API tools faq
paste
Advertisement
Guest User

dmesg

a guest
Aug 1st, 2013
176
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 124.17 KB | None | 0 0
raw download clone embed print report
  1. 51627] sd 0:0:0:0: Attached scsi generic sg0 type 0
  2. [ 2.852457] sr 1:0:0:0: Attached scsi generic sg1 type 5
  3. [ 2.992617] usb 2-2: New USB device found, idVendor=04f2, idProduct=b293
  4. [ 2.992627] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
  5. [ 2.992633] usb 2-2: Product: HP Webcam-101
  6. [ 2.992637] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
  7. [ 2.992642] usb 2-2: SerialNumber: SN0001
  8. [ 3.040347] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
  9. [ 3.040552] radeon 0000:00:01.0: WB enabled
  10. [ 3.040560] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  11. [ 3.057097] [drm] ring test on 0 succeeded in 1 usecs
  12. [ 3.057305] [drm] ib test on ring 0 succeeded in 0 usecs
  13. [ 3.058203] [drm] Radeon Display Connectors
  14. [ 3.058207] [drm] Connector 0:
  15. [ 3.058211] [drm] LVDS
  16. [ 3.058214] [drm] HPD1
  17. [ 3.058219] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
  18. [ 3.058223] [drm] Encoders:
  19. [ 3.058227] [drm] LCD1: INTERNAL_UNIPHY
  20. [ 3.058231] [drm] Connector 1:
  21. [ 3.058233] [drm] HDMI-A
  22. [ 3.058236] [drm] HPD2
  23. [ 3.058241] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
  24. [ 3.058244] [drm] Encoders:
  25. [ 3.058247] [drm] DFP1: INTERNAL_UNIPHY
  26. [ 3.058251] [drm] Connector 2:
  27. [ 3.058254] [drm] VGA
  28. [ 3.058258] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
  29. [ 3.058262] [drm] Encoders:
  30. [ 3.058265] [drm] CRT1: INTERNAL_KLDSCP_DAC1
  31. [ 3.058333] [drm] Internal thermal controller without fan control
  32. [ 3.058415] [drm] radeon: power management initialized
  33. [ 3.132285] usb 4-2: new full-speed USB device number 2 using ohci_hcd
  34. [ 3.296420] usb 4-2: New USB device found, idVendor=03f0, idProduct=311d
  35. [ 3.296435] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  36. [ 3.372592] usb 1-3.1: new high-speed USB device number 3 using ehci_hcd
  37. [ 3.466541] usb 1-3.1: New USB device found, idVendor=05e3, idProduct=0610
  38. [ 3.466551] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  39. [ 3.466557] usb 1-3.1: Product: USB2.0 Hub
  40. [ 3.468069] hub 1-3.1:1.0: USB hub found
  41. [ 3.468460] hub 1-3.1:1.0: 4 ports detected
  42. [ 3.512192] [drm] fb mappable at 0x80142000
  43. [ 3.512197] [drm] vram apper at 0x80000000
  44. [ 3.512200] [drm] size 5324800
  45. [ 3.512204] [drm] fb depth is 24
  46. [ 3.512207] [drm] pitch is 5888
  47. [ 3.512522] fbcon: radeondrmfb (fb0) is primary device
  48. [ 3.541332] usb 1-3.3: new low-speed USB device number 4 using ehci_hcd
  49. [ 3.642563] usb 1-3.3: New USB device found, idVendor=04f3, idProduct=0103
  50. [ 3.642575] usb 1-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  51. [ 3.656267] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.3/1-3.3:1.0/input/input5
  52. [ 3.656602] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:12.2-3.3/input0
  53. [ 3.662515] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.3/1-3.3:1.1/input/input6
  54. [ 3.662667] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:12.2-3.3/input1
  55. [ 3.662707] usbcore: registered new interface driver usbhid
  56. [ 3.662711] usbhid: USB HID core driver
  57. [ 3.741051] usb 1-3.1.2: new low-speed USB device number 5 using ehci_hcd
  58. [ 3.839026] usb 1-3.1.2: New USB device found, idVendor=046d, idProduct=c05b
  59. [ 3.839039] usb 1-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  60. [ 3.839047] usb 1-3.1.2: Product: USB Optical Mouse
  61. [ 3.839054] usb 1-3.1.2: Manufacturer: Logitech
  62. [ 3.842895] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/input/input7
  63. [ 3.843301] generic-usb 0003:046D:C05B.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.2-3.1.2/input0
  64. [ 4.085466] Console: switching to colour frame buffer device 170x48
  65. [ 4.093528] fb0: radeondrmfb frame buffer device
  66. [ 4.093533] drm: registered panic notifier
  67. [ 4.093545] [drm] Initialized radeon 2.16.0 20080528 for 0000:00:01.0 on minor 0
  68. [ 4.161743] microcode: CPU0: patch_level=0x05000101
  69. [ 4.168243] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
  70. [ 4.172134] microcode: CPU0: new patch_level=0x0500010d
  71. [ 4.176215] microcode: CPU1: patch_level=0x05000101
  72. [ 4.182859] platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
  73. [ 4.186750] microcode: CPU1: new patch_level=0x0500010d
  74. [ 4.190939] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  75. [ 4.628287] PM: Starting manual resume from disk
  76. [ 4.628299] PM: Hibernation image partition 8:2 present
  77. [ 4.628303] PM: Looking for hibernation image.
  78. [ 4.644969] PM: Image not found (code -22)
  79. [ 4.644977] PM: Hibernation image not present or could not be loaded.
  80. [ 4.688343] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  81. [ 6.464483] udev[366]: starting version 164
  82. [ 6.989000] udev[389]: renamed network interface eth0 to eth2
  83. [ 7.268261] ACPI: acpi_idle registered with cpuidle
  84. [ 7.349810] ACPI: Battery Slot [BAT0] (battery absent)
  85. [ 7.351831] ACPI: AC Adapter [AC] (on-line)
  86. [ 7.422661] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
  87. [ 7.453483] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
  88. [ 7.455612] Initializing Realtek PCIE storage driver...
  89. [ 7.456383] Resource length: 0x1000
  90. [ 7.456436] Original address: 0x90300000, remapped address: 0xf822e000
  91. [ 7.456446] pci->irq = 20
  92. [ 7.456451] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  93. [ 7.456538] rts_pstor 0000:02:00.0: setting latency timer to 64
  94. [ 7.496384] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
  95. [ 7.496559] SP5100 TCO timer: mmio address 0xb80430 already in use
  96. [ 7.656752] scsi2 : SCSI emulation for PCI-Express Mass Storage devices
  97. [ 7.657174] rts_pstor: waiting for device to settle before scanning
  98. [ 7.662379] cfg80211: Calling CRDA to update world regulatory domain
  99. [ 7.733434] wmi: Mapper loaded
  100. [ 7.868418] powernow-k8: Found 1 AMD E-300 APU with Radeon(tm) HD Graphics (2 cpu cores) (version 2.20.00)
  101. [ 7.868504] powernow-k8: 0 : pstate 0 (1300 MHz)
  102. [ 7.868509] powernow-k8: 1 : pstate 1 (1114 MHz)
  103. [ 7.868513] powernow-k8: 2 : pstate 2 (780 MHz)
  104. [ 7.974448] input: HP WMI hotkeys as /devices/virtual/input/input8
  105. [ 7.992768] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
  106. [ 7.992787] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f744d8c0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
  107. [ 7.992810] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f744f770), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
  108. [ 7.993837] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20110623/dsopcode-236)
  109. [ 7.993853] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node f744d8c0), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
  110. [ 7.993875] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f744f770), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
  111. [ 8.176342] Linux media interface: v0.10
  112. [ 8.205198] Linux video capture interface: v2.00
  113. [ 8.342417] ath9k 0000:07:00.0: setting latency timer to 64
  114. [ 8.392964] ath: EEPROM regdomain: 0x60
  115. [ 8.392972] ath: EEPROM indicates we should expect a direct regpair map
  116. [ 8.392984] ath: Country alpha2 being used: 00
  117. [ 8.392991] ath: Regpair used: 0x60
  118. [ 8.445450] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
  119. [ 8.446796] Registered led device: ath9k-phy0
  120. [ 8.446837] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8660000, irq=23
  121. [ 8.456601] Bluetooth: Core ver 2.16
  122. [ 8.456833] NET: Registered protocol family 31
  123. [ 8.456842] Bluetooth: HCI device and connection manager initialized
  124. [ 8.456854] Bluetooth: HCI socket layer initialized
  125. [ 8.456863] Bluetooth: L2CAP socket layer initialized
  126. [ 8.457107] Bluetooth: SCO socket layer initialized
  127. [ 8.602179] Bluetooth: Generic Bluetooth USB driver ver 0.6
  128. [ 8.602289] usbcore: registered new interface driver btusb
  129. [ 8.603868] Bluetooth: Atheros AR30xx firmware driver ver 1.0
  130. [ 8.656479] rts_pstor: device scan complete
  131. [ 8.656994] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
  132. [ 8.657429] Bad LUN (0:1)
  133. [ 8.657789] Bad target number (1:0)
  134. [ 8.659065] Bad target number (2:0)
  135. [ 8.659229] Bad target number (3:0)
  136. [ 8.659390] Bad target number (4:0)
  137. [ 8.659549] Bad target number (5:0)
  138. [ 8.659840] Bad target number (6:0)
  139. [ 8.660049] Bad target number (7:0)
  140. [ 8.661027] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  141. [ 8.661241] sd 2:0:0:0: Attached scsi generic sg2 type 0
  142. [ 8.674030] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
  143. [ 8.674270] usb 4-2: firmware: agent aborted loading ath3k-1.fw (not found?)
  144. [ 8.676218] Bluetooth: Error loading firmware
  145. [ 8.676246] ath3k: probe of 4-2:1.0 failed with error -5
  146. [ 8.676338] usbcore: registered new interface driver ath3k
  147. [ 8.688163] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b293)
  148. [ 8.705709] input: HP Webcam-101 as /devices/pci0000:00/0000:00:16.2/usb2/2-2/2-2:1.0/input/input9
  149. [ 8.705950] usbcore: registered new interface driver uvcvideo
  150. [ 8.705958] USB Video Class driver (1.1.1)
  151. [ 8.731906] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
  152. [ 8.943289] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  153. [ 8.943352] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  154. [ 9.078957] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
  155. [ 9.079399] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
  156. [ 9.420817] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
  157. [ 9.423863] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
  158. [ 9.424135] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
  159. [ 10.114543] Adding 3071996k swap on /dev/sda2. Priority:-1 extents:1 across:3071996k
  160. [ 10.127113] EXT4-fs (sda1): re-mounted. Opts: (null)
  161. [ 10.668916] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  162. [ 10.888579] loop: module loaded
  163. [ 11.897935] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  164. [ 12.762138] fuse init (API version 7.17)
  165. [ 14.135379] vboxdrv: Found 2 processor cores.
  166. [ 14.135873] vboxdrv: fAsync=0 offMin=0x4a6 offMax=0xfee
  167. [ 14.136093] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
  168. [ 14.136103] vboxdrv: Successfully loaded version 4.0.10_Debian (interface 0x00180000).
  169. [ 14.495943] vboxguest: VirtualBox Guest PCI device not found.
  170. [ 16.587671] r8169 0000:06:00.0: firmware: agent loaded rtl_nic/rtl8105e-1.fw into memory
  171. [ 16.779345] r8169 0000:06:00.0: eth2: link down
  172. [ 16.779369] r8169 0000:06:00.0: eth2: link down
  173. [ 16.779836] ADDRCONF(NETDEV_UP): eth2: link is not ready
  174. [ 18.450294] r8169 0000:06:00.0: eth2: link up
  175. [ 18.450850] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  176. [ 18.797674] Bluetooth: RFCOMM TTY layer initialized
  177. [ 18.797692] Bluetooth: RFCOMM socket layer initialized
  178. [ 18.797700] Bluetooth: RFCOMM ver 1.11
  179. [ 18.952221] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  180. [ 18.952233] Bluetooth: BNEP filters: protocol multicast
  181. [ 19.020354] Bridge firewalling registered
  182. [ 19.319309] sshd (1523): /proc/1523/oom_adj is deprecated, please use /proc/1523/oom_score_adj instead.
  183. [ 20.619262] lp: driver loaded but no devices found
  184. [ 20.851270] ppdev: user-space parallel port driver
  185. [ 23.114985] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  186. [ 23.115087] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  187. [ 23.128992] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
  188. [ 23.131420] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input15
  189. [ 23.183467] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input16
  190. [ 23.198250] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
  191. [ 23.200315] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
  192. [ 28.976222] eth2: no IPv6 routers present
  193. [ 3302.313790] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  194. [ 3302.313802] PM: Basic memory bitmaps created
  195. [ 3302.313807] PM: Syncing filesystems ... done.
  196. [ 3302.472529] Freezing user space processes ... (elapsed 0.04 seconds) done.
  197. [ 3302.520625] PM: Preallocating image memory... done (allocated 226503 pages)
  198. [ 3304.108051] PM: Allocated 906012 kbytes in 1.58 seconds (573.42 MB/s)
  199. [ 3304.108056] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  200. [ 3304.124787] Suspending console(s) (use no_console_suspend to debug)
  201. [ 3304.126548] Ready to suspend
  202. [ 3304.228511] ACPI handle has no context!
  203. [ 3304.328178] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  204. [ 3305.140704] PM: freeze of devices complete after 1015.899 msecs
  205. [ 3305.141510] PM: late freeze of devices complete after 0.798 msecs
  206. [ 3305.141555] ACPI: Preparing to enter system sleep state S4
  207. [ 3305.143876] PM: Saving platform NVS memory
  208. [ 3305.161842] Disabling non-boot CPUs ...
  209. [ 3305.164215] CPU 1 is now offline
  210. [ 3305.165213] PM: Creating hibernation image:
  211. [ 3305.168190] PM: Need to copy 181157 pages
  212. [ 3305.168190] PM: Normal pages needed: 90498 + 1024, available pages: 148724
  213. [ 3305.168190] PM: Restoring platform NVS memory
  214. [ 3305.168190] microcode: CPU0: new patch_level=0x0500010d
  215. [ 3305.172992] Enabling non-boot CPUs ...
  216. [ 3305.173263] Booting Node 0 Processor 1 APIC 0x1
  217. [ 3305.173267] smpboot cpu 1: start_ip = 9b000
  218. [ 3305.164184] Initializing CPU#1
  219. [ 3305.164184] Calibrating delay loop (skipped) already calibrated this CPU
  220. [ 3305.205193] NMI watchdog enabled, takes one hw-pmu counter.
  221. [ 3305.209628] microcode: CPU1: new patch_level=0x0500010d
  222. [ 3305.214007] CPU1 is up
  223. [ 3305.217115] ACPI: Waking up from system sleep state S4
  224. [ 3305.408582] PM: early restore of devices complete after 1.374 msecs
  225. [ 3305.483220] radeon 0000:00:01.0: setting latency timer to 64
  226. [ 3305.483254] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  227. [ 3305.483324] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  228. [ 3305.484225] Ready to resume
  229. [ 3305.484245] rts_pstor 0000:02:00.0: setting latency timer to 64
  230. [ 3305.484253] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  231. [ 3305.496924] sd 0:0:0:0: [sda] Starting disk
  232. [ 3305.540023] usb usb3: root hub lost power or was reset
  233. [ 3305.544072] usb usb4: root hub lost power or was reset
  234. [ 3305.548129] usb usb5: root hub lost power or was reset
  235. [ 3305.548213] usb usb1: root hub lost power or was reset
  236. [ 3305.548264] usb usb2: root hub lost power or was reset
  237. [ 3305.896198] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  238. [ 3305.896215] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
  239. [ 3305.896671] radeon 0000:00:01.0: WB enabled
  240. [ 3305.896679] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  241. [ 3305.912990] [drm] ring test on 0 succeeded in 1 usecs
  242. [ 3305.913081] [drm] ib test on ring 0 succeeded in 0 usecs
  243. [ 3305.972379] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  244. [ 3305.972430] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  245. [ 3305.975423] ata1.00: configured for UDMA/100
  246. [ 3305.976245] ata2.00: configured for UDMA/100
  247. [ 3306.140158] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  248. [ 3306.408311] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  249. [ 3306.824702] usb 1-3.3: reset low-speed USB device number 4 using ehci_hcd
  250. [ 3307.177564] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
  251. [ 3307.741115] usb 1-3.1.2: reset low-speed USB device number 5 using ehci_hcd
  252. [ 3308.042691] PM: restore of devices complete after 2559.679 msecs
  253. [ 3308.042886] PM: Image restored successfully.
  254. [ 3308.042890] Restarting tasks ... done.
  255. [ 3308.046827] PM: Basic memory bitmaps freed
  256. [ 3308.046842] video LNXVIDEO:00: Restoring backlight state
  257. [ 3316.263113] r8169 0000:06:00.0: eth2: link down
  258. [ 3316.263137] r8169 0000:06:00.0: eth2: link down
  259. [ 3316.264526] ADDRCONF(NETDEV_UP): eth2: link is not ready
  260. [ 3317.882945] r8169 0000:06:00.0: eth2: link up
  261. [ 3317.883543] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  262. [ 3328.720121] eth2: no IPv6 routers present
  263. [ 6329.997580] usb 1-3.1.4: new high-speed USB device number 6 using ehci_hcd
  264. [ 6330.090452] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  265. [ 6330.090467] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  266. [ 6330.090477] usb 1-3.1.4: Product: Ext HDD 1021
  267. [ 6330.090485] usb 1-3.1.4: Manufacturer: Western Digital
  268. [ 6330.090493] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
  269. [ 6330.346913] Initializing USB Mass Storage driver...
  270. [ 6330.347580] scsi3 : usb-storage 1-3.1.4:1.0
  271. [ 6330.347850] usbcore: registered new interface driver usb-storage
  272. [ 6330.347858] USB Mass Storage support registered.
  273. [ 6331.347185] scsi 3:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
  274. [ 6331.350673] sd 3:0:0:0: Attached scsi generic sg3 type 0
  275. [ 6331.354225] sd 3:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
  276. [ 6331.355457] sd 3:0:0:0: [sdc] Test WP failed, assume Write Enabled
  277. [ 6331.356670] sd 3:0:0:0: [sdc] Asking for cache data failed
  278. [ 6331.356682] sd 3:0:0:0: [sdc] Assuming drive cache: write through
  279. [ 6331.359684] sd 3:0:0:0: [sdc] Test WP failed, assume Write Enabled
  280. [ 6331.360898] sd 3:0:0:0: [sdc] Asking for cache data failed
  281. [ 6331.360916] sd 3:0:0:0: [sdc] Assuming drive cache: write through
  282. [ 6331.373252] sdc: sdc1
  283. [ 6331.376214] sd 3:0:0:0: [sdc] Test WP failed, assume Write Enabled
  284. [ 6331.377295] sd 3:0:0:0: [sdc] Asking for cache data failed
  285. [ 6331.377307] sd 3:0:0:0: [sdc] Assuming drive cache: write through
  286. [ 6331.377318] sd 3:0:0:0: [sdc] Attached SCSI disk
  287. [ 6333.824104] kjournald starting. Commit interval 5 seconds
  288. [ 6333.825445] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  289. [ 6333.828335] EXT3-fs (sdc1): using internal journal
  290. [ 6333.828351] EXT3-fs (sdc1): recovery complete
  291. [ 6333.837669] EXT3-fs (sdc1): mounted filesystem with ordered data mode
  292. [10719.041127] usb 1-3.4: new high-speed USB device number 7 using ehci_hcd
  293. [10719.134058] usb 1-3.4: New USB device found, idVendor=0bc2, idProduct=3300
  294. [10719.134073] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  295. [10719.134084] usb 1-3.4: Product: Desktop
  296. [10719.134091] usb 1-3.4: Manufacturer: Seagate
  297. [10719.134098] usb 1-3.4: SerialNumber: 2GHJ92L7
  298. [10719.135980] scsi4 : usb-storage 1-3.4:1.0
  299. [10720.138004] scsi 4:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4
  300. [10720.141325] sd 4:0:0:0: Attached scsi generic sg4 type 0
  301. [10720.144559] sd 4:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
  302. [10720.145809] sd 4:0:0:0: [sdd] Write Protect is off
  303. [10720.145821] sd 4:0:0:0: [sdd] Mode Sense: 2f 08 00 00
  304. [10720.146432] sd 4:0:0:0: [sdd] No Caching mode page present
  305. [10720.146444] sd 4:0:0:0: [sdd] Assuming drive cache: write through
  306. [10720.149811] sd 4:0:0:0: [sdd] No Caching mode page present
  307. [10720.149826] sd 4:0:0:0: [sdd] Assuming drive cache: write through
  308. [10720.173715] sdd: sdd1
  309. [10720.178220] sd 4:0:0:0: [sdd] No Caching mode page present
  310. [10720.178237] sd 4:0:0:0: [sdd] Assuming drive cache: write through
  311. [10720.178249] sd 4:0:0:0: [sdd] Attached SCSI disk
  312. [10721.416073] kjournald starting. Commit interval 5 seconds
  313. [10721.416891] EXT3-fs (sdd1): warning: checktime reached, running e2fsck is recommended
  314. [10721.418343] EXT3-fs (sdd1): using internal journal
  315. [10721.418359] EXT3-fs (sdd1): mounted filesystem with ordered data mode
  316. [13875.112872] usb 1-3.4: reset high-speed USB device number 7 using ehci_hcd
  317. [13993.670742] usb 1-3.4: USB disconnect, device number 7
  318. [17304.849387] usb 1-3.1.4: USB disconnect, device number 6
  319. [17305.056892] usb 1-3.1.4: new high-speed USB device number 8 using ehci_hcd
  320. [17305.101786] hub 1-3.1:1.0: unable to enumerate USB device on port 4
  321. [19847.016362] usb 1-1: new high-speed USB device number 9 using ehci_hcd
  322. [19847.372167] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  323. [19847.372182] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  324. [19847.372192] usb 1-1: Product: DataTraveler G3
  325. [19847.372200] usb 1-1: Manufacturer: Kingston
  326. [19847.372207] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  327. [19847.373814] scsi5 : usb-storage 1-1:1.0
  328. [19848.374600] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  329. [19848.378294] sd 5:0:0:0: Attached scsi generic sg3 type 0
  330. [19848.380633] sd 5:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  331. [19848.381202] sd 5:0:0:0: [sdc] Write Protect is off
  332. [19848.381214] sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 00
  333. [19848.381701] sd 5:0:0:0: [sdc] No Caching mode page present
  334. [19848.381712] sd 5:0:0:0: [sdc] Assuming drive cache: write through
  335. [19848.387707] sd 5:0:0:0: [sdc] No Caching mode page present
  336. [19848.387723] sd 5:0:0:0: [sdc] Assuming drive cache: write through
  337. [19848.392257] sdc: sdc1
  338. [19848.398479] sd 5:0:0:0: [sdc] No Caching mode page present
  339. [19848.398495] sd 5:0:0:0: [sdc] Assuming drive cache: write through
  340. [19848.398508] sd 5:0:0:0: [sdc] Attached SCSI removable disk
  341. [19849.566285] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  342. [19849.568806] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  343. [19912.422778] usb 1-1: USB disconnect, device number 9
  344. [21925.401807] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  345. [21925.401819] PM: Basic memory bitmaps created
  346. [21925.401823] PM: Syncing filesystems ... done.
  347. [21925.541462] Freezing user space processes ... (elapsed 0.01 seconds) done.
  348. [21925.556612] PM: Preallocating image memory... done (allocated 226505 pages)
  349. [21926.746775] PM: Allocated 906020 kbytes in 1.19 seconds (761.36 MB/s)
  350. [21926.746781] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  351. [21926.760582] Suspending console(s) (use no_console_suspend to debug)
  352. [21926.761772] Ready to suspend
  353. [21926.762833] ACPI handle has no context!
  354. [21926.964188] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  355. [21927.776484] PM: freeze of devices complete after 1015.885 msecs
  356. [21927.777472] PM: late freeze of devices complete after 0.981 msecs
  357. [21927.777518] ACPI: Preparing to enter system sleep state S4
  358. [21927.779742] PM: Saving platform NVS memory
  359. [21927.797761] Disabling non-boot CPUs ...
  360. [21927.800195] CPU 1 is now offline
  361. [21927.801288] PM: Creating hibernation image:
  362. [21927.804144] PM: Need to copy 176077 pages
  363. [21927.804144] PM: Normal pages needed: 80133 + 1024, available pages: 148519
  364. [21927.804144] PM: Restoring platform NVS memory
  365. [21927.804144] microcode: CPU0: new patch_level=0x0500010d
  366. [21927.809068] Enabling non-boot CPUs ...
  367. [21927.809345] Booting Node 0 Processor 1 APIC 0x1
  368. [21927.809349] smpboot cpu 1: start_ip = 9b000
  369. [21927.800130] Initializing CPU#1
  370. [21927.800130] Calibrating delay loop (skipped) already calibrated this CPU
  371. [21927.841268] NMI watchdog enabled, takes one hw-pmu counter.
  372. [21927.845706] microcode: CPU1: new patch_level=0x0500010d
  373. [21927.850091] CPU1 is up
  374. [21927.853206] ACPI: Waking up from system sleep state S4
  375. [21928.044579] PM: early restore of devices complete after 1.377 msecs
  376. [21928.119485] radeon 0000:00:01.0: setting latency timer to 64
  377. [21928.119500] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  378. [21928.119571] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  379. [21928.119945] Ready to resume
  380. [21928.120103] rts_pstor 0000:02:00.0: setting latency timer to 64
  381. [21928.120111] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  382. [21928.136118] sd 0:0:0:0: [sda] Starting disk
  383. [21928.176240] usb usb3: root hub lost power or was reset
  384. [21928.176383] usb usb1: root hub lost power or was reset
  385. [21928.180400] usb usb4: root hub lost power or was reset
  386. [21928.184458] usb usb5: root hub lost power or was reset
  387. [21928.184559] usb usb2: root hub lost power or was reset
  388. [21928.532195] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  389. [21928.533576] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  390. [21928.533985] radeon 0000:00:01.0: WB enabled
  391. [21928.533992] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  392. [21928.550305] [drm] ring test on 0 succeeded in 1 usecs
  393. [21928.550389] [drm] ib test on ring 0 succeeded in 0 usecs
  394. [21928.624203] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  395. [21928.624255] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  396. [21928.626922] ata1.00: configured for UDMA/100
  397. [21928.628341] ata2.00: configured for UDMA/100
  398. [21928.776145] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
  399. [21929.044432] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  400. [21929.460746] usb 1-3.3: reset low-speed USB device number 4 using ehci_hcd
  401. [21929.813361] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
  402. [21930.373038] usb 1-3.1.2: reset low-speed USB device number 5 using ehci_hcd
  403. [21930.673043] PM: restore of devices complete after 2553.768 msecs
  404. [21930.673242] PM: Image restored successfully.
  405. [21930.673247] Restarting tasks ... done.
  406. [21930.679939] PM: Basic memory bitmaps freed
  407. [21930.679951] video LNXVIDEO:00: Restoring backlight state
  408. [21934.455409] r8169 0000:06:00.0: eth2: link down
  409. [21934.455465] r8169 0000:06:00.0: eth2: link down
  410. [21934.456765] ADDRCONF(NETDEV_UP): eth2: link is not ready
  411. [21936.150081] r8169 0000:06:00.0: eth2: link up
  412. [21936.150567] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  413. [21947.096275] eth2: no IPv6 routers present
  414. [24714.069474] usb 1-3.1.3: new full-speed USB device number 10 using ehci_hcd
  415. [24714.170344] usb 1-3.1.3: New USB device found, idVendor=04f9, idProduct=0027
  416. [24714.170359] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  417. [24714.170370] usb 1-3.1.3: Product: HL-2030 series
  418. [24714.170378] usb 1-3.1.3: Manufacturer: Brother
  419. [24714.170386] usb 1-3.1.3: SerialNumber: M0J298450
  420. [24715.006917] usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
  421. [24715.007599] usbcore: registered new interface driver usblp
  422. [24716.187472] usb 1-3.1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
  423. [24786.564226] usb 1-3.1.3: USB disconnect, device number 10
  424. [24786.564997] usblp0: removed
  425. [25828.801365] usb 1-3.1.4: new high-speed USB device number 11 using ehci_hcd
  426. [25828.894361] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  427. [25828.894376] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  428. [25828.894386] usb 1-3.1.4: Product: Ext HDD 1021
  429. [25828.894393] usb 1-3.1.4: Manufacturer: Western Digital
  430. [25828.894401] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
  431. [25828.896318] scsi6 : usb-storage 1-3.1.4:1.0
  432. [25829.899285] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
  433. [25829.903688] sd 6:0:0:0: Attached scsi generic sg3 type 0
  434. [25829.905915] sd 6:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
  435. [25829.907767] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
  436. [25829.910342] sd 6:0:0:0: [sdc] Asking for cache data failed
  437. [25829.910359] sd 6:0:0:0: [sdc] Assuming drive cache: write through
  438. [25829.914879] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
  439. [25829.916077] sd 6:0:0:0: [sdc] Asking for cache data failed
  440. [25829.916097] sd 6:0:0:0: [sdc] Assuming drive cache: write through
  441. [25829.937371] sdc: sdc1
  442. [25829.940905] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
  443. [25829.942541] sd 6:0:0:0: [sdc] Asking for cache data failed
  444. [25829.942555] sd 6:0:0:0: [sdc] Assuming drive cache: write through
  445. [25829.942566] sd 6:0:0:0: [sdc] Attached SCSI disk
  446. [25831.118178] kjournald starting. Commit interval 5 seconds
  447. [25831.119742] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  448. [25831.122121] EXT3-fs (sdc1): using internal journal
  449. [25831.122143] EXT3-fs (sdc1): mounted filesystem with ordered data mode
  450. [30727.732580] usb 1-3.1.3: new full-speed USB device number 12 using ehci_hcd
  451. [30727.832198] usb 1-3.1.3: New USB device found, idVendor=04f9, idProduct=0027
  452. [30727.832210] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  453. [30727.832218] usb 1-3.1.3: Product: HL-2030 series
  454. [30727.832224] usb 1-3.1.3: Manufacturer: Brother
  455. [30727.832230] usb 1-3.1.3: SerialNumber: M0J298450
  456. [30727.837491] usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
  457. [30729.327151] usb 1-3.1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
  458. [30818.914145] usb 1-3.1.3: USB disconnect, device number 12
  459. [30818.915081] usblp0: removed
  460. [30922.848437] usb 1-1: new high-speed USB device number 13 using ehci_hcd
  461. [30923.075948] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  462. [30923.075963] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  463. [30923.075973] usb 1-1: Product: DataTraveler G3
  464. [30923.075980] usb 1-1: Manufacturer: Kingston
  465. [30923.075987] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  466. [30923.077619] scsi7 : usb-storage 1-1:1.0
  467. [30924.078469] scsi 7:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  468. [30924.084358] sd 7:0:0:0: [sdd] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  469. [30924.084559] sd 7:0:0:0: Attached scsi generic sg4 type 0
  470. [30924.084993] sd 7:0:0:0: [sdd] Write Protect is off
  471. [30924.085006] sd 7:0:0:0: [sdd] Mode Sense: 03 00 00 00
  472. [30924.085572] sd 7:0:0:0: [sdd] No Caching mode page present
  473. [30924.085584] sd 7:0:0:0: [sdd] Assuming drive cache: write through
  474. [30924.089985] sd 7:0:0:0: [sdd] No Caching mode page present
  475. [30924.090002] sd 7:0:0:0: [sdd] Assuming drive cache: write through
  476. [30924.092359] sdd: sdd1
  477. [30924.096527] sd 7:0:0:0: [sdd] No Caching mode page present
  478. [30924.096544] sd 7:0:0:0: [sdd] Assuming drive cache: write through
  479. [30924.096555] sd 7:0:0:0: [sdd] Attached SCSI removable disk
  480. [30925.226808] EXT4-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended
  481. [30925.229683] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
  482. [30944.849026] usb 1-3.1.4: USB disconnect, device number 11
  483. [30945.060775] usb 1-3.1.4: new high-speed USB device number 14 using ehci_hcd
  484. [30945.153888] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  485. [30945.153903] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  486. [30945.153913] usb 1-3.1.4: Product: Ext HDD 1021
  487. [30945.153921] usb 1-3.1.4: Manufacturer: Western Digital
  488. [30945.153928] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
  489. [30945.156549] scsi8 : usb-storage 1-3.1.4:1.0
  490. [30945.360475] usb 1-3.1.4: USB disconnect, device number 14
  491. [30955.105954] usb 1-1: USB disconnect, device number 13
  492. [30970.441752] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  493. [30970.441769] PM: Basic memory bitmaps created
  494. [30970.441773] PM: Syncing filesystems ... done.
  495. [30970.564452] Freezing user space processes ... (elapsed 0.01 seconds) done.
  496. [30970.580640] PM: Preallocating image memory... done (allocated 226503 pages)
  497. [30971.294883] PM: Allocated 906012 kbytes in 0.71 seconds (1276.07 MB/s)
  498. [30971.294890] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  499. [30971.308554] Suspending console(s) (use no_console_suspend to debug)
  500. [30971.309936] Ready to suspend
  501. [30971.310951] ACPI handle has no context!
  502. [30971.512309] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  503. [30972.324667] PM: freeze of devices complete after 1016.096 msecs
  504. [30972.325624] PM: late freeze of devices complete after 0.949 msecs
  505. [30972.325669] ACPI: Preparing to enter system sleep state S4
  506. [30972.327894] PM: Saving platform NVS memory
  507. [30972.345653] Disabling non-boot CPUs ...
  508. [30972.348085] CPU 1 is now offline
  509. [30972.349191] PM: Creating hibernation image:
  510. [30972.352059] PM: Need to copy 180046 pages
  511. [30972.352059] PM: Normal pages needed: 95920 + 1024, available pages: 131776
  512. [30972.352059] PM: Restoring platform NVS memory
  513. [30972.352059] microcode: CPU0: new patch_level=0x0500010d
  514. [30972.356959] Enabling non-boot CPUs ...
  515. [30972.357239] Booting Node 0 Processor 1 APIC 0x1
  516. [30972.357243] smpboot cpu 1: start_ip = 9b000
  517. [30972.348046] Initializing CPU#1
  518. [30972.348046] Calibrating delay loop (skipped) already calibrated this CPU
  519. [30972.389083] NMI watchdog enabled, takes one hw-pmu counter.
  520. [30972.393411] microcode: CPU1: new patch_level=0x0500010d
  521. [30972.397911] CPU1 is up
  522. [30972.401055] ACPI: Waking up from system sleep state S4
  523. [30972.580561] PM: early restore of devices complete after 1.354 msecs
  524. [30972.657798] radeon 0000:00:01.0: setting latency timer to 64
  525. [30972.657813] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  526. [30972.657884] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  527. [30972.658754] Ready to resume
  528. [30972.658812] rts_pstor 0000:02:00.0: setting latency timer to 64
  529. [30972.658820] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  530. [30972.673792] sd 0:0:0:0: [sda] Starting disk
  531. [30972.716204] usb usb3: root hub lost power or was reset
  532. [30972.720260] usb usb4: root hub lost power or was reset
  533. [30972.724318] usb usb5: root hub lost power or was reset
  534. [30972.724421] usb usb1: root hub lost power or was reset
  535. [30972.724472] usb usb2: root hub lost power or was reset
  536. [30973.072271] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
  537. [30973.072691] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  538. [30973.073101] radeon 0000:00:01.0: WB enabled
  539. [30973.073108] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  540. [30973.089404] [drm] ring test on 0 succeeded in 1 usecs
  541. [30973.089489] [drm] ib test on ring 0 succeeded in 0 usecs
  542. [30973.148354] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  543. [30973.148410] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  544. [30973.151734] ata1.00: configured for UDMA/100
  545. [30973.152461] ata2.00: configured for UDMA/100
  546. [30973.316175] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  547. [30973.584190] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  548. [30974.000785] usb 1-3.3: reset low-speed USB device number 4 using ehci_hcd
  549. [30974.353399] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
  550. [30974.913075] usb 1-3.1.2: reset low-speed USB device number 5 using ehci_hcd
  551. [30975.213204] PM: restore of devices complete after 2555.634 msecs
  552. [30975.213405] PM: Image restored successfully.
  553. [30975.213410] Restarting tasks ... done.
  554. [30975.221305] PM: Basic memory bitmaps freed
  555. [30975.221319] video LNXVIDEO:00: Restoring backlight state
  556. [30978.287308] r8169 0000:06:00.0: eth2: link down
  557. [30978.287353] r8169 0000:06:00.0: eth2: link down
  558. [30978.288781] ADDRCONF(NETDEV_UP): eth2: link is not ready
  559. [30979.873690] r8169 0000:06:00.0: eth2: link up
  560. [30979.874107] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  561. [30990.808121] eth2: no IPv6 routers present
  562. [52193.553510] usb 1-3.1.3: new full-speed USB device number 15 using ehci_hcd
  563. [52193.653120] usb 1-3.1.3: New USB device found, idVendor=04f9, idProduct=0027
  564. [52193.653136] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  565. [52193.653146] usb 1-3.1.3: Product: HL-2030 series
  566. [52193.653154] usb 1-3.1.3: Manufacturer: Brother
  567. [52193.653161] usb 1-3.1.3: SerialNumber: M0J298450
  568. [52193.657550] usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
  569. [52195.757611] usb 1-3.1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
  570. [52246.593298] usb 1-3.1.3: USB disconnect, device number 15
  571. [52246.594112] usblp0: removed
  572. [52408.344379] usb 1-1: new high-speed USB device number 16 using ehci_hcd
  573. [52408.699920] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  574. [52408.699935] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  575. [52408.699946] usb 1-1: Product: DataTraveler G3
  576. [52408.699954] usb 1-1: Manufacturer: Kingston
  577. [52408.699961] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  578. [52408.702636] scsi9 : usb-storage 1-1:1.0
  579. [52409.702414] scsi 9:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  580. [52409.707214] sd 9:0:0:0: Attached scsi generic sg3 type 0
  581. [52409.707695] sd 9:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  582. [52409.708348] sd 9:0:0:0: [sdc] Write Protect is off
  583. [52409.708366] sd 9:0:0:0: [sdc] Mode Sense: 03 00 00 00
  584. [52409.708897] sd 9:0:0:0: [sdc] No Caching mode page present
  585. [52409.708910] sd 9:0:0:0: [sdc] Assuming drive cache: write through
  586. [52409.713028] sd 9:0:0:0: [sdc] No Caching mode page present
  587. [52409.713043] sd 9:0:0:0: [sdc] Assuming drive cache: write through
  588. [52409.714421] sdc: sdc1
  589. [52409.717781] sd 9:0:0:0: [sdc] No Caching mode page present
  590. [52409.717797] sd 9:0:0:0: [sdc] Assuming drive cache: write through
  591. [52409.717808] sd 9:0:0:0: [sdc] Attached SCSI removable disk
  592. [52411.117039] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  593. [52411.119992] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  594. [52454.964612] usb 1-1: USB disconnect, device number 16
  595. [52465.937630] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  596. [52465.937640] PM: Basic memory bitmaps created
  597. [52465.937644] PM: Syncing filesystems ... done.
  598. [52466.068325] Freezing user space processes ... (elapsed 0.01 seconds) done.
  599. [52466.084747] PM: Preallocating image memory... done (allocated 226503 pages)
  600. [52466.904067] PM: Allocated 906012 kbytes in 0.81 seconds (1118.53 MB/s)
  601. [52466.904073] Freezing remaining freezable tasks ... (elapsed 0.03 seconds) done.
  602. [52466.936554] Suspending console(s) (use no_console_suspend to debug)
  603. [52466.937012] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  604. [52466.937889] Ready to suspend
  605. [52466.938369] ACPI handle has no context!
  606. [52467.952437] PM: freeze of devices complete after 1015.864 msecs
  607. [52467.953390] PM: late freeze of devices complete after 0.946 msecs
  608. [52467.953436] ACPI: Preparing to enter system sleep state S4
  609. [52467.955746] PM: Saving platform NVS memory
  610. [52467.973861] Disabling non-boot CPUs ...
  611. [52467.976320] CPU 1 is now offline
  612. [52467.977564] PM: Creating hibernation image:
  613. [52467.980294] PM: Need to copy 186362 pages
  614. [52467.980294] PM: Normal pages needed: 92131 + 1024, available pages: 139947
  615. [52467.980294] PM: Restoring platform NVS memory
  616. [52467.980294] microcode: CPU0: new patch_level=0x0500010d
  617. [52467.985332] Enabling non-boot CPUs ...
  618. [52467.985615] Booting Node 0 Processor 1 APIC 0x1
  619. [52467.985619] smpboot cpu 1: start_ip = 9b000
  620. [52467.976288] Initializing CPU#1
  621. [52467.976288] Calibrating delay loop (skipped) already calibrated this CPU
  622. [52468.017422] NMI watchdog enabled, takes one hw-pmu counter.
  623. [52468.021513] microcode: CPU1: new patch_level=0x0500010d
  624. [52468.026167] CPU1 is up
  625. [52468.029466] ACPI: Waking up from system sleep state S4
  626. [52468.208605] PM: early restore of devices complete after 1.385 msecs
  627. [52468.286976] radeon 0000:00:01.0: setting latency timer to 64
  628. [52468.286990] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  629. [52468.287058] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  630. [52468.292478] Ready to resume
  631. [52468.292579] rts_pstor 0000:02:00.0: setting latency timer to 64
  632. [52468.292588] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  633. [52468.308636] sd 0:0:0:0: [sda] Starting disk
  634. [52468.344086] usb usb3: root hub lost power or was reset
  635. [52468.348139] usb usb4: root hub lost power or was reset
  636. [52468.352197] usb usb5: root hub lost power or was reset
  637. [52468.352304] usb usb1: root hub lost power or was reset
  638. [52468.352347] usb usb2: root hub lost power or was reset
  639. [52468.700237] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
  640. [52468.700397] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  641. [52468.700844] radeon 0000:00:01.0: WB enabled
  642. [52468.700851] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  643. [52468.717136] [drm] ring test on 0 succeeded in 1 usecs
  644. [52468.717222] [drm] ib test on ring 0 succeeded in 0 usecs
  645. [52468.776380] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  646. [52468.776437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  647. [52468.779462] ata1.00: configured for UDMA/100
  648. [52468.780311] ata2.00: configured for UDMA/100
  649. [52468.945312] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  650. [52469.212694] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  651. [52469.628668] usb 1-3.3: reset low-speed USB device number 4 using ehci_hcd
  652. [52469.981158] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
  653. [52470.540886] usb 1-3.1.2: reset low-speed USB device number 5 using ehci_hcd
  654. [52470.841311] PM: restore of devices complete after 2554.559 msecs
  655. [52470.841508] PM: Image restored successfully.
  656. [52470.841512] Restarting tasks ... done.
  657. [52470.847254] PM: Basic memory bitmaps freed
  658. [52470.847266] video LNXVIDEO:00: Restoring backlight state
  659. [52474.067162] r8169 0000:06:00.0: eth2: link down
  660. [52474.067187] r8169 0000:06:00.0: eth2: link down
  661. [52474.068047] ADDRCONF(NETDEV_UP): eth2: link is not ready
  662. [52475.666526] r8169 0000:06:00.0: eth2: link up
  663. [52475.667058] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  664. [52485.720049] eth2: no IPv6 routers present
  665. [80008.932243] usb 1-2: new high-speed USB device number 17 using ehci_hcd
  666. [80009.289443] usb 1-2: New USB device found, idVendor=0951, idProduct=1643
  667. [80009.289458] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  668. [80009.289468] usb 1-2: Product: DataTraveler G3
  669. [80009.289476] usb 1-2: Manufacturer: Kingston
  670. [80009.289483] usb 1-2: SerialNumber: 001CC05FE935F0A0B9281337
  671. [80009.291121] scsi10 : usb-storage 1-2:1.0
  672. [80010.290603] scsi 10:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  673. [80010.295842] sd 10:0:0:0: Attached scsi generic sg3 type 0
  674. [80010.295986] sd 10:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  675. [80010.297624] sd 10:0:0:0: [sdc] Write Protect is off
  676. [80010.297641] sd 10:0:0:0: [sdc] Mode Sense: 03 00 00 00
  677. [80010.298350] sd 10:0:0:0: [sdc] No Caching mode page present
  678. [80010.298362] sd 10:0:0:0: [sdc] Assuming drive cache: write through
  679. [80010.304134] sd 10:0:0:0: [sdc] No Caching mode page present
  680. [80010.304149] sd 10:0:0:0: [sdc] Assuming drive cache: write through
  681. [80010.305412] sdc: sdc1
  682. [80010.309598] sd 10:0:0:0: [sdc] No Caching mode page present
  683. [80010.309613] sd 10:0:0:0: [sdc] Assuming drive cache: write through
  684. [80010.309625] sd 10:0:0:0: [sdc] Attached SCSI removable disk
  685. [80013.163403] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  686. [80013.166488] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  687. [80037.387841] usb 1-2: USB disconnect, device number 17
  688. [80251.867640] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
  689. [81080.009902] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  690. [81080.009913] PM: Basic memory bitmaps created
  691. [81080.009917] PM: Syncing filesystems ... done.
  692. [81080.146892] Freezing user space processes ... (elapsed 0.01 seconds) done.
  693. [81080.160479] PM: Preallocating image memory... done (allocated 226503 pages)
  694. [81080.993283] PM: Allocated 906012 kbytes in 0.83 seconds (1091.58 MB/s)
  695. [81080.993289] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  696. [81081.008602] Suspending console(s) (use no_console_suspend to debug)
  697. [81081.012658] Ready to suspend
  698. [81081.116485] ACPI handle has no context!
  699. [81081.216314] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  700. [81082.028653] PM: freeze of devices complete after 1020.035 msecs
  701. [81082.029610] PM: late freeze of devices complete after 0.949 msecs
  702. [81082.029655] ACPI: Preparing to enter system sleep state S4
  703. [81082.031881] PM: Saving platform NVS memory
  704. [81082.050050] Disabling non-boot CPUs ...
  705. [81082.052554] CPU 1 is now offline
  706. [81082.053666] PM: Creating hibernation image:
  707. [81082.056507] PM: Need to copy 183648 pages
  708. [81082.056507] PM: Normal pages needed: 91580 + 1024, available pages: 136116
  709. [81082.056507] PM: Restoring platform NVS memory
  710. [81082.056507] microcode: CPU0: new patch_level=0x0500010d
  711. [81082.061447] Enabling non-boot CPUs ...
  712. [81082.061735] Booting Node 0 Processor 1 APIC 0x1
  713. [81082.061739] smpboot cpu 1: start_ip = 9b000
  714. [81082.052493] Initializing CPU#1
  715. [81082.052493] Calibrating delay loop (skipped) already calibrated this CPU
  716. [81082.093604] NMI watchdog enabled, takes one hw-pmu counter.
  717. [81082.097936] microcode: CPU1: new patch_level=0x0500010d
  718. [81082.102451] CPU1 is up
  719. [81082.105791] ACPI: Waking up from system sleep state S4
  720. [81082.296584] PM: early restore of devices complete after 1.378 msecs
  721. [81082.375719] radeon 0000:00:01.0: setting latency timer to 64
  722. [81082.375751] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  723. [81082.375822] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  724. [81082.376673] Ready to resume
  725. [81082.376693] rts_pstor 0000:02:00.0: setting latency timer to 64
  726. [81082.376701] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  727. [81082.392290] sd 0:0:0:0: [sda] Starting disk
  728. [81082.436084] usb usb3: root hub lost power or was reset
  729. [81082.436225] usb usb1: root hub lost power or was reset
  730. [81082.440239] usb usb4: root hub lost power or was reset
  731. [81082.444296] usb usb5: root hub lost power or was reset
  732. [81082.444396] usb usb2: root hub lost power or was reset
  733. [81082.789283] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  734. [81082.789694] radeon 0000:00:01.0: WB enabled
  735. [81082.789701] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  736. [81082.792268] usb 1-3: reset high-speed USB device number 2 using ehci_hcd
  737. [81082.806009] [drm] ring test on 0 succeeded in 1 usecs
  738. [81082.806098] [drm] ib test on ring 0 succeeded in 0 usecs
  739. [81082.872182] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  740. [81082.872235] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  741. [81082.875470] ata1.00: configured for UDMA/100
  742. [81082.876115] ata2.00: configured for UDMA/100
  743. [81083.036345] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  744. [81083.215468] restoring control 00000000-0000-0000-0000-000000000001/2/3
  745. [81083.304179] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  746. [81083.720832] usb 1-3.3: reset low-speed USB device number 4 using ehci_hcd
  747. [81084.073579] usb 1-3.1: reset high-speed USB device number 3 using ehci_hcd
  748. [81084.637253] usb 1-3.1.2: reset low-speed USB device number 5 using ehci_hcd
  749. [81084.938348] PM: restore of devices complete after 2562.839 msecs
  750. [81084.938546] PM: Image restored successfully.
  751. [81084.938550] Restarting tasks ... done.
  752. [81084.945303] PM: Basic memory bitmaps freed
  753. [81084.945315] video LNXVIDEO:00: Restoring backlight state
  754. [81088.859056] r8169 0000:06:00.0: eth2: link down
  755. [81088.859120] r8169 0000:06:00.0: eth2: link down
  756. [81088.859912] ADDRCONF(NETDEV_UP): eth2: link is not ready
  757. [81090.470577] r8169 0000:06:00.0: eth2: link up
  758. [81090.471105] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  759. [81101.456041] eth2: no IPv6 routers present
  760. [81894.836718] usb 1-3.1.4: new high-speed USB device number 18 using ehci_hcd
  761. [81894.931986] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  762. [81894.932002] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  763. [81894.932050] usb 1-3.1.4: Product: Ext HDD 1021
  764. [81894.932059] usb 1-3.1.4: Manufacturer: Western Digital
  765. [81894.932067] usb 1-3.1.4: SerialNumber: 574D415A4137393533393539
  766. [81894.933935] scsi11 : usb-storage 1-3.1.4:1.0
  767. [81895.935785] scsi 11:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
  768. [81895.939237] sd 11:0:0:0: [sdc] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
  769. [81895.939303] sd 11:0:0:0: Attached scsi generic sg3 type 0
  770. [81895.944389] sd 11:0:0:0: [sdc] Write Protect is off
  771. [81895.944405] sd 11:0:0:0: [sdc] Mode Sense: 17 00 10 08
  772. [81895.946266] sd 11:0:0:0: [sdc] No Caching mode page present
  773. [81895.946283] sd 11:0:0:0: [sdc] Assuming drive cache: write through
  774. [81895.953572] sd 11:0:0:0: [sdc] No Caching mode page present
  775. [81895.953589] sd 11:0:0:0: [sdc] Assuming drive cache: write through
  776. [81895.977309] sdc: sdc1
  777. [81895.983360] sd 11:0:0:0: [sdc] No Caching mode page present
  778. [81895.983375] sd 11:0:0:0: [sdc] Assuming drive cache: write through
  779. [81895.983386] sd 11:0:0:0: [sdc] Attached SCSI disk
  780. [81908.710904] usb 1-3.1.4: USB disconnect, device number 18
  781. [81929.641484] usb 1-3.1.4: new high-speed USB device number 19 using ehci_hcd
  782. [81929.734234] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  783. [81929.734250] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  784. [81929.734260] usb 1-3.1.4: Product: Ext HDD 1021
  785. [81929.734267] usb 1-3.1.4: Manufacturer: Western Digital
  786. [81929.734275] usb 1-3.1.4: SerialNumber: 574D415A4137393533393539
  787. [81929.735958] scsi12 : usb-storage 1-3.1.4:1.0
  788. [81930.739878] scsi 12:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
  789. [81930.745917] sd 12:0:0:0: [sdc] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
  790. [81930.747667] sd 12:0:0:0: Attached scsi generic sg3 type 0
  791. [81930.747752] sd 12:0:0:0: [sdc] Write Protect is off
  792. [81930.747767] sd 12:0:0:0: [sdc] Mode Sense: 17 00 10 08
  793. [81930.749644] sd 12:0:0:0: [sdc] No Caching mode page present
  794. [81930.749659] sd 12:0:0:0: [sdc] Assuming drive cache: write through
  795. [81930.758493] sd 12:0:0:0: [sdc] No Caching mode page present
  796. [81930.758505] sd 12:0:0:0: [sdc] Assuming drive cache: write through
  797. [81930.793420] sdc: sdc1
  798. [81930.800493] sd 12:0:0:0: [sdc] No Caching mode page present
  799. [81930.800504] sd 12:0:0:0: [sdc] Assuming drive cache: write through
  800. [81930.800511] sd 12:0:0:0: [sdc] Attached SCSI disk
  801. [81932.094512] kjournald starting. Commit interval 5 seconds
  802. [81932.095616] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  803. [81932.098532] EXT3-fs (sdc1): using internal journal
  804. [81932.098553] EXT3-fs (sdc1): mounted filesystem with ordered data mode
  805. [83918.043708] usb 1-3.1.4: USB disconnect, device number 19
  806. [107015.027594] usb 1-3: USB disconnect, device number 2
  807. [107015.027607] usb 1-3.1: USB disconnect, device number 3
  808. [107015.027616] usb 1-3.1.2: USB disconnect, device number 5
  809. [107015.038531] usb 1-3.3: USB disconnect, device number 4
  810. [107015.304440] usb 1-3: new high-speed USB device number 20 using ehci_hcd
  811. [107015.438139] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610
  812. [107015.438154] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  813. [107015.438164] usb 1-3: Product: USB2.0 Hub
  814. [107015.439914] hub 1-3:1.0: USB hub found
  815. [107015.441035] hub 1-3:1.0: 4 ports detected
  816. [107015.712766] usb 1-3.1: new high-speed USB device number 21 using ehci_hcd
  817. [107015.807478] usb 1-3.1: New USB device found, idVendor=05e3, idProduct=0610
  818. [107015.807494] usb 1-3.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  819. [107015.807504] usb 1-3.1: Product: USB2.0 Hub
  820. [107015.808972] hub 1-3.1:1.0: USB hub found
  821. [107015.809430] hub 1-3.1:1.0: 4 ports detected
  822. [107015.885697] usb 1-3.3: new low-speed USB device number 22 using ehci_hcd
  823. [107015.982817] usb 1-3.3: New USB device found, idVendor=04f3, idProduct=0103
  824. [107015.982832] usb 1-3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  825. [107015.989397] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.3/1-3.3:1.0/input/input19
  826. [107015.989756] generic-usb 0003:04F3:0103.0004: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:12.2-3.3/input0
  827. [107015.996176] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.3/1-3.3:1.1/input/input20
  828. [107015.996744] generic-usb 0003:04F3:0103.0005: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:12.2-3.3/input1
  829. [107016.081176] usb 1-3.1.2: new low-speed USB device number 23 using ehci_hcd
  830. [107016.176798] usb 1-3.1.2: New USB device found, idVendor=046d, idProduct=c05b
  831. [107016.176813] usb 1-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  832. [107016.176824] usb 1-3.1.2: Product: USB Optical Mouse
  833. [107016.176832] usb 1-3.1.2: Manufacturer: Logitech
  834. [107016.182226] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/input/input21
  835. [107016.183410] generic-usb 0003:046D:C05B.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.2-3.1.2/input0
  836. [107019.188232] usb 1-1: new high-speed USB device number 24 using ehci_hcd
  837. [107019.547724] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  838. [107019.547739] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  839. [107019.547749] usb 1-1: Product: DataTraveler G3
  840. [107019.547756] usb 1-1: Manufacturer: Kingston
  841. [107019.547764] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  842. [107019.549432] scsi13 : usb-storage 1-1:1.0
  843. [107020.550497] scsi 13:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  844. [107020.555128] sd 13:0:0:0: Attached scsi generic sg3 type 0
  845. [107020.555504] sd 13:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  846. [107020.556141] sd 13:0:0:0: [sdc] Write Protect is off
  847. [107020.556154] sd 13:0:0:0: [sdc] Mode Sense: 03 00 00 00
  848. [107020.556853] sd 13:0:0:0: [sdc] No Caching mode page present
  849. [107020.556866] sd 13:0:0:0: [sdc] Assuming drive cache: write through
  850. [107020.560863] sd 13:0:0:0: [sdc] No Caching mode page present
  851. [107020.560877] sd 13:0:0:0: [sdc] Assuming drive cache: write through
  852. [107020.562159] sdc: sdc1
  853. [107020.565354] sd 13:0:0:0: [sdc] No Caching mode page present
  854. [107020.565370] sd 13:0:0:0: [sdc] Assuming drive cache: write through
  855. [107020.565382] sd 13:0:0:0: [sdc] Attached SCSI removable disk
  856. [107023.194474] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  857. [107023.197640] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  858. [107056.031890] usb 1-1: USB disconnect, device number 24
  859. [121176.901684] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  860. [121176.901696] PM: Basic memory bitmaps created
  861. [121176.901700] PM: Syncing filesystems ... done.
  862. [121177.051812] Freezing user space processes ... (elapsed 0.01 seconds) done.
  863. [121177.068651] PM: Preallocating image memory... done (allocated 226503 pages)
  864. [121178.312731] PM: Allocated 906012 kbytes in 1.24 seconds (730.65 MB/s)
  865. [121178.312737] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  866. [121178.328550] Suspending console(s) (use no_console_suspend to debug)
  867. [121178.330038] Ready to suspend
  868. [121178.432497] ACPI handle has no context!
  869. [121178.532308] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  870. [121179.344768] PM: freeze of devices complete after 1016.202 msecs
  871. [121179.345761] PM: late freeze of devices complete after 0.984 msecs
  872. [121179.345806] ACPI: Preparing to enter system sleep state S4
  873. [121179.348115] PM: Saving platform NVS memory
  874. [121179.366088] Disabling non-boot CPUs ...
  875. [121179.368719] CPU 1 is now offline
  876. [121179.369909] PM: Creating hibernation image:
  877. [121179.372693] PM: Need to copy 183475 pages
  878. [121179.372693] PM: Normal pages needed: 87818 + 1024, available pages: 139876
  879. [121179.372693] PM: Restoring platform NVS memory
  880. [121179.372693] microcode: CPU0: new patch_level=0x0500010d
  881. [121179.377677] Enabling non-boot CPUs ...
  882. [121179.377965] Booting Node 0 Processor 1 APIC 0x1
  883. [121179.377969] smpboot cpu 1: start_ip = 9b000
  884. [121179.368682] Initializing CPU#1
  885. [121179.368682] Calibrating delay loop (skipped) already calibrated this CPU
  886. [121179.409842] NMI watchdog enabled, takes one hw-pmu counter.
  887. [121179.414171] microcode: CPU1: new patch_level=0x0500010d
  888. [121179.418667] CPU1 is up
  889. [121179.422023] ACPI: Waking up from system sleep state S4
  890. [121179.600559] PM: early restore of devices complete after 1.344 msecs
  891. [121179.678580] radeon 0000:00:01.0: setting latency timer to 64
  892. [121179.678748] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  893. [121179.678819] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  894. [121179.679424] Ready to resume
  895. [121179.679445] rts_pstor 0000:02:00.0: setting latency timer to 64
  896. [121179.679452] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  897. [121179.695351] sd 0:0:0:0: [sda] Starting disk
  898. [121179.736203] usb usb3: root hub lost power or was reset
  899. [121179.740259] usb usb4: root hub lost power or was reset
  900. [121179.744317] usb usb5: root hub lost power or was reset
  901. [121179.744422] usb usb1: root hub lost power or was reset
  902. [121179.744472] usb usb2: root hub lost power or was reset
  903. [121180.092312] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  904. [121180.095442] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  905. [121180.095848] radeon 0000:00:01.0: WB enabled
  906. [121180.095856] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  907. [121180.112243] [drm] ring test on 0 succeeded in 1 usecs
  908. [121180.112333] [drm] ib test on ring 0 succeeded in 0 usecs
  909. [121180.184353] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  910. [121180.188438] ata2.00: configured for UDMA/100
  911. [121180.192192] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  912. [121180.195101] ata1.00: configured for UDMA/100
  913. [121180.336220] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  914. [121180.515046] restoring control 00000000-0000-0000-0000-000000000001/2/3
  915. [121180.604338] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  916. [121180.833589] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  917. [121181.184922] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  918. [121181.724981] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  919. [121182.007745] PM: restore of devices complete after 2329.414 msecs
  920. [121182.007973] PM: Image restored successfully.
  921. [121182.007977] Restarting tasks ... done.
  922. [121182.009915] PM: Basic memory bitmaps freed
  923. [121182.009931] video LNXVIDEO:00: Restoring backlight state
  924. [121189.487016] r8169 0000:06:00.0: eth2: link down
  925. [121189.487036] r8169 0000:06:00.0: eth2: link down
  926. [121189.487878] ADDRCONF(NETDEV_UP): eth2: link is not ready
  927. [121191.106817] r8169 0000:06:00.0: eth2: link up
  928. [121191.107096] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  929. [121201.568026] eth2: no IPv6 routers present
  930. [125446.878289] sd 2:0:0:0: [sdb] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
  931. [125446.878391] sd 2:0:0:0: [sdb] Cache data unavailable
  932. [125446.878401] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  933. [125446.878583] sd 2:0:0:0: [sdb] Cache data unavailable
  934. [125446.878592] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  935. [125446.880091] sdb: sdb1
  936. [125449.769117] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  937. [125456.745482] sdb: detected capacity change from 1967128576 to 0
  938. [132469.237792] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  939. [132469.237803] PM: Basic memory bitmaps created
  940. [132469.237807] PM: Syncing filesystems ... done.
  941. [132469.528411] Freezing user space processes ... (elapsed 0.01 seconds) done.
  942. [132469.544638] PM: Preallocating image memory... done (allocated 226503 pages)
  943. [132470.498738] PM: Allocated 906012 kbytes in 0.95 seconds (953.69 MB/s)
  944. [132470.498744] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  945. [132470.512551] Suspending console(s) (use no_console_suspend to debug)
  946. [132470.513992] Ready to suspend
  947. [132470.616259] ACPI handle has no context!
  948. [132470.716302] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  949. [132471.528707] PM: freeze of devices complete after 1016.138 msecs
  950. [132471.529668] PM: late freeze of devices complete after 0.953 msecs
  951. [132471.529713] ACPI: Preparing to enter system sleep state S4
  952. [132471.531940] PM: Saving platform NVS memory
  953. [132471.550282] Disabling non-boot CPUs ...
  954. [132471.552802] CPU 1 is now offline
  955. [132471.553992] PM: Creating hibernation image:
  956. [132471.556754] PM: Need to copy 182344 pages
  957. [132471.556754] PM: Normal pages needed: 87335 + 1024, available pages: 140361
  958. [132471.556754] PM: Restoring platform NVS memory
  959. [132471.556754] microcode: CPU0: new patch_level=0x0500010d
  960. [132471.561771] Enabling non-boot CPUs ...
  961. [132471.562065] Booting Node 0 Processor 1 APIC 0x1
  962. [132471.562069] smpboot cpu 1: start_ip = 9b000
  963. [132471.552740] Initializing CPU#1
  964. [132471.552740] Calibrating delay loop (skipped) already calibrated this CPU
  965. [132471.593929] NMI watchdog enabled, takes one hw-pmu counter.
  966. [132471.598287] microcode: CPU1: new patch_level=0x0500010d
  967. [132471.602777] CPU1 is up
  968. [132471.606092] ACPI: Waking up from system sleep state S4
  969. [132471.800562] PM: early restore of devices complete after 1.380 msecs
  970. [132471.877587] radeon 0000:00:01.0: setting latency timer to 64
  971. [132471.877808] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  972. [132471.877878] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  973. [132471.878487] Ready to resume
  974. [132471.878507] rts_pstor 0000:02:00.0: setting latency timer to 64
  975. [132471.878515] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  976. [132471.894132] sd 0:0:0:0: [sda] Starting disk
  977. [132471.936242] usb usb3: root hub lost power or was reset
  978. [132471.936386] usb usb1: root hub lost power or was reset
  979. [132471.940404] usb usb4: root hub lost power or was reset
  980. [132471.944461] usb usb5: root hub lost power or was reset
  981. [132471.944561] usb usb2: root hub lost power or was reset
  982. [132472.292068] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  983. [132472.292247] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  984. [132472.292514] radeon 0000:00:01.0: WB enabled
  985. [132472.292522] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffab2c00
  986. [132472.308844] [drm] ring test on 0 succeeded in 1 usecs
  987. [132472.308932] [drm] ib test on ring 0 succeeded in 0 usecs
  988. [132472.384158] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  989. [132472.384209] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  990. [132472.387231] ata1.00: configured for UDMA/100
  991. [132472.388119] ata2.00: configured for UDMA/100
  992. [132472.471579] restoring control 00000000-0000-0000-0000-000000000001/2/3
  993. [132472.536169] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  994. [132472.804298] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  995. [132473.220750] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  996. [132473.573490] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  997. [132474.132917] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  998. [132474.415140] PM: restore of devices complete after 2537.754 msecs
  999. [132474.415374] PM: Image restored successfully.
  1000. [132474.415378] Restarting tasks ... done.
  1001. [132474.417372] PM: Basic memory bitmaps freed
  1002. [132474.417386] video LNXVIDEO:00: Restoring backlight state
  1003. [132483.899282] r8169 0000:06:00.0: eth2: link down
  1004. [132483.899331] r8169 0000:06:00.0: eth2: link down
  1005. [132483.899884] ADDRCONF(NETDEV_UP): eth2: link is not ready
  1006. [132485.563943] r8169 0000:06:00.0: eth2: link up
  1007. [132485.564507] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  1008. [132496.480198] eth2: no IPv6 routers present
  1009. [137376.892437] usb 1-1: new high-speed USB device number 25 using ehci_hcd
  1010. [137377.252203] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  1011. [137377.252219] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1012. [137377.252229] usb 1-1: Product: DataTraveler G3
  1013. [137377.252236] usb 1-1: Manufacturer: Kingston
  1014. [137377.252243] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  1015. [137377.253896] scsi14 : usb-storage 1-1:1.0
  1016. [137378.255212] scsi 14:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  1017. [137378.258962] sd 14:0:0:0: Attached scsi generic sg3 type 0
  1018. [137378.261976] sd 14:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  1019. [137378.262566] sd 14:0:0:0: [sdc] Write Protect is off
  1020. [137378.262578] sd 14:0:0:0: [sdc] Mode Sense: 03 00 00 00
  1021. [137378.263065] sd 14:0:0:0: [sdc] No Caching mode page present
  1022. [137378.263077] sd 14:0:0:0: [sdc] Assuming drive cache: write through
  1023. [137378.268704] sd 14:0:0:0: [sdc] No Caching mode page present
  1024. [137378.268719] sd 14:0:0:0: [sdc] Assuming drive cache: write through
  1025. [137378.269993] sdc: sdc1
  1026. [137378.274283] sd 14:0:0:0: [sdc] No Caching mode page present
  1027. [137378.274300] sd 14:0:0:0: [sdc] Assuming drive cache: write through
  1028. [137378.274312] sd 14:0:0:0: [sdc] Attached SCSI removable disk
  1029. [137379.854945] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1030. [137379.858220] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  1031. [137921.466809] usb 1-1: USB disconnect, device number 25
  1032. [144455.801833] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1033. [144455.801852] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1034. [144455.801867] Info fld=0x4f18b
  1035. [144455.801874] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1036. [144455.801893] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1037. [144455.801918] end_request: I/O error, dev sr0, sector 1295912
  1038. [144455.801932] Buffer I/O error on device sr0, logical block 161989
  1039. [144456.239103] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1040. [144456.239122] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1041. [144456.239137] Info fld=0x4f18b
  1042. [144456.239145] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1043. [144456.239163] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1044. [144456.239188] end_request: I/O error, dev sr0, sector 1295912
  1045. [144456.239202] Buffer I/O error on device sr0, logical block 161989
  1046. [144456.378794] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1047. [144456.378812] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1048. [144456.378827] Info fld=0x4f18b
  1049. [144456.378834] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1050. [144456.378854] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1051. [144456.378880] end_request: I/O error, dev sr0, sector 1295912
  1052. [144456.378894] Buffer I/O error on device sr0, logical block 161989
  1053. [144456.518561] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1054. [144456.518573] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1055. [144456.518583] Info fld=0x4f18b
  1056. [144456.518588] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1057. [144456.518600] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1058. [144456.518616] end_request: I/O error, dev sr0, sector 1295912
  1059. [144456.518626] Buffer I/O error on device sr0, logical block 161989
  1060. [144456.675425] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1061. [144456.675443] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1062. [144456.675458] Info fld=0x4f18b
  1063. [144456.675466] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1064. [144456.675485] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1065. [144456.675510] end_request: I/O error, dev sr0, sector 1295912
  1066. [144456.675524] Buffer I/O error on device sr0, logical block 161989
  1067. [144456.832093] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1068. [144456.832112] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1069. [144456.832127] Info fld=0x4f18b
  1070. [144456.832135] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1071. [144456.832155] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1072. [144456.832180] end_request: I/O error, dev sr0, sector 1295912
  1073. [144456.832194] Buffer I/O error on device sr0, logical block 161989
  1074. [144456.989105] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1075. [144456.989125] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1076. [144456.989140] Info fld=0x4f18b
  1077. [144456.989147] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1078. [144456.989166] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1079. [144456.989192] end_request: I/O error, dev sr0, sector 1295912
  1080. [144456.989206] Buffer I/O error on device sr0, logical block 161989
  1081. [144457.215672] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1082. [144457.215691] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1083. [144457.215705] Info fld=0x4f18b
  1084. [144457.215713] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1085. [144457.215732] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1086. [144457.215758] end_request: I/O error, dev sr0, sector 1295912
  1087. [144457.215772] Buffer I/O error on device sr0, logical block 161989
  1088. [144457.372220] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1089. [144457.372239] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1090. [144457.372254] Info fld=0x4f18b
  1091. [144457.372262] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1092. [144457.372280] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1093. [144457.372306] end_request: I/O error, dev sr0, sector 1295912
  1094. [144457.372320] Buffer I/O error on device sr0, logical block 161989
  1095. [144457.512009] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1096. [144457.512087] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1097. [144457.512103] Info fld=0x4f18b
  1098. [144457.512111] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
  1099. [144457.512130] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 04 f1 8a 00 00 02 00
  1100. [144457.512156] end_request: I/O error, dev sr0, sector 1295912
  1101. [144457.512172] Buffer I/O error on device sr0, logical block 161989
  1102. [144461.255814] UDF-fs: warning (device sr0): udf_load_vrs: No VRS found
  1103. [144461.255830] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
  1104. [144461.262958] UDF-fs: warning (device sr0): udf_load_vrs: No VRS found
  1105. [144461.262968] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
  1106. [144461.322404] ISO 9660 Extensions: Microsoft Joliet Level 3
  1107. [144461.360466] ISOFS: changing to secondary root
  1108. [145168.125685] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  1109. [145168.125697] PM: Basic memory bitmaps created
  1110. [145168.125701] PM: Syncing filesystems ... done.
  1111. [145168.241474] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1112. [145168.256520] PM: Preallocating image memory... done (allocated 226503 pages)
  1113. [145169.761737] PM: Allocated 906012 kbytes in 1.50 seconds (604.00 MB/s)
  1114. [145169.761743] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1115. [145169.776554] Suspending console(s) (use no_console_suspend to debug)
  1116. [145169.778222] Ready to suspend
  1117. [145169.880312] ACPI handle has no context!
  1118. [145169.980310] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1119. [145170.792708] PM: freeze of devices complete after 1016.137 msecs
  1120. [145170.793706] PM: late freeze of devices complete after 0.989 msecs
  1121. [145170.793751] ACPI: Preparing to enter system sleep state S4
  1122. [145170.795980] PM: Saving platform NVS memory
  1123. [145170.814973] Disabling non-boot CPUs ...
  1124. [145170.920316] CPU 1 is now offline
  1125. [145170.921593] PM: Creating hibernation image:
  1126. [145170.924228] PM: Need to copy 194615 pages
  1127. [145170.924228] PM: Normal pages needed: 101235 + 1024, available pages: 132545
  1128. [145170.924228] PM: Restoring platform NVS memory
  1129. [145170.924228] microcode: CPU0: new patch_level=0x0500010d
  1130. [145170.929390] Enabling non-boot CPUs ...
  1131. [145170.929683] Booting Node 0 Processor 1 APIC 0x1
  1132. [145170.929687] smpboot cpu 1: start_ip = 9b000
  1133. [145170.817422] Initializing CPU#1
  1134. [145170.817422] Calibrating delay loop (skipped) already calibrated this CPU
  1135. [145170.961918] NMI watchdog enabled, takes one hw-pmu counter.
  1136. [145170.966307] microcode: CPU1: new patch_level=0x0500010d
  1137. [145170.970649] CPU1 is up
  1138. [145170.974716] ACPI: Waking up from system sleep state S4
  1139. [145171.168571] PM: early restore of devices complete after 1.355 msecs
  1140. [145171.249668] radeon 0000:00:01.0: setting latency timer to 64
  1141. [145171.249890] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  1142. [145171.249959] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  1143. [145171.250568] Ready to resume
  1144. [145171.250588] rts_pstor 0000:02:00.0: setting latency timer to 64
  1145. [145171.250596] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  1146. [145171.266475] sd 0:0:0:0: [sda] Starting disk
  1147. [145171.308087] usb usb3: root hub lost power or was reset
  1148. [145171.308228] usb usb1: root hub lost power or was reset
  1149. [145171.312241] usb usb4: root hub lost power or was reset
  1150. [145171.316299] usb usb5: root hub lost power or was reset
  1151. [145171.316398] usb usb2: root hub lost power or was reset
  1152. [145171.664225] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  1153. [145171.665203] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  1154. [145171.665664] radeon 0000:00:01.0: WB enabled
  1155. [145171.665672] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffba6c00
  1156. [145171.681977] [drm] ring test on 0 succeeded in 1 usecs
  1157. [145171.682066] [drm] ib test on ring 0 succeeded in 0 usecs
  1158. [145171.756158] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1159. [145171.756213] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1160. [145171.759286] ata1.00: configured for UDMA/100
  1161. [145171.760305] ata2.00: configured for UDMA/100
  1162. [145171.908121] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  1163. [145172.087474] restoring control 00000000-0000-0000-0000-000000000001/2/3
  1164. [145172.176314] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  1165. [145172.592720] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  1166. [145172.945459] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  1167. [145173.513259] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  1168. [145173.796627] PM: restore of devices complete after 2547.165 msecs
  1169. [145173.796858] PM: Image restored successfully.
  1170. [145173.796863] Restarting tasks ... done.
  1171. [145173.800210] PM: Basic memory bitmaps freed
  1172. [145173.800224] video LNXVIDEO:00: Restoring backlight state
  1173. [145184.255282] r8169 0000:06:00.0: eth2: link down
  1174. [145184.255345] r8169 0000:06:00.0: eth2: link down
  1175. [145184.256057] ADDRCONF(NETDEV_UP): eth2: link is not ready
  1176. [145185.896540] r8169 0000:06:00.0: eth2: link up
  1177. [145185.897034] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  1178. [145196.336043] eth2: no IPv6 routers present
  1179. [168833.361349] usb 1-3.1.3: new full-speed USB device number 26 using ehci_hcd
  1180. [168833.460629] usb 1-3.1.3: New USB device found, idVendor=04f9, idProduct=0027
  1181. [168833.460646] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1182. [168833.460656] usb 1-3.1.3: Product: HL-2030 series
  1183. [168833.460664] usb 1-3.1.3: Manufacturer: Brother
  1184. [168833.460671] usb 1-3.1.3: SerialNumber: M0J298450
  1185. [168833.467568] usblp0: USB Bidirectional printer dev 26 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
  1186. [168835.551822] usb 1-3.1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
  1187. [169006.961391] usb 1-3.1.3: USB disconnect, device number 26
  1188. [169006.962123] usblp0: removed
  1189. [170068.397275] usb 1-3.1.3: new full-speed USB device number 27 using ehci_hcd
  1190. [170068.498003] usb 1-3.1.3: New USB device found, idVendor=04f9, idProduct=0027
  1191. [170068.498019] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1192. [170068.498029] usb 1-3.1.3: Product: HL-2030 series
  1193. [170068.498037] usb 1-3.1.3: Manufacturer: Brother
  1194. [170068.498044] usb 1-3.1.3: SerialNumber: M0J298450
  1195. [170068.504747] usblp0: USB Bidirectional printer dev 27 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
  1196. [170069.833156] usb 1-3.1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
  1197. [170104.287259] usb 1-3.1.3: USB disconnect, device number 27
  1198. [170104.288097] usblp0: removed
  1199. [179866.088481] usb 1-2: new high-speed USB device number 28 using ehci_hcd
  1200. [179866.416372] usb 1-2: New USB device found, idVendor=0951, idProduct=1643
  1201. [179866.416387] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1202. [179866.416397] usb 1-2: Product: DataTraveler G3
  1203. [179866.416405] usb 1-2: Manufacturer: Kingston
  1204. [179866.416412] usb 1-2: SerialNumber: 001CC05FE935F0A0B9281337
  1205. [179866.418354] scsi15 : usb-storage 1-2:1.0
  1206. [179867.418136] scsi 15:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  1207. [179867.420690] sd 15:0:0:0: Attached scsi generic sg3 type 0
  1208. [179867.420881] sd 15:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  1209. [179867.421494] sd 15:0:0:0: [sdc] Write Protect is off
  1210. [179867.421507] sd 15:0:0:0: [sdc] Mode Sense: 03 00 00 00
  1211. [179867.421987] sd 15:0:0:0: [sdc] No Caching mode page present
  1212. [179867.421999] sd 15:0:0:0: [sdc] Assuming drive cache: write through
  1213. [179867.427595] sd 15:0:0:0: [sdc] No Caching mode page present
  1214. [179867.427605] sd 15:0:0:0: [sdc] Assuming drive cache: write through
  1215. [179867.428770] sdc: sdc1
  1216. [179867.433979] sd 15:0:0:0: [sdc] No Caching mode page present
  1217. [179867.433991] sd 15:0:0:0: [sdc] Assuming drive cache: write through
  1218. [179867.433999] sd 15:0:0:0: [sdc] Attached SCSI removable disk
  1219. [179869.935077] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1220. [179869.937776] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  1221. [179979.279741] usb 1-2: USB disconnect, device number 28
  1222. [208248.313738] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  1223. [208248.313750] PM: Basic memory bitmaps created
  1224. [208248.313754] PM: Syncing filesystems ... done.
  1225. [208248.474022] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1226. [208248.488544] PM: Preallocating image memory... done (allocated 226505 pages)
  1227. [208250.493426] PM: Allocated 906020 kbytes in 2.00 seconds (453.01 MB/s)
  1228. [208250.493432] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1229. [208250.508591] Suspending console(s) (use no_console_suspend to debug)
  1230. [208250.510128] Ready to suspend
  1231. [208250.612481] ACPI handle has no context!
  1232. [208250.712360] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1233. [208251.524662] PM: freeze of devices complete after 1016.054 msecs
  1234. [208251.525666] PM: late freeze of devices complete after 0.996 msecs
  1235. [208251.525712] ACPI: Preparing to enter system sleep state S4
  1236. [208251.527943] PM: Saving platform NVS memory
  1237. [208251.546640] Disabling non-boot CPUs ...
  1238. [208251.549053] CPU 1 is now offline
  1239. [208251.550168] PM: Creating hibernation image:
  1240. [208251.553005] PM: Need to copy 187475 pages
  1241. [208251.553005] PM: Normal pages needed: 110377 + 1024, available pages: 155967
  1242. [208251.553005] PM: Restoring platform NVS memory
  1243. [208251.553005] microcode: CPU0: new patch_level=0x0500010d
  1244. [208251.558022] Enabling non-boot CPUs ...
  1245. [208251.558330] Booting Node 0 Processor 1 APIC 0x1
  1246. [208251.558334] smpboot cpu 1: start_ip = 9b000
  1247. [208251.548991] Initializing CPU#1
  1248. [208251.548991] Calibrating delay loop (skipped) already calibrated this CPU
  1249. [208251.590209] NMI watchdog enabled, takes one hw-pmu counter.
  1250. [208251.594546] microcode: CPU1: new patch_level=0x0500010d
  1251. [208251.599008] CPU1 is up
  1252. [208251.602862] ACPI: Waking up from system sleep state S4
  1253. [208251.796572] PM: early restore of devices complete after 1.362 msecs
  1254. [208251.875720] radeon 0000:00:01.0: setting latency timer to 64
  1255. [208251.875757] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  1256. [208251.875827] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  1257. [208251.876683] Ready to resume
  1258. [208251.876704] rts_pstor 0000:02:00.0: setting latency timer to 64
  1259. [208251.876712] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  1260. [208251.892237] sd 0:0:0:0: [sda] Starting disk
  1261. [208251.936085] usb usb3: root hub lost power or was reset
  1262. [208251.936228] usb usb1: root hub lost power or was reset
  1263. [208251.940244] usb usb4: root hub lost power or was reset
  1264. [208251.944301] usb usb5: root hub lost power or was reset
  1265. [208251.944401] usb usb2: root hub lost power or was reset
  1266. [208252.289099] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  1267. [208252.289524] radeon 0000:00:01.0: WB enabled
  1268. [208252.289531] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffba6c00
  1269. [208252.293443] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  1270. [208252.305863] [drm] ring test on 0 succeeded in 1 usecs
  1271. [208252.305953] [drm] ib test on ring 0 succeeded in 0 usecs
  1272. [208252.376001] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1273. [208252.376119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1274. [208252.379342] ata1.00: configured for UDMA/100
  1275. [208252.380140] ata2.00: configured for UDMA/100
  1276. [208252.536192] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  1277. [208252.715600] restoring control 00000000-0000-0000-0000-000000000001/2/3
  1278. [208252.804191] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  1279. [208253.220841] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  1280. [208253.573465] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  1281. [208254.141262] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  1282. [208254.424430] PM: restore of devices complete after 2548.921 msecs
  1283. [208254.424673] PM: Image restored successfully.
  1284. [208254.424677] Restarting tasks ... done.
  1285. [208254.428677] PM: Basic memory bitmaps freed
  1286. [208254.428690] video LNXVIDEO:00: Restoring backlight state
  1287. [208264.151267] r8169 0000:06:00.0: eth2: link down
  1288. [208264.151330] r8169 0000:06:00.0: eth2: link down
  1289. [208264.151970] ADDRCONF(NETDEV_UP): eth2: link is not ready
  1290. [208265.792779] r8169 0000:06:00.0: eth2: link up
  1291. [208265.793319] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  1292. [208275.920111] eth2: no IPv6 routers present
  1293. [219902.544372] usb 1-1: new high-speed USB device number 29 using ehci_hcd
  1294. [219902.771735] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  1295. [219902.771751] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1296. [219902.771761] usb 1-1: Product: DataTraveler G3
  1297. [219902.771769] usb 1-1: Manufacturer: Kingston
  1298. [219902.771776] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  1299. [219902.773987] scsi16 : usb-storage 1-1:1.0
  1300. [219903.774756] scsi 16:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  1301. [219903.778229] sd 16:0:0:0: Attached scsi generic sg3 type 0
  1302. [219903.778881] sd 16:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  1303. [219903.780668] sd 16:0:0:0: [sdc] Write Protect is off
  1304. [219903.780687] sd 16:0:0:0: [sdc] Mode Sense: 03 00 00 00
  1305. [219903.781248] sd 16:0:0:0: [sdc] No Caching mode page present
  1306. [219903.781261] sd 16:0:0:0: [sdc] Assuming drive cache: write through
  1307. [219903.789119] sd 16:0:0:0: [sdc] No Caching mode page present
  1308. [219903.789134] sd 16:0:0:0: [sdc] Assuming drive cache: write through
  1309. [219903.790406] sdc: sdc1
  1310. [219903.793489] sd 16:0:0:0: [sdc] No Caching mode page present
  1311. [219903.793505] sd 16:0:0:0: [sdc] Assuming drive cache: write through
  1312. [219903.793517] sd 16:0:0:0: [sdc] Attached SCSI removable disk
  1313. [219906.682570] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1314. [219906.686906] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  1315. [219944.146219] usb 1-1: USB disconnect, device number 29
  1316. [260006.784442] usb 1-1: new high-speed USB device number 30 using ehci_hcd
  1317. [260007.143630] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  1318. [260007.143646] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1319. [260007.143656] usb 1-1: Product: DataTraveler G3
  1320. [260007.143663] usb 1-1: Manufacturer: Kingston
  1321. [260007.143671] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  1322. [260007.145969] scsi17 : usb-storage 1-1:1.0
  1323. [260008.147029] scsi 17:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  1324. [260008.152906] sd 17:0:0:0: Attached scsi generic sg3 type 0
  1325. [260008.153871] sd 17:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  1326. [260008.154380] sd 17:0:0:0: [sdc] Write Protect is off
  1327. [260008.154387] sd 17:0:0:0: [sdc] Mode Sense: 03 00 00 00
  1328. [260008.154860] sd 17:0:0:0: [sdc] No Caching mode page present
  1329. [260008.154868] sd 17:0:0:0: [sdc] Assuming drive cache: write through
  1330. [260008.159239] sd 17:0:0:0: [sdc] No Caching mode page present
  1331. [260008.159249] sd 17:0:0:0: [sdc] Assuming drive cache: write through
  1332. [260008.160621] sdc: sdc1
  1333. [260008.164905] sd 17:0:0:0: [sdc] No Caching mode page present
  1334. [260008.164923] sd 17:0:0:0: [sdc] Assuming drive cache: write through
  1335. [260008.164935] sd 17:0:0:0: [sdc] Attached SCSI removable disk
  1336. [260012.612287] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1337. [260012.615303] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  1338. [260036.294516] usb 1-1: USB disconnect, device number 30
  1339. [260098.541530] usb 1-3.1.3: new full-speed USB device number 31 using ehci_hcd
  1340. [260098.640732] usb 1-3.1.3: New USB device found, idVendor=04f9, idProduct=0027
  1341. [260098.640748] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1342. [260098.640758] usb 1-3.1.3: Product: HL-2030 series
  1343. [260098.640767] usb 1-3.1.3: Manufacturer: Brother
  1344. [260098.640774] usb 1-3.1.3: SerialNumber: M0J298450
  1345. [260098.646137] usblp0: USB Bidirectional printer dev 31 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
  1346. [260101.812824] usb 1-3.1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
  1347. [260192.023805] usb 1-3.1.3: USB disconnect, device number 31
  1348. [260192.024715] usblp0: removed
  1349. [268692.924995] sd 2:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
  1350. [268692.925154] sd 2:0:0:0: [sdb] Cache data unavailable
  1351. [268692.925164] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  1352. [268692.925429] sd 2:0:0:0: [sdb] Cache data unavailable
  1353. [268692.925439] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  1354. [268692.935397] sdb: sdb1
  1355. [268694.679755] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1356. [268754.924831] sdb: detected capacity change from 1977614336 to 0
  1357. [290666.704198] usb 1-1: new high-speed USB device number 32 using ehci_hcd
  1358. [290667.064187] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  1359. [290667.064203] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1360. [290667.064213] usb 1-1: Product: DataTraveler G3
  1361. [290667.064220] usb 1-1: Manufacturer: Kingston
  1362. [290667.064228] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  1363. [290667.065856] scsi18 : usb-storage 1-1:1.0
  1364. [290668.066364] scsi 18:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  1365. [290668.070492] sd 18:0:0:0: Attached scsi generic sg3 type 0
  1366. [290668.071574] sd 18:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  1367. [290668.072236] sd 18:0:0:0: [sdc] Write Protect is off
  1368. [290668.072255] sd 18:0:0:0: [sdc] Mode Sense: 03 00 00 00
  1369. [290668.072809] sd 18:0:0:0: [sdc] No Caching mode page present
  1370. [290668.072823] sd 18:0:0:0: [sdc] Assuming drive cache: write through
  1371. [290668.077934] sd 18:0:0:0: [sdc] No Caching mode page present
  1372. [290668.077951] sd 18:0:0:0: [sdc] Assuming drive cache: write through
  1373. [290668.079283] sdc: sdc1
  1374. [290668.083137] sd 18:0:0:0: [sdc] No Caching mode page present
  1375. [290668.083149] sd 18:0:0:0: [sdc] Assuming drive cache: write through
  1376. [290668.083157] sd 18:0:0:0: [sdc] Attached SCSI removable disk
  1377. [290672.670910] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1378. [290672.673806] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  1379. [290702.632179] usb 1-1: USB disconnect, device number 32
  1380. [290709.977949] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  1381. [290709.977961] PM: Basic memory bitmaps created
  1382. [290709.977965] PM: Syncing filesystems ... done.
  1383. [290710.099149] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1384. [290710.112637] PM: Preallocating image memory... done (allocated 226503 pages)
  1385. [290712.361181] PM: Allocated 906012 kbytes in 2.24 seconds (404.46 MB/s)
  1386. [290712.361187] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1387. [290712.376539] Suspending console(s) (use no_console_suspend to debug)
  1388. [290712.378218] Ready to suspend
  1389. [290712.480314] ACPI handle has no context!
  1390. [290712.580219] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1391. [290713.392537] PM: freeze of devices complete after 1015.980 msecs
  1392. [290713.393543] PM: late freeze of devices complete after 0.997 msecs
  1393. [290713.393588] ACPI: Preparing to enter system sleep state S4
  1394. [290713.395915] PM: Saving platform NVS memory
  1395. [290713.414558] Disabling non-boot CPUs ...
  1396. [290713.417038] CPU 1 is now offline
  1397. [290713.418223] PM: Creating hibernation image:
  1398. [290713.420989] PM: Need to copy 190126 pages
  1399. [290713.420989] PM: Normal pages needed: 110445 + 1024, available pages: 150733
  1400. [290713.420989] PM: Restoring platform NVS memory
  1401. [290713.420989] microcode: CPU0: new patch_level=0x0500010d
  1402. [290713.426006] Enabling non-boot CPUs ...
  1403. [290713.426323] Booting Node 0 Processor 1 APIC 0x1
  1404. [290713.426327] smpboot cpu 1: start_ip = 9b000
  1405. [290713.416978] Initializing CPU#1
  1406. [290713.416978] Calibrating delay loop (skipped) already calibrated this CPU
  1407. [290713.458291] NMI watchdog enabled, takes one hw-pmu counter.
  1408. [290713.462755] microcode: CPU1: new patch_level=0x0500010d
  1409. [290713.467142] CPU1 is up
  1410. [290713.471075] ACPI: Waking up from system sleep state S4
  1411. [290713.664592] PM: early restore of devices complete after 1.364 msecs
  1412. [290713.744386] radeon 0000:00:01.0: setting latency timer to 64
  1413. [290713.744642] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  1414. [290713.744710] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  1415. [290713.745372] Ready to resume
  1416. [290713.745393] rts_pstor 0000:02:00.0: setting latency timer to 64
  1417. [290713.745401] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  1418. [290713.761029] sd 0:0:0:0: [sda] Starting disk
  1419. [290713.804086] usb usb3: root hub lost power or was reset
  1420. [290713.804230] usb usb1: root hub lost power or was reset
  1421. [290713.808245] usb usb4: root hub lost power or was reset
  1422. [290713.812303] usb usb5: root hub lost power or was reset
  1423. [290713.812402] usb usb2: root hub lost power or was reset
  1424. [290714.158060] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  1425. [290714.158652] radeon 0000:00:01.0: WB enabled
  1426. [290714.158663] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffba6c00
  1427. [290714.161285] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  1428. [290714.174968] [drm] ring test on 0 succeeded in 1 usecs
  1429. [290714.175055] [drm] ib test on ring 0 succeeded in 0 usecs
  1430. [290714.236362] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1431. [290714.236417] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1432. [290714.239218] ata1.00: configured for UDMA/100
  1433. [290714.240358] ata2.00: configured for UDMA/100
  1434. [290714.342508] restoring control 00000000-0000-0000-0000-000000000001/2/3
  1435. [290714.408097] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  1436. [290714.680172] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  1437. [290715.096879] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  1438. [290715.449090] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  1439. [290716.013264] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  1440. [290716.295911] PM: restore of devices complete after 2551.708 msecs
  1441. [290716.296188] PM: Image restored successfully.
  1442. [290716.296192] Restarting tasks ... done.
  1443. [290716.301343] PM: Basic memory bitmaps freed
  1444. [290716.301357] video LNXVIDEO:00: Restoring backlight state
  1445. [290728.067270] r8169 0000:06:00.0: eth2: link down
  1446. [290728.067320] r8169 0000:06:00.0: eth2: link down
  1447. [290728.067989] ADDRCONF(NETDEV_UP): eth2: link is not ready
  1448. [290729.708208] r8169 0000:06:00.0: eth2: link up
  1449. [290729.708574] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  1450. [290740.240278] eth2: no IPv6 routers present
  1451. [294074.128649] usb 1-3.1.4: new high-speed USB device number 33 using ehci_hcd
  1452. [294074.222645] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1453. [294074.222660] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1454. [294074.222767] usb 1-3.1.4: Product: Ext HDD 1021
  1455. [294074.222776] usb 1-3.1.4: Manufacturer: Western Digital
  1456. [294074.222784] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
  1457. [294074.224332] scsi19 : usb-storage 1-3.1.4:1.0
  1458. [294075.227377] scsi 19:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
  1459. [294075.231950] sd 19:0:0:0: Attached scsi generic sg3 type 0
  1460. [294075.233219] sd 19:0:0:0: [sdc] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
  1461. [294075.234178] sd 19:0:0:0: [sdc] Test WP failed, assume Write Enabled
  1462. [294075.235051] sd 19:0:0:0: [sdc] Asking for cache data failed
  1463. [294075.235063] sd 19:0:0:0: [sdc] Assuming drive cache: write through
  1464. [294075.238687] sd 19:0:0:0: [sdc] Test WP failed, assume Write Enabled
  1465. [294075.239555] sd 19:0:0:0: [sdc] Asking for cache data failed
  1466. [294075.239567] sd 19:0:0:0: [sdc] Assuming drive cache: write through
  1467. [294075.261069] sdc: sdc1
  1468. [294075.264592] sd 19:0:0:0: [sdc] Test WP failed, assume Write Enabled
  1469. [294075.265570] sd 19:0:0:0: [sdc] Asking for cache data failed
  1470. [294075.265588] sd 19:0:0:0: [sdc] Assuming drive cache: write through
  1471. [294075.265600] sd 19:0:0:0: [sdc] Attached SCSI disk
  1472. [294080.761713] kjournald starting. Commit interval 5 seconds
  1473. [294080.763078] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1474. [294080.764976] EXT3-fs (sdc1): using internal journal
  1475. [294080.764998] EXT3-fs (sdc1): mounted filesystem with ordered data mode
  1476. [297726.052922] usb 1-3.1.4: USB disconnect, device number 33
  1477. [297726.201560] hub 1-3.1:1.0: unable to enumerate USB device on port 4
  1478. [303339.329502] usb 1-3.1.4: new high-speed USB device number 35 using ehci_hcd
  1479. [303339.422496] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1480. [303339.422511] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1481. [303339.422522] usb 1-3.1.4: Product: Ext HDD 1021
  1482. [303339.422529] usb 1-3.1.4: Manufacturer: Western Digital
  1483. [303339.422537] usb 1-3.1.4: SerialNumber: 574D415A4137393533393539
  1484. [303339.424254] scsi20 : usb-storage 1-3.1.4:1.0
  1485. [303340.427536] scsi 20:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
  1486. [303340.431511] sd 20:0:0:0: Attached scsi generic sg3 type 0
  1487. [303340.433119] sd 20:0:0:0: [sdc] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
  1488. [303340.435046] sd 20:0:0:0: [sdc] Write Protect is off
  1489. [303340.435064] sd 20:0:0:0: [sdc] Mode Sense: 17 00 10 08
  1490. [303340.437000] sd 20:0:0:0: [sdc] No Caching mode page present
  1491. [303340.437014] sd 20:0:0:0: [sdc] Assuming drive cache: write through
  1492. [303340.444516] sd 20:0:0:0: [sdc] No Caching mode page present
  1493. [303340.444531] sd 20:0:0:0: [sdc] Assuming drive cache: write through
  1494. [303340.476543] sdc: sdc1
  1495. [303340.483902] sd 20:0:0:0: [sdc] No Caching mode page present
  1496. [303340.483920] sd 20:0:0:0: [sdc] Assuming drive cache: write through
  1497. [303340.483932] sd 20:0:0:0: [sdc] Attached SCSI disk
  1498. [303344.717269] kjournald starting. Commit interval 5 seconds
  1499. [303344.720098] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1500. [303344.722582] EXT3-fs (sdc1): using internal journal
  1501. [303344.722604] EXT3-fs (sdc1): mounted filesystem with ordered data mode
  1502. [303948.584965] usb 1-3.1.4: USB disconnect, device number 35
  1503. [310224.485922] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  1504. [310224.485933] PM: Basic memory bitmaps created
  1505. [310224.485937] PM: Syncing filesystems ... done.
  1506. [310224.761393] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1507. [310224.776708] PM: Preallocating image memory... done (allocated 226497 pages)
  1508. [310226.115924] PM: Allocated 905988 kbytes in 1.33 seconds (681.19 MB/s)
  1509. [310226.115930] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1510. [310226.132483] Suspending console(s) (use no_console_suspend to debug)
  1511. [310226.134597] Ready to suspend
  1512. [310226.135224] ACPI handle has no context!
  1513. [310226.336117] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1514. [310227.148663] PM: freeze of devices complete after 1016.162 msecs
  1515. [310227.149669] PM: late freeze of devices complete after 0.998 msecs
  1516. [310227.149715] ACPI: Preparing to enter system sleep state S4
  1517. [310227.151945] PM: Saving platform NVS memory
  1518. [310227.170573] Disabling non-boot CPUs ...
  1519. [310227.173002] CPU 1 is now offline
  1520. [310227.174075] PM: Creating hibernation image:
  1521. [310227.176954] PM: Need to copy 183295 pages
  1522. [310227.176954] PM: Normal pages needed: 104734 + 1024, available pages: 158684
  1523. [310227.176954] PM: Restoring platform NVS memory
  1524. [310227.176954] microcode: CPU0: new patch_level=0x0500010d
  1525. [310227.181857] Enabling non-boot CPUs ...
  1526. [310227.182164] Booting Node 0 Processor 1 APIC 0x1
  1527. [310227.182168] smpboot cpu 1: start_ip = 9b000
  1528. [310227.172941] Initializing CPU#1
  1529. [310227.172941] Calibrating delay loop (skipped) already calibrated this CPU
  1530. [310227.214100] NMI watchdog enabled, takes one hw-pmu counter.
  1531. [310227.218563] microcode: CPU1: new patch_level=0x0500010d
  1532. [310227.222882] CPU1 is up
  1533. [310227.226887] ACPI: Waking up from system sleep state S4
  1534. [310227.420575] PM: early restore of devices complete after 1.362 msecs
  1535. [310227.498743] radeon 0000:00:01.0: setting latency timer to 64
  1536. [310227.498782] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  1537. [310227.498853] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  1538. [310227.499705] Ready to resume
  1539. [310227.499763] rts_pstor 0000:02:00.0: setting latency timer to 64
  1540. [310227.499771] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  1541. [310227.515571] sd 0:0:0:0: [sda] Starting disk
  1542. [310227.556197] usb usb3: root hub lost power or was reset
  1543. [310227.560262] usb usb4: root hub lost power or was reset
  1544. [310227.564321] usb usb5: root hub lost power or was reset
  1545. [310227.564429] usb usb1: root hub lost power or was reset
  1546. [310227.564480] usb usb2: root hub lost power or was reset
  1547. [310227.912215] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  1548. [310227.913085] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  1549. [310227.913533] radeon 0000:00:01.0: WB enabled
  1550. [310227.913540] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffba6c00
  1551. [310227.929833] [drm] ring test on 0 succeeded in 1 usecs
  1552. [310227.929922] [drm] ib test on ring 0 succeeded in 0 usecs
  1553. [310227.988394] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1554. [310227.988448] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1555. [310227.991211] ata1.00: configured for UDMA/100
  1556. [310227.992319] ata2.00: configured for UDMA/100
  1557. [310228.156214] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  1558. [310228.335525] restoring control 00000000-0000-0000-0000-000000000001/2/3
  1559. [310228.424169] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  1560. [310228.840798] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  1561. [310229.193532] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  1562. [310229.753090] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  1563. [310230.035189] PM: restore of devices complete after 2536.653 msecs
  1564. [310230.035437] PM: Image restored successfully.
  1565. [310230.035441] Restarting tasks ... done.
  1566. [310230.039625] PM: Basic memory bitmaps freed
  1567. [310230.039638] video LNXVIDEO:00: Restoring backlight state
  1568. [310239.451401] r8169 0000:06:00.0: eth2: link down
  1569. [310239.451453] r8169 0000:06:00.0: eth2: link down
  1570. [310239.452936] ADDRCONF(NETDEV_UP): eth2: link is not ready
  1571. [310241.061258] r8169 0000:06:00.0: eth2: link up
  1572. [310241.061799] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  1573. [310251.168046] eth2: no IPv6 routers present
  1574. [335567.945035] usb 1-3.4: new high-speed USB device number 36 using ehci_hcd
  1575. [335568.173006] usb 1-3.4: New USB device found, idVendor=0e21, idProduct=0860
  1576. [335568.173022] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1577. [335568.173032] usb 1-3.4: Product: COWON D2
  1578. [335568.173040] usb 1-3.4: Manufacturer: COWON Systems, Inc.
  1579. [335568.173048] usb 1-3.4: SerialNumber: 0236D0003D78D9010190217184743020
  1580. [335568.184745] scsi21 : usb-storage 1-3.4:1.0
  1581. [335569.201658] scsi 21:0:0:0: Direct-Access COWON D2+ 0100 PQ: 0 ANSI: 0
  1582. [335569.203627] scsi 21:0:0:1: Direct-Access COWON D2+ 0100 PQ: 0 ANSI: 0
  1583. [335569.207784] sd 21:0:0:0: Attached scsi generic sg3 type 0
  1584. [335569.209179] sd 21:0:0:0: [sdc] 32292864 512-byte logical blocks: (16.5 GB/15.3 GiB)
  1585. [335569.209808] sd 21:0:0:0: [sdc] Write Protect is off
  1586. [335569.209826] sd 21:0:0:0: [sdc] Mode Sense: 37 00 00 08
  1587. [335569.210252] sd 21:0:0:0: [sdc] No Caching mode page present
  1588. [335569.210265] sd 21:0:0:0: [sdc] Assuming drive cache: write through
  1589. [335569.212728] sd 21:0:0:1: Attached scsi generic sg4 type 0
  1590. [335569.215778] sd 21:0:0:0: [sdc] No Caching mode page present
  1591. [335569.215794] sd 21:0:0:0: [sdc] Assuming drive cache: write through
  1592. [335569.220516] sdc: sdc1
  1593. [335569.223347] sd 21:0:0:1: [sdd] Attached SCSI removable disk
  1594. [335569.225164] sd 21:0:0:0: [sdc] No Caching mode page present
  1595. [335569.225182] sd 21:0:0:0: [sdc] Assuming drive cache: write through
  1596. [335569.225195] sd 21:0:0:0: [sdc] Attached SCSI removable disk
  1597. [335575.131920] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1598. [337121.405459] usb 1-3.1.4: new high-speed USB device number 37 using ehci_hcd
  1599. [337121.498076] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1600. [337121.498091] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1601. [337121.498101] usb 1-3.1.4: Product: Ext HDD 1021
  1602. [337121.498109] usb 1-3.1.4: Manufacturer: Western Digital
  1603. [337121.498117] usb 1-3.1.4: SerialNumber: 574D415A4137393533393539
  1604. [337121.501083] scsi22 : usb-storage 1-3.1.4:1.0
  1605. [337122.518863] scsi 22:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
  1606. [337122.521584] sd 22:0:0:0: [sde] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
  1607. [337122.523475] sd 22:0:0:0: [sde] Write Protect is off
  1608. [337122.523487] sd 22:0:0:0: [sde] Mode Sense: 17 00 10 08
  1609. [337122.525383] sd 22:0:0:0: [sde] No Caching mode page present
  1610. [337122.525406] sd 22:0:0:0: [sde] Assuming drive cache: write through
  1611. [337122.526851] sd 22:0:0:0: Attached scsi generic sg5 type 0
  1612. [337122.531093] sd 22:0:0:0: [sde] No Caching mode page present
  1613. [337122.531105] sd 22:0:0:0: [sde] Assuming drive cache: write through
  1614. [337122.554279] sde: sde1
  1615. [337122.560213] sd 22:0:0:0: [sde] No Caching mode page present
  1616. [337122.560225] sd 22:0:0:0: [sde] Assuming drive cache: write through
  1617. [337122.560233] sd 22:0:0:0: [sde] Attached SCSI disk
  1618. [337124.865929] kjournald starting. Commit interval 5 seconds
  1619. [337124.867692] EXT3-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended
  1620. [337124.869825] EXT3-fs (sde1): using internal journal
  1621. [337124.869840] EXT3-fs (sde1): recovery complete
  1622. [337124.870402] EXT3-fs (sde1): mounted filesystem with ordered data mode
  1623. [337161.904928] usb 1-3.1.4: USB disconnect, device number 37
  1624. [337251.693509] usb 1-3.1.4: new high-speed USB device number 38 using ehci_hcd
  1625. [337251.787003] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1626. [337251.787018] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1627. [337251.787028] usb 1-3.1.4: Product: Ext HDD 1021
  1628. [337251.787036] usb 1-3.1.4: Manufacturer: Western Digital
  1629. [337251.787044] usb 1-3.1.4: SerialNumber: 5743415A4132323331353038
  1630. [337251.789213] scsi23 : usb-storage 1-3.1.4:1.0
  1631. [337252.790805] scsi 23:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
  1632. [337252.795758] sd 23:0:0:0: Attached scsi generic sg5 type 0
  1633. [337252.798453] sd 23:0:0:0: [sde] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
  1634. [337252.799407] sd 23:0:0:0: [sde] Test WP failed, assume Write Enabled
  1635. [337252.800659] sd 23:0:0:0: [sde] Asking for cache data failed
  1636. [337252.800672] sd 23:0:0:0: [sde] Assuming drive cache: write through
  1637. [337252.814387] sd 23:0:0:0: [sde] Test WP failed, assume Write Enabled
  1638. [337252.815762] sd 23:0:0:0: [sde] Asking for cache data failed
  1639. [337252.815774] sd 23:0:0:0: [sde] Assuming drive cache: write through
  1640. [337252.834836] sde: sde1
  1641. [337252.838877] sd 23:0:0:0: [sde] Test WP failed, assume Write Enabled
  1642. [337252.839867] sd 23:0:0:0: [sde] Asking for cache data failed
  1643. [337252.839877] sd 23:0:0:0: [sde] Assuming drive cache: write through
  1644. [337252.839887] sd 23:0:0:0: [sde] Attached SCSI disk
  1645. [337253.943865] kjournald starting. Commit interval 5 seconds
  1646. [337253.945318] EXT3-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended
  1647. [337253.947190] EXT3-fs (sde1): using internal journal
  1648. [337253.947206] EXT3-fs (sde1): recovery complete
  1649. [337253.947950] EXT3-fs (sde1): mounted filesystem with ordered data mode
  1650. [339513.208163] usb 1-3.1.4: USB disconnect, device number 38
  1651. [339598.133463] usb 1-3.1.4: new high-speed USB device number 39 using ehci_hcd
  1652. [339598.226353] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1653. [339598.226369] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1654. [339598.226379] usb 1-3.1.4: Product: Ext HDD 1021
  1655. [339598.226387] usb 1-3.1.4: Manufacturer: Western Digital
  1656. [339598.226395] usb 1-3.1.4: SerialNumber: 574D415A4137393533393539
  1657. [339598.228337] scsi24 : usb-storage 1-3.1.4:1.0
  1658. [339599.233517] scsi 24:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
  1659. [339599.237496] sd 24:0:0:0: Attached scsi generic sg5 type 0
  1660. [339599.238516] sd 24:0:0:0: [sde] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB)
  1661. [339599.240361] sd 24:0:0:0: [sde] Write Protect is off
  1662. [339599.240370] sd 24:0:0:0: [sde] Mode Sense: 17 00 10 08
  1663. [339599.242214] sd 24:0:0:0: [sde] No Caching mode page present
  1664. [339599.242222] sd 24:0:0:0: [sde] Assuming drive cache: write through
  1665. [339599.252743] sd 24:0:0:0: [sde] No Caching mode page present
  1666. [339599.252755] sd 24:0:0:0: [sde] Assuming drive cache: write through
  1667. [339599.287304] sde: sde1
  1668. [339599.294361] sd 24:0:0:0: [sde] No Caching mode page present
  1669. [339599.294373] sd 24:0:0:0: [sde] Assuming drive cache: write through
  1670. [339599.294381] sd 24:0:0:0: [sde] Attached SCSI disk
  1671. [339600.275625] kjournald starting. Commit interval 5 seconds
  1672. [339600.277592] EXT3-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended
  1673. [339600.280228] EXT3-fs (sde1): using internal journal
  1674. [339600.280517] EXT3-fs (sde1): mounted filesystem with ordered data mode
  1675. [342284.748507] usb 1-3.1.3: new full-speed USB device number 40 using ehci_hcd
  1676. [342284.848083] usb 1-3.1.3: New USB device found, idVendor=04f9, idProduct=0027
  1677. [342284.848100] usb 1-3.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1678. [342284.848111] usb 1-3.1.3: Product: HL-2030 series
  1679. [342284.848119] usb 1-3.1.3: Manufacturer: Brother
  1680. [342284.848127] usb 1-3.1.3: SerialNumber: M0J298450
  1681. [342284.852700] usblp0: USB Bidirectional printer dev 40 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
  1682. [342301.917863] usb 1-3.1.3: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
  1683. [342410.742225] usb 1-3.1.3: USB disconnect, device number 40
  1684. [342410.742654] usblp0: removed
  1685. [342875.832734] usb 1-3.1.4: USB disconnect, device number 39
  1686. [358754.422258] usb 1-3.4: USB disconnect, device number 36
  1687. [360512.853798] usb 1-3.4: new high-speed USB device number 41 using ehci_hcd
  1688. [360513.080147] usb 1-3.4: New USB device found, idVendor=0e21, idProduct=0860
  1689. [360513.080162] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1690. [360513.080172] usb 1-3.4: Product: COWON D2
  1691. [360513.080180] usb 1-3.4: Manufacturer: COWON Systems, Inc.
  1692. [360513.080188] usb 1-3.4: SerialNumber: 0236D0003D78D9010190217184743020
  1693. [360513.091699] scsi25 : usb-storage 1-3.4:1.0
  1694. [360514.107297] scsi 25:0:0:0: Direct-Access COWON D2+ 0100 PQ: 0 ANSI: 0
  1695. [360514.107769] scsi 25:0:0:1: Direct-Access COWON D2+ 0100 PQ: 0 ANSI: 0
  1696. [360514.112212] sd 25:0:0:0: Attached scsi generic sg3 type 0
  1697. [360514.112292] sd 25:0:0:0: [sdc] 32292864 512-byte logical blocks: (16.5 GB/15.3 GiB)
  1698. [360514.112796] sd 25:0:0:0: [sdc] Write Protect is off
  1699. [360514.112809] sd 25:0:0:0: [sdc] Mode Sense: 37 00 00 08
  1700. [360514.113277] sd 25:0:0:0: [sdc] No Caching mode page present
  1701. [360514.113290] sd 25:0:0:0: [sdc] Assuming drive cache: write through
  1702. [360514.115314] sd 25:0:0:1: Attached scsi generic sg4 type 0
  1703. [360514.120056] sd 25:0:0:0: [sdc] No Caching mode page present
  1704. [360514.120069] sd 25:0:0:0: [sdc] Assuming drive cache: write through
  1705. [360514.120768] sd 25:0:0:1: [sdd] Attached SCSI removable disk
  1706. [360514.121960] sdc: sdc1
  1707. [360514.124633] sd 25:0:0:0: [sdc] No Caching mode page present
  1708. [360514.124643] sd 25:0:0:0: [sdc] Assuming drive cache: write through
  1709. [360514.124651] sd 25:0:0:0: [sdc] Attached SCSI removable disk
  1710. [360515.625927] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1711. [360528.469223] usb 1-3.1.4: new high-speed USB device number 42 using ehci_hcd
  1712. [360528.561833] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1713. [360528.561848] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1714. [360528.561858] usb 1-3.1.4: Product: Ext HDD 1021
  1715. [360528.561866] usb 1-3.1.4: Manufacturer: Western Digital
  1716. [360528.561874] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
  1717. [360528.565176] scsi26 : usb-storage 1-3.1.4:1.0
  1718. [360529.579199] scsi 26:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
  1719. [360529.581916] sd 26:0:0:0: Attached scsi generic sg5 type 0
  1720. [360529.584369] sd 26:0:0:0: [sde] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
  1721. [360529.585334] sd 26:0:0:0: [sde] Test WP failed, assume Write Enabled
  1722. [360529.586197] sd 26:0:0:0: [sde] Asking for cache data failed
  1723. [360529.586205] sd 26:0:0:0: [sde] Assuming drive cache: write through
  1724. [360529.594141] sd 26:0:0:0: [sde] Test WP failed, assume Write Enabled
  1725. [360529.596375] sd 26:0:0:0: [sde] Asking for cache data failed
  1726. [360529.596390] sd 26:0:0:0: [sde] Assuming drive cache: write through
  1727. [360529.613290] sde: sde1
  1728. [360529.616182] sd 26:0:0:0: [sde] Test WP failed, assume Write Enabled
  1729. [360529.617088] sd 26:0:0:0: [sde] Asking for cache data failed
  1730. [360529.617098] sd 26:0:0:0: [sde] Assuming drive cache: write through
  1731. [360529.617106] sd 26:0:0:0: [sde] Attached SCSI disk
  1732. [360531.381900] kjournald starting. Commit interval 5 seconds
  1733. [360531.383356] EXT3-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended
  1734. [360531.385636] EXT3-fs (sde1): using internal journal
  1735. [360531.385659] EXT3-fs (sde1): mounted filesystem with ordered data mode
  1736. [361383.193043] usb 1-3.4: USB disconnect, device number 41
  1737. [361391.898261] usb 1-3.1.4: USB disconnect, device number 42
  1738. [361392.109376] usb 1-3.1.4: new high-speed USB device number 43 using ehci_hcd
  1739. [361392.202870] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1740. [361392.202886] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1741. [361392.202896] usb 1-3.1.4: Product: Ext HDD 1021
  1742. [361392.202904] usb 1-3.1.4: Manufacturer: Western Digital
  1743. [361392.202912] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
  1744. [361392.205202] scsi27 : usb-storage 1-3.1.4:1.0
  1745. [361392.922659] usb 1-3.1.4: USB disconnect, device number 43
  1746. [362014.644213] usb 1-1: new high-speed USB device number 44 using ehci_hcd
  1747. [362015.003549] usb 1-1: New USB device found, idVendor=0951, idProduct=1643
  1748. [362015.003565] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1749. [362015.003575] usb 1-1: Product: DataTraveler G3
  1750. [362015.003583] usb 1-1: Manufacturer: Kingston
  1751. [362015.003591] usb 1-1: SerialNumber: 001CC05FE935F0A0B9281337
  1752. [362015.005526] scsi28 : usb-storage 1-1:1.0
  1753. [362016.006730] scsi 28:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
  1754. [362016.011218] sd 28:0:0:0: Attached scsi generic sg3 type 0
  1755. [362016.014983] sd 28:0:0:0: [sdc] 7557704 512-byte logical blocks: (3.86 GB/3.60 GiB)
  1756. [362016.015544] sd 28:0:0:0: [sdc] Write Protect is off
  1757. [362016.015556] sd 28:0:0:0: [sdc] Mode Sense: 03 00 00 00
  1758. [362016.016240] sd 28:0:0:0: [sdc] No Caching mode page present
  1759. [362016.016251] sd 28:0:0:0: [sdc] Assuming drive cache: write through
  1760. [362016.026473] sd 28:0:0:0: [sdc] No Caching mode page present
  1761. [362016.026491] sd 28:0:0:0: [sdc] Assuming drive cache: write through
  1762. [362016.027769] sdc: sdc1
  1763. [362016.030690] sd 28:0:0:0: [sdc] No Caching mode page present
  1764. [362016.030705] sd 28:0:0:0: [sdc] Assuming drive cache: write through
  1765. [362016.030716] sd 28:0:0:0: [sdc] Attached SCSI removable disk
  1766. [362017.076045] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
  1767. [362017.078802] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  1768. [362197.759274] usb 1-1: USB disconnect, device number 44
  1769. [362237.125909] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  1770. [362237.125921] PM: Basic memory bitmaps created
  1771. [362237.125925] PM: Syncing filesystems ... done.
  1772. [362237.272818] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1773. [362237.288558] PM: Preallocating image memory... done (allocated 226503 pages)
  1774. [362238.241070] PM: Allocated 906012 kbytes in 0.95 seconds (953.69 MB/s)
  1775. [362238.241077] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1776. [362238.256580] Suspending console(s) (use no_console_suspend to debug)
  1777. [362238.258245] Ready to suspend
  1778. [362238.258907] ACPI handle has no context!
  1779. [362238.460316] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1780. [362239.272658] PM: freeze of devices complete after 1016.060 msecs
  1781. [362239.273664] PM: late freeze of devices complete after 0.999 msecs
  1782. [362239.273710] ACPI: Preparing to enter system sleep state S4
  1783. [362239.275942] PM: Saving platform NVS memory
  1784. [362239.294468] Disabling non-boot CPUs ...
  1785. [362239.297024] CPU 1 is now offline
  1786. [362239.298256] PM: Creating hibernation image:
  1787. [362239.300976] PM: Need to copy 182196 pages
  1788. [362239.300976] PM: Normal pages needed: 94203 + 1024, available pages: 150351
  1789. [362239.300976] PM: Restoring platform NVS memory
  1790. [362239.300976] microcode: CPU0: new patch_level=0x0500010d
  1791. [362239.306038] Enabling non-boot CPUs ...
  1792. [362239.306350] Booting Node 0 Processor 1 APIC 0x1
  1793. [362239.306354] smpboot cpu 1: start_ip = 9b000
  1794. [362239.296962] Initializing CPU#1
  1795. [362239.296962] Calibrating delay loop (skipped) already calibrated this CPU
  1796. [362239.338338] NMI watchdog enabled, takes one hw-pmu counter.
  1797. [362239.342803] microcode: CPU1: new patch_level=0x0500010d
  1798. [362239.347158] CPU1 is up
  1799. [362239.350912] ACPI: Waking up from system sleep state S4
  1800. [362239.544580] PM: early restore of devices complete after 1.402 msecs
  1801. [362239.621719] radeon 0000:00:01.0: setting latency timer to 64
  1802. [362239.621761] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  1803. [362239.621832] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  1804. [362239.622686] Ready to resume
  1805. [362239.622745] rts_pstor 0000:02:00.0: setting latency timer to 64
  1806. [362239.622753] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  1807. [362239.637439] sd 0:0:0:0: [sda] Starting disk
  1808. [362239.680251] usb usb3: root hub lost power or was reset
  1809. [362239.680396] usb usb1: root hub lost power or was reset
  1810. [362239.684417] usb usb4: root hub lost power or was reset
  1811. [362239.688476] usb usb5: root hub lost power or was reset
  1812. [362239.688576] usb usb2: root hub lost power or was reset
  1813. [362240.033314] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  1814. [362240.033736] radeon 0000:00:01.0: WB enabled
  1815. [362240.033743] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffaaec00
  1816. [362240.036289] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  1817. [362240.050053] [drm] ring test on 0 succeeded in 1 usecs
  1818. [362240.050140] [drm] ib test on ring 0 succeeded in 0 usecs
  1819. [362240.112446] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1820. [362240.112499] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1821. [362240.115524] ata1.00: configured for UDMA/100
  1822. [362240.116459] ata2.00: configured for UDMA/100
  1823. [362240.280402] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  1824. [362240.459405] restoring control 00000000-0000-0000-0000-000000000001/2/3
  1825. [362240.548195] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  1826. [362240.964631] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  1827. [362241.317374] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  1828. [362241.885055] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  1829. [362242.167951] PM: restore of devices complete after 2546.443 msecs
  1830. [362242.168226] PM: Image restored successfully.
  1831. [362242.168231] Restarting tasks ... done.
  1832. [362242.172267] PM: Basic memory bitmaps freed
  1833. [362242.172282] video LNXVIDEO:00: Restoring backlight state
  1834. [362249.347383] r8169 0000:06:00.0: eth2: link down
  1835. [362249.347427] r8169 0000:06:00.0: eth2: link down
  1836. [362249.349128] ADDRCONF(NETDEV_UP): eth2: link is not ready
  1837. [362250.999616] r8169 0000:06:00.0: eth2: link up
  1838. [362251.000195] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  1839. [362261.152262] eth2: no IPv6 routers present
  1840. [362860.921277] usb 1-3.4: new high-speed USB device number 45 using ehci_hcd
  1841. [362861.149314] usb 1-3.4: New USB device found, idVendor=0e21, idProduct=0860
  1842. [362861.149330] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1843. [362861.149341] usb 1-3.4: Product: COWON D2
  1844. [362861.149348] usb 1-3.4: Manufacturer: COWON Systems, Inc.
  1845. [362861.149356] usb 1-3.4: SerialNumber: 0236D0003D78D9010190217184743020
  1846. [362861.160449] scsi29 : usb-storage 1-3.4:1.0
  1847. [362862.177711] scsi 29:0:0:0: Direct-Access COWON D2+ 0100 PQ: 0 ANSI: 0
  1848. [362862.179263] scsi 29:0:0:1: Direct-Access COWON D2+ 0100 PQ: 0 ANSI: 0
  1849. [362862.183310] sd 29:0:0:0: Attached scsi generic sg3 type 0
  1850. [362862.185762] sd 29:0:0:0: [sdc] 32292864 512-byte logical blocks: (16.5 GB/15.3 GiB)
  1851. [362862.186231] sd 29:0:0:0: [sdc] Write Protect is off
  1852. [362862.186245] sd 29:0:0:0: [sdc] Mode Sense: 37 00 00 08
  1853. [362862.186628] sd 29:0:0:1: Attached scsi generic sg4 type 0
  1854. [362862.186691] sd 29:0:0:0: [sdc] No Caching mode page present
  1855. [362862.186704] sd 29:0:0:0: [sdc] Assuming drive cache: write through
  1856. [362862.190186] sd 29:0:0:0: [sdc] No Caching mode page present
  1857. [362862.190202] sd 29:0:0:0: [sdc] Assuming drive cache: write through
  1858. [362862.191507] sdc: sdc1
  1859. [362862.197453] sd 29:0:0:1: [sdd] Attached SCSI removable disk
  1860. [362862.198684] sd 29:0:0:0: [sdc] No Caching mode page present
  1861. [362862.198696] sd 29:0:0:0: [sdc] Assuming drive cache: write through
  1862. [362862.198707] sd 29:0:0:0: [sdc] Attached SCSI removable disk
  1863. [362863.481313] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1864. [362872.441559] usb 1-3.1.4: new high-speed USB device number 46 using ehci_hcd
  1865. [362872.534804] usb 1-3.1.4: New USB device found, idVendor=1058, idProduct=1021
  1866. [362872.534819] usb 1-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1867. [362872.534830] usb 1-3.1.4: Product: Ext HDD 1021
  1868. [362872.534838] usb 1-3.1.4: Manufacturer: Western Digital
  1869. [362872.534846] usb 1-3.1.4: SerialNumber: 5743415A4131343230303138
  1870. [362872.537481] scsi30 : usb-storage 1-3.1.4:1.0
  1871. [362873.538450] scsi 30:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
  1872. [362873.545213] sd 30:0:0:0: Attached scsi generic sg5 type 0
  1873. [362873.546427] sd 30:0:0:0: [sde] 2930272256 512-byte logical blocks: (1.50 TB/1.36 TiB)
  1874. [362873.553330] sd 30:0:0:0: [sde] Test WP failed, assume Write Enabled
  1875. [362873.555079] sd 30:0:0:0: [sde] Asking for cache data failed
  1876. [362873.555091] sd 30:0:0:0: [sde] Assuming drive cache: write through
  1877. [362873.558080] sd 30:0:0:0: [sde] Test WP failed, assume Write Enabled
  1878. [362873.559176] sd 30:0:0:0: [sde] Asking for cache data failed
  1879. [362873.559187] sd 30:0:0:0: [sde] Assuming drive cache: write through
  1880. [362873.579371] sde: sde1
  1881. [362873.582204] sd 30:0:0:0: [sde] Test WP failed, assume Write Enabled
  1882. [362873.583157] sd 30:0:0:0: [sde] Asking for cache data failed
  1883. [362873.583166] sd 30:0:0:0: [sde] Assuming drive cache: write through
  1884. [362873.583175] sd 30:0:0:0: [sde] Attached SCSI disk
  1885. [362874.424137] kjournald starting. Commit interval 5 seconds
  1886. [362874.425457] EXT3-fs (sde1): warning: maximal mount count reached, running e2fsck is recommended
  1887. [362874.427791] EXT3-fs (sde1): using internal journal
  1888. [362874.427812] EXT3-fs (sde1): mounted filesystem with ordered data mode
  1889. [372647.068061] usb 1-3.4: USB disconnect, device number 45
  1890. [372654.493909] usb 1-3.1.4: USB disconnect, device number 46
  1891. [372679.620513] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  1892. [372679.620525] PM: Basic memory bitmaps created
  1893. [372679.620530] PM: Syncing filesystems ... done.
  1894. [372679.761567] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1895. [372679.776538] PM: Preallocating image memory... done (allocated 226503 pages)
  1896. [372682.225885] PM: Allocated 906012 kbytes in 2.44 seconds (371.31 MB/s)
  1897. [372682.225891] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1898. [372682.240617] Suspending console(s) (use no_console_suspend to debug)
  1899. [372682.241589] Ready to suspend
  1900. [372682.241948] ACPI handle has no context!
  1901. [372682.444166] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  1902. [372683.256637] PM: freeze of devices complete after 1016.003 msecs
  1903. [372683.257612] PM: late freeze of devices complete after 0.966 msecs
  1904. [372683.257657] ACPI: Preparing to enter system sleep state S4
  1905. [372683.259892] PM: Saving platform NVS memory
  1906. [372683.278874] Disabling non-boot CPUs ...
  1907. [372683.384306] CPU 1 is now offline
  1908. [372683.385445] PM: Creating hibernation image:
  1909. [372683.388227] PM: Need to copy 189244 pages
  1910. [372683.388227] PM: Normal pages needed: 119552 + 1024, available pages: 161604
  1911. [372683.388227] PM: Restoring platform NVS memory
  1912. [372683.388227] microcode: CPU0: new patch_level=0x0500010d
  1913. [372683.393238] Enabling non-boot CPUs ...
  1914. [372683.393547] Booting Node 0 Processor 1 APIC 0x1
  1915. [372683.393551] smpboot cpu 1: start_ip = 9b000
  1916. [372683.281313] Initializing CPU#1
  1917. [372683.281313] Calibrating delay loop (skipped) already calibrated this CPU
  1918. [372683.425577] NMI watchdog enabled, takes one hw-pmu counter.
  1919. [372683.429814] microcode: CPU1: new patch_level=0x0500010d
  1920. [372683.434309] CPU1 is up
  1921. [372683.438274] ACPI: Waking up from system sleep state S4
  1922. [372683.632583] PM: early restore of devices complete after 1.363 msecs
  1923. [372683.713055] radeon 0000:00:01.0: setting latency timer to 64
  1924. [372683.713294] snd_hda_intel 0000:00:01.1: setting latency timer to 64
  1925. [372683.713363] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
  1926. [372683.714069] Ready to resume
  1927. [372683.714089] rts_pstor 0000:02:00.0: setting latency timer to 64
  1928. [372683.714097] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 20
  1929. [372683.729702] sd 0:0:0:0: [sda] Starting disk
  1930. [372683.772252] usb usb3: root hub lost power or was reset
  1931. [372683.776317] usb usb4: root hub lost power or was reset
  1932. [372683.780376] usb usb5: root hub lost power or was reset
  1933. [372683.780484] usb usb1: root hub lost power or was reset
  1934. [372683.780534] usb usb2: root hub lost power or was reset
  1935. [372684.127267] [drm] PCIE GART of 512M enabled (table at 0x0000000000F88000).
  1936. [372684.127691] radeon 0000:00:01.0: WB enabled
  1937. [372684.127698] [drm] fence driver on ring 0 use gpu addr 0x18000c00 and cpu addr 0xffaaec00
  1938. [372684.128269] usb 1-3: reset high-speed USB device number 20 using ehci_hcd
  1939. [372684.144085] [drm] ring test on 0 succeeded in 1 usecs
  1940. [372684.144180] [drm] ib test on ring 0 succeeded in 0 usecs
  1941. [372684.204366] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  1942. [372684.204419] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  1943. [372684.207286] ata1.00: configured for UDMA/100
  1944. [372684.208612] ata2.00: configured for UDMA/100
  1945. [372684.372111] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
  1946. [372684.550735] restoring control 00000000-0000-0000-0000-000000000001/2/3
  1947. [372684.640190] usb 4-2: reset full-speed USB device number 2 using ohci_hcd
  1948. [372685.057008] usb 1-3.3: reset low-speed USB device number 22 using ehci_hcd
  1949. [372685.409334] usb 1-3.1: reset high-speed USB device number 21 using ehci_hcd
  1950. [372685.981142] usb 1-3.1.2: reset low-speed USB device number 23 using ehci_hcd
  1951. [372686.264178] PM: restore of devices complete after 2551.331 msecs
  1952. [372686.264419] PM: Image restored successfully.
  1953. [372686.264423] Restarting tasks ... done.
  1954. [372686.267095] PM: Basic memory bitmaps freed
  1955. [372686.267122] video LNXVIDEO:00: Restoring backlight state
  1956. [372694.810991] r8169 0000:06:00.0: eth2: link down
  1957. [372694.811045] r8169 0000:06:00.0: eth2: link down
  1958. [372694.811653] ADDRCONF(NETDEV_UP): eth2: link is not ready
  1959. [372696.454773] r8169 0000:06:00.0: eth2: link up
  1960. [372696.455275] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!