  0x0010-0x001f]
  392. [    0.168892] pnp 00:09: [io  0x0022-0x003f]
  393. [    0.168894] pnp 00:09: [io  0x0044-0x005f]
  394. [    0.168897] pnp 00:09: [io  0x0062-0x0063]
  395. [    0.168899] pnp 00:09: [io  0x0065-0x006f]
  396. [    0.168901] pnp 00:09: [io  0x0072-0x007f]
  397. [    0.168903] pnp 00:09: [io  0x0080]
  398. [    0.168905] pnp 00:09: [io  0x0084-0x0086]
  399. [    0.168907] pnp 00:09: [io  0x0088]
  400. [    0.168909] pnp 00:09: [io  0x008c-0x008e]
  401. [    0.168911] pnp 00:09: [io  0x0090-0x009f]
  402. [    0.168913] pnp 00:09: [io  0x00a2-0x00bf]
  403. [    0.168915] pnp 00:09: [io  0x00e0-0x00ef]
  404. [    0.168917] pnp 00:09: [io  0x04d0-0x04d1]
  405. [    0.168919] pnp 00:09: [io  0x0800-0x087f]
  406. [    0.168921] pnp 00:09: [io  0x0000-0xffffffff disabled]
  407. [    0.168923] pnp 00:09: [io  0x0480-0x04bf]
  408. [    0.168925] pnp 00:09: [io  0x0900-0x091f]
  409. [    0.168928] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
  410. [    0.168930] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
  411. [    0.168932] pnp 00:09: [mem 0xffb00000-0xffbfffff]
  412. [    0.168934] pnp 00:09: [mem 0xfff00000-0xffffffff]
  413. [    0.169008] system 00:09: [io  0x04d0-0x04d1] has been reserved
  414. [    0.169011] system 00:09: [io  0x0800-0x087f] has been reserved
  415. [    0.169014] system 00:09: [io  0x0480-0x04bf] has been reserved
  416. [    0.169017] system 00:09: [io  0x0900-0x091f] has been reserved
  417. [    0.169020] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
  418. [    0.169023] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
  419. [    0.169026] system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved
  420. [    0.169029] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
  421. [    0.169032] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  422. [    0.169118] pnp 00:0a: [io  0x0060]
  423. [    0.169120] pnp 00:0a: [io  0x0064]
  424. [    0.169126] pnp 00:0a: [irq 1]
  425. [    0.169174] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  426. [    0.169243] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
  427. [    0.169245] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
  428. [    0.169297] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
  429. [    0.169300] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
  430. [    0.169304] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  431. [    0.169816] pnp 00:0c: [irq 4]
  432. [    0.169819] pnp 00:0c: [dma 0 disabled]
  433. [    0.169821] pnp 00:0c: [io  0x03f8-0x03ff]
  434. [    0.169909] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
  435. [    0.169945] pnp 00:0d: [mem 0xf0000000-0xf3ffffff]
  436. [    0.169997] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved
  437. [    0.170011] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
  438. [    0.170154] pnp 00:0e: [mem 0x00000000-0x0009ffff]
  439. [    0.170157] pnp 00:0e: [mem 0x000c0000-0x000dffff]
  440. [    0.170159] pnp 00:0e: [mem 0x000e0000-0x000fffff]
  441. [    0.170162] pnp 00:0e: [mem 0x00100000-0x7fffffff]
  442. [    0.170164] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
  443. [    0.170226] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
  444. [    0.170230] system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved
  445. [    0.170233] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
  446. [    0.170236] system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
  447. [    0.170239] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
  448. [    0.170374] pnp: PnP ACPI: found 15 devices
  449. [    0.170375] ACPI: ACPI bus type pnp unregistered
  450. [    0.207592] PCI: max bus depth: 1 pci_try_num: 2
  451. [    0.207623] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
  452. [    0.207627] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
  453. [    0.207631] pci 0000:00:01.0: PCI bridge to [bus 04-04]
  454. [    0.207634] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
  455. [    0.207638] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xcfffffff]
  456. [    0.207641] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  457. [    0.207646] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
  458. [    0.207649] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
  459. [    0.207654] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
  460. [    0.207658] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
  461. [    0.207664] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
  462. [    0.207667] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
  463. [    0.207672] pci 0000:00:1c.3:   bridge window [mem 0xcbf00000-0xcbffffff]
  464. [    0.207679] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
  465. [    0.207682] pci 0000:00:1e.0:   bridge window [io  0xa000-0xbfff]
  466. [    0.207687] pci 0000:00:1e.0:   bridge window [mem 0xcbe00000-0xcbefffff]
  467. [    0.207723] pci 0000:00:1e.0: setting latency timer to 64
  468. [    0.207727] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
  469. [    0.207730] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  470. [    0.207732] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
  471. [    0.207735] pci_bus 0000:04: resource 1 [mem 0xcc000000-0xcfffffff]
  472. [    0.207737] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  473. [    0.207740] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
  474. [    0.207742] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
  475. [    0.207745] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
  476. [    0.207747] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
  477. [    0.207750] pci_bus 0000:02: resource 1 [mem 0xcbf00000-0xcbffffff]
  478. [    0.207752] pci_bus 0000:01: resource 0 [io  0xa000-0xbfff]
  479. [    0.207755] pci_bus 0000:01: resource 1 [mem 0xcbe00000-0xcbefffff]
  480. [    0.207757] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
  481. [    0.207760] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
  482. [    0.207799] NET: Registered protocol family 2
  483. [    0.207875] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  484. [    0.208099] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  485. [    0.208632] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  486. [    0.208855] TCP: Hash tables configured (established 131072 bind 65536)
  487. [    0.208858] TCP reno registered
  488. [    0.208860] UDP hash table entries: 512 (order: 2, 16384 bytes)
  489. [    0.208869] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  490. [    0.208937] NET: Registered protocol family 1
  491. [    0.209097] pci 0000:04:00.0: Boot video device
  492. [    0.209105] PCI: CLS 16 bytes, default 64
  493. [    0.209163] Unpacking initramfs...
  494. [    0.272462] Freeing initrd memory: 2700k freed
  495. [    0.273811] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  496. [    0.273814] apm: disabled - APM is not SMP safe.
  497. [    0.274071] audit: initializing netlink socket (disabled)
  498. [    0.274088] type=2000 audit(1337357835.273:1): initialized
  499. [    0.274528] highmem bounce pool size: 64 pages
  500. [    0.274533] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  501. [    0.276787] VFS: Disk quotas dquot_6.5.2
  502. [    0.276855] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  503. [    0.276965] msgmni has been set to 1719
  504. [    0.277163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  505. [    0.277199] io scheduler noop registered
  506. [    0.277201] io scheduler deadline registered
  507. [    0.277208] io scheduler cfq registered (default)
  508. [    0.277335] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  509. [    0.277421] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
  510. [    0.277518] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
  511. [    0.277725] intel_idle: MWAIT substates: 0x20
  512. [    0.277727] intel_idle: does not run on family 6 model 15
  513. [    0.277752] GHES: HEST is not enabled!
  514. [    0.277767] isapnp: Scanning for PnP cards...
  515. [    0.633485] isapnp: No Plug & Play device found
  516. [    0.633552] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  517. [    0.654047] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  518. [    0.674939] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  519. [    0.675216] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  520. [    0.675219] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  521. [    0.675743] serio: i8042 KBD port at 0x60,0x64 irq 1
  522. [    0.675862] mousedev: PS/2 mouse device common for all mice
  523. [    0.675943] rtc_cmos 00:03: RTC can wake from S4
  524. [    0.676057] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  525. [    0.676081] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
  526. [    0.676105] cpuidle: using governor ladder
  527. [    0.676107] cpuidle: using governor menu
  528. [    0.676339] TCP cubic registered
  529. [    0.676475] NET: Registered protocol family 10
  530. [    0.677002] NET: Registered protocol family 17
  531. [    0.677007] Registering the dns_resolver key type
  532. [    0.677028] Using IPI No-Shortcut mode
  533. [    0.677143] PM: Hibernation image not present or could not be loaded.
  534. [    0.677149] registered taskstats version 1
  535. [    0.677516] rtc_cmos 00:03: setting system clock to 2012-05-18 16:17:16 UTC (1337357836)
  536. [    0.677557] Initializing network drop monitor service
  537. [    0.677626] Freeing unused kernel memory: 520k freed
  538. [    0.677862] Write protecting the kernel text: 3776k
  539. [    0.677887] Write protecting the kernel read-only data: 1112k
  540. [    0.685514] udevd[37]: starting version 181
  541. [    0.695654] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  542. [    0.717902] usbcore: registered new interface driver usbfs
  543. [    0.717929] usbcore: registered new interface driver hub
  544. [    0.717994] usbcore: registered new device driver usb
  545. [    0.718440] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  546. [    0.718498] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  547. [    0.718502] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  548. [    0.718524] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  549. [    0.718542] ehci_hcd 0000:00:1d.7: using broken periodic workaround
  550. [    0.718552] ehci_hcd 0000:00:1d.7: debug port 1
  551. [    0.722434] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
  552. [    0.722456] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcbdff800
  553. [    0.725368] SCSI subsystem initialized
  554. [    0.727285] libata version 3.00 loaded.
  555. [    0.728156] pata_it821x: controller in pass through mode.
  556. [    0.728189] pata_it821x 0000:01:03.0: setting latency timer to 64
  557. [    0.729023] scsi0 : pata_it821x
  558. [    0.729491] uhci_hcd: USB Universal Host Controller Interface driver
  559. [    0.729909] scsi1 : pata_it821x
  560. [    0.730024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  561. [    0.730220] ata1: PATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 20
  562. [    0.730224] ata2: PATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 20
  563. [    0.730578] hub 1-0:1.0: USB hub found
  564. [    0.730584] hub 1-0:1.0: 8 ports detected
  565. [    0.730688] ata_piix 0000:00:1f.1: version 2.13
  566. [    0.730744] ata_piix 0000:00:1f.1: setting latency timer to 64
  567. [    0.731417] scsi2 : ata_piix
  568. [    0.731552] scsi3 : ata_piix
  569. [    0.732828] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  570. [    0.732832] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  571. [    0.732861] ahci 0000:00:1f.2: version 3.0
  572. [    0.732916] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
  573. [    0.732984] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
  574. [    0.732988] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
  575. [    0.732992] ahci 0000:00:1f.2: setting latency timer to 64
  576. [    0.734240] scsi4 : ahci
  577. [    0.734649] scsi5 : ahci
  578. [    0.735447] scsi6 : ahci
  579. [    0.736008] scsi7 : ahci
  580. [    0.736589] ata5: SATA max UDMA/133 abar m1024@0xcbdffc00 port 0xcbdffd00 irq 43
  581. [    0.736593] ata6: SATA max UDMA/133 abar m1024@0xcbdffc00 port 0xcbdffd80 irq 43
  582. [    0.736596] ata7: SATA max UDMA/133 abar m1024@0xcbdffc00 port 0xcbdffe00 irq 43
  583. [    0.736599] ata8: SATA max UDMA/133 abar m1024@0xcbdffc00 port 0xcbdffe80 irq 43
  584. [    0.736662] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  585. [    0.736666] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  586. [    0.736697] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  587. [    0.736727] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000
  588. [    0.737107] hub 2-0:1.0: USB hub found
  589. [    0.737112] hub 2-0:1.0: 2 ports detected
  590. [    0.737201] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  591. [    0.737205] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  592. [    0.737218] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  593. [    0.737252] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400
  594. [    0.737416] hub 3-0:1.0: USB hub found
  595. [    0.737421] hub 3-0:1.0: 2 ports detected
  596. [    0.737504] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  597. [    0.737507] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  598. [    0.737518] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  599. [    0.737549] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800
  600. [    0.737709] hub 4-0:1.0: USB hub found
  601. [    0.737713] hub 4-0:1.0: 2 ports detected
  602. [    0.737792] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  603. [    0.737795] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  604. [    0.737803] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  605. [    0.737834] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000
  606. [    0.738064] hub 5-0:1.0: USB hub found
  607. [    0.738068] hub 5-0:1.0: 2 ports detected
  608. [    0.910312] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
  609. [    0.923526] ata3.00: configured for UDMA/33
  610. [    1.056708] ata7: SATA link down (SStatus 0 SControl 300)
  611. [    1.068268] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  612. [    1.068290] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  613. [    1.068336] ata8: SATA link down (SStatus 0 SControl 300)
  614. [    1.068611] ata5.00: ATA-9: M4-CT064M4SSD2, 0009, max UDMA/100
  615. [    1.068615] ata5.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  616. [    1.068975] ata5.00: configured for UDMA/100
  617. [    1.072068] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
  618. [    1.072378] scsi 4:0:0:0: Direct-Access     ATA      M4-CT064M4SSD2   0009 PQ: 0 ANSI: 5
  619. [    1.081238] ata6.00: ATA-8: WDC WD5001AALS-00E3A0, 05.01D05, max UDMA/133
  620. [    1.081242] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  621. [    1.082772] ata6.00: configured for UDMA/133
  622. [    1.082882] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5001AALS-0 05.0 PQ: 0 ANSI: 5
  623. [    1.096475] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  624. [    1.096480] cdrom: Uniform CD-ROM driver Revision: 3.20
  625. [    1.096815] sr 2:0:0:0: Attached scsi CD-ROM sr0
  626. [    1.097017] sd 4:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
  627. [    1.097087] sd 4:0:0:0: [sda] Write Protect is off
  628. [    1.097091] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
  629. [    1.097113] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  630. [    1.097447] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  631. [    1.097556]  sda: sda1 sda2 sda3
  632. [    1.097584] sd 5:0:0:0: [sdb] Write Protect is off
  633. [    1.097588] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  634. [    1.097610] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  635. [    1.098328] sd 4:0:0:0: [sda] Attached SCSI disk
  636. [    1.106554]  sdb: sdb1
  637. [    1.106935] sd 5:0:0:0: [sdb] Attached SCSI disk
  638. [    1.143480] usb 1-3: new high-speed USB device number 3 using ehci_hcd
  639. [    1.212840] Btrfs loaded
  640. [    1.213908] device fsid e17f4e20-e7dd-45e3-b5a6-ea2d8938c7db devid 1 transid 14303 /dev/sda1
  641. [    1.214194] btrfs: disk space caching is enabled
  642. [    1.220140] Btrfs detected SSD devices, enabling SSD mode
  643. [    1.276731] Refined TSC clocksource calibration: 2102.684 MHz.
  644. [    1.276744] Switching to clocksource tsc
  645. [    1.373355] usb 1-7: new high-speed USB device number 4 using ehci_hcd
  646. [    1.723359] usb 2-1: new full-speed USB device number 2 using uhci_hcd
  647. [    2.199564] udevd[373]: starting version 182
  648. [    2.269193] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  649. [    2.269200] ACPI: Power Button [PWRB]
  650. [    2.269806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  651. [    2.269811] ACPI: Power Button [PWRF]
  652. [    2.275254] Floppy drive(s): fd0 is 1.44M
  653. [    2.275648] parport_pc 00:07: reported by Plug and Play ACPI
  654. [    2.275798] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
  655. [    2.286238] Linux agpgart interface v0.103
  656. [    2.288295] sky2: driver version 1.30
  657. [    2.288388] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
  658. [    2.288478] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
  659. [    2.291504] FDC 0 is a post-1991 82077
  660. [    2.291847] sky2 0000:02:00.0: eth0: addr 00:17:31:8d:68:8b
  661. [    2.310505] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
  662. [    2.312626] intel_rng: FWH not detected
  663. [    2.316148] generic-usb 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1/input0
  664. [    2.322691] leds_ss4200: no LED devices found
  665. [    2.323297] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
  666. [    2.333008] input: PC Speaker as /devices/platform/pcspkr/input/input5
  667. [    2.333026] generic-usb 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1/input1
  668. [    2.333053] usbcore: registered new interface driver usbhid
  669. [    2.333055] usbhid: USB HID core driver
  670. [    2.333820] iTCO_vendor_support: vendor-support=0
  671. [    2.334184] usbcore: registered new interface driver uas
  672. [    2.335835] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
  673. [    2.337840] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
  674. [    2.338251] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  675. [    2.340130] Initializing USB Mass Storage driver...
  676. [    2.340804] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120111/utaddress-251)
  677. [    2.340812] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  678. [    2.343274] scsi8 : usb-storage 1-7:1.0
  679. [    2.348868] usbcore: registered new interface driver usb-storage
  680. [    2.348872] USB Mass Storage support registered.
  681. [    2.412299] usbcore: registered new interface driver snd-usb-audio
  682. [    2.438680] ppdev: user-space parallel port driver
  683. [    2.495110] nvidia: module license 'NVIDIA' taints kernel.
  684. [    2.495115] Disabling lock debugging due to kernel taint
  685. [    2.519262] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  686. [    2.519493] NVRM: loading NVIDIA UNIX x86 Kernel Module  295.49  Mon Apr 30 23:30:07 PDT 2012
  687. [    2.557870] device fsid e17f4e20-e7dd-45e3-b5a6-ea2d8938c7db devid 1 transid 14303 /dev/sda1
  688. [    2.558273] device fsid a7a69c80-437d-4050-8c69-01126e394af3 devid 1 transid 78281 /dev/sda2
  689. [    2.597275] btrfs: use ssd allocation scheme
  690. [    2.597277] btrfs: disk space caching is enabled
  691. [    2.600042] device fsid a7a69c80-437d-4050-8c69-01126e394af3 devid 1 transid 78281 /dev/sda2
  692. [    2.600373] btrfs: use ssd allocation scheme
  693. [    2.600375] btrfs: disk space caching is enabled
  694. [    2.624425] fuse init (API version 7.18)
  695. [    3.350899] scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
  696. [    3.353809] scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
  697. [    3.357036] scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
  698. [    3.362031] scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
  699. [    3.369263] sd 8:0:0:0: [sdc] Attached SCSI removable disk
  700. [    3.374169] sd 8:0:0:1: [sdd] Attached SCSI removable disk
  701. [    3.380762] sd 8:0:0:2: [sde] Attached SCSI removable disk
  702. [    3.381636] sd 8:0:0:3: [sdf] Attached SCSI removable disk
  703. [   23.296698] usb 1-5: new high-speed USB device number 5 using ehci_hcd
  704. [   23.422603] scsi9 : usb-storage 1-5:1.0
  705. [   24.424167] scsi 9:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
  706. [   26.450773] sd 9:0:0:0: [sdg] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB)
  707. [   26.451267] sd 9:0:0:0: [sdg] Write Protect is off
  708. [   26.451271] sd 9:0:0:0: [sdg] Mode Sense: 23 00 00 00
  709. [   26.451767] sd 9:0:0:0: [sdg] No Caching mode page present
  710. [   26.451771] sd 9:0:0:0: [sdg] Assuming drive cache: write through
  711. [   26.454519] sd 9:0:0:0: [sdg] No Caching mode page present
  712. [   26.454524] sd 9:0:0:0: [sdg] Assuming drive cache: write through
  713. [   26.501449]  sdg: sdg1
  714. [   26.504393] sd 9:0:0:0: [sdg] No Caching mode page present
  715. [   26.504398] sd 9:0:0:0: [sdg] Assuming drive cache: write through
  716. [   26.504402] sd 9:0:0:0: [sdg] Attached SCSI removable disk
  717. [   27.687528] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
create a new version of this paste RAW Paste Data